CISCO-TBRIDGE-DEV-IF-MIB.mib object view, vendor Cisco
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file CISCO-TBRIDGE-DEV-IF-MIB and use it to monitor vendor specific OID's.
CISCO-TBRIDGE-DEV-IF-MIB file content
Object view of CISCO-TBRIDGE-DEV-IF-MIB:
| Scalar Object |
| ctbrDevInterfaceEntry |
.1.3.6.1.4.1.9.9.269.1.1.1.1 |
|
Each entry provides MAC and IP address related
configuration information of an interface.
|
| Tabular Object |
| ctbrDefaultPhyAddress |
.1.3.6.1.4.1.9.9.269.1.1.1.1.1 |
|
The default, factory-assigned MAC address of
the interface. Guaranteed to be unique across
all IEEE 802 devices.
|
| ctbrPhyAddress |
.1.3.6.1.4.1.9.9.269.1.1.1.1.2 |
|
The MAC address to be used by the interface.
If ctbrDefaultPhyAddress is used,
this is '00:00:00:00:00:00'.
|
| ctbrDefaultIpAddrType |
.1.3.6.1.4.1.9.9.269.1.1.1.1.3 |
|
The IP address type of the
ctbrDefaultIpAddress object.
|
| ctbrDefaultIpAddress |
.1.3.6.1.4.1.9.9.269.1.1.1.1.4 |
|
The default IP address of the interface. If BOOTP
or DHCP is enabled, this may be overridden by the
BOOTP or DHCP server.
|
| ctbrDefaultIpMaskType |
.1.3.6.1.4.1.9.9.269.1.1.1.1.5 |
|
The IP address type of the
ctbrDefaultIpMask object.
|
| ctbrDefaultIpMask |
.1.3.6.1.4.1.9.9.269.1.1.1.1.6 |
|
The default IP netmask of the interface. If BOOTP
or DHCP is enabled, this may be overridden by the
BOOTP or DHCP server.
|
| ctbrIpAddressType |
.1.3.6.1.4.1.9.9.269.1.1.1.1.7 |
|
The IP address type of the
ctbrIpAddress object.
|
| ctbrIpAddress |
.1.3.6.1.4.1.9.9.269.1.1.1.1.8 |
|
The IP address currently in use by the interface.
|
| ctbrIpMaskType |
.1.3.6.1.4.1.9.9.269.1.1.1.1.9 |
|
The IP address type of the ctbrIpMask
object.
|
| ctbrIpMask |
.1.3.6.1.4.1.9.9.269.1.1.1.1.10 |
|
The IP netmask currently in use by the interface.
|
| ctbrMSDUMaxLength |
.1.3.6.1.4.1.9.9.269.1.1.1.1.11 |
|
Maximum length of the data portion of a packet
for this particular interface. This is the
maximum MAC Service Data Unit length, which is
greater than or equal to ifMtu, depending on
the configured MAC-level encapsulation.
|
| Table |
| ctbrDevInterfaceTable |
.1.3.6.1.4.1.9.9.269.1.1.1 |
|
This table provides configuration and information
of the device interfaces supporting transparent
bridging. This table has a sparse dependent
relationship with the ifTable.
|
| Object Identifier |
| ciscoTBridgeDevIfMIB |
.1.3.6.1.4.1.9.9.269 |
|
This MIB module provides network management support
for configuration and status information of devices
supporting transparent bridging functions.
|
| ciscoTBridgeDevIfMIBObjects |
.1.3.6.1.4.1.9.9.269.1 |
| ctbrDevInterface |
.1.3.6.1.4.1.9.9.269.1.1 |
| ciscoTBridgeDevIfMIBConformance |
.1.3.6.1.4.1.9.9.269.2 |
| ciscoTBridgeDevIfMIBCompliances |
.1.3.6.1.4.1.9.9.269.2.1 |
| ciscoTBridgeDevIfMIBGroups |
.1.3.6.1.4.1.9.9.269.2.2 |
| Group |
| ctbrDevIfConfigGroup |
.1.3.6.1.4.1.9.9.269.2.2.1 |
|
Information to support configuration of network
interfaces.
|
