CISCO-TRANSACTION-CONNECTION-MIB device MIB details by Cisco

CISCO-TRANSACTION-CONNECTION-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-TRANSACTION-CONNECTION-MIB.

Vendor:	Cisco
Mib:	CISCO-TRANSACTION-CONNECTION-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- Cisco Transaction Connection
--
-- Copyright (c) 1996-1999 by StarQuest Software, Inc.
-- All rights reserved.
-- *****************************************************************
--
-- This mib was not extracted from any RFC

CISCO-TRANSACTION-CONNECTION-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY,
        OBJECT-TYPE,
        OBJECT-IDENTITY,
        IpAddress
            FROM SNMPv2-SMI
            
        DateAndTime,
        TimeInterval,
        TruthValue
            FROM SNMPv2-TC
            
        MODULE-COMPLIANCE,
        OBJECT-GROUP
            FROM SNMPv2-CONF

        Unsigned32
            FROM CISCO-TC

        SnmpAdminString
            FROM SNMP-FRAMEWORK-MIB

        ciscoMgmt
            FROM CISCO-SMI;

ciscoTransactionConnectionMIB MODULE-IDENTITY
    LAST-UPDATED    "9908190000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO    "Cisco Systems
            Customer Service

            Postal:    170 W. Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS
            E-mail: ctrc-dev@external.cisco.com"
    DESCRIPTION "The MIB module for retrieving Cisco Transaction Connection
        configuration and status.  Cisco Transaction Connection routes
        transactions between IBM CICS (Customer Information Control System)
        hosts and clients using the ISC (Inter-System Communication)
        protocol."
    ::=     { ciscoMgmt 144 }



ciscoTransConnMIBObjects OBJECT IDENTIFIER ::= { ciscoTransactionConnectionMIB 1 }


--
-- License Information
--

ctcLicense OBJECT-IDENTITY
    STATUS      current 
    DESCRIPTION "An object containing a Cisco Transaction Connection
        license."
    ::=        { ciscoTransConnMIBObjects 1 }

ctcLicenseState OBJECT-TYPE
    SYNTAX      INTEGER {
                        unconfigured(1),
                        notValidatedYet(2),
                        badKey(3),
                        licenseOK(4),
                        expired(5)
                        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The state of the Transaction Connection license.
            unconfigured    : A license key has not been provided.
            notValidatedYet : A license key has been provided, but it cannot
                              be validated until a server is created.
            
            When the first server is created, the license key is validated,
            changing the license state to one of the following.
            
            badKey          : The content of ctcLicenseKey is not a valid
                              license key.
            licenseOK       : The license has been validated.
            expired         : The expiration date of the license has passed."
    ::=    { ctcLicense 1 }


ctcLicenseKey OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "A Transaction Connection license key. The field must be
        exactly 32 hexadecimal characters in length."
    ::=    { ctcLicense 2 }


ctcLicenseMaxConn OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The maximum number of connections allowed by the license.
        This field contains zero if the license is for an unlimited number
        of connections or if the ctcLicenseState is not licenseOK."
    ::=    { ctcLicense 3 }


ctcLicenseCurrConn OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Current number of connections in use. Normally, the value
        of this field should be less then or equal to the value in
        ctcLicenseMaxConn if it is not zero. However, when a license key is
        changed to decrease the maximum number of connections, the value of
        this field may temporarily exceed the limit.  When this occurs,
        existing connections will not be deleted automatically to meet the
        new, smaller limit.  New connections will be denied until the
        existing connections voluntarily disconnect."
    ::=    { ctcLicense 4 }


ctcLicenseExpiration OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The expiration date of the Transaction Connection license.
        This object contains a valid expiration date only if the license is
        not permanent." 
    ::=    { ctcLicense 5 }



--
-- Destination Information
--

ctcDestinationTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CtcDestinationEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A table containing Cisco Transaction Connection destination
        configurations."
    ::=    { ciscoTransConnMIBObjects 2 }


ctcDestinationEntry OBJECT-TYPE
    SYNTAX      CtcDestinationEntry
    MAX-ACCESS  not-accessible
    STATUS      current 
    DESCRIPTION "A row containing a Cisco Transaction Connection destination
        configuration."
    INDEX        { ctcDestinationName }
    ::=        { ctcDestinationTable 1 }


CtcDestinationEntry ::=
    SEQUENCE {
        ctcDestinationName            SnmpAdminString,
        ctcDestinationRemoteLUName    SnmpAdminString,
        ctcDestinationModeName        SnmpAdminString,
        ctcDestinationNumHits         Unsigned32
        }


ctcDestinationName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The destination name."
    ::=    { ctcDestinationEntry 1 }


ctcDestinationRemoteLUName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (0..17))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The Remote LU (Logical Unit) name of the destination target."
    ::=    { ctcDestinationEntry 2 }


ctcDestinationModeName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (0..10))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The mode name of the destination target. In SNA, a mode
        name is the name used by the initiator of a session to designate the
        characteristics desired for that session, such as traffic pacing
        values, message length limits, and the class of service within the
        transport network."
    ::=    { ctcDestinationEntry 3 }


ctcDestinationNumHits OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The number of hits the destination target has received. A
        hit is registered each time a route is looked up. This means that
        every time a connection is established, one destination target of
        the route has its hit count incremented."
    ::=    { ctcDestinationEntry 4 }





--
-- Route Information
--

ctcRouteTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CtcRouteEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A table containing Cisco Transaction Connection route
        configurations."
    ::=    { ciscoTransConnMIBObjects 3 }


ctcRouteEntry OBJECT-TYPE
    SYNTAX      CtcRouteEntry
    MAX-ACCESS  not-accessible
    STATUS      current 
    DESCRIPTION "A row containing a Cisco Transaction Connection destination
        configuration."
    INDEX        { ctcRouteIndex }
    ::=        { ctcRouteTable 1 }


CtcRouteEntry ::=
    SEQUENCE {
        ctcRouteIndex                 Unsigned32,
        ctcRouteOwningServer          Unsigned32,
        ctcRouteTransactionID         SnmpAdminString,
        ctcRouteDestinationName       SnmpAdminString
        }


ctcRouteIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The index of this route in the route list."
    ::=    { ctcRouteEntry 1 }


ctcRouteOwningServer OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The ctcServerIndex of the server that owns this route."
    ::=    { ctcRouteEntry 2 }


ctcRouteTransactionID OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The transaction ID that this route handles."
    ::=    { ctcRouteEntry 3 }


ctcRouteDestinationName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The name of this route's destination."
    ::=    { ctcRouteEntry 4 }





--
-- Server Table
--

ctcServerTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CtcServerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A table containing Transaction Connection servers."
    ::=    { ciscoTransConnMIBObjects 4 }


ctcServerEntry OBJECT-TYPE
    SYNTAX      CtcServerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A row containing a Transaction Connection server. This
        server routes APPC (Advanced Program-to-Program Communcations) data
        streams between TCP/IP clients and CICS hosts. Each server will have
        a unique IP address and port." 
    INDEX        { ctcServerIndex }
    ::=        { ctcServerTable 1 }


CtcServerEntry ::=
    SEQUENCE {
        ctcServerIndex              Unsigned32,
        ctcServerName               SnmpAdminString,
        ctcServerListening          TruthValue,
        ctcServerIPAddr             IpAddress,
        ctcServerPort               Unsigned32,
        ctcServerDestinationName    SnmpAdminString,
        ctcServerClientTimeout      Unsigned32,
        ctcServerHostTimeout        Unsigned32,
        ctcServerWindowSize         Unsigned32,
        ctcServerConnectionCount    Unsigned32,
        ctcServerProgNameUpperCase  TruthValue
        }


ctcServerIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The index of this server in the server list."
    ::=    { ctcServerEntry 1 }


ctcServerName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The name of the server."
    ::=    { ctcServerEntry 2 }


ctcServerListening OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "This object reflects whether or not the server is listening
        for connections.  A return value of 'true' means the server is
        actively listening."
    ::=    { ctcServerEntry 3 }


ctcServerIPAddr OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "This object reflects the IP address for which the server is
        listening for connections. If it is set to 0.0.0.0, then the server
        is listening on all IP addresses."
    DEFVAL      { 0 }
    ::=    { ctcServerEntry 4 }


ctcServerPort OBJECT-TYPE
    SYNTAX      Unsigned32 (1..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The port on which the server is listening for connections."
    DEFVAL      { 1435 }
    ::=    { ctcServerEntry 5 }


ctcServerDestinationName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "This object reflects the name of this server's default
        destination."
    ::=     { ctcServerEntry 6 }


ctcServerClientTimeout OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1440)
    UNITS       "minutes"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "This object reflects the period of time that a client end
        connection can remain idle before being dropped by a server. The
        maximum time is 24 hours. If set to 0, the server will  never drop
        the connection due to a timeout event."
    DEFVAL      { 0 }
    ::=    { ctcServerEntry 7 }


ctcServerHostTimeout OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1440)
    UNITS       "minutes"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "This object reflects the period of time that a host end
        connection can remain idle before being dropped by a server. The
        maximum time is 24 hours. If set to 0, the server will never drop
        the connection due to a timeout event."
    DEFVAL      { 0 }
    ::=    { ctcServerEntry 8 }


ctcServerWindowSize OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "bytes"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "TCP window size for each connection of the Transaction
        Connection server."    
    DEFVAL      { 4096 }
    ::=    { ctcServerEntry 9 }

ctcServerConnectionCount OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The number of connections on this server at this moment."
    ::=     { ctcServerEntry 10 }


ctcServerProgNameUpperCase OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "This object reflects whether or not the server will convert
        CICS program names to upper case. A return value of 'true' means
        the server will convert such names to upper case."
    DEFVAL      { true }
    ::=    { ctcServerEntry 11 }




--
-- Connection Table
--                 

ctcConnectionTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CtcConnectionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A table containing connection information. Each row
        reflects a client connection that is active at this moment."
    ::=    { ciscoTransConnMIBObjects 5 }


ctcConnectionEntry OBJECT-TYPE
    SYNTAX      CtcConnectionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A row containing connection information."
    INDEX       { ctcConnectionIndex }
    ::=        { ctcConnectionTable 1 }


CtcConnectionEntry ::=
    SEQUENCE {
        ctcConnectionIndex              Unsigned32,
        ctcConnectionId                 OCTET STRING,
        ctcConnectionServer             Unsigned32,
        ctcConnectionState              INTEGER,
        ctcConnectionSessionCount       Unsigned32,
        ctcConnectionClientIPAddr       IpAddress,
        ctcConnectionClientPort         Unsigned32,
        ctcConnectionTotalConversations Unsigned32,
        ctcConnectionConnectTime        DateAndTime,
        ctcConnectionIdleTime           TimeInterval,
        ctcConnectionTotalBytesRecvd    Unsigned32
        }


ctcConnectionIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The index of this connection in the connection list."
    ::=    { ctcConnectionEntry 1 }


ctcConnectionId OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(4))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The ID of the connection object."
    ::=    { ctcConnectionEntry 2 }


ctcConnectionServer OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The ctcServerIndex of the server that owns this connection."
    ::=    { ctcConnectionEntry 3 }


ctcConnectionState OBJECT-TYPE
    SYNTAX      INTEGER {
                        reset(1),
                        closing(2),
                        halt(3),
                        receiving(4)
                        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The state of a connection object.
            reset     :  the connection is ready to process data
            closing   :  the connection is in the process of closing
            halt      :  the connection has halted due to an error condition
            receiving :  the connection is receive normal data"
    ::=    { ctcConnectionEntry 4 }


ctcConnectionSessionCount OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The number of sessions currently in use for the connection."
    ::=    { ctcConnectionEntry 5 }


ctcConnectionClientIPAddr OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "IP address of client machine using this connection."
    ::=    { ctcConnectionEntry 6 }


ctcConnectionClientPort OBJECT-TYPE
    SYNTAX      Unsigned32 (1..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Port number used on client machine for this connection."
    ::=    { ctcConnectionEntry 7 }


ctcConnectionTotalConversations OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The number of conversations that have been processed by the
        connection."
    ::=    { ctcConnectionEntry 8 }


ctcConnectionConnectTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The moment when the connection was established."
    ::=    { ctcConnectionEntry 9 }


ctcConnectionIdleTime OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Amount of time the connection has gone without activity."
    ::=    { ctcConnectionEntry 10 }


ctcConnectionTotalBytesRecvd OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The total number of bytes received from client."
    ::=    { ctcConnectionEntry 11 }


--
-- Transaction Table
--                 

ctcTransactionTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CtcTransactionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A table containing transaction information. Each row
        reflects a host transaction that is active at this moment."
    ::=    { ciscoTransConnMIBObjects 6 }


ctcTransactionEntry OBJECT-TYPE
    SYNTAX      CtcTransactionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A row containing transaction information."
    INDEX       { ctcTransactionIndex }
    ::=        { ctcTransactionTable 1 }


CtcTransactionEntry ::=
    SEQUENCE {
        ctcTransactionIndex             Unsigned32,
        ctcTransactionSessionId         OCTET STRING,
        ctcTransactionServer            Unsigned32,
        ctcTransactionConnectionId      OCTET STRING,
        ctcTransactionState             INTEGER,
        ctcTransactionTPName            SnmpAdminString,
        ctcTransactionUserId            SnmpAdminString
        }


ctcTransactionIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The index of this transaction in the transaction list."
    ::=    { ctcTransactionEntry 1 }


ctcTransactionSessionId OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(4))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The ID of the transaction session object."
    ::=    { ctcTransactionEntry 2 }


ctcTransactionServer OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The ctcServerIndex of the server that owns this
        transaction."
    ::=    { ctcTransactionEntry 3 }


ctcTransactionConnectionId OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(4))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The ID of the transaction session object's connection."
    ::=    { ctcTransactionEntry 4 }


ctcTransactionState OBJECT-TYPE
    SYNTAX      INTEGER {
                        reset(1),
                        opening(2),
                        sending(3),
                        receiving(4),
                        exception(5),
                        exceptionresponse(6),
                        closing(7)
                        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The state of a connection object.
            reset             : the transaction is ready to process data
            opening           : the transaction is opening a connection
            sending           : the transaction is sending data
            receiving         : the transaction is receiving data
            exception         : the transaction has encountered an error
            exceptionresponse : the transaction is awaiting an error response
            closing           : the transaction is in the process of closing"
    ::=    { ctcTransactionEntry 5 }


ctcTransactionTPName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The transaction program name of the transaction. This is
        sometimes referred to as the TRANID in CICS."
    ::=    { ctcTransactionEntry 6 }


ctcTransactionUserId OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The user ID that was used to initiate the transaction."
    ::=    { ctcTransactionEntry 7 }


--
-- conformance information
--
ciscoTransConnMIBConformance    OBJECT IDENTIFIER ::= { ciscoTransactionConnectionMIB 3 }
ciscoTransConnMIBCompliances    OBJECT IDENTIFIER ::= { ciscoTransConnMIBConformance 1 }
ciscoTransConnMIBGroups         OBJECT IDENTIFIER ::= { ciscoTransConnMIBConformance 2 }

--
-- compliance statement
--
ciscoTransConnMIBCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION "The compliance statement for entities which implement the
        Cisco Transaction Connection MIB"
    MODULE -- this module
        MANDATORY-GROUPS { 
            ciscoTransConnLicenseGroup,
            ciscoTransConnDestinationGroup,
            ciscoTransConnRouteGroup,
            ciscoTransConnServerGroup,
            ciscoTransConnConnectionGroup,
            ciscoTransConnTransactionGroup
        }
    ::= { ciscoTransConnMIBCompliances 1 }

--
-- units of conformance
--    

ciscoTransConnLicenseGroup OBJECT-GROUP
    OBJECTS {
        ctcLicenseState,
        ctcLicenseKey,
        ctcLicenseMaxConn,
        ctcLicenseCurrConn,
        ctcLicenseExpiration
    }
    STATUS      current
    DESCRIPTION "A collection of objects providing Transaction Connection
        license monitoring."
    ::= { ciscoTransConnMIBGroups 1 }


ciscoTransConnDestinationGroup OBJECT-GROUP
    OBJECTS {
        ctcDestinationName,
        ctcDestinationRemoteLUName,
        ctcDestinationModeName,
        ctcDestinationNumHits
    }
    STATUS      current
    DESCRIPTION "A collection of objects providing Transaction Connection
        destination monitoring."
    ::= { ciscoTransConnMIBGroups 2 }


ciscoTransConnRouteGroup OBJECT-GROUP
    OBJECTS {
        ctcRouteIndex,
        ctcRouteOwningServer,
        ctcRouteTransactionID,
        ctcRouteDestinationName
    }
    STATUS      current
    DESCRIPTION "A collection of objects providing Transaction Connection
        route monitoring."
    ::= { ciscoTransConnMIBGroups 3 }


ciscoTransConnServerGroup OBJECT-GROUP
    OBJECTS {
        ctcServerIndex,
        ctcServerName,
        ctcServerListening,
        ctcServerIPAddr,
        ctcServerPort,
        ctcServerDestinationName,
        ctcServerClientTimeout,
        ctcServerHostTimeout,
        ctcServerWindowSize,
        ctcServerConnectionCount,
        ctcServerProgNameUpperCase
    }
    STATUS      current
    DESCRIPTION "A collection of objects providing Transaction Connection
        server monitoring."
    ::= { ciscoTransConnMIBGroups 4 }


ciscoTransConnConnectionGroup OBJECT-GROUP
    OBJECTS {
        ctcConnectionIndex,
        ctcConnectionId,
        ctcConnectionServer,
        ctcConnectionState,
        ctcConnectionSessionCount,
        ctcConnectionClientIPAddr,
        ctcConnectionClientPort,
        ctcConnectionTotalConversations,
        ctcConnectionConnectTime,
        ctcConnectionIdleTime,
        ctcConnectionTotalBytesRecvd
    }
    STATUS      current
    DESCRIPTION "A collection of objects providing Transaction Connection
        monitoring."
    ::= { ciscoTransConnMIBGroups 5 }


ciscoTransConnTransactionGroup OBJECT-GROUP
    OBJECTS {
        ctcTransactionIndex,
        ctcTransactionSessionId,
        ctcTransactionServer,
        ctcTransactionConnectionId,
        ctcTransactionState,
        ctcTransactionTPName,
        ctcTransactionUserId
    }
    STATUS      current
    DESCRIPTION "A collection of objects providing Transaction Connection
        transaction monitoring."
    ::= { ciscoTransConnMIBGroups 6 }



END