| cvAtmCallHistoryConnectionId |
.1.3.6.1.4.1.9.10.35.1.1.1.1.1 |
|
The global call identifier for the ATM call.
|
| cvAtmCallHistoryVpi |
.1.3.6.1.4.1.9.10.35.1.1.1.1.2 |
|
The VPI used for this ATM connection.
|
| cvAtmCallHistoryVci |
.1.3.6.1.4.1.9.10.35.1.1.1.1.3 |
|
The VCI used for this ATM connection.
|
| cvAtmCallHistoryLowerIfName |
.1.3.6.1.4.1.9.10.35.1.1.1.1.4 |
|
The ifName of the ATM interface associated with this
call.
|
| cvAtmCallHistorySessionTarget |
.1.3.6.1.4.1.9.10.35.1.1.1.1.5 |
|
The object specifies the session target of the peer that
was used for the voice over ATM call. A zero length string
indicates that the value is unavailable.
|
| cvAtmCallHistorySubchannelID |
.1.3.6.1.4.1.9.10.35.1.1.1.1.6 |
|
The subchannel used for this ATM connection.
|
| cvAtmCallHistorySessionProtocol |
.1.3.6.1.4.1.9.10.35.1.1.1.1.7 |
|
Specifies the session protocol used on this call.
|
| cvAtmCallHistoryCalledNumber |
.1.3.6.1.4.1.9.10.35.1.1.1.1.8 |
|
Specifes the number called for trunk connection calls. A
zero length string indicates that this data is unavailable.
|
| cvAtmCallHistoryDtmfRelay |
.1.3.6.1.4.1.9.10.35.1.1.1.1.9 |
|
Specifies if Dtmf Relay was enabled for the call.
|
| cvAtmCallHistoryUseSeqNumbers |
.1.3.6.1.4.1.9.10.35.1.1.1.1.10 |
|
Specifies if Sequence Numbers were used on the voice data
packets.
|
| cvAtmCallActiveConnectionId |
.1.3.6.1.4.1.9.10.35.1.2.1.1.1 |
|
The global call identifier for the ATM call.
|
| cvAtmCallActiveVpi |
.1.3.6.1.4.1.9.10.35.1.2.1.1.2 |
|
The VPI used for this ATM connection.
|
| cvAtmCallActiveVci |
.1.3.6.1.4.1.9.10.35.1.2.1.1.3 |
|
The VCI used for this ATM connection.
|
| cvAtmCallActiveLowerIfName |
.1.3.6.1.4.1.9.10.35.1.2.1.1.4 |
|
The ifName of the ATM interface associated with this
call.
|
| cvAtmCallActiveSessionTarget |
.1.3.6.1.4.1.9.10.35.1.2.1.1.5 |
|
The object specifies the session target of the peer that
is used for the voice over ATM call. A null string indicates
that the value is unavailable.
|
| cvAtmCallActiveSubchannelID |
.1.3.6.1.4.1.9.10.35.1.2.1.1.6 |
|
The subchannel used for this ATM connection.
|
| cvAtmCallActiveSessionProtocol |
.1.3.6.1.4.1.9.10.35.1.2.1.1.7 |
|
Specifies the session protocol being used on this call.
|
| cvAtmCallActiveCalledNumber |
.1.3.6.1.4.1.9.10.35.1.2.1.1.8 |
|
Specifes the number called for trunk connection calls. A
null string indicates that this data is unavailable.
|
| cvAtmCallActiveDtmfRelay |
.1.3.6.1.4.1.9.10.35.1.2.1.1.9 |
|
Specifies if Dtmf Relay is enabled for the call.
|
| cvAtmCallActiveUseSeqNumbers |
.1.3.6.1.4.1.9.10.35.1.2.1.1.10 |
|
Specifies if Sequence Numbers are used on the voice data
packets.
|
| cvAtmPeerCfgSessionProtocol |
.1.3.6.1.4.1.9.10.35.1.3.1.1.1 |
|
The object specifies the session protocol to be used
for Internet call between local and remote router via
ATM backbone.
|
| cvAtmPeerCfgInterfaceName |
.1.3.6.1.4.1.9.10.35.1.3.1.1.2 |
|
The object specifies the ifName on which the call will go
out.
A zero length string indicates that no interface has been
assigned.
|
| cvAtmPeerCfgVpi |
.1.3.6.1.4.1.9.10.35.1.3.1.1.3 |
|
The VPI used for this ATM connection.
|
| cvAtmPeerCfgVci |
.1.3.6.1.4.1.9.10.35.1.3.1.1.4 |
|
The VCI used for this ATM connection.
|
| cvAtmPeerCfgVcName |
.1.3.6.1.4.1.9.10.35.1.3.1.1.5 |
|
The VC Name used for this ATM connection.
|
| cvAtmPeerCfgCoderRate |
.1.3.6.1.4.1.9.10.35.1.3.1.1.6 |
|
This object specifies the default voice coder rate of speech for
the ATM peer.
|
| cvAtmPeerCfgCodecBytes |
.1.3.6.1.4.1.9.10.35.1.3.1.1.7 |
|
This object specifies the payload size for the voice packets
to be transmitted during the call.
|
| cvAtmPeerCfgFaxRate |
.1.3.6.1.4.1.9.10.35.1.3.1.1.8 |
|
This object specifies the default transmit rate of FAX for the
ATM peer. If the value of this object is 'none', then
the Fax relay feature is disabled; otherwise the Fax relay
feature is enabled.
|
| cvAtmPeerCfgFaxBytes |
.1.3.6.1.4.1.9.10.35.1.3.1.1.9 |
|
This object specifies the payload size for the fax packets
to be transmitted during the call.
|
| cvAtmPeerCfgInBandSignaling |
.1.3.6.1.4.1.9.10.35.1.3.1.1.10 |
|
This object specifies the type of in-band signaling used
between the two end points of the call and is used by the
router to determine how to interpret the ABCD signaling bits
sent as part of the voice payload data.
|
| cvAtmPeerCfgVADEnable |
.1.3.6.1.4.1.9.10.35.1.3.1.1.11 |
|
This object specifies whether or not VAD (Voice Activity
Detection) is enabled. If the object value is 'false', then
the voice data is continuously transmitted to ATM backbone.
|
| cvAtmPeerCfgUseSeqNumbers |
.1.3.6.1.4.1.9.10.35.1.3.1.1.12 |
|
This object specifies whether or not Sequence Numbers are
generated on voice packets.
|
| cvAtmPeerCfgDtmfRelay |
.1.3.6.1.4.1.9.10.35.1.3.1.1.13 |
|
This object specifies whether or not Dtmf Relay is enabled.
If it is then dtmf digits are transported as FRF11 Annex
C packets, instead of being encoded as speech.
|
