CISCO-VOICE-TONE-CADENCE-MIB device MIB details by Cisco

CISCO-VOICE-TONE-CADENCE-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-VOICE-TONE-CADENCE-MIB.

Vendor:	Cisco
Mib:	CISCO-VOICE-TONE-CADENCE-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- CISCO-VOICE-TONE-CADENCE-MIB: Programmable Tones of media gateway.
--
-- May, 2003  Margaret Hsieh 
--
-- Copyright (c) 2003 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-VOICE-TONE-CADENCE-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY,
        OBJECT-TYPE,
        Unsigned32, Gauge32
                FROM SNMPv2-SMI
        RowStatus, StorageType, TEXTUAL-CONVENTION
                FROM SNMPv2-TC
        SnmpAdminString
                FROM SNMP-FRAMEWORK-MIB
        MODULE-COMPLIANCE,
        OBJECT-GROUP
                FROM SNMPv2-CONF
        cmgwIndex, CVoiceTonePlanIndex
                FROM CISCO-MEDIA-GATEWAY-MIB
        CountryCode
                FROM CISCO-TC
        ciscoMgmt
                FROM CISCO-SMI;

ciscoVoiceToneCadenceMIB MODULE-IDENTITY
        LAST-UPDATED    "200305280000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service
                Postal: 170 W. Tasman Drive
                        San Jose, CA  95134
                        USA
                Tel: +1 800 553-NETS
                E-mail: cs-voice-gateway@cisco.com"
        DESCRIPTION
                "The MIB defines the attributes of the programmable
                 tones specified in ITU-T E.180 Supplement 2. 

                 Each country has its own regulation to the generation
                 and detection of the call progressing
                 tones such as dial tone, busy tone, ring back tone.
                 The tone attributes are programmable, for example
                 frequency, amplitude, cadence and duration of the
                 tone."
        REVISION    "200305280000Z"
        DESCRIPTION
                "Initial version of the MIB."
        ::= { ciscoMgmt 356 }

ciscoVoiceToneCadenceMIBNotifs    
    OBJECT IDENTIFIER ::= { ciscoVoiceToneCadenceMIB 0 }
ciscoVoiceToneCadenceMIBObjects
    OBJECT IDENTIFIER ::= { ciscoVoiceToneCadenceMIB 1 }

cVoiceToneCadenceConfig
    OBJECT IDENTIFIER ::= { ciscoVoiceToneCadenceMIBObjects 1 }

-- *********************************************************************
-- TEXTUAL CONVENTIONS 
-- *********************************************************************

CToneFrequency ::= TEXTUAL-CONVENTION
    STATUS     current
    DESCRIPTION
        "This Textual Convention defines frequency of the
         programmable tone to be played or detected.

         The format of frequency of the programmable tone is
         based on ITU E.180 Supplement 2. The frequency octet string
         is a combination of Frequency Expression, frequency 
         conjuncture and frequency delimiter.

         Frequency Expression - The frequency expression is a single
               numeric value or a string of numeric values with the 
               notation '+' or '/'. The numeric values are the
               frequency's decimal values in Hz.

         '+' - frequency conjuncture. The Frequency Expression to the
               left and to the right of this notation are emitted
               simultaneously.

         '/' - frequency delimiter. The Frequency Expression to the
               left of this notation is emitted before the Frequency
               Expression to the right.

         For example, the Payphone Recognition Tone of Australia is
         '1100+1750/750+1450', which means frequency 1100Hz and 1750Hz
         are emitted simultaneously, stopped for a period of time,
         followed by the simultaneously emission of 750Hz and 1450Hz.
        "
    REFERENCE
        "ITU E.180 Supplement 2 - Various Tones Used In National
         Network."
    SYNTAX  OCTET STRING (SIZE(1..64))

CToneAmplitude ::= TEXTUAL-CONVENTION
    STATUS     current
    DESCRIPTION
        "This Textual Convention defines amplitude expression of the
         programmable tone to be played or detected.

         This textual convention is a combination of Amplitude 
         Expression, Amplitude conjuncture and Amplitude delimiter.

         Amplitude Expression - The amplitude expression is a single
               numeric value or a string of numeric values with the 
               notation '+' or '/'. The numeric values are the
               amplitude's decimal values in dBm. The numeric values
               are usually negative.

         '+' - Amplitude conjuncture. The Amplitude Expression to the
               left and to the right of this notation are emitted 
               simultaneously.
               The Amplitude Expression preceded this notation
               is the amplitude expression of the Frequency Expression 
               preceded '+'.
               The Amplitude Expression followed this notation
               is the amplitude expression of the Frequency Expression
               followed '+'.

         '/' - Amplitude delimiter. The Amplitude Expression to the
               left of this notation is emitted before the Amplitude
               Expression to the right.
               The Amplitude Expression preceded this notation
               is the amplitude expression of the Frequency Expression 
               preceded '/'.
               The Amplitude Expression followed this notation
               is the amplitude expression of the Frequency Expression 
               followed '/'.

         For example, the amplitude of USA Recall Dial Tone is
         '-10+-10' and the frequency is '350+440'. 
         It means amplitude of the both frequencies 350Hz and 440Hz
         are emitted simultaneously, each with amplitude expression
         -10 dBm."
    REFERENCE
        "ITU E.180/Q.35 - Technical Characteristic of Tones for the 
         Telephone Service." 
    SYNTAX  OCTET STRING (SIZE(2..64))

CToneCadence ::= TEXTUAL-CONVENTION
    STATUS     current
    DESCRIPTION
        "This Textual Convention defines cadence of the programmable
         tone to be played or detected.

         The format of cadence of the programmable tone is
         based on ITU E.180 Supplement 2.

         Cadence string consists of cadence units, digits, keywords 
         and special characters. Cadence Units are digits where each
         unit is one second.
         No space is allowed in the cadence string. 
         The keywords are 'on', 'off', 'CYCLES' and 'CONTINUOUS'.
         The special characters are '-', '*', '(', ')' and ','.

         'on' -  The number preceded this keyword is the duration of
                 emission in second.
         'off' - The number preceded this keyword is the duration of
                 absence in second.
         'CONTINUOUS' - The frequencies are sent out and stayed on
                 indefinitely.
         An on-off Period is either the keyword 'CONTINUOUS' or a
         Cadence Unit followed by the keyword 'ON' or 'OFF'.

         '-' - Separator. It separates multiple on-off Periods.

         A Cadence List is a sequence of  on-off Periods separated by
         the special character '-'. 

         'CYCLES' - When preceded by special character ',' and a
                 number X, the Cadence List before the special
                 character ',' is repeated X times. 

         Cadence List - The parentheses are delimiters. It is used
                 for the repetition. The entire Cadence List in the
                 parentheses is to be repeated. Without the delimiter,
                 only the first On-off Period is repeated.

         '*' - Repetition. When preceded by a number X, the On-off
               Period or the parenthesized Cadence List is to be
               repeated X times.

         ',' - Terminator.  It terminates a Cadence List and announces
               the presence of the keyword, 'CYCLES'. When followed by
               a number X and then the keyword 'CYCLES', the preceded
               Cadence List is repeated X times

         For example, in United States, the cadence of confirmation
         tone is '3*100on-2*100off', the cadence of dial tone is
         '3*(100on-100off)-CONTINUOUS'.
         In United Kingdom, the cadence of payphone tone is
         '200on-200off-200on-200off'.
         Any thing other then the above notation is not supported.
        "
    REFERENCE
        "ITU E.180 Supplement 2 - Various Tones Used In National
         Network."
    SYNTAX  OCTET STRING (SIZE(3..64))


--**********************************************************************
-- Tone Plan Table
--**********************************************************************
cvtcTonePlanTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF CvtcTonePlanEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
         "This table contains the configuration of tone plans 
          for the programmable tones in different countries."
     REFERENCE
         "ITU E.180 Supplement 2 - Various Tones Used In National
          Network." 
     ::= { cVoiceToneCadenceConfig 1 }

cvtcTonePlanEntry OBJECT-TYPE
     SYNTAX      CvtcTonePlanEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
         "An entry represents one tone plan which defines attributes
          of the programmable tones for a country.
          Each country can have more than one tone plans with 
          different version.  Each entry should have the unique
          combination of cvtcTonePlanCountry and cvtcTonePlanVersion.

          There are some system built-in tone plans. The built-in 
          tone plans will be populated by the system automatically 
          at the system start-up. They can not be created, deleted or 
          modified by user.

          When an entry is created, the following objects must be
          provided:
                   cvtcTonePlanCountry, 
                   cvtcTonePlanVersion, 
                   cvtcTonePlanFileName 

          When an entry is active, it can not be modified.
          A system built-in tone plan can not be deleted. Only the
          entries added by user can be deleted."
     INDEX      { cmgwIndex, cvtcTonePlanId }
     ::= { cvtcTonePlanTable 1 }

CvtcTonePlanEntry ::= SEQUENCE 
     {
         cvtcTonePlanId          CVoiceTonePlanIndex,
         cvtcTonePlanVifCount    Gauge32,
         cvtcTonePlanCountry     CountryCode,
         cvtcTonePlanVersion     Unsigned32,
         cvtcTonePlanFileName    SnmpAdminString,
         cvtcTonePlanStorageType StorageType, 
         cvtcTonePlanRowStatus   RowStatus
     }

cvtcTonePlanId    OBJECT-TYPE
    SYNTAX        CVoiceTonePlanIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This object uniquely identifies the tone plan in the table."
    ::= { cvtcTonePlanEntry 1 }

cvtcTonePlanVifCount    OBJECT-TYPE
    SYNTAX        Gauge32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object indicates the number of voice interfaces are 
         using the tone plan."  
    ::= { cvtcTonePlanEntry 2 }

cvtcTonePlanCountry OBJECT-TYPE
    SYNTAX        CountryCode
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "This object specifies the country code (defined in ISO-3166)
         of the country that the tone plan is used for.

         The country specified by the country code should be registered
         in ITU E.180 Supplement 2. 

         Any other entry in this table may have the identical 
         country code, but the combination of cvtcTonePlanCountry and 
         cvtcTonePlanVersion must be unique."
    REFERENCE
        "ITU E.180 Supplement 2.
         ISO-3166 Country Code. "
    ::= { cvtcTonePlanEntry 3 }

cvtcTonePlanVersion OBJECT-TYPE
    SYNTAX        Unsigned32 (0..100)
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "This object specifies the version of the tone plan for
         a country. One country may have many tone plans,
         therefore they may have the same country name, but the 
         combination of cvtcTonePlanCountry and cvtcTonePlanVersion 
         must be unique."
    ::= { cvtcTonePlanEntry 4 }

cvtcTonePlanFileName OBJECT-TYPE
    SYNTAX        SnmpAdminString (SIZE (1..64))
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "This object specifies the valid file name stored on
         the media gateway's harddisk.
         The tone plan file can be transferred to the media gateway
         via FTP text file transfer mechanism.
         When creating a conceptual row, the tone plan file must
         be transferred to the media gateway already.

         If the entry is a built-in tone plan predefined in system,
         then this object will have the value of 'BUILT-IN'.
         Other provision-able tone plan files are not allowed to have
         the string 'BUILT-IN' as their names."
    ::= { cvtcTonePlanEntry 5 }

cvtcTonePlanStorageType OBJECT-TYPE
    SYNTAX        StorageType 
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object specifies the storage type for this conceptual
         row. If this conceptual row represents a system built-in
         tone plan, the value of this object is readOnly (5).
         If this conceptual row represents an user defined tone 
         plan, the value of this object is nonVolatile (3). 

         The built-in tone plans will be added by the system
         automatically at the system start-up. They can not be
         added, deleted or modified by user."
    ::= { cvtcTonePlanEntry 6 }

cvtcTonePlanRowStatus OBJECT-TYPE
    SYNTAX        RowStatus
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "The entries for The system built-in tone plans will be
         added by the system at start-up, they can not be added,
         modified or deleted by user."
    ::= { cvtcTonePlanEntry 7 }

--*********************************************************************
-- Tone ID Table
--*********************************************************************
cvtcToneIdTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF CvtcToneIdEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
         "This table contains the identification of the 
          programmable tones."
     ::= { cVoiceToneCadenceConfig 2 }

cvtcToneIdEntry OBJECT-TYPE
     SYNTAX      CvtcToneIdEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
         "An entry represents the identification for  
          one programmable tone in a tone plan." 
     INDEX      { cmgwIndex, cvtcToneId }
     ::= { cvtcToneIdTable 1 }

CvtcToneIdEntry ::= SEQUENCE 
     {
     cvtcToneId            Unsigned32,
     cvtcToneName          SnmpAdminString,
     cvtcToneIdRowStatus   RowStatus
     }

cvtcToneId OBJECT-TYPE
    SYNTAX        Unsigned32 (1..65535)
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This object uniquely identifies the programmable tone in
         a tone plan." 
    ::= { cvtcToneIdEntry 1 }

cvtcToneName OBJECT-TYPE
    SYNTAX        SnmpAdminString (SIZE (1..64)) 
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "This object specified the name of the programmable tone." 
    ::= { cvtcToneIdEntry 2 }

cvtcToneIdRowStatus OBJECT-TYPE
    SYNTAX        RowStatus
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "The entries for ITU defined tones will be added by the 
         system at start-up."
    ::= { cvtcToneIdEntry 3 }

--*********************************************************************
-- Programmable Tone Table
--*********************************************************************
cvtcProgrammableToneTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF CvtcProgrammableToneEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
         "This table contains the configurable attributes 
          of the programmable tones for tone plan."
     ::= { cVoiceToneCadenceConfig 3 }

cvtcProgrammableToneEntry OBJECT-TYPE
     SYNTAX      CvtcProgrammableToneEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
         "An entry represents the configurable attributes for 
          one programmable tone in a tone plan.
          The tone attributes are specified in ITU E.180
          Supplement 2." 
     REFERENCE
         "ITU E.180 Supplement 2 - Various Tones Used In National
          Network." 
     INDEX      { cmgwIndex, cvtcTonePlanId, cvtcToneId }
     ::= { cvtcProgrammableToneTable 1 }

CvtcProgrammableToneEntry ::= SEQUENCE 
     {
     cvtcProgrammableToneFrequency   CToneFrequency,
     cvtcProgrammableToneAmplitude   CToneAmplitude,
     cvtcProgrammableToneCadence     CToneCadence,
     cvtcProgrammableToneDuration    Unsigned32,
     cvtcProgrammableToneStorageType StorageType,
     cvtcProgrammableToneRowStatus   RowStatus
     }

cvtcProgrammableToneFrequency OBJECT-TYPE
    SYNTAX        CToneFrequency 
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "This object specified the frequency of the tone 
         to be played or detected."
    REFERENCE
        "ITU E.180 Supplement 2 - Various Tones Used In National
          Network." 
    ::= { cvtcProgrammableToneEntry 1 }

cvtcProgrammableToneAmplitude OBJECT-TYPE
    SYNTAX        CToneAmplitude 
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "This object specified the amplitude expression of the tone 
         to be played or detected."
    REFERENCE
        "ITU E.180/Q.35 - Technical Characteristic of Tones for the 
         Telephone Service." 
    ::= { cvtcProgrammableToneEntry 2 }

cvtcProgrammableToneCadence OBJECT-TYPE
    SYNTAX        CToneCadence
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "This object specified the cadence of the tone 
         to be played or detected."
    REFERENCE
        "ITU E.180 Supplement 2 - Various Tones Used In National
          Network." 
    ::= { cvtcProgrammableToneEntry 3 }

cvtcProgrammableToneDuration OBJECT-TYPE
    SYNTAX        Unsigned32 (0..4294967295)
    UNITS         "milliseconds"
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "This object specified the duration of the tone 
         will be played.
         The value of 0 indicates that the tone will be played
         infinitely unless interrupted." 
    REFERENCE
        "ITU E.180/Q.35 - Technical Characteristic of Tones for the 
         Telephone Service." 
    ::= { cvtcProgrammableToneEntry 4 }

cvtcProgrammableToneStorageType OBJECT-TYPE
    SYNTAX        StorageType 
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "This object specifies the storage type for this 
         conceptual row. If this conceptual row represents 
         a programmable tone in a system built-in tone plan,
         the value of this object is permanent (4). 
         If this conceptual row represents a programmable tone
         in an user defined tone plan, the value of this object
         is nonVolatile (3). 

         If the value of this object is permanent (4), 
         cvtcProgrammableToneDuration is the only object can be
         modified by the user."
    ::= { cvtcProgrammableToneEntry 5 }

cvtcProgrammableToneRowStatus OBJECT-TYPE
    SYNTAX        RowStatus
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
       "This object is used to add, delete or modify the entry
        of the table.
        When an entry is created, the following objects have to
        be provided:
            cvtcProgrammableToneFrequency,
            cvtcProgrammableToneAmplitude,
            cvtcProgrammableToneCadence.
       "
    ::= { cvtcProgrammableToneEntry 6 }

--***********************************************************************
-- Conformance and compliance statements
--***********************************************************************

ciscoVoiceToneCadenceMIBConform 
    OBJECT IDENTIFIER ::= { ciscoVoiceToneCadenceMIB 3 }

cVoiceToneCadenceCompliances    
    OBJECT IDENTIFIER ::= { ciscoVoiceToneCadenceMIBConform 1 }
cVoiceToneCadenceGroups         
    OBJECT IDENTIFIER ::= { ciscoVoiceToneCadenceMIBConform 2 }

-- compliance statements

cVoiceToneCadenceCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "The compliance statement for entities which implement
         the CISCO-VOICE-TONE-CADENCE-MIB"
    MODULE  -- compliance to this module
    MANDATORY-GROUPS {
        cvtcToneConfigGroup
    }
    ::= { cVoiceToneCadenceCompliances 1 }

-- units of conformance

cvtcToneConfigGroup OBJECT-GROUP
    OBJECTS {
         cvtcTonePlanVifCount,
         cvtcTonePlanCountry,
         cvtcTonePlanVersion,
         cvtcTonePlanFileName,
         cvtcTonePlanStorageType,
         cvtcTonePlanRowStatus,
         cvtcToneName,
         cvtcToneIdRowStatus,
         cvtcProgrammableToneFrequency,
         cvtcProgrammableToneAmplitude,
         cvtcProgrammableToneCadence,   
         cvtcProgrammableToneDuration,   
         cvtcProgrammableToneStorageType,
         cvtcProgrammableToneRowStatus   
    }
    STATUS  current
    DESCRIPTION
        "The collection of objects providing programmable tones
         and tone plans. "
    ::= { cVoiceToneCadenceGroups 1 }

END