CISCO-VTP-CAPABILITY device MIB details by Cisco
CISCO-VTP-CAPABILITY file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-VTP-CAPABILITY.
Vendor: | Cisco |
---|---|
Mib: | CISCO-VTP-CAPABILITY [download] [view objects] |
Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- CISCO-VTP-CAPABILITY.my: -- Cisco CISCO-VTP-MIB AGENT-CAPABILITIES -- -- August 2003, Wen Xu -- -- Copyright (c) 2003, 2004 by Cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** CISCO-VTP-CAPABILITY DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI AGENT-CAPABILITIES FROM SNMPv2-CONF ciscoAgentCapability FROM CISCO-SMI; ciscoVtpCapability MODULE-IDENTITY LAST-UPDATED "200404150000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-lan-switch-snmp@cisco.com" DESCRIPTION "The capabilities description of CISCO-VTP-MIB." REVISION "200404150000Z" DESCRIPTION "Added capability statement ciscoVtpCapV12R0217SXACat6K. Added a VARIATION statement for the object vlanTrunkPortDynamicStatus in capability statement ciscoVtpCapV12R0119ECat6K and ciscoVtpCapV12R0217SXCat6K." REVISION "200312010000Z" DESCRIPTION "Added capability statement ciscoVtpCapCatOSV08R0301." REVISION "200309150000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoAgentCapability 329 } ciscoVtpCapV12R0119ECat6K AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco IOS 12.1(19E) on Catalyst 6000/6500 and Cisco 7600 series devices." STATUS current DESCRIPTION "CISCO-VTP-MIB capabilities." SUPPORTS CISCO-VTP-MIB INCLUDES { vtpBasicGroup, vtpVlanInfoGroup, vtpConfigNotificationsGroupRev1, vtpStatsGroup, vtpTrunkPortGroup, vtpVersion2BasicGroup, vtpVlanInfoEditGroup, vtpTrunkPortGroup2, vtpTrunkPortGroup3, vtpDot1qTunnelGroup, vtpTrunkPruningGroup, vtpTrunkPruningGroup2, vtpVlanIfIndexGroup, vtpVlanInfoEditGroup2, vtp4kVlanGroupRev1, vtpConfigNotificationsGroup2, vtpVlanNotifEnabledGroup, vtpConfigNotificationsGroup3 } VARIATION vtpVersion SYNTAX INTEGER { one(1), two(2) } DESCRIPTION "Only limited set of enumerated values are supported." VARIATION managementDomainRowStatus SYNTAX INTEGER { active(1) } DESCRIPTION "Only limited set of enumerated values are supported." VARIATION vlanTrunkPortRowStatus SYNTAX INTEGER { active(1) } DESCRIPTION "Only limited set of enumerated values are supported." VARIATION managementDomainVersionInUse SYNTAX INTEGER { version1(1), version2(2) } DESCRIPTION "Only limited set of enumerated values are supported." VARIATION vlanTrunkPortDynamicStatus SYNTAX INTEGER { trunking(1) } DESCRIPTION "Only limited set of enumerated values are supported. vlanTrunkPortTable only includes the trunking ports." ::= { ciscoVtpCapability 1 } ciscoVtpCapV12R0217SXCat6K AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco IOS 12.2(17)SX on Catalyst 6000/6500 and Cisco 7600 series devices." STATUS current DESCRIPTION "CISCO-VTP-MIB capabilities." SUPPORTS CISCO-VTP-MIB INCLUDES { vtpBasicGroup, vtpVlanInfoGroup, vtpConfigNotificationsGroupRev1, vtpStatsGroup, vtpTrunkPortGroup, vtpVersion2BasicGroup, vtpVlanInfoEditGroup, vtpTrunkPortGroup2, vtpTrunkPortGroup3, vtpDot1qTunnelGroup, vtpTrunkPruningGroup, vtpTrunkPruningGroup2, vtpVlanIfIndexGroup, vtpVlanInfoEditGroup2, vtp4kVlanGroupRev1, vtpConfigNotificationsGroup2, vtpVlanNotifEnabledGroup, vtpConfigNotificationsGroup3 } VARIATION vtpVersion SYNTAX INTEGER { one(1), two(2) } DESCRIPTION "Only limited set of enumerated values are supported." VARIATION managementDomainRowStatus SYNTAX INTEGER { active(1) } DESCRIPTION "Only limited set of enumerated values are supported." VARIATION vlanTrunkPortRowStatus SYNTAX INTEGER { active(1) } DESCRIPTION "Only limited set of enumerated values are supported." VARIATION managementDomainVersionInUse SYNTAX INTEGER { version1(1), version2(2) } DESCRIPTION "Only limited set of enumerated values are supported." VARIATION vlanTrunkPortDynamicStatus SYNTAX INTEGER { trunking(1) } DESCRIPTION "Only limited set of enumerated values are supported. vlanTrunkPortTable only includes the trunking ports." ::= { ciscoVtpCapability 2 } ciscoVtpCapCatOSV08R0101 AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco CatOS 8.1(1)." STATUS current DESCRIPTION "CISCO-VTP-MIB capabilities." SUPPORTS CISCO-VTP-MIB INCLUDES { vtpBasicGroup, vtpVlanInfoGroup, vtpConfigNotificationsGroupRev1, vtpStatsGroup, vtpTrunkPortGroup, vtpVersion2BasicGroup, vtpVlanInfoEditGroup, vtpDot1qTunnelGroup, vtpTrunkPortGroup2, vtpTrunkPortGroup3, vtpTrunkPruningGroup, vtpTrunkPruningGroup2, vtpVlanIfIndexGroup, vtpVlanInfoEditGroup2, vtp4kVlanGroup, vtp4kVlanGroupRev1, vtpConfigNotificationsGroup2, vtpVlanNotifEnabledGroup, vtpConfigNotificationsGroup3, vtpDiscoverGroup, vtpDatabaseGroup, vtpAuthGroup } VARIATION vtpVersion SYNTAX INTEGER { one(1), two(2), three(4) } DESCRIPTION "Only limited set of enumerated values are supported." VARIATION managementDomainRowStatus SYNTAX INTEGER { active(1)} DESCRIPTION "Only limited set of enumerated values are supported." VARIATION vlanTrunkPortRowStatus SYNTAX INTEGER { active(1)} DESCRIPTION "Only limited set of enumerated values are supported." VARIATION managementDomainVersionInUse SYNTAX INTEGER { version1(1), version2(2), version3(4) } DESCRIPTION "Only limited set of enumerated values are supported." ::= { ciscoVtpCapability 3 } ciscoVtpCapCatOSV08R0301 AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco CatOS 8.3(1)." STATUS current DESCRIPTION "CISCO-VTP-MIB capabilities." SUPPORTS CISCO-VTP-MIB INCLUDES { vtpBasicGroup, vtpVlanInfoGroup, vtpConfigNotificationsGroupRev1, vtpStatsGroup, vtpTrunkPortGroup, vtpVersion2BasicGroup, vtpVlanInfoEditGroup, vtpDot1qTunnelGroup, vtpTrunkPortGroup2, vtpTrunkPortGroup3, vtpTrunkPruningGroup, vtpTrunkPruningGroup2, vtpVlanIfIndexGroup, vtpVlanInfoEditGroup2, vtp4kVlanGroup, vtp4kVlanGroupRev1, vtpConfigNotificationsGroup2, vtpVlanNotifEnabledGroup, vtpConfigNotificationsGroup3, vtpDiscoverGroup, vtpDatabaseGroup, vtpAuthGroup, vtpInternalVlanGrp } VARIATION vtpVersion SYNTAX INTEGER { one(1), two(2), three(4) } DESCRIPTION "Only limited set of enumerated values are supported." VARIATION managementDomainRowStatus SYNTAX INTEGER { active(1)} DESCRIPTION "Only limited set of enumerated values are supported." VARIATION vlanTrunkPortRowStatus SYNTAX INTEGER { active(1)} DESCRIPTION "Only limited set of enumerated values are supported." VARIATION managementDomainVersionInUse SYNTAX INTEGER { version1(1), version2(2), version3(4) } DESCRIPTION "Only limited set of enumerated values are supported." ::= { ciscoVtpCapability 4 } ciscoVtpCapV12R0217SXACat6K AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco IOS 12.2(17)SXA on Catalyst 6000/6500 and Cisco 7600 series devices." STATUS current DESCRIPTION "CISCO-VTP-MIB capabilities." SUPPORTS CISCO-VTP-MIB INCLUDES { vtpBasicGroup, vtpVlanInfoGroup, vtpConfigNotificationsGroupRev1, vtpStatsGroup, vtpTrunkPortGroup, vtpVersion2BasicGroup, vtpVlanInfoEditGroup, vtpTrunkPortGroup2, vtpTrunkPortGroup3, vtpDot1qTunnelGroup, vtpTrunkPruningGroup, vtpTrunkPruningGroup2, vtpVlanIfIndexGroup, vtpVlanInfoEditGroup2, vtp4kVlanGroupRev1, vtpConfigNotificationsGroup2, vtpVlanNotifEnabledGroup, vtpConfigNotificationsGroup3 } VARIATION vtpVersion SYNTAX INTEGER { one(1), two(2) } DESCRIPTION "Only limited set of enumerated values are supported." VARIATION managementDomainRowStatus SYNTAX INTEGER { active(1) } DESCRIPTION "Only limited set of enumerated values are supported." VARIATION vlanTrunkPortRowStatus SYNTAX INTEGER { active(1) } DESCRIPTION "Only limited set of enumerated values are supported." VARIATION managementDomainVersionInUse SYNTAX INTEGER { version1(1), version2(2) } DESCRIPTION "Only limited set of enumerated values are supported." ::= { ciscoVtpCapability 5 } END