DIFFSERV-MIB-CAPABILITY device MIB details by Cisco
DIFFSERV-MIB-CAPABILITY file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing DIFFSERV-MIB-CAPABILITY.
Vendor: | Cisco |
---|---|
Mib: | DIFFSERV-MIB-CAPABILITY [download] [view objects] |
Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- DIFFSERV-MIB-CAPABILITY.my: -- DIFFSERV MIB AGENT-CAPABILITIES -- -- October 2003, H.K.Vivek -- -- Copyright (c) 2003 by cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** DIFFSERV-MIB-CAPABILITY DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI AGENT-CAPABILITIES FROM SNMPv2-CONF ciscoAgentCapability FROM CISCO-SMI IndexInteger, IfDirection FROM DIFFSERV-MIB; diffServMibCapability MODULE-IDENTITY LAST-UPDATED "200310130000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-san@cisco.com" DESCRIPTION "Agent capabilities for DIFFSERV-MIB" REVISION "200310130000Z" DESCRIPTION "The capabilities description of DIFFSERV-MIB (RFC 3289) for MDS 1.3(1)." ::= { ciscoAgentCapability 377 } diffServMibCapabilityMDS13R1 AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco MDS 1.3(1)" STATUS current DESCRIPTION "DIFFSERV MIB capabilities" SUPPORTS DIFFSERV-MIB INCLUDES { diffServMIBDataPathGroup, diffServMIBClfrGroup, diffServMIBClfrElementGroup, diffServMIBMeterGroup, diffServMIBActionGroup, diffServMIBDscpMarkActGroup } VARIATION diffServDataPathIfDirection SYNTAX IfDirection DESCRIPTION "Only 'inbound(1)' is supported." VARIATION diffServDataPathStart ACCESS read-only DESCRIPTION "create is not supported." VARIATION diffServDataPathStorage ACCESS read-only DESCRIPTION "create is not supported." VARIATION diffServDataPathStatus ACCESS read-only DESCRIPTION "create is not supported." VARIATION diffServClfrNextFree ACCESS not-implemented DESCRIPTION "Not supported." VARIATION diffServClfrId SYNTAX IndexInteger (1..1023) DESCRIPTION "Only the range 1-1023 is supported." VARIATION diffServClfrStorage ACCESS read-only DESCRIPTION "create is not supported." VARIATION diffServClfrElementNextFree ACCESS not-implemented DESCRIPTION "Not supported." VARIATION diffServClfrElementId SYNTAX IndexInteger (1..256) DESCRIPTION "Only the range 1-256 is supported." VARIATION diffServClfrElementPrecedence ACCESS read-only DESCRIPTION "create is not supported." VARIATION diffServClfrElementStorage ACCESS read-only DESCRIPTION "create is not supported." VARIATION diffServClfrElementEntry CREATION-REQUIRES { diffServClfrElementSpecific } DESCRIPTION "The diffServClfrElementSpecific object must be specified during creation and this object cannot be modified later." VARIATION diffServClfrElementNext DESCRIPTION "This object can only be set to diffServActionEntry." VARIATION diffServClfrElementSpecific DESCRIPTION "This object can only be set to cdsmFCMultiFieldClfrEntry, which is defined in CISCO-DIFFSERV-EXT-MIB." VARIATION diffServMeterNextFree ACCESS not-implemented DESCRIPTION "Not supported." VARIATION diffServMeterSucceedNext ACCESS read-only DESCRIPTION "create is not supported." VARIATION diffServMeterFailNext ACCESS read-only DESCRIPTION "create is not supported." VARIATION diffServMeterSpecific ACCESS read-only DESCRIPTION "create is not supported." VARIATION diffServMeterStorage ACCESS read-only DESCRIPTION "create is not supported." VARIATION diffServMeterStatus ACCESS read-only DESCRIPTION "create is not supported." VARIATION diffServActionNextFree ACCESS not-implemented DESCRIPTION "Not supported." VARIATION diffServActionNext ACCESS read-only DESCRIPTION "create is not supported." VARIATION diffServActionSpecific ACCESS read-only DESCRIPTION "create is not supported." VARIATION diffServActionStorage ACCESS read-only DESCRIPTION "create is not supported." VARIATION diffServActionInterface ACCESS read-only DESCRIPTION "create is not supported." VARIATION diffServActionStatus ACCESS read-only DESCRIPTION "create is not supported." ::= { diffServMibCapability 1 } END