OLD-CISCO-INTERFACES-MIB device MIB details by Cisco
OLD-CISCO-INTERFACES-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing OLD-CISCO-INTERFACES-MIB.
| Vendor: | Cisco |
|---|---|
| Mib: | OLD-CISCO-INTERFACES-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- OLD-CISCO-INTERFACES-MIB.my: Cisco Interfaces MIB file -- -- May 1994, Jeffrey T. Johnson -- -- Copyright (c) 1994,1997 by cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** -- OLD-CISCO-INTERFACES-MIB DEFINITIONS ::= BEGIN IMPORTS Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString, ifIndex FROM RFC1213-MIB local FROM CISCO-SMI; linterfaces OBJECT IDENTIFIER ::= { local 2 } -- Local Interface Group -- This group is present in all products. -- Local Interface Table -- This group provides additional objects to the table -- defined by RFC1156. lifTable OBJECT-TYPE SYNTAX SEQUENCE OF LifEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of interface entries." ::= { linterfaces 1 } lifEntry OBJECT-TYPE SYNTAX LifEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of additional objects in the cisco interface." INDEX { ifIndex } ::= { lifTable 1 } LifEntry ::= SEQUENCE { locIfHardType DisplayString, locIfLineProt INTEGER, locIfLastIn INTEGER, locIfLastOut INTEGER, locIfLastOutHang INTEGER, locIfInBitsSec INTEGER, locIfInPktsSec INTEGER, locIfOutBitsSec INTEGER, locIfOutPktsSec INTEGER, locIfInRunts INTEGER, locIfInGiants INTEGER, locIfInCRC INTEGER, locIfInFrame INTEGER, locIfInOverrun INTEGER, locIfInIgnored INTEGER, locIfInAbort INTEGER, locIfResets INTEGER, locIfRestarts INTEGER, locIfKeep INTEGER, locIfReason DisplayString, locIfCarTrans INTEGER, locIfReliab INTEGER, locIfDelay INTEGER, locIfLoad INTEGER, locIfCollisions INTEGER, locIfInputQueueDrops INTEGER, locIfOutputQueueDrops INTEGER, locIfDescr DisplayString, locIfSlowInPkts Counter, locIfSlowOutPkts Counter, locIfSlowInOctets Counter, locIfSlowOutOctets Counter, locIfFastInPkts Counter, locIfFastOutPkts Counter, locIfFastInOctets Counter, locIfFastOutOctets Counter, locIfotherInPkts Counter, locIfotherOutPkts Counter, locIfotherInOctets Counter, locIfotherOutOctets Counter, locIfipInPkts Counter, locIfipOutPkts Counter, locIfipInOctets Counter, locIfipOutOctets Counter, locIfdecnetInPkts Counter, locIfdecnetOutPkts Counter, locIfdecnetInOctets Counter, locIfdecnetOutOctets Counter, locIfxnsInPkts Counter, locIfxnsOutPkts Counter, locIfxnsInOctets Counter, locIfxnsOutOctets Counter, locIfclnsInPkts Counter, locIfclnsOutPkts Counter, locIfclnsInOctets Counter, locIfclnsOutOctets Counter, locIfappletalkInPkts Counter, locIfappletalkOutPkts Counter, locIfappletalkInOctets Counter, locIfappletalkOutOctets Counter, locIfnovellInPkts Counter, locIfnovellOutPkts Counter, locIfnovellInOctets Counter, locIfnovellOutOctets Counter, locIfapolloInPkts Counter, locIfapolloOutPkts Counter, locIfapolloInOctets Counter, locIfapolloOutOctets Counter, locIfvinesInPkts Counter, locIfvinesOutPkts Counter, locIfvinesInOctets Counter, locIfvinesOutOctets Counter, locIfbridgedInPkts Counter, locIfbridgedOutPkts Counter, locIfbridgedInOctets Counter, locIfbridgedOutOctets Counter, locIfsrbInPkts Counter, locIfsrbOutPkts Counter, locIfsrbInOctets Counter, locIfsrbOutOctets Counter, locIfchaosInPkts Counter, locIfchaosOutPkts Counter, locIfchaosInOctets Counter, locIfchaosOutOctets Counter, locIfpupInPkts Counter, locIfpupOutPkts Counter, locIfpupInOctets Counter, locIfpupOutOctets Counter, locIfmopInPkts Counter, locIfmopOutPkts Counter, locIfmopInOctets Counter, locIfmopOutOctets Counter, locIflanmanInPkts Counter, locIflanmanOutPkts Counter, locIflanmanInOctets Counter, locIflanmanOutOctets Counter, locIfstunInPkts Counter, locIfstunOutPkts Counter, locIfstunInOctets Counter, locIfstunOutOctets Counter, locIfspanInPkts Counter, locIfspanOutPkts Counter, locIfspanInOctets Counter, locIfspanOutOctets Counter, locIfarpInPkts Counter, locIfarpOutPkts Counter, locIfarpInOctets Counter, locIfarpOutOctets Counter, locIfprobeInPkts Counter, locIfprobeOutPkts Counter, locIfprobeInOctets Counter, locIfprobeOutOctets Counter, locIfDribbleInputs Counter } -- The following section describes the components of the -- table. locIfHardType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Returns the type of interface." ::= { lifEntry 1 } locIfLineProt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Boolean whether interface line protocol is up or not." ::= { lifEntry 2 } locIfLastIn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Elapsed time in milliseconds since last line protocol input packet was received." ::= { lifEntry 3 } locIfLastOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Elapsed time in milliseconds since last line protocol output packet was transmitted." ::= { lifEntry 4 } locIfLastOutHang OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Elapsed time in milliseconds since last line protocol output packet could not be successfully transmitted." ::= { lifEntry 5 } locIfInBitsSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Five minute exponentially-decayed moving average of input bits per second." ::= { lifEntry 6 } locIfInPktsSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Five minute exponentially-decayed moving average of input packets per second." ::= { lifEntry 7 } locIfOutBitsSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Five minute exponentially-decayed moving average of output bits per second." ::= { lifEntry 8 } locIfOutPktsSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Five minute exponentially-decayed moving average of output packets per second." ::= { lifEntry 9 } locIfInRunts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets input which were smaller then the allowable physical media permitted." ::= { lifEntry 10 } locIfInGiants OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of input packets which were larger then the physical media permitted." ::= { lifEntry 11 } locIfInCRC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of input packets which had cyclic redundancy checksum errors." ::= { lifEntry 12 } locIfInFrame OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of input packet which were misaligned." ::= { lifEntry 13 } locIfInOverrun OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Count of input which arrived too quickly for the to hardware receive." ::= { lifEntry 14 } locIfInIgnored OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of input packets which were simply ignored by this interface." ::= { lifEntry 15 } locIfInAbort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of input packets which were aborted." ::= { lifEntry 16 } locIfResets OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the interface internally reset." ::= { lifEntry 17 } locIfRestarts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of times interface needed to be completely restarted." ::= { lifEntry 18 } locIfKeep OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Boolean whether keepalives are enabled on this interface." ::= { lifEntry 19 } locIfReason OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Reason for interface last status change." ::= { lifEntry 20 } locIfCarTrans OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of times interface saw the carrier signal transition." ::= { lifEntry 21 } locIfReliab OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The reliability of the interface. Used by IGRP." ::= { lifEntry 22 } locIfDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of delay in microseconds of the interface. Used by IGRP." ::= { lifEntry 23 } locIfLoad OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The loading factor of the interface. Used by IGRP." ::= { lifEntry 24 } locIfCollisions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of output collisions detected on this interface." ::= { lifEntry 25 } locIfInputQueueDrops OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets dropped because the input queue was full." ::= { lifEntry 26 } locIfOutputQueueDrops OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets dropped because the output queue was full." ::= { lifEntry 27 } locIfDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "User configurable interface description." ::= { lifEntry 28 } locIfSlowInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Packet count for Inbound traffic routed with slow switching" ::= { lifEntry 30 } locIfSlowOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Packet count for Outbound traffic routed with slow switching" ::= { lifEntry 31 } locIfSlowInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Octet count for Inbound traffic routed with slow switching" ::= { lifEntry 32 } locIfSlowOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Octet count for Outbound traffic routed with slow switching" ::= { lifEntry 33 } locIfFastInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Packet count for Inbound traffic routed with fast switching" ::= { lifEntry 34 } locIfFastOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Packet count for Outbound traffic routed with fast switching" ::= { lifEntry 35 } locIfFastInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Octet count for Inbound traffic routed with fast switching" ::= { lifEntry 36 } locIfFastOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Octet count for Outbound traffic routed with fast switching" ::= { lifEntry 37 } locIfotherInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Other protocol input packet count" ::= { lifEntry 38 } locIfotherOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Other protocol output packet count" ::= { lifEntry 39 } locIfotherInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Other protocol input octet count" ::= { lifEntry 40 } locIfotherOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Other protocol output octet count" ::= { lifEntry 41 } locIfipInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "ip protocol input packet count" ::= { lifEntry 42 } locIfipOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "ip protocol output packet count" ::= { lifEntry 43 } locIfipInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "ip protocol input octet count" ::= { lifEntry 44 } locIfipOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "ip protocol output octet count" ::= { lifEntry 45 } locIfdecnetInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Decnet protocol input packet count" ::= { lifEntry 46 } locIfdecnetOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Decnet protocol output packet count" ::= { lifEntry 47 } locIfdecnetInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Decnet protocol input byte count" ::= { lifEntry 48 } locIfdecnetOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Decnet protocol output byte count" ::= { lifEntry 49 } locIfxnsInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "XNS protocol input packet count" ::= { lifEntry 50 } locIfxnsOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "XNS protocol output packet count" ::= { lifEntry 51 } locIfxnsInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "XNS protocol input byte count" ::= { lifEntry 52 } locIfxnsOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "XNS protocol output byte count" ::= { lifEntry 53 } locIfclnsInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "CLNS protocol input packet count" ::= { lifEntry 54 } locIfclnsOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "CLNS protocol output packet count" ::= { lifEntry 55 } locIfclnsInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "CLNS protocol input byte count" ::= { lifEntry 56 } locIfclnsOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "CLNS protocol output byte count" ::= { lifEntry 57 } locIfappletalkInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Appletalk protocol input packet count" ::= { lifEntry 58 } locIfappletalkOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Appletalk protocol output packet count" ::= { lifEntry 59 } locIfappletalkInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Appletalk protocol input octet count" ::= { lifEntry 60 } locIfappletalkOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Appletalk protocol output octet count" ::= { lifEntry 61 } locIfnovellInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Novell protocol input packet count" ::= { lifEntry 62 } locIfnovellOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Novell protocol output packet count" ::= { lifEntry 63 } locIfnovellInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Novell protocol input octet count" ::= { lifEntry 64 } locIfnovellOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Novell protocol output octet count" ::= { lifEntry 65 } locIfapolloInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Apollo protocol input packet count" ::= { lifEntry 66 } locIfapolloOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Apollo protocol output packet count" ::= { lifEntry 67 } locIfapolloInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Apollo protocol input octet count" ::= { lifEntry 68 } locIfapolloOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Apollo protocol output octet count" ::= { lifEntry 69 } locIfvinesInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Vines protocol input packet count" ::= { lifEntry 70 } locIfvinesOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Vines protocol output packet count" ::= { lifEntry 71 } locIfvinesInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Vines protocol input octet count" ::= { lifEntry 72 } locIfvinesOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Vines protocol output octet count" ::= { lifEntry 73 } locIfbridgedInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Bridged protocol input packet count" ::= { lifEntry 74 } locIfbridgedOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Bridged protocol output packet count" ::= { lifEntry 75 } locIfbridgedInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Bridged protocol input octet count" ::= { lifEntry 76 } locIfbridgedOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Bridged protocol output octet count" ::= { lifEntry 77 } locIfsrbInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "SRB protocol input packet count" ::= { lifEntry 78 } locIfsrbOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "SRB protocol output packet count" ::= { lifEntry 79 } locIfsrbInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "SRB protocol input octet count" ::= { lifEntry 80 } locIfsrbOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "SRB protocol output octet count" ::= { lifEntry 81 } locIfchaosInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Choas protocol input packet count" ::= { lifEntry 82 } locIfchaosOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Choas protocol output packet count" ::= { lifEntry 83 } locIfchaosInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Choas protocol input octet count" ::= { lifEntry 84 } locIfchaosOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Choas protocol output octet count" ::= { lifEntry 85 } locIfpupInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "PUP protocol input packet count" ::= { lifEntry 86 } locIfpupOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "PUP protocol output packet count" ::= { lifEntry 87 } locIfpupInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "PUP protocol input octet count" ::= { lifEntry 88 } locIfpupOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "PUP protocol output octet count" ::= { lifEntry 89 } locIfmopInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "MOP protocol input packet count" ::= { lifEntry 90 } locIfmopOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "MOP protocol output packet count" ::= { lifEntry 91 } locIfmopInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "MOP protocol input octet count" ::= { lifEntry 92 } locIfmopOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "MOP protocol output octet count" ::= { lifEntry 93 } locIflanmanInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "LanMan protocol input packet count" ::= { lifEntry 94 } locIflanmanOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "LanMan protocol output packet count" ::= { lifEntry 95 } locIflanmanInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "LanMan protocol input octet count" ::= { lifEntry 96 } locIflanmanOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "LanMan protocol output octet count" ::= { lifEntry 97 } locIfstunInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "STUN protocol input packet count" ::= { lifEntry 98 } locIfstunOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "STUN protocol output packet count" ::= { lifEntry 99 } locIfstunInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "STUN protocol input octet count" ::= { lifEntry 100 } locIfstunOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "STUN protocol output octet count" ::= { lifEntry 101 } locIfspanInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Spanning tree input protocol packet count" ::= { lifEntry 102 } locIfspanOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Spanning tree output protocol packet count" ::= { lifEntry 103 } locIfspanInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Spanning tree input octet packet count" ::= { lifEntry 104 } locIfspanOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Spanning tree output octet packet count" ::= { lifEntry 105 } locIfarpInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Arp protocol input packet count" ::= { lifEntry 106 } locIfarpOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Arp protocol output packet count" ::= { lifEntry 107 } locIfarpInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Arp protocol input octet count" ::= { lifEntry 108 } locIfarpOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Arp protocol output octet count" ::= { lifEntry 109 } locIfprobeInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Probe protocol input packet count" ::= { lifEntry 110 } locIfprobeOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Probe protocol output packet count" ::= { lifEntry 111 } locIfprobeInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Probe protocol input octet count" ::= { lifEntry 112 } locIfprobeOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Probe protocol output octet count" ::= { lifEntry 113 } locIfDribbleInputs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of good packets received with the dribble condition present" ::= { lifEntry 114 } -- End of table -- Local FSIP card Table, also used for 4T, HSSI, Mx serial -- This group provides additional objects to the table -- defined by RFC1156. lFSIPTable OBJECT-TYPE SYNTAX SEQUENCE OF LFSIPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of card entries for 4T, HSSI, Mx serial or FSIP." ::= { linterfaces 2 } lFSIPEntry OBJECT-TYPE SYNTAX LFSIPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of objects specific to 4T, HSSI, Mx serial or FSIP." INDEX { locIfFSIPIndex } ::= { lFSIPTable 1 } LFSIPEntry ::= SEQUENCE { locIfFSIPIndex INTEGER, locIfFSIPtype INTEGER, locIfFSIPrts INTEGER, locIfFSIPcts INTEGER, locIfFSIPdtr INTEGER, locIfFSIPdcd INTEGER, locIfFSIPdsr INTEGER, locIfFSIPrxClockrate INTEGER, locIfFSIPrxClockrateHi INTEGER, locIfFSIPportType INTEGER } -- The following section describes the components of the -- table. locIfFSIPIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface index of this card corresponding to its ifIndex" ::= { lFSIPEntry 1 } locIfFSIPtype OBJECT-TYPE SYNTAX INTEGER { notAvailable(1), dte(2), dce(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Is this FSIP line DCE or DTE" ::= { lFSIPEntry 2 } locIfFSIPrts OBJECT-TYPE SYNTAX INTEGER { notAvailable(1), up(2), down(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Is the RTS signal up or down" ::= { lFSIPEntry 3 } locIfFSIPcts OBJECT-TYPE SYNTAX INTEGER { notAvailable(1), up(2), down(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Is the CTS signal up or down" ::= { lFSIPEntry 4 } locIfFSIPdtr OBJECT-TYPE SYNTAX INTEGER { notAvailable(1), up(2), down(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Is the DTR signal up or down" ::= { lFSIPEntry 5 } locIfFSIPdcd OBJECT-TYPE SYNTAX INTEGER { notAvailable(1), up(2), down(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Is the DCD signal up or down" ::= { lFSIPEntry 6 } locIfFSIPdsr OBJECT-TYPE SYNTAX INTEGER { notAvailable(1), up(2), down(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Is the DSR signal up or down" ::= { lFSIPEntry 7 } locIfFSIPrxClockrate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Received clock rate" ::= { lFSIPEntry 8 } locIfFSIPrxClockrateHi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Use when received clock rate is greater than 2^32 (gigabits)." ::= { lFSIPEntry 9 } -- PortType is modeled after rs232PortType -- in RS-232-MIB.my locIfFSIPportType OBJECT-TYPE SYNTAX INTEGER { noCable(1), rs232(2), rs422(3), rs423(4), v35(5), x21(6), rs449(7), rs530(8), hssi(9) } ACCESS read-only STATUS mandatory DESCRIPTION "Cable Type of 4T, HSSI, Mx serial or FSIP" ::= { lFSIPEntry 10 } -- End of table END