OLD-CISCO-IP-MIB device MIB details by Cisco
OLD-CISCO-IP-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing OLD-CISCO-IP-MIB.
| Vendor: | Cisco |
|---|---|
| Mib: | OLD-CISCO-IP-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- OLD-CISCO-IP-MIB.my: Old Local IP MIB file -- -- May 1994, Nick Thille -- -- Copyright (c) 1994 by cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** -- OLD-CISCO-IP-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress, Counter, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 ipAdEntAddr, ipRouteDest, DisplayString FROM RFC1213-MIB local FROM CISCO-SMI; lip OBJECT IDENTIFIER ::= { local 4 } -- Local IP Group -- This group is present in all products which are using the -- IP protocol. -- Local IP Address Table -- This group provides additional objects to the table -- defined by RFC 1213. lipAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF LipAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of IP address entries." ::= { lip 1 } lipAddrEntry OBJECT-TYPE SYNTAX LipAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of additional objects in the cisco IP implementation." INDEX { ipAdEntAddr } ::= { lipAddrTable 1 } LipAddrEntry ::= SEQUENCE { locIPHow DisplayString, locIPWho IpAddress, locIPHelper IpAddress, locIPSecurity INTEGER, locIPRedirects INTEGER, locIPUnreach INTEGER } -- The following section describes the components of the -- table. locIPHow OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Method of how this interface obtained its IP address." ::= { lipAddrEntry 1 } locIPWho OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP address of who supplied this interface its IP address." ::= { lipAddrEntry 2 } locIPHelper OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP helper address for broadcast forwarding support." ::= { lipAddrEntry 3 } locIPSecurity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IP security level. See RFC 1038." ::= { lipAddrEntry 4 } locIPRedirects OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Boolean whether ICMP redirects will be sent or not." ::= { lipAddrEntry 5 } locIPUnreach OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Boolean whether ICMP unreachables will be sent or not." ::= { lipAddrEntry 6 } -- End of table -- Local IP Routing Table -- This group provides additional objects to the table -- defined by RFC1156. lipRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF LipRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of IP routing entries." ::= { lip 2 } lipRouteEntry OBJECT-TYPE SYNTAX LipRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of additional objects in the cisco IP routing implementation." INDEX { ipRouteDest } ::= { lipRouteTable 1 } LipRouteEntry ::= SEQUENCE { locRtMask IpAddress, locRtCount INTEGER, locRtUses INTEGER } -- The following section describes the components of the -- table. locRtMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Routing table network mask." ::= { lipRouteEntry 1 } locRtCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of parallel routes within routing table." ::= { lipRouteEntry 2 } locRtUses OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of times this route was used in a forward operation." ::= { lipRouteEntry 3 } -- End of table actThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Threshold of IP accounting records in use before IP traffic will be unaccounted." ::= { lip 4 } actLostPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Lost IP packets due to memory limitations." ::= { lip 5 } actLostByts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total bytes of lost IP packets." ::= { lip 6 } -- Local IP Accounting Table -- This group provides access to the cisco IP accounting -- support. lipAccountingTable OBJECT-TYPE SYNTAX SEQUENCE OF LipAccountEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of IP accounting entries." ::= { lip 7 } lipAccountEntry OBJECT-TYPE SYNTAX LipAccountEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of objects necessary for IP accounting." INDEX { actSrc, actDst } ::= { lipAccountingTable 1 } LipAccountEntry ::= SEQUENCE { actSrc IpAddress, actDst IpAddress, actPkts INTEGER, actByts INTEGER, actViolation INTEGER } -- The following section describes the components of the -- table. actSrc OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Source address for host traffic matrix." ::= { lipAccountEntry 1 } actDst OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Destination address for host traffic matrix." ::= { lipAccountEntry 2 } actPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of IP packets sent from source to destination." ::= { lipAccountEntry 3 } actByts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of bytes in IP packets from source to destination." ::= { lipAccountEntry 4 } actViolation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Access list number violated by packets from this source to this destination. A zero value indicates that no access list was violated." ::= { lipAccountEntry 5 } -- End of table actAge OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The age of the data in the current data matrix." ::= { lip 8 } -- Local IP Checkpoint Accounting Table -- This group provides access to the cisco -- IP checkpoint accounting support. lipCkAccountingTable OBJECT-TYPE SYNTAX SEQUENCE OF LipCkAccountEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of IP checkpoint accounting entries." ::= { lip 9 } lipCkAccountEntry OBJECT-TYPE SYNTAX LipCkAccountEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of objects necessary for IP checkpoint accounting." INDEX { ckactSrc, ckactDst } ::= { lipCkAccountingTable 1 } LipCkAccountEntry ::= SEQUENCE { ckactSrc IpAddress, ckactDst IpAddress, ckactPkts INTEGER, ckactByts INTEGER, ckactViolation INTEGER } -- The following section describes the components of the -- table. ckactSrc OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Source address for host in checkpoint traffic matrix." ::= { lipCkAccountEntry 1 } ckactDst OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Destination address for host in checkpoint traffic matrix." ::= { lipCkAccountEntry 2 } ckactPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of IP packets sent from source to destination in checkpoint matrix." ::= { lipCkAccountEntry 3 } ckactByts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of bytes in IP packets from source to destination in checkpoint matrix. A zero value indicates that no access list was violated." ::= { lipCkAccountEntry 4 } ckactViolation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Access list number violated by packets from source to destination in checkpoint matrix." ::= { lipCkAccountEntry 5 } -- End of table ckactAge OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Age of data in the checkpoint matrix." ::= { lip 10 } actCheckPoint OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Check points the accounting database. This mib variable must be read and then set with the same value for the check point to succeed. The value read and then set will be incremented after a successful set request" ::= { lip 11 } ipNoaccess OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets dropped due to access control failure." ::= { lip 12 } END