OLD-CISCO-IP-MIB.mib object view, vendor Cisco

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2024 can import MIB file OLD-CISCO-IP-MIB and use it to monitor vendor specific OID's.

OLD-CISCO-IP-MIB file content

Object view of OLD-CISCO-IP-MIB:

Scalar Object
lipAddrEntry	.1.3.6.1.4.1.9.2.4.1.1
A collection of additional objects in the cisco IP implementation.
lipRouteEntry	.1.3.6.1.4.1.9.2.4.2.1
A collection of additional objects in the cisco IP routing implementation.
actThresh	.1.3.6.1.4.1.9.2.4.4
Threshold of IP accounting records in use before IP traffic will be unaccounted.
actLostPkts	.1.3.6.1.4.1.9.2.4.5
Lost IP packets due to memory limitations.
actLostByts	.1.3.6.1.4.1.9.2.4.6
Total bytes of lost IP packets.
lipAccountEntry	.1.3.6.1.4.1.9.2.4.7.1
A collection of objects necessary for IP accounting.
actAge	.1.3.6.1.4.1.9.2.4.8
The age of the data in the current data matrix.
lipCkAccountEntry	.1.3.6.1.4.1.9.2.4.9.1
A collection of objects necessary for IP checkpoint accounting.
ckactAge	.1.3.6.1.4.1.9.2.4.10
Age of data in the checkpoint matrix.
actCheckPoint	.1.3.6.1.4.1.9.2.4.11
Check points the accounting database. This mib variable must be read and then set with the same value for the check point to succeed. The value read and then set will be incremented after a successful set request
ipNoaccess	.1.3.6.1.4.1.9.2.4.12
Total number of packets dropped due to access control failure.
Tabular Object
locIPHow	.1.3.6.1.4.1.9.2.4.1.1.1
Method of how this interface obtained its IP address.
locIPWho	.1.3.6.1.4.1.9.2.4.1.1.2
IP address of who supplied this interface its IP address.
locIPHelper	.1.3.6.1.4.1.9.2.4.1.1.3
IP helper address for broadcast forwarding support.
locIPSecurity	.1.3.6.1.4.1.9.2.4.1.1.4
IP security level. See RFC 1038.
locIPRedirects	.1.3.6.1.4.1.9.2.4.1.1.5
Boolean whether ICMP redirects will be sent or not.
locIPUnreach	.1.3.6.1.4.1.9.2.4.1.1.6
Boolean whether ICMP unreachables will be sent or not.
locRtMask	.1.3.6.1.4.1.9.2.4.2.1.1
Routing table network mask.
locRtCount	.1.3.6.1.4.1.9.2.4.2.1.2
Number of parallel routes within routing table.
locRtUses	.1.3.6.1.4.1.9.2.4.2.1.3
Number of times this route was used in a forward operation.
actSrc	.1.3.6.1.4.1.9.2.4.7.1.1
IP Source address for host traffic matrix.
actDst	.1.3.6.1.4.1.9.2.4.7.1.2
IP Destination address for host traffic matrix.
actPkts	.1.3.6.1.4.1.9.2.4.7.1.3
Number of IP packets sent from source to destination.
actByts	.1.3.6.1.4.1.9.2.4.7.1.4
Total number of bytes in IP packets from source to destination.
actViolation	.1.3.6.1.4.1.9.2.4.7.1.5
Access list number violated by packets from this source to this destination. A zero value indicates that no access list was violated.
ckactSrc	.1.3.6.1.4.1.9.2.4.9.1.1
IP Source address for host in checkpoint traffic matrix.
ckactDst	.1.3.6.1.4.1.9.2.4.9.1.2
IP Destination address for host in checkpoint traffic matrix.
ckactPkts	.1.3.6.1.4.1.9.2.4.9.1.3
Number of IP packets sent from source to destination in checkpoint matrix.
ckactByts	.1.3.6.1.4.1.9.2.4.9.1.4
Total number of bytes in IP packets from source to destination in checkpoint matrix. A zero value indicates that no access list was violated.
ckactViolation	.1.3.6.1.4.1.9.2.4.9.1.5
Access list number violated by packets from source to destination in checkpoint matrix.
Table
lipAddrTable	.1.3.6.1.4.1.9.2.4.1
A list of IP address entries.
lipRouteTable	.1.3.6.1.4.1.9.2.4.2
A list of IP routing entries.
lipAccountingTable	.1.3.6.1.4.1.9.2.4.7
A list of IP accounting entries.
lipCkAccountingTable	.1.3.6.1.4.1.9.2.4.9
A list of IP checkpoint accounting entries.
Object Identifier
lip	.1.3.6.1.4.1.9.2.4