CPQSCSI-MIB device MIB details by Compaq
CPQSCSI-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CPQSCSI-MIB.
| Vendor: | Compaq |
|---|---|
| Mib: | CPQSCSI-MIB [download] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- **************************************************************************** -- -- Compaq SCSI Devices -- Management Information Base for SNMP Network Management -- -- -- Copyright 1992, 1993, Compaq Computer Corporation. -- All Rights Reserved. -- -- The information in this document is subject to change without notice. -- -- COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL -- OR EDITORIAL ERRORS OR OMISSIONS CONATINED HEREIN; NOR FOR INCIDENTAL -- OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, -- OR USE OF THIS MATERIAL. -- -- Refer to the READMIB.RDM file for more information about the -- organization of the information in the Compaq Enterprise. -- -- The Compaq Enterprise number is 232. -- The ASN.1 prefix to, and including the Compaq Enterprise is: -- 1.3.6.1.4.1.232 -- -- **************************************************************************** CPQSCSI-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI Counter FROM RFC1155-SMI Gauge FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; compaq OBJECT IDENTIFIER ::= { enterprises 232 } cpqScsi OBJECT IDENTIFIER ::= { compaq 5 } cpqScsiMibRev OBJECT IDENTIFIER ::= { cpqScsi 1 } cpqScsiComponent OBJECT IDENTIFIER ::= { cpqScsi 2 } cpqScsiTrap OBJECT IDENTIFIER ::= { cpqScsi 3 } cpqScsiInterface OBJECT IDENTIFIER ::= { cpqScsiComponent 1 } cpqScsiCntlr OBJECT IDENTIFIER ::= { cpqScsiComponent 2 } cpqScsiLogDrv OBJECT IDENTIFIER ::= { cpqScsiComponent 3 } cpqScsiPhyDrv OBJECT IDENTIFIER ::= { cpqScsiComponent 4 } cpqScsiTarget OBJECT IDENTIFIER ::= { cpqScsiComponent 5 } cpqScsiOsNetWare OBJECT IDENTIFIER ::= { cpqScsiInterface 1 } cpqScsiOsCommon OBJECT IDENTIFIER ::= { cpqScsiInterface 4 } -- The following groups have been deprecated cpqSbScsiBus OBJECT IDENTIFIER ::= { compaq 7 } cpqSbScsiMibRev OBJECT IDENTIFIER ::= { cpqSbScsiBus 1 } cpqSbDevice OBJECT IDENTIFIER ::= { cpqSbScsiBus 2 } -- **************************************************************************** -- SCSI MIB Revision -- ================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqScsi Group (1.3.6.1.4.1.232.5) -- cpqScsiMibRev Group (1.3.6.1.4.1.232.5.1) -- -- -- An Insight Agent conforming to this document will return a mibRevMajor -- of one and a mibRevMinor of three. -- -- -- Implementation of the MibRev group is mandatory for all agents -- supporting the Compaq SCSI MIB. -- -- **************************************************************************** cpqScsiMibRevMajor OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level." ::= { cpqScsiMibRev 1 } cpqScsiMibRevMinor OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Minor Revision level. A change in the minor revision level may represent some minor additional support; no changes to any pre-existing information has occurred." ::= { cpqScsiMibRev 2 } cpqScsiMibCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The overall condition. This object represents the overall status of the Compaq SCSI system represented by this MIB." ::= { cpqScsiMibRev 3 } -- **************************************************************************** -- SCSI NetWare Driver Information -- =============================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqScsi Group (1.3.6.1.4.1.232.5) -- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2) -- cpqScsiInterface Group (1.3.6.1.4.1.232.5.2.1) -- cpqScsiOsNetWare Group (1.3.6.1.4.1.232.5.2.1.1) -- -- Implementation of the osNetWare group is mandatory for all agents that -- support the Compaq SCSI MIB in a osNetWare 3x host operating -- environment. -- -- **************************************************************************** cpqScsiNw3xDriverName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Drive Device Driver Name. This is the name of the NetWare v3.1x SCSI device driver. It can be used for identification purposes." ::= { cpqScsiOsNetWare 1 } cpqScsiNw3xDriverVers OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Drive Device Driver Version. This is the version of the NetWare v3.1x SCSI device driver. It can be used for identification purposes." ::= { cpqScsiOsNetWare 2 } cpqScsiNw3xDriverPollType OBJECT-TYPE SYNTAX INTEGER { other(1), polled(2), demand(3) } ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Drive Device Driver Poll Type. The SNMP instrument agent collects information from the device driver in two ways: other(1) The management agent does not recognize this poll type. You may need to upgrade your software. polled(2) Indicates that the information is periodically requested and stored by the server based agent and is available when requested. demand(3) Indicates that the information is collected at the time of the request." ::= { cpqScsiOsNetWare 3 } cpqScsiNw3xDriverPollTime OBJECT-TYPE SYNTAX INTEGER (1..300) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Drive Device Driver Poll Time. If the nw3xDriverPollType is polled(2) this value shows how frequently, in seconds, the instrument agent requests information from the device driver. To change the poll time, you need to unload and then reload the instrument agent using the following commands: UNLOAD CPQDSKSA LOAD CPQDSKSA /U<time> The parameter /U specifies the frequency of updates in seconds. The variable <time> represents the number of seconds that the NLM should wait before collecting new data. The minimum is one second and the maximum value is 300 seconds (five minutes)." ::= { cpqScsiOsNetWare 4 } -- **************************************************************************** -- SCSI NetWare Controller Information -- =================================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqScsi Group (1.3.6.1.4.1.232.5) -- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2) -- cpqScsiInterface Group (1.3.6.1.4.1.232.5.2.1) -- cpqScsiOsNetWare Group (1.3.6.1.4.1.232.5.2.1.1) -- cpqScsiNw3xCntlrInfoTable (1.3.6.1.4.1.232.5.2.1.1.5) -- -- **************************************************************************** cpqScsiNw3xCntlrInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqScsiNw3xCntlrInfoEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Compaq SCSI Controller Information Table." ::= { cpqScsiOsNetWare 5 } cpqScsiNw3xCntlrInfoEntry OBJECT-TYPE SYNTAX CpqScsiNw3xCntlrInfoEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Compaq SCSI Controller Information Table Entry." INDEX { cpqScsiNw3xCntlrIndex, cpqScsiNw3xBusIndex } ::= { cpqScsiNw3xCntlrInfoTable 1 } CpqScsiNw3xCntlrInfoEntry ::= SEQUENCE { cpqScsiNw3xCntlrIndex INTEGER, cpqScsiNw3xBusIndex INTEGER, cpqScsiNw3xXptDesc DisplayString, cpqScsiNw3xXptVers DisplayString, cpqScsiNw3xSimDesc DisplayString, cpqScsiNw3xSimVers DisplayString, cpqScsiNw3xHbaDesc DisplayString } cpqScsiNw3xCntlrIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer system where the adapter is located." ::= { cpqScsiNw3xCntlrInfoEntry 1 } cpqScsiNw3xBusIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on an adapter." ::= { cpqScsiNw3xCntlrInfoEntry 2 } cpqScsiNw3xXptDesc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI XPT Description. This is a description of the Transport Layer (XPT) module, CPQSXPT.DSK. The Transport Layer manages requests from the device driver and routes them to the appropriate SCSI Interface Module (SIM). This architecture is based on the ANSI SCSI-2 Common Access Method (CAM) specification." ::= { cpqScsiNw3xCntlrInfoEntry 3 } cpqScsiNw3xXptVers OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI XPT Version. This is the version of the Transport Layer (XPT) module, CPQSXPT.DSK. The Transport Layer manages requests from the device driver and routes them to the appropriate SCSI Interface Module (SIM). This architecture is based on the ANSI SCSI-2 Common Access Method (CAM) specification." ::= { cpqScsiNw3xCntlrInfoEntry 4 } cpqScsiNw3xSimDesc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI SIM Description. This is a description of the SCSI Interface Module (SIM). Each type of controller model has a specific SIM designed for it. The SIM accepts requests from the Transport Layer and delivers them to the physical device. This architecture is based on the ANSI SCSI-2 Common Access Method (CAM) specification." ::= { cpqScsiNw3xCntlrInfoEntry 5 } cpqScsiNw3xSimVers OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI SIM Version. This is the version of the SCSI Interface Module (SIM). Each type of controller model has a specific SIM designed for it. The SIM accepts requests from the Transport Layer and delivers them to the physical device. This architecture is based on the ANSI SCSI-2 Common Access Method (CAM) specification." ::= { cpqScsiNw3xCntlrInfoEntry 6 } cpqScsiNw3xHbaDesc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI HBA Description. This is a description of the SCSI Host Bus Adapter (HBA). An HBA represents one instance of a SCSI bus in the SCSI Interface Module (SIM). This architecture is based on the ANSI SCSI-2 Common Access Method (CAM) specification." ::= { cpqScsiNw3xCntlrInfoEntry 7 } -- **************************************************************************** -- SCSI NetWare Logical Drive Statistics -- ===================================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqScsi Group (1.3.6.1.4.1.232.5) -- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2) -- cpqScsiInterface Group (1.3.6.1.4.1.232.5.2.1) -- cpqScsiOsNetWare Group (1.3.6.1.4.1.232.5.2.1.1) -- cpqScsiLogDrvStatTable (1.3.6.1.4.1.232.5.2.1.1.6) -- -- **************************************************************************** cpqScsiLogDrvStatTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqScsiLogDrvStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Statistics Table." ::= { cpqScsiOsNetWare 6 } cpqScsiLogDrvStatEntry OBJECT-TYPE SYNTAX CpqScsiLogDrvStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Compaq SCSI Device Driver Statistics Table Entry." INDEX { cpqScsiNw3xStatCntlrIndex, cpqScsiNw3xStatBusIndex, cpqScsiNw3xStatLogDrvIndex } ::= { cpqScsiLogDrvStatTable 1 } CpqScsiLogDrvStatEntry ::= SEQUENCE { cpqScsiNw3xStatCntlrIndex INTEGER, cpqScsiNw3xStatBusIndex INTEGER, cpqScsiNw3xStatLogDrvIndex INTEGER, cpqScsiNw3xTotalReads Counter, cpqScsiNw3xTotalWrites Counter, cpqScsiNw3xCorrReads Counter, cpqScsiNw3xCorrWrites Counter, cpqScsiNw3xFatalReads Counter, cpqScsiNw3xFatalWrites Counter } cpqScsiNw3xStatCntlrIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer system where the adapter is located." ::= { cpqScsiLogDrvStatEntry 1 } cpqScsiNw3xStatBusIndex OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on a card." ::= { cpqScsiLogDrvStatEntry 2 } cpqScsiNw3xStatLogDrvIndex OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Index. The logical drive index indicates to which logical drive instance on a SCSI bus this table entry belongs. The logical drive index starts at one and increments for each logical drive on the SCSI bus." ::= { cpqScsiLogDrvStatEntry 3 } cpqScsiNw3xTotalReads OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Total Reads. This shows the total number of reads performed by the device driver to this logical drive. This number is reset each time the device driver is loaded for this logical drive." ::= { cpqScsiLogDrvStatEntry 4 } cpqScsiNw3xTotalWrites OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Total Writes. This shows the total number of writes performed by the device driver to this logical drive. This number is reset each time the device driver is loaded for this logical drive." ::= { cpqScsiLogDrvStatEntry 5 } cpqScsiNw3xCorrReads OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Corrected Reads. This is the total number of read commands sent to the specified logical drive which had to be corrected by fault tolerance. This number is reset each time the device driver is loaded for this logical drive." ::= { cpqScsiLogDrvStatEntry 6 } cpqScsiNw3xCorrWrites OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Corrected Writes. This is the total number of write commands sent to the specified logical drive which had to be corrected by fault tolerance. This number is reset each time the device driver is loaded for this logical drive." ::= { cpqScsiLogDrvStatEntry 7 } cpqScsiNw3xFatalReads OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Fatal Reads. This is the total number of read commands sent to the specified logical drive which failed. This number is reset each time the device driver is loaded for this logical drive." ::= { cpqScsiLogDrvStatEntry 8 } cpqScsiNw3xFatalWrites OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Fatal Writes. This is the total number of write commands sent to the specified logical drive which failed. This number is reset each time the device driver is loaded for this logical drive." ::= { cpqScsiLogDrvStatEntry 9 } -- **************************************************************************** -- SCSI NetWare Volume Map Table -- ============================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqScsi Group (1.3.6.1.4.1.232.5) -- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2) -- cpqScsiInterface Group (1.3.6.1.4.1.232.5.2.1) -- cpqScsiOsNetWare Group (1.3.6.1.4.1.232.5.2.1.1) -- cpqScsiVolMapTable (1.3.6.1.4.1.232.5.2.1.1.7) -- -- **************************************************************************** cpqScsiVolMapTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqScsiVolMapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Compaq SCSI Drive Volume Map Table." ::= { cpqScsiOsNetWare 7 } cpqScsiVolMapEntry OBJECT-TYPE SYNTAX CpqScsiVolMapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Compaq SCSI Drive Volume Map Table Entry." INDEX { cpqScsiNw3xVolCntlrIndex, cpqScsiNw3xVolBusIndex, cpqScsiNw3xVolLogDrvIndex } ::= { cpqScsiVolMapTable 1 } CpqScsiVolMapEntry ::= SEQUENCE { cpqScsiNw3xVolCntlrIndex INTEGER, cpqScsiNw3xVolBusIndex INTEGER, cpqScsiNw3xVolLogDrvIndex INTEGER, cpqScsiNw3xVolMap OCTET STRING } cpqScsiNw3xVolCntlrIndex OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Cntlr Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer system where the adapter is located." ::= { cpqScsiVolMapEntry 1 } cpqScsiNw3xVolBusIndex OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on a card." ::= { cpqScsiVolMapEntry 2 } cpqScsiNw3xVolLogDrvIndex OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Index. The logical drive index indicates to which logical drive instance on a SCSI bus this table entry belongs. The logical drive index starts at one and increments for each logical drive on the SCSI bus." ::= { cpqScsiVolMapEntry 3 } cpqScsiNw3xVolMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Drive Volume Map. This is a data structure containing the volume mappings for this logical drive. There are 8 entries in a NetWare volume mapping. An entry can be null indicating no mapping exists. Each entry has the following format. BYTE Name[16] BYTE Segment" ::= { cpqScsiVolMapEntry 4 } -- **************************************************************************** -- SCSI OS Common -- ============== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqScsi Group (1.3.6.1.4.1.232.5) -- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2) -- cpqScsiInterface Group (1.3.6.1.4.1.232.5.2.1) -- cpqScsiOsCommon Group (1.3.6.1.4.1.232.5.2.1.4) -- -- -- The cpqScsiOsCommon group describes the SCSI common OS interface. -- This information describes the interface modules general OS interface -- architectural information. -- -- Implementation of the cpqScsiOsCommon group is mandatory for all -- agents that support the Compaq SCSI MIB. -- -- **************************************************************************** cpqScsiOsCommonPollFreq OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The Insight Agent's polling frequency. The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero indicates that the Insight Agent retrieves the information upon request of a management station, it does not poll the device driver at a specific interval. If the poll frequency is zero (0) all attempts to write to this object will fail. If the poll frequency is non-zero, setting this value will change the polling frequency of the Insight Agent. Setting the poll frequency to zero will always fail, an agent may also choose to fail any request to change the poll frequency to a value that would severely impact system performance." ::= { cpqScsiOsCommon 1 } -- **************************************************************************** -- SCSI OS Common Module -- ===================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqScsi Group (1.3.6.1.4.1.232.5) -- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2) -- cpqScsiInterface Group (1.3.6.1.4.1.232.5.2.1) -- cpqScsiOsCommon Group (1.3.6.1.4.1.232.5.2.1.4) -- cpqScsiOsCommonModuleTable (1.3.6.1.4.1.232.5.2.1.4.2) -- -- **************************************************************************** cpqScsiOsCommonModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqScsiOsCommonModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of software modules that provide an interface to the device this MIB describes." ::= { cpqScsiOsCommon 2 } cpqScsiOsCommonModuleEntry OBJECT-TYPE SYNTAX CpqScsiOsCommonModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A description of a software modules that provide an interface to the device this MIB describes." INDEX { cpqScsiOsCommonModuleIndex } ::= { cpqScsiOsCommonModuleTable 1 } CpqScsiOsCommonModuleEntry ::= SEQUENCE { cpqScsiOsCommonModuleIndex INTEGER, cpqScsiOsCommonModuleName DisplayString, cpqScsiOsCommonModuleVersion DisplayString, cpqScsiOsCommonModuleDate OCTET STRING, cpqScsiOsCommonModulePurpose DisplayString } cpqScsiOsCommonModuleIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "A unique index for this module description." ::= { cpqScsiOsCommonModuleEntry 1 } cpqScsiOsCommonModuleName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The module name." ::= { cpqScsiOsCommonModuleEntry 2 } cpqScsiOsCommonModuleVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be a null (size 0) string if the agent cannot provide the module version." ::= { cpqScsiOsCommonModuleEntry 3 } cpqScsiOsCommonModuleDate OBJECT-TYPE SYNTAX OCTET STRING (SIZE (7)) ACCESS read-only STATUS mandatory DESCRIPTION "The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the module date. The hour, minute, and second field will be set to zero (0) if they are not relevant. The year field is set with the most significant octect first." ::= { cpqScsiOsCommonModuleEntry 4 } cpqScsiOsCommonModulePurpose OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The purpose of the module described in this entry." ::= { cpqScsiOsCommonModuleEntry 5 } -- **************************************************************************** -- SCSI Controller Group -- ==================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqScsi Group (1.3.6.1.4.1.232.5) -- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2) -- cpqScsiCntlr Group (1.3.6.1.4.1.232.5.2.2) -- cpqScsiCntlrTable (1.3.6.1.4.1.232.5.2.2.1) -- -- -- The Cntlr group contains the configuration and statistical information -- of the SCSI controller. -- -- Implementation of the Cntlr group is mandatory for all agents that -- support the Compaq SCSI MIB. -- -- **************************************************************************** cpqScsiCntlrTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqScsiCntlrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Compaq SCSI Controller Table." ::= { cpqScsiCntlr 1 } cpqScsiCntlrEntry OBJECT-TYPE SYNTAX CpqScsiCntlrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Compaq SCSI Controller Table Entry." INDEX { cpqScsiCntlrIndex, cpqScsiCntlrBusIndex } ::= { cpqScsiCntlrTable 1 } CpqScsiCntlrEntry ::= SEQUENCE { cpqScsiCntlrIndex INTEGER, cpqScsiCntlrBusIndex INTEGER, cpqScsiCntlrModel INTEGER, cpqScsiCntlrFWVers DisplayString, cpqScsiCntlrSWVers DisplayString, cpqScsiCntlrSlot INTEGER, cpqScsiCntlrStatus INTEGER, cpqScsiCntlrHardResets Counter, cpqScsiCntlrSoftResets Counter, cpqScsiCntlrTimeouts Counter, cpqScsiCntlrBaseIOAddr INTEGER, cpqScsiCntlrCondition INTEGER } cpqScsiCntlrIndex OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer system where the adapter is located." ::= { cpqScsiCntlrEntry 1 } cpqScsiCntlrBusIndex OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on a card." ::= { cpqScsiCntlrEntry 2 } cpqScsiCntlrModel OBJECT-TYPE SYNTAX INTEGER { other(1), cpqs710(2), cpqs94(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Controller Model. The is the controller's model and can be used for identification purposes. The following values are defined: other(1) The management agent does not recognize this model. You may need to upgrade your software. cpqs710(2) Compaq 32-Bit Fast SCSI-2 Controller. cpqs94(3) Compaq Systempro/XL Integrated SCSI-2 Options Port." ::= { cpqScsiCntlrEntry 3 } cpqScsiCntlrFWVers OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Controller Firmware Version. This is the version of the firmware on the SCSI controller. If the SCSI controller does not use firmware then this string will be of length zero (0). Some SCSI bus controllers are script driven and use the computer system's microprocessor thus not needing firmware." ::= { cpqScsiCntlrEntry 4 } cpqScsiCntlrSWVers OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Controller Software Version. This is the version of any software upgrade which is being used in place of the firmware with the controller. If the SCSI controller has not been upgraded via software or does not have firmware then this string will be of length zero (0). Some SCSI bus controllers are script driven and use the computer system's microprocessor thus not needing firmware." ::= { cpqScsiCntlrEntry 5 } cpqScsiCntlrSlot OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Controller Slot. This is the physical slot in which this controller is installed. This information can be used for identification purposes." ::= { cpqScsiCntlrEntry 6 } cpqScsiCntlrStatus OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), failed(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Controller Status. This is the current status of the controller. The following values are currently defined: other(1) The controller is not operational due to reasons other than hardware failure. The controller may be intentionally disabled. The controller configuration may be in conflict with the configuration of other hardware or software in the system. The controller may have failed initialization. Corrective action is Operating System dependent. Check for diagnostic messages which may have occurred at system boot time. ok(2) The controller is operating normally. failed(3) The controller has failed and is no longer operating. Please run Compaq Diagnostics on the computer system to help identify the problem." ::= { cpqScsiCntlrEntry 7 } cpqScsiCntlrHardResets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Controller Hard Resets. This is the number of times the SCSI Hardware Interface driver detected that the SCSI bus has been reset since the driver was loaded. Hard resets may occasionally occur due to device errors. If this value should rise dramatically, you may have a problem. Check the SCSI bus statistics for unusually high error counts. If there is a device with a large number of bus errors, it may be failing and should be replaced." ::= { cpqScsiCntlrEntry 8 } cpqScsiCntlrSoftResets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Controller Soft Resets. This is the number of times the SCSI Hardware Interface driver has issued a reset command to all devices on a SCSI bus since the driver was loaded. Soft resets occur when the device driver is initializing the SCSI bus for operation and when device errors have left the bus in an ambiguous state. If this value should rise dramatically, you may have a problem. Check the SCSI bus statistics for unusually high error counts. If there is a device with a large number of bus errors, it may be failing and should be and should be replaced." ::= { cpqScsiCntlrEntry 9 } cpqScsiCntlrTimeouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Controller Time-outs. This is the number of times, since the driver was loaded, that the SCSI Hardware Interface driver issued a SCSI command but did not receive a reply within a specified amount of time. Timeouts may occasionally occur when a device fails to process a request because the SCSI bus was busy. If this value should rise dramatically, you may have a problem. Check if you have any non-disk SCSI devices, like tape drives, on the SCSI bus with the drives. Sometimes a non-disk device can hold the SCSI bus for long periods of time causing time-outs." ::= { cpqScsiCntlrEntry 10 } cpqScsiCntlrBaseIOAddr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Controller Base I/O Address. This is the I/O address that the SCSI Hardware Interface driver uses to communicate with the SCSI bus controller. This value can be used for identification purposes." ::= { cpqScsiCntlrEntry 11 } cpqScsiCntlrCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Controller Condition. This is the overall condition of the controller and all of the logical drives and physical drives controlled by it. The following values are defined: other(1) The management agent does not recognize the status as one of those listed below. ok(2) The controller and all of its logical drives and physical drives are operating normally. No user action is required. degraded(3) One or more of the controller's logical drives or physical drives is degraded. You need to check the status of all logical drives and physical drives. failed(4) The controller status is failed. The drives on this controller are inaccessible. Please refer to the controller status field for further information." ::= { cpqScsiCntlrEntry 12 } -- **************************************************************************** -- SCSI Logical Drive Group -- ======================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqScsi Group (1.3.6.1.4.1.232.5) -- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2) -- cpqScsiLogDrv Group (1.3.6.1.4.1.232.5.2.3) -- cpqScsiLogDrvTable (1.3.6.1.4.1.232.5.2.3.1) -- -- -- The LogDrv group contains configuration and statistical information -- about the logical drives associated with Compaq SCSI controllers. -- -- Implementation of the LogDrv group is optional for agents that -- support the Compaq SCSI MIB. -- -- **************************************************************************** cpqScsiLogDrvTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqScsiLogDrvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Table." ::= { cpqScsiLogDrv 1 } cpqScsiLogDrvEntry OBJECT-TYPE SYNTAX CpqScsiLogDrvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Entry." INDEX { cpqScsiLogDrvCntlrIndex, cpqScsiLogDrvBusIndex, cpqScsiLogDrvIndex } ::= { cpqScsiLogDrvTable 1 } CpqScsiLogDrvEntry ::= SEQUENCE { cpqScsiLogDrvCntlrIndex INTEGER, cpqScsiLogDrvBusIndex INTEGER, cpqScsiLogDrvIndex INTEGER, cpqScsiLogDrvFaultTol INTEGER, cpqScsiLogDrvStatus INTEGER, cpqScsiLogDrvSize INTEGER, cpqScsiLogDrvPhyDrvIDs OCTET STRING, cpqScsiLogDrvCondition INTEGER } cpqScsiLogDrvCntlrIndex OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer where the adapter is located." ::= { cpqScsiLogDrvEntry 1 } cpqScsiLogDrvBusIndex OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on a card." ::= { cpqScsiLogDrvEntry 2 } cpqScsiLogDrvIndex OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Index. The logical drive index indicates to which logical drive instance on a SCSI bus this table entry belongs. The logical drive index starts at one and increments for each logical drive on the SCSI bus." ::= { cpqScsiLogDrvEntry 3 } cpqScsiLogDrvFaultTol OBJECT-TYPE SYNTAX INTEGER { other(1), none(2), mirroring(3), dataGuard(4), distribDataGuard(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Fault Tolerance. This shows the fault tolerance mode of the logical drive. To change the fault tolerance mode, run the Compaq EISA Configuration Utility. The following values are valid for the Logical Drive Fault Tolerance: other(1) The management agent does not recognize the status. You may need to upgrade your software. none(2) Fault tolerance is not enabled. If a physical drive reports an error, the data cannot be recovered. mirroring(3) For each physical drive, there is a second physical drive containing identical data. If a drive fails, the data can be retrieved from the mirror drive. dataGuard(4) One of the physical drives is used as a data guard drive and contains the exclusive OR of the data on the remaining drives. If a failure is detected, the data is rebuilt using the data guard information plus information from the other drives. distribDataGuard(5) Distributed Data Guarding, sometimes referred to as RAID 5, is similar to Data Guarding, but instead of storing the parity information on one drive, the information is distributed across all of the drives. If a failure is detected, the data is rebuilt using the data guard information from all the drives." ::= { cpqScsiLogDrvEntry 4 } cpqScsiLogDrvStatus OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), failed(3), unconfigured(4), recovering(5), readyForRebuild(6), rebuilding(7), wrongDrive(8), badConnect(9) } ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Status. The logical drive can be in one of the following states: other(1) The management agent does not recognize the status. You may need to upgrade your software. ok(2) Indicates that the logical drive is in normal operation mode. No user action is required. failed(3) Indicates that more physical drives have failed than the fault tolerance mode of the logical drive can handle without data loss. unconfigured(4) Indicates that the logical drive is not configured. Insure all of the drive switches are properly set and run the Compaq Configuration Utility. recovering(5) Indicates that the logical drive is using Interim Recovery Mode. In Interim Recovery Mode, at least one physical drive has failed, but the logical drive's fault tolerance mode lets the logical drive continue to operate with no data loss. You should replace the failed drive as soon as possible. readyRebuild(6) Indicates that the logical drive is ready for Automatic Data Recovery. The physical drive that failed has been replaced, but the logical drive is still operating in Interim Recovery Mode. rebuilding(7) Indicates that the logical drive is currently doing Automatic Data Recovery. During Automatic Data Recovery, fault tolerance algorithms restore data to the replacement drive. wrongDrive(8) Indicates that the wrong physical drive was replaced after a physical drive failure. You need to return the drive incorrectly replaced and replace the failed drive. badConnect(9) Indicates that a physical drive is not responding. Check the cables connected to it." ::= { cpqScsiLogDrvEntry 5 } cpqScsiLogDrvSize OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Size. This is the size of the logical drive in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufacturers sometimes use the number 1,000,000 as a megabyte when giving drive capacities so this value may differ from the advertised size of a drive." ::= { cpqScsiLogDrvEntry 6 } cpqScsiLogDrvPhyDrvIDs OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Physical Drive IDs. This lists the physical drive SCSI ID's which are associated with this logical drive. These are the same IDs which can be used as indices into the physical drive table. Each byte of the string is an index." ::= { cpqScsiLogDrvEntry 7 } cpqScsiLogDrvCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Logical Drive Condition. This is the overall condition of the logical drive and all of the physical drives which comprise it. The following values are defined: other(1) The management agent does not recognize the status. You may need to upgrade your software. ok(2) The logical drive and all of its physical drives are operating normally. No user action is required. degraded(3) Either the logical drive is degraded or one or more of its physical drives is degraded. You need to check the status of the logical drive and of all its physical drives. failed(4) Either the logical drive has failed or one or more of its physical drives has failed. You need to check the status of the logical drive and of all its physical drives." ::= { cpqScsiLogDrvEntry 8 } -- **************************************************************************** -- SCSI Physical Drive Group -- ========================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqScsi Group (1.3.6.1.4.1.232.5) -- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2) -- cpqScsiPhyDrv Group (1.3.6.1.4.1.232.5.2.4) -- cpqScsiPhyDrvTable (1.3.6.1.4.1.232.5.2.4.1) -- -- The PhyDrv group contains configuration and statistical information -- about the physical drives associated with Compaq SCSI controllers. -- -- Implementation of the PhyDrv group is mandatory for all agents that -- support the Compaq SCSI MIB. -- -- **************************************************************************** cpqScsiPhyDrvTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqScsiPhyDrvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Table." ::= { cpqScsiPhyDrv 1 } cpqScsiPhyDrvEntry OBJECT-TYPE SYNTAX CpqScsiPhyDrvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Entry." INDEX { cpqScsiPhyDrvCntlrIndex, cpqScsiPhyDrvBusIndex, cpqScsiPhyDrvIndex } ::= { cpqScsiPhyDrvTable 1 } CpqScsiPhyDrvEntry ::= SEQUENCE { cpqScsiPhyDrvCntlrIndex INTEGER, cpqScsiPhyDrvBusIndex INTEGER, cpqScsiPhyDrvIndex INTEGER, cpqScsiPhyDrvModel DisplayString, cpqScsiPhyDrvFWRev DisplayString, cpqScsiPhyDrvVendor DisplayString, cpqScsiPhyDrvSize INTEGER, cpqScsiPhyDrvScsiID INTEGER, cpqScsiPhyDrvStatus INTEGER, cpqScsiPhyDrvServiceHours Counter, cpqScsiPhyDrvHighReadSectors Counter, cpqScsiPhyDrvLowReadSectors Counter, cpqScsiPhyDrvHighWriteSectors Counter, cpqScsiPhyDrvLowWriteSectors Counter, cpqScsiPhyDrvHardReadErrs Counter, cpqScsiPhyDrvHardWriteErrs Counter, cpqScsiPhyDrvEccCorrReads Counter, cpqScsiPhyDrvRecvReadErrs Counter, cpqScsiPhyDrvRecvWriteErrs Counter, cpqScsiPhyDrvSeekErrs Counter, cpqScsiPhyDrvSpinupTime INTEGER, cpqScsiPhyDrvUsedReallocs Counter, cpqScsiPhyDrvTimeouts Counter, cpqScsiPhyDrvPostErrs Counter, cpqScsiPhyDrvPostErrCode INTEGER, cpqScsiPhyDrvCondition INTEGER, cpqScsiPhyDrvFuncTest1 Gauge, cpqScsiPhyDrvFuncTest2 Gauge, cpqScsiPhyDrvStatsPreserved INTEGER, cpqScsiPhyDrvSerialNum DisplayString, cpqScsiPhyDrvLocation INTEGER, cpqScsiPhyDrvParent INTEGER, cpqScsiPhyDrvSectorSize INTEGER, cpqScsiPhyDrvHotPlug INTEGER, cpqScsiPhyDrvPlacement INTEGER } cpqScsiPhyDrvCntlrIndex OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer where the adapter is located." ::= { cpqScsiPhyDrvEntry 1 } cpqScsiPhyDrvBusIndex OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on a card." ::= { cpqScsiPhyDrvEntry 2 } cpqScsiPhyDrvIndex OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Index. The physical drive index indicates to which physical drive instance on a SCSI bus this table entry belongs. The physical drive index is the SCSI ID being used by that drive." ::= { cpqScsiPhyDrvEntry 3 } cpqScsiPhyDrvModel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Model. This is a description of the physical drive's model as returned by the SCSI inquiry command. This can be used for identification purposes." ::= { cpqScsiPhyDrvEntry 4 } cpqScsiPhyDrvFWRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Firmware Revision. This is the revision level of the physical drive as returned by the SCSI inquiry command. This can be used for identification purposes." ::= { cpqScsiPhyDrvEntry 5 } cpqScsiPhyDrvVendor OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Vendor. This is the physical drive vendor's name as returned by the SCSI inquiry command. This can be used for identification purposes." ::= { cpqScsiPhyDrvEntry 6 } cpqScsiPhyDrvSize OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Size in MB. This is the size of the physical drive in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufacturers sometimes use the number 1,000,000 as a megabyte when giving drive capacities so this value may differ from the advertised size of a drive." ::= { cpqScsiPhyDrvEntry 7 } cpqScsiPhyDrvScsiID OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive SCSI ID. This is the SCSI ID used by the physical drive. SCSI ID's identify a physical drive on a bus so the controller can communicate with it." ::= { cpqScsiPhyDrvEntry 8 } cpqScsiPhyDrvStatus OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), failed(3), notConfigured(4), badCable(5), missingWasOk(6), missingWasFailed(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Status. The physical drive can be in one of the following states: other(1) The drive is in a state other than one of those listed below. ok(2) Indicates that the physical drive is in normal operation mode. No user action is necessary. failed(3) Indicates that the physical drive has failed and can no longer return data. When convenient, you should bring down the server and run Compaq Diagnostics to help identify the problem. The drive may need to be replaced. notConfigured(4) Indicates that the physical drive is not configured. You need to insure all of the drive's switches are properly set and that the Compaq Configuration Utility has been run. badCable(5) Indicates that a physical drive is not responding. You should check the cables connected to it. You can bring down the server and run Compaq Diagnostics to help identify the problem. missingWasOk(6) Indicates that a physical drive had a status of OK and is no longer present. The drive has been removed. missingWasFailed(7) Indicates that a physical drive had a status of FAILED and is no longer present. The drive has been removed." ::= { cpqScsiPhyDrvEntry 9 } cpqScsiPhyDrvServiceHours OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Service Time in hours. This shows the total number of hours that a physical drive has been operating under the device driver. You can use the service time to calculate rates for other physical drive objects." ::= { cpqScsiPhyDrvEntry 10 } cpqScsiPhyDrvHighReadSectors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Sectors Read (high). The phyDrvHighReadSectors and the phyDrvlowReadSectors together show the total number of sectors read from the physical disk drive during the service time (phyDrvServiceHours). The actual number of sectors read equals the phyDrvHighReadSectors times 2^32 plus the phyDrvLowReadSectors. This information may be useful for determining rates. For example, if you want to calculate the average number of reads per hour of operation, divide this number by the service time." ::= { cpqScsiPhyDrvEntry 11 } cpqScsiPhyDrvLowReadSectors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Sectors Read (low). The phyDrvHighReadSectors and the phyDrvlowReadSectors together show the total number of sectors read from the physical disk drive during the service time (phyDrvServiceHours). The actual number of sectors read equals the phyDrvHighReadSectors times 2^32 plus the phyDrvLowReadSectors. This information may be useful for determining rates. For example, if you want to calculate the average number of reads per hour of operation, divide this number by the service time." ::= { cpqScsiPhyDrvEntry 12 } cpqScsiPhyDrvHighWriteSectors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Sectors Written (high). The phyDrvHighWriteSectors and the phyDrvlowWriteSectors together show the total number of sectors written to the physical disk drive during the service time (phyDrvServiceHours). The actual number of sectors read equals the phyDrvHighWriteSectors times 2^32 plus the phyDrvLowWriteSectors. This information may be useful for determining rates. For example, if you want to calculate the average number of writes per hour of operation, divide this number by the service time." ::= { cpqScsiPhyDrvEntry 13 } cpqScsiPhyDrvLowWriteSectors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Sectors Written (low). The phyDrvHighWriteSectors and the phyDrvlowWriteSectors together show the total number of sectors written to the physical disk drive during the service time (phyDrvServiceHours). The actual number of sectors read equals the phyDrvHighWriteSectors times 2^32 plus the phyDrvLowWriteSectors. This information may be useful for determining rates. For example, if you want to calculate the average number of writes per hour of operation, divide this number by the service time." ::= { cpqScsiPhyDrvEntry 14 } cpqScsiPhyDrvHardReadErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Hard Read Errors. This is the number of read errors that have occurred on a drive that could not be recovered by a physical drive's Error Correction Code (ECC) algorithm, retries or any other recovery mechanisms during the service time (phyDrvServiceHours). If you see any hard read errors there may be a problem. This is often caused by bad media sections on the drive. If the error count continues to rise you may need to replace the drive." ::= { cpqScsiPhyDrvEntry 15 } cpqScsiPhyDrvHardWriteErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Hard Write Errors. This is the number of write errors that have occurred on a drive that could not be recovered by retries or any other recovery mechanisms during the service time (phyDrvServiceHours). If you see any hard write errors there may be a problem. This is often caused by bad media sections on the drive. If the error count continues to rise you may need to replace the drive." ::= { cpqScsiPhyDrvEntry 16 } cpqScsiPhyDrvEccCorrReads OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive ECC Corrected Read Errors (high). This is the number of read requests that the drive had to use an Error Correction Code (ECC) algorithm on to recover data during the service time (phyDrvServiceHours). ECC corrected reads will occasionally occur over time. Having a large number of ECC corrected errors does not necessarily indicate that the drive is failing. However, you may wish to replace a drive with an abnormally high amount in comparison to other similar drives as a precaution." ::= { cpqScsiPhyDrvEntry 17 } cpqScsiPhyDrvRecvReadErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Recovered Read Errors. This is the number of read requests that the drive had to use retries or other recovery mechanisms on to recover data during the service time (phyDrvServiceHours). Retry corrected reads will occasionally occur over time. Having a large number of retry corrected errors does not necessarily indicate that the drive is failing. However, you may wish to replace a drive with an abnormally high amount in comparison to other similiar drives as a precaution." ::= { cpqScsiPhyDrvEntry 18 } cpqScsiPhyDrvRecvWriteErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Recovered Write Errors. This is the number of write requests that the drive had to use retries or other recovery mechanisms on to recover data during the service time (phyDrvServiceHours). Retry corrected writes will occasionally occur over time. Having a large number of retry corrected errors does not necessarily indicate that the drive is failing. However, you may wish to replace a drive with an abnormally high amount in comparison to other similiar drives as a precaution." ::= { cpqScsiPhyDrvEntry 19 } cpqScsiPhyDrvSeekErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Seek Errors. This is the number of times a drive head seek failed during the service time (phyDrvServiceHours). Seek errors will occasionally occur over time. Having a large number of seek errors does not necessarily indicate that the drive is failing. However, you may wish to replace a drive with an abnormally high amount in comparison to other similiar drives as a precaution." ::= { cpqScsiPhyDrvEntry 20 } cpqScsiPhyDrvSpinupTime OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Spin up Time (tenths of seconds). This is the time it takes for a physical drive to spin up to full speed. Disks require time to gain momentum and reach operating speed. As cars are tested to go from 0 mph to 60 mph in x number of seconds, drive manufacturers have preset expectations for the time it takes the drive to spin to full speed. Drives that do not meet these expectations may have problems. If the drive is having problems spinning up, this value will increase over time. Eventually, the drive may fail to spin up altogether. If you see a large increase in this value over time, you may want to replace the drive as a precaution." ::= { cpqScsiPhyDrvEntry 21 } cpqScsiPhyDrvUsedReallocs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Used Reallocation Sectors. This shows the number of sectors of the reallocation area that have been used by the physical drive over the life of the drive. Because of the nature of magnetic disks, certain sectors on a drive may have media defects. The reallocation area is part of the disk drive that the drive manufacturer sets aside to compensate for these defects. The drive writes information addressed from these unusable sectors to available sectors in the reallocation area. If all of the reserved sectors have been used, then there is no way for the drive to remap bad sectors and the drive will start failing. Unfortunately, the number of reallocation sectors originally reserved for this purpose is drive specific and you must contact the drive vendor for these values. If the current value starts to approach the maximum reserved you may wish to replace the drive before it fails." ::= { cpqScsiPhyDrvEntry 22 } cpqScsiPhyDrvTimeouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Time-out Errors. This is the number of times the drive failed to complete a request within a specified amount of time during the service time (phyDrvServiceHours). Time-outs may occasionally occur when a device fails to process a request because the SCSI bus was busy. If this value should rise dramatically, you may have a problem. Check if you have any non-disk SCSI devices, like tape drives, on the SCSI bus with the drives. Sometimes a non-disk device can hold onto the SCSI bus for long periods of time causing time-outs." ::= { cpqScsiPhyDrvEntry 23 } cpqScsiPhyDrvPostErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Power On Self Test (POST) Errors. This is the number of times that a drive failed its self test during the service time (phyDrvServiceHours). The drive does a self test each time power is applied to the system. If you see any self test errors there may be a problem. You can run Compaq Diagnostics to help identify the problem." ::= { cpqScsiPhyDrvEntry 24 } cpqScsiPhyDrvPostErrCode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Last POST Error Code. This is the result of the last SCSI command which caused a self test to fail. The value is split into three fields. The first byte is the SCSI Sense Qualifier. The second byte is the SCSI Sense Code. The third byte is the SCSI Sense Key. You will need to refer to a SCSI-2 specification for the valid values of these fields." ::= { cpqScsiPhyDrvEntry 25 } cpqScsiPhyDrvCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Condition. This is the overall condition of the physical drive. The following values are defined: other(1) The Insight agent does not recognize the status. You may need to upgrade your software. ok(2) The physical drive is operating normally. No user action is required. failed(4) The physical drives has failed. When convenient, you should bring down the server and run Compaq Diagnostics to help identify the problem." ::= { cpqScsiPhyDrvEntry 26 } cpqScsiPhyDrvFuncTest1 OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Functional Test 1. This is a percentage value that represents the operating efficiency of a drive. The functional test issues a series of SCSI commands and times the results. When the drive has the test run for the very first time (service time is zero), the results are saved as the baseline value. Then, whenever the test is executed the current result is compared to the baseline result and expressed as a percent. If the percentage result should drop rapidly there may be a problem with the drive. You may wish to replace the drive as a precaution." ::= { cpqScsiPhyDrvEntry 27 } cpqScsiPhyDrvFuncTest2 OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Functional Test 2. This is a percentage value that represents the operating efficiency of a drive. The functional test issues a series of SCSI commands and times the results. When the drive has the test run for the very first time (service time is zero), the results are saved as the baseline value. Then, whenever the test is executed the current result is compared to the baseline result and expressed as a percent. If the percentage result should drop rapidly there may be a problem with the drive. You may wish to replace the drive as a precaution." ::= { cpqScsiPhyDrvEntry 28 } cpqScsiPhyDrvStatsPreserved OBJECT-TYPE SYNTAX INTEGER { other(1), inNVRAM(2), onDisk(3), noCPUSupport(4), noFreeNVRAM(5), noDrvSupport(6), noSoftwareSupport(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Statistics Preservation Method. This value indicates how all of the objects in this table are saved over a power cycle. If the objects are not saved then all of their values will be reset whenever the device driver is unloaded. The following values are defined: other(1) The Insight agent does not recognize the status. You may need to upgrade your software. inNVRAM(2) The objects are saved in non-volatile memory in the computer system. onDisk(3) The objects are saved on the physical drives in reserved sectors. noCPUSupport(4) The objects are not saved across power cycles because the hardware does not support this operation. noFreeNVRAM(5) The objects are not saved across power cycles because all of the available non-volatile memory is in use. noDrvSupport(6) The objects are not saved across power cycles because the physical drive does not contain a unique identifier to save it under. noSoftwareSupport(7) The objects are not saved across power cycles because either the device driver or computer system firmware do not provide support." ::= { cpqScsiPhyDrvEntry 29 } cpqScsiPhyDrvSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..13)) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Serial Number. This is the serial number assigned to the physical drive. This value is based upon the serial number as returned by the SCSI inquiry command but may have been modified due to space limitations. This can be used for identification purposes." ::= { cpqScsiPhyDrvEntry 30 } cpqScsiPhyDrvLocation OBJECT-TYPE SYNTAX INTEGER { other(1), proliant(2) } ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Physical Drive Location. This is the physical location of where the drive is located. The following values are defined: other(1) The drives are not located in any special product that identifies the location. proliant(2) The drives are located in the Compaq ProLiant Storage System." ::= { cpqScsiPhyDrvEntry 31 } cpqScsiPhyDrvParent OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Parent. This is the logical drive index to which this physical drive belongs." ::= { cpqScsiPhyDrvEntry 32 } cpqScsiPhyDrvSectorSize OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Sector Size in Bytes. This allows one to convert counters that are reported in sectors to bytes." ::= { cpqScsiPhyDrvEntry 33 } cpqScsiPhyDrvHotPlug OBJECT-TYPE SYNTAX INTEGER { other(1), hotPlug(2), nonHotPlug(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Hot Plug Support Status. The following values are defined: other(1) The Insight agent is unable to determine if this drive supports hot plug replacement. hotPlug(2) The drive supports hot plug replacement. nonhotPlug(3) The drive does not support hot plug replacement." ::= { cpqScsiPhyDrvEntry 34 } cpqScsiPhyDrvPlacement OBJECT-TYPE SYNTAX INTEGER { other(1), internal(2), external(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Physical Drive Placement. The following values are defined: other(1) The agent is unable to determine if the drive is internal or external to the system chassis. internal(2) The drive is located in the system chassis. external(3) The drive is located outside the system chassis in an expansion box." ::= { cpqScsiPhyDrvEntry 35 } -- **************************************************************************** -- SCSI Target Group -- ================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqScsi Group (1.3.6.1.4.1.232.5) -- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2) -- cpqScsiTarget Group (1.3.6.1.4.1.232.5.2.5) -- cpqScsiTargetTable (1.3.6.1.4.1.232.5.2.5.1) -- -- The SCSI target group describes the generic SCSI bus information about -- the SCSI bus targets (devices) in the system. -- -- Implementation of the SCSI target group is mandatory for all agents -- supporting the Compaq SCSI MIB. -- -- **************************************************************************** cpqScsiTargetTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqScsiTargetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Compaq SCSI Target Table." ::= { cpqScsiTarget 1 } cpqScsiTargetEntry OBJECT-TYPE SYNTAX CpqScsiTargetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Compaq SCSI Target Entry." INDEX { cpqScsiTargetCntlrIndex, cpqScsiTargetBusIndex, cpqScsiTargetScsiIdIndex } ::= { cpqScsiTargetTable 1 } CpqScsiTargetEntry ::= SEQUENCE { cpqScsiTargetCntlrIndex INTEGER, cpqScsiTargetBusIndex INTEGER, cpqScsiTargetScsiIdIndex INTEGER, cpqScsiTargetType INTEGER, cpqScsiTargetModel DisplayString, cpqScsiTargetFWRev DisplayString, cpqScsiTargetVendor DisplayString, cpqScsiTargetParityErrs Counter, cpqScsiTargetPhaseErrs Counter, cpqScsiTargetSelectTimeouts Counter, cpqScsiTargetMsgRejects Counter, cpqScsiTargetNegPeriod INTEGER, cpqScsiTargetLocation INTEGER } cpqScsiTargetCntlrIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Target Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer system where the adapter is located." ::= { cpqScsiTargetEntry 1 } cpqScsiTargetBusIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Target Bus Index. The bus index indicates to which SCSI bus instance on an adapter card this table entry belongs. The instances start at one and increment for each SCSI bus on a card." ::= { cpqScsiTargetEntry 2 } cpqScsiTargetScsiIdIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Target Device Index. The device index indicates to which device instance on a SCSI bus this table entry belongs. The device index is the SCSI ID being used by that device." ::= { cpqScsiTargetEntry 3 } cpqScsiTargetType OBJECT-TYPE SYNTAX INTEGER { other(1), disk(2), tape(3), printer(4), processor(5), wormDrive(6), cd-rom(7), scanner(8), optical(9), jukeBox(10), commDev(11) } ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Device Type. This is the type of SCSI device. The following types are defined: other(1) The Insight agent does not recognize this type. You may need to upgrade your software. disk(2) This is a direct-access device like a disk drive. tape(3) This is a sequential-access device like a tape drive. printer(4) This is a printer device. processor(5) This is a processor device like the Compaq ProLiant Storage System. worm(6) This is a write-once, read-many times device. cd-rom(7) This is a CD-ROM, read-only device. scanner(8) This is a scanner device. optical(9) This is an optical memory device. jukeBox(10) This is a media changer device like a jukebox. commDev(11) This is a communications device like a LAN bridge." ::= { cpqScsiTargetEntry 4 } cpqScsiTargetModel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Device Model. This is a description of the device's model as returned by the SCSI inquiry command. This can be used for identification purposes." ::= { cpqScsiTargetEntry 5 } cpqScsiTargetFWRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Device Firmware Revision. This is the revision level of the device as returned by the SCSI inquiry command. This can be used for identification purposes." ::= { cpqScsiTargetEntry 6 } cpqScsiTargetVendor OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Device Vendor. This is the device vendor's name as returned by the SCSI inquiry command. This can be used for identification purposes." ::= { cpqScsiTargetEntry 7 } cpqScsiTargetParityErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Device Bus Parity Errors. This is the number of parity errors seen on the SCSI bus while processing commands for this SCSI ID. This value is maintained since the SCSI Hardware Interface driver was loaded. Parity errors may occasionally occur. If this value should rise dramatically, you may have a problem. Some common causes include radio frequency interference (RFI) on the bus cables, bad or missing terminating resisters on the drives or having more than one device with the same SCSI ID. Insure the bus cable is free of obstructions and that the devices on the bus are properly configured." ::= { cpqScsiTargetEntry 8 } cpqScsiTargetPhaseErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Device Bus Phase Errors. This is the number of times the SCSI bus entered an invalid operating state while processing commands for the SCSI ID. This value is maintained since the SCSI Hardware Interface driver was loaded. If you see any phase errors you may have a problem. Phase errors can be caused by a device which is not operating correctly. If the phase errors continue to increase the device should be replaced." ::= { cpqScsiTargetEntry 9 } cpqScsiTargetSelectTimeouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Device Bus Select Time-outs. This is the number of times the controller attempted to start communications with a device by selecting it but the device did not respond. If you see any select time-outs you may have a problem. The device may have hung during operations. The SCSI controller will attempt to reset the device but if this value continues to increment you may need to power cycle the device." ::= { cpqScsiTargetEntry 10 } cpqScsiTargetMsgRejects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Device Bus Message Rejects. This is the number of times the device rejected a command because it did not support the specified operation since the SCSI Hardware Interface driver was loaded. A large number for this object does not indicate a problem. It only shows that the device does not support certain advanced SCSI commands that the device driver issued." ::= { cpqScsiTargetEntry 11 } cpqScsiTargetNegPeriod OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Device Negotiated Period. This is the amount of time that was negotiated between the controller and the device as a synchronous transfer window. A synchronous transfer window is how long the device can transfer data without requiring an acknowledgment from the controller. In general the larger the negotiated period is, the lower the device throughput. This value is reported in quarters of nanoseconds." ::= { cpqScsiTargetEntry 12 } cpqScsiTargetLocation OBJECT-TYPE SYNTAX INTEGER { other(1), proliant(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Device Location. This is the physical location of where the device is located. The following values are defined: other(1) The device is not located in any special product that identifies the location. proliant(2) The device is located in the Compaq ProLiant Storage System." ::= { cpqScsiTargetEntry 13 } -- **************************************************************************** -- SCSI Trap Log -- ============= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqScsi Group (1.3.6.1.4.1.232.5) -- cpqScsiTrap (1.3.6.1.4.1.232.5.3) (deprecated) -- -- The trap group maintains information about the number of traps issued -- from the scsiDrv enterprise. The trap group also maintains a table of -- the last several traps issued. This table is intended to give a -- management application some recent status information immediately upon -- accessing the agent. -- -- Implementation of the Trap group is optional for agents that support the -- Compaq SCSI MIB. -- -- **************************************************************************** cpqScsiTrapPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The total number of trap packets issued by the SCSI enterprise since the instrument agent was loaded." ::= { cpqScsiTrap 1 } cpqScsiTrapLogMaxSize OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The maximum number of entries that will currently be kept in the trap log. If the maximum size has been reached and a new trap occurs the oldest trap will be removed." ::= { cpqScsiTrap 2 } -- **************************************************************************** -- SCSI Trap Log -- ============= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqScsi Group (1.3.6.1.4.1.232.5) -- cpqScsiTrap (1.3.6.1.4.1.232.5.3) (deprecated) -- cpqScsiTrapLogTable (1.3.6.1.4.1.232.5.3.3) (deprecated) -- -- **************************************************************************** cpqScsiTrapLogTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqScsiTrapLogEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An ordered list of trap log entries (conceptually a queue). The trap log entries will be kept in the order in which they were generated with the most recent trap at index 1 and the oldest trap entry at index trapLogMaxSize. If the maximum number size has been reached and a new trap occurs the oldest trap will be removed when the new trap is added so the trapMaxLogSize is not exceeded." ::= { cpqScsiTrap 3 } cpqScsiTrapLogEntry OBJECT-TYPE SYNTAX CpqScsiTrapLogEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A description of a trap event." INDEX { cpqScsiTrapLogIndex } ::= { cpqScsiTrapLogTable 1 } CpqScsiTrapLogEntry ::= SEQUENCE { cpqScsiTrapLogIndex INTEGER, cpqScsiTrapType INTEGER, cpqScsiTrapTime OCTET STRING } cpqScsiTrapLogIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The value of this object uniquely identifies this trapLogEntry at this time. The most recent trap will have an index of 1 and the oldest trap will have an index of trapLogMaxSize. Because of the queue-like nature of the trapLog this particular trap event's index will change as new traps are issued." ::= { cpqScsiTrapLogEntry 1 } cpqScsiTrapType OBJECT-TYPE SYNTAX INTEGER { cpqScsiCntlrStatusChange(1), cpqScsiLogDrvStatusChange(2), cpqScsiPhyDrvStatusChange(3), cpqScsi2CntlrStatusChange(5001), cpqScsi2LogDrvStatusChange(5002), cpqScsi2PhyDrvStatusChange(5003) } ACCESS read-only STATUS deprecated DESCRIPTION "The type of the trap event that this entry describes. This number refers to an entry in a list of traps enumerating the possible traps the Compaq SCSI agent may issue." ::= { cpqScsiTrapLogEntry 2 } cpqScsiTrapTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) ACCESS read-only STATUS deprecated DESCRIPTION "The time of the trap event that this entry describes. The time is given in year (first octet), month, day of month, hour, minute, second (last octet) order. Each octet gives the value in Binary Coded Decimal (BCD)." ::= { cpqScsiTrapLogEntry 3 } -- **************************************************************************** -- SCSI Bus Group -- ============== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqSbScsiBus Group (1.3.6.1.4.1.232.7) (deprecated) -- cpqSbScsiMibRev Group (1.3.6.1.4.1.232.7.1) (deprecated) -- cpqSbDevice Group (1.3.6.1.4.1.232.7.2) (deprecated) -- -- The scsiBus Group contains a MIB Revision group that contains -- information about the revision of this document to which an Insight -- Agent conforms. The scsiBus Group contains component child groups -- that contains information describing the parts of the SCSI subsystems -- in this machine. -- -- The status of this group has been changed to deprecated. All useful -- Information in this group can also be found in the cpqScsiTarget group. -- Support of this group is optional for agents implementing the SCSI MIB. -- This group should only be implemented if compatibility with older versions -- of Compaq Insight Manager version 1.x is required. -- -- -- An Insight Agent conforming to this document will return a mibRevMajor -- of one and a mibRevMinor of zero. -- -- -- The status of this group has been changed to deprecated. All useful -- Information in this group can also be found in the cpqScsiTarget group. -- Support of this group is optional for agents implementing the SCSI MIB. -- This group should only be implemented if compatibility with older versions -- of Compaq Insight Manager version 1.x is desired. -- -- **************************************************************************** cpqSbMibRevMajor OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS deprecated DESCRIPTION "The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level." ::= { cpqSbScsiMibRev 1 } cpqSbMibRevMinor OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS deprecated DESCRIPTION "The Minor Revision level. A change in the minor revision level may represent some minor additional support; no changes to any pre-existing information has occurred." ::= { cpqSbScsiMibRev 2 } -- **************************************************************************** -- The SCSI Device Group (Deprecated) -- **************************************************************************** -- -- The SCSI Device group describes the devices on the SCSI buses in the -- system. -- -- Implementation of the SCSI Device group is mandatory for all agents -- supporting the Compaq SCSI Drive MIB. -- -- -- The status of this group has been changed to deprecated. All useful -- Information in this group can also be found in the cpqScsiTarget group. -- Support of this group is optional for agents implementing the SCSI MIB. -- This group should only be implemented if compatibility with older versions -- of Compaq Insight Manager version 1.x is desired. cpqSbDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqSbDeviceEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Compaq SCSI Drive Bus Table" ::= { cpqSbDevice 2 } cpqSbDeviceEntry OBJECT-TYPE SYNTAX CpqSbDeviceEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Compaq SCSI Drive Bus Entry" INDEX { cpqSbDevCntlrIndex, cpqSbDevBusIndex, cpqSbDevScsiIdIndex } ::= { cpqSbDeviceTable 1 } CpqSbDeviceEntry ::= SEQUENCE { cpqSbDevCntlrIndex INTEGER, cpqSbDevBusIndex INTEGER, cpqSbDevScsiIdIndex INTEGER, cpqSbDevType INTEGER, cpqSbDevModel DisplayString, cpqSbDevFWRev DisplayString, cpqSbDevVendor DisplayString, cpqSbDevParityErrs Counter, cpqSbDevPhaseErrs Counter, cpqSbDevSelectTimeouts Counter, cpqSbDevMsgRejects Counter, cpqSbDevNegPeriod INTEGER, cpqSbDevLocation INTEGER } cpqSbDevCntlrIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Device Bus Controller Index The controller index indicates which SCSI adapter card instance this table entry belongs to. The controller index is the physical slot in the computer system where the adapter card is located." ::= { cpqSbDeviceEntry 1 } cpqSbDevBusIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Device Bus Index The bus index indicates which SCSI bus instance on an adapter card this table entry belongs to. The instances start at one and increment for each SCSI bus on a card." ::= { cpqSbDeviceEntry 2 } cpqSbDevScsiIdIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Device Bus Physical Drive Index The physical drive index indicates which physical drive instance on a SCSI bus this table entry belongs to. The physical drive index is the SCSI ID being used by that device." ::= { cpqSbDeviceEntry 3 } cpqSbDevType OBJECT-TYPE SYNTAX INTEGER { other(1), disk(2), tape(3), printer(4), processor(5), wormDrive(6), cd-rom(7), scanner(8), optical(9), jukeBox(10), commDev(11) } ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Device Type This is the type of SCSI device. The following types are defined: other(1) The management agent does not recognize this type. You may need to upgrade you software. disk(2) This is a direct-access device like a disk drive. tape(3) This is a sequential-access device like a tape drive. printer(4) This is a printer device. processor(5) This is a processor device like the Compaq ProLiant Storage System. worm(6) This is a write-once, read-many times device. cd-rom(7) This is a CD-ROM, read-only device. scanner(8) This is a scanner device. optical(9) This is an optical memory device. jukeBox(10) This is a medium changer device like a jukebox. commDev(11) This is a communications device like a LAN bridge." ::= { cpqSbDeviceEntry 4 } cpqSbDevModel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Device Model This is a description of the physical drive's model as returned by the SCSI inquiry command. This can be used for identification purposes." ::= { cpqSbDeviceEntry 5 } cpqSbDevFWRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Device Firmware Revision This is the revision level of the physical drive as returned by the SCSI inquiry command. This can be used for identification purposes." ::= { cpqSbDeviceEntry 6 } cpqSbDevVendor OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Device Vendor. This is the physical drive vendor's name as returned by the SCSI inquiry command. This can be used for identification purposes." ::= { cpqSbDeviceEntry 7 } cpqSbDevParityErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Device Bus Parity Errors This is the number of parity errors seen on the SCSI bus while processing commands for this SCSI ID since the SCSI Interface Module was loaded. Parity errors may occasionally occur. If this value should rise dramatically, you may have a problem. Some common causes include radio frequency interference (RFI) on the bus cables, bad or missing terminating resisters on the drives or having more than one device with the same SCSI ID. Insure the bus cable is free of obstructions and that the devices on the bus are properly configured." ::= { cpqSbDeviceEntry 8 } cpqSbDevPhaseErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Device Bus Phase Errors This is the number of times the SCSI bus entered an invalid operating state while processing commands for the SCSI ID since the SCSI Hardware Interface driver was loaded. If you see any phase errors you may have a problem. Phase errors can be caused by a device which is not operating correctly. If the phase errors continue to increase the device should be replaced." ::= { cpqSbDeviceEntry 9 } cpqSbDevSelectTimeouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Device Bus Select Time-outs This is the number of times the controller attempted to start communications with a device by selecting it but the device did not respond. If you see any select time-outs you may have a problem. The device may have hung during operations. The SCSI controller will attempt to reset the device but if this value continues to increment you may need to power cycle the device." ::= { cpqSbDeviceEntry 10 } cpqSbDevMsgRejects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Device Bus Message Rejects This is the number of times the device rejected a command because it did not support the specified operation since the SCSI Hardware Interface driver was loaded. A large number for this object does not indicate a problem. It only shows that the device does not support certain advanced SCSI commands that the device driver issued." ::= { cpqSbDeviceEntry 11 } cpqSbDevNegPeriod OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Device Negotiated Period This is the amount of time that was negotiated between the controller and the device as a synchronous transfer window. A synchronous transfer window is how long the device can transfer data without requiring an acknowledgment from the controller. In general the larger the negotiated period is, the higher the device throughput." ::= { cpqSbDeviceEntry 12 } cpqSbDevLocation OBJECT-TYPE SYNTAX INTEGER { other(1), proliant(2) } ACCESS read-only STATUS deprecated DESCRIPTION "Compaq SCSI Device Location This is the physical location of where the device is located. The following values are defined: other(1) The drives are not located in any special product that identifies the location. proliant(2) The drives are located in the Compaq ProLiant Storage System." ::= { cpqSbDeviceEntry 13 } -- **************************************************************************** -- SCSI Trap Definitions -- ====================== -- -- The SNMP trap messages must not be bigger than 484 octets (bytes). -- -- Trap support in an SNMP agent implementation is optional. An SNMP -- agent implementation may support all, some, or none of the traps. -- If traps are supported, The user should be provided with the option of -- disabling traps. -- -- ************************************************************************** cpqScsiCntlrStatusChange TRAP-TYPE ENTERPRISE cpqScsi VARIABLES { cpqScsiCntlrStatus } DESCRIPTION "SCSI Controller Status Change. The Insight Agent has detected a change in the controller status of a Compaq SCSI Controller. The variable cpqScsiCntlrStatus indicates the current controller status." --#TYPE "SCSI Controller Status Change" --#SUMMARY "Status is now %d." --#ARGUMENTS {0} --#SEVERITY CRITICAL --#TIMEINDEX 99 ::= 1 cpqScsiLogDrvStatusChange TRAP-TYPE ENTERPRISE cpqScsi VARIABLES { cpqScsiLogDrvStatus } DESCRIPTION "Logical Drive Status Change. The Insight Agent has detected a change in the Logical Drive Status of a Compaq SCSI logical drive. The current logical drive status is indicated by the cpqScsiLogDrvStatus variable." --#TYPE "SCSI Logical Drive Status Change" --#SUMMARY "Status is now %d." --#ARGUMENTS {0} --#SEVERITY CRITICAL --#TIMEINDEX 99 ::= 2 cpqScsiPhyDrvStatusChange TRAP-TYPE ENTERPRISE cpqScsi VARIABLES { cpqScsiPhyDrvStatus } DESCRIPTION "Physical Drive Status Change. The Insight Agent has detected a change in the status of a Compaq SCSI physical drive. The current physical drive status is indicated in the cpqScsiPhyDrvStatus variable." --#TYPE "SCSI Physical Drive Status Change" --#SUMMARY "Status is now %d." --#ARGUMENTS {0} --#SEVERITY CRITICAL --#TIMEINDEX 99 ::= 3 cpqScsi2CntlrStatusChange TRAP-TYPE ENTERPRISE compaq VARIABLES { cpqScsiCntlrStatus } DESCRIPTION "SCSI Controller Status Change. The Insight Agent has detected a change in the controller status of a Compaq SCSI Controller. The variable cpqScsiCntlrStatus indicates the current controller status." --#TYPE "SCSI Controller Status Change" --#SUMMARY "Status is now %d." --#ARGUMENTS {0} --#SEVERITY CRITICAL --#TIMEINDEX 99 ::= 5001 cpqScsi2LogDrvStatusChange TRAP-TYPE ENTERPRISE compaq VARIABLES { cpqScsiLogDrvStatus } DESCRIPTION "Logical Drive Status Change. The Insight Agent has detected a change in the Logical Drive Status of a Compaq SCSI logical drive. The current logical drive status is indicated by the cpqScsiLogDrvStatus variable." --#TYPE "SCSI Logical Drive Status Change" --#SUMMARY "Status is now %d." --#ARGUMENTS {0} --#SEVERITY CRITICAL --#TIMEINDEX 99 ::= 5002 cpqScsi2PhyDrvStatusChange TRAP-TYPE ENTERPRISE compaq VARIABLES { cpqScsiPhyDrvStatus } DESCRIPTION "Physical Drive Status Change. The Insight Agent has detected a change in the status of a Compaq SCSI physical drive. The current physical drive status is indicated in the cpqScsiPhyDrvStatus variable." --#TYPE "SCSI Physical Drive Status Change" --#SUMMARY "Status is now %d." --#ARGUMENTS {0} --#SEVERITY CRITICAL --#TIMEINDEX 99 ::= 5003 END