CPQSRVMN-MIB device MIB details by Compaq
CPQSRVMN-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CPQSRVMN-MIB.
| Vendor: | Compaq |
|---|---|
| Mib: | CPQSRVMN-MIB [download] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- **************************************************************************** -- -- Compaq Server Manager/R -- Management Information Base for SNMP Network Management -- -- -- Copyright 1992, 1993, Compaq Computer Corporation. -- All Rights Reserved. -- -- The information in this document is subject to change without notice. -- -- COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL -- OR EDITORIAL ERRORS OR OMISSIONS CONATINED HEREIN; NOR FOR INCIDENTAL -- OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, -- OR USE OF THIS MATERIAL. -- -- Refer to the READMIB.RDM file for more information about the -- organization of the information in the Compaq Enterprise. -- -- The Compaq Enterprise number is 232. -- The ASN.1 prefix to, and including the Compaq Enterprise is: -- 1.3.6.1.4.1.232 -- -- **************************************************************************** CPQSRVMN-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI Counter FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; compaq OBJECT IDENTIFIER ::= { enterprises 232 } cpqServerManager OBJECT IDENTIFIER ::= { compaq 4 } cpqSmMibRev OBJECT IDENTIFIER ::= { cpqServerManager 1 } cpqSmComponent OBJECT IDENTIFIER ::= { cpqServerManager 2 } cpqSmTrap OBJECT IDENTIFIER ::= { cpqServerManager 3 } cpqSmInterface OBJECT IDENTIFIER ::= { cpqSmComponent 1 } cpqSmCntlr OBJECT IDENTIFIER ::= { cpqSmComponent 2 } cpqSmObjData OBJECT IDENTIFIER ::= { cpqSmComponent 3 } cpqSmAsyncComm OBJECT IDENTIFIER ::= { cpqSmComponent 4 } cpqSmAlert OBJECT IDENTIFIER ::= { cpqSmComponent 5 } cpqSmOsNetWare3x OBJECT IDENTIFIER ::= { cpqSmInterface 1 } -- **************************************************************************** -- Server Manager NetWare Driver Group -- =================================== -- -- The compaq enterprise (232) -- cpqServerManager Group (232.4) -- cpqSmComponent Group (232.4.2) -- cpqSmInterface Group (232.4.2.1) -- cpqSmOsNetWare3x Group (232.4.2.1.1) -- -- The cpqSmOsNetWare3x group describes the Server Manager NetWare v3.x -- OS interface. This information describes the driver module and its -- status. -- -- Implementation of the cpqSmOsNetWare3x group is mandatory for all -- agents that support the Compaq Server Manager MIB in a NetWare -- host operating environment. -- -- **************************************************************************** cpqSmNw3xDriverName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Driver Name. This value identifies the NetWare loadable module providing the operating system access to the Server Manager board." ::= { cpqSmOsNetWare3x 1 } cpqSmNw3xDriverDate OBJECT-TYPE SYNTAX DisplayString (SIZE (8)) ACCESS read-only STATUS mandatory DESCRIPTION "Driver Date. The date of the NetWare loadable module providing the operating system access to the Server Manager board. The date is provided in mm/dd/yy format." ::= { cpqSmOsNetWare3x 2 } cpqSmNw3xDriverVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "Driver Version. This is the version of the NetWare Loadable Module (NLM) providing the operating system access to the Server Manager board. Version 1.20 or greater of the driver is required to use the Server Manager SNMP agent." ::= { cpqSmOsNetWare3x 3 } cpqSmNw3xDriverIssuedCommands OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Commands Sent. The number of commands the driver has issued to the Server Manager board since it was loaded." ::= { cpqSmOsNetWare3x 4 } cpqSmNw3xDriverReceivedCommands OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Commands Received. The number of commands the driver has received from the Server Manager board since it was loaded." ::= { cpqSmOsNetWare3x 5 } cpqSmNw3xDriverWatchdogFrequency OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Watchdog Frequency. The number of minutes between watchdog commands. The watchdog command is the way the Server Manager board determines that the driver and NetWare are still running. A value of zero (0) means no watchdog is being performed." ::= { cpqSmOsNetWare3x 6 } cpqSmNw3xDriverClockSyncFrequency OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Clock Sync Frequency. The number of minutes between clock synchronization commands. The clock synchronization command sets the Server Manager board's clock to the same value as the NetWare OS clock. A value of zero (0) means no clock synchronization is being performed." ::= { cpqSmOsNetWare3x 7 } cpqSmNw3xDriverIssuedWatchdogs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Watchdog Commands Issues. The number of watch dog commands issued since the driver was loaded." ::= { cpqSmOsNetWare3x 8 } cpqSmNw3xDriverIssuedClockSyncs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Clock Sync Commands Issues. The number of clock synchronization commands performed since the driver was loaded." ::= { cpqSmOsNetWare3x 9 } cpqSmNw3xDriverMemoryAllocationFailedErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Memory Allocation Errors. The number of times that a memory allocation failed when a command received by the driver required a buffer to be allocated." ::= { cpqSmOsNetWare3x 10 } cpqSmNw3xDriverBoardResets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Board Resets. The number of times the driver detected the Server Manager board resetting itself." ::= { cpqSmOsNetWare3x 11 } cpqSmNw3xBoardState OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), failed(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Board State. The driver's perception of the Server Manager board's state." ::= { cpqSmOsNetWare3x 12 } -- **************************************************************************** -- Server Manager Controller Information Group -- =========================================== -- -- The compaq enterprise (232) -- cpqServerManager Group (232.4) -- cpqSmComponent Group (232.4.2) -- cpqSmCntrl Group (232.4.2.2) -- -- The cpqSmCntlr group contains the configuration and statistical -- information of the Server Manager controller. -- -- Implementation of the cpqSmCntlr group is mandatory for all agents -- that support the Compaq Server Manager MIB. -- -- **************************************************************************** cpqSmCntlrBoardName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Board Name. The name of the Server Manager board supplied by the user during configuration of the Server Manager board using the EISA Configuration Utility." ::= { cpqSmCntlr 1 } cpqSmCntlrBoardId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Board ID. The ID of the Server Manager board supplied by the user during configuration of the Server Manager board using the EISA Configuration Utility." ::= { cpqSmCntlr 2 } cpqSmCntlrRomDate OBJECT-TYPE SYNTAX DisplayString (SIZE (8)) ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager ROM Date. The date of the firmware on the board in mm/dd/yy format." ::= { cpqSmCntlr 3 } cpqSmCntlrCountryCode OBJECT-TYPE SYNTAX DisplayString (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Country Code. An abbreviation for the country (language) for which the Server Manager board is configured. The possible values are: AE Arabic - English AF Arabic - French AU Australia BE Belgium BF Belgium - Flemish CE Canadian - English CF Canadian - French CH China DN Denmark DU Dutch EE European - English FN Finland FR France GR Germany HA Hungary IT Italy IS Israel KA Kangi LA Latin America ME Middle East NE Netherlands NO Norway PO Portugal SP Spain SW Sweden ST Switzerland SF Swiss - French SG Swiss - German TA Taiwan UK United Kingdom US United States" ::= { cpqSmCntlr 4 } cpqSmCntlrVoiceRomStatus OBJECT-TYPE SYNTAX INTEGER { other(1), notInstalled(2), installed(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Voice ROM Status. The value specifies if the Server Manager board has a voice ROM installed." ::= { cpqSmCntlr 5 } cpqSmCntlrBatteryStatus OBJECT-TYPE SYNTAX INTEGER { other(1), connected(2), disconnected(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Battery Connection Status." ::= { cpqSmCntlr 6 } cpqSmCntlrDormantModeStatus OBJECT-TYPE SYNTAX INTEGER { other(1), normal(2), dormantOnPowerDown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Dormant Mode Status. The status of the power management system." ::= { cpqSmCntlr 7 } cpqSmCntlrSelfTestErrorCode OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Self Test Error Code. The result of the self test run by the Server Manager board firmware. This value is a set of bit flags defined as follows (bit 0 is the least significant bit): Bit 0 set - ROM Checksum failed Bit 1 set - RAM test failed Bit 2 set - 80186 timer failed Bit 3 set - Built in modem failed Bit 4 set - Direct connect interface failed Bit 5 set - Real time clock failed Bit 6 set - Temperature and/or voltage sensor failed Bit 7 set - DTMF (tone detection circuitry) failed Bit 8 set - VSL (voice synthesis logic circuitry) failed Bit 9 set - Host bus monitor failed Bit 10 set - Bus master interface failed Bit 11 set - Battery is broken Bits 12 - 15 are currently reserved. A value of zero (no bits are set) indicates no self test error has occured." ::= { cpqSmCntlr 8 } cpqSmCntlrOsId OBJECT-TYPE SYNTAX INTEGER { other(1), netware286(177), netware386(178), os2LanManager(179), unix(180), banyan(181), dos(182) } ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Operating System ID. The host operating system registered by the driver with the Server Manager board." ::= { cpqSmCntlr 9 } cpqSmCntlrOsMajorRev OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Operating System Major Revision. The major revision of the host operating system registered by the driver with the Server Manager board." ::= { cpqSmCntlr 10 } cpqSmCntlrOsMinorRev OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Operating System Minor Revision. The minor revision of the host operating system registered by the driver with the Server Manager board." ::= { cpqSmCntlr 11 } cpqSmCntlrPostTimeout OBJECT-TYPE SYNTAX INTEGER (0..60) ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Power On Self Test Timeout. The number of minutes the board should wait for POST to complete. A value of 0 indicates that the version of firmware on the Server Manager board does not make this information available." ::= { cpqSmCntlr 12 } cpqSmCntlrCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Condition. This represents the overall condition of the Server Manager board." ::= { cpqSmCntlr 13 } -- **************************************************************************** -- Server Manager Object Data Group -- ================================ -- -- The compaq enterprise (232) -- cpqServerManager Group (232.4) -- cpqSmComponent Group (232.4.2) -- cpqSmObjData Group (232.4.2.3) -- -- The cpqSmObjData group contains lists and describes the objects and -- monitored items on the Server Manager board. The cpqSmObjData group -- also provides some information about the Server Manager board's -- object management resource utilization. -- -- Implementation of the cpqSmObjData group is mandatory for all agents -- that support the Compaq Server Manager MIB. -- -- **************************************************************************** cpqSmObjDataTotalObjects OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Total Objects. The total number of objects currently defined on the Server Manager Board." ::= { cpqSmObjData 1 } cpqSmObjDataObjectTotalSpace OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Total Object Space. The total amount of memory on the Server Manager board for storing object and monitored item information. This number is given in Server Manager board specific unit type and is best used in comparison with the objDataObjectSpaceAvailable." ::= { cpqSmObjData 2 } cpqSmObjDataObjectSpaceAvailable OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Available Object Space. The amount of memory currently available on the Server Manager board for storing object and monitored item information. This number is given in a Server Manager board specific unit type and is best used in comparison with the objDataObjectTotalSpace." ::= { cpqSmObjData 3 } cpqSmObjDataInnateMonitoringStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Server Manager Innate Monitoring Status. The following values are valid: Enabled (3) Innate Monitoring is active. Disabled (2) Innate Monitoring is not active. Other (1) Innate Monitoring status is unobtainable Innate Monitoring is performed by the Server Manager board without input from the operating system. It includes monitoring of information such as Temperature, Input/Output Check, and Power. Compaq DIAGNOSTICS disables Innate Monitoring before executing any tests so that alerts are not caused inadvertently. After completion, Diagnostics re-enables alerting." ::= { cpqSmObjData 4 } -- **************************************************************************** -- Server Manager Object Data Table -- ================================ -- -- The compaq enterprise (232) -- cpqServerManager Group (232.4) -- cpqSmComponent Group (232.4.2) -- cpqSmObjData Group (232.4.2.3) -- cpqSmObjectTable (232.4.2.3.1) -- -- **************************************************************************** cpqSmObjectTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqSmObjectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of the objects currently defined on the Server Manager board." ::= { cpqSmObjData 5 } cpqSmObjectEntry OBJECT-TYPE SYNTAX CpqSmObjectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A description of an object currently defined on the Server Manager board." INDEX { cpqSmObjectIndex, cpqSmObjectInstIndex } ::= { cpqSmObjectTable 1 } CpqSmObjectEntry ::= SEQUENCE { cpqSmObjectIndex INTEGER, cpqSmObjectInstIndex INTEGER, cpqSmObjectClass INTEGER, cpqSmObjectLabel DisplayString } cpqSmObjectIndex OBJECT-TYPE SYNTAX INTEGER (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This is a number that uniquely specifies a type of object on the Server Manager board." ::= { cpqSmObjectEntry 1 } cpqSmObjectInstIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This number uniquely specifies a particular instance of an object on the Server Manager board." ::= { cpqSmObjectEntry 2 } cpqSmObjectClass OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number used to group associated objects together by the type of function they perform. The currently defined classes are: 4096 (1000 hex) System Board 8192 (2000 hex) Disk Storage 16384 (4000 hex) Tape Storage 20480 (5000 hex) Network 24576 (6000 hex) NetWare 28672 (7000 hex) SCO UNIX 32768 (8000 hex) OS/2 LAN Manager 36864 (9000 hex) Banyan VINES" ::= { cpqSmObjectEntry 3 } cpqSmObjectLabel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A short text description of the object." ::= { cpqSmObjectEntry 4 } -- **************************************************************************** -- Server Manager Monitored Item Table -- =================================== -- -- The compaq enterprise (232) -- cpqServerManager Group (232.4) -- cpqSmComponent Group (232.4.2) -- cpqSmObjData Group (232.4.2.3) -- cpqSmMonItemTable (232.4.2.3.6) -- -- **************************************************************************** cpqSmMonItemTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqSmMonItemEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of the monitored items currently defined on the Server Manager board." ::= { cpqSmObjData 6 } cpqSmMonItemEntry OBJECT-TYPE SYNTAX CpqSmMonItemEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A description of a monitored item currently defined on the Server Manager board." INDEX { cpqSmMonItemObjIndex, cpqSmMonItemInstIndex, cpqSmMonItemIndex } ::= { cpqSmMonItemTable 1 } CpqSmMonItemEntry ::= SEQUENCE { cpqSmMonItemObjIndex INTEGER, cpqSmMonItemInstIndex INTEGER, cpqSmMonItemIndex INTEGER, cpqSmMonItemOnNetAlertStatus INTEGER, cpqSmMonItemRemoteAlertStatus INTEGER, cpqSmMonItemInnateStatus INTEGER, cpqSmMonItemHostNotify INTEGER, cpqSmMonItemLogicalOperator INTEGER, cpqSmMonItemSeverity INTEGER, cpqSmMonItemDataType INTEGER, cpqSmMonItemVoiceMsgNum INTEGER, cpqSmMonItemLabel DisplayString, cpqSmMonItemLimit INTEGER, cpqSmMonItemOptional INTEGER, cpqSmMonItemDefVal INTEGER, cpqSmMonItemCurVal INTEGER, cpqSmMonItemCurString DisplayString, cpqSmMonItemCurContents OCTET STRING, cpqSmMonItemTimeStamp OCTET STRING } cpqSmMonItemObjIndex OBJECT-TYPE SYNTAX INTEGER (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This number uniquely specifies a type of object on the Server Manager board with which this monitored item is associated." ::= { cpqSmMonItemEntry 1 } cpqSmMonItemInstIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This number uniquely specifies a particular instance of an object on the Server Manager board that with which this monitored item is associated." ::= { cpqSmMonItemEntry 2 } cpqSmMonItemIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This number specifies the monitored item of the object and instance given in the first two fields that this entry describes." ::= { cpqSmMonItemEntry 3 } cpqSmMonItemOnNetAlertStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates if the driver will be notified when this monitored item crosses a defined threshold. The driver may provide some mechanism for logging the event or notifying specified users. This field is undefined if the monItemDataType is string, data, or queue." ::= { cpqSmMonItemEntry 4 } cpqSmMonItemRemoteAlertStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates if the Server Manager board will notify pagers, telephones, or Server Manager Facilities when this monitored item crosses a defined threshold. This field is undefined if the monItemDataType is string, data, or queue." ::= { cpqSmMonItemEntry 5 } cpqSmMonItemInnateStatus OBJECT-TYPE SYNTAX INTEGER { other(1), externallyManaged(2), innate(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates if the Server Manager board is responsible for monitoring the value of this monitored item or if an external operating system agent is acquiring the value and placing the data on the Server Manager board." ::= { cpqSmMonItemEntry 6 } cpqSmMonItemHostNotify OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicate if the operating system driver is to be notified of modifications to this monitored item's thresholds." ::= { cpqSmMonItemEntry 7 } cpqSmMonItemLogicalOperator OBJECT-TYPE SYNTAX INTEGER { other(1), equal(2), notEqual(3), lessThan(4), greaterThan(5), lessThanOrEqual(6), greaterThanOrEqual(7), inside(8), outside(9) } ACCESS read-only STATUS mandatory DESCRIPTION "This shows the logical operation that is done with the limit (and optional) to determine if an alerting event has occured. This field is undefined if the monItemDataType is string, data, or queue." ::= { cpqSmMonItemEntry 8 } cpqSmMonItemSeverity OBJECT-TYPE SYNTAX INTEGER { other(1), status(2), warning(3), critical(4), catastrophic(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The severity of a problem with this monitored item. This field is undefined if the monItemDataType is string, data, or queue." ::= { cpqSmMonItemEntry 9 } cpqSmMonItemDataType OBJECT-TYPE SYNTAX INTEGER { other(1), counter(2), state(3), range(4), string(5), data(6), queue(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The conceptual type of data of this monitored item." ::= { cpqSmMonItemEntry 10 } cpqSmMonItemVoiceMsgNum OBJECT-TYPE SYNTAX INTEGER (0..511) ACCESS read-only STATUS mandatory DESCRIPTION "The voice message number that would be delivered as part of a voice alert when this monitored item exceeds its threshold. This field is undefined if the monItemDataType is string, data, or queue." ::= { cpqSmMonItemEntry 11 } cpqSmMonItemLabel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A short text description of the monitored item." ::= { cpqSmMonItemEntry 12 } cpqSmMonItemLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Threshold information for this monitored item. The interpretation of this field depends on the monItemDataType field. For counters this is the value that when passed, as specified by the comparator, an alert will occur. The optional can be used to specify a step. Whenever the value of the monitored item passes the value of the limit plus an integer multiple of the step a new alert will occur. For states this is the value that when passed, as specified by the comparator, an alert will occur. For ranges this value (the low threshold) and the value of the optional (the high threshold) define a range. When the range boundaries are crossed, as specified by the comparator, an alert will occur. This field is undefined if the monItemDataType is string, data, or queue." ::= { cpqSmMonItemEntry 13 } cpqSmMonItemOptional OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Threshold information for this monitored item. The interpretation of this field depends on the monItemDataType field. For counters this is the step. Whenever the value of the monitored item passes the value of the limit plus an integer multiple of the step a new alert will occur. For ranges this value (the high threshold) and the value of the limit (the low threshold) define a range. When the range boundaries are crossed, as specified by the comparator, an alert will occur. This field is undefined if the monItemDataType is state, string, data, or queue." ::= { cpqSmMonItemEntry 14 } cpqSmMonItemDefVal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Default value information for this monitored item. Certain Server Manager data types support a reset function. This field specifies the value that the monitored item will change to when a reset command is received. This field is only valid if the monItemDataType value is counter, state, or range. This field is undefined if the monItemDataType is string, data, or queue." ::= { cpqSmMonItemEntry 15 } cpqSmMonItemCurVal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of the monitored item if the monitored item's data type is counter, state, or range. If the monitored item's data type is string, data, or queue this value is undefined." ::= { cpqSmMonItemEntry 16 } cpqSmMonItemCurString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The value of the monitored item if the monItemDataType is string. If the monItemDataType is counter, state, range, data, or queue this value is undefined." ::= { cpqSmMonItemEntry 17 } cpqSmMonItemCurContents OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "The value of the monitored item if the monItemDataType is data or queue. If the monItemDataType is counter, state, range, or string this value is undefined. If the monItemDataType is data this field will contain a length octet (byte) followed by a number of octets of data equal to the value of the length octet. If the monItemDataType is queue this field will contain a head of queue octet followed by 255 octets of data. The value of the head of queue octet indicates the data octet that is the logical head of the circular queue of data." ::= { cpqSmMonItemEntry 18 } cpqSmMonItemTimeStamp OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "An octet string specifying the time of the last change of this monitored item. This octet string contains in the following order: year, month, day of month, hour, minute, second. Each of the octets is a Binary Coded Decimal (BCD) number." ::= { cpqSmMonItemEntry 19 } -- **************************************************************************** -- Server Manager Asynchronous Communications Group -- ================================================ -- -- The compaq enterprise (232) -- cpqServerManager Group (232.4) -- cpqSmComponent Group (232.4.2) -- cpqSmAsyncComm Group (232.4.2.4) -- -- The cpqSmAsyncComm group describes the configuration and status of -- the Server Manager board's asynchronous communication ports. -- -- Implementation of the cpqSmAsyncComm group is mandatory for all -- agents that support the Compaq Server Manager MIB. -- -- **************************************************************************** cpqSmCommAsyncCommunicationStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Async Status. This shows if asynchronous communication with the Server Manager's serial interface and modem is enabled (3) or disabled (2). This feature can be enabled or disabled through the Collection Agent User Interface (CPQCAUI.NLM). You may want to disable the Async Communication with the Server Manager to prevent a Server Manager Facility (SMF) user from assuming control of the system console. Disabling the Async Communication disconnects any active SMF session. Disabling the Async Communications also disables all remote alerts. Server Manager On-the-Network alerts will remain enabled. On-the-Network alerts are those sent over the network." ::= { cpqSmAsyncComm 1 } cpqSmCommInternalModemMaxBaudRate OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The value specifies the maximum baud rate supported by the modem installed on the Server Manager board. A value of 0 indicates that the version of firmware on the Server Manager board does not make this information available." ::= { cpqSmAsyncComm 2 } cpqSmCommAudibleIndicatorStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current status of the remote console audible indicator. When enabled, the server will beep when the Server Manager is being used by a Server Manager Facility for remote session emulation." ::= { cpqSmAsyncComm 3 } cpqSmCommRemoteSessionStatus OBJECT-TYPE SYNTAX INTEGER { other(1), notSupported(2), noSessionActive(3), remoteSessionActive(4), pgrVoiceSessionActive(5), remoteConsoleActive(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The current value of the remote session activity. A value of notSupported indicates that the version of firmware on the Server Manager board does not make this information available." ::= { cpqSmAsyncComm 4 } cpqSmCommCallbackStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the call back feature of the Server Manager board." ::= { cpqSmAsyncComm 5 } -- **************************************************************************** -- Server Manager Modem Setting Table -- ================================== -- -- The compaq enterprise (232) -- cpqServerManager Group (232.4) -- cpqSmComponent Group (232.4.2) -- cpqSmAsyncComm Group (232.4.2.4) -- cpqSmModemSettingsTable (232.4.2.4.6) -- -- **************************************************************************** cpqSmModemSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqSmModemSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of defined modem settings for the Server Manager board." ::= { cpqSmAsyncComm 6 } cpqSmModemSettingsEntry OBJECT-TYPE SYNTAX CpqSmModemSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A defined modem's settings for the Server Manager board." INDEX { cpqSmModemSettingsIndex } ::= { cpqSmModemSettingsTable 1 } CpqSmModemSettingsEntry ::= SEQUENCE { cpqSmModemSettingsIndex INTEGER, cpqSmModemSettingsStatus INTEGER, cpqSmModemSettingsBaudRate INTEGER, cpqSmModemSettingsParity INTEGER, cpqSmModemSettingsDataLength INTEGER, cpqSmModemSettingsStopBits INTEGER, cpqSmModemSettingsDialString DisplayString, cpqSmModemSettingsHangUpString DisplayString, cpqSmModemSettingsAnswerString DisplayString, cpqSmModemSettingsOriginateString DisplayString } cpqSmModemSettingsIndex OBJECT-TYPE SYNTAX INTEGER { internalModem(48), externalModem(49), pager(50) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of modem settings this entry describes." ::= { cpqSmModemSettingsEntry 1 } cpqSmModemSettingsStatus OBJECT-TYPE SYNTAX INTEGER { other(1), noInternalModem(2), internalUSModem(3), internalIntnlModem(4), serialPortNotSetup(5), serialDirectConnect(6), serialExternalModem(7), pagerInformationData(8) } ACCESS read-only STATUS mandatory DESCRIPTION "Status information about the modem described by this table entry. Only some of these values are appropriate for some types of entries." ::= { cpqSmModemSettingsEntry 2 } cpqSmModemSettingsBaudRate OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The baud rate to be used over this communcation medium by the Server Manager board." ::= { cpqSmModemSettingsEntry 3 } cpqSmModemSettingsParity OBJECT-TYPE SYNTAX INTEGER { other(1), none(2), odd(3), even(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The parity used for this communication medium by the Server Manager board." ::= { cpqSmModemSettingsEntry 4 } cpqSmModemSettingsDataLength OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The data length used for this communication medium by the Server Manager board." ::= { cpqSmModemSettingsEntry 5 } cpqSmModemSettingsStopBits OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "The number of stop bits used for this communication medium by the Server Manager board." ::= { cpqSmModemSettingsEntry 6 } cpqSmModemSettingsDialString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "The string that is entered before any dial operation by the Server Manager board." ::= { cpqSmModemSettingsEntry 7 } cpqSmModemSettingsHangUpString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "The string used to hang up the phone by the Server Manager board." ::= { cpqSmModemSettingsEntry 8 } cpqSmModemSettingsAnswerString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "The string used to put the modem into auto-answer mode by the Server Manager board." ::= { cpqSmModemSettingsEntry 9 } cpqSmModemSettingsOriginateString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "The string used to put the modem into originate mode by the Server Manager board." ::= { cpqSmModemSettingsEntry 10 } -- **************************************************************************** -- Server Manager Alert Group -- ========================== -- -- The compaq enterprise (232) -- cpqServerManager Group (232.4) -- cpqSmComponent Group (232.4.2) -- cpqSmAlert Group (232.4.2.5) -- -- The cpqSmAlert group describes the configuration and status and the -- Server Manager board's alerting system. -- -- Implementation of the cpqSmAlert group is mandatory for all agents -- that support the Compaq Server Manager MIB. -- -- **************************************************************************** cpqSmAlertStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current alerting status." ::= { cpqSmAlert 1 } -- **************************************************************************** -- Server Manager Alert Destination Table -- ====================================== -- -- The compaq enterprise (232) -- cpqServerManager Group (232.4) -- cpqSmComponent Group (232.4.2) -- cpqSmAlert Group (232.4.2.5) -- cpqSmAlertDestTable (232.4.2.5.2) -- -- **************************************************************************** cpqSmAlertDestTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqSmAlertDestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of currently defined alert destinations on the Server Manager board." ::= { cpqSmAlert 2 } cpqSmAlertDestEntry OBJECT-TYPE SYNTAX CpqSmAlertDestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A currently defined alert destination on the Server Manager board." INDEX { cpqSmAlertDestPriorityIndex } ::= { cpqSmAlertDestTable 1 } CpqSmAlertDestEntry ::= SEQUENCE { cpqSmAlertDestPriorityIndex INTEGER, cpqSmAlertDestType INTEGER, cpqSmAlertDestRetries INTEGER, cpqSmAlertDestConnectFlags INTEGER, cpqSmAlertDestPhoneNumber DisplayString, cpqSmAlertDestTimeMask OCTET STRING, cpqSmAlertDestPagerType INTEGER, cpqSmAlertDestPagerId DisplayString, cpqSmAlertDestPagerDisplayLength INTEGER } cpqSmAlertDestPriorityIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This is a number that uniquely specifies this alert destination. This number is also the priority of the alert destination. When an alert occurs, alert destinations are tried in an order based on their priority (lowest number first). The priority index is one based, meaning index one (1) is the highest priority index (and tried first), index two (2) is next, and so forth." ::= { cpqSmAlertDestEntry 1 } cpqSmAlertDestType OBJECT-TYPE SYNTAX INTEGER { other(1), internalModemToSmf(161), internalModemToPager(162), internalModemToVoice(163), externalModemToSmf(164), externalModemToPager(165), externalDirectToSmf(166) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of connection appropriate for the destination." ::= { cpqSmAlertDestEntry 2 } cpqSmAlertDestRetries OBJECT-TYPE SYNTAX INTEGER (0..31) ACCESS read-only STATUS mandatory DESCRIPTION "The number of retries for a successful connection that should be attempted to this alert destination." ::= { cpqSmAlertDestEntry 3 } cpqSmAlertDestConnectFlags OBJECT-TYPE SYNTAX INTEGER { other(1), alertOnly(2), callbackOnly(3), alertAndCallback(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type(s) of communication that this destination supports." ::= { cpqSmAlertDestEntry 4 } cpqSmAlertDestPhoneNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "The phone number for this destination. This field is undefined if the alertDestType is externalDirectToSmf." ::= { cpqSmAlertDestEntry 5 } cpqSmAlertDestTimeMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (21)) ACCESS read-only STATUS mandatory DESCRIPTION "A set of bit flags specifying the times this is a valid destination. Each bit specifies whether it this is a valid destination for a specific hour of the week. The first bit is for the hour 12:00:01 am to 1:00:00 am on Monday. Each bit thereafter specifies the validity of this destination for the next hour." ::= { cpqSmAlertDestEntry 6 } cpqSmAlertDestPagerType OBJECT-TYPE SYNTAX INTEGER { other(1), numericOnly(2), alphanumeric(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of pager at this destination. This field is undefined if the alertDestType is internalModemToSmf, internalModemToVoice, externalModemToSmf, or externalDirectToSmf." ::= { cpqSmAlertDestEntry 7 } cpqSmAlertDestPagerId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The pager ID assigned by the paging company to identify the pager. This field is undefined if the alertDestType is internalModemToSmf, internalModemToVoice, externalModemToSmf, or externalDirectToSmf." ::= { cpqSmAlertDestEntry 8 } cpqSmAlertDestPagerDisplayLength OBJECT-TYPE SYNTAX INTEGER (0..80) ACCESS read-only STATUS mandatory DESCRIPTION "The size of the pager display. This field is undefined if the alertDestType is internalModemToSmf, internalModemToVoice, externalModemToSmf, or externalDirectToSmf." ::= { cpqSmAlertDestEntry 9 } -- **************************************************************************** -- Server Manager Trap Group -- ========================= -- -- The compaq enterprise (232) -- cpqServerManager Group (232.4) -- cpqSmTrap Group (232.4.3) -- -- The cpqSmTrap group maintains information about the number of traps -- issued from the cpqServerManager enterprise. The cpqSmTrap group -- also maintains a table of the last several traps issued. This table -- is intended to give a management application some recent status -- information immediately upon accessing the agent. -- -- Implementation of the cpqSmTrap group is optional for agents that -- support the Compaq Server Manager MIB. -- -- **************************************************************************** cpqSmTrapPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of trap packets issued by the agent for the cpqSmServerManager enterprise since the Server Manager SNMP agent was loaded." ::= { cpqSmTrap 1 } cpqSmTrapLogMaxSize OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of entries that will currently be kept in the trap log. If the maximum size has been reached and a new trap occurs the oldest trap will be removed." ::= { cpqSmTrap 2 } -- **************************************************************************** -- Server Manager Trap Log Table -- ============================= -- -- The compaq enterprise (232) -- cpqServerManager Group (232.4) -- cpqSmTrap Group (232.4.3) -- cpqSmTrapLogTable (232.4.3.3) -- -- **************************************************************************** cpqSmTrapLogTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqSmTrapLogEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An ordered list of trap log entries (conceptually a queue). The trap log entries will be kept in the order in which they were generated with the most recent trap at index 1 and the oldest trap entry at index trapLogMaxSize. If the maximum number size has been reached and a new trap occurs the oldest trap will be removed when the new trap is added so the trapMaxLogSize is not exceeded." ::= { cpqSmTrap 3 } cpqSmTrapLogEntry OBJECT-TYPE SYNTAX CpqSmTrapLogEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A description of a trap event." INDEX { cpqSmTrapLogIndex } ::= { cpqSmTrapLogTable 1 } CpqSmTrapLogEntry ::= SEQUENCE { cpqSmTrapLogIndex INTEGER, cpqSmTrapType INTEGER, cpqSmTrapTime OCTET STRING } cpqSmTrapLogIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object uniquely identifies this trapLogEntry at this time. The most recent trap will have an index of 1 and the oldest trap will have an index of trapLogMaxSize. Because of the queue-like nature of the trapLog this particular trap event's index will change as new traps are issued." ::= { cpqSmTrapLogEntry 1 } cpqSmTrapType OBJECT-TYPE SYNTAX INTEGER { cpqSmBoardFailed(1), cpqSmBoardReset(2), cpqSmServerManagerAlert(3), cpqSmCommFailed(4), cpqSmBatteryFailed(5), cpqSmBoardTimeout(6), cpqSmAlertDestinationBlacklisted(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the trap event that this entry describes. This number refers to an entry in a list of traps enumerating the possible traps the Server Manager agent may issue." ::= { cpqSmTrapLogEntry 2 } cpqSmTrapTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The time of the trap event that this entry describes. The time is given in year (first octet), month, day of month, hour, minute, second (last octet) order. Each octet is a BCD number." ::= { cpqSmTrapLogEntry 3 } -- **************************************************************************** -- Server Manager Trap Definition -- ============================== -- -- Server Manager Trap Definitions -- NOTE: Server Manager Trap Definitions are based on the -- cpqServerManager enterprise. -- -- Trap support in an SNMP agent implementation is optional. An SNMP -- agent implementation may support all, some, or none of the traps. -- -- **************************************************************************** cpqSmBoardFailed TRAP-TYPE ENTERPRISE cpqServerManager DESCRIPTION "Server Manager board failure. The Insight Agent has detected a failure of the Compaq Server Manager/R board in the server." --#TYPE "Server Manager/R Board Failed" --#SUMMARY "Server Manager/R board failure detected." --#ARGUMENTS {} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE DEGRADED ::= 1 cpqSmBoardReset TRAP-TYPE ENTERPRISE cpqServerManager DESCRIPTION "Server Manager board reset. The Insight Agent has detected a reset of the Server Manager/R board in the server." --#TYPE "Server Manager/R Board Reset" --#SUMMARY "Server Manager/R board has been reset." --#ARGUMENTS {} --#SEVERITY MINOR --#TIMEINDEX 99 --#STATE DEGRADED ::= 2 cpqSmServerManagerAlert TRAP-TYPE ENTERPRISE cpqServerManager VARIABLES { cpqSmMonItemCurVal , cpqSmObjectLabel, cpqSmMonItemLabel , cpqSmMonItemDataType , cpqSmMonItemSeverity , cpqSmMonItemLimit , cpqSmMonItemOptional , cpqSmMonItemLogicalOperator , cpqSmMonItemTimeStamp } DESCRIPTION "Threshold exeeded on Server Manager monitored item. The Insight Agent has detected a monitored item on the Server Manager board exceeding a threshold when alerting is enabled for the monitored item." --#TYPE "Server Manager/R Threshhold Exceeded" --#SUMMARY "The %s - %s = %d." --#ARGUMENTS {1,2,0} --#SEVERITY CRITICAL --#TIMEINDEX 99 ::= 3 cpqSmCommFailed TRAP-TYPE ENTERPRISE cpqServerManager DESCRIPTION "Server Manager asynchronous communications failure. The Insight Agent has detected a failure in the Server Manager board's asynchronous communication system." --#TYPE "Async Comm Failure" --#SUMMARY "Async comm failure on Server Manager/R Board." --#ARGUMENTS {} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE DEGRADED ::= 4 cpqSmBatteryFailed TRAP-TYPE ENTERPRISE cpqServerManager DESCRIPTION "Server Manager battery failure. The Insight Agent has detected a failure in the Server Manager board's onboard battery." --#TYPE "Battery Failure" --#SUMMARY "Server Manager/R battery has failed." --#ARGUMENTS {} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED ::= 5 cpqSmBoardTimeout TRAP-TYPE ENTERPRISE cpqServerManager DESCRIPTION "Server Manager board time-out. The Insight Agent has detected a time-out of the Server Manager board as reported by the Server Manager Board driver." --#TYPE "Board Timeout" --#SUMMARY "Server Manager/R board is not responding." --#ARGUMENTS {} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE DEGRADED ::= 6 cpqSmAlertDestinationBlacklisted TRAP-TYPE ENTERPRISE cpqServerManager VARIABLES { cpqSmAlertDestType, cpqSmAlertDestPhoneNumber, cpqSmAlertDestPagerId } DESCRIPTION "Alert destination blacklisted. The Server Manager board modem has blacklisted an alert destination phone number. Once blacklisted, that alert destination is no longer available for use as an alert destination. Blacklisting, which only occurs in international modems, is a requirement imposed by certain European countries on modems, to prevent a phone number from being dialed multiple times without getting a connection. The number of attempts required to have blacklisting occur, vary from country to country. Once an alert destination has been blacklisted, the only way to remove the blacklisted phone number is to remove power from the modem. On external modems this is a trival task. When a blacklisting occurs on the Server Manager board's internal modem the task is slightly more difficult as the modem gets power from the Server Manager board. To remove power from the Server Manager board's internal modem, the Server Manager board must be forced into Dormant Mode. This is an operating mode, used to conserve battery life, which is entered automatically if the board looses power. To cause the board to enter Dormant Mode, the following steps should be performed: 1) Disable alerting via CPQCAUI.NLM. 2) Disable async communication via CPQCAUI.NLM. 3) Down the server. 4) Exit to DOS (if applicable). 5) Shut power off to the computer. 6) Wait 5 minutes before restoring power. Once the 5 minutes has expired, and power to the computer has been restored, the modem will have flushed its blacklist, and the board's alerting functions will work as expected." --#TYPE "Alert Destination Blacklisted" --#SUMMARY "Phone# %s, Pager ID %s blacklisted." --#ARGUMENTS {1,2} --#SEVERITY MINOR --#TIMEINDEX 99 --#STATE DEGRADED ::= 7 END