CT-CMMPHYS-MIB device MIB details by Enterasys Networks Inc
CT-CMMPHYS-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CT-CMMPHYS-MIB.
| Vendor: | Enterasys Networks Inc |
|---|---|
| Mib: | CT-CMMPHYS-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
CT-CMMPHYS-MIB DEFINITIONS ::= BEGIN -- ct-cmmphys-mib.txt -- Revision: 01.00.00 -- Part Number: -- Date: December 16, 1998 -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides an enterprise-specific CMM container MIB. -- -- This module will be extended, as needed. -- -- Goals and Philosophy -- -- The purpose of this MIB is to provide a central repository of all -- information pertaining to the configuration, operation, status, -- and health of a CMM board and its CMM modules. The goal of these -- values is to facilitate troubleshooting problems at the level of -- a CMM board or CMM module. The intended audience for this -- information includes customers, field engineers, and developers. -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright December 98 Cabletron Systems IMPORTS OBJECT-TYPE FROM RFC-1212 DisplayString,ifIndex FROM RFC1213-MIB IpAddress,Counter,Gauge FROM RFC1155-SMI ctCMM FROM CTRON-MIB-NAMES mBusBoardID FROM CT-HSIMPHYS-MIB; --=============== Group Definitions =================== -- This is just a dummy value to get this to compile correctly for now. cmmModemInfo OBJECT IDENTIFIER ::= { ctCMM 1 } --================================================================ -- This MIB module uses the extended OBJECT-TYPE macro as defined -- RFC 1212 --================= CMM Board-Level Info =================== cmmBoardTable OBJECT-TYPE SYNTAX SEQUENCE OF CmmBoardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of CMM boards present in this unit." ::= { cmmModemInfo 1 } cmmBoardEntry OBJECT-TYPE SYNTAX CmmBoardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A CMM board present in this unit." INDEX { mBusBoardID } ::= { cmmBoardTable 1 } CmmBoardEntry ::= SEQUENCE { cmmBoardType OBJECT IDENTIFIER, cmmNumModules INTEGER, cmmModuleNumModems INTEGER, cmmTFTPServer IpAddress, cmmUpgradePath DisplayString, cmmUpgradeFlag INTEGER, cmmCommitFlag INTEGER, cmmModemResetLimit INTEGER, cmmModemResetTime INTEGER, cmmOutgoingInactivityTimeout INTEGER, cmmIncomingInactivityTimeout INTEGER, cmmAsyncBaseOrigATCmdStr DisplayString, cmmAsyncBaseAnswerATCmdStr DisplayString, cmmAsyncOrigStrModifier DisplayString, cmmAsyncAnswerStrModifier DisplayString, cmmAsyncOperOrigATCmdStr DisplayString, cmmAsyncOperAnswerATCmdStr DisplayString, cmmHdlcBaseOrigATCmdStr DisplayString, cmmHdlcBaseAnswerATCmdStr DisplayString, cmmHdlcOrigStrModifier DisplayString, cmmHdlcAnswerStrModifier DisplayString, cmmHdlcOperOrigATCmdStr DisplayString, cmmHdlcOperAnswerATCmdStr DisplayString, cmmBoardAdminStatus INTEGER, cmmBoardOperStatus INTEGER } cmmBoardType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object uniquely defines the CMM board type - a vendor's authoritative identification for a module. By convention, this value is allocated within the SMI enterprises subtree(1.3.6.1.4.1), and provides an easy and unambiguous means for determining the type of board." ::= { cmmBoardEntry 1 } cmmNumModules OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the number of CMM modules contained on this physical CMM circuit board." ::= { cmmBoardEntry 2 } cmmModuleNumModems OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of modems per CMM module." ::= { cmmBoardEntry 3 } cmmTFTPServer OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the IP address of the TFTP server where the object code for CMM modules resides. This object is persistent." ::= { cmmBoardEntry 4 } cmmUpgradePath OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the path to the object code for CMM modules on the TFTP server. This object is persistent." ::= { cmmBoardEntry 5 } cmmUpgradeFlag OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is a flag that indicates whether or not to upgrade the software for the CMM modules on the board. This object is persistent." ::= { cmmBoardEntry 6 } cmmCommitFlag OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is a flag that indicates whether or not to commit the software for the CMM modules on the board. This object is persistent." ::= { cmmBoardEntry 7 } cmmModemResetLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the number of times that a modem can be reset within a given time span before it is declared to be faulty. If the value is 0 then the modem will never be declared faulty. This object is persistent." ::= { cmmBoardEntry 8 } cmmModemResetTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the time span (in minutes) during which the given number of resets must occur before the modem is declared to be faulty. This object is persistent." ::= { cmmBoardEntry 9 } cmmOutgoingInactivityTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the duration (in seconds) of a period of inactivity before an outgoing call is terminated. This object is persistent." ::= { cmmBoardEntry 10 } cmmIncomingInactivityTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the duration (in seconds) of a period of inactivity before an incoming call is terminated. This object is persistent." ::= { cmmBoardEntry 11 } cmmAsyncBaseOrigATCmdStr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the default or base set of AT commands to be used when originating an async call." ::= { cmmBoardEntry 12 } cmmAsyncBaseAnswerATCmdStr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the default or base set of AT commands to be used when answering an async call." ::= { cmmBoardEntry 13 } cmmAsyncOrigStrModifier OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is a set of additional AT commands to be used when originating an async call. This object is persistent." ::= { cmmBoardEntry 14 } cmmAsyncAnswerStrModifier OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is a set of additional AT commands to be used when answering an async call. This object is persistent." ::= { cmmBoardEntry 15 } cmmAsyncOperOrigATCmdStr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the operative set of AT commands to be used when originating an async call. It includes the base string, the modifier string, and the call timeout value." ::= { cmmBoardEntry 16 } cmmAsyncOperAnswerATCmdStr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the operative set of AT commands to be used when answering an async call. It includes the base string, the modifier string, and the call timeout value." ::= { cmmBoardEntry 17 } cmmHdlcBaseOrigATCmdStr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the default or base set of AT commands to be used when originating an HDLC call." ::= { cmmBoardEntry 18 } cmmHdlcBaseAnswerATCmdStr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the default or base set of AT commands to be used when answering an HDLC call." ::= { cmmBoardEntry 19 } cmmHdlcOrigStrModifier OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is a set of additional AT commands to be used when originating an HDLC call. This object is persistent." ::= { cmmBoardEntry 20 } cmmHdlcAnswerStrModifier OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is a set of additional AT commands to be used when answering an HDLC call. This object is persistent." ::= { cmmBoardEntry 21 } cmmHdlcOperOrigATCmdStr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the operative set of AT commands to be used when originating an HDLC call. It includes the base string, the modifier string, and the call timeout value." ::= { cmmBoardEntry 22 } cmmHdlcOperAnswerATCmdStr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the operative set of AT commands to be used when answering an HDLC call. It includes the base string, the modifier string, and the call timeout value." ::= { cmmBoardEntry 23 } cmmBoardAdminStatus OBJECT-TYPE SYNTAX INTEGER { down(1), leave-service(2), up(3), upgrade(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the administrative status of the CMM board. down(1) -- all modems that belong to this board are to be removed from service immediately leave-service(2) -- each modem that belongs to this board is to be removed from service at the completion of its current call, if any up(3) -- each modem that belongs to this module is to become available for accepting calls upgrade(4) -- all modules that belong to this board are to be reloaded with new software and restarted" ::= { cmmBoardEntry 24 } cmmBoardOperStatus OBJECT-TYPE SYNTAX INTEGER { initializing(1), active(2), leaving-service(3), out-of-service(4), faulty(5), impaired(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the operational status of the CMM board. initializing(1) -- all modules that belong to this board are booting up or in the process of a software upgrade active(2) -- all modules that belong to this board are available for accepting calls leaving-service(3) -- all modules that belong to this board are functional but are no longer available for accepting calls (Existing calls are allowed to terminate normally.) out-of-service(4) -- none of the modules that belong to this board are available for accepting calls nor do they have any existing calls faulty(5) -- all modules that belong to this board are unusable impaired(6) -- the board is otherwise active but one or more modules are in the out-of-service, initializing, testing, faulty, or impaired states" ::= { cmmBoardEntry 25 } --================= CMM Module-Level Info =================== cmmModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF CmmModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of CMM modules present on each CMM board in this unit" ::= { cmmModemInfo 2 } cmmModuleEntry OBJECT-TYPE SYNTAX CmmModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of this object is a CMM module that is present in this unit" INDEX { mBusBoardID, cmmModuleID } ::= { cmmModuleTable 1 } CmmModuleEntry ::= SEQUENCE { cmmModuleID INTEGER, cmmDpramSize INTEGER, cmmSdramSize INTEGER, cmmCpuType INTEGER, cmmCpuSpeed INTEGER, cmmCpuFwRev DisplayString, cmmEpldId DisplayString, cmmEpldRev DisplayString, cmmNumBadModems INTEGER, cmmModuleOperStatus INTEGER, cmmModuleAdminStatus INTEGER } cmmModuleID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is an index that uniquely identifies the CMM module within the physical CMM board." ::= { cmmModuleEntry 1 } cmmDpramSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Size of the DPRAM (in bytes) on the CMM module." ::= { cmmModuleEntry 2 } cmmSdramSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Size of the SDRAM (in bytes) on the CMM module." ::= { cmmModuleEntry 3 } cmmCpuType OBJECT-TYPE SYNTAX INTEGER { unknown(1), hitachish3(2), hitachish4(3) } ACCESS read-only STATUS mandatory DESCRIPTION "CPU type on the CMM module." ::= { cmmModuleEntry 4 } cmmCpuSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The speed of the CPU (in Megahertz) on the CMM module." ::= { cmmModuleEntry 5 } cmmCpuFwRev OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Revision of the CPU firmware on the CMM module. This code is a product of RSA." ::= { cmmModuleEntry 6 } cmmEpldId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "EPLD ID on the CMM module. (Read from the Altera chip.)" ::= { cmmModuleEntry 7 } cmmEpldRev OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Revision of the EPLD firmware on the CMM module. This code is produced by Cabletron." ::= { cmmModuleEntry 8 } cmmNumBadModems OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the number of bad modems on the CMM module." ::= { cmmModuleEntry 9 } cmmModuleAdminStatus OBJECT-TYPE SYNTAX INTEGER { down(1), leave-service(2), up(3), run-diagnostics(4), reset(5), faulty(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the administrative status of the CMM module. down(1) -- all modems that belong to this module are to be removed from service immediately leave-service(2) -- each modem that belongs to this module is to be removed from service at the completion of its current call, if any up(3) -- each modem that belongs to this module is to become available for accepting calls run-diagnostics(4) -- all modems that belong to this module are to run a series of comprehensive on-line diagnostic tests reset(5) -- the entire module is to be physically reset faulty(6) -- the entire module is to be immediately removed from service and considered unusable" ::= { cmmModuleEntry 10 } cmmModuleOperStatus OBJECT-TYPE SYNTAX INTEGER { initializing(1), active(2), leaving-service(3), out-of-service(4), faulty(5), impaired(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the operational status of the CMM module. initializing(1) -- the module is booting up or in the process of a software upgrade active(2) -- all modems that belong to this module are available for accepting calls leaving-service(3) -- all modems that belong to this module are functional but are no longer available for accepting calls (Existing calls are allowed to terminate normally.) out-of-service(4) -- none of the modems that belong to this module are available for accepting calls nor do they have any existing calls faulty(5) -- the module has been removed from service by an NMS and is considered to be unusable impaired(6) -- the module is otherwise active but one or more modems are in the out-of-service, initializing, testing, or faulty states" ::= { cmmModuleEntry 11 } --================= CMM Modem-Level Info =================== cmmModemTable OBJECT-TYPE SYNTAX SEQUENCE OF CmmModemEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of modems present on each CMM module on each CMM board in this unit" ::= { cmmModemInfo 3 } cmmModemEntry OBJECT-TYPE SYNTAX CmmModemEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object contains data for a single CMM modem." INDEX { ifIndex } ::= { cmmModemTable 1 } CmmModemEntry ::= SEQUENCE { cmmBoardID INTEGER, cmmModemID INTEGER, cmmIFNum INTEGER, cmmSessionNum INTEGER, cmmDdpPartNum DisplayString, cmmDdpRevLevel DisplayString, cmmDdpFwRev DisplayString, cmmDDPInterrupts Counter, cmmRxFlowCtlEvts Counter, cmmTxFlowCtlEvts Counter, cmmCallStatus INTEGER, cmmCallOrigin INTEGER, cmmRobbedBitDetected DisplayString, cmmCorrectionType INTEGER, cmmCompressionType INTEGER, cmmRxRate INTEGER, cmmTxRate INTEGER, cmmEncoding INTEGER, cmmFraming INTEGER, cmmInitialConnectRate INTEGER, cmmMaxHostWindows INTEGER, cmmMaxCmmWindows INTEGER, cmmNumOutHostAcks Gauge, cmmNumOutCmmAcks Gauge, cmmToNetworkOctets Counter, cmmFromNetworkOctets Counter, cmmToHostOctets Counter, cmmFromHostOctets Counter, cmmToNetworkFrames Counter, cmmFromNetworkFrames Counter, cmmOversizeFrames Counter, cmmOverrunErrors Counter, cmmCRCErrors Counter, cmmAbortedFrames Counter, cmmRetrainEvents Counter, cmmARAEvents Counter, cmmARAFlag INTEGER, cmmCarrierLossEvents Counter, cmmCarrierLossFlag INTEGER, cmmRcvSignalLevel INTEGER, cmmRcvSignalEQM INTEGER, cmmTDMSlot INTEGER, cmmResetModemStats INTEGER, cmmModemAdminStatus INTEGER, cmmModemOperStatus INTEGER } cmmBoardID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the logical number of the CMM board to which the modem belongs." ::= { cmmModemEntry 1 } cmmModemID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the logical number of the modem on the CMM module to which the modem belongs." ::= { cmmModemEntry 2 } cmmIFNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of the instance of the Interface MIB that is associated with this modem." ::= { cmmModemEntry 3 } cmmSessionNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the session number that is associated with this modem. Session numbers are assigned, starting with 1, from the first modem on the first module of the first CMM board and continuing through the last modem of the last module of the last CMM board." ::= { cmmModemEntry 4 } cmmDdpPartNum OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Part number of the DDP controller on the CMM module. (Read from the DDP chip.)" ::= { cmmModemEntry 5 } cmmDdpRevLevel OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Revision level of the DDP controller on the CMM module. (Read from the DDP chip.)" ::= { cmmModemEntry 6 } cmmDdpFwRev OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Revison of the DDP controller firmware on the CMM module. This code is produced by Rockwell." ::= { cmmModemEntry 7 } cmmDDPInterrupts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of interrupts received by the CMM transfer manager since initialization." ::= { cmmModemEntry 8 } cmmRxFlowCtlEvts OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the number of received flow control events." ::= { cmmModemEntry 9 } cmmTxFlowCtlEvts OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the number of transmitted flow control events." ::= { cmmModemEntry 10 } cmmCallStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), connected(2), retraining(3), dropping(4), local-test(5), remote-test(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the current call status." ::= { cmmModemEntry 11 } cmmCallOrigin OBJECT-TYPE SYNTAX INTEGER { answer(1), originate(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains an enumerated value that indicates whether the call originated locally or remotely." ::= { cmmModemEntry 12 } cmmRobbedBitDetected OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the robbed bit signalling pattern that was detected by the modem or 0 if none." ::= { cmmModemEntry 13 } cmmCorrectionType OBJECT-TYPE SYNTAX INTEGER { no-ec(1), detection(2), mnp(3), hanging-up(4), speed-matching(5), lapm(6), mnp10(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains an enumerated value that indicates the type of error correction that was negotiated." ::= { cmmModemEntry 14 } cmmCompressionType OBJECT-TYPE SYNTAX INTEGER { none(1), mnp-class-5(2), v42bis-tx-only(3), v42bis-rx-only(4), v42bis(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains an enumerated value that indicates the type of data compression that was negotiated." ::= { cmmModemEntry 15 } cmmRxRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the current receive rate." ::= { cmmModemEntry 16 } cmmTxRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the current transmit rate." ::= { cmmModemEntry 17 } cmmEncoding OBJECT-TYPE SYNTAX INTEGER { u-law(1), a-law(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the current PCM encoding type." ::= { cmmModemEntry 18 } cmmFraming OBJECT-TYPE SYNTAX INTEGER { pseudo-framing(1), hdlc-framing(2), ppp-async(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the current framing type." ::= { cmmModemEntry 19 } cmmInitialConnectRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the initial connect rate (in BPS) or the session." ::= { cmmModemEntry 20 } cmmMaxHostWindows OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the maximum number of host windows." ::= { cmmModemEntry 21 } cmmMaxCmmWindows OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the maximum number of CMM windows." ::= { cmmModemEntry 22 } cmmNumOutHostAcks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of host window acks that have not been processed by the CMM side." ::= { cmmModemEntry 23 } cmmNumOutCmmAcks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of CMM window acks that have not been processed by the host side." ::= { cmmModemEntry 24 } cmmToNetworkOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of data bytes transmitted (modem -> central office switch)." ::= { cmmModemEntry 25 } cmmFromNetworkOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of data bytes received (central office switch -> modem)." ::= { cmmModemEntry 26 } cmmToHostOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of data bytes transmitted (modem -> m-bus host)." ::= { cmmModemEntry 27 } cmmFromHostOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of data bytes received (m-bus host -> modem)." ::= { cmmModemEntry 28 } cmmToNetworkFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of frames transmitted (modem -> central office switch)." ::= { cmmModemEntry 29 } cmmFromNetworkFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of frames received (central office switch -> modem)." ::= { cmmModemEntry 30 } cmmOversizeFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of HDLC frames received that were greater than the maximum permissible size." ::= { cmmModemEntry 31 } cmmOverrunErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of HDLC overrun errors." ::= { cmmModemEntry 32 } cmmCRCErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of HDLC CRC errors." ::= { cmmModemEntry 33 } cmmAbortedFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of HDLC frames that were aborted while they were being received." ::= { cmmModemEntry 34 } cmmRetrainEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of times that retrain and renegotiation events have occurred since initialization." ::= { cmmModemEntry 35 } cmmARAEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of times that automatic rate adaption events have occurred." ::= { cmmModemEntry 36 } cmmARAFlag OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains a flag that indicates whether or not an ARA event has occurred during the current session." ::= { cmmModemEntry 37 } cmmCarrierLossEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of times that carrier loss events have occurred." ::= { cmmModemEntry 38 } cmmCarrierLossFlag OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains a flag that indicates whether or not a carrier loss event has occurred during the current session." ::= { cmmModemEntry 39 } cmmRcvSignalLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the receive signal level." ::= { cmmModemEntry 40 } cmmRcvSignalEQM OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the receive signal EQM." ::= { cmmModemEntry 41 } cmmTDMSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the number of the TDM slot used by this session." ::= { cmmModemEntry 42 } cmmResetModemStats OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to reset the statistics pertaining to the selected modem. If written with the value 'true', the statistics will be reset. If written with the value 'false', no action will be taken. Its value will always be read as 'false'." ::= { cmmModemEntry 43 } cmmModemAdminStatus OBJECT-TYPE SYNTAX INTEGER { down(1), leave-service(2), up(3), run-diagnostics(4), reset(5), faulty(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the administrative status of a modem. down(1) -- the modem is to be removed from service immediately leave-service(2) -- the modem is to be removed from service at the completion of its current call, if any up(3) -- the modem is to become available for accepting calls run-diagnostics(4) -- the modem is to run a series of comprehensive on-line diagnostic tests reset(5) -- the modem is to be physically reset faulty(6) -- the modem is to be immediately removed from service and considered unusable" ::= { cmmModemEntry 44 } cmmModemOperStatus OBJECT-TYPE SYNTAX INTEGER { initializing(1), idle(2), active(3), leaving-service(4), out-of-service(5), testing(6), faulty(7), resetting(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the operational status of a modem. initializing(1) -- the module to which the modem belongs is booting up or in the process of a software upgrade idle(2) -- the modem is available for accepting calls but has no call in place active(3) -- the modem is not available for accepting calls because it already has one in place leaving-service(4) -- the modem is functional but is no longer available for accepting calls (Existing calls are allowed to terminate normally.) out-of-service(5) -- the modem is neither available for accepting calls nor does it have a call in place testing(6) -- the modem is running a series of comprehensive on-line diagnostic tests faulty(7) -- the modem has been removed from service by an NMS or due to a hardware or software failure and is considered to be unusable resetting(8) -- the modem is executing a reset sequence" ::= { cmmModemEntry 45 } --================= Free-Form AT Command Group =================== cmmFreeFormAtCmdGroup OBJECT IDENTIFIER ::= { cmmModemInfo 5 } cmmATCommand OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the user-defined AT command string. It can contain up to 256 characters, including a carriage return that will automatically be inserted and a NULL terminator." ::= { cmmFreeFormAtCmdGroup 1 } cmmSelectedModem OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the ID of the modem to which the free-form AT command string should be sent." ::= { cmmFreeFormAtCmdGroup 2 } cmmATCmdStatus OBJECT-TYPE SYNTAX INTEGER { sending(1), not-sending(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object allows the free-form AT command string to be sent and allows the status of the command string to be examined." ::= { cmmFreeFormAtCmdGroup 3 } cmmATCmdResult OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the result string from issuing the free-form AT command ." ::= { cmmFreeFormAtCmdGroup 4 } END