| cmmBoardType |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.1 |
|
The value of this object uniquely defines the CMM
board type - a vendor's authoritative identification
for a module. By convention, this value is allocated
within the SMI enterprises subtree(1.3.6.1.4.1), and
provides an easy and unambiguous means for determining
the type of board.
|
| cmmNumModules |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.2 |
|
The value of this object is the number of CMM modules
contained on this physical CMM circuit board.
|
| cmmModuleNumModems |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.3 |
|
Number of modems per CMM module.
|
| cmmTFTPServer |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.4 |
|
The value of this object is the IP address of the TFTP
server where the object code for CMM modules resides.
This object is persistent.
|
| cmmUpgradePath |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.5 |
|
The value of this object is the path to the object code
for CMM modules on the TFTP server. This object is
persistent.
|
| cmmUpgradeFlag |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.6 |
|
The value of this object is a flag that indicates whether
or not to upgrade the software for the CMM modules on the
board. This object is persistent.
|
| cmmCommitFlag |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.7 |
|
The value of this object is a flag that indicates whether
or not to commit the software for the CMM modules on the
board. This object is persistent.
|
| cmmModemResetLimit |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.8 |
|
The value of this object is the number of times that a
modem can be reset within a given time span before it is
declared to be faulty. If the value is 0 then the modem
will never be declared faulty. This object is persistent.
|
| cmmModemResetTime |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.9 |
|
The value of this object is the time span (in minutes)
during which the given number of resets must occur before
the modem is declared to be faulty. This object is
persistent.
|
| cmmOutgoingInactivityTimeout |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.10 |
|
The value of this object is the duration (in seconds) of a
period of inactivity before an outgoing call is terminated.
This object is persistent.
|
| cmmIncomingInactivityTimeout |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.11 |
|
The value of this object is the duration (in seconds) of a
period of inactivity before an incoming call is terminated.
This object is persistent.
|
| cmmAsyncBaseOrigATCmdStr |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.12 |
|
The value of this object is the default or base set of AT
commands to be used when originating an async call.
|
| cmmAsyncBaseAnswerATCmdStr |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.13 |
|
The value of this object is the default or base set of AT
commands to be used when answering an async call.
|
| cmmAsyncOrigStrModifier |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.14 |
|
The value of this object is a set of additional AT commands
to be used when originating an async call. This object is
persistent.
|
| cmmAsyncAnswerStrModifier |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.15 |
|
The value of this object is a set of additional AT commands
to be used when answering an async call. This object is
persistent.
|
| cmmAsyncOperOrigATCmdStr |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.16 |
|
The value of this object is the operative set of AT commands
to be used when originating an async call. It includes the
base string, the modifier string, and the call timeout value.
|
| cmmAsyncOperAnswerATCmdStr |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.17 |
|
The value of this object is the operative set of AT commands
to be used when answering an async call. It includes the
base string, the modifier string, and the call timeout value.
|
| cmmHdlcBaseOrigATCmdStr |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.18 |
|
The value of this object is the default or base set of AT
commands to be used when originating an HDLC call.
|
| cmmHdlcBaseAnswerATCmdStr |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.19 |
|
The value of this object is the default or base set of AT
commands to be used when answering an HDLC call.
|
| cmmHdlcOrigStrModifier |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.20 |
|
The value of this object is a set of additional AT commands
to be used when originating an HDLC call. This object is
persistent.
|
| cmmHdlcAnswerStrModifier |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.21 |
|
The value of this object is a set of additional AT commands
to be used when answering an HDLC call. This object is
persistent.
|
| cmmHdlcOperOrigATCmdStr |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.22 |
|
The value of this object is the operative set of AT commands
to be used when originating an HDLC call. It includes the
base string, the modifier string, and the call timeout value.
|
| cmmHdlcOperAnswerATCmdStr |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.23 |
|
The value of this object is the operative set of AT commands
to be used when answering an HDLC call. It includes the
base string, the modifier string, and the call timeout value.
|
| cmmBoardAdminStatus |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.24 |
|
The value of this object is the administrative status
of the CMM board.
down(1) -- all modems that belong to this board are to be
removed from service immediately
leave-service(2) -- each modem that belongs to this board is
to be removed from service at the completion
of its current call, if any
up(3) -- each modem that belongs to this module is to become
available for accepting calls
upgrade(4) -- all modules that belong to this board are to be
reloaded with new software and restarted
|
| cmmBoardOperStatus |
.1.3.6.1.4.1.52.4.1.1.18.1.1.1.25 |
|
The value of this object is the operational status of
the CMM board.
initializing(1) -- all modules that belong to this board are booting
up or in the process of a software upgrade
active(2) -- all modules that belong to this board are available
for accepting calls
leaving-service(3) -- all modules that belong to this board are
functional but are no longer available for
accepting calls (Existing calls are allowed
to terminate normally.)
out-of-service(4) -- none of the modules that belong to this board
are available for accepting calls nor do they
have any existing calls
faulty(5) -- all modules that belong to this board are unusable
impaired(6) -- the board is otherwise active but one or more
modules are in the out-of-service, initializing,
testing, faulty, or impaired states
|
| cmmModuleID |
.1.3.6.1.4.1.52.4.1.1.18.1.2.1.1 |
|
The value of this object is an index that uniquely identifies
the CMM module within the physical CMM board.
|
| cmmDpramSize |
.1.3.6.1.4.1.52.4.1.1.18.1.2.1.2 |
|
Size of the DPRAM (in bytes) on the CMM module.
|
| cmmSdramSize |
.1.3.6.1.4.1.52.4.1.1.18.1.2.1.3 |
|
Size of the SDRAM (in bytes) on the CMM module.
|
| cmmCpuType |
.1.3.6.1.4.1.52.4.1.1.18.1.2.1.4 |
|
CPU type on the CMM module.
|
| cmmCpuSpeed |
.1.3.6.1.4.1.52.4.1.1.18.1.2.1.5 |
|
The speed of the CPU (in Megahertz) on the CMM module.
|
| cmmCpuFwRev |
.1.3.6.1.4.1.52.4.1.1.18.1.2.1.6 |
|
Revision of the CPU firmware on the CMM module. This code
is a product of RSA.
|
| cmmEpldId |
.1.3.6.1.4.1.52.4.1.1.18.1.2.1.7 |
|
EPLD ID on the CMM module. (Read from the Altera chip.)
|
| cmmEpldRev |
.1.3.6.1.4.1.52.4.1.1.18.1.2.1.8 |
|
Revision of the EPLD firmware on the CMM module. This
code is produced by Cabletron.
|
| cmmNumBadModems |
.1.3.6.1.4.1.52.4.1.1.18.1.2.1.9 |
|
The value of this object is the number of bad modems
on the CMM module.
|
| cmmModuleAdminStatus |
.1.3.6.1.4.1.52.4.1.1.18.1.2.1.10 |
|
The value of this object is the administrative status
of the CMM module.
down(1) -- all modems that belong to this module are to be
removed from service immediately
leave-service(2) -- each modem that belongs to this module is
to be removed from service at the completion
of its current call, if any
up(3) -- each modem that belongs to this module is to become
available for accepting calls
run-diagnostics(4) -- all modems that belong to this module are
to run a series of comprehensive on-line
diagnostic tests
reset(5) -- the entire module is to be physically reset
faulty(6) -- the entire module is to be immediately removed from
service and considered unusable
|
| cmmModuleOperStatus |
.1.3.6.1.4.1.52.4.1.1.18.1.2.1.11 |
|
The value of this object is the operational status of
the CMM module.
initializing(1) -- the module is booting up or in the process of
a software upgrade
active(2) -- all modems that belong to this module are available
for accepting calls
leaving-service(3) -- all modems that belong to this module are
functional but are no longer available for
accepting calls (Existing calls are allowed
to terminate normally.)
out-of-service(4) -- none of the modems that belong to this module
are available for accepting calls nor do they
have any existing calls
faulty(5) -- the module has been removed from service by an NMS and
is considered to be unusable
impaired(6) -- the module is otherwise active but one or more
modems are in the out-of-service, initializing,
testing, or faulty states
|
| cmmBoardID |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.1 |
|
This object contains the logical number of the CMM board to which
the modem belongs.
|
| cmmModemID |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.2 |
|
This object contains the logical number of the modem on the CMM
module to which the modem belongs.
|
| cmmIFNum |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.3 |
|
This object contains the number of the instance of the Interface
MIB that is associated with this modem.
|
| cmmSessionNum |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.4 |
|
This object contains the session number that is associated with
this modem. Session numbers are assigned, starting with 1, from
the first modem on the first module of the first CMM board and
continuing through the last modem of the last module of the last
CMM board.
|
| cmmDdpPartNum |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.5 |
|
Part number of the DDP controller on the CMM module.
(Read from the DDP chip.)
|
| cmmDdpRevLevel |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.6 |
|
Revision level of the DDP controller on the CMM module.
(Read from the DDP chip.)
|
| cmmDdpFwRev |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.7 |
|
Revison of the DDP controller firmware on the CMM module.
This code is produced by Rockwell.
|
| cmmDDPInterrupts |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.8 |
|
This object contains the number of interrupts received by the CMM
transfer manager since initialization.
|
| cmmRxFlowCtlEvts |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.9 |
|
This object contains the number of received flow control events.
|
| cmmTxFlowCtlEvts |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.10 |
|
This object contains the number of transmitted flow control events.
|
| cmmCallStatus |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.11 |
|
This object contains the current call status.
|
| cmmCallOrigin |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.12 |
|
This object contains an enumerated value that indicates whether
the call originated locally or remotely.
|
| cmmRobbedBitDetected |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.13 |
|
This object contains the robbed bit signalling pattern that was
detected by the modem or 0 if none.
|
| cmmCorrectionType |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.14 |
|
This object contains an enumerated value that indicates the type
of error correction that was negotiated.
|
| cmmCompressionType |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.15 |
|
This object contains an enumerated value that indicates the type
of data compression that was negotiated.
|
| cmmRxRate |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.16 |
|
This object contains the current receive rate.
|
| cmmTxRate |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.17 |
|
This object contains the current transmit rate.
|
| cmmEncoding |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.18 |
|
This object contains the current PCM encoding type.
|
| cmmFraming |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.19 |
|
This object contains the current framing type.
|
| cmmInitialConnectRate |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.20 |
|
This object contains the initial connect rate (in BPS) or the session.
|
| cmmMaxHostWindows |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.21 |
|
This object contains the maximum number of host windows.
|
| cmmMaxCmmWindows |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.22 |
|
This object contains the maximum number of CMM windows.
|
| cmmNumOutHostAcks |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.23 |
|
This object contains the number of host window acks that
have not been processed by the CMM side.
|
| cmmNumOutCmmAcks |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.24 |
|
This object contains the number of CMM window acks that
have not been processed by the host side.
|
| cmmToNetworkOctets |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.25 |
|
This object contains the number of data bytes transmitted
(modem -> central office switch).
|
| cmmFromNetworkOctets |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.26 |
|
This object contains the number of data bytes received
(central office switch -> modem).
|
| cmmToHostOctets |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.27 |
|
This object contains the number of data bytes transmitted
(modem -> m-bus host).
|
| cmmFromHostOctets |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.28 |
|
This object contains the number of data bytes received
(m-bus host -> modem).
|
| cmmToNetworkFrames |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.29 |
|
This object contains the number of frames transmitted
(modem -> central office switch).
|
| cmmFromNetworkFrames |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.30 |
|
This object contains the number of frames received
(central office switch -> modem).
|
| cmmOversizeFrames |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.31 |
|
This object contains the number of HDLC frames received that were
greater than the maximum permissible size.
|
| cmmOverrunErrors |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.32 |
|
This object contains the number of HDLC overrun errors.
|
| cmmCRCErrors |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.33 |
|
This object contains the number of HDLC CRC errors.
|
| cmmAbortedFrames |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.34 |
|
This object contains the number of HDLC frames that were aborted
while they were being received.
|
| cmmRetrainEvents |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.35 |
|
This object contains the number of times that retrain and
renegotiation events have occurred since initialization.
|
| cmmARAEvents |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.36 |
|
This object contains the number of times that automatic
rate adaption events have occurred.
|
| cmmARAFlag |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.37 |
|
This object contains a flag that indicates whether or not
an ARA event has occurred during the current session.
|
| cmmCarrierLossEvents |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.38 |
|
This object contains the number of times that carrier loss
events have occurred.
|
| cmmCarrierLossFlag |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.39 |
|
This object contains a flag that indicates whether or not a
carrier loss event has occurred during the current session.
|
| cmmRcvSignalLevel |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.40 |
|
This object contains the receive signal level.
|
| cmmRcvSignalEQM |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.41 |
|
This object contains the receive signal EQM.
|
| cmmTDMSlot |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.42 |
|
This object contains the number of the TDM slot used by this
session.
|
| cmmResetModemStats |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.43 |
|
This object is used to reset the statistics pertaining to
the selected modem. If written with the value 'true', the
statistics will be reset. If written with the value 'false',
no action will be taken. Its value will always be read as
'false'.
|
| cmmModemAdminStatus |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.44 |
|
This object contains the administrative status of a modem.
down(1) -- the modem is to be removed from service immediately
leave-service(2) -- the modem is to be removed from service at
the completion of its current call, if any
up(3) -- the modem is to become available for accepting calls
run-diagnostics(4) -- the modem is to run a series of
comprehensive on-line diagnostic tests
reset(5) -- the modem is to be physically reset
faulty(6) -- the modem is to be immediately removed from
service and considered unusable
|
| cmmModemOperStatus |
.1.3.6.1.4.1.52.4.1.1.18.1.3.1.45 |
|
This object contains the operational status of a modem.
initializing(1) -- the module to which the modem belongs is booting
up or in the process of a software upgrade
idle(2) -- the modem is available for accepting calls but has no
call in place
active(3) -- the modem is not available for accepting calls because
it already has one in place
leaving-service(4) -- the modem is functional but is no longer
available for accepting calls (Existing calls
are allowed to terminate normally.)
out-of-service(5) -- the modem is neither available for accepting
calls nor does it have a call in place
testing(6) -- the modem is running a series of comprehensive on-line
diagnostic tests
faulty(7) -- the modem has been removed from service by an NMS or
due to a hardware or software failure and is considered
to be unusable
resetting(8) -- the modem is executing a reset sequence
|
