CT-PIC-MIB device MIB details by Enterasys Networks Inc
CT-PIC-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CT-PIC-MIB.
| Vendor: | Enterasys Networks Inc |
|---|---|
| Mib: | CT-PIC-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
CT-PIC-MIB DEFINITIONS ::= BEGIN -- ct-pic-mib -- Revision: 1.02.05 -- Part Number: 2170997 -- Date: March 16, 2000 -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for part -- of the naming tree below: -- -- cabletron { enterprises 52 } -- -- This module will be extended, as additional sub-sections -- of this naming tree are defined. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright March 2000 Cabletron Systems -- PICs come in multiple types. In general they define information which is -- maintained by manufacturing and is updated whenever the module is updated. -- The other use for PICs is to hold other interesting information such as -- MAC addresses etc. In order to support this dual function this MIB -- consists of 2 different tables. The first ctPicTable calls out the -- information that is defined by manufacturing which defines the particular -- module the PIC resides on. The second table ctPicTagTable defines the -- other entries that may or maynot be defined for the given module. The -- second table functions based on TAG id to define the location of the object -- within the PIC and a TAG type field that defines the type of information -- found in that field. IMPORTS Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB ctPIC FROM CTRON-MIB-NAMES; -- DisplayString ::= OCTET STRING -- ctPIC MODULE-IDENTITY -- LAST-UPDATED "000316184621Z" -- ORGANIZATION "Cabletron Systems, Inc" -- CONTACT-INFO -- "Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@cabletron.com -- http://www.ctron.com" -- -- DESCRIPTION -- "This mib module defines a portion of the SNMP enterprise -- MIBs under Cabletron enterprise OID pertaining to -- the Product Information Chip (PIC)." -- -- REVISION "000316184621Z" -- DESCRIPTION "Added enumerations newbridge(5) and enTeraSys(6) to the -- ctPicOEMVendorId leaf. Added a commented out MODULE-IDENTITY -- block to allow for better tracking of revisions." -- ::= { ctSystem 9 } pic OBJECT IDENTIFIER ::= { ctPIC 1 } ctPicNumberEntries OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Defines the number of PIC modules defined by this MIB." ::= { pic 1 } ctPicTable OBJECT-TYPE SYNTAX SEQUENCE OF CtPicEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that describes the contents of all PIC modules accessible by this module." ::= { pic 2 } ctPicEntry OBJECT-TYPE SYNTAX CtPicEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Description of a specific instance of a PIC module." INDEX { ctPicSlot, ctPicIndex } ::= { ctPicTable 1 } CtPicEntry ::= SEQUENCE { ctPicSlot INTEGER, ctPicIndex INTEGER, ctPicLocation OBJECT IDENTIFIER, ctPicStatus INTEGER, ctPicVersion DisplayString, ctPicModuleType OBJECT IDENTIFIER, ctPicMfgPN DisplayString, ctPicMfgSN DisplayString, ctPicMfgPartNumb DisplayString, ctPicMfgSerialNumb DisplayString, ctPicMfgReworkLocation DisplayString, ctPicMfgMfgLocation DisplayString, ctPicMfgDateCode DisplayString, ctPicMfgRevisionCode DisplayString, ctPicTLPN DisplayString, ctPicTLSN DisplayString, ctPicTLPartNumb DisplayString, ctPicTLSerialNumb DisplayString, ctPicTLReworkLocation DisplayString, ctPicTLMfgLocation DisplayString, ctPicTLDateCode DisplayString, ctPicTLRevisionCode DisplayString, ctPicPcbRevision DisplayString, ctPicMacAddr OCTET STRING, ctPicNumbRsvdAddrs INTEGER, ctPicBoardRevision DisplayString, ctPicModuleTypeString DisplayString, ctPicDCDCconverterType DisplayString, ctPicDCDCconvInputPower DisplayString, ctPicSMB1promVersion DisplayString, ctPicAtmMacAddr OCTET STRING, ctPicOEMVendorId INTEGER, ctPicOEMVendorName DisplayString, ctPicMfg97SN DisplayString, ctPicMfg97DateCode DisplayString, ctPicMfg97RevisionCode DisplayString, ctPicTL97SN DisplayString, ctPicTL97DateCode DisplayString, ctPicTL97RevisionCode DisplayString, ctPicOEMTLSN DisplayString } ctPicSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0." ::= { ctPicEntry 1 } ctPicIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the instance of a PIC in a particular slot." ::= { ctPicEntry 2 } ctPicLocation OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Defines location of the PIC chip. This takes on any of the encoding values defined below for backplane, module, daughter board, brim." ::= { ctPicEntry 3 } ctPicStatus OBJECT-TYPE SYNTAX INTEGER { other(1), present(2), notPresent(3), checkSum(4), error(5), limited(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Provides the status of the specific PIC chip. the values are defined as follows: other(1) - firmware can not determine status present(2) - PIC seems to be functional notPresent(3) - PIC not found but expected checkSum(4) - A check sum error occured error(5) - An undefined error condition exists. limited(6) - A limited PIC implementation only type code information is present." ::= { ctPicEntry 4 } ctPicVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "Reflects the version of the PIC implementation that this PIC conforms to. This has the format x.yy . If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 5 } ctPicModuleType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Defines the standard module type value as defined in ctron-oids." ::= { ctPicEntry 6 } ctPicMfgPN OBJECT-TYPE SYNTAX DisplayString (SIZE(9)) ACCESS read-only STATUS mandatory DESCRIPTION "Describes the manufacturing level part number of the module associated with this PIC. This information is encoded as follows: 7 Characters Part Number 2 Characters Rework Location. If any field of this object is non-existent, it will be set to all blanks(ascii 32)." ::= { ctPicEntry 7 } ctPicMfgSN OBJECT-TYPE SYNTAX DisplayString (SIZE(12)) ACCESS read-only STATUS mandatory DESCRIPTION "Describes the manufacturing level serial number of the module associated with this PIC. This information is encoded as follows: 3 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 3 bytes - Board level revision If any field of this object is non-existent, it will be set to all blanks(ascii 32)." ::= { ctPicEntry 8 } ctPicMfgPartNumb OBJECT-TYPE SYNTAX DisplayString (SIZE(7)) ACCESS read-only STATUS mandatory DESCRIPTION "This object presents the part number portion of the ctPicMfgPN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 9 } ctPicMfgSerialNumb OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "This object presents the serial number portion of the ctPicMfgSN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 10 } ctPicMfgReworkLocation OBJECT-TYPE SYNTAX DisplayString (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicMfgPN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 11 } ctPicMfgMfgLocation OBJECT-TYPE SYNTAX DisplayString (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 12 } ctPicMfgDateCode OBJECT-TYPE SYNTAX DisplayString (SIZE(3)) ACCESS read-only STATUS mandatory DESCRIPTION "The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 13 } ctPicMfgRevisionCode OBJECT-TYPE SYNTAX DisplayString (SIZE(3)) ACCESS read-only STATUS mandatory DESCRIPTION "The 3 character board level revision code field of this module. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32)." ::= { ctPicEntry 14 } ctPicTLPN OBJECT-TYPE SYNTAX DisplayString (SIZE(9)) ACCESS read-only STATUS mandatory DESCRIPTION "Describes the top level part number of the module associated with this PIC. This information is encoded as follows: 7 Characters Part Number 2 Characters Rework Location. If any field of this object is non-existent, it will be set to all blanks(ascii 32)." ::= { ctPicEntry 15 } ctPicTLSN OBJECT-TYPE SYNTAX DisplayString (SIZE(12)) ACCESS read-only STATUS mandatory DESCRIPTION "Describes the top level serial number of the module associated with this PIC. This information is encoded as follows: 3 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 3 bytes - Top level revision If any field of this object is non-existent, it will be set to all blanks(ascii 32)." ::= { ctPicEntry 16 } ctPicTLPartNumb OBJECT-TYPE SYNTAX DisplayString (SIZE(7)) ACCESS read-only STATUS mandatory DESCRIPTION "This object presents the part number portion of the ctPicTLPN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 17 } ctPicTLSerialNumb OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "This object presents the serial number portion of the ctPicTLSN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 18 } ctPicTLReworkLocation OBJECT-TYPE SYNTAX DisplayString (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicTLPN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 19 } ctPicTLMfgLocation OBJECT-TYPE SYNTAX DisplayString (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 20 } ctPicTLDateCode OBJECT-TYPE SYNTAX DisplayString (SIZE(3)) ACCESS read-only STATUS mandatory DESCRIPTION "The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 21 } ctPicTLRevisionCode OBJECT-TYPE SYNTAX DisplayString (SIZE(3)) ACCESS read-only STATUS mandatory DESCRIPTION "The 3 character top level revision code field of this module. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32)." ::= { ctPicEntry 22 } ctPicPcbRevision OBJECT-TYPE SYNTAX DisplayString (SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "Defines the Cabletron revision of the art work for this module. If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 23 } ctPicMacAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The base MAC address(ethernet format)assigned to the module. If this field is not used then it should have a value of a zero length string. If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 24 } ctPicNumbRsvdAddrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of reserved MAC addresses starting at the address as defined in ctPicMacAddr. If no MAC addresses are reserved this object should have a value of 0." ::= { ctPicEntry 25 } ctPicBoardRevision OBJECT-TYPE SYNTAX DisplayString (SIZE(3)) ACCESS read-only STATUS mandatory DESCRIPTION "Defines the Cabletron board level revision level code for this module. If non-existent, this object will be set to blanks (ascii 32)." ::= { ctPicEntry 26 } ctPicModuleTypeString OBJECT-TYPE SYNTAX DisplayString (SIZE(16)) ACCESS read-only STATUS mandatory DESCRIPTION "Describes the module associated with this PIC in a human readable format. If non-existent, this object will be set to blanks (ascii 32)." ::= { ctPicEntry 27 } ctPicDCDCconverterType OBJECT-TYPE SYNTAX DisplayString (SIZE(12)) ACCESS read-only STATUS mandatory DESCRIPTION "Describes the voltage of the installed DCDC Converter input and output lines. If the Module does not contain a DCDC Converter this object will be set to blanks (ascii 32)." ::= { ctPicEntry 28 } ctPicDCDCconvInputPower OBJECT-TYPE SYNTAX DisplayString (SIZE(3)) ACCESS read-only STATUS mandatory DESCRIPTION "Describes the maximum allowed input power for the DCDC input line. If the Module does not contain a DCDC Converter this object will be set to blanks (ascii 32)." ::= { ctPicEntry 29 } ctPicSMB1promVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "Describes the current version of the SMB1 prom. If the Module does not contain an SMB1 prom this object will be set to blanks (ascii 32)." ::= { ctPicEntry 30 } ctPicAtmMacAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "The Atm MAC address(atm format)assigned to the chassis. If this field is not used then it should have a value of a zero length string. If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 31 } ctPicOEMVendorId OBJECT-TYPE SYNTAX INTEGER { cabletron(1), nEC(2), dEC(3), cPQ(4), newbridge(5), enTeraSys(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Represents the OEM vendor for a product. If the Module does not program this value this object will be set to blanks (ascii 32)." ::= { ctPicEntry 32 } ctPicOEMVendorName OBJECT-TYPE SYNTAX DisplayString (SIZE(40)) ACCESS read-only STATUS mandatory DESCRIPTION "ASCII name of the OEM vendor for the product. If the Module does not program this value this object will be set to blanks (ascii 32)." ::= { ctPicEntry 33 } ctPicMfg97SN OBJECT-TYPE SYNTAX DisplayString (SIZE(12)) ACCESS read-only STATUS mandatory DESCRIPTION "Describes the manufacturing level serial number of the module associated with this PIC. This information is encoded as follows: 4 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 2 bytes - Board level revision If any field of this object is non-existent, it will be set to all blanks(ascii 32)." ::= { ctPicEntry 34 } ctPicMfg97DateCode OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "The 4 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicMfg97SN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 35 } ctPicMfg97RevisionCode OBJECT-TYPE SYNTAX DisplayString (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The 2 character board level revision code field of this module. This object contains the same information as presented in ctPicMfg97SN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32)." ::= { ctPicEntry 36 } ctPicTL97SN OBJECT-TYPE SYNTAX DisplayString (SIZE(12)) ACCESS read-only STATUS mandatory DESCRIPTION "Describes the top level serial number of the module associated with this PIC. This information is encoded as follows: 4 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 2 bytes - Top level revision If any field of this object is non-existent, it will be set to all blanks(ascii 32)." ::= { ctPicEntry 37 } ctPicTL97DateCode OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "The 4 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicTL97SN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32)." ::= { ctPicEntry 38 } ctPicTL97RevisionCode OBJECT-TYPE SYNTAX DisplayString (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The 2 character top level revision code field of this module. This object contains the same information as presented in ctPicTL97SN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32)." ::= { ctPicEntry 39 } ctPicOEMTLSN OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) ACCESS read-only STATUS mandatory DESCRIPTION "Describes the top level serial number of the module as specified by the OEM for this device. If non-existent, this object will be set to all blanks (ascii 32)." ::= { ctPicEntry 40 } ctPicECOTable OBJECT-TYPE SYNTAX SEQUENCE OF CtPicECOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each module that contains a PIC may have several ECOs performed on it. The ctPicECOTable reflects a history of the last 5 ECOs that have been performed on this module." ::= { pic 3 } ctPicECOEntry OBJECT-TYPE SYNTAX CtPicECOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes a particular PIC ECO entry." INDEX { ctPicECOSlot, ctPicECOIndex, ctPicECOID } ::= { ctPicECOTable 1 } CtPicECOEntry ::= SEQUENCE { ctPicECOSlot INTEGER, ctPicECOIndex INTEGER, ctPicECOID INTEGER, ctPicECONumber DisplayString } ctPicECOSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0. This refers to the same slot as identified by ctPicSlot in ctPicTable." ::= { ctPicECOEntry 1 } ctPicECOIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The specific PIC instance that this ECO entry pertains to. This refers to the same instance as identified by ctPicIndex in ctPicTable." ::= { ctPicECOEntry 2 } ctPicECOID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely defines the ECO entry that is being described by this conceptual row." ::= { ctPicECOEntry 3 } ctPicECONumber OBJECT-TYPE SYNTAX DisplayString (SIZE(12)) ACCESS read-only STATUS mandatory DESCRIPTION "Defines Cabletron's ECO number that describes the revision of the hardware. This object is organized as follows: 6 Characters ECO Number 2 Characters Rework Location 4 Characters Date Code" ::= { ctPicECOEntry 4 } ctPicDiagTable OBJECT-TYPE SYNTAX SEQUENCE OF CtPicDiagEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each module that contains a PIC may have several Diags performed on it. The ctPicDiagTable reflects a history of the last 8 Diags that have been performed on this module. Important: This table only contains entries diagnostic entries that are defined. Therefore it is possible for this table to be empty 'does not respond to a GET or GET-NEXT' if there are no diagnostic errors present." ::= { pic 5 } ctPicDiagEntry OBJECT-TYPE SYNTAX CtPicDiagEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes a particular PIC Diag entry." INDEX { ctPicDiagSlot, ctPicDiagIndex, ctPicDiagID } ::= { ctPicDiagTable 1 } CtPicDiagEntry ::= SEQUENCE { ctPicDiagSlot INTEGER, ctPicDiagIndex INTEGER, ctPicDiagID INTEGER, ctPicDiagResults DisplayString } ctPicDiagSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0. This refers to the same slot as identified by ctPicSlot in ctPicTable." ::= { ctPicDiagEntry 1 } ctPicDiagIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The specific PIC instance that this Diag entry pertains to. This refers to the same instance as identified by ctPicIndex in ctPicTable." ::= { ctPicDiagEntry 2 } ctPicDiagID OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely defines the Diag entry that is being described by this conceptual row." ::= { ctPicDiagEntry 3 } ctPicDiagResults OBJECT-TYPE SYNTAX DisplayString (SIZE(64)) ACCESS read-only STATUS mandatory DESCRIPTION "Defines Cabletron's Diag results code." ::= { ctPicDiagEntry 4 } -- The following is the control group for the PIC. -- Currently only one object is defined for this group. ctPicControlTable OBJECT-TYPE SYNTAX SEQUENCE OF CtPicControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table allowing management control of PIC functionality. " ::= { pic 8 } ctPicControlEntry OBJECT-TYPE SYNTAX CtPicControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes a particular PIC Control Table entry." INDEX { ctPicSlot, ctPicIndex } ::= { ctPicControlTable 1 } CtPicControlEntry ::= SEQUENCE { ctPicRefresh INTEGER } ctPicRefresh OBJECT-TYPE SYNTAX INTEGER { reFresh(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Setting this value causes the PIC Driver to clear cached memory and to reread the PIC chip. This functionality removes the need for manufacturing to power cycle a board to ensure proper PIC programming. Reading this object always returns a zero (0)." ::= { ctPicControlEntry 1 } ctPicLocationID OBJECT IDENTIFIER ::= { pic 4 } ctPicLocationModule OBJECT IDENTIFIER ::= { ctPicLocationID 1 } ctPicBrim OBJECT IDENTIFIER ::= { ctPicLocationID 2 } ctPicChassis OBJECT IDENTIFIER ::= { ctPicLocationID 3 } ctPicDaughter OBJECT IDENTIFIER ::= { ctPicLocationID 4 } ctPicBackPlane OBJECT IDENTIFIER ::= { ctPicLocationID 5 } END