| inbMonarchINB |
.1.3.6.1.4.1.52.4.1.2.12.1.2.1.1.2 |
|
Two physical INB interfaces may exist on a module. This
object distinquishes which INB, INB-A or INB-B.
|
| inbMonarchSystemINB |
.1.3.6.1.4.1.52.4.1.2.12.1.1.1.1.1 |
|
Two physical INB's may exist on a module. This
object distinquishes which INB, INB-A or INB-B.
|
| inbMonarchStatusTimeStamp |
.1.3.6.1.4.1.52.4.1.2.12.1.1.1.1.2 |
|
This object represents the value of sysUptime when
the Monarch last changed.
|
| inbMonarchBandwidth |
.1.3.6.1.4.1.52.4.1.2.12.1.1.1.1.3 |
|
The bandwidth of this INB in Megabits.
|
| inbMonarchTDMSlotMode |
.1.3.6.1.4.1.52.4.1.2.12.1.1.1.1.4 |
|
The automatic TDM mode overides any preset TDM
allocation. All boards get an equal number of
pre-allocated TDM slots, adding up to 100% of total
INB bandwidth, and have Round Robin enabled. The
automatic mode will, in effect, provide each board
with a 1/(number of boards) minimum guarantee
INB bandwidth.
The userPolicy mode will have the per board policy
enforced. Each board will have a level of service
(TDM slots, Round Robin arbitration from the
inbMonarchTable) associated with it to take effect
when this object is set to user_policy. Newly
inserted boards will default to Round Robin and
share the remaining fixed INB bandwidth
(inbMonarchTDMSlotTotal - inbMonarchTDMSlotActual).
|
| inbMonarchTDMSlotTotal |
.1.3.6.1.4.1.52.4.1.2.12.1.1.1.1.5 |
|
This object represents the total possible number of INB
backplane TDM slots.
|
| inbMonarchSystemTDMSlotActual |
.1.3.6.1.4.1.52.4.1.2.12.1.1.1.1.6 |
|
This object represents the total number of allocated INB
backplane TDM slots. This is the sum of all instances of
inbMonarchTDMSlotRequest in userPolicy mode. In automatic
mode this number would represent the number of inserted
boards.
|
| inbMonarchTDMSlotbandwidth |
.1.3.6.1.4.1.52.4.1.2.12.1.1.1.1.7 |
|
This object represents the bandwidth in bits that
each slot represents on the backplane.
|
| inbMonarchSlot |
.1.3.6.1.4.1.52.4.1.2.12.1.2.1.1.1 |
|
The slot number containing this module.
|
| inbMonarchStatus |
.1.3.6.1.4.1.52.4.1.2.12.1.2.1.1.3 |
|
Application state of the monarch application on this
module. Standby - indicates this module is not the
monarch but can be. SysUndefined - indicates this
module can not be monarch. Operational - says this
module is the monarch.
|
| inbMonarchLinkStatus |
.1.3.6.1.4.1.52.4.1.2.12.1.2.1.1.4 |
|
This object describes the state of the backplane. LinkUp
is when this INB detects the clock on the backplane.
LinkDown is when no backplane clock has been detected.
|
| inbMonarchLinkCapacity |
.1.3.6.1.4.1.52.4.1.2.12.1.2.1.1.5 |
|
The bandwidth capacity of this board in Megabytes.
|
| inbMonarchTDMSlotRequest |
.1.3.6.1.4.1.52.4.1.2.12.1.2.1.1.6 |
|
This object is the number of fixed TDM slots requested
for this board . NOTE: new request will take effect the
next time the inbMonarchTDMSlotMode object is set to
userPolicy. NOTE: this value has no meaning when the
inbMonarchTDMSlotMode is automatic.
|
| inbMonarchTDMSlotActual |
.1.3.6.1.4.1.52.4.1.2.12.1.2.1.1.7 |
|
This object is the actual number of fixed TDM slots
given to this board. In automatic mode, this value is the
total number of slots divided by the number of inserted
boards, in userPolicy mode, this reflects the
inbMonarchTDMSlotRequest value at the last time the
chassis entered userPolicy mode.
|
| inbMonarchRoundRobinControl |
.1.3.6.1.4.1.52.4.1.2.12.1.2.1.1.8 |
|
This object enables or disable this INB the ability to
participate in the Round Robin arbitration phase.
|
| inbStatsSlot |
.1.3.6.1.4.1.52.4.1.2.12.1.3.1.1.1 |
|
The slot number containing this module.
|
| inbStatsINB |
.1.3.6.1.4.1.52.4.1.2.12.1.3.1.1.2 |
|
Two physical INB interfaces may exist on a module. This
object distinquishes which INB, INB-A or INB-B.
|
| inbStatsIfindex |
.1.3.6.1.4.1.52.4.1.2.12.1.3.1.1.3 |
|
The interface number of the INB. The interface
identified by a particular value of this
object is the same interface as identified by the
same value of the ifIndex object defined in RFC 1213.
|
| inbStatsUniCastCells |
.1.3.6.1.4.1.52.4.1.2.12.1.3.1.1.4 |
|
Number of UniCast INB cells received from the backplane.
|
| inbStatsMultiCastCells |
.1.3.6.1.4.1.52.4.1.2.12.1.3.1.1.5 |
|
Number of multi-cast INB cells received from the backplane.
|
| inbStatsBroadCastCells |
.1.3.6.1.4.1.52.4.1.2.12.1.3.1.1.6 |
|
Number of broadcast INB cells received from the backplane.
|
| inbStatsXmitCells |
.1.3.6.1.4.1.52.4.1.2.12.1.3.1.1.7 |
|
Number of INB cells transmitted to the backplane.
|
| inbStatsRecvSeqErrs |
.1.3.6.1.4.1.52.4.1.2.12.1.3.1.1.8 |
|
Number of pkts with sequence errors received from
the backplane.
|
| inbStatsRecvChksumErrs |
.1.3.6.1.4.1.52.4.1.2.12.1.3.1.1.9 |
|
Number of pkts with checksum errors received from
the backplane.
|
| inbStatsxmitToFps |
.1.3.6.1.4.1.52.4.1.2.12.1.3.1.1.10 |
|
Number of transmit errors to FPS.
|
| inbStatsToFpsDrops |
.1.3.6.1.4.1.52.4.1.2.12.1.3.1.1.11 |
|
INBC receive fifo full count. This represents the
number of cells that were not forwarded to the FPS.
|
| inbStatsFromInbErrs |
.1.3.6.1.4.1.52.4.1.2.12.1.3.1.1.12 |
|
Number of INB receive errors from the backplane. This
includes FPSC xmit errors(inbStatsxmitToFps), INBC
receive sequence errors (inbStatsRecvSeqErrs)
and INBC checksum errors(inbStatsRecvChksumErrs).
|
| inbStatsToINBDrops |
.1.3.6.1.4.1.52.4.1.2.12.1.3.1.1.13 |
|
Number of FPSC recv frame drop count. This represents
the number of frames that were not sent out on the INB
backplane.
|
| inbStatsToInbErrs |
.1.3.6.1.4.1.52.4.1.2.12.1.3.1.1.14 |
|
Number of INB backplane transmit errors. This includes
FPSC receive timeout errors
|
