CTRON-FRONTPANEL-MIB.mib object view, vendor Enterasys-Networks-Inc
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file CTRON-FRONTPANEL-MIB and use it to monitor vendor specific OID's.
CTRON-FRONTPANEL-MIB file content
Object view of CTRON-FRONTPANEL-MIB:
Scalar Object |
ctFpRedundReset |
.1.3.6.1.4.1.52.4.1.5.5.1.1 |
If this object is set to Reset it will cause a reset
of the front panel redundancy. Setting this object to
NoReset will do nothing. This object will always be
read as NoReset.
|
ctFpRedundPollInterval |
.1.3.6.1.4.1.52.4.1.5.5.1.2 |
Get/Set the number of seconds between polls for front
panel redundancy.
|
ctFpRedundRetrys |
.1.3.6.1.4.1.52.4.1.5.5.1.3 |
Get/Set the the number of unanswered polls allowed for
the front panel redundancy before it switches ports.
|
ctFpRedundNumAddr |
.1.3.6.1.4.1.52.4.1.5.5.1.4 |
Get the number of IP Addresses associated with front panel
redundancy.
|
ctFpRedundAddAddr |
.1.3.6.1.4.1.52.4.1.5.5.1.5 |
Add an IP Address to the polling list for the front panel
redundancy.
|
ctFpRedundDelAddr |
.1.3.6.1.4.1.52.4.1.5.5.1.6 |
Delete an IP Address from the polling list for the
front panel redundancy.
|
ctFpRedundActivePort |
.1.3.6.1.4.1.52.4.1.5.5.1.7 |
Get/Set the front panel port you want to be active
when front panel redundancy is enabled.
|
ctFpRedundEnable |
.1.3.6.1.4.1.52.4.1.5.5.1.8 |
If this object is set to enable, the front panel
redundancy will be activated. If this object is set
to disable, the front panel redundancy will be
deactivated. When read, this object will returns the
state of the object based on the last request
made.
|
ctFpRedundAddrEntry |
.1.3.6.1.4.1.52.4.1.5.5.1.9.1 |
Tabular Object |
ctFpRedundAddrId |
.1.3.6.1.4.1.52.4.1.5.5.1.9.1.1 |
A unique value identifying an element in a sequence of
member IP Addresses which belong to the front panel
redundancy. This value goes from 1 to the maximum
number of IP Addresses which may be included in
front panel redundancy.
|
ctFpRedundAddrIPAddr |
.1.3.6.1.4.1.52.4.1.5.5.1.9.1.2 |
Returns an IP Address associated with the front panel
redundancy.
|
Table |
ctFpRedundAddrTable |
.1.3.6.1.4.1.52.4.1.5.5.1.9 |
Object Identifier |
ctFpRedund |
.1.3.6.1.4.1.52.4.1.5.5.1 |