CTRON-Q-BRIDGE-MIB-EXT.mib object view, vendor Enterasys-Networks-Inc
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file CTRON-Q-BRIDGE-MIB-EXT and use it to monitor vendor specific OID's.
CTRON-Q-BRIDGE-MIB-EXT file content
Object view of CTRON-Q-BRIDGE-MIB-EXT:
| Scalar Object |
| ctDot1qPortVlanEntry |
.1.3.6.1.4.1.52.4.1.2.16.7.1.1.1 |
|
Information controlling proprietary VLAN configuration for
a port on the device. This is indexed by dot1dBasePort.
|
| ctDot1qVlanDynamicEgressEntry |
.1.3.6.1.4.1.52.4.1.2.16.7.1.2.1 |
|
Information controlling proprietary VLAN configuration
for a device.
|
| ctDot1qVlanCurrentEntryExt |
.1.3.6.1.4.1.52.4.1.2.16.7.1.3.1 |
|
Information for a VLAN configured into the device by
(local or network) management or created dynamically.
|
| Tabular Object |
| ctDot1qPortDefaultForwardMode |
.1.3.6.1.4.1.52.4.1.2.16.7.1.1.1.1 |
|
The method used to forward frames belonging to VLANs that
do not have an entry in the dot1qVlanCurrentTable.
When this is forwardNoFrames(1), the device will not forward
traffic out this port, for any VLAN that does not have an
entry in the dot1qVlanCurrentTable.
When this is forwardAllFramesAsTagged(2), the device will
forward all traffic out this port, with an 802.1Q VLAN tag,
for any VLAN that does not have an entry in
dot1qVlanCurrentTable.
When this is forwardAllFramesAsUntagged(3), the device will
forward all traffic out this port, without an 802.1Q VLAN tag,
for any VLAN that does not have an entry in
dot1qVlanCurrentTable.
This control does not affect VLAN independent BPDU frames,
such as GVRP and STP. It does affect VLAN dependent BPDU
frames, such as GMRP.
|
| ctDot1qPortDiscardTagged |
.1.3.6.1.4.1.52.4.1.2.16.7.1.1.1.2 |
|
The method used to discard all incoming VLAN tagged frames
for the port specified by the indexing of this entry.
When this is enabled(1), the device will discard all 802.1Q
tagged packets received on this port.
When this is disabled(2), the device will NOT discard frames
received on this port based on the presence of an 802.1Q tag.
The behavior of this method in conjunction with the
dot1qPortAcceptableFrameTypes leaf of Q-BRIDGE-MIB [RFC2674]
is that of a logical OR.
|
| ctDot1qPortReplaceTCI |
.1.3.6.1.4.1.52.4.1.2.16.7.1.1.1.3 |
|
The method used to replace the Tag Control Information (TCI)
field in all VLAN tagged frames received on the port specified
by the indexing of this entry.
When this is enabled(1), the device will replace the 802.1Q
TCI field with results of the INGRESS stage of frame forwarding.
Logically, this happens immediately prior to the PROGRESS stage
of frame relay.
When this is disabled(2), the device operates in compliance with
the IEEE 802.1Q standard and honors the TCI field of incident
frames.
|
| ctDot1qVlanDynamicEgressIndex |
.1.3.6.1.4.1.52.4.1.2.16.7.1.2.1.1 |
|
The VLAN to which this entries' dynamic egress status
applies.
|
| ctDot1qVlanDynamicEgressStatus |
.1.3.6.1.4.1.52.4.1.2.16.7.1.2.1.2 |
|
The state of Dynamic Egress operation on this VLAN. The
value enabled(1) indicates that Dynamic Egress is enabled on
this VLAN. If Dynamic Egress is enabled for a VLAN the
following rules are applied to received frames:
1. If the frame is untagged, and
2. The frame is successfully classified to the specified
VLAN, and
3. The port the frame was received on is not configured in
dot1qVlanCurrentEgressPorts, dot1qVlanCurrentUntaggedPorts,
or dot1qVlanForbiddenEgressPorts, for the classified VLAN,
and
4. The port is configured for forwardNoFrames(1) in
ctDot1qPortDefaultForwardMode (if supported), then
5. The port the frame was received on will be added to
the dot1qVlanCurrentEgressPorts and
dot1qVlanCurrentUntaggedPorts for the classified VLAN.
If the VLAN was not preexisting the dot1qVlanStatus
leaf for the VLAN will return other(1).
|
| ctDot1qVlanForbidEgressPorts |
.1.3.6.1.4.1.52.4.1.2.16.7.1.3.1.1 |
|
The current set of ports which are prohibited from being
included in the egress list for this VLAN. This object is a
logical combination of dot1qVlanForbiddenEgressPorts and zero
or more proprietary methods of forbidding egress on a per port
per VLAN basis.
|
| Table |
| ctDot1qPortVlanExtTable |
.1.3.6.1.4.1.52.4.1.2.16.7.1.1 |
|
A table containing per port control and status information
for Cabletron proprietary extensions pertaining to VLAN
configuration in the device.
|
| ctDot1qVlanDynamicEgressTable |
.1.3.6.1.4.1.52.4.1.2.16.7.1.2 |
|
A table containing per VLAN control and status
information for Cabletron proprietary egress extensions for
VLAN configuration in the device.
|
| ctDot1qVlanCurrentExtTable |
.1.3.6.1.4.1.52.4.1.2.16.7.1.3 |
|
A table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management or created dynamically created.
This table provides proprietary extensions to
dot1qVlanCurrentTable as defined in RFC2674.
|
| Object Identifier |
| ctQBridgeMibExt |
.1.3.6.1.4.1.52.4.1.2.16.7 |
|
This MIB module defines a portion of the SNMP enterprise
MIBs under the Cabletron enterprise OID pertaining to
the configuration of switches that support IEEE 802.1Q
[802.1Q] and the Q-BRIDGE-MIB [RFC2674].
|
| ctQBridgeMIBObjects |
.1.3.6.1.4.1.52.4.1.2.16.7.1 |
| ctQBridgeConformance |
.1.3.6.1.4.1.52.4.1.2.16.7.2 |
| ctQBridgeGroups |
.1.3.6.1.4.1.52.4.1.2.16.7.2.1 |
| ctQBridgeCompliances |
.1.3.6.1.4.1.52.4.1.2.16.7.2.2 |
| Group |
| ctQBridgePortGroup |
.1.3.6.1.4.1.52.4.1.2.16.7.2.1.1 |
|
********* THIS GROUP IS DEPRECATED **********
A collection of objects providing port level control
over the forwarding behavior of frames classified to
unconfigured VLANs.
|
| ctQBridgeVlanGroup |
.1.3.6.1.4.1.52.4.1.2.16.7.2.1.2 |
|
A collection of objects providing device level control
over the addition and deletion of unconfigured ports to
the egress lists of VLANs.
|
| ctQBridgePortGroup2 |
.1.3.6.1.4.1.52.4.1.2.16.7.2.1.3 |
|
A collection of objects providing port level control
over the ingress and egress of frames received by the device.
|
| ctQBridgeVlanCurrentForbidGroup |
.1.3.6.1.4.1.52.4.1.2.16.7.2.1.4 |
|
A collection of objects providing read-only current operational
information pertaining to forbidden egress on a per VLAN basis.
|
| ctQBridgePortReplaceTCIGroup |
.1.3.6.1.4.1.52.4.1.2.16.7.2.1.5 |
|
An object providing port level control TCI replacement.
|
