CTRON-SFPS-COMMON-MIB.mib object view, vendor Enterasys-Networks-Inc

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2024 can import MIB file CTRON-SFPS-COMMON-MIB and use it to monitor vendor specific OID's.

CTRON-SFPS-COMMON-MIB file content

Object view of CTRON-SFPS-COMMON-MIB:

Scalar Object
sfpsGenericVersionEntry	.1.3.6.1.4.1.52.4.2.4.2.1.1.3.1.1
An entry in the table instanced by the Generic name.
sfpsDiagLogConfigEntry	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1
Each entry contains configuration data.
sfpsAOPropertiesEntry	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1
An entry in the table instanced by the tag.
sfpsAOPropertiesAPITag	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.1
sfpsAOPropertiesAPITagString	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.2
sfpsAOPropertiesAPIPrettyType	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.3
sfpsAOPropertiesAPINumBytes	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.4
sfpsAOPropertiesAPIIsLimit	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.5
sfpsAOPropertiesAPIIsMobile	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.6
sfpsAOPropertiesAPIIsSingle	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.7
sfpsAOPropertiesAPINoBlock	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.8
sfpsAOPropertiesAPINoDelta	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.9
sfpsAOPropertiesAPIAction	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.2.10
Tabular Object
sfpsGenericVersionHash	.1.3.6.1.4.1.52.4.2.4.2.1.1.3.1.1.1
Hash of the name to make it a unique entry.
sfpsGenericVersionName	.1.3.6.1.4.1.52.4.2.4.2.1.1.3.1.1.2
Name of the Generic.
sfpsGenericVersionVersion	.1.3.6.1.4.1.52.4.2.4.2.1.1.3.1.1.3
Version stamp of the generic component.
sfpsGenericVersionMIBRev	.1.3.6.1.4.1.52.4.2.4.2.1.1.3.1.1.4
MIB version of the generic component.
sfpsDiagLogConfigInstance	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.1
The instance of this Event Logger.
sfpsDiagLogConfigStatus	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.2
The status of this Event Logger object.
sfpsDiagLogConfigIndex	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.3
The current index in the circular buffer where events are being logged.
sfpsDiagLogConfigStart	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.4
The starting index in the circular buffer to display.
sfpsDiagLogConfigStop	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.5
The last index in the circular buffer to display.
sfpsDiagLogConfigLogIndex	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.6
The current index in the log buffer where we are looking.
sfpsDiagLogConfigFilterMatch	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.7
The specified Event Id to log. A value of 0 will cause every event to be logged.
sfpsDiagLogConfigFilterStart	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.8
The beginning range of Event Ids to log.
sfpsDiagLogConfigFilterStop	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.9
The ending range of Event Ids to log.
sfpsDiagLogAccessPortControl	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.10
Leaf to be used to set a port bit mask. This bit mask represents which ports shall be statically set to be an ACCESS port. Bit 0 corresponds to Port 1.
sfpsDiagLogCallIdleTime	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.11
Leaf to be used to set a debug variable. (in seconds)
sfpsDiagLogFilterAddTimer	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.12
Leaf to be used to set how long a filter connection should be (Default : 900 seconds)
sfpsDiagLogRedirectorWakeup	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.13
Leaf to be used to set how often the Redirector wakes up to service the queue (in seconds)
sfpsDiagLogRedirectorNumPackets	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.14
Leaf to be used to set how many packets the Redirector reads off at a time.
sfpsDiagLogEndSystemTimeout	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.15
Leaf to be used to set a debug variable. (Default : 10 minutes) (in seconds)
sfpsDiagLogSwitchIdleInterval	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.16
Leaf to be used to set a debug variable. (in seconds)
sfpsDiagLogInlnFltrAgeTime	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.17
Leaf to be used to set the BAF age time (seconds).
sfpsDiagLogConfigDebug9	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.18
Leaf to be used to set a debug variable.
sfpsDiagLogSignalThrottle	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.19
Leaf to be used to set the Signal Thottle knob. Throttling defaults to off. By setting it to 1,2,5, or 10 one can dictate the rate (signal/second) at which SFPS sends signals to the ACMS Signal Stack..
sfpsDiagLogConfigOther	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.20
Dictates the format of the Event to be displayed (either Text or Integer values).
sfpsDiagLogConfigSoftReset	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.21
sfpsDiagLogConfigSFPSVlan	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.22
sfpsAOPropertiesTag	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.1
sfpsAOPropertiesTagDescriptor	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.2
sfpsAOPropertiesPrettyType	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.3
sfpsAOPropertiesNumBytes	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.4
sfpsAOPropertiesIsLimit	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.5
sfpsAOPropertiesIsMobile	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.6
sfpsAOPropertiesIsSingle	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.7
sfpsAOPropertiesNoBlock	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.8
sfpsAOPropertiesNoDelta	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.1.1.9
Table
sfpsGenericVersionTable	.1.3.6.1.4.1.52.4.2.4.2.1.1.3.1
Table describing the SFS generics and their versions that are contained within this image.
sfpsDiagLogConfigTable	.1.3.6.1.4.1.52.4.2.4.2.2.6.1.1
This table contains the informtion to configure an Event Logger object.
sfpsAOPropertiesTable	.1.3.6.1.4.1.52.4.2.4.2.1.1.5.1