CTRON-SFPS-CONNECTION-MIB device MIB details by Enterasys Networks Inc

CTRON-SFPS-CONNECTION-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CTRON-SFPS-CONNECTION-MIB.

Vendor:	Enterasys Networks Inc
Mib:	CTRON-SFPS-CONNECTION-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

CTRON-SFPS-CONNECTION-MIB DEFINITIONS ::= BEGIN

--  sfps-connection-mib.txt
--  Revision: 0.0.11
--
--  Cabletron Systems, Inc.
--  35 Industrial Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com
--
--  This module provides authoritative definitions for Cabletron's
--  enterprise specific Fast Packet Switching Services API MIB.
--
--  This module will be extended, as required.
--
--
--  Cabletron Systems reserves the right to make changes in
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.
--  Copyright October 93 Cabletron Systems
--

IMPORTS
      OBJECT-TYPE
                FROM RFC-1212
      DisplayString
                FROM RFC1213-MIB
--  tcl    enterprises
--        IpAddress, Gauge
      Counter, TimeTicks
                FROM RFC1155-SMI
 
--  These Objects are defined in the file sfps-inc.mib.txt
        sfpsSwitchConnections, sfpsConnectionAPI, sfpsConnectionStats,
        sfpsConnectionTestAPI, sfpsConnectionQueryAPI, sfpsConnectionConfigAPI,
    sfpsConnectionLookupAPI, sfpsCNXPacketStats
                FROM CTRON-SFPS-INCLUDE-MIB;

--  Textual Conventions

--SfpsSwitchInstance ::= OCTET STRING (SIZE(4))
--  this will map to chassis.module index value
 
SfpsSwitchPort ::= INTEGER
--  this will map to chassis.module.portgroup.portsubgroup.port index value
 
SfpsAddress ::= OCTET STRING (SIZE (6))
--  this will map to a MAC address
  


-- SFPS Switching Connection Group
-- This group contains the managed objects for maintaining SFPS connections.

--  SFPS Connection Table
--  This table contains the SFPS-specific connection table managed objects.
--  Note that because this table is indexed by the SfpsSwitchPort index
--  which will map to a chassis.module.portsubgroup.portgroup.port
--  location, this table will show connections at the chassis,module,portgroups,
--  and port levels.

sfpsConnectionTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsConnectionEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table contains the connection information for all
                 active connections on the SFPS access ports."
        ::= { sfpsSwitchConnections 1 }

sfpsConnectionEntry      OBJECT-TYPE
        SYNTAX  SfpsConnectionEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry specifies the connection information for the
                 active connection for which the entry exists."
        INDEX   { sfpsConnectionDestination, sfpsConnectionSource }
        ::= { sfpsConnectionTable 1 }

SfpsConnectionEntry ::=
        SEQUENCE {
                sfpsConnectionDestination       SfpsAddress,
                sfpsConnectionSource            SfpsAddress,
                sfpsConnectionPrimInPort        INTEGER,
                sfpsConnectionPrimOutPort       INTEGER,
                sfpsConnectionSecInPort         INTEGER,
                sfpsConnectionSecOutPort        INTEGER,
                sfpsConnectionCtrlStatus        INTEGER,
                sfpsConnectionAdminStatus       INTEGER,
                sfpsConnectionAge               TimeTicks,
                sfpsConnectionType              INTEGER,
                sfpsConnectionPkts              Counter,
                sfpsConnectionBytes             Counter,
                sfpsConnectionCanAge            INTEGER,
                sfpsConnectionPrimOutPorts      DisplayString,
                sfpsConnectionSecOutPorts       DisplayString
                }

sfpsConnectionDestination       OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "The destination SFPS address for this source/destination
                 connection."
        ::= { sfpsConnectionEntry 1 }

sfpsConnectionSource    OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "The source SFPS address for this source/destination
                 connection." 
        ::= { sfpsConnectionEntry 2 }

sfpsConnectionPrimInPort        OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Identifies the primary inbound SFPS switch port."
        ::= { sfpsConnectionEntry 3 }

sfpsConnectionPrimOutPort       OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Identifies the primary outbound SFPS switch port.  All switched
                 traffic for this connection will be transmitted on 
                 this outbound port."
        ::= { sfpsConnectionEntry 4 }

sfpsConnectionSecInPort OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Identifies the secondaryinbound SFPS switch port."
        ::= { sfpsConnectionEntry 5 }

sfpsConnectionSecOutPort        OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Identifies the secondary outbound SFPS switch port.  All switched
                 traffic for this connection will be transmitted on 
                 this outbound port."
        ::= { sfpsConnectionEntry 6 }

sfpsConnectionCtrlStatus        OBJECT-TYPE
        SYNTAX  INTEGER
                {
                        other(1),
                        activate(2),
                        delete(3),
                        under-creation(4)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION     
                "The control state of the SFPS connection."
        ::= { sfpsConnectionEntry 7 }

sfpsConnectionAdminStatus       OBJECT-TYPE
        SYNTAX  INTEGER
                {
                        other(1),
                        disabled(2),
                        enabled(3)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION     
                "The administrative state of the SFPS connection."

        ::= { sfpsConnectionEntry 8 }

sfpsConnectionAge       OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Indicates the age of the connection."
        ::= { sfpsConnectionEntry 9 }

sfpsConnectionType      OBJECT-TYPE
        SYNTAX  INTEGER
                {
                        filter(1),
                        provisioned(2),
                        switched(3),
                        netport-filter(4),
                        self-prog-non-filter(5),
                        vlan(6),
                        tap(7),
                        mcast(8)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Sets the type of connection.  Provisioned connections are
                 setup manually; switched and vlan connections are setup
                 dynammically."
        ::= { sfpsConnectionEntry 10 }

sfpsConnectionPkts      OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Indicates the total number of packets sent on this connection."
        ::= { sfpsConnectionEntry 11 }

sfpsConnectionBytes     OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Indicates the total number of bytes sent on this connection."
        ::= { sfpsConnectionEntry 12 }

sfpsConnectionCanAge    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                ""
        ::= { sfpsConnectionEntry 13 }

sfpsConnectionPrimOutPorts      OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Identifies a list of outbound SFPS switch ports.  All
                 switched traffic for this connection will be transmitted 
                 on these outbound ports."
        ::= { sfpsConnectionEntry 14 }

sfpsConnectionSecOutPorts       OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Identifies a list of outbound SFPS switch ports.  All
                 switched traffic for this connection will be transmitted 
                 on these outbound ports."
        ::= { sfpsConnectionEntry 15 }


 

--  SFPS Connection API

sfpsAPIVerb    OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),       --  none of the following
                        map(2),         --  add a connection mapping
                        unmap(3),       --  remove aconnection mapping
                        unmapall(4)     --  remove all mappings
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Specifies the action to be initiated as a result of setting
                this leaf."
        DEFVAL { map }
        ::= { sfpsConnectionAPI 1 }


sfpsAPIInPort     OBJECT-TYPE
        SYNTAX  SfpsSwitchPort
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                "Specifies the ingress port of the switch."
        ::= { sfpsConnectionAPI 2 }


sfpsAPIInHeaderType     OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),             --  none of the following
                        mac-da-sa(2),         --  SFPS DA/SA MAC addresses
                        atm-vpi-vci(3)       --  ATM VCI/VCI header
                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Specfies the type of header being mapped."
        DEFVAL { mac-da-sa }
        ::= { sfpsConnectionAPI 3 }


sfpsAPIInHeaderLength  OBJECT-TYPE
        SYNTAX  INTEGER(1..12) 
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Specifies the length of the header value."
        DEFVAL { 12 }
        ::= { sfpsConnectionAPI 4 }


sfpsAPIInHeaderValue  OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Specifies the actual inHeader value for the mapping."
        ::= { sfpsConnectionAPI 5 }


sfpsAPIOutPort          OBJECT-TYPE
        SYNTAX  SfpsSwitchPort
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                "Specifies the egress port of the switch."
        ::= { sfpsConnectionAPI 6 }


sfpsAPIOutHeaderType    OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),             --  none of the following
                        mac-da-sa(2),         --  SFPS DA/SA MAC addresses
                        atm-vpi-vci(3)       --  ATM VCI/VCI header
                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Specfies the type of header being mapped.  This value
                 defaults to the value given to sfpsAPIInHeaderType."
        ::= { sfpsConnectionAPI 7 }


sfpsAPIOutHeaderLength  OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Specifies the length of the header value.  This value
                 defaults to the value given to sfpsAPIInHeaderLength."
        ::= { sfpsConnectionAPI 8 }


sfpsAPIOutHeaderValue  OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Specifies the actual outHeader value for the mapping.
                 This value defaults to the value given to
                 sfpsAPIInHeaderValue."
        ::= { sfpsConnectionAPI 9 }


sfpsAPIArgumentDirection  OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),               -- none of the following
                        bi-directional(2),      -- both ways valid
                        uni-directional(3)      -- one-way only
                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Specifies the direction of the connection."
        DEFVAL { bi-directional }
        ::= { sfpsConnectionAPI 10 }


sfpsAPIArgumentOwner  OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),               -- none of the following
                        own-the-call(2),        -- own call control
                        dont-own-the-call(3)    -- do not own call control
                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Specifies whether or not callcontrol is owned by this
                 agent switch.  If the call is owned, then the switch will
                 be responsible for releasing the call.  THis is used
                 mainly when transferring call ownership in call re-routing
                 and in setting up originating calls."
        DEFVAL { dont-own-the-call }
        ::= { sfpsConnectionAPI 11 }

sfpsAPIArgumentPriority  OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),               -- none of the following
                        priority-1(2),          -- 
                        priority-2(3),          -- 
                        priority-3(4),          --
                        priority-4(5),          --
                        priority-5(6)           --
                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Specifies the outbound priority of the connection."
        DEFVAL { other }
        ::= { sfpsConnectionAPI 12 }

sfpsAPIType OBJECT-TYPE
        SYNTAX INTEGER {
                        other(1),
                        switched(2),
                        filtered(3),
                        provisioned(4)
                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Sets the type of connection that should be setup."
        DEFVAL { switched }
        ::= { sfpsConnectionAPI 13 }

 
-- Connection Stats MO

sfpsConnectionStatsMaxCnxs      OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The maximum number of bi-directional connections allocated 
                for the switch."
        ::= { sfpsConnectionStats 1 }

sfpsConnectionStatsTotalCnxs    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of bi-directional connections used in
                the switch."
        ::= { sfpsConnectionStats 2 }

sfpsConnectionStatsSwitchedCnxs OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of bi-directional connections used in the switch
                with type <switched>"
        ::= { sfpsConnectionStats 3 }

sfpsConnectionStatsVlanCnxs     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of bi-directional connections used in the switch
                with type <VLAN>"
        ::= { sfpsConnectionStats 4 }

sfpsConnectionStatsFilterCnxs   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of bi-directional connections used in the switch
                with type <Filter>"
        ::= { sfpsConnectionStats 5 }

sfpsConnectionStatsSelfProgCnxs OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of bi-directional connections used in the switch
                with type <self Programmed Connections>"
        ::= { sfpsConnectionStats 6 }

sfpsConnectionStatsProvsnedCnxs OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of bi-directional connections used in the switch
                with type <provisioned>"
        ::= { sfpsConnectionStats 7 }

sfpsConnectionStatsTapCnxs      OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of bi-directional connections used in the switch
                with type <tap>"
        ::= { sfpsConnectionStats 8 }

sfpsConnectionStatsMcastCnxs    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of bi-directional connections used in the switch
                with type <multicast>"
        ::= { sfpsConnectionStats 9 }

sfpsConnectionStatsNetPortFilterCnxs    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of bi-directional connections used in the switch
                with type <network port filter connections>"
        ::= { sfpsConnectionStats 10 }

sfpsConnectionStatsNonCriticalVlans     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Number of non-critical connections - these will be aged first"
        ::= { sfpsConnectionStats 11 }

sfpsConnectionStatsAddErrors    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Number of errors on adding a connnection"
        ::= { sfpsConnectionStats 12 }

sfpsConnectionStatsDeleteErrors OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Number of errors on deleting a connection"
        ::= { sfpsConnectionStats 13 }


 
-- Connection Test API

sfpsConnectionTestAPIVerb       OBJECT-TYPE
        SYNTAX  INTEGER {
                        fillTable(1),
                        reapAllCnxs(2),
                        reapCnxsGivenMac(3),
                        reapCnxsGivenPort(4)

        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsConnectionTestAPI 1 }

sfpsConnectionTestAPIType       OBJECT-TYPE
        SYNTAX  INTEGER {
                        filter(1),
                        provisioned(2),
                        switched(3),
                        netport-filter(4),
                        self-prog-non-filter(5),
                        vlan(6),
                        tap(7),
                        mcast(8)
        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsConnectionTestAPI 2 }

sfpsConnectionTestAPINumCnxs     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                ""
        ::= { sfpsConnectionTestAPI 3 }


sfpsConnectionTestAPIMacAddr     OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                ""
        ::= { sfpsConnectionTestAPI 4 }

sfpsConnectionTestAPIPort           OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                ""
        ::= { sfpsConnectionTestAPI 5 }

 
--  SFPS Connection Config API

sfpsConnectionConfigAPIVerb    OBJECT-TYPE
        SYNTAX  INTEGER {
                        agePartial(1),
                        ageFull(2),
                        setParameter(3),
                        ageFilters(4),
                        stopAging(5)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Specifies the verb."
        ::= { sfpsConnectionConfigAPI 1 }


sfpsConnectionConfigAPICnxHiMark     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                "Specifies the percentage of the Connection Table needed
                 to be full before beginning aging."
        DEFVAL { 95 }
        ::= { sfpsConnectionConfigAPI 2 }

sfpsConnectionConfigAPICnxNumToAge     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                "Specifies the number of connections to age at each pass."
        DEFVAL { 100 }
        ::= { sfpsConnectionConfigAPI 3 }

sfpsConnectionConfigAPIAgePeriod    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Specifies the age period.  Units in minutes. 0 - No periodic aging
                 N - age every N minutes"
        DEFVAL { 0 }
        ::= { sfpsConnectionConfigAPI 4 }

sfpsConnectionConfigAPIAgePassInProgress     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Specifies whether the age pass is in progress.  0 - not aging now
                 1 - aging now."
        ::= { sfpsConnectionConfigAPI 5 }

sfpsConnectionConfigAPICurCapacity     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Specifies the percentage of the Connection Table used."
        ::= { sfpsConnectionConfigAPI 6 }

sfpsConnectionConfigAPILastPassTime     OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Specifies the time that the last age pass occured."
        ::= { sfpsConnectionConfigAPI 7 }

sfpsConnectionConfigAPITimeSinceLastPass     OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Specifies the time since the last age pass."
        ::= { sfpsConnectionConfigAPI 8 }

sfpsConnectionConfigAPIAgePassDelta     OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Specifies the time between the last two age passes."
        ::= { sfpsConnectionConfigAPI 9 }

sfpsConnectionConfigAPIAgePassCount     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Specifies the number of aging passes that have occured."
        ::= { sfpsConnectionConfigAPI 10 }

sfpsConnectionConfigAPIAgeStatsHiMark     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                ""
        ::= { sfpsConnectionConfigAPI 11 }

sfpsConnectionConfigAPIStatsAgingEnable     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                ""
        ::= { sfpsConnectionConfigAPI 12 }

sfpsConnectionConfigAPIAgeStatsAgingSupported    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                ""
        ::= { sfpsConnectionConfigAPI 13 }

sfpsConnectionConfigAPIIdleCnxs     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                ""
        ::= { sfpsConnectionConfigAPI 14 }

sfpsConnectionConfigAPIActiveCnxs     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                ""
        ::= { sfpsConnectionConfigAPI 15 }

 
--  SFPS Connection Query API

sfpsConnectionQueryAPIVerb    OBJECT-TYPE
        SYNTAX  INTEGER {
                        lookup(1),
                        add(2),
                        delete(3),
                        mapPort(4),
                        unmapPort(5),
                        reapCnxsGivenMac(6),
            mapPorts(7),
                        unMapPorts(8)

                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Specifies the action to be initiated as a result of setting
                 this leaf."
        ::= { sfpsConnectionQueryAPI 1 }


sfpsConnectionQueryAPIDestAddr     OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                "Destination MAC address."
        ::= { sfpsConnectionQueryAPI 2 }


sfpsConnectionQueryAPISourceAddr     OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                "Source MAC address."
        ::= { sfpsConnectionQueryAPI 3 }


sfpsConnectionQueryAPIInPort     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                "Source port number."
        ::= { sfpsConnectionQueryAPI 4 }


sfpsConnectionQueryAPIOutPort     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                "Destination port number."
        ::= { sfpsConnectionQueryAPI 5 }

sfpsConnectionQueryAPICtrlStatus    OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),
                        activate(2),
                        delete(3),
                        under-creation(4)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Control Status"
        ::= { sfpsConnectionQueryAPI 6 }

sfpsConnectionQueryAPIAdminStatus    OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),
                        disabled(2),
                        enabled(3)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Administrative Status."
        ::= { sfpsConnectionQueryAPI 7 }

sfpsConnectionQueryAPIAge     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Age of connection."
        ::= { sfpsConnectionQueryAPI 8 }

sfpsConnectionQueryAPIQueryType    OBJECT-TYPE
        SYNTAX  INTEGER {
                        filter(1),
                        provisioned(2),
                        switched(3),
                        netport-filter(4),
                        self-prog-non-filter(5),
                        vlan(6),
            tap(7),
                        mcast(8)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Type of connection."
        ::= { sfpsConnectionQueryAPI 9 }

sfpsConnectionQueryAPIOwner    OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Specifies whether or not Call control is owned by this agent
                 switch.  If the call is owned, then the switch
                 will be responsible for releasing the call.  This is
                 used mainly when transferring call ownership in call 
                 re-routing and in setting up originating calls."
        ::= { sfpsConnectionQueryAPI 10 }

sfpsConnectionQueryAPIPkts     OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Number of packets switched on this connection."
        ::= { sfpsConnectionQueryAPI 11 }

sfpsConnectionQueryAPIBytes     OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Number of bytes switched on this connection."
        ::= { sfpsConnectionQueryAPI 12 }

sfpsConnectionQueryAPICanAge     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Determine if this connection will be aged - (1) means to age."
        ::= { sfpsConnectionQueryAPI 13 }

sfpsConnectionQueryAPIOutPorts     OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                "If OutPorts is 1 - the multiple outports will be displayed in
                 a text format."
        ::= { sfpsConnectionQueryAPI 14 }

sfpsConnectionQueryAPIMacAddr     OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                "MAC address."
        ::= { sfpsConnectionQueryAPI 15 }

sfpsConnectionQueryAPISecInPort     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                ""
        ::= { sfpsConnectionQueryAPI 16 }

sfpsConnectionQueryAPISecOutPort     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                ""
        ::= { sfpsConnectionQueryAPI 17 }

sfpsConnectionQueryAPISecOutPorts     OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                ""
        ::= { sfpsConnectionQueryAPI 18 }


 
--  SFPS Connection Lookup API

sfpsConnectionLookupAPIVerb    OBJECT-TYPE
        SYNTAX  INTEGER {
--                      other(0),
                        getEntry(1)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Specifies the action to be initiated as a result of setting
                 this leaf."
        ::= { sfpsConnectionLookupAPI 1 }


sfpsConnectionLookupAPIMacAddr     OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION  
                "MAC address to be looked up as either the Source or Destination addresses."
        ::= { sfpsConnectionLookupAPI 2 }

sfpsConnectionLookupAPIDestAddr     OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Destination MAC address"
        ::= { sfpsConnectionLookupAPI 3 }

sfpsConnectionLookupAPISourceAddr     OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Source MAC address"
        ::= { sfpsConnectionLookupAPI 4 }

sfpsConnectionLookupAPIPrimInPort     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Source port number"
        ::= { sfpsConnectionLookupAPI 5 }

sfpsConnectionLookupAPIPrimOutPort     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Destination port number.  If -1, denotes multiple out ports."
        ::= { sfpsConnectionLookupAPI 6 }

sfpsConnectionLookupAPISecInPort     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Source port number"
        ::= { sfpsConnectionLookupAPI 7 }

sfpsConnectionLookupAPISecOutPort     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Destination port number.  If 01, denotes multiple out ports"
        ::= { sfpsConnectionLookupAPI 8 }

sfpsConnectionLookupAPICtrlStatus     OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),
                        activate(2),
                        delete(3),
                        under-creation(4)
        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Control status"
        ::= { sfpsConnectionLookupAPI 9 }

sfpsConnectionLookupAPIAdminStatus     OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),
                        disabled(2),    
                        enabled(3)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Administrative status"
        ::= { sfpsConnectionLookupAPI 10 }

sfpsConnectionLookupAPIAge     OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Age of connection"
        ::= { sfpsConnectionLookupAPI 11 }

sfpsConnectionLookupAPIType     OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                provisioned(2),
                switched(3),
                self-prog-filter(4),
                self-prog-non-filter(5),
                vlan(6),
                tap(7),
                mcast(8),
                flood(9)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Type of connection"
        ::= { sfpsConnectionLookupAPI 12 }

sfpsConnectionLookupAPIPkts     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Number of packets switched on this connection"
        ::= { sfpsConnectionLookupAPI 13 }

sfpsConnectionLookupAPIBytes     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Number of bytes switched on this connection"
        ::= { sfpsConnectionLookupAPI 14 }

sfpsConnectionLookupAPICanAge     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "Boolean to determine if this connection will be aged.  True (1) means to age."
        ::= { sfpsConnectionLookupAPI 15 }

sfpsConnectionLookupAPIPrimOutPorts     OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "If Primary OutPort is -1, the multiple outports will be displayed in text format"
        ::= { sfpsConnectionLookupAPI 16 }

sfpsConnectionLookupAPISecOutPorts     OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
                "If Secondary OutPort is -1, the multiple outports will be displayed in text format"
        ::= { sfpsConnectionLookupAPI 17 }


--

sfpsCNXPacketStatsVer1Tx    OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Version 1 transmission"
        ::= { sfpsCNXPacketStats 1 }

sfpsCNXPacketStatsVer2Tx    OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Version 2 transmission"
        ::= { sfpsCNXPacketStats 2 }

sfpsCNXPacketStatsVer1Rx    OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Version 1 receive"
        ::= { sfpsCNXPacketStats 3 }

sfpsCNXPacketStatsVer2Rx    OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Version 2 receive"
        ::= { sfpsCNXPacketStats 4 }

sfpsCNXPacketStatsOpCode1Tx    OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Operation code 1 transmission"
        ::= { sfpsCNXPacketStats 5 }

sfpsCNXPacketStatsOpCode2Tx    OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Operation code 2 tranmission"
        ::= { sfpsCNXPacketStats 6 }

sfpsCNXPacketStatsOpCode1Rx    OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Operation code 1 receive"
        ::= { sfpsCNXPacketStats 7 }

sfpsCNXPacketStatsOpCode2Rx    OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Operation code 2 receive"
        ::= { sfpsCNXPacketStats 8 }

sfpsCNXPacketStatsRxErrors    OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Receive errors"
        ::= { sfpsCNXPacketStats 9 }

END