CTRON-SFPS-ESYS-MIB device MIB details by Enterasys Networks Inc

CTRON-SFPS-ESYS-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CTRON-SFPS-ESYS-MIB.

Vendor:	Enterasys Networks Inc
Mib:	CTRON-SFPS-ESYS-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

CTRON-SFPS-ESYS-MIB DEFINITIONS ::= BEGIN

--  sfps-esys.mib.txt
--  Revision: 0.0.17
--              
--  Cabletron Systems, Inc.
--  35 Industria Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com

--  This module provides authoritative definitions for Cabletron's
--  enterprise specific Fast Packet Switching MIB.
--
--  This module will be extended, as required.
--

--  Cabletron Systems reserves the right to make changes in
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.
--  Copyright October 93 Cabletron Systems
--

 
IMPORTS
      OBJECT-TYPE
                FROM RFC-1212
      DisplayString
                FROM RFC1213-MIB
--      enterprises, 
        IpAddress, 
        Counter, TimeTicks
--        Gauge
                FROM RFC1155-SMI

--  These Objects are defined in the file sfps-inc.mib.txt.0.0.1
        sfpsSystemConfig, sfpsSystemStats, sfpsATMResolver, sfpsSystemPool,
    sfpsATMAnibIfoStats, sfpsMemHeapStats, sfpsATMResolverCounters,
    sfpsATMPorts, sfpsATMPortsMgr, sfpsATMElan, sfpsATMSvcHistoryMgr,
    sfpsATMSvcHistoryEvent


                FROM CTRON-SFPS-INCLUDE-MIB;
 
--  Textual Conventions

HexInteger ::= INTEGER
--  display this integer in hex format

SfpsSwitchInstance ::= INTEGER
--  this will map to chassis.module index value

--SfpsSwitchPort ::= INTEGER
--  this will map to chassis.module.portgroup.portsubgroup.port index value

SfpsAddress ::= OCTET STRING (SIZE (6))
--  this will map to a MAC address

--

--  SFPS Switch Engine System Group
--  This group contains the objects that pertain to SFPS switching
--  engines at a SFPS switch module single-instance level.  This group 
--  contains two sub-groups:  configuration and statistics.

sfpsSysConfigTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsSysConfigEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table contains the configuration and aministrative
                 information of each SFPS instance.  Essentially, a
                 separate SFPS instance exists for each switch module.
                 If SFPS is not configured on a module, than an entry
                 will not exist." 
        ::= { sfpsSystemConfig 1 }

sfpsSysConfigEntry    OBJECT-TYPE
        SYNTAX  SfpsSysConfigEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry specifies the SFPS configuration for the
                 SFPS instance."
        INDEX   { sfpsSysConfigSwitchInstance }
        ::= { sfpsSysConfigTable 1 }

SfpsSysConfigEntry ::=

        SEQUENCE {
                sfpsSysConfigSwitchInstance             INTEGER,
                sfpsSysConfigAdminStatus                INTEGER,
                sfpsSysConfigAdminReset                 INTEGER,
                sfpsSysConfigOperStatus                 INTEGER,
                sfpsSysConfigOperTime                   TimeTicks,
                sfpsSysConfigLastChange                 TimeTicks,
                sfpsSysConfigVersion                    DisplayString,
                sfpsSysConfigMIBRev                     DisplayString,
                sfpsSysConfigHostMgmtPort               INTEGER,
                sfpsSysConfigHostCtrlPort               INTEGER,
                sfpsSysConfigHostDataPort               INTEGER,
                sfpsSysConfigHostCtrlThrottleCount      INTEGER,
                sfpsSysConfigHostDataThrottleCount      INTEGER,
                sfpsSysConfigTrunkSwitch                INTEGER,
                sfpsSysConfigSwitchMode                 INTEGER,
                sfpsSysConfigSwitchMAC                  SfpsAddress,
                sfpsSysConfigMgmtAccessType             INTEGER,
                sfpsSysConfigChassisMAC                 SfpsAddress,
                sfpsSysConfigChassisIP                  IpAddress
                }

sfpsSysConfigSwitchInstance     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Switch Identifier to designate the instance of this entry."
         ::= { sfpsSysConfigEntry 1 }

sfpsSysConfigAdminStatus        OBJECT-TYPE
        SYNTAX  INTEGER
                {
                other (1),
                disabled (2),
                enabled (3)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION     
                "The administrative status of the switch."
         ::= { sfpsSysConfigEntry 2 }

sfpsSysConfigAdminReset OBJECT-TYPE
        SYNTAX  INTEGER
                {
                other (1),
                reset (2)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION     
                "Setting reset will cause a soft reset of the switch."
         ::= { sfpsSysConfigEntry 3 }

sfpsSysConfigOperStatus OBJECT-TYPE
        SYNTAX  INTEGER
                {
                other (1),
                disabled (2),
                enabled (3),
                pending-disable (4),
                pending-enable (5),
                invalid-config (6)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Displays the operational status of the switch."
         ::= { sfpsSysConfigEntry 4 }

sfpsSysConfigOperTime   OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Displays the operation uptime of the switch."
         ::= { sfpsSysConfigEntry 5 }

sfpsSysConfigLastChange OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Displays the number of time ticks since the last operational
                status change."
         ::= { sfpsSysConfigEntry 6 }

sfpsSysConfigVersion    OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Displays the version of this image."
         ::= { sfpsSysConfigEntry 7 }

sfpsSysConfigMIBRev     OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Displays the MIB version of the Engine component."
         ::= { sfpsSysConfigEntry 8 }

sfpsSysConfigHostMgmtPort       OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION     
                "Displays the Host Management port."
         ::= { sfpsSysConfigEntry 9 }

sfpsSysConfigHostCtrlPort       OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Displays the logical port number for the Host Control Port.
                The Host Control Port is the port that unknown packets are
                sent to for call processing."
         ::= { sfpsSysConfigEntry 10 }

sfpsSysConfigHostDataPort       OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                ""
         ::= { sfpsSysConfigEntry 11 }

sfpsSysConfigHostCtrlThrottleCount      OBJECT-TYPE
                SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                ""
         ::= { sfpsSysConfigEntry 12 }

sfpsSysConfigHostDataThrottleCount      OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                ""
         ::= { sfpsSysConfigEntry 13 }

sfpsSysConfigTrunkSwitch        OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION     
                ""
         ::= { sfpsSysConfigEntry 14 }

sfpsSysConfigSwitchMode OBJECT-TYPE
        SYNTAX  INTEGER
                {
                vNET (1),
                vLAN (2),
                aNVLLobo (3),
                aNVLFrontEnd (4)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION     
                "Displays the mode that the switch is running."
         ::= { sfpsSysConfigEntry 20 }

sfpsSysConfigSwitchMAC  OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Displays the Switch's Base MAC address."
         ::= { sfpsSysConfigEntry 21 }

sfpsSysConfigMgmtAccessType     OBJECT-TYPE
        SYNTAX  INTEGER
                {
                mgmt-Only (1),
                mgmt-and-Access (2)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION     
                "Determines whether the port can be used for management only
                or to be also used as an Access port."
         ::= { sfpsSysConfigEntry 22 }

sfpsSysConfigChassisMAC OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                ""
         ::= { sfpsSysConfigEntry 23 }

sfpsSysConfigChassisIP  OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                ""
         ::= { sfpsSysConfigEntry 24 }


 --

--  SFPS Switch Statistics Group
--  This group contains the objects that pertain to the performance
--  monitoring and statistics of a single instance of an SFPS switch.

sfpsSysStatsTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsSysStatsEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table contains the statistics information fo
                 each SFPS switch instance.  Essentially, a separate
                 SFPS instance exists for each switch module.  If SFPS
                 is not configured on a module, than an entry will not
                 exist." 
        ::= { sfpsSystemStats 1 }

sfpsSysStatsEntry    OBJECT-TYPE
        SYNTAX  SfpsSysStatsEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry contains the SFPS statistics for the SFPS
                instance."
        INDEX   { sfpsSysStatsSwitchInstance }
        ::= { sfpsSysStatsTable 1 }

SfpsSysStatsEntry ::=
        SEQUENCE {
                sfpsSysStatsSwitchInstance      SfpsSwitchInstance,
                sfpsSysStatsAdminStatus         INTEGER,
                sfpsSysStatsReset               INTEGER,
                sfpsSysStatsOperTime            TimeTicks,
                sfpsSysStatsInPkts              Counter,
                sfpsSysStatsOutPkts             Counter,
                sfpsSysStatsDiscardPkts         Counter,
                sfpsSysStatsFilteredPkts        Counter,
                sfpsSysStatsInOctets            Counter,
                sfpsSysStatsOutOctets           Counter,
                sfpsSysStatsDiscardOctets       Counter,
                sfpsSysStatsFilteredOctets      Counter
--  Do we need to count redirect bcast and unknown dest packets/bytes ?

        }

sfpsSysStatsSwitchInstance    OBJECT-TYPE
        SYNTAX  SfpsSwitchInstance
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The primary index to the SFPS switch table.  This
                 identifies the SFPS switch for which the entry
                 exists." 
        ::= { sfpsSysStatsEntry 1 }

sfpsSysStatsAdminStatus  OBJECT-TYPE
        SYNTAX          INTEGER {
                            other(1),
                            disabled(2),
                            enabled(3)
                        }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Sets the administrative state of the SFPS switch
                 statistics.  Writing a value of enabled(3) causes
                 these counters to become active for this SFPS switch
                 instance.  Writing a value of disabled(2) causes
                 these counters to become inactive for this SFPS
                 switch instance." 
        ::= { sfpsSysStatsEntry 2 }

sfpsSysStatsReset        OBJECT-TYPE
        SYNTAX          INTEGER {
                            other(1),
                            reset(2)
                        }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Resets the SFPS switch counters for this SFPS switch
                 instance. Writing a value of reset(2) resets the SFPS
                 switch counters to 0 and causes sfpsSysStatsOperTime
                 to also be reset to 0." 
        ::= { sfpsSysStatsEntry 3 }

sfpsSysStatsOperTime       OBJECT-TYPE
        SYNTAX          TimeTicks
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the amount of time (# of time ticks) that
                 the SFPS switch statistics have been active for this
                 SFPS swtich instance."
        ::= { sfpsSysStatsEntry 4 }

sfpsSysStatsInPkts       OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of SFPS packets that have
                 been received, on this SFPS switch instance, during
                 the time of sfpsSysStatsOperTime."
        ::= { sfpsSysStatsEntry 5 }

sfpsSysStatsOutPkts      OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of SFPS packets that have
                 been switched, on this SFPS switch instance, during
                 the time of sfpsSysStatsOperTime." 
        ::= { sfpsSysStatsEntry 6 }

sfpsSysStatsDiscardPkts  OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of SFPS packets that have
                 been discarded, on this SFPS switch instance, during
                 the time of sfpsSysStatsOperTime."
        ::= { sfpsSysStatsEntry 7 }

sfpsSysStatsFilteredPkts  OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of SFPS packets that have
                 been filtered, on this SFPS switch instance, during
                 the time of sfpsSysStatsOperTime."
        ::= { sfpsSysStatsEntry 8 }

sfpsSysStatsInOctets       OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of SFPS octets that have
                 been received, on this SFPS switch instance, during
                 the time of sfpsSysStatsOperTime."
        ::= { sfpsSysStatsEntry 9 }

sfpsSysStatsOutOctets      OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of SFPS octets that have
                 been switched, on this SFPS switch instance, during
                 the time of sfpsSysStatsOperTime."
        ::= { sfpsSysStatsEntry 10 }

sfpsSysStatsDiscardOctets  OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of SFPS octets that have
                 been discarded, on this SFPS switch instance, during
                 the time of sfpsSysStatsOperTime."
        ::= { sfpsSysStatsEntry 11 }

sfpsSysStatsFilteredOctets  OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of SFPS octets that have
                 been filtered, on this SFPS switch instance, during
                 the time of sfpsSysStatsOperTime."
        ::= { sfpsSysStatsEntry 12 }


-- vcc port table

sfpsVccPortTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsVccPortEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMElan 6 }

sfpsVccPortEntry    OBJECT-TYPE
        SYNTAX  SfpsVccPortEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                ""
        INDEX   { sfpsVccPortLogPort }
        ::= { sfpsVccPortTable 1 }

SfpsVccPortEntry ::=
        SEQUENCE {
                sfpsVccPortLogPort                      INTEGER,
                sfpsVccPortPhyPort                      INTEGER,
                sfpsVccPortVpi                          INTEGER,
                sfpsVccPortVci                          INTEGER,
                sfpsVccPortPortType                     INTEGER,
                sfpsVccPortLogPortType          INTEGER,
                sfpsVccPortPhyLinkState         INTEGER
                                }

sfpsVccPortLogPort    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsVccPortEntry 1 }

sfpsVccPortPhyPort    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsVccPortEntry 2 }

sfpsVccPortVpi    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsVccPortEntry 3 }

sfpsVccPortVci    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsVccPortEntry 4 }

sfpsVccPortPortType    OBJECT-TYPE
        SYNTAX  INTEGER {
                        atmLec(1),
                        atmSvc(2),
                        atmPvc(3),
                        other(4)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsVccPortEntry 5 }

sfpsVccPortLogPortType    OBJECT-TYPE
        SYNTAX  INTEGER {
                        pendingUp(1),
                        portUp(2),
                        portDown(3),
                        other(4)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsVccPortEntry 6 }

sfpsVccPortPhyLinkState    OBJECT-TYPE
        SYNTAX  INTEGER {
                        linkUp(1),
                        linkDown(2),
                        other(3)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsVccPortEntry 7 }


--  ATM Resolve System

sfpsATMResolveSystemLearnTableSize    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolver 1 }

--  ATM Resolve Counters

sfpsATMResolveCountersVerb    OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),
                        reset(2)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 1 }

sfpsATMResolveCountersUptime    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 2 }

sfpsATMResolveCountersQueryMACReq    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 3 }

sfpsATMResolveCountersQueryMACFail    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 4 }

sfpsATMResolveCountersQueryMACGood    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 5 }

sfpsATMResolveCountersQueryMACDaSaChecks    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 6 }

sfpsATMResolveCountersQueryMACDaSaHits    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 7 }

sfpsATMResolveCountersQueryMACDaSaMissess    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 8 }

sfpsATMResolveCountersQueryMACVdirChecks    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 9 }

sfpsATMResolveCountersQueryMACVdirHits    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 10 }

sfpsATMResolveCountersQueryMACVdirMisses    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 11 }

sfpsATMResolveCountersQueryMACErrors    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 12 }

sfpsATMResolveCountersQueryMACLecPortSuppress    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 13 }

sfpsATMResolveCountersQueryMACStandbyDrops    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 14 }

sfpsATMResolveCountersQueryDaSaRequests    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 15 }

sfpsATMResolveCountersQueryDaSaHits    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 16 }

sfpsATMResolveCountersQueryDaSaMisses    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 17 }

sfpsATMResolveCountersQueryDaSaErrors    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolverCounters 18 }


--  ATM Resolve Diag API

sfpsATMResolveDiagAPIVerb    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolver 3 }

sfpsATMResolveDiagAPIInDA    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolver 8 }

sfpsATMResolveDiagAPIInSA    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolver 9 }

sfpsATMResolveDiagAPIInSrcLecPort    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolver 10 }

sfpsATMResolveDiagAPIOutStatus    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolver 11 }

sfpsATMResolveDiagAPIOutPort    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMResolver 12 }

-- Pool Table

sfpsPoolTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsPoolTableEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsSystemPool 1 }

sfpsPoolTableEntry    OBJECT-TYPE
        SYNTAX  SfpsPoolTableEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                ""
        INDEX   { sfpsPoolTableIndex }
        ::= { sfpsPoolTable 1 }

SfpsPoolTableEntry ::=
        SEQUENCE {
                sfpsPoolTableIndex                      INTEGER,
                sfpsPoolTableName                       DisplayString,
                sfpsPoolTableRAM                        INTEGER,
                sfpsPoolTableBlockSize          INTEGER,
                sfpsPoolTableBlockCount         INTEGER,
                sfpsPoolTableBlockMax           INTEGER,
                sfpsPoolTableObjSize            INTEGER,
                sfpsPoolTableObjInUse           INTEGER,
                sfpsPoolTableObjMax                     INTEGER,
                sfpsPoolTableObjInBlock         INTEGER
                                }

sfpsPoolTableIndex    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsPoolTableEntry 1 }

sfpsPoolTableName    OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsPoolTableEntry 2 }

sfpsPoolTableRAM    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsPoolTableEntry 3 }

sfpsPoolTableBlockSize    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsPoolTableEntry 4 }

sfpsPoolTableBlockCount    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsPoolTableEntry 5 }

sfpsPoolTableBlockMax    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsPoolTableEntry 6 }

sfpsPoolTableObjSize    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsPoolTableEntry 7 }

sfpsPoolTableObjInUse    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsPoolTableEntry 8 }

sfpsPoolTableObjMax    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsPoolTableEntry 9 }

sfpsPoolTableObjInBlock    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsPoolTableEntry 10 }

-- AnibIfo Stats

sfpsAnibIfoStatsTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsAnibIfoStatsTableEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMAnibIfoStats 1 }

sfpsAnibIfoStatsTableEntry    OBJECT-TYPE
        SYNTAX  SfpsAnibIfoStatsTableEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                ""
        INDEX   { sfpsAnibIfoStatsPhysIntf }
        ::= { sfpsAnibIfoStatsTable 1 }

SfpsAnibIfoStatsTableEntry ::=
        SEQUENCE {
                sfpsAnibIfoStatsPhysIntf        INTEGER,
                sfpsAnibIfoStatsCtrlMessages    INTEGER,
                sfpsAnibIfoStatsIlmiMessages    INTEGER,
                sfpsAnibIfoStatsUniMessages     INTEGER,
                sfpsAnibIfoStatsLaneMessages    INTEGER,
                sfpsAnibIfoStatsPCSPoolSize     INTEGER,
                sfpsAnibIfoStatsPCSPoolDrops    INTEGER,
                sfpsAnibIfoStatsPoolIlmiDrops   INTEGER,
                sfpsAnibIfoStatsPoolUniDrops    INTEGER,
                sfpsAnibIfoStatsPoolLaneDrops   INTEGER,
                sfpsAnibIfoStatsPCSAvail        INTEGER,
                sfpsAnibIfoStatsPCSInUse        INTEGER,
                sfpsAnibIfoStatsStandbyLeArpsDrops        INTEGER,
                sfpsAnibIfoStatsStandbyUnknownsDrops        INTEGER,
                sfpsAnibIfoStatsStandbyANIBUnknownsDrops        INTEGER
                                }

sfpsAnibIfoStatsPhysIntf    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAnibIfoStatsTableEntry 1 }

sfpsAnibIfoStatsCtrlMessages    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAnibIfoStatsTableEntry 2 }

sfpsAnibIfoStatsIlmiMessages  OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAnibIfoStatsTableEntry 3 }

sfpsAnibIfoStatsUniMessages    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAnibIfoStatsTableEntry 4 }

sfpsAnibIfoStatsLaneMessages    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAnibIfoStatsTableEntry 5 }

sfpsAnibIfoStatsPCSPoolSize    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAnibIfoStatsTableEntry 6 }

sfpsAnibIfoStatsPCSPoolDrops    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAnibIfoStatsTableEntry 7 }

sfpsAnibIfoStatsPoolIlmiDrops    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAnibIfoStatsTableEntry 8 }

sfpsAnibIfoStatsPoolUniDrops    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAnibIfoStatsTableEntry 9 }

sfpsAnibIfoStatsPoolLaneDrops    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAnibIfoStatsTableEntry 19 }

sfpsAnibIfoStatsPCSAvail    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAnibIfoStatsTableEntry 11 }

sfpsAnibIfoStatsPCSInUse    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAnibIfoStatsTableEntry 12 }

sfpsAnibIfoStatsStandbyLeArpsDrops    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAnibIfoStatsTableEntry 13 }

sfpsAnibIfoStatsStandbyUnknownsDrops    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAnibIfoStatsTableEntry 14 }

sfpsAnibIfoStatsStandbyANIBUnknownsDrops    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAnibIfoStatsTableEntry 15 }


--
-- This Table reserved for Memory Usage

sfpsMemHeapStatsHeapInit     OBJECT-TYPE
        SYNTAX  HexInteger
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsMemHeapStats 1 }

sfpsMemHeapStatsHeapMax     OBJECT-TYPE
        SYNTAX  HexInteger
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsMemHeapStats 2 }

sfpsMemHeapStatsHeapEnd     OBJECT-TYPE
        SYNTAX  HexInteger
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsMemHeapStats 3 }

sfpsMemHeapStatsHeapSize     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsMemHeapStats 4 }

sfpsMemHeapStatsFragCount     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsMemHeapStats 5 }

sfpsMemHeapStatsFragLargest     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsMemHeapStats 6 }

sfpsMemHeapStatsFragBytes     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsMemHeapStats 7 }

sfpsMemHeapStatsHeapUsed     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsMemHeapStats 8 }

sfpsMemHeapStatsHeapAvail     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsMemHeapStats 9 }

sfpsMemHeapStatsHeapUseMax     OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsMemHeapStats 10 }

sfpsMemHeapStatsHeapUsePercent     OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsMemHeapStats 11 }

--

sfpsATMPortsTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsATMPortsTableEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMPorts 1 }

sfpsATMPortsTableEntry    OBJECT-TYPE
        SYNTAX  SfpsATMPortsTableEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                ""
        INDEX   { sfpsATMPortsPhysIntf }
        ::= { sfpsATMPortsTable 1 }

SfpsATMPortsTableEntry ::=
        SEQUENCE {
                sfpsATMPortsPhysIntf         INTEGER,
                sfpsATMPortsTotalLECPorts    INTEGER,
                sfpsATMPortsTotalPVCPorts    INTEGER,
                sfpsATMPortsTotalSVCPorts    INTEGER,
                sfpsATMPortsBaseIntfNum      INTEGER,
                sfpsATMPortsInUse            INTEGER
                                }

sfpsATMPortsPhysIntf    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMPortsTableEntry 1 }

sfpsATMPortsTotalLECPorts    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMPortsTableEntry 2 }

sfpsATMPortsTotalPVCPorts    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMPortsTableEntry 3 }

sfpsATMPortsTotalSVCPorts    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMPortsTableEntry 4 }

sfpsATMPortsBaseIntfNum    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMPortsTableEntry 5 }

sfpsATMPortsInUse    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMPortsTableEntry 6 }

--

sfpsATMPortsMgrVerb    OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                set(2),
                setToDefaults(3),
                coldResetNV(4),
                warmResetNB(5)
        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMPortsMgr 1 }

sfpsATMPortsMgrPhysIntf    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMPortsMgr 2 }

sfpsATMPortsMgrTotalLECPorts    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMPortsMgr 3 }

sfpsATMPortsMgrTotalPVCPorts    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMPortsMgr 4 }

sfpsATMPortsMgrTotalSVCPorts    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMPortsMgr 5 }

sfpsATMPortsMgrVerbStatus    OBJECT-TYPE
        SYNTAX  INTEGER{
                ok(1),
                exceededMaxAllotment(2),
                badIf(3),
                error(4)
        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMPortsMgr 6 }

--

sfpsATMLecPortTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsATMLecPortTableEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMElan 7 }

sfpsATMLecPortTableEntry    OBJECT-TYPE
        SYNTAX  SfpsATMLecPortTableEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                ""
        INDEX   { sfpsATMLecPortLogPort }
        ::= { sfpsATMLecPortTable 1 }

SfpsATMLecPortTableEntry ::=
        SEQUENCE {
                sfpsATMLecPortLogPort         INTEGER,
                sfpsATMLecPortPhyPort         INTEGER,
                sfpsATMLecPortElanName        INTEGER,
                sfpsATMLecPortPhyLinkState    INTEGER,
                sfpsATMLecPortLECType         INTEGER
                                }

sfpsATMLecPortLogPort    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMLecPortTableEntry 1 }

sfpsATMLecPortPhyPort    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMLecPortTableEntry 2 }

sfpsATMLecPortElanName    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMLecPortTableEntry 3 }

sfpsATMLecPortPhyLinkState    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMLecPortTableEntry 4 }

sfpsATMLecPortLECType    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMLecPortTableEntry 5 }

--

sfpsATMSvcHistoryEventTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsATMSvcHistoryEventTableEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsATMSvcHistoryEvent 1 }

sfpsATMSvcHistoryEventTableEntry    OBJECT-TYPE
        SYNTAX  SfpsATMSvcHistoryEventTableEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                ""
        INDEX   { sfpsATMSvcHistoryEventIndex }
        ::= { sfpsATMSvcHistoryEventTable 1 }

SfpsATMSvcHistoryEventTableEntry ::=
        SEQUENCE {
                sfpsATMSvcHistoryEventIndex             INTEGER,
                sfpsATMSvcHistoryEventATMAddr           OCTET STRING,
                sfpsATMSvcHistoryEventPortNumber        INTEGER,
                sfpsATMSvcHistoryEventEvent             INTEGER,
                sfpsATMSvcHistoryEventEventChange       INTEGER,        
                sfpsATMSvcHistoryEventVccHand           INTEGER,
                sfpsATMSvcHistoryEventVpi               INTEGER,
                sfpsATMSvcHistoryEventVci               INTEGER,
                sfpsATMSvcHistoryEventTime              TimeTicks
                }

sfpsATMSvcHistoryEventIndex    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "incrementing value based on number of events" 
        ::= { sfpsATMSvcHistoryEventTableEntry 1 }

sfpsATMSvcHistoryEventATMAddr    OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "the atm address for the port manager port based on the lec
                 client mib." 
        ::= { sfpsATMSvcHistoryEventTableEntry 2 }


sfpsATMSvcHistoryEventPortNumber    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "port manager port" 
        ::= { sfpsATMSvcHistoryEventTableEntry 3 }


sfpsATMSvcHistoryEventEvent    OBJECT-TYPE
        SYNTAX  INTEGER {
                idle(1),
                opening(2),
                openResponse(3),
                peerOpenResponse(4),
                openAck(5),
                open(6),
                closeResponse(7),
                closeAck(8), 
                close(9),
                clean(10),
                cleanCloseResp(11),
                cleanCloseAck(12)
                        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "state change logged to the Event Log" 
        ::= { sfpsATMSvcHistoryEventTableEntry 4 }


sfpsATMSvcHistoryEventEventChange    OBJECT-TYPE
        SYNTAX  INTEGER {
                error(1),
                normal(2)
                        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "reason for the Event" 
        ::= { sfpsATMSvcHistoryEventTableEntry 5 }


sfpsATMSvcHistoryEventVccHand    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "value associated with a connection on Port Number" 
        ::= { sfpsATMSvcHistoryEventTableEntry 6 }


sfpsATMSvcHistoryEventVpi    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "vpi associated with connection on Port Number" 
        ::= { sfpsATMSvcHistoryEventTableEntry 7 }


sfpsATMSvcHistoryEventVci    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "vci associated with connection on Port Number" 
        ::= { sfpsATMSvcHistoryEventTableEntry 8 }


sfpsATMSvcHistoryEventTime    OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "system time when Event occurs" 
        ::= { sfpsATMSvcHistoryEventTableEntry 9 }


--
sfpsATMSvcHistoryMgrVerb    OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                resetSvcHistory(2),
                isableSvcLogging(3),
                enableSvcLogging(4),
                enableSvcLogsNoWrapping(5)
                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "allows you to reset the SvcHistoryEvent table
                 disable logging so no new entries are compiled in the
                 SvcHistoryEvent table enable logging so new entries are
                 added to the SvcHistoryEvent table enable logging in the
                 SvcHistoryEvent table so that when the max number of entries
                 is reached the table is full and doesn't wrap around and
                 continue adding entries" 
        ::= { sfpsATMSvcHistoryMgr 1 }


sfpsATMSvcHistoryMgrSvcHistoryWraps    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "displays if the table is going to wrap" 
        ::= { sfpsATMSvcHistoryMgr 2 }

sfpsATMSvcHistoryMgrLogState    OBJECT-TYPE
        SYNTAX  INTEGER {
                        enabled(1),
                        enabledNoWrap(2),
                        disabled(3)
                        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "displays whether the table is enabled to log new entries
                  or not and if it is enabled whether the table will wrap" 
        ::= { sfpsATMSvcHistoryMgr 3 }

sfpsATMSvcHistoryMgrEntriesCount    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "displays the number of current entries from the beginnning
                 of the table (not from before it wrapped)" 
        ::= { sfpsATMSvcHistoryMgr 4 }

END