ActiveXperts Network Monitor 2019##AdminFavorites

CTRON-SFPS-SFLSP-MIB by vendor Enterasys Networks Inc

CTRON-SFPS-SFLSP-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CTRON-SFPS-SFLSP-MIB.


Vendor: Enterasys Networks Inc
Mib: CTRON-SFPS-SFLSP-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
CTRON-SFPS-SFLSP-MIB DEFINITIONS ::= BEGIN

--  sfps-sflsp-mib.txt
--  Revision: 0.0.06
--
--  Cabletron Systems, Inc.
--  35 Industrial Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com
--
--  This module provides authoritative definitions for Cabletron's
--  enterprise specific Fast Packet Switching Services API MIB.
--
--  This module will be extended, as required.
--
--
--  Cabletron Systems reserves the right to make changes in
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.
--  Copyright October 93 Cabletron Systems
--

IMPORTS
      OBJECT-TYPE
                FROM RFC-1212
--      DisplayString
--                FROM RFC1213-MIB
--      enterprises,
        TimeTicks, 
        IpAddress,
        Counter,
        Gauge
                FROM RFC1155-SMI
 
--  These Objects are defined in the file sfps-inc.mib.txt.0.0.1
        vlanSflspGeneralVariables, vlanSflspLsdb, vlanSflspInterfaces,
        vlanSflspIfMetric, vlanSflspNeighbors, vlanSflspArea,
        vlanSflsp1stHop, vlanSflspTracePathAPI, vlanSflspTracePathInternal,
        vlanSflspLSDBFlood, vlanSflspLSPStats
                FROM CTRON-SFPS-INCLUDE-MIB; 
 
SfpsAddress ::= OCTET STRING (SIZE (6))
--  this will map to a MAC address
  

-- SFLSP


vlanSflspGeneralSwitchID    OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "A 10 byte octet string uniquely identifying the switch in the Switch Fabric.
                 By convention, to ensure uniqueness the first six bytes should default
                 to the base mac address and the last four bytes should default to zeroes."
        ::= { vlanSflspGeneralVariables 1 }


vlanSflspGeneralAdminStatus    OBJECT-TYPE
        SYNTAX  INTEGER  {
                        enabled(1),
                        disabled(2)
                          }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The administrative status of the SFLSP in the switch.  The value 'enabled' 
                 denotes that the SFLSP Process is active on at least one interface; 'disabled'
                 disables it on all interfaces. " 
        ::= { vlanSflspGeneralVariables 2 }

vlanSflspGeneralVersion      OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The current version number of the SFLSP protocol is 2 "
        ::= { vlanSflspGeneralVariables 3 }

vlanSflspGeneralAreaBRStatus     OBJECT-TYPE
        SYNTAX          INTEGER  {
                          true(1),
                          false(2)
                                 }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "A flag to note whether this switch is an area border switch "
        ::= { vlanSflspGeneralVariables 4 }

vlanSflspGeneralASBRStatus     OBJECT-TYPE
        SYNTAX          INTEGER  {
                                true(1),
                                false(2)
                                  }

        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "A flag to note whether this switch is an Autonomous System border switch. "
        ::= { vlanSflspGeneralVariables 5 }

vlanSflspGeneralTOSSupport     OBJECT-TYPE
        SYNTAX          INTEGER  {
                                        true(1),
                                        false(2)
                                 }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "The switch's support for type-of-service switching.  Currently, this
                 is set to false, indicating no type-of-service switching."
        ::= { vlanSflspGeneralVariables 6 }

vlanSflspGeneralOrgNewLSAs     OBJECT-TYPE
        SYNTAX          Counter 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Number of new link-state advertisements that have been originated.
                 This number is incremented each time the switch originates a new LSA."
        ::= { vlanSflspGeneralVariables 7 }

vlanSflspGeneralRcvNewLSAs     OBJECT-TYPE
        SYNTAX          Counter 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of link-state advertisements received determined to be new.
                 instantiations.  This number does not include newer instantiations of
                 self-originated link-state advertisements."
        ::= { vlanSflspGeneralVariables 8 }

vlanSflspGeneralMaxOnQueue     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Maximum number of events on the queue"
        ::= { vlanSflspGeneralVariables 9 }

vlanSflspGeneralCurOnQueue     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Current number of events on the queue"
        ::= { vlanSflspGeneralVariables 10 }

vlanSflspGeneralMaxTimeUs     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Maximum length of time to process events on the queue"
        ::= { vlanSflspGeneralVariables 11 }

vlanSflspGeneralCurTimeUs     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Current length of time to process events on the queue"
        ::= { vlanSflspGeneralVariables 12 }

vlanSflspGeneralMaxEvents     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Maximum number of events processed at once"
        ::= { vlanSflspGeneralVariables 13 }

vlanSflspGeneralMaxTimeOccurred     OBJECT-TYPE
        SYNTAX          TimeTicks 
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Maximum length of time occurred at this time"
        ::= { vlanSflspGeneralVariables 14 }

vlanSflspGeneralMaxOnQOccurred     OBJECT-TYPE
        SYNTAX          TimeTicks 
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Maximum number of events on the queue occurred at this time"
        ::= { vlanSflspGeneralVariables 15 }

vlanSflspGeneralTotalSwLinks     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Total number of switch links in our database"
        ::= { vlanSflspGeneralVariables 16 }

vlanSflspGeneralLastChangeDet     OBJECT-TYPE
        SYNTAX          TimeTicks 
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Timestamp of last run of spf due to change detected in topology "
        ::= { vlanSflspGeneralVariables 17 }

vlanSflspGeneralFloodMask    OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { vlanSflspGeneralVariables 18 }


vlanSflspGeneralLowestMac    OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { vlanSflspGeneralVariables 19 }


vlanSflspGeneralRootId    OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { vlanSflspGeneralVariables 20 }


vlanSflspGeneralFloodAdminStatus    OBJECT-TYPE
        SYNTAX  INTEGER {
                enabled(1),
                disabled(2)
        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { vlanSflspGeneralVariables 21 }


--LSDB

vlanSflspLsdbTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF VlanSflspLsdbEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "The SFLSP Process's Links State Database. "
        ::= { vlanSflspLsdb 1 }

vlanSflspLsdbEntry      OBJECT-TYPE
        SYNTAX  VlanSflspLsdbEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                " A single Link State Advertisement" 
        INDEX   { vlanSflspLsdbAreaID, vlanSflspLsdbType,
                  vlanSflspLsdbLSID, vlanSflspLsdbSwitchID  }
        ::= { vlanSflspLsdbTable 1 }

VlanSflspLsdbEntry ::=
        SEQUENCE {
                vlanSflspLsdbAreaID            INTEGER,
                vlanSflspLsdbType              INTEGER,
                vlanSflspLsdbLSID              OCTET STRING,
                vlanSflspLsdbSwitchID          OCTET STRING,
                vlanSflspLsdbSequence          INTEGER,
                vlanSflspLsdbAge               INTEGER,
                vlanSflspLsdbChecksum          INTEGER,
                vlanSflspLsdbAdvertisement     OCTET STRING,    
                vlanSflspLsdbUsedInSPF         INTEGER  
        }

 
vlanSflspLsdbAreaID     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The 32-bit identifier of the Area from which the LSA was received. "
        ::= { vlanSflspLsdbEntry 1 }

vlanSflspLsdbType     OBJECT-TYPE
        SYNTAX          INTEGER  {
                                switch-link(1),
                                connection-link(2)
                                  }
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The type of the link state advertisement.  Each link state type has a 
                 seperate advertisement format. "
        ::= { vlanSflspLsdbEntry 2 }

vlanSflspLsdbLSID     OBJECT-TYPE
        SYNTAX          OCTET STRING 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The Link State ID is an LS Type Specific field containing either
                 a switch ID or a switch port name; it identifies the piece of the
                 routing domain that is being described by the advertisement. "
        ::= { vlanSflspLsdbEntry 3 }

vlanSflspLsdbSwitchID     OBJECT-TYPE
        SYNTAX          OCTET STRING 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "A 10 byte octet string uniquely identifying the orignating switch in the Switch
                 Fabric.  By convention, to ensure uniqueness the first six bytes should default
                 to the base mac address and the last four bytes should default to zeroes."
        ::= { vlanSflspLsdbEntry 4 }

vlanSflspLsdbSequence     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The sequence number field is a signed 32-bit integer.
                 It is used to detect old and duplicate link state advertisements.
                 The space of sequence numbers is linearly ordered.  The larger the 
                 sequence numbers the more recent the advertisement. "
        ::= { vlanSflspLsdbEntry 5 }

vlanSflspLsdbAge     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "This field is the age of the link state advertisement in seconds ."
        ::= { vlanSflspLsdbEntry 6 }

vlanSflspLsdbChecksum     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "This field is the checksum of the complete contents of the advertisement,
                 excepting the age field.  The age field is excepted so that an advertisement's
                 age can be incremented without updating th checksum.  The checksum used is the 
                 same that is used for ISO connectionless datagrams;  it is commonly referred to
                 as the Fletcher checksum. "
        ::= { vlanSflspLsdbEntry 7 }

vlanSflspLsdbAdvertisement     OBJECT-TYPE
        SYNTAX          OCTET STRING 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The entire Link State Advertisement, including its header. "
        ::= { vlanSflspLsdbEntry 8 }

vlanSflspLsdbUsedInSPF     OBJECT-TYPE
        SYNTAX          INTEGER {
--              false(0),
                true(1)
        } 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                " "
        ::= { vlanSflspLsdbEntry 9 }

-- interfaces

vlanSflspInterfacesTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF VlanSflspInterfacesEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "The SFLSP Interface Table describes the interfaces from the
                 viewpoint of SFLSP. "
        ::= { vlanSflspInterfaces 1 }

vlanSflspInterfacesEntry      OBJECT-TYPE
        SYNTAX  VlanSflspInterfacesEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "The SFLSP Interfaces Entry describes one interface from the 
                 viewpoint of SFLSP " 
        INDEX   { vlanSflspInterfacesIFAddress, vlanSflspInterfacesSwAddressLess  }
        ::= { vlanSflspInterfacesTable 1 }

VlanSflspInterfacesEntry ::=
        SEQUENCE {
                vlanSflspInterfacesIFAddress               SfpsAddress,
                vlanSflspInterfacesSwAddressLess              INTEGER,
                vlanSflspInterfacesAreaID                     IpAddress,
                vlanSflspInterfacesIfType                     INTEGER,
                vlanSflspInterfacesAdminStatus                INTEGER,
                vlanSflspInterfacesSwPriority                INTEGER,
                vlanSflspInterfacesTransDelay                 INTEGER,
                vlanSflspInterfacesReTransInterval            INTEGER,
                vlanSflspInterfacesHelloInterval              INTEGER,
                vlanSflspInterfacesDeadInterval               INTEGER,
                vlanSflspInterfacesPollInterval               INTEGER,
                vlanSflspInterfacesState                      INTEGER,
                vlanSflspInterfacesDS                         SfpsAddress,
                vlanSflspInterfacesBDS                        SfpsAddress,
                vlanSflspInterfacesEvents                     Counter,
                vlanSflspInterfacesAuthKey                    SfpsAddress       
        }

vlanSflspInterfacesIFAddress     OBJECT-TYPE
        SYNTAX          SfpsAddress 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "A 10 byte octet string uniquely identifying the port address.
                 By convention, to ensure uniqueness the first six bytes should default
                 to the base mac address and the last four bytes should default to the
                 port number of the interface."
        ::= { vlanSflspInterfacesEntry 1 }

vlanSflspInterfacesSwAddressLess     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "For the purpose of easing the instancing of addressed and
                 addressless interfaces;  This variable takes the value 0 on
                 interfaces with IP Addresses, and the corresponding value of
                 ifIndex for interfaces having no IP Address. "
        ::= { vlanSflspInterfacesEntry 2 }

vlanSflspInterfacesAreaID     OBJECT-TYPE
        SYNTAX          IpAddress 
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "A 32-bit integer uniquely identifying the area to which the
                 interface connects.  Area ID 0.0.0.0 is used for the SFLSP backbone. "
        ::= { vlanSflspInterfacesEntry 3 }

vlanSflspInterfacesIfType     OBJECT-TYPE
        SYNTAX          INTEGER  {
                                brodcast(1),
                                nbma(2),
                                point-to-point(3)
                                 }
         
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "The SFLSP interface type.  Currently all interfaces are handled as
                 broadcast type. "
        ::= { vlanSflspInterfacesEntry 4 }

vlanSflspInterfacesAdminStatus     OBJECT-TYPE
        SYNTAX          INTEGER  {
                                enabled(1),
                                disabled(2)
                                 }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "The SFLSP interface's administrative status.  The value 'enabled'
                 denotes that neighbor relationships may be formed on the interface, and the
                 interface will be advertised as an internal route to some area.
                 The value 'disabled' denotes that the interface is external to SFLSP. "
        ::= { vlanSflspInterfacesEntry 5 }

vlanSflspInterfacesSwPriority     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "The priority of this interface.  Used in multi-access networks, this field
                 is used in the designated switch election algorithm.  By default all switches
                 are eligible with a priority of 1. "
        ::= { vlanSflspInterfacesEntry 6 }

vlanSflspInterfacesTransDelay     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "The estimated number of seconds it takes to transmit a link-state update packet 
                 over this interface. "
        ::= { vlanSflspInterfacesEntry 7 }

vlanSflspInterfacesReTransInterval     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "The number of seconds between link-state advertisement retransmissions, for
                 adjacencies belonging to this interface.  This value is also used when re-
                 transmitting database description and link-state request packets. "
        ::= { vlanSflspInterfacesEntry 8 }

vlanSflspInterfacesHelloInterval     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "The lenght of time, in seconds, between the Hello packets that the switch sends
                 on the interface.  This value must be the same for all switches attached to a 
                 common network. "
        ::= { vlanSflspInterfacesEntry 9 }

vlanSflspInterfacesDeadInterval     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "The number of seconds that a switch's Hello packets have not been seen
                 before it's neighbors declare the switch down.  This should be some multiple of the
                 Hello interval.  This value must be the same for all switches attached to a common network. "
        ::= { vlanSflspInterfacesEntry 10 }

vlanSflspInterfacesPollInterval     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "The larger time interval, in seconds, between the Hello packets sent to an
                 inactive non-broadcast multi-access neighbor. "
        ::= { vlanSflspInterfacesEntry 11 }

vlanSflspInterfacesState     OBJECT-TYPE
        SYNTAX          INTEGER {
                                        down(1),
                                        loopback(2),
                                        waiting(3),
                                        point-to-point(4),
                                        dr(5),
                                        bdr(6),
                                        dr-other(7)
                                }
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The SFLSP Interface State. "
        ::= { vlanSflspInterfacesEntry 12 }

vlanSflspInterfacesDS     OBJECT-TYPE
        SYNTAX          SfpsAddress 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "An octet string uniquely identifying the designated switch in the Switch Fabric.
                 By convention, to ensure uniqueness this should default to the base mac address."
        ::= { vlanSflspInterfacesEntry 13 }

vlanSflspInterfacesBDS     OBJECT-TYPE
        SYNTAX          SfpsAddress 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "An octet string uniquely identifying the backup designated switch in the Switch Fabric.
                 By convention, to ensure uniqueness this should default to the base mac address."
        ::= { vlanSflspInterfacesEntry 14 }

vlanSflspInterfacesEvents     OBJECT-TYPE
        SYNTAX          Counter 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of times this SFLSP interface has changed its
                 state, or an error has occured. "
        ::= { vlanSflspInterfacesEntry 15 }

vlanSflspInterfacesAuthKey     OBJECT-TYPE
        SYNTAX          SfpsAddress 
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "THe Authentification Key.  If the Area's Authorization Type is
                 simplePassword, and the key length is shorter than 8 octets, the agent will
                 left adjust and zero fill to 8 octets. "
        ::= { vlanSflspInterfacesEntry 16 }



-- IfMetric

vlanSflspIfMetricTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF VlanSflspIfMetricEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                " The TOS metrics for a non-virtual interface indentified by the 
                 interface index."
        ::= { vlanSflspIfMetric 1 }

vlanSflspIfMetricEntry      OBJECT-TYPE
        SYNTAX  VlanSflspIfMetricEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                " A particular TOS metric for a non-virtual interface identified by
                 the interface index." 
        INDEX   { vlanSflspIfMetricIfAddress, vlanSflspIfMetricIfTOSType  }
        ::= { vlanSflspIfMetricTable 1 }

VlanSflspIfMetricEntry ::=
        SEQUENCE {
                vlanSflspIfMetricIfAddress                    OCTET STRING,
                vlanSflspIfMetricIfTOSType                    INTEGER,
                vlanSflspIfMetricIfMetric                     INTEGER,
                vlanSflspIfMetricIfStatus                     INTEGER
                
        }

vlanSflspIfMetricIfAddress     OBJECT-TYPE
        SYNTAX          OCTET STRING 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "A 10 byte octet string uniquely identifying the port address.
                 By convention, to ensure uniqueness the first six bytes should default
                 to the base mac address and the last four bytes should default to the
                 port number of the interface."
        ::= { vlanSflspIfMetricEntry 1 }

vlanSflspIfMetricIfTOSType     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The type of service metric being referenced.  On row creation, this can be 
                 derived from the instance.."
        ::= { vlanSflspIfMetricEntry 2 }

vlanSflspIfMetricIfMetric     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "The metric of using this type of service on this interface.  The default value of the
                 TOS 0 Metric is 10^8 / ifSpeed.
                 The value FFFF is distinguished to mean 'no route via this TOS'. "
        ::= { vlanSflspIfMetricEntry 3 }

vlanSflspIfMetricIfStatus     OBJECT-TYPE
        SYNTAX          INTEGER {
                                        valid(1),
                                        invalid(2)
                                }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "This variable displays the validity or invalidity of the entry.
                 Setting it to 'invalid' has the effect of rendering it inoperative.
                 The internal effect (row removal) is implementation dependent "
        ::= { vlanSflspIfMetricEntry 4 }

-- Neighbors

vlanSflspNeighborsTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF VlanSflspNeighborsEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "A table of non-virtual neighbor information ."
        ::= { vlanSflspNeighbors 1 }

vlanSflspNeighborsEntry      OBJECT-TYPE
        SYNTAX  VlanSflspNeighborsEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "The information regarding a single neighbor. " 
        INDEX   { vlanSflspNeighborsPortName }
        ::= { vlanSflspNeighborsTable 1 }

VlanSflspNeighborsEntry ::=
        SEQUENCE {
                vlanSflspNeighborsPortName                      OCTET STRING,
                vlanSflspNeighborsSwitchID                      OCTET STRING,
                vlanSflspNeighborsOptions                       INTEGER,
                vlanSflspNeighborsPriority                      INTEGER,
                vlanSflspNeighborsState                         INTEGER,
                vlanSflspNeighborsEvents                        Counter,
                vlanSflspNeighborsLSRetransQLen                 Gauge,
                vlanSflspNeighborsHELLOsRcvd                    INTEGER,
                vlanSflspNeighborsDBDsRcvd                              INTEGER,
                vlanSflspNeighborsLSUsRcvd                              INTEGER,
                vlanSflspNeighborsLSRsRcvd                              INTEGER,
                vlanSflspNeighborsLSACKsRcvd                    INTEGER,
                vlanSflspNeighborsHELLOsSent                    INTEGER,
                vlanSflspNeighborsDBDsSent                              INTEGER,
                vlanSflspNeighborsLSUsSent                              INTEGER,
                vlanSflspNeighborsLSRsSent                              INTEGER,
                vlanSflspNeighborsLSACKsSent                    INTEGER,
                vlanSflspNeighborsNBMAStatus                    INTEGER,                
                vlanSflspNeighborsFULLTimeSec                   TimeTicks               
        }

vlanSflspNeighborsPortName     OBJECT-TYPE
        SYNTAX          OCTET STRING 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "A 10 byte octet string uniquely identifying the neighbor's port address.
                 By convention, to ensure uniqueness the first six bytes should default
                 to the base mac address and the last four bytes should default to the
                 port number of the neighbor's interface."
        ::= { vlanSflspNeighborsEntry 1 }

vlanSflspNeighborsSwitchID     OBJECT-TYPE
        SYNTAX          OCTET STRING 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "An octet string uniquely identifying the neighboring switch in the Switch Fabric.
                 By convention, to ensure uniqueness this should default to the base mac address."
      ::= { vlanSflspNeighborsEntry 2 }

vlanSflspNeighborsOptions     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "A bit Mask corresponding to the neighbor's options field.
                 Bit 0, if set, indicates that the area accepts and operates
                 on external information;  if zero, it is a stub area.
                
                 Bit 1, if set, indicates that the system will operate on Type 
                 of Service metrics other than TOS 0.  If zero, the neighbor
                 will ignore all metrics except the TOS 0 metric ."
        ::= { vlanSflspNeighborsEntry 3 }

vlanSflspNeighborsPriority     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                " The priority of this neighbor in the designated switch election
                 algorithm.  The value 0 signifies that the neighbor is not eligible 
                 to become the designated switch on this particular network."
        ::= { vlanSflspNeighborsEntry 4 }

vlanSflspNeighborsState     OBJECT-TYPE
        SYNTAX          INTEGER  {
                                down(1),
                                attempt(2),
                                init(3),
                                two-way(4),
                                exchange(5),
                                exchange-start(6),
                                loading(7),
                                full(8)
                                  } 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                " The State of the relationship with this Neighbor."
        ::= { vlanSflspNeighborsEntry 5 }

vlanSflspNeighborsEvents     OBJECT-TYPE
        SYNTAX          Counter 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of times this neighbor relationship has
                 changed state, or an error has occurred. "
        ::= { vlanSflspNeighborsEntry 6 }

vlanSflspNeighborsLSRetransQLen     OBJECT-TYPE
        SYNTAX          Gauge 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                " The current length of the retransmission queue."
        ::= { vlanSflspNeighborsEntry 7 }

vlanSflspNeighborsHELLOsRcvd    OBJECT-TYPE
    SYNTAX  INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of hello packets received from this neighbor"
        ::= { vlanSflspNeighborsEntry 8 }

vlanSflspNeighborsDBDsRcvd     OBJECT-TYPE
    SYNTAX  INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of database description packets received from this neighbor"
        ::= { vlanSflspNeighborsEntry 9 }

vlanSflspNeighborsLSUsRcvd     OBJECT-TYPE
    SYNTAX  INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of link state update packets received from this neighbor"
        ::= { vlanSflspNeighborsEntry 10 }

vlanSflspNeighborsLSRsRcvd     OBJECT-TYPE
    SYNTAX  INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of link state request packets received from this neighbor"
        ::= { vlanSflspNeighborsEntry 11 }

vlanSflspNeighborsLSACKsRcvd    OBJECT-TYPE
    SYNTAX  INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of link state acknowledgement packets received from this neighbor"
        ::= { vlanSflspNeighborsEntry 12 }

vlanSflspNeighborsHELLOsSent     OBJECT-TYPE
    SYNTAX  INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of hello packets sent to this neighbor"
        ::= { vlanSflspNeighborsEntry 13 }

vlanSflspNeighborsDBDsSent     OBJECT-TYPE
    SYNTAX  INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of database description packets sent to this neighbor"
        ::= { vlanSflspNeighborsEntry 14 }

vlanSflspNeighborsLSUsSent     OBJECT-TYPE
    SYNTAX  INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of link state update packets sent to this neighbor"
        ::= { vlanSflspNeighborsEntry 15 }

vlanSflspNeighborsLSRsSent     OBJECT-TYPE
    SYNTAX  INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of link state request packets sent to this neighbor"
        ::= { vlanSflspNeighborsEntry 16 }

vlanSflspNeighborsLSACKsSent     OBJECT-TYPE
    SYNTAX  INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of link state acknowledgement packets sent to this neighbor"
        ::= { vlanSflspNeighborsEntry 17 }

vlanSflspNeighborsNBMAStatus     OBJECT-TYPE
        SYNTAX          INTEGER  {
                                        valid(1),
                                        invalid(2)
                                  } 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                " The variable displays the validity or invalidity of the
                  entry.  Setting it to 'invalid' has the effect of rendering
                 it inoperative.  The internal effect (row removal) is implementation
                 dependant."
        ::= { vlanSflspNeighborsEntry 18 }

vlanSflspNeighborsFULLTimeSec     OBJECT-TYPE
    SYNTAX  TimeTicks 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Neighbor went to FULL state at this time "
        ::= { vlanSflspNeighborsEntry 19 }

-- Area

vlanSflspAreaTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF VlanSflspAreaEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Information describing the configured parameters and
                 cumulative statistics of the switches attached areas."
        ::= { vlanSflspArea 1 }

vlanSflspAreaEntry      OBJECT-TYPE
        SYNTAX  VlanSflspAreaEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Information describing the configured parameters and
                 cumulative statistics of one of the switches attached
                 areas." 
        INDEX   { vlanSflspAreaAreaID  }
        ::= { vlanSflspAreaTable 1 }

VlanSflspAreaEntry ::=
        SEQUENCE {
                vlanSflspAreaAreaID                IpAddress,
                vlanSflspAreaAuthType              INTEGER,
                vlanSflspAreaSPFRuns               Counter,
                vlanSflspAreaABRCount              Gauge,
                vlanSflspAreaASBRCount             Gauge,
                vlanSflspAreaAreaLSACnt            Gauge,
                vlanSflspAreaAreaCheckSum          INTEGER,
                vlanSflspAreaLastSpfRun            TimeTicks
                  }

vlanSflspAreaAreaID     OBJECT-TYPE
        SYNTAX          IpAddress
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "A 10 byte octet string uniquely identifying an area."
        ::= { vlanSflspAreaEntry 1 }

vlanSflspAreaAuthType   OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "The authentication type specified for an area.
                 Additional authentication types may be assigned locally
                 on a per Area basis."
        ::= { vlanSflspAreaEntry 2 }

vlanSflspAreaSPFRuns    OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of times that the intra-area route table
                 has been calculated using this area's link-state
                 database.  This is typically done using Dijkstra's
                 algorithm."
        ::= { vlanSflspAreaEntry 3 }

vlanSflspAreaABRCount   OBJECT-TYPE
        SYNTAX          Gauge
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The total number of area border switches reachable
                 within this area.  This is initially zero, and is
                 calculated in each SPF Pass."
        ::= { vlanSflspAreaEntry 4 }

vlanSflspAreaASBRCount   OBJECT-TYPE
        SYNTAX          Gauge
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The total number of Autonomous System border switches
                 reachable within this area.  This is initially zero,
                 and is calculated in each LSP Pass."
        ::= { vlanSflspAreaEntry 5 }

vlanSflspAreaAreaLSACnt   OBJECT-TYPE
        SYNTAX          Gauge
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The total number of link-state advertisements in this
                 area's link-state database, excluding AS External LSA's"
        ::= { vlanSflspAreaEntry 6 }

vlanSflspAreaAreaCheckSum   OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The 32-bit unsigned sum of the link-state
                 advertisements' LS checksums contained in this area's
                 link-state database.  This sum excludes external (LS
                 type 5) link-state advertisements.  The sum can be used
                 to determine if there has been a change in a switches
                 link state database, and to compare the link-state
                 database of two switches."
        ::= { vlanSflspAreaEntry 7 }

vlanSflspAreaLastSpfRun   OBJECT-TYPE
        SYNTAX          TimeTicks
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Timestamp of last run of spf"
        ::= { vlanSflspAreaEntry 8 }


-- 1stHop

vlanSflsp1stHopTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF VlanSflsp1stHopEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table contains the SecureFast path next-hop table.  It
                 reports various information about the next switch port
                 address on the path to a particular destination switch
                 port address."
        ::= { vlanSflsp1stHop 1 }

vlanSflsp1stHopEntry      OBJECT-TYPE
        SYNTAX  VlanSflsp1stHopEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry describes the next hop switch port addresses for
                 each destination switch port address." 
        INDEX   { vlanSflsp1stHopDestSwitch  }
        ::= { vlanSflsp1stHopTable 1 }

VlanSflsp1stHopEntry ::=
        SEQUENCE {
                vlanSflsp1stHopDestSwitch               OCTET STRING,
                vlanSflsp1stHopPath11stHop              OCTET STRING,
                vlanSflsp1stHopPath21stHop              OCTET STRING,
                vlanSflsp1stHopPath31stHop              OCTET STRING
                  }

vlanSflsp1stHopDestSwitch     OBJECT-TYPE
        SYNTAX          OCTET STRING 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "This is the index to the table, representing destination
                 switch port addresses for each port address within
                 the switch fabric."
        ::= { vlanSflsp1stHopEntry 1 }

vlanSflsp1stHopPath11stHop     OBJECT-TYPE
        SYNTAX          OCTET STRING 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The 1st hop of the 1st path to the destination switch"
        ::= { vlanSflsp1stHopEntry 2 }

vlanSflsp1stHopPath21stHop     OBJECT-TYPE
        SYNTAX          OCTET STRING 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The 1st host of the 2nd path to the destination switch"
        ::= { vlanSflsp1stHopEntry 3 }

vlanSflsp1stHopPath31stHop     OBJECT-TYPE
        SYNTAX          OCTET STRING 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The 1st hop of the 3rd path to the destination switch"
        ::= { vlanSflsp1stHopEntry 4 }

-- Trace Path

vlanSflspTracePathAPIDest   OBJECT-TYPE
    SYNTAX    OCTET STRING
    ACCESS    read-write
    STATUS    mandatory
    DESCRIPTION
           "This is the switch address for which a path list will be
            requested in the sfTracePathTable."
    ::= { vlanSflspTracePathAPI 1 }
 
vlanSflspTracePathAPIID    OBJECT-TYPE
    SYNTAX           INTEGER
    ACCESS           read-write
    STATUS           mandatory
    DESCRIPTION
           "This is an ID to uniquely identify the path list request
            in the sfTracePathTable."
    ::= { vlanSflspTracePathAPI 2 }

vlanSflspTracePathAPIType    OBJECT-TYPE
    SYNTAX           INTEGER {
                                 other(1),
                                 invalid(2)
                              }
    ACCESS           read-write
    STATUS           mandatory
    DESCRIPTION
           "The administrative control of the trace path request entry in
            the sfTracePathTable.  It is used to create or delete a trace
            path request entry."
    ::= { vlanSflspTracePathAPI 3 }

vlanSflspTracePathAPIAction    OBJECT-TYPE
    SYNTAX           INTEGER {
                                 other(1),
                                 activate(2),
                                 suspend(3)
                             }
    ACCESS           read-write
    STATUS           mandatory
    DESCRIPTION
           "The action to be performed by the trace path request entry
            in the sfTracePathTable."
    ::= { vlanSflspTracePathAPI 4 }


-- Trace Path

vlanSflspTracePathTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF VlanSflspTracePathEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
            "This table allows the determination of paths to known
             destinations using the same internal methods used by the
             switch to program these paths.  It is indexed by
             destination switch address and a request identifier.
             If successful, the resulting path, which consists of a
             list of switch port addresses, is reported in the
             sfTracePathReqHopTable."
        ::= { vlanSflspTracePathInternal 1 }

vlanSflspTracePathEntry      OBJECT-TYPE
        SYNTAX  VlanSflspTracePathEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
            "An SF Trace Path Table entry containing objects for a
             particular destination switch." 
        INDEX  { vlanSflspTracePathDest, vlanSflspTracePathID }
        ::= { vlanSflspTracePathTable 1 }

VlanSflspTracePathEntry ::=
        SEQUENCE {
                vlanSflspTracePathDest             OCTET STRING,
                vlanSflspTracePathID               INTEGER,
                vlanSflspTracePathAction           INTEGER,
                vlanSflspTracePathStatus           INTEGER
                 }

vlanSflspTracePathDest  OBJECT-TYPE
        SYNTAX          OCTET STRING
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            "The switch address of the requested destination."
        ::= { vlanSflspTracePathEntry 1 }

vlanSflspTracePathID    OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            "A unique identifier for this path request."
        ::= { vlanSflspTracePathEntry 2 }

vlanSflspTracePathAction    OBJECT-TYPE
        SYNTAX          INTEGER {
                                 other(1),
                                 activate(2),
                                 suspend(3)
                                 }                             
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
            "The action to be performed by this trace path entry."
        ::= { vlanSflspTracePathEntry 3 }

vlanSflspTracePathStatus    OBJECT-TYPE
        SYNTAX          INTEGER {
                                 other(1),
                                 success(2),
                                 failed(3)
                                 }                             
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            "The results of a trace path request.  A result of success(4)
             means the device has determined at least one path to the
             destination."
        ::= { vlanSflspTracePathEntry 4 }


-- Trace Path List

vlanSflspTracePathListTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF VlanSflspTracePathListEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
            "This table contains the SecureFast Trace Path List table."
        ::= { vlanSflspTracePathInternal 2 }

vlanSflspTracePathListEntry      OBJECT-TYPE
        SYNTAX  VlanSflspTracePathListEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
            "This table contains the switch port addresses of each hop
             of each path traversed for a particular destination switch.
             These paths correspond to trace path requests in the
             sfTracePathReqTable." 
        INDEX  { vlanSflspTracePathListDest, vlanSflspTracePathListID, vlanSflspTracePathListPathNum, vlanSflspTracePathListHopNum }
        ::= { vlanSflspTracePathListTable 1 }

VlanSflspTracePathListEntry ::=
        SEQUENCE {
                vlanSflspTracePathListDest         OCTET STRING,
                vlanSflspTracePathListID           INTEGER,
                vlanSflspTracePathListPathNum      INTEGER,
                vlanSflspTracePathListHopNum       INTEGER,
                vlanSflspTracePathListHopAddr      OCTET STRING
                 }

vlanSflspTracePathListDest  OBJECT-TYPE
        SYNTAX          OCTET STRING
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            "The switch address of the destination for this trace path
             entry, corresponding to a requested destination in the
             sfTracePathReqTable."
        ::= { vlanSflspTracePathListEntry 1 }

vlanSflspTracePathListID  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            "A unique identifier corresponding to the identifier in a
             trace path request in the sfTracePathReqTable."
        ::= { vlanSflspTracePathListEntry 2 }

vlanSflspTracePathListPathNum  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            "The number of this path in the table of networks traversed.
             This value represents a unique path id when there are multiple
             paths to a single destination."
        ::= { vlanSflspTracePathListEntry 3 }

vlanSflspTracePathListHopNum  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            "The hop number in this path."
        ::= { vlanSflspTracePathListEntry 4 }

vlanSflspTracePathListHopAddr  OBJECT-TYPE
        SYNTAX          OCTET STRING
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            "The switch port address of this hop on the path."
        ::= { vlanSflspTracePathListEntry 5 }

-- 

vlanSflspLSDBFloodTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF VlanSflspLSDBFloodEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSDBFlood 1 }

vlanSflspLSDBFloodEntry      OBJECT-TYPE
        SYNTAX  VlanSflspLSDBFloodEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
            "" 
        INDEX  { vlanSflspLSDBFloodAreaID, vlanSflspLSDBFloodType, vlanSflspLSDBFloodLSID, vlanSflspLSDBFloodAdvSwitchID }
        ::= { vlanSflspLSDBFloodTable 1 }

VlanSflspLSDBFloodEntry ::=
        SEQUENCE {
                vlanSflspLSDBFloodAreaID           INTEGER,
                vlanSflspLSDBFloodType             INTEGER,
                vlanSflspLSDBFloodLSID             SfpsAddress,
                vlanSflspLSDBFloodAdvSwitchID      SfpsAddress,
                vlanSflspLSDBFloodSequence         INTEGER,
                vlanSflspLSDBFloodAge              INTEGER,
                vlanSflspLSDBFloodChecksum         INTEGER,
                vlanSflspLSDBFloodAdvertisement    SfpsAddress,
                vlanSflspLSDBFloodUsedInSPF        INTEGER,
                vlanSflspLSDBFloodEverUsed         INTEGER
                 }

vlanSflspLSDBFloodAreaID  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSDBFloodEntry 1 }

vlanSflspLSDBFloodType  OBJECT-TYPE
        SYNTAX          INTEGER {
                switchLink(1),
                connectionLink(2)
        }
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSDBFloodEntry 2 }

vlanSflspLSDBFloodLSID  OBJECT-TYPE
        SYNTAX          SfpsAddress
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSDBFloodEntry 3 }

vlanSflspLSDBFloodAdvSwitchID  OBJECT-TYPE
        SYNTAX          SfpsAddress
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSDBFloodEntry 4 }

vlanSflspLSDBFloodSequence  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSDBFloodEntry 5 }

vlanSflspLSDBFloodAge  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSDBFloodEntry 6 }

vlanSflspLSDBFloodChecksum  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSDBFloodEntry 7 }

vlanSflspLSDBFloodAdvertisement  OBJECT-TYPE
        SYNTAX          SfpsAddress
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSDBFloodEntry 8 }

vlanSflspLSDBFloodUsedInSPF  OBJECT-TYPE
        SYNTAX          INTEGER {
--              false(0),
                true(1)
        }
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSDBFloodEntry 9 }

vlanSflspLSDBFloodEverUsed  OBJECT-TYPE
        SYNTAX          INTEGER {
--              false(0),
                true(1)
        }
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSDBFloodEntry 10 }


--SFLSP Statistics

vlanSflspLSPStatsMaxOnQueue  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSPStats 1 }

vlanSflspLSPStatsCurOnQueue  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSPStats 2 }

vlanSflspLSPStatsMaxTimeUs  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSPStats 3 }

vlanSflspLSPStatsCurTimeUs  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSPStats 4 }

vlanSflspLSPStatsMaxTimeOccurred  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSPStats 5 }

vlanSflspLSPStatsMaxOnQOccurred  OBJECT-TYPE
        SYNTAX          TimeTicks
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSPStats 6 }

vlanSflspLSPStatsTotalSwLinks  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSPStats 7 }

vlanSflspLSPStatsLastChangeDet  OBJECT-TYPE
        SYNTAX          TimeTicks
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSPStats 8 }

vlanSflspLSPStatsNumSPFRuns  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSPStats 9 }

vlanSflspLSPStatsNumFULLNbrs  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSPStats 10 }

vlanSflspLSPStatsNumIntfs  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSPStats 11 }

vlanSflspLSPStatsNum1stHops  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSPStats 12 }

vlanSflspLSPStatsNumUpdates  OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSPStats 13 }

vlanSflspLSPStatsLastUpdateRecvd  OBJECT-TYPE
        SYNTAX          TimeTicks
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
            ""
        ::= { vlanSflspLSPStats 14 }

END