CTRON-SSR-L3-MIB device MIB details by Enterasys Networks Inc

CTRON-SSR-L3-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CTRON-SSR-L3-MIB.

Vendor:	Enterasys Networks Inc
Mib:	CTRON-SSR-L3-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

CTRON-SSR-L3-MIB DEFINITIONS ::= BEGIN

--  Cabletron Systems, Inc.
--  35 Industrial Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com
 
--  This module provides authoritative definitions for Cabletron's
--  enterprise-specific schema to access SSR Layer 3 processing subsystem..
--
--  This module will be extended, as required.
--
 
--  Cabletron Systems reserves the right to make changes in
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.
 
--  Copyright June 1998 Cabletron Systems
 

IMPORTS
       MODULE-IDENTITY, OBJECT-TYPE, Counter32, IpAddress 
       FROM SNMPv2-SMI
       TEXTUAL-CONVENTION        
       FROM SNMPv2-TC
       MODULE-COMPLIANCE, OBJECT-GROUP
       FROM SNMPv2-CONF
       ssrMibs
       FROM CTRON-SSR-SMI-MIB;

l3MIB MODULE-IDENTITY
 LAST-UPDATED
     "199909220000Z"  -- September 22, 1999
   ORGANIZATION
     "Cabletron Systems, Inc."
   CONTACT-INFO
    "Cabletron Systems, Inc.
     35 Industrial Way, P.O. Box 5005
     Rochester, NH 03867-0505
     (603) 332-9400
     support@ctron.com
     http://www.ctron.com"
 
   DESCRIPTION
     "This module defines a schema to access SSR Layer 3 processing subsystem.
       This mib is no longer supported on ssr platforms. features of this
      mib now exist in standard mibs. RMON I RFC 1757 provides
      Layer 3 information and ctron-ssr-policy mib to program filter tables."

   REVISION "199909220000Z"
   DESCRIPTION "Firmware release 3.0 introduces full rmon I and II. this
                enterprise mib is now obsolete."
        ::= { ssrMibs 600 }

   SSRProtocols ::= TEXTUAL-CONVENTION
     STATUS       obsolete
     DESCRIPTION
        "The protocol encapsulated by an IP Header as defined by IANA in
        ftp://ftp.isi.edu/in-notes/iana/assignments/protocol-numbers"
     SYNTAX       INTEGER {
     hopopt(0),      -- HOPOPT      IPv6 Hop-by-Hop Option            [RFC1883]
     icmp(1),        -- ICMP        Internet Control Message       [RFC792,JBP]
     igmp(2),        -- IGMP        Internet Group Management     [RFC1112,JBP]
     ggp(3),         -- GGP         Gateway-to-Gateway              [RFC823,MB]
     ipip(4),        -- IP          IP in IP (encapsulation)          [RFC2003]
     stream(5),      -- ST          Stream                 [RFC1190,IEN119,JWF]
     tcp(6),         -- TCP         Transmission Control           [RFC793,JBP]
     cbt(7),         -- CBT         CBT                             [Ballardie]
     egp(8),         -- EGP         Exterior Gateway Protocol     [RFC888,DLM1]
     igp(9),         -- IGP         any private interior gateway          [JBP]
    bbnrccmon(10),   -- BBN-RCC-MON BBN RCC Monitoring                    [SGC]
    nvpii(11),       -- NVP-II      Network Voice Protocol         [RFC741,SC3]
    pup(12),         -- PUP         PUP                             [PUP,XEROX]
    argus(13),       -- ARGUS       ARGUS                                [RWS4]
    emcon(14),       -- EMCON       EMCON                                 [BN7]
    xnet(15),        -- XNET        Cross Net Debugger            [IEN158,JFH2]
    chaos(16),       -- CHAOS       Chaos                                 [NC3]
    udp(17),         -- UDP         User Datagram                  [RFC768,JBP]
    mux(18),         -- MUX         Multiplexing                    [IEN90,JBP]
    dcn(19),         -- DCN-MEAS    DCN Measurement Subsystems           [DLM1]
    hmp(20),         -- HMP         Host Monitoring                [RFC869,RH6]
    prm(21),         -- PRM         Packet Radio Measurement              [ZSU]
    xnsidp(22),      -- XNS-IDP     XEROX NS IDP               [ETHERNET,XEROX]
    trunk1(23),      -- TRUNK-1     Trunk-1                              [BWB6]
    trunk2(24),      -- TRUNK-2     Trunk-2                              [BWB6]
    leaf1(25),       -- LEAF-1      Leaf-1                               [BWB6]
    leaf2(26),       -- LEAF-2      Leaf-2                               [BWB6]
    rdp(27),         -- RDP         Reliable Data Protocol         [RFC908,RH6]
    irtp(28),        -- IRTP        Internet Reliable Transaction  [RFC938,TXM]
    isotp4(29),      -- ISO-TP4     ISO Transport Protocol Class 4 [RFC905,RC77]
    netblt(30),      -- NETBLT      Bulk Data Transfer Protocol    [RFC969,DDC1]
    mfe(31),         -- MFE-NSP     MFE Network Services Protocol  [MFENET,BCH2]
    meritInp(32),   -- MERIT-INP   MERIT Internodal Protocol             [HWB]
    sep(33),         -- SEP         Sequential Exchange Protocol        [JC120]
    tpc(34),         -- 3PC         Third Party Connect Protocol         [SAF3]
    idpr(35),        -- IDPR        Inter-Domain Policy Routing Protocol [MXS1] 
    xtp(36),         -- XTP         XTP                                   [GXC]
    ddp(37),         -- DDP         Datagram Delivery Protocol            [WXC]
    idprCmtp(38),        -- IDPR-CMTP   IDPR Control Message Transport Proto [MXS1]
    tppp(39),        -- TP++        TP++ Transport Protocol               [DXF]
    il(40),          -- IL          IL Transport Protocol            [Presotto]
    ipv6(41),        -- IPv6        Ipv6                              [Deering]    
    sdrp(42),        -- SDRP        Source Demand Routing Protocol       [DXE1]
    ipv6r(43),       -- IPv6-Route  Routing Header for IPv6           [Deering]
    ipv6f(44),       -- IPv6-Frag   Fragment Header for IPv6          [Deering]
    idrp(45),        -- IDRP        Inter-Domain Routing Protocol   [Sue Hares]
    rsvp(46),        -- RSVP        Reservation Protocol           [Bob Braden]
    gre(47),         -- GRE         General Routing Encapsulation     [Tony Li]
    mhrp(48),        -- MHRP        Mobile Host Routing Protocol[David Johnson]
    bna(49),         -- BNA         BNA                          [Gary Salamon]
    esp(50),         -- ESP         Encap Security Payload for IPv6   [RFC1827]
    ah(51),          -- AH          Authentication Header for IPv6    [RFC1826]
    inlsp(52),       -- I-NLSP      Integrated Net Layer Security  TUBA [GLENN]
    swipe(53),       -- SWIPE       IP with Encryption                    [JI6]
    narp(54),        -- NARP        NBMA Address Resolution Protocol  [RFC1735]
    mobile(55),      -- MOBILE      IP Mobility                       [Perkins]
    tlsp(56),        -- TLSP        Transport Layer Security Protocol   [Oberg]
    skip(57),        -- SKIP        SKIP                              [Markson]
    ipv6Icmp(58),   --  IPv6-ICMP   ICMP for IPv6                     [RFC1883]
    ipv6Nonxt(59),  --    IPv6-NoNxt  No Next Header for IPv6           [RFC1883]
    ipv6Opts(60),   -- IPv6-Opts   Destination Options for IPv6      [RFC1883]
    hostInternal(61),   --         any host internal protocol            [JBP]
    cftp(62),        -- CFTP        CFTP                            [CFTP,HCF2]
    any(63),         --          any local network                     [JBP]
    satExpak(64),   --   SAT-EXPAK   SATNET and Backroom EXPAK             [SHB]
    kryptolan(65),   --  KRYPTOLAN   Kryptolan                            [PXL1]
    rvd(66),         -- RVD         MIT Remote Virtual Disk Protocol      [MBG]
    ippc(67),        -- IPPC        Internet Pluribus Packet Core         [SHB]
    adfs(68),        -- any distributed file system           [JBP]
    satMon(69),     -- SAT-MON     SATNET Monitoring                     [SHB]
    visa(70),        -- VISA        VISA Protocol                        [GXT1]
    ipcv(71),        -- IPCV        Internet Packet Core Utility          [SHB]
    cpnx(72),        -- CPNX        Computer Protocol Network Executive  [DXM2]
    cphb(73),        -- CPHB        Computer Protocol Heart Beat         [DXM2]
    wsn(74),         -- WSN         Wang Span Network                     [VXD]
    pvp(75),         -- PVP         Packet Video Protocol                 [SC3]
    brSatMon(76),  -- BR-SAT-MON  Backroom SATNET Monitoring            [SHB]
    sunNd(77),      -- SUN-ND      SUN ND PROTOCOL-Temporary             [WM3]
    wbMon(78),      -- WB-MON      WIDEBAND Monitoring                   [SHB]
    wbExpak(79),    -- WB-EXPAK    WIDEBAND EXPAK                        [SHB]
    isoIp(80),      -- ISO-IP      ISO Internet Protocol                 [MTR]
    vmtp(81),        -- VMTP        VMTP                                 [DRC3]
    secureVmtp(82), -- SECURE-VMTP SECURE-VMTP                          [DRC3]
    vines(83),       -- VINES       VINES                                 [BXH]
    ttp(84),         -- TTP         TTP                                   [JXS]
    nsfnetIgp(85),  -- NSFNET-IGP  NSFNET-IGP                            [HWB]
    dgp(86),         -- DGP         Dissimilar Gateway Protocol     [DGP,ML109]
    tcf(87),         -- TCF         TCF                                  [GAL5]
    eigrp(88),       -- EIGRP       EIGRP                           [CISCO,GXS]
    ospfigp(89),     -- OSPFIGP     OSPFIGP                      [RFC1583,JTM4]
    spriteRpc(90),  -- Sprite-RPC  Sprite RPC Protocol            [SPRITE,BXW] 
    larp(91),        -- LARP        Locus Address Resolution Protocol     [BXH]
    mtp(92),         -- MTP         Multicast Transport Protocol          [SXA]
    ax25(93),       -- AX.25       AX.25 Frames                         [BK29]         
    ipipep(94),      -- IPIP        IP-within-IP Encapsulation Protocol   [JI6]
    micp(95),        -- MICP        Mobile Internetworking Control Pro.   [JI6]
    sccSp(96),      -- SCC-SP      Semaphore Communications Sec. Pro.    [HXH]     
    etherip(97),     -- ETHERIP     Ethernet-within-IP Encapsulation     [RXH1]
    encap(98),       -- ENCAP       Encapsulation Header         [RFC1241,RXB3]
    anyEncrpyt(99), -- any private encryption scheme         [JBP]
    gmtp(100),       -- GMTP        GMTP                                 [RXB5]
    ifmp(101),       -- IFMP        Ipsilon Flow Management Protocol   [Hinden]
    pnni(102),       -- PNNI        PNNI over IP                       [Callon]
    pim(103),        -- PIM         Protocol Independent Multicast  [Farinacci]
    aris(104),       -- ARIS        ARIS                              [Feldman]
    scps(105),       -- SCPS        SCPS                                [Durst]
    qnx(106),        -- QNX         QNX                                [Hunter]
    an(107),        -- A/N         Active Networks                    [Braden]
    ippcp(108),      -- IPPCP       IP Payload Compression Protocol [Doraswamy]
    snp(109),        -- SNP         Sitara Networks Protocol          [Sridhar]
    cpqP(110),      -- Compaq-Peer Compaq Peer Protocol                [Volpe]
    ipxIp(111),     -- IPX-in-IP   IPX in IP                             [Lee]
    vrrp(112),       -- VRRP        Virtual Router Redundancy Protocol [Hinden]
    reserved(255)    --             Reserved                              [JBP]
   }
 
 
 
   l3Group       OBJECT IDENTIFIER ::= { ssrMibs 3 }

   -- The L3-Flow Table
   -- This L3 table contains information on all the layer 3 
   -- flows the switch is processing.

   l3FlowTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF L3FlowEntry
       MAX-ACCESS  not-accessible
       STATUS      obsolete
       DESCRIPTION
        "A list of L3 flow entries."
       ::= { l3Group 1 }

   l3FlowEntry OBJECT-TYPE
       SYNTAX      L3FlowEntry
       MAX-ACCESS  not-accessible
       STATUS      obsolete
       DESCRIPTION
        "An entry containing the L3 flow information"
       INDEX   { 
        l3FlowIndex,
        l3FlowFilterId,
        l3FlowPortOfEntry,  
        l3FlowSrcIpAddress,
        l3FlowDstIpAddress,
        l3FlowTOS,
        l3FlowProtocol,
        l3FlowSrcPort,
        l3FlowDstPort
                }
       ::= { l3FlowTable 1 }

   L3FlowEntry ::=
       SEQUENCE {
           l3FlowIndex        INTEGER,
           l3FlowFilterId     INTEGER,
           l3FlowPortOfEntry  INTEGER,
           l3FlowSrcIpAddress IpAddress,
           l3FlowDstIpAddress IpAddress,
           l3FlowTOS          INTEGER,
           l3FlowProtocol     SSRProtocols,
           l3FlowSrcPort    INTEGER,
           l3FlowDstPort    INTEGER,
           l3FlowPkts            Counter32,
           l3FlowOctets          Counter32
       }

   l3FlowIndex OBJECT-TYPE
           SYNTAX  INTEGER  (0..4294967295)
           MAX-ACCESS  read-only
           STATUS  obsolete
           DESCRIPTION
        "A unique number for each flow. The encoding is 
        as explained.
        bit 0-15 = Table Index (0-64K)
        bit 16-18  = Table Number (0-3)
        bit 19-31  = Channel Number (0-32)"
       ::= { l3FlowEntry 1 }

   l3FlowFilterId OBJECT-TYPE
           SYNTAX  INTEGER  (0..254)
           MAX-ACCESS  read-only
           STATUS  obsolete
           DESCRIPTION
        "A filter byte to narrow the data returned by the agent.

         The number of possible flows can be extremely high. An SNMP walk
         could take a significatn resources. Using a walk with a filter will narrow the 
         values returned to those flows matching the fields used in the index. Currently
         only the first byte of this Integer is used.
         This byte specifies one or more fields to compare flows in the system against the 
         index in the get-next request.
         Big endian least significant Byte is encoding is as follows:
                 bit 0 : unused
                 bit 1 : Port Of Entry Filter mask
                 bit 2 : Src IP Address Filter mask
                 bit 3 : Dst IP Address Filter mask
                 bit 4 : Type Of Service Filter mask
                 bit 5 : Protocol Filter mask
                 bit 6 : Src port Filter mask
                 bit 7 : Dst port Filter mask

         A complete walk of the mib will use the filter value of 0 as will a get Request "
       ::= { l3FlowEntry 2 }
 
   l3FlowPortOfEntry OBJECT-TYPE
           SYNTAX  INTEGER  (0..1024)
           MAX-ACCESS  read-only
           STATUS  obsolete
           DESCRIPTION
        "The physical port in the chassis/shelf from which this flow 
         enters the switch." 
       ::= { l3FlowEntry 3 }
 
   l3FlowSrcIpAddress OBJECT-TYPE
           SYNTAX  IpAddress 
           MAX-ACCESS  read-only
           STATUS  obsolete
           DESCRIPTION
        "The source IP address for this flow." 
       ::= { l3FlowEntry 4 }
 
   l3FlowDstIpAddress OBJECT-TYPE
           SYNTAX  IpAddress 
           MAX-ACCESS  read-only
           STATUS  obsolete
           DESCRIPTION
        "The destination IP address for this flow." 
       ::= { l3FlowEntry 5 }
   
        l3FlowTOS OBJECT-TYPE
           SYNTAX  INTEGER  (0..15)
           MAX-ACCESS  read-only
           STATUS  obsolete
           DESCRIPTION
        "The Type Of Service for this flow." 
       ::= { l3FlowEntry 6 }
 
   l3FlowProtocol OBJECT-TYPE
         SYNTAX  SSRProtocols
           MAX-ACCESS  read-only
           STATUS  obsolete
           DESCRIPTION
        "The IP protocol for this flow. Official assignments are defined in
         ftp://ftp.isi.edu/in-notes/iana/assignments/protocol-numbers" 
       ::= { l3FlowEntry 7 }
 
   l3FlowSrcPort OBJECT-TYPE
           SYNTAX  INTEGER  (0..65535)
           MAX-ACCESS  read-only
           STATUS  obsolete
           DESCRIPTION
        "The source UDP/TCP port for this flow. Official port numbers 
         are defined in:
        ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers"
       ::= { l3FlowEntry 8 }
 
   l3FlowDstPort OBJECT-TYPE
           SYNTAX  INTEGER  (0..65535)
           MAX-ACCESS  read-only
           STATUS  obsolete
           DESCRIPTION
        "The destination UDP/TCP port for this flow. Official port numbers are 
         defined in ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers"
       ::= { l3FlowEntry 9 }
 
   l3FlowPkts OBJECT-TYPE
           SYNTAX  Counter32 
           MAX-ACCESS  read-only
           STATUS  obsolete
           DESCRIPTION
        "The packets in this flow." 
       ::= { l3FlowEntry 10 }
 
   l3FlowOctets OBJECT-TYPE
           SYNTAX  Counter32 
           MAX-ACCESS  read-only
           STATUS  obsolete
           DESCRIPTION
        "The number of octets in this flow." 
       ::= { l3FlowEntry 11 }
 
   -- The L3-Flow Priority Table
   -- This L3 table contains information on priority of all
   -- the layer 3 flows the switch is processing.

   l3FlowPriorityTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF L3FlowPriorityEntry
       MAX-ACCESS  not-accessible
       STATUS      obsolete
       DESCRIPTION
        "A list of priorities for L3 flow entries."
       ::= { l3Group 2 }

   l3FlowPriorityEntry OBJECT-TYPE
       SYNTAX      L3FlowPriorityEntry
       MAX-ACCESS  not-accessible
       STATUS      obsolete
       DESCRIPTION
        "An entry containing the L3 flow priority information"
       INDEX   { l3FlowPriorityIndex }
       ::= { l3FlowPriorityTable 1 }

   L3FlowPriorityEntry ::=
       SEQUENCE {
           l3FlowPriorityIndex        INTEGER,
           l3FlowPriorityName         OCTET STRING,
           l3FlowPrioritySrcIpAddress IpAddress,
           l3FlowPrioritySrcPort      INTEGER,
           l3FlowPriorityDstIpAddress IpAddress,
           l3FlowPriorityDstPort      INTEGER,
           l3FlowPriorityTOS          INTEGER,
           l3FlowPriorityProtocol     SSRProtocols,
           l3FlowPriorityInterface    OCTET STRING,
           l3FlowPriority             INTEGER
       }

   l3FlowPriorityIndex OBJECT-TYPE
           SYNTAX  INTEGER  (0..4294967295) 
           MAX-ACCESS  read-write
           STATUS  obsolete
           DESCRIPTION
        "The unique entry number for this flow." 
       ::= { l3FlowPriorityEntry 1 }

   l3FlowPriorityName OBJECT-TYPE
           SYNTAX  OCTET STRING(SIZE(0..20)) 
           MAX-ACCESS  read-write
           STATUS  obsolete
           DESCRIPTION
        "A unique name for this flow. Padded with blanks to 20 bytes." 
       ::= { l3FlowPriorityEntry 2 }
 
   l3FlowPrioritySrcIpAddress OBJECT-TYPE
           SYNTAX  IpAddress 
           MAX-ACCESS  read-write
           STATUS  obsolete
           DESCRIPTION
        "The source IP address for this flow." 
       ::= { l3FlowPriorityEntry 3 }
 
   l3FlowPrioritySrcPort OBJECT-TYPE
           SYNTAX  INTEGER  (0..65535) 
           MAX-ACCESS  read-write
           STATUS  obsolete
           DESCRIPTION
        "The source UDP/TCP port for this flow. 
         The Official port numbers are defined in:
        ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers" 
       ::= { l3FlowPriorityEntry 4 }
 
   l3FlowPriorityDstIpAddress OBJECT-TYPE
           SYNTAX  IpAddress 
           MAX-ACCESS  read-write
           STATUS  obsolete
           DESCRIPTION
        "The destination IP address for this flow." 
       ::= { l3FlowPriorityEntry 5 }
 
   l3FlowPriorityDstPort OBJECT-TYPE
           SYNTAX  INTEGER  (0..65535)
           MAX-ACCESS  read-write
           STATUS  obsolete
           DESCRIPTION
        "The destination UDP/TCP port for this flow.
         Official port numbers are defined in
         ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers" 
       ::= { l3FlowPriorityEntry 6 }
 
   l3FlowPriorityTOS OBJECT-TYPE
           SYNTAX  INTEGER  (0..15)
           MAX-ACCESS  read-write
           STATUS  obsolete
           DESCRIPTION
        "The Type Of Service for this flow." 
       ::= { l3FlowPriorityEntry 7 }
 
   l3FlowPriorityProtocol OBJECT-TYPE
           SYNTAX  SSRProtocols
           MAX-ACCESS  read-write
           STATUS  obsolete
           DESCRIPTION
           "The IP protocol for this flow. Official assignments are defined in
            ftp://ftp.isi.edu/in-notes/iana/assignments/protocol-numbers" 
       ::= { l3FlowPriorityEntry 8 }

   l3FlowPriorityInterface OBJECT-TYPE
           SYNTAX  OCTET STRING  (SIZE (0..64))
           MAX-ACCESS  read-write
           STATUS  obsolete
           DESCRIPTION
             "The set of interfaces which are associated with this entry.
              Each octet within the value of this object specifies a set of
              eight interfaces, with the first octet specifying interfaces
              1 through 8, the second octet specifying interfaces 9
              through 16, etc.  Within each octet, the most
              significant bit represents the lowest numbered
              interface, and the least significant bit represents the
              highest numbered interface.  Thus, each interface of the
              switch is represented by a single bit within the
              value of this object.  If that bit has a value of
              '1' then that interface is included in the set of
              interfaces; the interface is not included if its bit has a
              value of '0'."  
       ::= { l3FlowPriorityEntry 9 }

   l3FlowPriority OBJECT-TYPE
        SYNTAX    INTEGER {
                   low(1),
                   medium(2),
                   high(3),
                   control(4)
                   }

        MAX-ACCESS  read-write
        STATUS  obsolete
        DESCRIPTION
        "The priority for this flow." 
       ::= { l3FlowPriorityEntry 10 }


-- ### Compliance ###
 
l3Conformance OBJECT IDENTIFIER ::= { l3MIB 2 }
l3Compliances OBJECT IDENTIFIER ::= { l3Conformance 1 }
l3Groups OBJECT IDENTIFIER ::= { l3Conformance 2 }
 
l3ComplianceV10 MODULE-COMPLIANCE
    STATUS obsolete
    DESCRIPTION
            "The compliance statement for the SSR-L3-MIB."
    MODULE  -- this module
        MANDATORY-GROUPS { l3ConfGroupV10 }
    ::= { l3ConfGroupV10 1 }
 
l3ConfGroupV10  OBJECT-GROUP
   OBJECTS {
        l3FlowIndex,
        l3FlowFilterId,
        l3FlowPortOfEntry,
        l3FlowSrcIpAddress,
        l3FlowDstIpAddress,
        l3FlowTOS,
        l3FlowProtocol,
        l3FlowSrcPort,
        l3FlowDstPort,
        l3FlowPkts,
        l3FlowOctets,
        l3FlowPriorityIndex,
        l3FlowPriorityName,
        l3FlowPrioritySrcIpAddress,
        l3FlowPrioritySrcPort,
        l3FlowPriorityDstIpAddress,
        l3FlowPriorityDstPort,
        l3FlowPriorityTOS,
        l3FlowPriorityProtocol,
        l3FlowPriorityInterface,
        l3FlowPriority
}
STATUS obsolete
DESCRIPTION
  "A set of managed objects that make up version 1.0 of the SSR Layer 3 MIB"
   ::= { l3Groups 1 }
 
END