l3FlowIndex |
.1.3.6.1.4.1.52.2501.1.3.1.1.1 |
A unique number for each flow. The encoding is
as explained.
bit 0-15 = Table Index (0-64K)
bit 16-18 = Table Number (0-3)
bit 19-31 = Channel Number (0-32)
|
l3FlowFilterId |
.1.3.6.1.4.1.52.2501.1.3.1.1.2 |
A filter byte to narrow the data returned by the agent.
The number of possible flows can be extremely high. An SNMP walk
could take a significatn resources. Using a walk with a filter will narrow the
values returned to those flows matching the fields used in the index. Currently
only the first byte of this Integer is used.
This byte specifies one or more fields to compare flows in the system against the
index in the get-next request.
Big endian least significant Byte is encoding is as follows:
bit 0 : unused
bit 1 : Port Of Entry Filter mask
bit 2 : Src IP Address Filter mask
bit 3 : Dst IP Address Filter mask
bit 4 : Type Of Service Filter mask
bit 5 : Protocol Filter mask
bit 6 : Src port Filter mask
bit 7 : Dst port Filter mask
A complete walk of the mib will use the filter value of 0 as will a get Request
|
l3FlowPortOfEntry |
.1.3.6.1.4.1.52.2501.1.3.1.1.3 |
The physical port in the chassis/shelf from which this flow
enters the switch.
|
l3FlowSrcIpAddress |
.1.3.6.1.4.1.52.2501.1.3.1.1.4 |
The source IP address for this flow.
|
l3FlowDstIpAddress |
.1.3.6.1.4.1.52.2501.1.3.1.1.5 |
The destination IP address for this flow.
|
l3FlowTOS |
.1.3.6.1.4.1.52.2501.1.3.1.1.6 |
The Type Of Service for this flow.
|
l3FlowProtocol |
.1.3.6.1.4.1.52.2501.1.3.1.1.7 |
The IP protocol for this flow. Official assignments are defined in
ftp://ftp.isi.edu/in-notes/iana/assignments/protocol-numbers
|
l3FlowSrcPort |
.1.3.6.1.4.1.52.2501.1.3.1.1.8 |
The source UDP/TCP port for this flow. Official port numbers
are defined in:
ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers
|
l3FlowDstPort |
.1.3.6.1.4.1.52.2501.1.3.1.1.9 |
The destination UDP/TCP port for this flow. Official port numbers are
defined in ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers
|
l3FlowPkts |
.1.3.6.1.4.1.52.2501.1.3.1.1.10 |
The packets in this flow.
|
l3FlowOctets |
.1.3.6.1.4.1.52.2501.1.3.1.1.11 |
The number of octets in this flow.
|
l3FlowPriorityIndex |
.1.3.6.1.4.1.52.2501.1.3.2.1.1 |
The unique entry number for this flow.
|
l3FlowPriorityName |
.1.3.6.1.4.1.52.2501.1.3.2.1.2 |
A unique name for this flow. Padded with blanks to 20 bytes.
|
l3FlowPrioritySrcIpAddress |
.1.3.6.1.4.1.52.2501.1.3.2.1.3 |
The source IP address for this flow.
|
l3FlowPrioritySrcPort |
.1.3.6.1.4.1.52.2501.1.3.2.1.4 |
The source UDP/TCP port for this flow.
The Official port numbers are defined in:
ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers
|
l3FlowPriorityDstIpAddress |
.1.3.6.1.4.1.52.2501.1.3.2.1.5 |
The destination IP address for this flow.
|
l3FlowPriorityDstPort |
.1.3.6.1.4.1.52.2501.1.3.2.1.6 |
The destination UDP/TCP port for this flow.
Official port numbers are defined in
ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers
|
l3FlowPriorityTOS |
.1.3.6.1.4.1.52.2501.1.3.2.1.7 |
The Type Of Service for this flow.
|
l3FlowPriorityProtocol |
.1.3.6.1.4.1.52.2501.1.3.2.1.8 |
The IP protocol for this flow. Official assignments are defined in
ftp://ftp.isi.edu/in-notes/iana/assignments/protocol-numbers
|
l3FlowPriorityInterface |
.1.3.6.1.4.1.52.2501.1.3.2.1.9 |
The set of interfaces which are associated with this entry.
Each octet within the value of this object specifies a set of
eight interfaces, with the first octet specifying interfaces
1 through 8, the second octet specifying interfaces 9
through 16, etc. Within each octet, the most
significant bit represents the lowest numbered
interface, and the least significant bit represents the
highest numbered interface. Thus, each interface of the
switch is represented by a single bit within the
value of this object. If that bit has a value of
'1' then that interface is included in the set of
interfaces; the interface is not included if its bit has a
value of '0'.
|
l3FlowPriority |
.1.3.6.1.4.1.52.2501.1.3.2.1.10 |
The priority for this flow.
|