CTRON-SSR-SERVICE-STATUS-MIB device MIB details by Enterasys Networks Inc

CTRON-SSR-SERVICE-STATUS-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CTRON-SSR-SERVICE-STATUS-MIB.

Vendor:	Enterasys Networks Inc
Mib:	CTRON-SSR-SERVICE-STATUS-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

CTRON-SSR-SERVICE-STATUS-MIB DEFINITIONS ::= BEGIN

--  This module provides authoritative definitions for Cabletron's
--  enterprise-specific schema for accessing the
--  Smart Switch Router subsystems.
--
--  This module will be extended, as required.

--  Cabletron Systems reserves the right to make changes in
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.

--  Copyright June 1998-2000 Cabletron Systems

IMPORTS
       MODULE-IDENTITY, OBJECT-TYPE
       FROM SNMPv2-SMI
       TEXTUAL-CONVENTION        
       FROM SNMPv2-TC
       MODULE-COMPLIANCE, OBJECT-GROUP
       FROM SNMPv2-CONF
       ssrMibs
       FROM CTRON-SSR-SMI-MIB;

serviceStatusMIB MODULE-IDENTITY
   LAST-UPDATED "200007150000Z"  -- July 15, 2000
   ORGANIZATION
     "Cabletron Systems, Inc."
   CONTACT-INFO
    "Enterasys Networks
     35 Industrial Way, P.O. Box 5005
     Rochester, NH 03867-0505
     (603) 332-9400
     support@enterasys.com
     http://www.enterasys.com"
 
   DESCRIPTION
     "This module describes a schema for accessing the
      Smart Switch Router subsystems."

    REVISION     "200007150000Z"
    DESCRIPTION
         "Revision 2.0 Update contact information for Enterasys Networks as this mib
          is found on the Riverstione RS product line as well as Enterasys SSR product line."

    REVISION    "9808040000Z"
    DESCRIPTION
         "Revision 1.1 Flow Accounting Function and RMON visible."

    REVISION    "9804081200Z"
    DESCRIPTION
         "Revision 1.0 Initial mib revision."

        ::= { ssrMibs 700 }

   serviceStatusGroup  OBJECT IDENTIFIER   ::= { ssrMibs 4 }

   ServiceStatus ::= TEXTUAL-CONVENTION
       DISPLAY-HINT "d"
       STATUS       current
       DESCRIPTION
       "The current state of the service: started indicates 
        the service is configured and running. Stopped indicates
        the service is administratively down. notWorking indicates
        the service has failed."
       SYNTAX       INTEGER {
           started(1),
           stopped(2),
           notWorking(3)
       }

   serviceStatusRip  OBJECT-TYPE
       SYNTAX      ServiceStatus
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
      "The current status of RIP in the switch."
       ::= { serviceStatusGroup 1 }

   serviceStatusOspf  OBJECT-TYPE
       SYNTAX      ServiceStatus
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "The current status of OSPF in the switch."
       ::= { serviceStatusGroup 2 }

   serviceStatusBgp  OBJECT-TYPE
       SYNTAX      ServiceStatus
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "The current status of BGP in the switch."
       ::= { serviceStatusGroup 3 }

   serviceStatusDvmrp  OBJECT-TYPE
       SYNTAX      ServiceStatus
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "The current status of DVMRP in the switch."
       ::= { serviceStatusGroup 4 }

   serviceStatusIgmp  OBJECT-TYPE
       SYNTAX      ServiceStatus
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "The current status of IGMP in the switch."
       ::= { serviceStatusGroup 5 }

   serviceStatusPim  OBJECT-TYPE
       SYNTAX      ServiceStatus
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "The current status of PIM in the switch."
       ::= { serviceStatusGroup 6 }

   serviceStatusStp  OBJECT-TYPE
       SYNTAX      ServiceStatus
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "The current status of STP in the switch."
       ::= { serviceStatusGroup 7 }

   serviceStatusIpxRip  OBJECT-TYPE
       SYNTAX      ServiceStatus
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "The current status of IPX in the switch."
       ::= { serviceStatusGroup 8 }

   serviceStatusIpxSap  OBJECT-TYPE
       SYNTAX      ServiceStatus
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "The current status of IPX in the switch."
       ::= { serviceStatusGroup 9 }

   serviceStatusLfap  OBJECT-TYPE
       SYNTAX      ServiceStatus
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "The current status of Lightweight Flow Accounting Protocol."
       ::= { serviceStatusGroup 10 }

   serviceStatusRmon  OBJECT-TYPE
       SYNTAX      ServiceStatus
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "The current status of RMON."
       ::= { serviceStatusGroup 11 }

-- ### Compliance ###
 
ssConformance OBJECT IDENTIFIER ::= { serviceStatusMIB 2 }
ssCompliances OBJECT IDENTIFIER ::= { ssConformance 1 }
ssGroups OBJECT IDENTIFIER ::= { ssConformance 2 }
 
ssComplianceV10 MODULE-COMPLIANCE
    STATUS obsolete
    DESCRIPTION
            "The compliance statement for the CTRON-SSR-SERVICE-STATUS-MIB."
    MODULE  -- this module
    ::= { ssConfGroupV10 1 }

ssComplianceV11 MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
            "The compliance statement for the CTRON-SSR-SERVICE-STATUS-MIB."
    MODULE  -- this module
        MANDATORY-GROUPS { ssConfGroupV11 }
    ::= { ssConfGroupV10 2 }

-- first release, now historic
ssConfGroupV10  OBJECT-GROUP
   OBJECTS {
        serviceStatusRip,
        serviceStatusOspf,
        serviceStatusBgp,
        serviceStatusDvmrp,
        serviceStatusIgmp,
        serviceStatusPim,
        serviceStatusStp,
        serviceStatusIpxRip,
        serviceStatusIpxSap
}
STATUS obsolete
DESCRIPTION
  "A set of managed objects that make up version 1.0 of the SSR Service Status mib."
   ::= { ssGroups 1 }
 
ssConfGroupV11  OBJECT-GROUP
   OBJECTS {
        serviceStatusRip,
        serviceStatusOspf,
        serviceStatusBgp,
        serviceStatusDvmrp,
        serviceStatusIgmp,
        serviceStatusPim,
        serviceStatusStp,
        serviceStatusIpxRip,
        serviceStatusIpxSap,
        serviceStatusLfap,
        serviceStatusRmon  
}
STATUS current
DESCRIPTION
  "A set of managed objects that make up version 1.1 of the SSR Service Status mib."
   ::= { ssGroups 2 }

END