AD | Application | AWS | Azure | Cloud | Database | Enterprise | Environmental | Event Log | File System | IoT | IT Service | Network/System | Infra | Performance | Protocol | SaaS | Security | Service Level | Storage | Linux | VMware | VoIP | Web | Wireless | SNMP

Crumbtrail

MonitorTools.com » Technical documentation » SNMP » MIB » Enterasys-Networks-Inc » CTRON-SSR-TRAP-MIB » Objects

CTRON-SSR-TRAP-MIB.mib object view, vendor Enterasys-Networks-Inc

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2024 can import MIB file CTRON-SSR-TRAP-MIB and use it to monitor vendor specific OID's.

CTRON-SSR-TRAP-MIB file content

Object view of CTRON-SSR-TRAP-MIB:

Trap
envPowerSupplyFailed .1.3.6.1.4.1.52.2501.10.2.1
A power supply on the sending device has failed. The sysHwPowerSupply object identifies the failed supply.
envPowerSupplyRecovered .1.3.6.1.4.1.52.2501.10.2.2
A power supply on the sending device has recovered after failure. The sysHwPowerSupply object identifies the recovered supply.
envFanFailed .1.3.6.1.4.1.52.2501.10.2.3
A Fan tray on the sending device has failed. The sysHwFan object identifies the failed fan tray.
envFanRecovered .1.3.6.1.4.1.52.2501.10.2.4
A Fan tray on the sending device has recovered after failure. The sysHwFan object identifies the recovered Fan tray.
envTempExceeded .1.3.6.1.4.1.52.2501.10.2.5
A temperature inside the chassis on the sending device has exceeded normal operating temperature. The sysHwTemperature object identifies the current status.
envTempNormal .1.3.6.1.4.1.52.2501.10.2.6
A temperature inside the chassis on the sending device has returned to normal operating temperature. The sysHwTemperature object identifies the current status.
envHotSwapIn .1.3.6.1.4.1.52.2501.10.2.7
A module has been inserted into the chassis. sysHwModuleSlotNumber identifies the slot the module was inserted into.
envHotSwapOut .1.3.6.1.4.1.52.2501.10.2.8
A module has been turned off or removed from the chassis. sysHwModuleSlotNumber identifies the slot the module was removed from.
envBackupControlModuleOnline .1.3.6.1.4.1.52.2501.10.2.9
A backup control module that was in standby mode has taken over for a failed primary control module. Poll sysHwControlModuleBackupState for current state of backup control module. sysHwModuleSlotNumber is the index into the sysHwModuleTable for the now active control module.
envBackupControlModuleFailure .1.3.6.1.4.1.52.2501.10.2.10
A backup control module that was in standby mode has changed to inactive or notInstalled. Poll sysHwControlModuleBackupState for current state of backup control module.
envLineModuleFailure .1.3.6.1.4.1.52.2501.10.2.11
A line card module which was in the online state changed to the offline state indicating an error condition.
envCPUThresholdExceeded .1.3.6.1.4.1.52.2501.10.2.12
The CPU utilization has exceeded the value of capCPUMaxThreshold after having been below the value of capCPUMinThreshold. Once this trap has occurred it will not occurred again until the utilization has dropped below capCPUMinThreshold. Poll capCPUMinThreshold and capCPUMaxThreshold to determine the configured threshold settings.
polAclDenied .1.3.6.1.4.1.52.2501.10.3.0.1
The polAclDenied trap indicates that a message was dropped because of a 'deny' ACL. The polAclName and polAclItem identify the entry in the polAclTable. The ifIndex value identifies the interface on which the deny ACL was applied.
Object Identifier
ssrTrapsMIB .1.3.6.1.4.1.52.2501.1.300
This module describes the traps specific to the Smart Switch Router.
trapControl .1.3.6.1.4.1.52.2501.10.1
envTrapGroup .1.3.6.1.4.1.52.2501.10.2
polTrapGroup .1.3.6.1.4.1.52.2501.10.3
polNotifications .1.3.6.1.4.1.52.2501.10.3.0
ssrTrapsConformance .1.3.6.1.4.1.52.2501.1.300.2
ssrTrapsCompliances .1.3.6.1.4.1.52.2501.1.300.2.1
ssrTrapsGroups .1.3.6.1.4.1.52.2501.1.300.2.2
Group
ssrTrapsConfGroupV10 .1.3.6.1.4.1.52.2501.1.300.2.2.1
A set of managed objects that make up version 1.0 of the SSR Trap MIB.
ssrTrapsConfGroupV20 .1.3.6.1.4.1.52.2501.1.300.2.2.2
A set of managed objects that make up version 2.0 of the SSR Trap MIB.
ssrTrapsConfGroupV30 .1.3.6.1.4.1.52.2501.1.300.2.2.3
A set of managed objects that make up version 3.0 of the SSR Trap MIB.
ssrTrapsConfGroupV40 .1.3.6.1.4.1.52.2501.1.300.2.2.4
A set of managed objects that make up version 4.0 of the SSR Trap MIB.
ssrTrapsConfGroupV50 .1.3.6.1.4.1.52.2501.1.300.2.2.5
A set of managed objects that make up version 5.0 of the SSR Trap MIB.