CTSMTMIB-MIB device MIB details by Enterasys Networks Inc
CTSMTMIB-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CTSMTMIB-MIB.
| Vendor: | Enterasys Networks Inc |
|---|---|
| Mib: | CTSMTMIB-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
CTSMTMIB-MIB DEFINITIONS ::= BEGIN -- Ctron SMT MIB -- Revision: 1.03.02 -- Date: April 18, 1997 -- Part Number: 2170563-01 -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for part -- of the naming tree below: -- -- cabletron { enterprises 52 } -- -- This module will be extended, as additional sub-sections -- of this naming tree are defined. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright August 95 Cabletron Systems IMPORTS Counter FROM RFC1155-SMI ctsmtmib FROM CTRON-MIB-NAMES OBJECT-TYPE FROM RFC-1212; ctsmtmibRingTable OBJECT-TYPE SYNTAX SEQUENCE OF CtsmtmibRingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of fddi nodes found on the ring." ::= { ctsmtmib 1 } ctsmtmibRingEntry OBJECT-TYPE SYNTAX CtsmtmibRingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A fddi ring entry containing information common to all stations in a token path." INDEX { ctsmtmibRingSmtIndex, ctsmtmibRingMacIndex, ctsmtmibRingNodeIndex, ctsmtmibRingMacAddr } ::= { ctsmtmibRingTable 1 } CtsmtmibRingEntry ::= SEQUENCE { ctsmtmibRingSmtIndex INTEGER, ctsmtmibRingMacIndex INTEGER, ctsmtmibRingNodeIndex INTEGER, ctsmtmibRingMacAddr OCTET STRING, ctsmtmibRingUpStreamAddr OCTET STRING, ctsmtmibRingNodeClass INTEGER, ctsmtmibRingMacCount INTEGER, ctsmtmibRingNonMasterCount INTEGER, ctsmtmibRingMasterCount INTEGER, ctsmtmibRingTopology INTEGER, ctsmtmibRingDuplicate INTEGER } ctsmtmibRingSmtIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of the SMT index associated with this ring." ::= { ctsmtmibRingEntry 1 } ctsmtmibRingMacIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each MAC within a given SMT." ::= { ctsmtmibRingEntry 2 } ctsmtmibRingNodeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the node on the ring in reverse token flow order. It is sequential from 1 to n where n is the number of nodes on the ring at a given time." ::= { ctsmtmibRingEntry 3 } ctsmtmibRingMacAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "A canonical representation of the MAC address of the node." ::= { ctsmtmibRingEntry 4 } ctsmtmibRingUpStreamAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "This is a canonical representation of the upstream neighbor's address. The upstream neighbor is the last MAC to receive the token before this MAC. Unknown addresses should be specified as 00-00-F8-00-00-00." ::= { ctsmtmibRingEntry 5 } ctsmtmibRingNodeClass OBJECT-TYPE SYNTAX INTEGER { station (1), concentrator (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Reports if the node is a station or a concentrator." ::= { ctsmtmibRingEntry 6 } ctsmtmibRingMacCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of MACs on this FDDI node." ::= { ctsmtmibRingEntry 7 } ctsmtmibRingNonMasterCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The sum of all A ports, B ports, and S ports on this node." ::= { ctsmtmibRingEntry 8 } ctsmtmibRingMasterCount OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The number of master ports on this node." ::= { ctsmtmibRingEntry 9 } ctsmtmibRingTopology OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A bit mapped representation of the current state of the node. if state: Add 2**n where n = Wrapped Node 0 Unattached Concentrator 1 A-A Twisted Ring 2 B-B Twisted Ring 3 Rooted Station 4 SRF Supported 5 where Wrapped Node: is set when the node's cf-state is Wrap-A, Wrap-B, Wrap-C, or Wrap-AB. Unattached Concentrator: is set when a concentrator has no active A, B, or S ports. A-A Twisted Ring: is set when this node's A port is connected to another A port. B-B Twisted Ring: is set when this node's B port is connected to another B port. Rooted Station: is a station with ports A, B and S, not active in tree mode. SRF Supported: This node adheres to the status reporting frame protocol." ::= { ctsmtmibRingEntry 10 } ctsmtmibRingDuplicate OBJECT-TYPE SYNTAX INTEGER (0..2) ACCESS read-only STATUS mandatory DESCRIPTION "A bit mapped representation of duplicate address information. if State: Add 2**n where n= My Duplicate: 0 UNA Duplicate: 1 where My Duplicate: This node determines that it's MAC address is same as the MAC address for another node on the ring. UNA Duplicate: The upstream neighbor of this node has determined that its's MAC address is same as the MAC address for another node on the ring." ::= { ctsmtmibRingEntry 11 } ctsmtmibMacTable OBJECT-TYPE SYNTAX SEQUENCE OF CtsmtmibMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of MAC entries. The total number of entries is given by the value of ctsmtmibRingMacCount with appropriate ctsmtmibRingMacAddr." ::= { ctsmtmib 2 } ctsmtmibMacEntry OBJECT-TYPE SYNTAX CtsmtmibMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A MAC entry containing information pertaining to a given MAC." INDEX { ctsmtmibMacSmtIndex, ctsmtmibMacIndex } ::= { ctsmtmibMacTable 1 } CtsmtmibMacEntry ::= SEQUENCE { ctsmtmibMacSmtIndex INTEGER, ctsmtmibMacIndex INTEGER, ctsmtmibMacNifTxCts Counter, ctsmtmibMacNifRxCts Counter, ctsmtmibMacSifTxCts Counter, ctsmtmibMacSifRxCts Counter, ctsmtmibMacEcfTxCts Counter, ctsmtmibMacEcfRxCts Counter, ctsmtmibMacPmfTxCts Counter, ctsmtmibMacPmfRxCts Counter, ctsmtmibMacRdfTxCts Counter, ctsmtmibMacRdfRxCts Counter, ctsmtmibMacRingOpCts Counter, ctsmtmibMacTxCts Counter, ctsmtmibMacRingMapUpdateCts Counter, ctsmtmibMacAutoNegotiation INTEGER } ctsmtmibMacSmtIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of the SMT Index associated with this MAC." ::= { ctsmtmibMacEntry 1 } ctsmtmibMacIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each MAC within a given SMT." ::= { ctsmtmibMacEntry 2 } ctsmtmibMacNifTxCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of Neighborhood Information frames transmitted by the MAC." ::= { ctsmtmibMacEntry 3 } ctsmtmibMacNifRxCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of Neighborhood Information frames received by the MAC." ::= { ctsmtmibMacEntry 4 } ctsmtmibMacSifTxCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of Status Information frames transmitted by the MAC." ::= { ctsmtmibMacEntry 5 } ctsmtmibMacSifRxCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of Status Information Frames received by the MAC." ::= { ctsmtmibMacEntry 6 } ctsmtmibMacEcfTxCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of Echo Frames transmitted by the MAC." ::= { ctsmtmibMacEntry 7 } ctsmtmibMacEcfRxCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of Echo Frames received by the MAC." ::= { ctsmtmibMacEntry 8 } ctsmtmibMacPmfTxCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of Parameter Management Frames transmitted by the MAC." ::= { ctsmtmibMacEntry 9 } ctsmtmibMacPmfRxCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of Parameter Management Frames received by the MAC." ::= { ctsmtmibMacEntry 10 } ctsmtmibMacRdfTxCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of Request Denied Frames transmitted by the MAC." ::= { ctsmtmibMacEntry 11 } ctsmtmibMacRdfRxCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of Request Denied Frames received by the MAC." ::= { ctsmtmibMacEntry 12 } ctsmtmibMacRingOpCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the number of times the ring has entered 'Ring Operational' state from the 'Ring Not Operational' state." ::= { ctsmtmibMacEntry 13 } ctsmtmibMacTxCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count that should as closely as possible match the number of frames transmitted by this MAC." ::= { ctsmtmibMacEntry 14 } ctsmtmibMacRingMapUpdateCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the number of times the ring map table has been updated." ::= { ctsmtmibMacEntry 15 } ctsmtmibMacAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the station has auto-negotiation enabled or disabled." ::= { ctsmtmibMacEntry 16 } ctsmtmibAttachmentNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The total number of attachments (across all SMTs) on this network management application entity. The value for this variable must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { ctsmtmib 3 } ctsmtmibAttachmentTable OBJECT-TYPE SYNTAX SEQUENCE OF CtsmtmibAttachmentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Attachment entries. The number of entries is given by the value of fdmimAttachmentNumber." ::= { ctsmtmib 4 } ctsmtmibAttachmentEntry OBJECT-TYPE SYNTAX CtsmtmibAttachmentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An Attachment entry containing information common to a given set of Attachments. There is a natural association of Attachment resource indices to the PORT Indices. The resource index for the Attachment is equal to the associated port index for 'single-attachment' and 'concentrator' type fdmimAttachmentClasses. For 'dual-attachment' classes, the Attachment Index is the PORT Index of the A PORT of the A/B PORT pair that represents the Attachment." INDEX { ctsmtmibAttachmentSMTIndex, ctsmtmibAttachmentIndex } ::= { ctsmtmibAttachmentTable 1 } CtsmtmibAttachmentEntry ::= SEQUENCE { ctsmtmibAttachmentSMTIndex INTEGER, ctsmtmibAttachmentIndex INTEGER, ctsmtmibAttachmentClass INTEGER, ctsmtmibAttachmentOpticalBypassPresent INTEGER, ctsmtmibAttachmentIMaxExpiration INTEGER, ctsmtmibAttachmentInsertedStatus INTEGER, ctsmtmibAttachmentInsertPolicy INTEGER } ctsmtmibAttachmentSMTIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The value of the SMT index associated with this Attachment." ::= { ctsmtmibAttachmentEntry 1 } ctsmtmibAttachmentIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each Attachment on a given SMT. " ::= { ctsmtmibAttachmentEntry 2 } ctsmtmibAttachmentClass OBJECT-TYPE SYNTAX INTEGER { single-attachment(1), dual-attachment(2), concentrator(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The Attachment class. This represents a PORT or a pair of PORTs plus the associated optional optical bypass that are managed as a functional unit. The PORT associations are the following unit. single-attachment - S Ports dual-attachment - A/B Port pairs concentrator - M Ports " ::= { ctsmtmibAttachmentEntry 3 } ctsmtmibAttachmentOpticalBypassPresent OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this is false for 'single-attachment' . Correct operation of CMT for single-attachments requires that a bypass function must not loopback the network side of the MIC, but only the node side." ::= { ctsmtmibAttachmentEntry 4 } ctsmtmibAttachmentIMaxExpiration OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "I_Max (refer to ANSI SMT 9.4.4.2.1). Systems not implementing optical bypass should return a value of 0. Else the value should be returned in the granularity of 80ns." ::= { ctsmtmibAttachmentEntry 5 } ctsmtmibAttachmentInsertedStatus OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), unimplemented(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the attachment is currently inserted in the node." ::= { ctsmtmibAttachmentEntry 6 } ctsmtmibAttachmentInsertPolicy OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), unimplemented(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the Insert Policy for this Attachment." ::= { ctsmtmibAttachmentEntry 7 } ctsmtmibSMTTable OBJECT-TYPE SYNTAX SEQUENCE OF CtsmtmibSMTEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes the dual homed status for SMT entries." ::= { ctsmtmib 5 } ctsmtmibSMTEntry OBJECT-TYPE SYNTAX CtsmtmibSMTEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A specific dual homed SMT entry." INDEX { ctsmtmibSmtIndex } ::= { ctsmtmibSMTTable 1 } CtsmtmibSMTEntry ::= SEQUENCE { ctsmtmibSMTDualHomeStatus INTEGER, ctsmtmibSMTDualHomeWrpLEDStatus INTEGER, ctsmtmibSmtIndex INTEGER } ctsmtmibSMTDualHomeStatus OBJECT-TYPE SYNTAX INTEGER { notDualHomed(1), linkAorB(2), linkAandB(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current dual homed link status for a given SMT instance. notDualHomed(1) - This SMT is not dual homed. linkAorB(2) - Dual homed with link on A and no link link on B, or link on B and no link on A. linkAandB(3) - Dual homed with link on A and B." ::= { ctsmtmibSMTEntry 1} ctsmtmibSMTDualHomeWrpLEDStatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When on, the WRAP LED will be illuminated when the node is in a dual homed configuration with link on the A, B or both A and B ports. When off, the WRAP LED will not be illuminated when the node is in a dual homed configuration with link on A and B, but will be illuminated when in a dual homed configuration with no link on A or B." DEFVAL { on } ::= { ctsmtmibSMTEntry 2} ctsmtmibSmtIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the particular SMT entry." ::= { ctsmtmibSMTEntry 3 } END