DOT5-PHYS-MIB device MIB details by Enterasys Networks Inc
DOT5-PHYS-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing DOT5-PHYS-MIB.
| Vendor: | Enterasys Networks Inc |
|---|---|
| Mib: | DOT5-PHYS-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
DOT5-PHYS-MIB DEFINITIONS ::= BEGIN -- dot5-phys-mib.txt -- Revision: 1.02.00 -- Part Number: 2170990 -- Date: August 14, 1995 -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for Cabletron's -- enterprise-specific physical chassis management MIB -- for Token Ring devices. -- -- This module will be extended, as required. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright (c)1995 Cabletron Systems -- IMPORTS TimeTicks, Counter FROM RFC1155-SMI ctDot5PhysMgmt FROM CTRON-MIB-NAMES DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; -- Textual convention -- DisplayString ::= OCTET STRING -- This is a listing of the different chassis physical management nodes-- dot5PhysMgmtRev1 OBJECT IDENTIFIER ::= { ctDot5PhysMgmt 1 } dot5PhysMgmtDevice OBJECT IDENTIFIER ::= { dot5PhysMgmtRev1 1 } dot5PhysMgmtBoard OBJECT IDENTIFIER ::= { dot5PhysMgmtRev1 2 } dot5PhysMgmtPort OBJECT IDENTIFIER ::= { dot5PhysMgmtRev1 3 } dot5PhysMgmtPortCommon OBJECT IDENTIFIER ::= { dot5PhysMgmtPort 1 } dot5PhysMgmtPortStn OBJECT IDENTIFIER ::= { dot5PhysMgmtPort 2 } dot5PhysMgmtPortRing OBJECT IDENTIFIER ::= { dot5PhysMgmtPort 3 } dot5PhysMgmtPortSwitch OBJECT IDENTIFIER ::= { dot5PhysMgmtPort 4 } dot5PhysMgmtRingSpeedTables OBJECT IDENTIFIER ::= { dot5PhysMgmtRev1 4 } -- -- ============================================================ -- -- A "Token Ring Device" is an intelligent, manageable device -- providing at least one token ring interface and hosting an -- SNMP agent addressed via an assignable network address. -- -- The term "manage", and all of its derived forms, are used -- to describe the ability of a device to alter the state of -- a MIM board and/or the ports residing on a MIM board. -- -- In the managed object descriptions that follow there may be -- references to a board or a port falling within the domain of -- a device. A device's domain is governed by a set of rules -- used to determine whether a MIM board may be managed by a -- given device. FNB connectivity, MIM board media type, and -- the availability of alternate MIM board managers are all -- used to ascertain whether a given device may manage a given -- MIM board. -- -- Write Requests: -- Should a MIM board lie within the domain of a managing device, -- that device will be able to administer the write requests for -- a given managed object to the respective MIM board and that -- MIM board's ports. If the MIM board lies outside the domain -- of a managing device, all write requests will fail. -- -- Read Requests: -- Should a MIM board lie within the domain of a managing device, -- that device will be able to administer the read requests for -- a given managed object to the respective MIM board and that -- MIM board's ports. If the MIM board lies outside the domain -- of a managing device, some read requests will be honored while -- others won't. Those that won't are clearly defined within -- the descriptions of the managed objects themselves. -- -- ============================================================ -- -- ============================================================ -- -- Managed Objects in Support of Dot5 Physical Management for Token Ring Devices -- -- ============================================================ -- -- Implementation of this group of objects is mandatory. -- -- ============================================================ dot5PhysMgmtDeviceRingCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of rings passing through the chassis of which the token ring device is aware. All of these rings may or may not be administratively or statistically manageable." ::= { dot5PhysMgmtDevice 1 } dot5PhysMgmtDevicePortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of token ring ports contained within the chassis in which the managing device resides. This count does not include unpopulated TPIM slots, nor does it include ports residing on MIM boards outside of the domain of the managing device." ::= { dot5PhysMgmtDevice 2 } dot5PhysMgmtDevicePortsEnable OBJECT-TYPE SYNTAX INTEGER { noEnable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to enable will cause all the token ring ports residing within the domain of this device to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable." ::= { dot5PhysMgmtDevice 3 } dot5PhysMgmtDevicePortsOn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of administratively enabled token ring ports contained within the chassis in which the managing device resides. This count does not include ports residing on MIM boards outside of the domain of the managing device." ::= { dot5PhysMgmtDevice 4} dot5PhysMgmtDevicePortsOper OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of operational token ring ports contained within the chassis in which the managing device resides. This count does not include ports residing on MIM boards outside of the domain of the managing device." ::= { dot5PhysMgmtDevice 5 } dot5PhysMgmtDeviceStnPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of token ring station ports contained within the chassis in which the managing device resides. This count does not include ports residing on MIM boards outside of the domain of the managing device." ::= { dot5PhysMgmtDevice 6 } dot5PhysMgmtDeviceStnPortsEnable OBJECT-TYPE SYNTAX INTEGER { noEnable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to enable will cause all the token ring station ports residing within the domain of this device to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable." ::= { dot5PhysMgmtDevice 7 } dot5PhysMgmtDeviceStnPortsOn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of administratively enabled token ring station ports contained within the chassis in which the managing device resides. This count does not include ports residing on MIM boards outside of the domain of the managing device." ::= { dot5PhysMgmtDevice 8 } dot5PhysMgmtDeviceRingPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of token ring ring in/ring out ports contained within the chassis in which the managing device resides. This count does not include unpopulated TPIM slots nor does it include ports residing on MIM boards outside of the domain of the managing device." ::= { dot5PhysMgmtDevice 9 } dot5PhysMgmtDeviceRingPortsEnable OBJECT-TYPE SYNTAX INTEGER { noEnable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to enable will cause all the token ring ring in/ring out ports residing within the domain of this device to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable." ::= { dot5PhysMgmtDevice 10 } dot5PhysMgmtDeviceRingPortsOn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of administratively enabled token ring ring in/ring out ports contained within the chassis in which this device resides. This count does not include ports residing on MIM boards outside of the domain of the managing device." ::= { dot5PhysMgmtDevice 11 } dot5PhysMgmtDevicePortAssociationChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object is incremented every time the port association changes for a token ring port residing on a MIM board contained within the chassis in which the managing device resides. This count does not include port association changes for ports residing on MIM boards outside of the domain of the managing device." ::= { dot5PhysMgmtDevice 12 } -- -- ============================================================ -- -- Managed Objects in Support of Dot5 Physical Management for MIMs -- -- ============================================================ -- -- Implementation of this table is mandatory. -- -- ============================================================ dot5PhysMgmtBoardTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot5PhysMgmtBoardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of managed objects which pertains to a collection of boards physically residing in the chassis in which a token ring device also resides." ::= { dot5PhysMgmtBoard 1 } dot5PhysMgmtBoardEntry OBJECT-TYPE SYNTAX Dot5PhysMgmtBoardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of managed objects which pertains to a single instance of a board physically residing in the chassis in which a token ring device also resides." INDEX { dot5PhysMgmtBoardId } ::= { dot5PhysMgmtBoardTable 1 } Dot5PhysMgmtBoardEntry ::= SEQUENCE { dot5PhysMgmtBoardId INTEGER, dot5PhysMgmtBoardDomain INTEGER, dot5PhysMgmtBoardName DisplayString, dot5PhysMgmtBoardDesc DisplayString, dot5PhysMgmtBoardDot5PortCount INTEGER, dot5PhysMgmtBoardDot5PortsEnable INTEGER, dot5PhysMgmtBoardDot5PortsOn INTEGER, dot5PhysMgmtBoardDot5PortsOper INTEGER, dot5PhysMgmtBoardDot5StnPortCount INTEGER, dot5PhysMgmtBoardDot5StnPortsEnable INTEGER, dot5PhysMgmtBoardDot5StnPortsOn INTEGER, dot5PhysMgmtBoardDot5RingPortCount INTEGER, dot5PhysMgmtBoardDot5RingPortsEnable INTEGER, dot5PhysMgmtBoardDot5RingPortsOn INTEGER, dot5PhysMgmtBoardMode INTEGER, dot5PhysMgmtBoardSpeed INTEGER, dot5PhysMgmtBoardSpeedFault INTEGER, dot5PhysMgmtBoardSpeedFaultLocation INTEGER, dot5PhysMgmtBoardPortAssociation INTEGER, dot5PhysMgmtBoardPortAssociationChanges Counter } dot5PhysMgmtBoardId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a MIM board for which the information in this table pertains." ::= { dot5PhysMgmtBoardEntry 1 } dot5PhysMgmtBoardDomain OBJECT-TYPE SYNTAX INTEGER { outsideDomain(1), withinDomain(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Returns an indication of the manageability of this MIM by the device being addressed. If the value outsideDomain is returned, then any write requests to this MIM will result in an SNMP error BadValue being returned. If the value withinDomain is returned, then the MIM may be managed via write requests." ::= { dot5PhysMgmtBoardEntry 2 } dot5PhysMgmtBoardName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) ACCESS read-write STATUS mandatory DESCRIPTION "The ASCII name assigned to this MIM board. This name defaults to 'Board n', where n is a unique integer value from 1 to n which corelates to the physical chassis slot the board resides in." ::= { dot5PhysMgmtBoardEntry 3 } dot5PhysMgmtBoardDesc OBJECT-TYPE SYNTAX DisplayString (SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "An ASCII string which describes this type of MIM board. For example, an MT8MIM would be described as 'MT8MIM' and a TRRMIM-2A would be described as 'TRR2A', etc." ::= { dot5PhysMgmtBoardEntry 4 } dot5PhysMgmtBoardDot5PortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of token ring ports contained on the board. This count does not include unpopulated TPIM slots. If this MIM falls outside of the domain of the managing device, then this count will be zero." ::= { dot5PhysMgmtBoardEntry 5} dot5PhysMgmtBoardDot5PortsEnable OBJECT-TYPE SYNTAX INTEGER { noEnable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to enable will cause all the token ring ports residing on this MIM board to be enabled, provided this MIM falls within the domain of the device. If the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. Setting this object to noEnable will have no effect. When read this object will always return noEnable." ::= { dot5PhysMgmtBoardEntry 6} dot5PhysMgmtBoardDot5PortsOn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of administratively enabled token ring ports residing on this MIM board. If this MIM falls outside of the domain of the managing device, then this count will be zero." ::= { dot5PhysMgmtBoardEntry 7} dot5PhysMgmtBoardDot5PortsOper OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of operational token ring ports residing on this MIM board. If this MIM falls outside of the domain of the managing device, then this count will be zero." ::= { dot5PhysMgmtBoardEntry 8} dot5PhysMgmtBoardDot5StnPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of token ring station ports contained on the board. If this MIM falls outside of the domain of the managing device, then this count will be zero." ::= { dot5PhysMgmtBoardEntry 9 } dot5PhysMgmtBoardDot5StnPortsEnable OBJECT-TYPE SYNTAX INTEGER { noEnable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to enable will cause all the token ring station ports residing on this MIM board to be enabled, provided this MIM falls within the domain of the device. If the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. Setting this object to noEnable will have no effect. When read this object will always return noEnable." ::= { dot5PhysMgmtBoardEntry 10 } dot5PhysMgmtBoardDot5StnPortsOn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of adminstratively enabled token ring station ports residing on this MIM board. If this MIM falls outside of the domain of the managing device, then this count will be zero." ::= { dot5PhysMgmtBoardEntry 11 } dot5PhysMgmtBoardDot5RingPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of token ring ring in/ring out ports contained on the board. This count does not include unpopulated TPIM slots. If this MIM falls outside of the domain of the managing device, then this count will be zero." ::= { dot5PhysMgmtBoardEntry 12 } dot5PhysMgmtBoardDot5RingPortsEnable OBJECT-TYPE SYNTAX INTEGER { noEnable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to enable will cause all the token ring ring in/ring out ports residing on this MIM board to be enabled, provided this MIM falls within the domain of the device. If the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. Setting this object to noEnable will have no effect. When read this object will always return noEnable." ::= { dot5PhysMgmtBoardEntry 13 } dot5PhysMgmtBoardDot5RingPortsOn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of adminstratively enabled token ring ring in/ring out ports residing on this MIM board. If this MIM falls outside of the domain of the managing device, then this count will be zero." ::= { dot5PhysMgmtBoardEntry 14 } dot5PhysMgmtBoardMode OBJECT-TYPE SYNTAX INTEGER { managementMode(1), autoMode(2), unknown(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the mode of the board. In Auto Mode, the board is using its hardware defaults. The default values of the board are all ports enabled, speed selected by the HW jumper on the board, the FNB attempts to attach left and right and not bypassed, ring port phantom current (if applicable) is controlled via a HW switch, and selectable media (if applicable) is managed also via a HW switch. In Management Mode, the hardware defaults may be overridden by network or local management. If the mode of the board is indeterminate, such as an Ethernet MIM, then the value unknown is returned. A write to this object will place the board into either management or auto mode, provided this MIM falls within the domain of the device. If the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. A write request with the value unknown also returns the SNMP error BadValue." ::= { dot5PhysMgmtBoardEntry 15 } dot5PhysMgmtBoardSpeed OBJECT-TYPE SYNTAX INTEGER { unknown(1), fourMegaBits(4), tenMegaBits(10), sixteenMegaBits(16), hundredMegaBits(100) } ACCESS read-write STATUS mandatory DESCRIPTION "This object sets the data speed of the board. On devices with a MAC interface, on MIM boards in which the data speed cannot be set, or on MIMs which reside outside of the domain of the managing device, this object is read-only, and will return the SNMP error BadValue on a write request." ::= { dot5PhysMgmtBoardEntry 16 } dot5PhysMgmtBoardSpeedFault OBJECT-TYPE SYNTAX INTEGER { noFaultDetected(1), faultDetected(2), notSupported(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reports a ring speed fault on a MIM board, if applicable. If the MIM cannot detect speed faults, such as an Ethernet MIM, then the value notSupported is returned.." ::= { dot5PhysMgmtBoardEntry 17 } dot5PhysMgmtBoardSpeedFaultLocation OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), fnb(2), ringIn(3), ringOut(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the last ring speed fault detection circuit(s) to detect the fault, if there was one. On MIM boards which cannot detect speed faults, such as an Ethernet MIM, the value notApplicable is returned." ::= { dot5PhysMgmtBoardEntry 18 } dot5PhysMgmtBoardPortAssociation OBJECT-TYPE SYNTAX INTEGER ( 0..255 ) ACCESS read-write STATUS mandatory DESCRIPTION "This object, when written, would associate all of the ports on the board with the selected ring, provided this option is available for this MIM and this MIM lies within the domain of the managing device. If this option is not available, or should the MIM lie outside of the domain of the managing device, any write requests will result in the SNMP error BadValue being returned. When read, this object will return either a value indicating which ring all the ports on the board are associated with or notAvailable if this function is not supported. If the MIM lies outside of the domain of the managing device, all read requests will return notAvailable. 0 - MIM does not support function 1..200 - Fnb ring 1 to Fnb ring 200 201..254 - AUX ring 1 to AUX ring 54 255 - All ports are not on the same ring" ::= { dot5PhysMgmtBoardEntry 19 } dot5PhysMgmtBoardPortAssociationChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object is incremented every time the port association changes for a token ring port residing on this MIM board. If this MIM falls outside of the domain of the managing device, then this count will remain zero." ::= { dot5PhysMgmtBoardEntry 20 } -- -- ============================================================ -- -- Managed Objects in Support of Dot5 Physical Management for All Token Ring Ports -- -- ============================================================ -- -- Implementation of this table is mandatory. -- -- If the MIM on which a port may reside falls outside of the -- domain of the managing device, then no managed objects will -- exist for the port. -- -- ============================================================ dot5PhysMgmtPortCommonTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot5PhysMgmtPortCommonEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of managed objects which pertains to a collection of token ring ports physically residing on a MIM board resident in a chassis with this device." ::= { dot5PhysMgmtPortCommon 1 } dot5PhysMgmtPortCommonEntry OBJECT-TYPE SYNTAX Dot5PhysMgmtPortCommonEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of managed objects which pertains to a single instance of a token ring port physically residing on a MIM board resident in a chassis with this device." INDEX { dot5PhysMgmtPortCommonBoardId, dot5PhysMgmtPortCommonPortId } ::= { dot5PhysMgmtPortCommonTable 1 } Dot5PhysMgmtPortCommonEntry ::= SEQUENCE { dot5PhysMgmtPortCommonPortId INTEGER, dot5PhysMgmtPortCommonBoardId INTEGER, dot5PhysMgmtPortCommonPortName DisplayString, dot5PhysMgmtPortCommonPortAdminState INTEGER, dot5PhysMgmtPortCommonPortOperState INTEGER, dot5PhysMgmtPortCommonPortType OBJECT IDENTIFIER, dot5PhysMgmtPortCommonSpeedFaultDetect INTEGER, dot5PhysMgmtPortCommonRingOutEnable INTEGER, dot5PhysMgmtPortCommonPortAssociation INTEGER, dot5PhysMgmtPortCommonMauCompId INTEGER } dot5PhysMgmtPortCommonPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a token ring port for which the information in this table pertains." ::= { dot5PhysMgmtPortCommonEntry 1 } dot5PhysMgmtPortCommonBoardId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a MIM board to which the token ring port belongs for which the information in this table pertains." ::= { dot5PhysMgmtPortCommonEntry 2 } dot5PhysMgmtPortCommonPortName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) ACCESS read-write STATUS mandatory DESCRIPTION "Sets an ASCII name for this token ring port, provided the MIM on which this port is resident falls within the domain of the device. If the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. The default name for this object is 'Board b, Port p', where b and p are unique integers 1 through n. When read, this object will return the ASCII name which is assigned to this port." ::= { dot5PhysMgmtPortCommonEntry 3 } dot5PhysMgmtPortCommonPortAdminState OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to enable or disable will cause this token ring port to be enabled or disabled, respectively, provided the MIM on which this port is resident falls within the domain of the device. If the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. When read this object will always return the last administrative request made." ::= { dot5PhysMgmtPortCommonEntry 4 } dot5PhysMgmtPortCommonPortOperState OBJECT-TYPE SYNTAX INTEGER { notOperational(1), operational(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Returns the operational state of this token ring port." ::= { dot5PhysMgmtPortCommonEntry 5 } dot5PhysMgmtPortCommonPortType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely defines the token ring station or ring port type. An authoritative identification for a token ring station or ring port type. By convention, this value is allocated within the SMI enterprises subtree (1.3.6.1.4.1), and provides an easy and unambiguous means to determine the type of a token ring station or ring port." ::= { dot5PhysMgmtPortCommonEntry 6 } dot5PhysMgmtPortCommonSpeedFaultDetect OBJECT-TYPE SYNTAX INTEGER { notDetectable(1), noFaultDetected(2), faultDetected(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates whether a speed fault has been detected at this token ring port. If the HW is incapable of detecting a speed fault at the port, the value notDetectable is returned." ::= { dot5PhysMgmtPortCommonEntry 7 } dot5PhysMgmtPortCommonRingOutEnable OBJECT-TYPE SYNTAX INTEGER { notAvailable(1), disable(2), enable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object, when written, permits the port to function as either a ring out port or a station port, if available and if the MIM board on which this station port is resident lies within the domain of the device. If this selection is not supported by this port, or if the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. When read, this object will return the state of the port with respect to this mode of operation. The default state of this object, if available, is disabled; otherwise it is notAvailable." ::= { dot5PhysMgmtPortCommonEntry 8 } dot5PhysMgmtPortCommonPortAssociation OBJECT-TYPE SYNTAX INTEGER( 0..254 ) ACCESS read-write STATUS mandatory DESCRIPTION "This object, when written, would associate the port with the selected ring, provided this option is available for this port and and the MIM the port resides on lies within the domain of the managing device. If this option is not available, or should the MIM on which the port resides lie outside of the domain of the managing device, any write requests will result in the SNMP error BadValue being returned. When read, this object will return either a value indicating which ring the port is associated with or notAvailable if this function is not supported. If the MIM on which the port resides lies outside of the domain of the managing device, all read requests will return notAvailable. 0 - MIM does not support function 1..200 - Fnb ring 1 to Fnb ring 200 201..254 - AUX ring 1 to AUX ring 54" ::= { dot5PhysMgmtPortCommonEntry 9 } dot5PhysMgmtPortCommonMauCompId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object returns the component ID for the cptMau component for which this port is associated." ::= { dot5PhysMgmtPortCommonEntry 10 } -- -- ============================================================ -- -- Managed Objects in Support of Dot5 Physical Management for Token Ring Station Ports -- -- ============================================================ -- -- Implementation of this table is mandatory. -- -- If the MIM on which a port may reside falls outside of the -- domain of the managing device, then no managed objects will -- exist for the port. -- -- ============================================================ dot5PhysMgmtPortStnTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot5PhysMgmtPortStnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of managed objects which pertains to a collection of token ring station ports residing on a MIM board resident in a chassis with this device." ::= { dot5PhysMgmtPortStn 1 } dot5PhysMgmtPortStnEntry OBJECT-TYPE SYNTAX Dot5PhysMgmtPortStnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of managed objects which pertains to a single instance of a token ring station port residing on a MIM board resident in a chassis with this device." INDEX { dot5PhysMgmtPortStnBoardId, dot5PhysMgmtPortStnPortId } ::= { dot5PhysMgmtPortStnTable 1 } Dot5PhysMgmtPortStnEntry ::= SEQUENCE { dot5PhysMgmtPortStnPortId INTEGER, dot5PhysMgmtPortStnBoardId INTEGER, dot5PhysMgmtPortStnPortLinkState INTEGER, dot5PhysMgmtPortStnPortLinkStateTime TimeTicks, dot5PhysMgmtPortStnInsertionTrapEnable INTEGER } dot5PhysMgmtPortStnPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a token ring station port for which the information in this table pertains." ::= { dot5PhysMgmtPortStnEntry 1 } dot5PhysMgmtPortStnBoardId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a MIM board to which the token ring station port belongs for which the information in this table pertains." ::= { dot5PhysMgmtPortStnEntry 2 } dot5PhysMgmtPortStnPortLinkState OBJECT-TYPE SYNTAX INTEGER { noLink(1), link(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reports the link status of a token ring station port. The link status indicates the port is detecting a good phantom current." ::= { dot5PhysMgmtPortStnEntry 3 } dot5PhysMgmtPortStnPortLinkStateTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "This object reports the amount of time in TimeTicks since the token ring station port's link state last changed." ::= { dot5PhysMgmtPortStnEntry 4 } dot5PhysMgmtPortStnInsertionTrapEnable OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A write of enabled or disabled to this object permits or inhibits the sending of the port inserted and port deinserted traps when phantom current is asserted or removed, respectively, on this station port, provided the MIM on which this port is resident falls within the domain of the device. If the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. When read this object will repond with the last write request made. The default state of this object is disabled." ::= { dot5PhysMgmtPortStnEntry 5 } -- -- ============================================================ -- -- Managed Objects in Support of Dot5 Physical Management for Token Ring Ring Ports -- -- ============================================================ -- -- Implementation of this table is mandatory. -- -- If the MIM on which a port may reside falls outside of the -- domain of the managing device, then no managed objects will -- exist for the port. -- -- ============================================================ dot5PhysMgmtPortRingTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot5PhysMgmtPortRingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of managed objects which pertains to a collection of token ring ring ports residing on a MIM board resident in a chassis with this device." ::= { dot5PhysMgmtPortRing 1 } dot5PhysMgmtPortRingEntry OBJECT-TYPE SYNTAX Dot5PhysMgmtPortRingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of managed objects which pertains to a single instance of a token ring ring port residing on a MIM board resident in a chassis with this device." INDEX { dot5PhysMgmtPortRingBoardId, dot5PhysMgmtPortRingPortId} ::= { dot5PhysMgmtPortRingTable 1 } Dot5PhysMgmtPortRingEntry ::= SEQUENCE { dot5PhysMgmtPortRingPortId INTEGER, dot5PhysMgmtPortRingBoardId INTEGER, dot5PhysMgmtPortRingPortClass INTEGER, dot5PhysMgmtPortRingPortMediaSelect INTEGER, dot5PhysMgmtPortRingFaultStatus INTEGER, dot5PhysMgmtPortRingFaultStateTime TimeTicks, dot5PhysMgmtPortRingPhantomCurrent INTEGER, dot5PhysMgmtPortRingPortType INTEGER } dot5PhysMgmtPortRingPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a token ring ring port for which the information in this table pertains." ::= { dot5PhysMgmtPortRingEntry 1 } dot5PhysMgmtPortRingBoardId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a MIM board to which the token ring ring port belongs for which the information in this table pertains." ::= { dot5PhysMgmtPortRingEntry 2 } dot5PhysMgmtPortRingPortClass OBJECT-TYPE SYNTAX INTEGER { noAutowrap(1), autowrap(2), selectable(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object returns a code indicating whether the token ring ring port is capable of either autowrapping or not, or whether the media type is selectable (implies autowrappability)." ::= { dot5PhysMgmtPortRingEntry 3 } dot5PhysMgmtPortRingPortMediaSelect OBJECT-TYPE SYNTAX INTEGER { noSelection(1), stp(2), fiber(3) } ACCESS read-write STATUS mandatory DESCRIPTION "When written, this object allows for the selection of the media type for this token ring ring ring port, provided the MIM on which this port is resident falls within the domain of the device. If the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. If the ring port is not selectable and an attempt is made to change the media type, a BadValue error will be returned. When read, this object will return the last selection made unless it is unselectable, in which case noSelection is returned." ::= { dot5PhysMgmtPortRingEntry 4 } dot5PhysMgmtPortRingFaultStatus OBJECT-TYPE SYNTAX INTEGER { notSupported(1), noFaultDetected(2), faultDetected(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reports the media fault status of a token ring ring port capable of auto-wrapping. If auto-wrapping is not available, notSupported will be returned." ::= { dot5PhysMgmtPortRingEntry 5 } dot5PhysMgmtPortRingFaultStateTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "This object reports the amount of time in TimeTicks since the token ring ring port fault state last changed." ::= { dot5PhysMgmtPortRingEntry 6 } dot5PhysMgmtPortRingPhantomCurrent OBJECT-TYPE SYNTAX INTEGER { noPhantomAvailable(1), activatePhantom(2), deactivatePhantom(3) } ACCESS read-write STATUS mandatory DESCRIPTION "When written, this object activates or deactivates the MIM board's phantom current for this ring port, if applicable and provided the MIM on which this port is resident falls within the domain of the device. If the port does not support phantom drive, or if the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. If successfully written, this selection may be different than the HW switch setting. When read, this object reports the state of the ring port's phantom drive status, whether enabled, disabled, or not supported." ::= { dot5PhysMgmtPortRingEntry 7 } dot5PhysMgmtPortRingPortType OBJECT-TYPE SYNTAX INTEGER { ringIn(1), ringOut(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reports the ring port type." ::= { dot5PhysMgmtPortRingEntry 8 } -- -- ============================================================ -- -- Managed Objects in Support of Dot5 Physical Management for Token Ring Port Switching -- -- ============================================================ -- -- Implementation of this table is mandatory. -- -- If the MIM on which a port may reside falls outside of the -- domain of the managing device, then no managed objects will -- exist for the port. -- -- ============================================================ -- Currently there are no defined objects -- -- -- ============================================================ -- -- Managed Objects in Support of Dot5 Physical Management for Token Ring -- -- ============================================================ -- -- Implementation of this table is optional. -- -- If the MIM on which a port may reside falls outside of the -- domain of the managing device, then no managed objects will -- exist for the port. -- -- ============================================================ dot5PhysMgmtDeviceRingSpeedTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot5PhysMgmtDeviceRingSpeedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of managed objects which pertains to a collection of rings physically residing in the chassis in which a token ring device also resides." ::= { dot5PhysMgmtRingSpeedTables 1 } dot5PhysMgmtDeviceRingSpeedEntry OBJECT-TYPE SYNTAX Dot5PhysMgmtDeviceRingSpeedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of managed objects which pertains to a single instance of a ring physically residing in the chassis in which a token ring device also resides." INDEX { dot5PhysMgmtDeviceRingSpeedRing } ::= { dot5PhysMgmtDeviceRingSpeedTable 1 } Dot5PhysMgmtDeviceRingSpeedEntry ::= SEQUENCE { dot5PhysMgmtDeviceRingSpeedRing INTEGER, dot5PhysMgmtDeviceRingSpeed INTEGER } dot5PhysMgmtDeviceRingSpeedRing OBJECT-TYPE SYNTAX INTEGER (1..200) ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a FNB ring on a device board for which the information in this table pertains. Valid numeric range: 1 - 200 Fnb rings 1 - 200" ::= { dot5PhysMgmtDeviceRingSpeedEntry 1 } dot5PhysMgmtDeviceRingSpeed OBJECT-TYPE SYNTAX INTEGER { unknown(1), fourMegaBits(4), tenMegaBits(10), sixteenMegaBits(16), hundredMegaBits(100) } ACCESS read-write STATUS mandatory DESCRIPTION "This object sets the data speed of the ring. All MIM ports physically attached to the ring will be set to the indicated speed" ::= { dot5PhysMgmtDeviceRingSpeedEntry 2 } -- ============================================================ -- -- Implementation of this table is optional. -- -- If the MIM on which a port may reside falls outside of the -- domain of the managing device, then no managed objects will -- exist for the port. -- -- ============================================================ dot5PhysMgmtBoardAuxRingSpeedTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot5PhysMgmtBoardAuxRingSpeedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of managed objects which pertains to a collection of boards physically residing in the chassis in which a token ring device also resides." ::= { dot5PhysMgmtRingSpeedTables 2 } dot5PhysMgmtBoardAuxRingSpeedEntry OBJECT-TYPE SYNTAX Dot5PhysMgmtBoardAuxRingSpeedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of managed objects which pertains to a single instance of a board physically residing in the chassis in which a token ring device also resides." INDEX { dot5PhysMgmtBoardAuxRingSpeedBoardId, dot5PhysMgmtBoardAuxRingSpeedAuxRing } ::= { dot5PhysMgmtBoardAuxRingSpeedTable 1 } Dot5PhysMgmtBoardAuxRingSpeedEntry ::= SEQUENCE { dot5PhysMgmtBoardAuxRingSpeedBoardId INTEGER, dot5PhysMgmtBoardAuxRingSpeedAuxRing INTEGER, dot5PhysMgmtBoardAuxRingSpeed INTEGER } dot5PhysMgmtBoardAuxRingSpeedBoardId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a MIM board for which the information in this table pertains." ::= { dot5PhysMgmtBoardAuxRingSpeedEntry 1 } dot5PhysMgmtBoardAuxRingSpeedAuxRing OBJECT-TYPE SYNTAX INTEGER (201..254) ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to an auxillary ring on a MIM board for which the information in this table pertains. Valid numeric range: 201 - 254 Auxillary rings 1 - 54" ::= { dot5PhysMgmtBoardAuxRingSpeedEntry 2 } dot5PhysMgmtBoardAuxRingSpeed OBJECT-TYPE SYNTAX INTEGER { unknown(1), fourMegaBits(4), tenMegaBits(10), sixteenMegaBits(16), hundredMegaBits(100) } ACCESS read-write STATUS mandatory DESCRIPTION "This object sets the data speed of the auxillary ring. On devices without an auxillary ring, or on MIMs which reside outside of the domain of the managing device, this object does not exist." ::= { dot5PhysMgmtBoardAuxRingSpeedEntry 3 } -- -- Revision History -- -- Rev 0.00.01 -- Date: October 23, 1993 -- -- Initial working document. -- -- Rev 0.00.02 -- Date: October 27, 1993 -- -- a) Changed branch where MIB lives in enterprise MIB to -- ctDot5PhysMgmt OBJECT IDENTIFIER ::= { ctPhysical 6 } -- dot5PhysMgmtRev1 OBJECT IDENTIFIER ::= { ctDot5PhysMgmt 1 } -- -- b) Modified PortCount objects such that total port counts and ring port -- counts do not include the count of empty TPIM slots. -- -- Rev 0.00.03 -- Date: October 29, 1993 -- -- Added descriptive text which explains what a "token ring device" is -- within the context of this MIB, and how such a device is expected to -- respond to read and write requests destined for MIMs and ports which -- lie outside of the domain of the token ring device. Also, the des- -- criptive text accompanying many of the managed objects defined in this -- MIB has been refined to more accurately what is being managed and what -- should be expected as a response from the object when acted upon. -- -- Rev 0.00.04 -- Date: November 8, 1993 -- -- Added object dot5PhysMgmtBoardDomain at { dot5PhysMgmtBoardEntry 2 }. -- This bumped down all following board objects by one. -- -- Rev 0.00.05 -- Date: January 26, 1994 -- -- a) This MIB now defines the appropriate response for several of the -- managed objects depending on whether the board or port lies within -- the domain of the managing device or not. -- b) The Device managed objects which have been descriptively modified: -- dot5PhysMgmtDevicePortCount { dot5PhysMgmtDevice 2 } -- dot5PhysMgmtDevicePortsOn { dot5PhysMgmtDevice 4 } -- dot5PhysMgmtDevicePortsOper { dot5PhysMgmtDevice 5 } -- dot5PhysMgmtDeviceStnPortCount { dot5PhysMgmtDevice 6 } -- dot5PhysMgmtDeviceStnPortsOn { dot5PhysMgmtDevice 8 } -- dot5PhysMgmtDeviceRingPortCount { dot5PhysMgmtDevice 9 } -- dot5PhysMgmtDeviceRingPortsOn { dot5PhysMgmtDevice 11 } -- c) The Board managed objects which have been descriptively modified: -- dot5PhysMgmtBoardDot5PortCount { dot5PhysMgmtBoardEntry 5} -- dot5PhysMgmtBoardDot5PortsOn { dot5PhysMgmtBoardEntry 7} -- dot5PhysMgmtBoardDot5PortsOper { dot5PhysMgmtBoardEntry 8} -- dot5PhysMgmtBoardDot5StnPortCount { dot5PhysMgmtBoardEntry 9} -- dot5PhysMgmtBoardDot5StnPortsOn { dot5PhysMgmtBoardEntry 11} -- dot5PhysMgmtBoardDot5RingPortCount { dot5PhysMgmtBoardEntry 12} -- dot5PhysMgmtBoardDot5RingPortsOn { dot5PhysMgmtBoardEntry 14} -- d) The Common, Station and Ring Port groups descriptive text has been -- modified to reflect that should a MIM on which a port may reside -- falls outside of the domain of the managing device, then no managed -- objects will exist for the port. -- e) The syntax of the object dot5PhysMgmtBoardSpeed has been modified to -- return the value 1 if the speed of the board is indeterminate. -- -- Rev 0.00.06 -- Date: March 29, 1994 -- -- a) Added MIB Objects: -- dot5PhysMgmtDevicePortAssociationChanges { dot5PhysMgmtDevice 12 }. -- dot5PhysMgmtBoardPortAssociation { dot5PhysMgmtBoardEntry 19 }. -- dot5PhysMgmtBoardPortAssociationChanges { dot5PhysMgmtBoardEntry 20 }. -- dot5PhysMgmtPortCommonPortAssociation { dot5PhysMgmtPortCommonEntry 9 }. -- dot5PhysMgmtPortCommonMauCompId { dot5PhysMgmtPortCommonEntry 10 }. -- -- Rev 1.00.01 -- Date: July 8, 1994 -- -- a) Added MIB Object dot5PhysMgmtPortRingPortType. -- -- Rev 1.00.02 -- Date: July 20, 1994 -- -- a) Added MIB Objects dot5PhysMgmtDeviceRingSpeedTable and -- dot5PhysMgmtBoardAuxRingSpeedTable. -- END