| dot5PhysMgmtDeviceRingCount |
.1.3.6.1.4.1.52.4.1.1.6.1.1.1 |
|
Returns the total number of rings passing through the chassis
of which the token ring device is aware. All of these rings
may or may not be administratively or statistically manageable.
|
| dot5PhysMgmtDevicePortCount |
.1.3.6.1.4.1.52.4.1.1.6.1.1.2 |
|
Returns the total number of token ring ports contained within
the chassis in which the managing device resides. This count
does not include unpopulated TPIM slots, nor does it include
ports residing on MIM boards outside of the domain of the
managing device.
|
| dot5PhysMgmtDevicePortsEnable |
.1.3.6.1.4.1.52.4.1.1.6.1.1.3 |
|
Setting this object to enable will cause all the token ring
ports residing within the domain of this device to be enabled.
Setting this object to noEnable will have no effect. When
read this object will always return noEnable.
|
| dot5PhysMgmtDevicePortsOn |
.1.3.6.1.4.1.52.4.1.1.6.1.1.4 |
|
Returns the total number of administratively enabled token ring
ports contained within the chassis in which the managing device
resides. This count does not include ports residing on MIM
boards outside of the domain of the managing device.
|
| dot5PhysMgmtDevicePortsOper |
.1.3.6.1.4.1.52.4.1.1.6.1.1.5 |
|
Returns the total number of operational token ring ports
contained within the chassis in which the managing device
resides. This count does not include ports residing on MIM
boards outside of the domain of the managing device.
|
| dot5PhysMgmtDeviceStnPortCount |
.1.3.6.1.4.1.52.4.1.1.6.1.1.6 |
|
Returns the total number of token ring station ports contained
within the chassis in which the managing device resides. This
count does not include ports residing on MIM boards outside of
the domain of the managing device.
|
| dot5PhysMgmtDeviceStnPortsEnable |
.1.3.6.1.4.1.52.4.1.1.6.1.1.7 |
|
Setting this object to enable will cause all the token
ring station ports residing within the domain of this
device to be enabled. Setting this object to noEnable
will have no effect. When read this object will always
return noEnable.
|
| dot5PhysMgmtDeviceStnPortsOn |
.1.3.6.1.4.1.52.4.1.1.6.1.1.8 |
|
Returns the total number of administratively enabled token
ring station ports contained within the chassis in which
the managing device resides. This count does not include
ports residing on MIM boards outside of the domain of the
managing device.
|
| dot5PhysMgmtDeviceRingPortCount |
.1.3.6.1.4.1.52.4.1.1.6.1.1.9 |
|
Returns the total number of token ring ring in/ring out
ports contained within the chassis in which the managing
device resides. This count does not include unpopulated
TPIM slots nor does it include ports residing on MIM boards
outside of the domain of the managing device.
|
| dot5PhysMgmtDeviceRingPortsEnable |
.1.3.6.1.4.1.52.4.1.1.6.1.1.10 |
|
Setting this object to enable will cause all the token
ring ring in/ring out ports residing within the domain
of this device to be enabled. Setting this object to
noEnable will have no effect. When read this object will
always return noEnable.
|
| dot5PhysMgmtDeviceRingPortsOn |
.1.3.6.1.4.1.52.4.1.1.6.1.1.11 |
|
Returns the total number of administratively enabled token
ring ring in/ring out ports contained within the chassis
in which this device resides. This count does not include
ports residing on MIM boards outside of the domain of the
managing device.
|
| dot5PhysMgmtDevicePortAssociationChanges |
.1.3.6.1.4.1.52.4.1.1.6.1.1.12 |
|
This object is incremented every time the port association changes
for a token ring port residing on a MIM board contained within the
chassis in which the managing device resides. This count does not
include port association changes for ports residing on MIM boards
outside of the domain of the managing device.
|
| dot5PhysMgmtBoardEntry |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1 |
|
A list of managed objects which pertains to a single instance
of a board physically residing in the chassis in which a token
ring device also resides.
|
| dot5PhysMgmtPortCommonEntry |
.1.3.6.1.4.1.52.4.1.1.6.1.3.1.1.1 |
|
A list of managed objects which pertains to a single instance of a
token ring port physically residing on a MIM board resident in a
chassis with this device.
|
| dot5PhysMgmtPortStnEntry |
.1.3.6.1.4.1.52.4.1.1.6.1.3.2.1.1 |
|
A list of managed objects which pertains to a single instance
of a token ring station port residing on a MIM board resident
in a chassis with this device.
|
| dot5PhysMgmtPortRingEntry |
.1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1 |
|
A list of managed objects which pertains to a single instance
of a token ring ring port residing on a MIM board resident in
a chassis with this device.
|
| dot5PhysMgmtDeviceRingSpeedEntry |
.1.3.6.1.4.1.52.4.1.1.6.1.4.1.1 |
|
A list of managed objects which pertains to a single instance of a
ring physically residing in the chassis in which a token ring device
also resides.
|
| dot5PhysMgmtBoardAuxRingSpeedEntry |
.1.3.6.1.4.1.52.4.1.1.6.1.4.2.1 |
|
A list of managed objects which pertains to a single instance of a
board physically residing in the chassis in which a token ring device
also resides.
|
| dot5PhysMgmtBoardId |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.1 |
|
Returns an index to a MIM board for which the information
in this table pertains.
|
| dot5PhysMgmtBoardDomain |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.2 |
|
Returns an indication of the manageability of this MIM by
the device being addressed. If the value outsideDomain is
returned, then any write requests to this MIM will result
in an SNMP error BadValue being returned. If the value
withinDomain is returned, then the MIM may be managed via
write requests.
|
| dot5PhysMgmtBoardName |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.3 |
|
The ASCII name assigned to this MIM board. This name defaults
to 'Board n', where n is a unique integer value from 1 to n
which corelates to the physical chassis slot the board resides
in.
|
| dot5PhysMgmtBoardDesc |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.4 |
|
An ASCII string which describes this type of MIM board. For
example, an MT8MIM would be described as 'MT8MIM' and a TRRMIM-2A
would be described as 'TRR2A', etc.
|
| dot5PhysMgmtBoardDot5PortCount |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.5 |
|
Returns the total number of token ring ports contained on the
board. This count does not include unpopulated TPIM slots.
If this MIM falls outside of the domain of the managing device,
then this count will be zero.
|
| dot5PhysMgmtBoardDot5PortsEnable |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.6 |
|
Setting this object to enable will cause all the token ring
ports residing on this MIM board to be enabled, provided this
MIM falls within the domain of the device. If the MIM falls
outside of the domain of the device, the SNMP error BadValue
will be returned. Setting this object to noEnable will have
no effect. When read this object will always return noEnable.
|
| dot5PhysMgmtBoardDot5PortsOn |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.7 |
|
Returns the total number of administratively enabled token
ring ports residing on this MIM board. If this MIM falls
outside of the domain of the managing device, then this
count will be zero.
|
| dot5PhysMgmtBoardDot5PortsOper |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.8 |
|
Returns the total number of operational token ring ports
residing on this MIM board. If this MIM falls outside of
the domain of the managing device, then this count will be
zero.
|
| dot5PhysMgmtBoardDot5StnPortCount |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.9 |
|
Returns the total number of token ring station ports contained
on the board. If this MIM falls outside of the domain of the
managing device, then this count will be zero.
|
| dot5PhysMgmtBoardDot5StnPortsEnable |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.10 |
|
Setting this object to enable will cause all the token ring
station ports residing on this MIM board to be enabled, provided
this MIM falls within the domain of the device. If the MIM falls
outside of the domain of the device, the SNMP error BadValue will
be returned. Setting this object to noEnable will have no effect.
When read this object will always return noEnable.
|
| dot5PhysMgmtBoardDot5StnPortsOn |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.11 |
|
Returns the total number of adminstratively enabled token
ring station ports residing on this MIM board. If this MIM
falls outside of the domain of the managing device, then
this count will be zero.
|
| dot5PhysMgmtBoardDot5RingPortCount |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.12 |
|
Returns the total number of token ring ring in/ring out
ports contained on the board. This count does not include
unpopulated TPIM slots. If this MIM falls outside of the
domain of the managing device, then this count will be zero.
|
| dot5PhysMgmtBoardDot5RingPortsEnable |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.13 |
|
Setting this object to enable will cause all the token ring
ring in/ring out ports residing on this MIM board to be enabled,
provided this MIM falls within the domain of the device. If
the MIM falls outside of the domain of the device, the SNMP
error BadValue will be returned. Setting this object to noEnable
will have no effect. When read this object will always return
noEnable.
|
| dot5PhysMgmtBoardDot5RingPortsOn |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.14 |
|
Returns the total number of adminstratively enabled token
ring ring in/ring out ports residing on this MIM board.
If this MIM falls outside of the domain of the managing
device, then this count will be zero.
|
| dot5PhysMgmtBoardMode |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.15 |
|
This object defines the mode of the board. In Auto Mode, the
board is using its hardware defaults. The default values of the
board are all ports enabled, speed selected by the HW jumper on
the board, the FNB attempts to attach left and right and not
bypassed, ring port phantom current (if applicable) is controlled
via a HW switch, and selectable media (if applicable) is managed
also via a HW switch. In Management Mode, the hardware defaults
may be overridden by network or local management. If the mode
of the board is indeterminate, such as an Ethernet MIM, then the
value unknown is returned. A write to this object will place the
board into either management or auto mode, provided this MIM falls
within the domain of the device. If the MIM falls outside of the
domain of the device, the SNMP error BadValue will be returned. A
write request with the value unknown also returns the SNMP error
BadValue.
|
| dot5PhysMgmtBoardSpeed |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.16 |
|
This object sets the data speed of the board. On devices with
a MAC interface, on MIM boards in which the data speed cannot
be set, or on MIMs which reside outside of the domain of the
managing device, this object is read-only, and will return the
SNMP error BadValue on a write request.
|
| dot5PhysMgmtBoardSpeedFault |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.17 |
|
This object reports a ring speed fault on a MIM board, if applicable.
If the MIM cannot detect speed faults, such as an Ethernet MIM, then
the value notSupported is returned..
|
| dot5PhysMgmtBoardSpeedFaultLocation |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.18 |
|
This object indicates the last ring speed fault detection circuit(s)
to detect the fault, if there was one. On MIM boards which cannot
detect speed faults, such as an Ethernet MIM, the value notApplicable
is returned.
|
| dot5PhysMgmtBoardPortAssociation |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.19 |
|
This object, when written, would associate all of the ports on the
board with the selected ring, provided this option is available for
this MIM and this MIM lies within the domain of the managing device.
If this option is not available, or should the MIM lie outside of the
domain of the managing device, any write requests will result in the
SNMP error BadValue being returned. When read, this object will return
either a value indicating which ring all the ports on the board are
associated with or notAvailable if this function is not supported. If
the MIM lies outside of the domain of the managing device, all read
requests will return notAvailable.
0 - MIM does not support function
1..200 - Fnb ring 1 to Fnb ring 200
201..254 - AUX ring 1 to AUX ring 54
255 - All ports are not on the same ring
|
| dot5PhysMgmtBoardPortAssociationChanges |
.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.20 |
|
This object is incremented every time the port association changes
for a token ring port residing on this MIM board. If this MIM falls
outside of the domain of the managing device, then this count will
remain zero.
|
| dot5PhysMgmtPortCommonBoardId |
.1.3.6.1.4.1.52.4.1.1.6.1.3.1.1.1.2 |
|
Returns an index to a MIM board to which the token ring port
belongs for which the information in this table pertains.
|
| dot5PhysMgmtPortCommonPortId |
.1.3.6.1.4.1.52.4.1.1.6.1.3.1.1.1.1 |
|
Returns an index to a token ring port for which the information
in this table pertains.
|
| dot5PhysMgmtPortCommonPortName |
.1.3.6.1.4.1.52.4.1.1.6.1.3.1.1.1.3 |
|
Sets an ASCII name for this token ring port, provided the MIM
on which this port is resident falls within the domain of the
device. If the MIM falls outside of the domain of the device,
the SNMP error BadValue will be returned. The default name
for this object is 'Board b, Port p', where b and p are unique
integers 1 through n. When read, this object will return the
ASCII name which is assigned to this port.
|
| dot5PhysMgmtPortCommonPortAdminState |
.1.3.6.1.4.1.52.4.1.1.6.1.3.1.1.1.4 |
|
Setting this object to enable or disable will cause this token
ring port to be enabled or disabled, respectively, provided the
MIM on which this port is resident falls within the domain of the
device. If the MIM falls outside of the domain of the device, the
SNMP error BadValue will be returned. When read this object will
always return the last administrative request made.
|
| dot5PhysMgmtPortCommonPortOperState |
.1.3.6.1.4.1.52.4.1.1.6.1.3.1.1.1.5 |
|
Returns the operational state of this token ring port.
|
| dot5PhysMgmtPortCommonPortType |
.1.3.6.1.4.1.52.4.1.1.6.1.3.1.1.1.6 |
|
Uniquely defines the token ring station or ring port type. An
authoritative identification for a token ring station or ring
port type. By convention, this value is allocated within the
SMI enterprises subtree (1.3.6.1.4.1), and provides an easy and
unambiguous means to determine the type of a token ring station
or ring port.
|
| dot5PhysMgmtPortCommonSpeedFaultDetect |
.1.3.6.1.4.1.52.4.1.1.6.1.3.1.1.1.7 |
|
This object indicates whether a speed fault has been detected at
this token ring port. If the HW is incapable of detecting a speed
fault at the port, the value notDetectable is returned.
|
| dot5PhysMgmtPortCommonRingOutEnable |
.1.3.6.1.4.1.52.4.1.1.6.1.3.1.1.1.8 |
|
This object, when written, permits the port to function as either
a ring out port or a station port, if available and if the MIM
board on which this station port is resident lies within the domain
of the device. If this selection is not supported by this port, or
if the MIM falls outside of the domain of the device, the SNMP error
BadValue will be returned. When read, this object will return the
state of the port with respect to this mode of operation. The default
state of this object, if available, is disabled; otherwise it is
notAvailable.
|
| dot5PhysMgmtPortCommonPortAssociation |
.1.3.6.1.4.1.52.4.1.1.6.1.3.1.1.1.9 |
|
This object, when written, would associate the port with the
selected ring, provided this option is available for this port and
and the MIM the port resides on lies within the domain of the
managing device. If this option is not available, or should the
MIM on which the port resides lie outside of the domain of the
managing device, any write requests will result in the SNMP error
BadValue being returned. When read, this object will return either
a value indicating which ring the port is associated with or
notAvailable if this function is not supported. If the MIM on
which the port resides lies outside of the domain of the managing
device, all read requests will return notAvailable.
0 - MIM does not support function
1..200 - Fnb ring 1 to Fnb ring 200
201..254 - AUX ring 1 to AUX ring 54
|
| dot5PhysMgmtPortCommonMauCompId |
.1.3.6.1.4.1.52.4.1.1.6.1.3.1.1.1.10 |
|
This object returns the component ID for the cptMau component
for which this port is associated.
|
| dot5PhysMgmtPortStnBoardId |
.1.3.6.1.4.1.52.4.1.1.6.1.3.2.1.1.2 |
|
Returns an index to a MIM board to which the token ring station
port belongs for which the information in this table pertains.
|
| dot5PhysMgmtPortStnPortId |
.1.3.6.1.4.1.52.4.1.1.6.1.3.2.1.1.1 |
|
Returns an index to a token ring station port for which the
information in this table pertains.
|
| dot5PhysMgmtPortStnPortLinkState |
.1.3.6.1.4.1.52.4.1.1.6.1.3.2.1.1.3 |
|
This object reports the link status of a token ring station port.
The link status indicates the port is detecting a good phantom current.
|
| dot5PhysMgmtPortStnPortLinkStateTime |
.1.3.6.1.4.1.52.4.1.1.6.1.3.2.1.1.4 |
|
This object reports the amount of time in TimeTicks since the token
ring station port's link state last changed.
|
| dot5PhysMgmtPortStnInsertionTrapEnable |
.1.3.6.1.4.1.52.4.1.1.6.1.3.2.1.1.5 |
|
A write of enabled or disabled to this object permits or inhibits
the sending of the port inserted and port deinserted traps when
phantom current is asserted or removed, respectively, on this
station port, provided the MIM on which this port is resident falls
within the domain of the device. If the MIM falls outside of the
domain of the device, the SNMP error BadValue will be returned. When
read this object will repond with the last write request made. The
default state of this object is disabled.
|
| dot5PhysMgmtPortRingBoardId |
.1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.2 |
|
Returns an index to a MIM board to which the token ring ring
port belongs for which the information in this table pertains.
|
| dot5PhysMgmtPortRingPortId |
.1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.1 |
|
Returns an index to a token ring ring port for which the
information in this table pertains.
|
| dot5PhysMgmtPortRingPortClass |
.1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.3 |
|
This object returns a code indicating whether the token ring ring
port is capable of either autowrapping or not, or whether the media
type is selectable (implies autowrappability).
|
| dot5PhysMgmtPortRingPortMediaSelect |
.1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.4 |
|
When written, this object allows for the selection of the media type
for this token ring ring ring port, provided the MIM on which this
port is resident falls within the domain of the device. If the MIM
falls outside of the domain of the device, the SNMP error BadValue
will be returned. If the ring port is not selectable and an attempt
is made to change the media type, a BadValue error will be returned.
When read, this object will return the last selection made unless it
is unselectable, in which case noSelection is returned.
|
| dot5PhysMgmtPortRingFaultStatus |
.1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.5 |
|
This object reports the media fault status of a token ring ring port
capable of auto-wrapping. If auto-wrapping is not available, notSupported
will be returned.
|
| dot5PhysMgmtPortRingFaultStateTime |
.1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.6 |
|
This object reports the amount of time in TimeTicks since the token
ring ring port fault state last changed.
|
| dot5PhysMgmtPortRingPhantomCurrent |
.1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.7 |
|
When written, this object activates or deactivates the MIM board's
phantom current for this ring port, if applicable and provided the
MIM on which this port is resident falls within the domain of the
device. If the port does not support phantom drive, or if the MIM
falls outside of the domain of the device, the SNMP error BadValue
will be returned. If successfully written, this selection may be
different than the HW switch setting. When read, this object reports
the state of the ring port's phantom drive status, whether enabled,
disabled, or not supported.
|
| dot5PhysMgmtPortRingPortType |
.1.3.6.1.4.1.52.4.1.1.6.1.3.3.1.1.8 |
|
This object reports the ring port type.
|
| dot5PhysMgmtDeviceRingSpeedRing |
.1.3.6.1.4.1.52.4.1.1.6.1.4.1.1.1 |
|
Returns an index to a FNB ring on a device board for which the
information in this table pertains.
Valid numeric range:
1 - 200 Fnb rings 1 - 200
|
| dot5PhysMgmtDeviceRingSpeed |
.1.3.6.1.4.1.52.4.1.1.6.1.4.1.1.2 |
|
This object sets the data speed of the ring. All MIM ports
physically attached to the ring will be set to the indicated
speed
|
| dot5PhysMgmtBoardAuxRingSpeedBoardId |
.1.3.6.1.4.1.52.4.1.1.6.1.4.2.1.1 |
|
Returns an index to a MIM board for which the information in this
table pertains.
|
| dot5PhysMgmtBoardAuxRingSpeedAuxRing |
.1.3.6.1.4.1.52.4.1.1.6.1.4.2.1.2 |
|
Returns an index to an auxillary ring on a MIM board for which
the information in this table pertains.
Valid numeric range:
201 - 254 Auxillary rings 1 - 54
|
| dot5PhysMgmtBoardAuxRingSpeed |
.1.3.6.1.4.1.52.4.1.1.6.1.4.2.1.3 |
|
This object sets the data speed of the auxillary ring. On devices
without an auxillary ring, or on MIMs which reside outside of the
domain of the managing device, this object does not exist.
|
