| rptrMgmtName |
.1.3.6.1.4.1.52.4.1.1.1.4.1.1.1 |
|
The ASCII name assigned to this network.
|
| rptrMgmtPortCount |
.1.3.6.1.4.1.52.4.1.1.1.4.1.1.2 |
|
Total number of ports residing on this lan segment.
|
| rptrMgmtPortsEnable |
.1.3.6.1.4.1.52.4.1.1.1.4.1.1.3 |
|
Setting this object to Enable will cause all the ports
residing in this network segment to be enabled. Setting
this object to noEnable will have no effect. When read
this object will always return noEnable.
|
| rptrMgmtPortsOn |
.1.3.6.1.4.1.52.4.1.1.1.4.1.1.4 |
|
Get the total number of ON ports in this network.
|
| rptrMgmtPortsOper |
.1.3.6.1.4.1.52.4.1.1.1.4.1.1.5 |
|
Get the number of operational ports in this network.
|
| rptrMgmtBoardMap |
.1.3.6.1.4.1.52.4.1.1.1.4.1.1.6 |
|
Get a map of the chassis slots occupied by the boards in
this network.
|
| rptrMgmtInterfaceNum |
.1.3.6.1.4.1.52.4.1.1.1.4.1.1.7 |
|
Get the MIBII interface number of this network. A return of zero will
mean this network is not associated with a MIBII interface.
|
| rptrMgmtResetCounters |
.1.3.6.1.4.1.52.4.1.1.1.4.1.1.8 |
|
Setting this OID to 2 will reset the 'rptrPktStats', 'rptrProtocols'
and 'rptrFrameSizes' RREV-4 branch static counters. Reading this OID
will always return a 1.
|
| rptrPktStatsPackets |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.1 |
|
Get this repeater's total received packets.
|
| rptrPktStatsBytes |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.2 |
|
Get this repeater's total received bytes.
|
| rptrPktStatsColls |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.3 |
|
Get this repeater's total collisions.
|
| rptrPktStatsErrors |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.4 |
|
Get this repeater's total errors.
|
| rptrPktStatsAlign |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.5 |
|
Get this repeater's total frame alignment errors.
|
| rptrPktStatsCRC |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.6 |
|
Get this repeater's total CRC errors.
|
| rptrPktStatsOOW |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.7 |
|
Get this repeater's total out-of-window collisions.
|
| rptrPktStatsNoRsc |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.8 |
|
This counter is the number of packets on this network that the
hardware has processed that the management has either not seen yet,
in the case of an active network, or has missed missed all
together, in the case of a once active network.
|
| rptrPktStatsBroadcasts |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.9 |
|
This counter is the number of broadcast packets on this network
that the hardware has processed.
|
| rptrPktStatsMulticasts |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.10 |
|
This counter is the number of multicast packets on this network
that the hardware has processed.
|
| rptrProtocolsOSI |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.1 |
|
Get this repeater's total received OSI packets.
|
| rptrProtocolsNovell |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.2 |
|
Get this repeater's total received Novell packets.
|
| rptrProtocolsBanyan |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.3 |
|
Get this repeater's total received Banyan packets.
|
| rptrProtocolsDECNet |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.4 |
|
Get this repeater's total received DECNet packets.
|
| rptrProtocolsXNS |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.5 |
|
Get this repeater's total received XNS packets.
|
| rptrProtocolsIP |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.6 |
|
Get this repeater's total received TCP/IP packets.
|
| rptrProtocolsCtron |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.7 |
|
Get this repeater's total received CTRON Management packets.
|
| rptrProtocolsAppletalk |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.8 |
|
Get this repeater's total received Appletalk packets.
|
| rptrProtocolsOther |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.9 |
|
Get this repeater's total received unknown protocol packets.
|
| rptrFrameSzRunt |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.1 |
|
Get this repeater's total received packets of size less than
64 bytes.
|
| rptrFrameSz64To127 |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.2 |
|
Get this repeater's total received packets of size between
64 and 127 bytes.
|
| rptrFrameSz128To255 |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.3 |
|
Get this repeater's total received packets of size between
128 and 255 bytes.
|
| rptrFrameSz256To511 |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.4 |
|
Get this repeater's total received packets of size between
256 and 511 bytes.
|
| rptrFrameSz512To1023 |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.5 |
|
Get this repeater's total received packets of size between
512 and 1023 bytes.
|
| rptrFrameSz1024To1518 |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.6 |
|
Get this repeater's total received packets of size between
1024 and 1518 bytes.
|
| rptrFrameSzGiant |
.1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.7 |
|
Get this repeater's total received packets of size greater
than 1518 bytes.
|
| rptrAlarmsTrafEnable |
.1.3.6.1.4.1.52.4.1.1.1.4.1.3.1 |
|
Get returns whether traffic alarms are enabled/disabled.
Set allows for enabling/disabling of traffic alarms.
|
| rptrAlarmsTrafThreshold |
.1.3.6.1.4.1.52.4.1.1.1.4.1.3.2 |
|
The maximum number of packets that will be allowed before
an alarm is generated.
|
| rptrAlarmsCollEnable |
.1.3.6.1.4.1.52.4.1.1.1.4.1.3.3 |
|
Get returns whether collision alarms are enabled/disabled.
Set allows for enabling/disabling of collision alarms.
|
| rptrAlarmsCollThreshold |
.1.3.6.1.4.1.52.4.1.1.1.4.1.3.4 |
|
The collision threshold is the maximum number of collisions
within the time base that will be allowed before an alarm
is generated.
|
| rptrAlarmsErrEnable |
.1.3.6.1.4.1.52.4.1.1.1.4.1.3.5 |
|
Get returns whether error alarms are enabled/disabled.
Set allows for enabling/disabling of error alarms.
|
| rptrAlarmsErrThreshold |
.1.3.6.1.4.1.52.4.1.1.1.4.1.3.6 |
|
The percentage of errors per good packet within
the timebase that will cause an alarm. The units of this value
is in seconds.
|
| rptrAlarmsErrSource |
.1.3.6.1.4.1.52.4.1.1.1.4.1.3.7 |
|
Get/Set a bit encoded map of which errors to include in the
error sum, as follows:
CRC_errors - Bit 0 - Least Significant Bit
runts - Bit 1
OOW_colls - Bit 2
align_errs - Bit 3
undefined - Bit 4
Giants - Bit 5
|
| rptrAlarmsAlarmTimebase |
.1.3.6.1.4.1.52.4.1.1.1.4.1.3.8 |
|
The alarm timebase, in seconds.
|
| rptrAlarmsBroadEnable |
.1.3.6.1.4.1.52.4.1.1.1.4.1.3.9 |
|
Get returns whether broadcast alarms are enabled/disabled.
Set allows for enabling/disabling of broadcast alarms.
|
| rptrAlarmsBroadThreshold |
.1.3.6.1.4.1.52.4.1.1.1.4.1.3.10 |
|
The broadcase threshold represents the maximum number of
broadcasts that are allowed during the time base before an
alarm is generated.
|
| rptrRedundReset |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.1 |
|
If this object is set to Reset it will cause a reset
of the redundancy object to occur. Setting this
object to NoReset will do nothing. This object will always
be read as NoReset.
|
| rptrRedundPollInterval |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.2 |
|
Get/Set the number of seconds between polls for redundancy.
|
| rptrRedundTestTOD |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.3 |
|
Get/Set the time of day at which the redundant circuits will
be tested. The format of the time string is hh:mm:ss.
|
| rptrRedundPerformTest |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.4 |
|
If this object is set to Test it will cause a test of the
redundant circuits to be performed. Setting this object to
NoTest will have no effect. When read this object will always
return NoTest.
|
| rptrRedundMaxCrcts |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.5 |
|
Returns the maximum number of circuits which may exist on this
network.
|
| rptrRedundCrctEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1 |
|
A list of objects for a particular redundant circuit.
|
| rptrRedundPortEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1 |
|
A redundant port entry containing objects pertaining to
a particular redundant port.
|
| rptrRedundAddrEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1 |
|
A entry containing objects pertaining to a particular redundant
IP Address which belongs to a circuit.
|
| rptrSrcAddrListEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1 |
|
Defines a specific source address object.
|
| rptrSrcAddrSrcTableEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1 |
|
Describes a particular source address source entry.
|
| rptrSrcAddrMgmtSrcAgeInterval |
.1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.1 |
|
Get/Set source addressing ageing interval.
|
| rptrSrcAddrMgmtPortLock |
.1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.2 |
|
Setting this object to Lock will activate the network port
security lock.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.
|
| rptrSrcAddrMgmtActiveUsers |
.1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.3 |
|
Get the number of active users on this network.
|
| rptrSrcAddrMgmtHashType |
.1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.4 |
|
Defines the type of hashing that will be used for source address
management. In a DEC-NET environment or a combination fo DEC-NET
and non DEC-NET users where source address hash access is a concern
a value of decHash(2) may yield better results. For non DEC-NET
users a value of noDecHash(1) is preferred.
|
| rptrHwTrapSetLink |
.1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.1 |
|
Enables and disables link traps for this network. Setting a value
of disable(1) is equivalent to setting all instances of
rptrPortHwTrapSetLink to a value of disable(1). Setting a value of
enable(2) is equivalent to setting all instances of
rptrPortHwTrapSetLink to a value of disable(2). Setting a value of
other(3) is not allowed.
This object will read with the value of disable(1) if all instances
of rptrPortHwTrapSetLink for this network are currently set
to a value of disable(1).
This object will read with the value of enable(2) if all instances
of rptrPortHwTrapSetLink for this network are currently set
to a value of enable(2).
This object will read with the value of other(3) if all instances
of rptrPortHwTrapSetLink for this network are not currently
set to a value the same value.
|
| rptrHwTrapSetSeg |
.1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.2 |
|
Enables and disables segmentation traps for this network. Setting a
value of disable(1) is equivalent to setting all instances of
rptrPortHwTrapSetSeg to a value of disable(1). Setting a value of
enable(2) is equivalent to setting all instances of
rptrPortHwTrapSetSeg to a value of disable(2). Setting a value of
other(3) is not allowed.
This object will read with the value of disable(1) if all instances
of rptrPortHwTrapSetSeg for this network are currently set
to a value of disable(1).
This object will read with the value of enable(2) if all instances
of rptrPortHwTrapSetSeg for this network are currently set
to a value of enable(2).
This object will read with the value of other(3) if all instances
of rptrPortHwTrapSetSeg for this network are not currently
set to a value the same value.
|
| rptrSaTrapSetSrcaddr |
.1.3.6.1.4.1.52.4.1.1.1.4.1.6.2.1 |
|
Enables and disables source address traps for this network. Setting
a value of disable(1) is equivalent to setting all instances of
rptrPortSaTrapSetSrcaddr to a value of disable(1). Setting a value of
enable(2) is equivalent to setting all instances of
rptrPortSaTrapSetSrcaddr to a value of disable(2). Setting a value of
other(3) is not allowed.
This object will read with the value of disable(1) if all instances
of rptrPortSaTrapSetSrcaddr for this network are currently set
to a value of disable(1).
This object will read with the value of enable(2) if all instances
of rptrPortSaTrapSetSrcaddr for this network are currently set
to a value of enable(2).
This object will read with the value of other(3) if all instances
of rptrPortSaTrapSetSrcaddr for this network are not currently
set to a value the same value.
|
| rptrSecurityLockState |
.1.3.6.1.4.1.52.4.1.1.1.4.1.7.1 |
|
Setting this object to Lock will activate the network port
security lock.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.
|
| rptrSecuritySecureState |
.1.3.6.1.4.1.52.4.1.1.1.4.1.7.2 |
|
The status of source address security of the network. Ports on
the network that are secure(1), can be locked in order to
enable security. nonSecure(2) ports cannot be locked.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.
|
| rptrSecurityLearnState |
.1.3.6.1.4.1.52.4.1.1.1.4.1.7.3 |
|
The learn state of the network. This object will only
be applied to ports that are unlocked. If set to learn(1), all
addresses are deleted on the ports and learning begins once again.
If it is set to noLearn(2), learning stops on the port.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.
|
| rptrSecurityLearnMode |
.1.3.6.1.4.1.52.4.1.1.1.4.1.7.4 |
|
Get/Set the learn mode of the network. If set to onetime learn mode
oneTime(1), each port is capable of learning two addresses and
securing on both destination and source addresses once they are
locked. If set to continuous learn continuous(2), all addresses are
initially deleted and each port continuously replaces the existing
secure source address with the latest source address it sees.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.
|
| rptrPortGrpMgmtEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.2.1.1 |
|
An entry containing objects pertaining to port management
for a port group.
|
| rptrPortGrpPktStatsEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1 |
|
Defines a specific packet statistics entry.
|
| rptrPortGrpProtocolEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1 |
|
Defines a specific port group protocol statistics entry.
|
| rptrPortGrpFrameSzEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1 |
|
Defines a particular frame size entry.
|
| rptrPortGrpAlarmEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.2.3.1 |
|
An entry containing objects pertaining to port group alarms
for a port group.
|
| rptrPortGrpSrcAddrEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.2.4.1 |
|
Defines a specific active user entry.
|
| rptrPortGrpHwTrapEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1 |
|
Individual trap entries for port group enable/disable.
|
| rptrPortGrpSaTrapEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1 |
|
Individual trap entries for port group enable/disable.
|
| rptrPortGrpSrcAddrLockEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.2.6.1 |
|
DeDefines a status of a particular port group security lock.
|
| rptrPortMgmtEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.3.1.1 |
|
An entry containing objects pertaining to port management for
a port.
|
| rptrPortPktStatsEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1 |
|
Provides basic statistics for a specific port.
|
| rptrPortProtocolEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1 |
|
An entry containing objects pertaining to statistics about
protocols seen by different ports.
|
| rptrPortFrameSzEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1 |
|
Describes a set of frame size statistics for a specific port.
|
| rptrPortAlarmEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1 |
|
An entry containing objects pertaining to port alarm objects
for a port group.
|
| rptrPortRedundEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.3.4.1 |
|
An entry containing objects pertaining to port redundancy for
a port group.
|
| rptrPortSrcAddrEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.3.5.1 |
|
An entry containing objects pertaining to port source
address objects for a port group.
|
| rptrPortSrcAddrListEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.3.6.1 |
|
A specific source address that has been seen
|
| rptrPortHardwareEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.3.7.1 |
|
An entry containing objects pertaining to port hardware for a
hardware port group.
|
| rptrPortHwTrapEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1 |
|
Individual trap entries for port group enable/disable.
|
| rptrPortSaTrapEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1 |
|
Individual trap entries for port group enable/disable.
|
| rptrPortSecurityEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1 |
|
Defines lock status for this particular entry.
|
| rptrPortSecurityListEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1 |
|
An entry containing objects pertaining to source address locks
for a port group.
|
| rptrPortAssocEntry |
.1.3.6.1.4.1.52.4.1.1.1.4.4.1.1 |
|
Describes a particular port association entry.
|
| rptrRedundCrctId |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.1 |
|
Returns the index for a member circuit in the table of
redundant circuits.
|
| rptrRedundCrctName |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.2 |
|
Get/Set the name of the indicated circuit.
|
| rptrRedundCrctRetrys |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.3 |
|
Get/Set the the number of unanswered polls allowed for
the circuit.
|
| rptrRedundCrctNumBPs |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.4 |
|
Get the number of board/port combinations associated with
the circuit.
|
| rptrRedundCrctNumAddr |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.5 |
|
Get the number of IP Addresses associated with the circuit.
|
| rptrRedundCrctAddAddr |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.6 |
|
Add an IP Address to the polling list for the indicated circuit.
|
| rptrRedundCrctDelAddr |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.7 |
|
Delete an IP Address from the polling list of the indicated
circuit.
|
| rptrRedundCrctEnable |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.8 |
|
If this object is set to Enable, the circuit is enabled. If
this object is set to Disable, the circuit is disbabled. When
read, this object returns the state of the object based on the
last request made.
|
| rptrRedundCrctReset |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.9 |
|
If this object is set to Reset, the circuit is reset. All
of the circuit's associated boards and ports are returned to
NOT_USED, any associated IP Addresses are purged from the
circuit's address list, the name is cleared, and the retry
count is reset to a default value. Setting this object to
NoReset has no effect. When read, NoReset is always returned.
|
| rptrRedundPortCrctId |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.2 |
|
A unique value identifying a member circuit in the table of
redundant circuits. This value is similar to rptrRedundCrctId.
|
| rptrRedundPortId |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.1 |
|
A unique value identifying an element in a sequence of member
ports which belong to a circuit in the table of redundant
circuits. This value is not a port number; rather it is a value
which goes from 1 to the maximum number of ports which may be
included in a redundant circuit.
|
| rptrRedundPortNum |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.3 |
|
Returns the port number of a member port belonging to a redundant
circuit.
|
| rptrRedundPortBoardNum |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.4 |
|
Returns the board number of a member port belonging to a
redundant circuit.
|
| rptrRedundPortType |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.5 |
|
Return the state of a port associated with the indicated circuit.
|
| rptrRedundAddrCrctId |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.2 |
|
A unique value identifying a member circuit in the table of
redundant circuits. This value is similar to rptrRedundCrctId.
|
| rptrRedundAddrId |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.1 |
|
A unique value identifying an element in a sequence of member
IP Addresses which belong to a circuit in the table of redundant
circuits. This value goes from 1 to the maximum number of IP
Addresses which may be included in a redundant circuit.
|
| rptrRedundAddrIPAddr |
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.3 |
|
Returns an IP Address associated with the indicated circuit.
|
| rptrSrcAddrListId |
.1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.1 |
|
Returns an index into a table of source address seen by this
repeater.
|
| rptrSrcAddrAddressList |
.1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.2 |
|
Returns a source address seen by this repeater.
|
| rptrSrcAddrSrcTableEntryId |
.1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.1 |
|
Returns the source address to which this table's information
pertains.
|
| rptrSrcAddrSrcTableEntryPort |
.1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.2 |
|
Returns the port# of the port that sourced the source address.
|
| rptrSrcAddrSrcTableEntryPortGroup |
.1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.3 |
|
Returns the port group# of the port that sourced the source address.
|
| rptrPortGrpMgmtGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.1 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortGrpMgmtName |
.1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.2 |
|
Gets/Sets a name for the specified port group.
|
| rptrPortGrpMgmtPortCount |
.1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.3 |
|
Get total number of ports contained on the board.
Notice that this is the physical port count.
|
| rptrPortGrpMgmtPortsEnable |
.1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.4 |
|
Setting this object to Enable will cause all the ports
residing in this network segment to be enabled. Setting
this object to noEnable will have no effect. When read
this object will always return noEnable.
|
| rptrPortGrpMgmtPortsOn |
.1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.5 |
|
Get total number of ON ports in this port group.
|
| rptrPortGrpMgmtPortsOper |
.1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.6 |
|
Get total number of operational ports in the port group.
|
| rptrPortGrpMgmtLogPortCount |
.1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.7 |
|
Get total number of ports contained in this port group.
|
| rptrPortGrpPktStatsId |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.1 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortGrpPktStatsPkts |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.2 |
|
Return this port group's total received packets.
|
| rptrPortGrpPktStatsBytes |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.3 |
|
Return this port group's total received bytes.
|
| rptrPortGrpPktStatsColls |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.4 |
|
Return this port group's total collisions.
|
| rptrPortGrpPktStatsErrors |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.5 |
|
Return this port group's total errors.
|
| rptrPortGrpPktStatsAlign |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.6 |
|
Return this port group's total frame alignment errors.
|
| rptrPortGrpPktStatsCRC |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.7 |
|
Return this port group's total CRC errors.
|
| rptrPortGrpPktStatsOOW |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.8 |
|
Return this port group's total out-of-window collisions.
|
| rptrPortGrpPktStatsBroadcasts |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.9 |
|
Return this port group's total received broadcast packets.
|
| rptrPortGrpPktStatsMulticasts |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.10 |
|
Return this port group's total received multicast packets.
|
| rptrPortGrpProtocolId |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.1 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortGrpProtocolOSI |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.2 |
|
Return this port group's total received OSI packets.
|
| rptrPortGrpProtocolNovell |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.3 |
|
Return this port group's total received Novell packets.
|
| rptrPortGrpProtocolBanyan |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.4 |
|
Return this port group's total received Banyan packets.
|
| rptrPortGrpProtocolDECNet |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.5 |
|
Return this port group's total received DECNet packets.
|
| rptrPortGrpProtocolXNS |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.6 |
|
Return this port group's total received XNS packets.
|
| rptrPortGrpProtocolIP |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.7 |
|
Return this port group's total received TCP/IP packets.
|
| rptrPortGrpProtocolCtron |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.8 |
|
Return this port group's total received CTRON Management packets.
|
| rptrPortGrpProtocolAppletalk |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.9 |
|
Return this port group's total received Appletalk packets.
|
| rptrPortGrpProtocolOther |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.10 |
|
Return this port group's total received unknown protocol packets.
|
| rptrPortGrpFrameSzId |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.1 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortGrpFrameSzRunt |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.2 |
|
Return this port group's total received packets of size less
than 64 bytes.
|
| rptrPortGrpFrameSz64To127 |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.3 |
|
Return this port group's total received packets of size between
64 and 127 bytes.
|
| rptrPortGrpFrameSz128To255 |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.4 |
|
Return this port group's total received packets of size between
128 and 255 bytes.
|
| rptrPortGrpFrameSz256To511 |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.5 |
|
Return this port group's total received packets of size between
256 and 511 bytes.
|
| rptrPortGrpFrameSz512To1023 |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.6 |
|
Return this port group's total received packets of size between
512 and 1023 bytes.
|
| rptrPortGrpFrameSz1024To1518 |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.7 |
|
Return this port group's total received packets of size between
1024 and 1518 bytes.
|
| rptrPortGrpFrameSzGiant |
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.8 |
|
Return this port group's total received packets of size greater
than 1518 bytes.
|
| rptrPortGrpAlarmId |
.1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.1 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortGrpAlarmTrafEnable |
.1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.2 |
|
Get returns whether traffic alarms are enabled/disabled.
Set allows for enabling/disabling of traffic alarms.
|
| rptrPortGrpAlarmTrafThreshold |
.1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.3 |
|
The maximum number of packets that will be allowed before
an alarm is generated.
|
| rptrPortGrpAlarmTrafGrpDisable |
.1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.4 |
|
Set will permit a port group to be disabled on a traffic alarm
condition. Get will show whether the port group disabling is
allowed or not.
|
| rptrPortGrpAlarmCollEnable |
.1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.5 |
|
Get returns whether collision alarms are enabled/disabled.
Set allows for enabling/disabling of collision alarms.
|
| rptrPortGrpAlarmCollThreshold |
.1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.6 |
|
The collision threshold is the maximum number of collisions
within the time base that will be allowed before an alaram
is generated.
|
| rptrPortGrpAlarmCollBdDisable |
.1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.7 |
|
Set will permit a port group to be disabled on a collision alarm
condition. Get will show whether the port group disabling is allowed
or not.
|
| rptrPortGrpAlarmErrEnable |
.1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.8 |
|
Get returns whether error alarms are enabled/disabled.
Set allows for enabling/disabling of error alarms.
|
| rptrPortGrpAlarmErrThreshold |
.1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.9 |
|
Get/Set the percentage of errors per good packet within the
timebase that will cause an alarm.
|
| rptrPortGrpAlarmErrSource |
.1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.10 |
|
Get/Set a bit encoded map of which errors to include in the
error sum, as follows:
CRC_errors - Bit 0 - Least Significant Bit
runts - Bit 1
OOW_colls - Bit 2
align_errs - Bit 3
undefined - Bit 4
Giants - Bit 5
|
| rptrPortGrpAlarmErrGrpDisable |
.1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.11 |
|
Set will permit a port group to be disabled on an error alarm
condition. Get will show whether the port group disabling is
allowed or not.
|
| rptrPortGrpAlarmBroadEnable |
.1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.12 |
|
Get returns whether broadcast alarms are enabled/disabled.
Set allows for enabling/disabling of broadcast alarms.
|
| rptrPortGrpAlarmBroadThreshold |
.1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.13 |
|
The broadcase threshold represents the maximum number of
broadcasts that are allowed during the time base before an
alarm is generated.
|
| rptrPortGrpAlarmBroadGrpDisable |
.1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.14 |
|
Set will permit a port group to be disabled on a broadcast alarm
condition. Get will show whether the port group disabling is
allowed or not.
|
| rptrPortGrpSrcAddrId |
.1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.1 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortGrpSrcAddrActiveUsers |
.1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.2 |
|
Returns the total number of active users seen by this port group.
|
| rptrPortGrpHwTrapSetGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.1 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortGrpHwTrapSetLink |
.1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.2 |
|
Enables and disables link traps for the specified port group.
Setting a value of disable(1) is equivalent to setting all instances
of rptrPortHwTrapSetLink to a value of disable(1). Setting a value
of enable(2) is equivalent to setting all instances of
rptrPortHwTrapSetLink to a value of disable(2). Setting a value of
other(3) is not allowed.
This object will read with the value of disable(1) if all instances
of rptrPortHwTrapSetLink for this port group are currently set
to a value of disable(1).
This object will read with the value of enable(2) if all instances
of rptrPortHwTrapSetLink for this port group are currently set
to a value of enable(2).
This object will read with the value of other(3) if all instances
of rptrPortHwTrapSetLink for this port group are not currently
set to a value the same value.
|
| rptrPortGrpHwTrapSetSeg |
.1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.3 |
|
Enables and disables segmentation traps for the specified port group.
Setting a value of disable(1) is equivalent to setting all instances
of rptrPortHwTrapSetSeg to a value of disable(1). Setting a value
of enable(2) is equivalent to setting all instances of
rptrPortHwTrapSetSeg to a value of disable(2). Setting a value of
other(3) is not allowed.
This object will read with the value of disable(1) if all instances
of rptrPortHwTrapSetSeg for this port group are currently set
to a value of disable(1).
This object will read with the value of enable(2) if all instances
of rptrPortHwTrapSetSeg for this port group are currently set
to a value of enable(2).
This object will read with the value of other(3) if all instances
of rptrPortHwTrapSetSeg for this port group are not currently
set to a value the same value.
|
| rptrPortGrpSaTrapSetGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1.1 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortGrpSaTrapSetSrcaddr |
.1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1.2 |
|
Enables and disables source address traps for the specified port group.
Setting a value of disable(1) is equivalent to setting all instances
of rtprPortSaTrapSetSrcaddr to a value of disable(1). Setting a value
of enable(2) is equivalent to setting all instances of
rtprPortSaTrapSetSrcaddr to a value of disable(2). Setting a value of
other(3) is not allowed.
This object will read with the value of disable(1) if all instances
of rptrPortSaTrapSetSrcaddr for this port group are currently set
to a value of disable(1).
This object will read with the value of enable(2) if all instances
of rptrPortSaTrapSetSrcaddr for this port group are currently set
to a value of enable(2).
This object will read with the value of other(3) if all instances
of rptrPortSaTrapSetSrcaddr for this port group are not currently
set to a value the same value.
|
| rptrPortGrpSrcAddrLockGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.1 |
|
Defines a particular port group for which this source address
security lock information pertains.
|
| rptrPortGrpSrcAddrLock |
.1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.2 |
|
Allows setting of the security lock status for this port group.
unlock(1) - Unlocks the source address lock this group,
lock(2) - Locks the source address for this group,
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.
|
| rptrPortGrpSASecuritySecureState |
.1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.3 |
|
The state of the source addressing security for this port group.
Ports on the port group that are secure(1), can be locked
in order to enable security. When a value of nonSecure(2) is
returned ports cannot be locked.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.
|
| rptrPortGrpSASecurityLearnState |
.1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.4 |
|
The learn state of source addressing security for this port group.
This object will only be applied to ports that are unlocked. If set
to learn(1), all addresses are deleted on the port and learning begins
once again. If it is set to noLearn(2), learning stops on the port.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.
|
| rptrPortGrpSASecurityLearnMode |
.1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.5 |
|
The learn mode of source addressing security port group. If set
to oneTime(1), each port is capable of learning two addresses and
securing on both destination and source addresses once they are
locked. If set to continuous(2), all addresses are initially
deleted and each port continuously replaces the existing secure
source address with latest source address it sees.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.
|
| rptrPortMgmtPortGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.2 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortMgmtPortId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.1 |
|
Returns an index to a port for which the information in this
table pertains.
|
| rptrPortMgmtName |
.1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.3 |
|
Sets/Gets an ASCII name assigned to this port.
|
| rptrPortMgmtAdminState |
.1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.4 |
|
Setting this object to Enable will cause port to be enabled.
Setting this object to Disable will cause
the port to be disabled. When read this object will return
the state of the object per the last request.
|
| rptrPortMgmtOperState |
.1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.5 |
|
Get port operational status.
|
| rptrPortMgmtPortType |
.1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.6 |
|
Uniquely defines the repeater port type. A authoritative
identification for a port type. By convention, this value
is allocated within the SMI enterprises subtree
(1.3.6.1.4.1), and provides an easy and unambiguous means to
determine the type of repeater port.
|
| rptrPortPktStatsPortGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.2 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortPktStatsPortId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.1 |
|
Returns an index to a port for which the information in this
table pertains.
|
| rptrPortPktStatsPackets |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.3 |
|
Get this port's total received packets.
|
| rptrPortPktStatsBytes |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.4 |
|
Get this port's total received bytes.
|
| rptrPortPktStatsColls |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.5 |
|
Get this port's total collisions.
|
| rptrPortPktStatsErrors |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.6 |
|
Get this port's total errors.
|
| rptrPortPktStatsAlign |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.7 |
|
Get this port's total frame alignment errors.
|
| rptrPortPktStatsCRC |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.8 |
|
Get this port's total CRC errors.
|
| rptrPortPktStatsOOW |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.9 |
|
Get this port's total out-of-window collisions.
|
| rptrPortPktStatsBroadcasts |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.10 |
|
Get this port's total received broadcast packets.
|
| rptrPortPktStatsMulticasts |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.11 |
|
Get this port's total received multicast packets.
|
| rptrPortProtocolPortGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.2 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortProtocolPortId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.1 |
|
Returns an index to a port for which the information in this
table pertains.
|
| rptrPortProtocolOSI |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.3 |
|
Get this port's total received OSI protocol packets.
|
| rptrPortProtocolNovell |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.4 |
|
Get this port's total received Novell protocol packets.
|
| rptrPortProtocolBanyan |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.5 |
|
Get this port's total received Banyan protocol packets.
|
| rptrPortProtocolDECNet |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.6 |
|
Get this port's total received DECNet protocol packets.
|
| rptrPortProtocolXNS |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.7 |
|
Get this port's total received XNS protocol packets.
|
| rptrPortProtocolIP |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.8 |
|
Get this port's total received TCP/IP protocol packets.
|
| rptrPortProtocolCtron |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.9 |
|
Get this port's total received CTRON Management protocol packets.
|
| rptrPortProtocolAppletalk |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.10 |
|
Get this port's total received Appletalk protocol packets.
|
| rptrPortProtocolOther |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.11 |
|
Get this port's total received unknown protocol packets.
|
| rptrPortFrameSzPortGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.2 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortFrameSzPortId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.1 |
|
Returns an index to a port for which the information in this
table pertains.
|
| rptrPortFrameSzRunt |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.3 |
|
Get this port's total received packets of size less than 64 bytes.
|
| rptrPortFrameSz64To127 |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.4 |
|
Get this port's total received packets of size between 64 and
127 bytes.
|
| rptrPortFrameSz128To255 |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.5 |
|
Get this port's total received packets of size between 128
and 255 bytes.
|
| rptrPortFrameSz256To511 |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.6 |
|
Get this port's total received packets of size between 256
and 511 bytes.
|
| rptrPortFrameSz512To1023 |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.7 |
|
Get this port's total received packets of size between 512
and 1023 bytes.
|
| rptrPortFrameSz1024To1518 |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.8 |
|
Get this port's total received packets of size between 1024
and 1518 bytes.
|
| rptrPortFrameSzGiant |
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.9 |
|
Get this port's total received packets of size greater than
1518 bytes.
|
| rptrPortAlarmPortGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.2 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortAlarmPortId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.1 |
|
Returns an index to a port for which the information in this
table pertains.
|
| rptrPortAlarmTrafEnable |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.3 |
|
Get returns whether traffic alarms are enabled/disabled.
Set allows for enabling/disabling of traffic alarms.
|
| rptrPortAlarmTrafThreshold |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.4 |
|
The maximum number of packets that will be allowed before
an alarm is generated.
|
| rptrPortAlarmTrafPortDisable |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.5 |
|
Set will permit a port to be disabled on a traffic alarm
condition. Get will show whether the port disabling is allowed
or not.
|
| rptrPortAlarmCollEnable |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.6 |
|
Get returns whether collision alarms are enabled/disabled.
Set allows for enabling/disabling of collision alarms.
|
| rptrPortAlarmCollThreshold |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.7 |
|
The collision threshold is the maximum number of collisions
within the time base that will be allowed before an alaram
is generated.
|
| rptrPortAlarmCollPortDisable |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.8 |
|
Set will permit a port to be disabled on a collision alarm
condition. Get will show whether the port disabling is allowed
or not.
|
| rptrPortAlarmErrEnable |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.9 |
|
Get returns whether error alarms are enabled/disabled.
Set allows for enabling/disabling of error alarms.
|
| rptrPortAlarmErrThreshold |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10 |
|
Get/Set the percentage of errors per good packet within the
timebase that will cause an alarm.
|
| rptrPortAlarmErrSource |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.11 |
|
Get/Set a bit encoded map of which errors to include in the
error sum, as follows:
CRC_errors - Bit 0 - Least Significant Bit
runts - Bit 1
OOW_colls - Bit 2
align_errs - Bit 3
undefined - Bit 4
Giants - Bit 5
|
| rptrPortAlarmErrPortDisable |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.12 |
|
Set will permit a port to be disabled on an error alarm condition.
Get will show whether the port disabling is allowed or not.
|
| rptrPortAlarmBroadEnable |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.13 |
|
Get returns whether broadcast alarms are enabled/disabled.
Set allows for enabling/disabling of broadcast alarms.
|
| rptrPortAlarmBroadThreshold |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.14 |
|
The broadcase threshold represents the maximum number of
broadcasts that are allowed during the time base before an
alarm is generated.
|
| rptrPortAlarmBroadPortDisable |
.1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.15 |
|
Set will permit a port to be disabled on a broadcast alarm
condition. Get will show whether the port disabling is allowed
or not.
|
| rptrPortRedundPortGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.2 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortRedundPortId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.1 |
|
Returns an index to a port for which the information in this
table pertains.
|
| rptrPortRedundCrctNum |
.1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.3 |
|
Get/Set redundant circuit number of redundant circuit that port
is or is to be associated with.
|
| rptrPortRedundType |
.1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.4 |
|
Get/Set redundant port type.
|
| rptrPortRedundStatus |
.1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.5 |
|
Get/Set redundant port status.
|
| rptrPortSrcAddrPortGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.2 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortSrcAddrPortId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.1 |
|
Returns an index to a port for which the information in this
table pertains.
|
| rptrPortSrcAddrTopoState |
.1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.3 |
|
Returns the topological state of the port.
|
| rptrPortSrcAddrForceTrunk |
.1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.4 |
|
When this object is set to Force it causes the port
to be placed into a Trunk topological state whether
the network traffic would warrant such a state or not.
When this object is set to NoForce it allows the port
to assume the topological state it would naturally
assume based on the network activity across it.
When read this object reports the current setting.
|
| rptrPortSrcAddrActiveUsers |
.1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.5 |
|
Returns the total number of active users seen by this port.
|
| rptrPortSrcAddrListPortGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.3 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortSrcAddrListPortId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.2 |
|
Returns an index to a port for which the information in this
table pertains.
|
| rptrPortSrcAddrListId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.1 |
|
Returns an index associated with the number of address to be returned.
|
| rptrPortSrcAddrAddressList |
.1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.4 |
|
Returns a source address seen on this port.
|
| rptrPortHardwarePortGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.2 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortHardwarePortId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.1 |
|
Returns an index to a port for which the information in this
table pertains.
|
| rptrPortHardwareSegStatus |
.1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.3 |
|
Returns port segmentation status.
|
| rptrPortHardwareLinkStatus |
.1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.4 |
|
Returns port link status.
|
| rptrPortHwTrapSetPortGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.2 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortHwTrapSetPortId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.1 |
|
Returns an index to a port for which the information in this
table pertains.
|
| rptrPortHwTrapSetLink |
.1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.3 |
|
Enables and disables link traps for this port.
|
| rptrPortHwTrapSetSeg |
.1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.4 |
|
Enables and disables segmentation traps for this port.
|
| rptrPortSaTrapSetPortGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.2 |
|
Returns an index to a port group for which the information in
this table pertains.
|
| rptrPortSaTrapSetPortId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.1 |
|
Returns an index to a port for which the information in this
table pertains.
|
| rptrPortSaTrapSetSrcaddr |
.1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.3 |
|
Enables and disables source address traps for this port.
|
| rptrPortSecurityPortGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.1 |
|
The port Group ID for which this source address lock entry
pertains.
|
| rptrPortSecurityPortId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.2 |
|
The port ID for which this source address lock entry pertains.
|
| rptrPortSecurityLockStatus |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.3 |
|
Defines the lock status for this particular port entry.
|
| rptrPortSecurityLockAddAddress |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.4 |
|
Setting a value to this object will cause a new entry to be
added to the rptrPortSecurityListTable. When read this object
will display an OCTET STRING of SIZE 6 with each octet containing
a 0.
In general it is possible to add addresses at anytime. However
there are several instances where the firmware and or hardware
can not support the operation. In these instances an error will
be returned if a addition is attempted.
|
| rptrPortSecurityLockDelAddress |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.5 |
|
Setting a value to this object will cause corresponding entry
in the rptrPortSecurityListTable to be deleted. When read
this object returns an OCTET STRING of length 6 with each octet
having the value '0'.
In general it is possible to delete locked addresses at any time.
however there are instances where it is not supported in which
case an error will be returned.
|
| rptrPortSecurityDisableOnViolation |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.6 |
|
Designates whether port is disabled if its source address
is violated. A source address violation occurs when a
address is detected which is not in the source address list for
this port. If the port is disabled due to the source address
violation it can be enabled by setting rptrPortMgmtAdminState.
|
| rptrPortSecurityFullSecEnabled |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.7 |
|
A port that is set to full security and is locked will
scramble ALL packets, which are not contained in the expected
address list, including broadcasts and multicasts. A port
that is set to partial security will allow broadcasts and
multicasts to repeat unscrambled.
|
| rptrPortSecuritySecureState |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.8 |
|
The secure state of the port. If the port is secure(1), it
can be locked in order to enable security. A nonSecure(2)
port cannot be locked.
|
| rptrPortSecurityForceNonSecure |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.9 |
|
The force non-secure state of port. If the port is Forced,
Non-Secure via a value of forceNonSecure(2), it is put into a
Non-Secure state, in which case it cannot be locked. If a port is
not forced noForce(1), then it will take on its natural state,
according to the traffic flow on the port.
|
| rptrPortSecurityLearnState |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.10 |
|
The learn state of the port. This object will only
be applied to a port that is unlocked. If set to learn(1), all
addresses are deleted on the port and learning begins once again.
If it is set to noLearn(2), learning stops on the port.
|
| rptrPortSecurityLearnMode |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.11 |
|
The learn mode of the port. If set to oneTime(1),
the port is capable of learning two addresses and securing
on both destination and source addresses (upon locking port).
If set to continuous(2), all addresses are
initially deleted and the port continuously replaces the existing
secure source address with the latest source address it sees.
|
| rptrPortSecurityListPortGrpId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.1 |
|
The port group for which this security list entry pertains.
|
| rptrPortSecurityListPortId |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.2 |
|
The port ID for which this source address lock list pertains.
|
| rptrPortSecurityListIndex |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.3 |
|
A unique index for the source address entries.
|
| rptrPortSecurityListAddress |
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.4 |
|
Defines the particular source address that has been locked.
|
| rptrPortAssocBoard |
.1.3.6.1.4.1.52.4.1.1.1.4.4.1.1.1 |
|
The board number for which this port association information
pertains.
|
| rptrPortAssocStatus |
.1.3.6.1.4.1.52.4.1.1.1.4.4.1.1.2 |
|
This object describes the status of the user selectable port.
On a TPXMIM34 this is port 13 which may either be an EPIM or
default configuration.
A value of defaultPort(1) restores the default configuration.
A value of otherPort(2) may imply the use of the EPIM connection.
|
