SYSTEM-RESOURCE-MIB.mib object view, vendor Enterasys-Networks-Inc
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file SYSTEM-RESOURCE-MIB and use it to monitor vendor specific OID's.
SYSTEM-RESOURCE-MIB file content
Object view of SYSTEM-RESOURCE-MIB:
| Scalar Object |
| sysResourceCpuEntry |
.1.3.6.1.4.1.52.4.1.1.12.1.1.1 |
|
Defines a particular CPU entry.
|
| sysResourceEntry |
.1.3.6.1.4.1.52.4.1.1.12.1.2.1 |
|
Describes a particular installed set of system
resources.
|
| sysResManagementCpuResource |
.1.3.6.1.4.1.52.4.1.1.12.2.1 |
|
The desired amount of CPU bandwith reserved for management
purposes. For example, in the default state (1), the device
will devote all CPU bandwith to switching if necessary therefore
possibly dropping management frames. If limited (2) is selected,
management of the device may appear slow while under maximum
switching capabilities although management will still be possible
which may result in dropped frames. If full (3) is selected,
management of the device is always possible and acts as if there is
no switching load on the device, which may result in dropped frames.
|
| switchLoad |
.1.3.6.1.4.1.52.4.1.1.12.2.2 |
|
The returned value represents the current switch load
based upon a percentage of maximum switching capacity
where maximum switching capacity is 100%.
|
| peakSwitchload |
.1.3.6.1.4.1.52.4.1.1.12.2.3 |
|
The peak load which has occured on this switch. The value
returned represents The peak percentage of switch load based
upon a percentage of maximum switch load which is 100%.
|
| peakSwitchLoadTime |
.1.3.6.1.4.1.52.4.1.1.12.2.4 |
|
The time at which the peak switch load occured. The value
returned will represent system up time at which the peak occured.
|
| peakSwitchClear |
.1.3.6.1.4.1.52.4.1.1.12.2.5 |
|
This object is used to clear the values found in peakSwitchload
and peakSwitchLoadTime.
When set with a value of clear(1) the values will be cleared.
When read, a value of noClear(2) will be returned. A set of noClear(2)
will have no effect.
|
| Tabular Object |
| sysResSlotID |
.1.3.6.1.4.1.52.4.1.1.12.1.1.1.1 |
|
The slot for which this CPU information pertains.
|
| sysResCpuIndex |
.1.3.6.1.4.1.52.4.1.1.12.1.1.1.2 |
|
An identifier for the CPU on a per slot basis.
|
| sysResCpuType |
.1.3.6.1.4.1.52.4.1.1.12.1.1.1.3 |
|
The processor (CPU) type.
|
| sysResCpuSpeed |
.1.3.6.1.4.1.52.4.1.1.12.1.1.1.4 |
|
The speed of the processor in mega-hertz.
|
| sysResCpuID |
.1.3.6.1.4.1.52.4.1.1.12.1.1.1.5 |
|
A system wide unique identifier for each CPU.
|
| sysResInstalledLocalMemory |
.1.3.6.1.4.1.52.4.1.1.12.1.1.1.6 |
|
Total installed local memory 'DRAM' used for code and
data. This is reported in mega-bytes.
|
| sysResUsedLocalMemory |
.1.3.6.1.4.1.52.4.1.1.12.1.1.1.7 |
|
The current amount of local memory 'DRAM' that is
currently being used for code and data. This is reported
in bytes.
|
| sysResInstalledNvram |
.1.3.6.1.4.1.52.4.1.1.12.1.2.1.1 |
|
The total installed non-volatile memory 'NVRAM'. This
is reported in K-bytes.
|
| sysResInstalledFlash |
.1.3.6.1.4.1.52.4.1.1.12.1.2.1.2 |
|
The total installed flash memory. This is reported in
K-bytes.
|
| sysResInstalledSharedMemory |
.1.3.6.1.4.1.52.4.1.1.12.1.2.1.3 |
|
The total amount of shared memory that is installed. This
is reported in K-bytes.
|
| sysResUsedNvram |
.1.3.6.1.4.1.52.4.1.1.12.1.2.1.4 |
|
The current amount of non-volatile memory 'NVRAM' that
is currently being used for data. This is reported in
bytes.
|
| sysResUsedFlash |
.1.3.6.1.4.1.52.4.1.1.12.1.2.1.5 |
|
The current amount of flash memory that is
currently being used for code and data. This is reported
in bytes.
|
| sysResUsedSharedMemory |
.1.3.6.1.4.1.52.4.1.1.12.1.2.1.6 |
|
The current amount of shared memory that is currently
being used for data. This is reported in bytes.
|
| Table |
| sysResourceCpuTable |
.1.3.6.1.4.1.52.4.1.1.12.1.1 |
|
This table defines the CPus present within the system.
|
| sysResourceTable |
.1.3.6.1.4.1.52.4.1.1.12.1.2 |
|
This table describes total installed system resources.
|
| Object Identifier |
| sysResourceInstalled |
.1.3.6.1.4.1.52.4.1.1.12.1 |
| sysResourceSwitch |
.1.3.6.1.4.1.52.4.1.1.12.2 |
