ENTERASYS-IEEE802DOT11EXT-MIB device MIB details by Enterasys Networks
ENTERASYS-IEEE802DOT11EXT-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing ENTERASYS-IEEE802DOT11EXT-MIB.
| Vendor: | Enterasys Networks |
|---|---|
| Mib: | ENTERASYS-IEEE802DOT11EXT-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
ENTERASYS-IEEE802DOT11EXT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, MacAddress, AutonomousType FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB ifIndex FROM IF-MIB EnabledStatus FROM P-BRIDGE-MIB dot11WEPDefaultKeyIndex FROM IEEE802dot11-MIB etsysModules FROM ENTERASYS-MIB-NAMES; etsysDot11ExtMIB MODULE-IDENTITY LAST-UPDATED "200203071945Z" -- Thu Mar 7 19:45 GMT 2002 ORGANIZATION "Enterasys Networks, Inc" CONTACT-INFO "Postal: Enterasys Networks 35 Industrial Way, P.O. Box 5005 Rochester, NH 03867-0505 Phone: +1 603 332 9400 E-mail: support@enterasys.com WWW: http://www.enterasys.com" DESCRIPTION "This mib module defines a portion of the SNMP enterprise MIBs under Enterasys Networks enterprise OID as an extension to the IEEE802Dot11 MIB. This Enterasys Networks Proprietary MIB was designed to be used for read-write access to configuration objects not provided by IEEE802.11 MIB, or any other standard MIB." REVISION "200203071945Z" -- Thu Mar 7 19:45 GMT 2002 DESCRIPTION "Removed some comments so that it would compile." REVISION "200105081800Z" DESCRIPTION "The initial version of this MIB module" ::= { etsysModules 9 } -- ---------------------------------------------------------------------------- -- MIB Objects -- ---------------------------------------------------------------------------- etsysDot11ExtObjects OBJECT IDENTIFIER ::= { etsysDot11ExtMIB 1 } etsysDot11ExtLinkTest OBJECT IDENTIFIER ::= { etsysDot11ExtObjects 1 } etsysDot11ExtGeneral OBJECT IDENTIFIER ::= { etsysDot11ExtObjects 2 } etsysDot11ExtBldg OBJECT IDENTIFIER ::= { etsysDot11ExtObjects 3 } etsysDot11ExtWEP OBJECT IDENTIFIER ::= { etsysDot11ExtObjects 4 } etsysDot11ExtEffect OBJECT IDENTIFIER ::= { etsysDot11ExtObjects 5 } -- ---------------------------------------------------------------------------- etsysDot11ExtLinkTestTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysDot11ExtLinkTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects to test the link between a requester (entity which sends out the management request message) and a responder (entity which responds with the appropriate management response message). An entity could be either an Access Point(AP) or a station (STA)." ::= { etsysDot11ExtLinkTest 1 } etsysDot11ExtLinkTestEntry OBJECT-TYPE SYNTAX EtsysDot11ExtLinkTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the LinkTest Table. By means of message transmission between requester and responder, the communication quality between the two stations can be determined. The requester and responder can be any combination of AP and STA except STA to STA in an Infrastructure Network (network which has at least one AP present." INDEX {ifIndex} ::= { etsysDot11ExtLinkTestTable 1 } EtsysDot11ExtLinkTestEntry ::= SEQUENCE { etsysDot11ExtLTRemoteStationMAC MacAddress, etsysDot11ExtLTRemoteStationName SnmpAdminString, etsysDot11ExtLTTrigger INTEGER, etsysDot11ExtLTRemoteContents OCTET STRING } etsysDot11ExtLTRemoteStationMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address for the remote station to participate in the Link Test. To initiate a search for a participating station, write the broadcast address (FF-FF-FF-FF-FF-FF) to this variable." ::= { etsysDot11ExtLinkTestEntry 1 } etsysDot11ExtLTRemoteStationName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The wireless station name of the remote station participating in the Link Test." ::= { etsysDot11ExtLinkTestEntry 2 } etsysDot11ExtLTTrigger OBJECT-TYPE SYNTAX INTEGER (1..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Writing a 1 to this variable causes a single Link Test request message to be sent to the remote station." ::= { etsysDot11ExtLinkTestEntry 3 } etsysDot11ExtLTRemoteContents OBJECT-TYPE SYNTAX OCTET STRING (SIZE (84)) MAX-ACCESS read-only STATUS current DESCRIPTION "The exact byte-by-byte contents of the Link Test packet returned by the remote station." ::= { etsysDot11ExtLinkTestEntry 4 } etsysDot11ExtGeneralTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysDot11ExtGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all the objects that must be configured on every radio card installed in the Access Point regardless of the operating mode in use." ::= { etsysDot11ExtGeneral 1 } etsysDot11ExtGeneralEntry OBJECT-TYPE SYNTAX EtsysDot11ExtGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the Dot11General Table. This allows for multiple instances of radio cards in the Access Point." INDEX {ifIndex} ::= { etsysDot11ExtGeneralTable 1 } EtsysDot11ExtGeneralEntry ::= SEQUENCE { etsysDot11ExtPCCardType INTEGER, etsysDot11ExtPCCardVersions SnmpAdminString, etsysDot11ExtBridgeMode INTEGER, etsysDot11ExtResetOptions INTEGER, etsysDot11ExtSystemScale INTEGER, etsysDot11ExtSecureAccess EnabledStatus, etsysDot11ExtMulticastTxRate INTEGER, etsysDot11ExtIntraBSSRelay EnabledStatus, etsysDot11ExtStationName SnmpAdminString } etsysDot11ExtPCCardType OBJECT-TYPE SYNTAX INTEGER { none(1), deprecatedValue1(2), deprecatedValue2(3), deprecatedValue3(4), ds80211b(5), -- IEEE 802.11 2.4Ghz DS 11Mb card ds80211a(6), -- IEEE 802.11 2.4Ghz DS 54Mb card unknown(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of PC card inserted in the Access Point." ::= { etsysDot11ExtGeneralEntry 1 } etsysDot11ExtPCCardVersions OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the version identifiers for the PC card. This will indicate both the Hardware and the Firmware versions." ::= { etsysDot11ExtGeneralEntry 2 } etsysDot11ExtBridgeMode OBJECT-TYPE SYNTAX INTEGER { workgroup(1), lanToLanEndpoint(2), lanToLanMultipoint(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "CURRENT Access Point bridge mode state. In workgroup mode all communications between clients passes through the Access Point. LAN-to-LAN mode is the improved name for 802.11. LAN-to-LAN used to be called full-bridge pre-802.11. This mode is a method of connecting two wired LAN's via a wireless link, also referred to as Point-to-Point mode. LAN-to-LAN-HUB mode allows the interconnection of multiple (ie. more than two) wired LAN's via wireless links, also referred to as Point-to-MultiPoint mode. When operating in multimode the Access Point can simultaneously operate in both workgroup mode and either Point-to-Point or Point-to-MultiPoint modes. This object must be saved across a system reset and/or a power cycle." ::= { etsysDot11ExtGeneralEntry 3 } etsysDot11ExtResetOptions OBJECT-TYPE SYNTAX INTEGER { noReset (0), resetRadioCardIfNecessary (1), resetRadioCardRegardless (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "noReset (0) No reset is performed. A 'get' on this object always returns this value. resetRadioCardIfNecessary (1) Some parameters can only be given to the card at initialization time, and if any of these are changed, a card reset will be necessary for them to go into place. The card will be reset at this time if any of those parameters have indeed been changed. resetRadioCardRegardless (2) Forces the radio card to reset, even if no radio card parameters have been changed." ::= { etsysDot11ExtGeneralEntry 4 } etsysDot11ExtSystemScale OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the CURRENT Access Point density in the Extended Service Set (ESS). This object must be saved across a system reset and/or a power cycle." ::= { etsysDot11ExtGeneralEntry 5 } etsysDot11ExtSecureAccess OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "When this mode is set to enabled, the AP will only associate with stations that have the same network name as the AP. When this mode is set to disabled, a station with the network name of ANY is allowed to associate. This object must be saved across a system reset and/or a power cycle." ::= { etsysDot11ExtGeneralEntry 6 } etsysDot11ExtMulticastTxRate OBJECT-TYPE SYNTAX INTEGER { fixed1Mbit(1), fixed2Mbit(2), fixedMediumRate(3), fixedHighRate(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value specifies the Multicast data transmission rate of the AP. It is implemented when cards that operate faster than the 2Mbit 802.11 standard are inserted. This object must be saved across a system reset and/or a power cycle." ::= { etsysDot11ExtGeneralEntry 7 } etsysDot11ExtIntraBSSRelay OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "When this mode is enabled the AP entity within the PC Card will relay frames to destined for stations associated with it and will NOT forward them to the bridging entity within the AP. When this mode is set to disabled, the AP entity within the PC Card will not relay frames from wireless client(s) to station(s) associated with it, instead forwards frames to the bridging entity within the AP. This object must be saved across a system reset and/or a power cycle." ::= { etsysDot11ExtGeneralEntry 8 } etsysDot11ExtStationName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: The wireless station name sent out as part of the beacon messages. Valid only when a DS card is inserted in the Access Point." ::= { etsysDot11ExtGeneralEntry 9 } -- ---------------------------------------------------------------------------- -- 802.11 Building-to-Building section. -- ---------------------------------------------------------------------------- etsysDot11ExtBldgTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysDot11ExtBldgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the objects required to enable the Access Point to operate in Point-to-MultiPoint mode." ::= { etsysDot11ExtBldg 1 } etsysDot11ExtBldgEntry OBJECT-TYPE SYNTAX EtsysDot11ExtBldgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the Dot11Bldg Table. A collection of objects containing information for activating and using the Access Point in Point-to-MultiPoint mode." INDEX {ifIndex} ::= { etsysDot11ExtBldgTable 1 } EtsysDot11ExtBldgEntry ::= SEQUENCE { etsysDot11ExtBldgRemoteMAC1 MacAddress, etsysDot11ExtBldgRemoteMAC2 MacAddress, etsysDot11ExtBldgRemoteMAC3 MacAddress, etsysDot11ExtBldgRemoteMAC4 MacAddress, etsysDot11ExtBldgRemoteMAC5 MacAddress, etsysDot11ExtBldgRemoteMAC6 MacAddress, etsysDot11ExtBldgMPActivationKey OCTET STRING } etsysDot11ExtBldgRemoteMAC1 OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a system reset and/or a power cycle." ::= { etsysDot11ExtBldgEntry 1 } etsysDot11ExtBldgRemoteMAC2 OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a system reset and/or a power cycle." ::= { etsysDot11ExtBldgEntry 2 } etsysDot11ExtBldgRemoteMAC3 OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a system reset and/or a power cycle." ::= { etsysDot11ExtBldgEntry 3 } etsysDot11ExtBldgRemoteMAC4 OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a system reset and/or a power cycle." ::= { etsysDot11ExtBldgEntry 4 } etsysDot11ExtBldgRemoteMAC5 OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a system reset and/or a power cycle." ::= { etsysDot11ExtBldgEntry 5 } etsysDot11ExtBldgRemoteMAC6 OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address for the remote station participating in a 802.11 Building-to-Building link. This object must be saved across a system reset and/or a power cycle." ::= { etsysDot11ExtBldgEntry 6 } etsysDot11ExtBldgMPActivationKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Point-to-multipoint bridge mode requires an activation key to enable. A valid multipoint activation key must be entered as a string of ACSCII characters translating to the binary HEX value of the key before the Access Point will accept the point-to-multipoint bridge mode setting. Returns SNMP_BAD_VALUE if validation fails. This object must be saved across a system reset and/or a power cycle." ::= { etsysDot11ExtBldgEntry 7 } etsysDot11ExtWEPDefaultKeysTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysDot11ExtWEPDefaultKeysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual table for WEP default keys. This table shall contain the four WEP default secret key values corresponding to the four possible KeyID values. The WEP default secret keys are logically WRITE-ONLY. Attempts to read the entries in this table shall return unsuccessful status and a value of null. The default value of each WEP default key shall be null." REFERENCE "IEEE Std 802.11-1997, 8.3.2" ::= { etsysDot11ExtWEP 1 } etsysDot11ExtWEPDefaultKeysEntry OBJECT-TYPE SYNTAX EtsysDot11ExtWEPDefaultKeysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the WEP Default Keys Table. A collection of objects containing information used to determine if a WEPkey as been defined and if so, the value of the WEPkey." INDEX {ifIndex, dot11WEPDefaultKeyIndex } ::= { etsysDot11ExtWEPDefaultKeysTable 1 } EtsysDot11ExtWEPDefaultKeysEntry ::= SEQUENCE { etsysDot11ExtWEPKeyDefined TruthValue, etsysDot11ExtWEPKeyValue OCTET STRING } etsysDot11ExtWEPKeyDefined OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The state column used for determining if an encryption key is set (true) or not (false), false is the default value." ::= { etsysDot11ExtWEPDefaultKeysEntry 1 } etsysDot11ExtWEPKeyValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5|13)) MAX-ACCESS read-write STATUS current DESCRIPTION "A WEP default secret key value. For 40-bit encryption use 5 printable characters or 10 HEX digits. For 128-bit encryption use 13 printable characters or 26 HEX digits. This object must be saved across a system reset and/or a power cycle." ::= { etsysDot11ExtWEPDefaultKeysEntry 2 } etsysDot11ExtWEPEnhancedTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysDot11ExtWEPEnhancedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual table for WEP default keys. This table shall contain the four WEP default secret key values corresponding to the four possible KeyID values. The WEP default secret keys are logically WRITE-ONLY. Attempts to read the entries in this table shall return unsuccessful status and a value of null. The default value of each WEP default key shall be null." REFERENCE "IEEE Std 802.11-1997, 8.3.2" ::= { etsysDot11ExtWEP 2 } etsysDot11ExtWEPEnhancedEntry OBJECT-TYPE SYNTAX EtsysDot11ExtWEPEnhancedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the WEP Default Keys Table. A collection of objects containing information used to determine if a WEPkey as been defined and if so, the value of the WEPkey." INDEX {ifIndex } ::= { etsysDot11ExtWEPEnhancedTable 1 } EtsysDot11ExtWEPEnhancedEntry ::= SEQUENCE { etsysDot11ExtWEPEnhancedImplemented TruthValue } etsysDot11ExtWEPEnhancedImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates whether the AP is capable of Enhanced Wireless Equivalent Privacy (WEP), using 128-bit keys." ::= { etsysDot11ExtWEPEnhancedEntry 1 } etsysDot11ExtOIDNotInEffectTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysDot11ExtOIDNotInEffectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table will be used to determine which wireless parameters have been modified but are not yet in effect. These parameters will not take effect until a reset has been performed." ::= { etsysDot11ExtEffect 1 } etsysDot11ExtOIDNotInEffectEntry OBJECT-TYPE SYNTAX EtsysDot11ExtOIDNotInEffectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { ifIndex, etsysDot11ExtOIDIndex } ::= { etsysDot11ExtOIDNotInEffectTable 1 } EtsysDot11ExtOIDNotInEffectEntry ::= SEQUENCE { etsysDot11ExtOIDIndex AutonomousType, etsysDot11ExtOIDNotInEffect TruthValue } etsysDot11ExtOIDIndex OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS not-accessible STATUS current DESCRIPTION " This object will keep a list of OIDS" -- Fix this descriptions later ::= { etsysDot11ExtOIDNotInEffectEntry 1 } etsysDot11ExtOIDNotInEffect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " This object specifies if the OID being accesed currently has been changed but is not in effect." -- Fix this descriptions later ::= { etsysDot11ExtOIDNotInEffectEntry 2 } -- ------------------------------------------------------------- -- Conformance Information -- ------------------------------------------------------------- etsysDot11ExtConformance OBJECT IDENTIFIER ::= { etsysDot11ExtMIB 2 } etsysDot11ExtGroups OBJECT IDENTIFIER ::= { etsysDot11ExtConformance 1 } etsysDot11ExtCompliances OBJECT IDENTIFIER ::= { etsysDot11ExtConformance 2 } -- ------------------------------------------------------------- -- Units of conformance -- ------------------------------------------------------------- etsysDot11ExtBaseGroup OBJECT-GROUP OBJECTS { etsysDot11ExtLTRemoteStationMAC, etsysDot11ExtLTRemoteStationName, etsysDot11ExtLTTrigger, etsysDot11ExtLTRemoteContents, etsysDot11ExtSystemScale, etsysDot11ExtSecureAccess, etsysDot11ExtMulticastTxRate, etsysDot11ExtIntraBSSRelay, etsysDot11ExtPCCardType, etsysDot11ExtPCCardVersions, etsysDot11ExtBridgeMode, etsysDot11ExtResetOptions, etsysDot11ExtStationName, etsysDot11ExtBldgRemoteMAC1, etsysDot11ExtBldgRemoteMAC2, etsysDot11ExtBldgRemoteMAC3, etsysDot11ExtBldgRemoteMAC4, etsysDot11ExtBldgRemoteMAC5, etsysDot11ExtBldgRemoteMAC6, etsysDot11ExtBldgMPActivationKey, etsysDot11ExtWEPKeyDefined, etsysDot11ExtWEPKeyValue, etsysDot11ExtWEPEnhancedImplemented, etsysDot11ExtOIDNotInEffect } STATUS current DESCRIPTION "The basic etsysDot11Ext stuff." ::= { etsysDot11ExtGroups 1 } -- ------------------------------------------------------------- -- Compliance statements -- ------------------------------------------------------------- etsysDot11ExtCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that support 802Dot11 extensions." MODULE MANDATORY-GROUPS { etsysDot11ExtBaseGroup } ::= { etsysDot11ExtCompliances 1 } END