AD | Application | AWS | Azure | Cloud | Database | Enterprise | Environmental | Event Log | File System | IoT | IT Service | Network/System | Infra | Performance | Protocol | SaaS | Security | Service Level | Storage | Linux | VMware | VoIP | Web | Wireless | SNMP

Crumbtrail

MonitorTools.com » Technical documentation » SNMP » MIB » Enterasys Networks » ENTERASYS-MULTI-AUTH-MIB

ENTERASYS-MULTI-AUTH-MIB device MIB details by Enterasys Networks

ENTERASYS-MULTI-AUTH-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing ENTERASYS-MULTI-AUTH-MIB.


Vendor: Enterasys Networks
Mib: ENTERASYS-MULTI-AUTH-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools) 
ENTERASYS-MULTI-AUTH-MIB DEFINITIONS ::= BEGIN

--  enterasys-multi-auth-mib.txt
--
--  Part Number:
--
--

--  This module provides authoritative definitions for Enterasys 
--  Networks' simultaneous multiple authentication functionality.

--
--  This module will be extended, as needed.

--  Enterasys Networks reserves the right to make changes in this
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Enterasys Networks
--  to determine whether any such changes have been made.
--
--  In no event shall Enterasys Networks be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Enterasys
--  Networks has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Enterasys Networks grants vendors, end-users, and other interested
--  parties a non-exclusive license to use this Specification in 
--  connection with the management of Enterasys Networks products.

--  Copyright March 2004 Enterasys Networks, Inc.

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE
        FROM SNMPv2-SMI
    Unsigned32, Integer32, Gauge32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, TruthValue, TimeStamp
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    ifIndex
        FROM IF-MIB
    InetAddressType, InetAddress
        FROM INET-ADDRESS-MIB
    StationAddressType, StationAddress
        FROM ENTERASYS-UPN-TC-MIB
    etsysModules
        FROM ENTERASYS-MIB-NAMES;

etsysMultiAuthMIB MODULE-IDENTITY
    LAST-UPDATED "200403101356Z"  -- Wed Mar 10 13:56 GMT 2004
    ORGANIZATION "Enterasys Networks, Inc."
    CONTACT-INFO
        "Postal:  Enterasys Networks
                  50 Minuteman Rd.
                  Andover, MA 01810-1008
                  USA
         Phone:   +1 978 684 1000
         E-mail:  support@enterasys.com
         WWW:     http://www.enterasys.com"
   
    DESCRIPTION
        "This MIB module defines a portion of the SNMP MIB under
         the Enterasys Networks enterprise OID pertaining to 
         configuration of multiple authentication mechanisms
         to be run simultaneously on a device."

    REVISION    "200403101356Z"  -- Wed Mar 10 13:56 GMT 2004
    DESCRIPTION 
        "The initial version of this MIB module."
    ::= { etsysModules 46 } 


-- Textual Conventions

EtsysMultiAuthTypes ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "This convention enumerates the authentication types 
         supported by Enterasys Networks' devices."
    SYNTAX       INTEGER {
                   ieee8021x(1), -- IEEE 802.1X Port-Based Network
                                 -- Access Control
                   pwa(2),       -- Enterasys Port Web Authentication
                   macAuth(3)    -- Enterasys Mac Authentication
                 }

EtsysMultiAuthTypePrecedence ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1d "
    STATUS       current
    DESCRIPTION
        "The precedence by which authentication results will be applied
         to network traffic.  This object will have a maximum size
         equal to the number of enumerations specified by the
         EtsysMultiAuthTypes textual convention.  Each octet in this
         object represents a specific authentication type.  The
         first octet contains the authentication type with the highest
         precedence, the second octet contains the type of the next
         highest precedence, and so forth. For example, a precedence
         from highest to lowest of ieee8021x(1), macAuth(3), pwa(2) would 
         be represented as '010302'H."
    SYNTAX       OCTET STRING (SIZE (0..32))

EtsysMultiAuthStatus ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "The status of authentication for this session.  A value of
         authSuccess(1) means authentication was attempted and succeeded.
         A value of authFailed(2) means authentication was attempted
         and failed for a reason other than communication timing out
         with the authorization server.  A value of authInProgress(3)
         means that the authorization process has been started but
         has not completed yet.  A value of authServerTimeout(4)
         means that the request to the authorization server for this
         session timed out without a reply from the server.  A value
         of authTerminated(5) indicates that the session was active
         or in progress and was subsequently terminated."
    SYNTAX       INTEGER {
                   authSuccess(1),
                   authFailed(2),
                   authInProgress(3),
                   authServerTimeout(4),
                   authTerminated(5)
                 }


-- -------------------------------------------------------------
-- MIB Objects
-- -------------------------------------------------------------

etsysMultiAuthObjects      OBJECT IDENTIFIER 
                           ::= { etsysMultiAuthMIB 1 }

etsysMultiAuthSystem       OBJECT IDENTIFIER 
                           ::= { etsysMultiAuthObjects 1 }

etsysMultiAuthPort         OBJECT IDENTIFIER 
                           ::= { etsysMultiAuthObjects 2 }

etsysMultiAuthStation      OBJECT IDENTIFIER 
                           ::= { etsysMultiAuthObjects 3 }

etsysMultiAuthSession      OBJECT IDENTIFIER 
                           ::= { etsysMultiAuthObjects 4 }

etsysMultiAuthNotification OBJECT IDENTIFIER 
                           ::= { etsysMultiAuthObjects 0 }


-- -------------------------------------------------------------
-- The Multiple Authentication System Group
-- -------------------------------------------------------------

etsysMultiAuthSystemSupportedTypes OBJECT-TYPE
    SYNTAX       BITS {
                   ieee8021x(0),
                   pwa(1),
                   macAuth(2)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "This object specifies that authentication types that the
         device supports.  A bit will be set for each corresponding 
         type that is supported."
    ::= { etsysMultiAuthSystem 1 }

etsysMultiAuthSystemMaxNumUsers OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The maximum number of users the can be actively
         authenticated or have authentications in progress at one
         time in the system."
    ::= { etsysMultiAuthSystem 2 }

etsysMultiAuthSystemCurrentNumUsers OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The current number of users the are actively authenticated, 
         have authentications in progress, or the device is keeping
         authentication termination information for in the system."
    ::= { etsysMultiAuthSystem 3 }

etsysMultiAuthSystemMode OBJECT-TYPE
    SYNTAX       INTEGER {
                   strictIeee8021x(1),
                   etsysMultiAuth(2)
                 }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The value strictIeee8021x(1) will cause the device to 
         authenticate in strict adherence to IEEE Std. 802.1X-2001.  
         In this mode no other authentication mechanisms will be active.
         While in this mode, changes may be made to other objects in the
         MIB, but they will have no effect on the operation of the device 
         until such time as the system mode is changed to etsysMultiAuth(2).
         A set of this object to a value of etsysMultiAuth(2) will cause 
         the device to authenticate using multiple authenticators 
         simultaneously."
    REFERENCE 
        "IEEE Std. 802.1X-2001"
    DEFVAL       { strictIeee8021x }
    ::= { etsysMultiAuthSystem 4 }

etsysMultiAuthSystemDefaultPrecedence OBJECT-TYPE
    SYNTAX       EtsysMultiAuthTypePrecedence
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The precedence that authentication results will be applied
         to network traffic by default.  This object will have a size
         equal to the number of enumerations specified by the
         EtsysMultiAuthTypes textual convention."
    DEFVAL       { '030102'H }
    ::= { etsysMultiAuthSystem 5 }

etsysMultiAuthSystemAdminPrecedence OBJECT-TYPE
    SYNTAX       EtsysMultiAuthTypePrecedence
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "This object allows one to modify the default precedence by 
         which authentication results will be applied to network traffic.

         Sets to this object are not required to specify all of the types 
         that the device supports.  If less types are specified than are 
         supported, then all types that were not specified will be given 
         an operational precedence based on that type's default precedence 
         relative to the last type specified.  For example, if the default 
         precedence is '030102'H and the object is set to '02'H then 
         operational precedence would be '020301'H.

         A set to this object of a zero length octet string will clear
         the administrative precedence.  In this case the operational
         precedence would be equal to the default precedence."
    DEFVAL       { ''H }
    ::= { etsysMultiAuthSystem 6 }

etsysMultiAuthSystemOperPrecedence OBJECT-TYPE
    SYNTAX       EtsysMultiAuthTypePrecedence
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "This object returns the operational precedence of authentication 
         types as they will be applied to network traffic.  The value 
         returned by this object is the calculated result of the 
         etsysMultiAuthSystemDefaultPrecedence and 
         etsysMultiAuthSystemAdminPrecedence objects.  This object will 
         have a size equal to the number of enumerations specified by the
         EtsysMultiAuthTypes textual convention."
    ::= { etsysMultiAuthSystem 7 }


-- -------------------------------------------------------------
-- The Multiple Authentication Port Group
-- -------------------------------------------------------------

etsysMultiAuthPortTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF EtsysMultiAuthPortEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "A table of per port information and configuration for user
         authentication."
    ::= {  etsysMultiAuthPort 1 }

etsysMultiAuthPortEntry OBJECT-TYPE
    SYNTAX       EtsysMultiAuthPortEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry containing per port authentication data. 
         Only interfaces that are able to authenticate users are 
         represented in this table."
    INDEX  { ifIndex }
    ::= { etsysMultiAuthPortTable 1 }

EtsysMultiAuthPortEntry ::=
    SEQUENCE { 
        etsysMultiAuthPortMode
            INTEGER,
        etsysMultiAuthPortMaxNumUsers
            Unsigned32,
        etsysMultiAuthPortNumUsersAllowed
            Unsigned32,
        etsysMultiAuthPortCurrentNumUsers
            Gauge32,
        etsysMultiAuthPortClearUsers
            TruthValue,
        etsysMultiAuthPortTrapEnable
            BITS
    }

etsysMultiAuthPortMode OBJECT-TYPE
    SYNTAX       INTEGER {
                   forceUnauthorized(1),
                   forceAuthorized(2),
                   authOptional(3),
                   authRequired(4)
                 }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "This object specifies the authorization mode to use for
         packets received on this interface.  

         A value of forceUnauthorized(1) indicates that the interface 
         is always unauthenticated.  
 
         A value of forceAuthorized(2) indicates that users on this port 
         will always be considered to be authenticated.  

         A value of authOptional(3) indicates that authentication is 
         optional on this interface.  Packets received from 
         unauthenticated users on the interface will be processed using 
         the static configuration of the interface.  Users may promote
         the policy applied to their traffic by actively authenticating
         on this interface.

         A value of authRequired(4) indicates that all packets received on 
         the interface will be dropped until authentication succeeds.  Some
         authentication types, such as PWA, will not be fully functional in 
         this mode of operation."
    ::= { etsysMultiAuthPortEntry 1 }

etsysMultiAuthPortMaxNumUsers OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The maximum number of users that can be actively
         authenticated or have authentications in progress at one
         time on this interface."
    ::= { etsysMultiAuthPortEntry 2 }

etsysMultiAuthPortNumUsersAllowed OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The user configured number of users that can be actively
         authenticated or have authentications in progress at one
         time on this interface.  This object has a default value 
         equal to the value of etsysMultiAuthPortMaxNumUsers for this
         interface.  If the value set to this object is less than its 
         current value, it will have the same effect as setting the 
         etsysMultiAuthPortClearUsers object to a value of true(1)."
    ::= { etsysMultiAuthPortEntry 3 }

etsysMultiAuthPortCurrentNumUsers OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The current number of users that are actively
         authenticated or have authentications in progress at one
         time on this interface.  By definition this value can not
         exceed the value specified by etsysMultiAuthPortMaxNumUsers 
         for the same interface."
    ::= { etsysMultiAuthPortEntry 4 } 

 etsysMultiAuthPortClearUsers OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Setting this object to a value of true(1) will cause
         all users that are currently authenticated or that 
         have authentications in progress on this interface to become
         unauthenticated.  This will cause any such entries with matching 
         ifIndex values in the etsysMultiAuthSessionStationTable tables to 
         change their authorization status to authTerminated(5).

         Setting this object to a value of false(2) has no effect.  This
         object will always return a value of false(2)."
    DEFVAL       { false }
    ::= { etsysMultiAuthPortEntry 5 }

etsysMultiAuthPortTrapEnable OBJECT-TYPE
    SYNTAX       BITS {
                   authSuccessTrap(0),
                   authFailedTrap(1),
                   authTerminatedTrap(2),
                   maxNumUsersReachedTrap(3)
                 }                       
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "This object allows for the enabling or disabling of each
         trap on a per interface basis.  Setting a given bit to a value
         of 1 allows traps of that type to be sent for events on that
         interface.  Setting a given bit to a value of 0 disallows traps 
         of that type to be sent for events on that interface.  The 
         individual bits correlate to specific traps as follows:

               BIT                        NOTIFICATION
         ----------------------------------------------------------------
         authSuccessTrap(0)           etsysMultiAuthSuccess
         authFailedTrap(1)            etsysMultiAuthFailed
         authTerminatedTrap(2)        etsysMultiAuthTerminated
         maxNumUsersReachedTrap(3)    etsysMultiAuthMaxNumUsersReached 
        "
    DEFVAL       { { } }
    ::= { etsysMultiAuthPortEntry 6 }


-- -------------------------------------------------------------
-- The Multiple Authentication Station Group
-- -------------------------------------------------------------

etsysMultiAuthStationTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF EtsysMultiAuthStationEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "A table of station configuration on specific interfaces."
    ::= {  etsysMultiAuthStation 1 }

etsysMultiAuthStationEntry OBJECT-TYPE
    SYNTAX       EtsysMultiAuthStationEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry containing authentication information on a per station, 
         per port basis.  Only interfaces that are able to authenticate 
         users are represented in this table."
    INDEX  { etsysMultiAuthStationAddrType,
             etsysMultiAuthStationAddr,
             ifIndex }
    ::= { etsysMultiAuthStationTable 1 }

EtsysMultiAuthStationEntry ::=
    SEQUENCE { 
        etsysMultiAuthStationAddrType
            StationAddressType,
        etsysMultiAuthStationAddr
            StationAddress,
        etsysMultiAuthStationClearUsers
            TruthValue
    }

etsysMultiAuthStationAddrType OBJECT-TYPE
    SYNTAX       StationAddressType
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
        "The type of station represented by etsysMultiAuthStationAddr."
    ::= { etsysMultiAuthStationEntry 1 }

etsysMultiAuthStationAddr OBJECT-TYPE
    SYNTAX       StationAddress
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
        "The station address for the authenticated user."
    ::= { etsysMultiAuthStationEntry 2 }

etsysMultiAuthStationClearUsers OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Setting this object to a value of true(1) will cause
         any users with the specified station address that are currently 
         authenticated or that have authentications in progress to become 
         unauthenticated.  This will cause any entries with matching 
         etsysMultiAuthStationAddr values in the
         etsysMultiAuthSessionStationTable tables to change their 
         authorization status to authTerminated(5).

         Setting this object to a value of false(2) has no effect.  This
         object will always return a value of false(2)."
    DEFVAL       { false }
    ::= { etsysMultiAuthStationEntry 3 }


-- -------------------------------------------------------------
-- The Multiple Authentication Session Group
-- -------------------------------------------------------------

etsysMultiAuthSessionStationTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF EtsysMultiAuthSessionStationEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "A table of session information and configuration for user
         authentication.  Entries in this table represent users 
         in various stages of authentication.  Entries that do
         not have a etsysMultiAuthSessionStationAuthStatus value
         of authSuccess(1) or authInProgress(3) MAY be removed
         by the agent as required in order to free resources for
         new user authentications."
    ::= {  etsysMultiAuthSession 1 }

etsysMultiAuthSessionStationEntry OBJECT-TYPE
    SYNTAX       EtsysMultiAuthSessionStationEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry containing authentication information on a per station, 
         per port, per authentication agent type basis.  Only interfaces
         that are able to authenticate users are represented in this table."
    INDEX  { etsysMultiAuthStationAddrType,
             etsysMultiAuthStationAddr,
             ifIndex, 
             etsysMultiAuthSessionAgentType }
    ::= { etsysMultiAuthSessionStationTable 1 }

EtsysMultiAuthSessionStationEntry ::=
    SEQUENCE { 
        etsysMultiAuthSessionAgentType
            EtsysMultiAuthTypes,
        etsysMultiAuthSessionStationAuthStatus
            EtsysMultiAuthStatus,
        etsysMultiAuthSessionAuthAttemptTime
            TimeStamp,
        etsysMultiAuthSessionAuthServerType
            INTEGER,
        etsysMultiAuthSessionAuthServerAddrType
            InetAddressType,
        etsysMultiAuthSessionAuthServerAddr
            InetAddress, 
        etsysMultiAuthSessionPolicyIndex
            Integer32,
        etsysMultiAuthSessionIsApplied
            TruthValue
    }

etsysMultiAuthSessionAgentType OBJECT-TYPE
    SYNTAX       EtsysMultiAuthTypes
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
        "The type of authentication agent for this session."
    ::= { etsysMultiAuthSessionStationEntry 1 }

etsysMultiAuthSessionStationAuthStatus OBJECT-TYPE
    SYNTAX       EtsysMultiAuthStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The status of authentication for this session."
    ::= { etsysMultiAuthSessionStationEntry 2 }

etsysMultiAuthSessionAuthAttemptTime OBJECT-TYPE
    SYNTAX       TimeStamp
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The value of sysUpTime when this session last attempted 
         authorization.  For entries that have a value of 
         authInProgress(3) for etsysMultiAuthSessionAuthStatus
         this object may return a value of zero."
    ::= { etsysMultiAuthSessionStationEntry 3 }

etsysMultiAuthSessionAuthServerType OBJECT-TYPE
    SYNTAX       INTEGER {
                   radius(1)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The type of authentication server used to authenticate this
         session."
    ::= { etsysMultiAuthSessionStationEntry 4 }

etsysMultiAuthSessionAuthServerAddrType OBJECT-TYPE
    SYNTAX       InetAddressType 
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The type of data returned by etsysMultiAuthSessionAuthServerAddr."
    ::= { etsysMultiAuthSessionStationEntry 5 }

etsysMultiAuthSessionAuthServerAddr OBJECT-TYPE
    SYNTAX       InetAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The network address of the authentication server for this 
         session."
    ::= { etsysMultiAuthSessionStationEntry 6 }

etsysMultiAuthSessionPolicyIndex OBJECT-TYPE
    SYNTAX       Integer32 (0|1..65535)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The Policy Profile Index returned from the authentication
         server for this session.  

         The value of zero indicates that no policy will be applied 
         for this session.  If the etsysMultiAuthSessionAuthStatus 
         object returns a value of authSuccess(1), then a value of 
         zero is the result of the policy not being configured on the 
         authorization server.  For all other values of 
         etsysMultiAuthSessionAuthStatus a value of zero for this object
         is the result of authorization not succeeding or not having 
         completed.  

         All values other than zero are valid Policy Profile 
         Indexes that specify the policy profile the user will receive on
         this interface.  If a given user has been authenticated by
         multiple authentication types on the same interface the policy 
         that is applied to the user's packets is determined by the 
         precedence of the agents as specified by 
         etsysMultiAuthSystemOperPrecedence.  These indexes are suitable 
         for indexing in the ENTERASYS-POLICY-PROFILE-MIB."
    ::= { etsysMultiAuthSessionStationEntry 7 }

etsysMultiAuthSessionIsApplied OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "This object indicates whether this entry and the
         policy index contained within it are actively being applied
         to traffic matching the interface and station address of this
         entry.  A value of true(1) indicates that this entry is being
         applied.  A value of false(2) indicates that the entry is not 
         being applied.  Only one authentication type per
         interface station address ordered pair may be applied at a
         single time.  The operational precedence of the various
         authentication types determines which if any type will be 
         applied."
    ::= { etsysMultiAuthSessionStationEntry 8 }

etsysMultiAuthSessionPortTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF EtsysMultiAuthSessionPortEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "A table of session information and configuration for user
         authentication.  This table represents the information 
         specified in the etsysMultiAuthSessionStationTable with 
         alternate indexing for faster lookups of data on per port
         basis."
    ::= {  etsysMultiAuthSession 2 }

etsysMultiAuthSessionPortEntry OBJECT-TYPE
    SYNTAX       EtsysMultiAuthSessionPortEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry containing authentication information on a per port, 
         per station, per authentication agent type basis.  Only interfaces
         that are able to authenticate users are represented in this table."
    INDEX  { ifIndex,
             etsysMultiAuthStationAddrType,
             etsysMultiAuthStationAddr,
             etsysMultiAuthSessionAgentType }
    ::= { etsysMultiAuthSessionPortTable 1 }

EtsysMultiAuthSessionPortEntry ::=
    SEQUENCE { 
        etsysMultiAuthSessionPortAuthStatus
            EtsysMultiAuthStatus
    }

etsysMultiAuthSessionPortAuthStatus OBJECT-TYPE
    SYNTAX       EtsysMultiAuthStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The status of authentication for this session."
    ::= { etsysMultiAuthSessionPortEntry 1 }


-- -------------------------------------------------------------
-- The Multiple Authentication Notification Group
-- -------------------------------------------------------------

etsysMultiAuthSuccess NOTIFICATION-TYPE
    OBJECTS { etsysMultiAuthStationAddrType, etsysMultiAuthStationAddr, 
              ifIndex, etsysMultiAuthSessionAgentType }
    STATUS  current
    DESCRIPTION
        "An etsysMultiAuthSuccess trap signifies that the SNMP entity, 
         acting in an agent role, has successfully authenticated a 
         station on one of its interfaces.  The included objects
         of etsysMultiAuthStationAddrType and etsysMultiAuthStationAddr
         uniquely identify the station that has been authenticated.
         The interface that the station was authenticated on is
         specified by the ifIndex object, and the type of authentication
         used is to authenticate the station is specified by the 
         etsysMultiAuthSessionAgentType object.  This trap will only
         be generated on interfaces that are in the authOptional(3)
         or authRequired(4) state."
    ::= { etsysMultiAuthNotification 1 }

etsysMultiAuthFailed NOTIFICATION-TYPE
    OBJECTS { etsysMultiAuthStationAddrType, etsysMultiAuthStationAddr,
              ifIndex, etsysMultiAuthSessionAgentType }
    STATUS  current
    DESCRIPTION
        "An etsysMultiAuthFailed trap signifies that the SNMP entity, 
         acting in an agent role, has identified a station that attempted
         and subsequently failed to authenticate on one of its interfaces.
         The included objects of etsysMultiAuthStationAddrType and 
         etsysMultiAuthStationAddr uniquely identify the station that 
         attempted to authenticate.  The interface that the station 
         attempted to authenticate on is specified by the ifIndex object, 
         and the type of authentication attempted is specified by the 
         etsysMultiAuthSessionAgentType object.  This trap will only
         be generated on interfaces that are in the authOptional(3)
         or authRequired(4) state."
    ::= { etsysMultiAuthNotification 2 }

etsysMultiAuthTerminated NOTIFICATION-TYPE
    OBJECTS { etsysMultiAuthStationAddrType, etsysMultiAuthStationAddr,
              ifIndex, etsysMultiAuthSessionAgentType }
    STATUS  current
    DESCRIPTION
        "An etsysMultiAuthTerminated trap signifies that the SNMP entity,  
         acting in an agent role, has terminated the authentication of a 
         station on one of its interfaces.  The included objects
         of etsysMultiAuthStationAddrType and etsysMultiAuthStationAddr
         uniquely identify the station for which  authentication was 
         terminated.  The interface that the station was previously 
         authenticated on is specified by the ifIndex object, and the 
         type of authentication that the station was terminated for is
         specified by the etsysMultiAuthSessionAgentType object.  This 
         trap will only be generated on interfaces that are in the 
         authOptional(3) or authRequired(4) state."
    ::= { etsysMultiAuthNotification 3 }

etsysMultiAuthMaxNumUsersReached NOTIFICATION-TYPE
    OBJECTS { ifIndex }
    STATUS  current
    DESCRIPTION
        "An etsysMultiAuthMaxNumUsersReached trap signifies that the SNMP 
         entity, acting in an agent role, has an interface where 
         subsequent to a successful authentication, the number of current
         sessions on the interface equals the maximum number of sessions 
         allowed for that interface.  The interface that the maximum 
         number of sessions has been reached is specified by the ifIndex 
         object."
    ::= { etsysMultiAuthNotification 4 }


-- -------------------------------------------------------------
-- Conformance Information
-- -------------------------------------------------------------

etsysMultiAuthConformance OBJECT IDENTIFIER ::= { etsysMultiAuthMIB 2 }

etsysMultiAuthGroups      OBJECT IDENTIFIER ::= { etsysMultiAuthConformance 1 }
etsysMultiAuthCompliances OBJECT IDENTIFIER ::= { etsysMultiAuthConformance 2 }


-- -------------------------------------------------------------
-- Units of conformance
-- -------------------------------------------------------------

etsysMultiAuthSystemGroup OBJECT-GROUP
    OBJECTS {
        etsysMultiAuthSystemSupportedTypes,
        etsysMultiAuthSystemMaxNumUsers,
        etsysMultiAuthSystemCurrentNumUsers,
        etsysMultiAuthSystemMode,
        etsysMultiAuthSystemDefaultPrecedence,
        etsysMultiAuthSystemAdminPrecedence,
        etsysMultiAuthSystemOperPrecedence
    }
    STATUS     current
    DESCRIPTION
        "The system group for all devices supporting Multiple 
         Authentication."
    ::= { etsysMultiAuthGroups 1 }

etsysMultiAuthPortBaseGroup OBJECT-GROUP
    OBJECTS {
        etsysMultiAuthPortMode,
        etsysMultiAuthPortMaxNumUsers,
        etsysMultiAuthPortNumUsersAllowed,
        etsysMultiAuthPortCurrentNumUsers,
        etsysMultiAuthPortClearUsers
    }
    STATUS     current
    DESCRIPTION
        "The base level port group for all devices supporting Multiple 
         Authentication."
    ::= { etsysMultiAuthGroups 2 }

etsysMultiAuthPortTrapGroup OBJECT-GROUP
    OBJECTS { etsysMultiAuthPortTrapEnable }
    STATUS     current
    DESCRIPTION
        "This group of objects for all devices supporting per interface 
         SNMP notifications."
    ::= { etsysMultiAuthGroups 3 }

etsysMultiAuthStationGroup OBJECT-GROUP
    OBJECTS {
        etsysMultiAuthStationAddrType,
        etsysMultiAuthStationAddr,
        etsysMultiAuthStationClearUsers
    }
    STATUS     current
    DESCRIPTION
        "The station group for all devices supporting Multiple
         Authentication."
    ::= { etsysMultiAuthGroups 4 }

etsysMultiAuthSessionGroup OBJECT-GROUP
    OBJECTS {
        etsysMultiAuthSessionAgentType,
        etsysMultiAuthSessionStationAuthStatus,
        etsysMultiAuthSessionAuthAttemptTime,
        etsysMultiAuthSessionAuthServerType,
        etsysMultiAuthSessionAuthServerAddrType,
        etsysMultiAuthSessionAuthServerAddr,
        etsysMultiAuthSessionPolicyIndex,
        etsysMultiAuthSessionIsApplied,
        etsysMultiAuthSessionPortAuthStatus
    }
    STATUS     current
    DESCRIPTION
        "The session group for all devices supporting Multiple
         Authentication."
    ::= { etsysMultiAuthGroups 5 }

etsysMultiAuthNotificationPortGroup NOTIFICATION-GROUP
    NOTIFICATIONS { 
        etsysMultiAuthSuccess,  
        etsysMultiAuthFailed,
        etsysMultiAuthTerminated,
        etsysMultiAuthMaxNumUsersReached
    }
    STATUS  current
    DESCRIPTION
        "The group of per interface notifications for Multiple 
         Authentication."
    ::= { etsysMultiAuthGroups 6 }


-- -------------------------------------------------------------
-- Compliance statements
-- -------------------------------------------------------------

etsysMultiAuthCompliance MODULE-COMPLIANCE
    STATUS     current
    DESCRIPTION
        "The compliance statement for devices that support Multiple
         Authentication."

    MODULE
        MANDATORY-GROUPS { 
            etsysMultiAuthSystemGroup,
            etsysMultiAuthPortBaseGroup,
            etsysMultiAuthStationGroup,
            etsysMultiAuthSessionGroup
        }

        GROUP       etsysMultiAuthPortTrapGroup
        DESCRIPTION
            "This group is mandatory for all devices that support per
             interface notifications for Multiple Authentication."

        GROUP       etsysMultiAuthNotificationPortGroup
        DESCRIPTION
            "This group is mandatory for all devices that support per
             interface notifications for Multiple Authentication."

        OBJECT      etsysMultiAuthSystemAdminPrecedence
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT      etsysMultiAuthPortNumUsersAllowed
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT      etsysMultiAuthPortClearUsers
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT      etsysMultiAuthStationClearUsers
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."

    ::= { etsysMultiAuthCompliances 1 }

END