HPNSATRAPCFG-MIB device MIB details by Hewlett Packard
HPNSATRAPCFG-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing HPNSATRAPCFG-MIB.
Vendor: | Hewlett Packard |
---|---|
Mib: | HPNSATRAPCFG-MIB [download] |
Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- **************************************************************************** -- HP NSA Trap Configuration Information MIB -- August 1, 1995 -- -- Copyright Hewlett-Packard Company 1994-1995 -- All rights reserved. -- -- The information in this document is subject to change without notice. -- -- The HP enterprise number is 11. The ASN.1 prefix to, and including, -- the HP enterprise ID is 1.3.6.1.4.1.11. -- -- **************************************************************************** -- Summary of objects in the HP NSA Trap Config Information MIB -- **************************************************************************** -- hp (1.3.6.1.4.1.11) -- nm (hp.2) -- hpnsa (nm.23) -- hpnsaTrapCfg Group (hpnsa.13) -- hpnsaTrapCfgMibRev Group (hpnsa.13.1) -- hpnsaTrapCfgMibRevMajor (hpnsa.13.1.1) -- hpnsaTrapCfgMibRevMinor (hpnsa.13.1.2) -- hpnsaTrapCfgAgent Group (hpnsa.13.2) -- hpnsaTrapCfgAgentTable (hpnsa.13.2.1) -- hpnsaTrapCfgAgentEntry (hpnsa.13.2.1.1) -- hpnsaTrapCfgAgentIndex (hpnsa.13.2.1.1.1) -- hpnsaTrapCfgAgentName (hpnsa.13.2.1.1.2) -- hpnsaTrapCfgAgentVersion(hpnsa.13.2.1.1.3) -- hpnsaTrapCfgAgentDate (hpnsa.13.2.1.1.4) -- hpnsaTrapTargetCfg Group (hpnsa.13.3) -- hpnsaRemoveTrapTarget (hpnsa.13.3.1) -- hpnsaAddTrapTarget (hpnsa.13.3.2) -- hpnsaRestartSNMP (hpnsa.13.3.3) -- -- -- **************************************************************************** HPNSATRAPCFG-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; hp OBJECT IDENTIFIER ::= { enterprises 11 } nm OBJECT IDENTIFIER ::= { hp 2 } hpnsa OBJECT IDENTIFIER ::= { nm 23 } hpnsaTrapCfg OBJECT IDENTIFIER ::= { hpnsa 13 } hpnsaTrapCfgMibRev OBJECT IDENTIFIER ::= { hpnsaTrapCfg 1 } hpnsaTrapCfgAgent OBJECT IDENTIFIER ::= { hpnsaTrapCfg 2 } hpnsaTrapTargetCfg OBJECT IDENTIFIER ::= { hpnsaTrapCfg 3 } -- **************************************************************************** -- HP NSA Trap Configuration Information MIB Revision -- =================================== -- -- hp (1.3.6.1.4.1.11) -- nm (hp.2) -- hpnsa (nm.23) -- hpnsaTrapCfg Group (hpnsa.13) -- hpnsaTrapCfgMibRev Group (hpnsa.13.1) -- hpnsaTrapCfgMibRevMajor (hpnsa.13.1.1) -- hpnsaTrapCfgMibRevMinor (hpnsa.13.1.2) -- -- Implementation of the MibRev group is mandatory for all HPNSA Agents -- supporting the HP Trap Configuration Information MIB. -- -- An HPNSA Agent conforming to this document will return a -- hpnsaTrapCfgMibRevMajor of 1 and a hpnsaTrapCfgMibRevMinor of 0. -- -- **************************************************************************** hpnsaTrapCfgMibRevMajor OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The major revision level of the MIB." ::= { hpnsaTrapCfgMibRev 1 } hpnsaTrapCfgMibRevMinor OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The minor revision level of the MIB." ::= { hpnsaTrapCfgMibRev 2 } -- **************************************************************************** -- HP NSA Trap Config Info MIB Agent Information -- ===================================== -- -- hp (1.3.6.1.4.1.11) -- nm (hp.2) -- hpnsa (nm.23) -- hpnsaTrapCfg Group (hpnsa.13) -- hpnsaTrapCfgAgent Group (hpnsa.13.2) -- hpnsaTrapCfgAgentTable (hpnsa.13.2.1) -- hpnsaTrapCfgAgentEntry (hpnsa.13.2.1.1) -- hpnsaTrapCfgAgentIndex (hpnsa.13.2.1.1.1) -- hpnsaTrapCfgAgentName (hpnsa.13.2.1.1.2) -- hpnsaTrapCfgAgentVersion(hpnsa.13.2.1.1.3) -- hpnsaTrapCfgAgentDate (hpnsa.13.2.1.1.4) -- -- Implementation of the Trap Config Info Agent group is mandatory for all -- HPNSA Agents supporting the HP Trap Config Information MIB. -- -- **************************************************************************** hpnsaTrapCfgAgentTable OBJECT-TYPE SYNTAX SEQUENCE OF HPnsaTrapCfgAgentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of SNMP agents that satisfy requests for this MIB." ::= { hpnsaTrapCfgAgent 1 } hpnsaTrapCfgAgentEntry OBJECT-TYPE SYNTAX HPnsaTrapCfgAgentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A description of the agent/agents that access Trap Config. information." INDEX { hpnsaTrapCfgAgentIndex } ::= { hpnsaTrapCfgAgentTable 1 } HPnsaTrapCfgAgentEntry ::= SEQUENCE { hpnsaTrapCfgAgentIndex INTEGER, hpnsaTrapCfgAgentName DisplayString, hpnsaTrapCfgAgentVersion DisplayString, hpnsaTrapCfgAgentDate OCTET STRING } hpnsaTrapCfgAgentIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "A unique index for this agent." ::= { hpnsaTrapCfgAgentEntry 1 } hpnsaTrapCfgAgentName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of the agent/agents satisfying SNMP requests for this MIB." ::= { hpnsaTrapCfgAgentEntry 2 } hpnsaTrapCfgAgentVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Version number of the agent/agents satisfying SNMP requests for this MIB." ::= { hpnsaTrapCfgAgentEntry 3 } hpnsaTrapCfgAgentDate OBJECT-TYPE SYNTAX OCTET STRING (SIZE (7)) ACCESS read-only STATUS mandatory DESCRIPTION "The date on which this agent was created. field octets contents range _________________________________________________ 1 1 years since 1900 0..255 2 2 month 1..12 3 3 day 1..31 4 4 hour 0..23 5 5 minute 0..59 6 6 second 0..59" ::= { hpnsaTrapCfgAgentEntry 4 } -- **************************************************************************** -- HP NSA Trap Target Configuration Information -- =================================== -- -- hp (1.3.6.1.4.1.11) -- nm (hp.2) -- hpnsa (nm.23) -- hpnsaTrapCfg Group (hpnsa.13) -- hpnsaTrapTargetCfg Group (hpnsa.13.3) -- hpnsaRemoveTrapTarget (hpnsa.13.3.1) -- hpnsaAddTrapTarget (hpnsa.13.3.2) -- hpnsaRestartSNMP (hpnsa.13.3.3) -- -- Implementation of this group is mandatory for all HPNSA Agents -- supporting the HP Trap Configuration Information MIB. -- -- **************************************************************************** hpnsaRemoveTrapTarget OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-write STATUS mandatory DESCRIPTION "An SNMP Set request on this object will cause the agent to remove the specified network address from server's SNMP trap destinations list" ::= { hpnsaTrapTargetCfg 1 } hpnsaAddTrapTarget OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-write STATUS mandatory DESCRIPTION "An SNMP Set request on this object will cause the agent to add the specified network address to server's SNMP trap destination list" ::= { hpnsaTrapTargetCfg 2 } hpnsaRestartSNMP OBJECT-TYPE SYNTAX INTEGER { noActionNeeded(1), restartSNMP(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Returns whether or not the SNMP service needs to be restarted in order for changes to SNMP trap destination list to take effect" ::= { hpnsaTrapTargetCfg 3 } END