LMS-TRAP-FORWARDING-MIB device MIB details by Lotus Development Corp
LMS-TRAP-FORWARDING-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing LMS-TRAP-FORWARDING-MIB.
Vendor: | Lotus Development Corp |
---|---|
Mib: | LMS-TRAP-FORWARDING-MIB [download] |
Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
LMS-TRAP-FORWARDING-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, enterprises, Counter, Gauge, TimeTicks, NetworkAddress FROM RFC1155-SMI DisplayString FROM RFC1213-MIB; -- OBJECT IDENTIFIERS lotus OBJECT IDENTIFIER ::= { enterprises 334 } notes OBJECT IDENTIFIER ::= { lotus 1 } lcs OBJECT IDENTIFIER ::= { lotus 2 } softswitch OBJECT IDENTIFIER ::= { lotus 3 } common-mibs OBJECT IDENTIFIER ::= { softswitch 1 } lms OBJECT IDENTIFIER ::= { softswitch 2 } lmsTrapData OBJECT IDENTIFIER ::= { lms 3 } -- comment this out if using the MODULE-IDENTITY macro lmsTrap OBJECT IDENTIFIER ::= { lms 2 } TimeInterval ::= INTEGER (0..2147483647) -- MODULE IDENTIFICATION use in V2 version only --lmsTrap MODULE-IDENTITY -- LAST-UPDATED "9511280000Z" -- ORGANIZATION "Lotus Development Corporation" -- CONTACT-INFO -- " Bruce Ernst -- Postal: Lotus Development Corporation -- 640 Lee Road , Suite 200 -- Chesterbrook Corporate Center -- Wayne, PA 19087 -- US -- -- Tel: +1 610 251 3404 -- Fax: +1 610 251 3550 -- E-Mail: bge@softsw.ssw.com" -- DESCRIPTION -- "The MIB module describing LMS traps and trap forwarding controls -- Version 1 - first cut - outline only. 8/30/95 -- Version 1.1 - minor updates and typo corrections 9/6/95 -- Version 1.2 - Added traps for each severity of LMS event -- " -- ::= { lms 2 } -- TRAP CONTROL/ADMINISTRATION VARIABLES: eventFwdTableModificationStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), no-access(2), read-only(3), read-modify(4), read-create(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the combination of possible functions allowed on the lmsEventFwdTable table, subject to overriding SNMP security attributes and the ACCESS clause restrictions on the objects themselves. The values are: unknown - Managers privileges are unknown. no-access - Managers may neither read nor write to this table. read-only - Managers may only read the table, they cannot add or delete conceptual rows and cannot change the value of any variable, even those with ACCESS of 'read-write'. read-modify - Managers may read the table, and change the value of variables whose ACCESS is 'read-write'. read-create - Managers may read the table, change the value of variables whose ACCESS is 'read-write', and create or delete conceptual rows in the table." ::= { lmsTrap 1 } nextFwdEntryIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index that may be used by a manager on a 'set-request' PDU to create a new conceptual row in the lmsEventFwdTable table." ::= { lmsTrap 2 } trapWindowTime OBJECT-TYPE SYNTAX TimeInterval ACCESS read-write STATUS mandatory DESCRIPTION "A control time window, expresses in 1/100ths of a second, used in conjunction with the maxTrapsPerWindow variable to prevent a 'trap storm' caused by a rapidly recurring error condition ." ::= { lmsTrap 3 } maxTrapsPerWindow OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of traps to be forwarded in the time interval expressed in the trapWindowTime variable. Used to prevent a 'trap storm' caused by a rapidly recurring error condition." ::= { lmsTrap 4 } numDroppedMaxPerWindowTraps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of traps intended for this destination, which were not forwarded due to the maxTrapsPerWindow count being met or exceeded." ::= { lmsTrap 5 } lmsEventFwdTable OBJECT-TYPE SYNTAX SEQUENCE OF LMSEventFwdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table holding information to control/administer forwarding of LMS events to SNMP-based management stations or applications." ::= { lmsTrap 6 } lmsEventFwdEntry OBJECT-TYPE SYNTAX LMSEventFwdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry associated with each destination to which LMS events should be forwarded as SNMP traps." INDEX {fwdEntryIndex} ::= {lmsEventFwdTable 1} LMSEventFwdEntry ::= SEQUENCE { fwdEntryIndex INTEGER, rowStatus INTEGER, destinationNetAddr NetworkAddress, destinationCommunity DisplayString, destinationPort INTEGER, forwardingEnabled INTEGER, forwardingFilterName DisplayString, lastTrapSequenceNumber INTEGER, lastTrapTime TimeTicks, numDroppedDisabledTraps Counter } fwdEntryIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The integer index into the lmsEventFwdTable table." ::= { lmsEventFwdEntry 1 } rowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the conceptual row. These are mapped to the same values as the RowStatus textual conversion in SNMPv2 and carry the same semantics." ::= { lmsEventFwdEntry 2 } destinationNetAddr OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "The network address of the destination entity for trap forwarding." ::= { lmsEventFwdEntry 3 } destinationCommunity OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The community name to be used when sending traps to the destination entity. This variable is non-defined in SNMPv2 implementions." ::= { lmsEventFwdEntry 4 } destinationPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The UDP port at the 'destinationNetAddr' to which the trap should be sent." ::= { lmsEventFwdEntry 5 } forwardingEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether forwarding is enabled for this destination at the present time. Used to temporarily suspend forwarding." ::= { lmsEventFwdEntry 6 } forwardingFilterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Undefined at the present time - bge." ::= { lmsEventFwdEntry 7 } lastTrapSequenceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The sequence number of the last trap sent to this destination. All traps sent to a given destination are sequenced via a 32-bit, wrapping counter. A manager may use this variable to determine if any traps for this destination have been 'lost'." ::= { lmsEventFwdEntry 8 } lastTrapTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime as included in the last trap sent to this destination." ::= { lmsEventFwdEntry 9 } numDroppedDisabledTraps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of traps intended for this destination, which were not forwarded due to the variable forwardingEnabled begin set to disabled(2)." ::= { lmsEventFwdEntry 10 } -- MOST RECENT TRAP VARIABLES: lmsEvComponentType OBJECT-TYPE SYNTAX INTEGER { global(1), switch(2), core(3), mta(4), mta-group(5), queue(6), mea(7), other(8) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Identifies the type of LMS component issuing the event." ::= { lmsTrapData 1 } lmsEvComponentDN OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "Identifies the most unique (rightmost) portion of the Spyder Distinguished Name of the component issuing the event. The combination of lmsEvComponentType and lmsEvComponentDN MUST uniquely identify the issuing component." ::= { lmsTrapData 2 } lmsEvDbId OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Identifies the unique key used to identify this event in the LMS event database." ::= { lmsTrapData 3 } lmsEvOID OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Identifies the specific LMS event OID conatined in the LMS event." ::= { lmsTrapData 4 } numLmsEvSequences OBJECT-TYPE SYNTAX Counter ACCESS not-accessible STATUS mandatory DESCRIPTION "A monotonically increasing, wrapping counter indication the sequence number of this event, relative to the destination of the trap. Events that are not forwarded to a destination (destination temporarily disabled, windowTime exceeded) do not cause this sequence number to increase." ::= { lmsTrapData 5 } lmsEvSeverity OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The original severity assigned to the LMS event." ::= { lmsTrapData 6 } lmsEvSupportingText OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "Textual information supporting the event data. The meaning of the brief text must be obvious in the context of the trap - for the sake of brevity it need not be a gramatically correct sentence." ::= { lmsTrapData 7 } -- TRAPS -- This part of the MIB module defines the traps that the LMS event forwarding -- sub-agent may issue. lmsCritical TRAP-TYPE ENTERPRISE lms VARIABLES { lmsEvComponentType, lmsEvComponentDN, lmsEvDbId, lmsEvOID, numLmsEvSequences, lmsEvSeverity, lmsEvSupportingText } DESCRIPTION "A critical alarm forwarded from the LMS event subsystem." ::= 1 lmsMajor TRAP-TYPE ENTERPRISE lms VARIABLES { lmsEvComponentType, lmsEvComponentDN, lmsEvDbId, lmsEvOID, numLmsEvSequences, lmsEvSeverity, lmsEvSupportingText } DESCRIPTION "A major alarm forwarded from the LMS event subsystem." ::= 2 lmsMinor TRAP-TYPE ENTERPRISE lms VARIABLES { lmsEvComponentType, lmsEvComponentDN, lmsEvDbId, lmsEvOID, numLmsEvSequences, lmsEvSeverity, lmsEvSupportingText } DESCRIPTION "A minor alarm forwarded from the LMS event subsystem." ::= 3 lmsWarning TRAP-TYPE ENTERPRISE lms VARIABLES { lmsEvComponentType, lmsEvComponentDN, lmsEvDbId, lmsEvOID, numLmsEvSequences, lmsEvSeverity, lmsEvSupportingText } DESCRIPTION "A warning or indeterminate forwarded from the LMS event subsystem." ::= 4 lmsCleared TRAP-TYPE ENTERPRISE lms VARIABLES { lmsEvComponentType, lmsEvComponentDN, lmsEvDbId, lmsEvOID, numLmsEvSequences, lmsEvSeverity, lmsEvSupportingText } DESCRIPTION "A cleared forwarded from the LMS event subsystem." ::= 5 lmsInformational TRAP-TYPE ENTERPRISE lms VARIABLES { lmsEvComponentType, lmsEvComponentDN, lmsEvDbId, lmsEvOID, numLmsEvSequences, lmsEvSeverity, lmsEvSupportingText } DESCRIPTION "An informational event forwarded from the LMS event subsystem." ::= 6 -- CONFORMANCE INFORMATION -- Used ONLY in V2 MIBs -- COMPLIANCE STATEMENTS -- Used ONLY in V2 MIBs -- UNITS OF CONFORMANCE -- Used ONLY in V2 MIBs END