MADGEBOX-MIB device MIB details by Madge Networks Inc

MADGEBOX-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing MADGEBOX-MIB.

Vendor:	Madge Networks Inc
Mib:	MADGEBOX-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

------------------------------------------------------------------------------
--
-- MIB      : madgeBox					Madge Networks Ltd
--
-- Version  : 1.8					      November 1995
--
------------------------------------------------------------------------------
--
-- Overview :
--
-- The Madge box MIB defines manageable objects that are common to all  
-- Madge products.
--
-- The Madge box MIB contains the following groups :-
--
--  madgeConfig   - This group contains general configuration information
--		    for the device. Such as IP address / serial number /
--		    admin status etc.
--  madgeSecure	  - This group contains 3 tables. a list of allowed users,
--		    a list of trap destinations and a list of current users.
--  madgeDownload - This group contains all of the variables required to 
--		    configure / monitor a download to a device using TFTP
--		    or RPL. 
--  madgeIP	  - This group provides information about the current IP
--                  configuration of a device. It contains the current IP
--		    address / gateway and an indication of whether the IP
--		    address was obtained from the Config group or via BOOTP 
--		    or RARP.
--  madgeVersion  - This group provides version information for all hardware
--		    or software components within a device. This MIB 
--		    identifies the Flash banks that can be downloaded into.
--
------------------------------------------------------------------------------

	MADGEBOX-MIB DEFINITIONS ::= BEGIN

	IMPORTS
		enterprises, IpAddress 	FROM RFC1155-SMI
                OBJECT-TYPE             FROM RFC-1212;

		DisplayString 	::= OCTET STRING
		MacAddress 	::= OCTET STRING (SIZE (6))

      	-- the MadgeBox MIB

	madge		OBJECT IDENTIFIER ::= { enterprises 494 }
	madgeBox	OBJECT IDENTIFIER ::= { madge 10 }

	-- groups in the MadgeBox MIB

	madgeConfig	OBJECT IDENTIFIER ::= { madgeBox 1 }
	madgeSecure	OBJECT IDENTIFIER ::= { madgeBox 2 }
        madgeDownload   OBJECT IDENTIFIER ::= { madgeBox 3 }
        madgeIP         OBJECT IDENTIFIER ::= { madgeBox 4 }
        madgeVersion    OBJECT IDENTIFIER ::= { madgeBox 5 }

------------------------------------------------------------------------------

        madgeConfigIPAddress OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The IP address of the device."
		::= { madgeConfig 1 }

        madgeConfigIPGateway OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The default IP gateway for the device."
		::= { madgeConfig 2 }

        madgeConfigIPSubnetMask OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The IP subnet mask of the device."
		::= { madgeConfig 3 }

	madgeConfigSerialNumber OBJECT-TYPE
                SYNTAX MacAddress
                ACCESS read-only
                STATUS mandatory
                DESCRIPTION
                        "The burnt-in identifier of the device. This is a 
			 unique number and in most cases maps directly to
			 the base MAC address of the device"
		::= { madgeConfig 4 }

	madgeConfigMCodeVersion OBJECT-TYPE
		SYNTAX OCTET STRING (SIZE (4))
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Microcode version of the device. Stored in the
			 format :-

			 first Byte - not used
				    - microcode major version number
				    - microcode minor version number
			 last Byte  - microcode debug version number."
		::= { madgeConfig 5 }

	madgeConfigBCodeVersion OBJECT-TYPE
		SYNTAX OCTET STRING (SIZE (4))
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Bootcode version of the device and the hardware
		 	 version. Stored in the format :-

			 High Byte - hardware version number
				   - bootcode major version number
				   - bootcode minor version number
			 Low Byte  - bootcode debug version number."
		::= { madgeConfig 6 }

	madgeConfigMCodeFilename OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Original filename for the microcode that has
			 been downloaded to the device."
		::= { madgeConfig 7 }

	madgeConfigDeviceHealth OBJECT-TYPE
		SYNTAX INTEGER 	{
				normal		(1),
				warning		(2),
				degraded  	(3),
				critical  	(4)
				}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Current health of the device
			 Normal   - everything is fine
			 warning  - something the user should be aware of
			 degraded - the box is operating at reduced 
				    functionality
			 critical - a major problem exists with the device."
		::= { madgeConfig 8 }

	madgeConfigAdminStatus OBJECT-TYPE
		SYNTAX INTEGER 	{
				normal		(1),
				reboot		(2),
				identify  	(3),
				test  		(4),
				erase-config	(5),
				erase-flash	(6),
				tftp-ip		(7),
				tftp-ipx	(8),
				rpl-ipx		(9),
				rpl-llc		(10)
				}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The desired operating mode of the device. The mode
			 can be changed by setting this object. If the device
			 does not support the action it will return a bad 
			 value error. The behaviour of these states is
			 device specific and some of the states may latch 
			 until the state is returned to normal.

			 normal       - standard operating mode / can be used
					to cancel a download or return the
					device from any latching state.
			 reboot       - force the device to reboot. The
					device will reboot into the version
				 	of flash identified by 
					madgeConfigDefaultFlashVersion.
			 identify     - force the device to identify itself
				        by flashing lights. This state may 
					latch.
			 test	      - force the device to do a self test. 
					This state may latch.
			 erase-config - erase all configuration info 
			 erase-flash  - erase the version of microcode stored
					in the flash bank identifed by
					madgeConfigEraseFlashVersion.
			 tftp-ip      - force the device to start a TFTP
					download over IP
			 tftp-ipx     - force the device to start a TFTP
					download over IPX
			 rpl-ipx      - force the device to start a RPL 
					download over IPX
			 rpl-llc      - force the device to start a RPL
					download over LLC"
		::= { madgeConfig 9 }

	madgeConfigPassword OBJECT-TYPE
                SYNTAX DisplayString (SIZE (0..32))
                ACCESS read-write
                STATUS mandatory
                DESCRIPTION
                        "The case insensitive password for the device. Any 
			 GET operation on this object will return PUBLIC. If 
			 an attempt is made to set the password to a string 
			 greater than the maximum a BAD VALUE error will be 
			 returned" 
		::= { madgeConfig 10 }

	madgeConfigLinkTest OBJECT-TYPE
                SYNTAX INTEGER
                ACCESS read-write
                STATUS mandatory
                DESCRIPTION
			"An object that can be written with any value to test
			 whether a management station knows the correct device
			 password"
		::= { madgeConfig 11 }

	madgeConfigOperStatus OBJECT-TYPE
		SYNTAX INTEGER 	{
				normal		(1),
				reboot		(2),
				identify  	(3),
				test  		(4),
				downloading	(5)
				}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The current operating mode of the device. 
			 normal       - standard operating mode
			 reboot       - the device is rebooting
			 identify     - the device is identifying itself
			 test	      - the device is performing a self-test
			 downloading  - the device is performing a download

			 NOTE:This variable is only available on devices
  			 that support version 1.2 or greater of the Box MIB"
		::= { madgeConfig 12 }

	madgeConfigEraseFlashVersion OBJECT-TYPE
                SYNTAX INTEGER
                ACCESS read-write
                STATUS mandatory
                DESCRIPTION
			"A valid version index for the bank of flash to 
			 erase when AdminStatus is set to erase-flash.

			 NOTE:This variable is only available on devices
  			 that support version 1.2 or greater of the Box MIB"
		::= { madgeConfig 13 }

	madgeConfigDefaultFlashVersion OBJECT-TYPE
                SYNTAX INTEGER
                ACCESS read-write
                STATUS mandatory
                DESCRIPTION
			"The version index of the default flash bank that
			 a device will reboot into when a standard reboot
 			 is performed.

			 NOTE:This variable is only available on devices
  			 that support version 1.2 or greater of the Box MIB"
		::= { madgeConfig 14 }

-- The security group

	madgeSecureCurrentTableSize OBJECT-TYPE
		SYNTAX INTEGER 	
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The size of the current users table in the device.
			 A size of zero indicates that the table is not
			 supported."
		::= { madgeSecure 1 }

	madgeSecureCurrentTimeout OBJECT-TYPE
		SYNTAX INTEGER 	
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"A time in seconds used to specify how long a 
			 management station will remain registered in 
			 the Current Users table if no requests are received
			 from that management station. After this time the
			 management station will be automatically removed
			 from the table.
			 Devices are not required to support the writable
			 functionality for this variable."
		::= { madgeSecure 2 }

	madgeSecureCurrentTable OBJECT-TYPE
		SYNTAX SEQUENCE OF MadgeSecureCurrentEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"A table containing an address for all managers 
		  	 that are currently communicating with this device"
		::= { madgeSecure 3 }

        madgeSecureCurrentEntry OBJECT-TYPE
                SYNTAX MadgeSecureCurrentEntry
                ACCESS not-accessible
                STATUS mandatory
                DESCRIPTION
			"A entry containing an address for a manager
		  	 that is currently communicating with this device"
                INDEX { madgeSecureCurrentIndex }
                ::= { madgeSecureCurrentTable 1}

        MadgeSecureCurrentEntry ::= SEQUENCE  
		{
		madgeSecureCurrentIndex		INTEGER,
		madgeSecureCurrentType		INTEGER,
		madgeSecureCurrentAddress	OCTET STRING,
		madgeSecureCurrentUpdateTime	INTEGER,
		madgeSecureCurrentIPAddress	IpAddress
		}

	madgeSecureCurrentIndex OBJECT-TYPE
		SYNTAX INTEGER 
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Index into the table"
		::= { madgeSecureCurrentEntry 1 }

	madgeSecureCurrentType OBJECT-TYPE
		SYNTAX INTEGER	{
				not-used    (1),
				ip-address  (2),
				ipx-address (3),
				mac-address (4)
				}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Identifies the format of the data stored in
			 madgeSecureCurrentAddress
			 not-used     - this table entry does not contain
					valid data
			 ip-address   - this table entry contains a valid
					ip address
			 ipx-address  - this table entry contains a valid 
					ipx address
			 mac-address  - this table entry contains a valid
					mac address"
		::= { madgeSecureCurrentEntry 2 }

	madgeSecureCurrentAddress OBJECT-TYPE
		SYNTAX OCTET STRING
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"An address of a management station that is 
			 currently communicating with this device. The
			 format of the address is determined by the
			 associated entry in the madgeSecureCurrentType"
		::= { madgeSecureCurrentEntry 3 }
		
	madgeSecureCurrentUpdateTime OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The time in seconds since the management station
			 identified by this table entry last accessed this
			 device. The table entry will be removed by the
 			 device once this UpdateTime reaches the value 
			 specified in madgeSecureCurrentTimeout"
		::= { madgeSecureCurrentEntry 4 }
		
	madgeSecureCurrentIPAddress OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"If madgeSecureCurrentType is set to ip-address,
			 this variable returns the madgeSecureCurrentAddress
			 encoded as an IP Address, rather than an Octet String"
		::= { madgeSecureCurrentEntry 5 }

	madgeSecureAllowedEnabled OBJECT-TYPE
		SYNTAX INTEGER 	{
				enabled	  (1),
				disabled  (2)
				}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"Enable / disable the allowed users feature.
			 enabled  - only management stations with an address
				    in the AllowedTable will be allowed
				    to get / set MIB variables in this device
			 disabled - any management station is allowed to 
				    get / set MIB variables in this device"
		::= { madgeSecure 4 }
		
	madgeSecureAllowedTableSize OBJECT-TYPE
		SYNTAX INTEGER 	
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The size of the allowed users table in the device.
			 A size of zero indicates that the table is not
			 supported."
		::= { madgeSecure 5 }
		
	madgeSecureAllowedTable OBJECT-TYPE
		SYNTAX SEQUENCE OF MadgeSecureAllowedEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"A table containing an address for all managers 
		  	 that are allowed to get / set MIB variables in this
			 device "
		::= { madgeSecure 6 }

        madgeSecureAllowedEntry OBJECT-TYPE
                SYNTAX MadgeSecureAllowedEntry
                ACCESS not-accessible
                STATUS mandatory
                DESCRIPTION
			"An entry containing an address for a manager
		  	 that is allowed to get / set MIB variables in this
			 device "
                INDEX { madgeSecureAllowedIndex }
                ::= { madgeSecureAllowedTable 1}

        MadgeSecureAllowedEntry ::= SEQUENCE  
		{
		madgeSecureAllowedIndex		INTEGER,
		madgeSecureAllowedType		INTEGER,
		madgeSecureAllowedAddress	OCTET STRING,
		madgeSecureAllowedIPAddress	IpAddress
		}

	madgeSecureAllowedIndex OBJECT-TYPE
		SYNTAX INTEGER 
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Index into the table"
		::= { madgeSecureAllowedEntry 1 }

	madgeSecureAllowedType OBJECT-TYPE
		SYNTAX INTEGER	{
				not-used    (1),
				ip-address  (2),
				ipx-address (3),
				mac-address (4)
				}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"Identifies the format of the data stored in
			 madgeSecureAllowedAddress
			 not-used     - this table entry does not contain
					valid data
			 ip-address   - this table entry contains a valid
					ip address
			 ipx-address  - this table entry contains a valid 
					ipx address
			 mac-address  - this table entry contains a valid
					mac address"
		::= { madgeSecureAllowedEntry 2 }

	madgeSecureAllowedAddress OBJECT-TYPE
		SYNTAX OCTET STRING
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"An address of a management station that is 
			 allowed to get / set MIB variables in this device
			 The format of the address is determined by the
			 associated entry in the madgeSecureAllowedType"
		::= { madgeSecureAllowedEntry 3 }

	madgeSecureAllowedIPAddress OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"If madgeSecureAllowedType is set to ip-address,
			 this variable is equivalent to madgeSecureAllowedAddress
			 encoded as an IP Address, rather than an Octet String"
		::= { madgeSecureAllowedEntry 4 }

	madgeSecureTrapDestEnabled OBJECT-TYPE
		SYNTAX INTEGER 	{
				enabled	  (1),
				disabled  (2)
				}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"Enable / disable the trap destination feature.
			 enabled  - any SNMP traps generated by this device
				    will only be sent to management stations
				    with an address in the 
				    madgeSecureTrapDestTable
			 disabled - any SNMP traps generated by this device
				    will be sent to all management stations
				    currently known by this device."
		::= { madgeSecure 7 }
		
	madgeSecureTrapDestTableSize OBJECT-TYPE
		SYNTAX INTEGER 	
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The size of the trap destinations table in the device.
			 A size of zero indicates that this table is not 
			 supported."
		::= { madgeSecure 8 }
		
	madgeSecureTrapDestTable OBJECT-TYPE
		SYNTAX SEQUENCE OF MadgeSecureTrapDestEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"A table containing the address for all managers 
		  	 that are to receive SNMP traps generated by this
			 device"
		::= { madgeSecure 9 }

        madgeSecureTrapDestEntry OBJECT-TYPE
                SYNTAX MadgeSecureTrapDestEntry
                ACCESS not-accessible
                STATUS mandatory
                DESCRIPTION
			"An entry containing the address for a manager
		  	 that is to receive SNMP traps generated by this
			 device"
                INDEX { madgeSecureTrapDestIndex }
                ::= { madgeSecureTrapDestTable 1}

        MadgeSecureTrapDestEntry ::= SEQUENCE  
		{
		madgeSecureTrapDestIndex	INTEGER,
		madgeSecureTrapDestType	  	INTEGER,
		madgeSecureTrapDestAddress 	OCTET STRING,
		madgeSecureTrapDestIPAddress 	IpAddress
		}

	madgeSecureTrapDestIndex OBJECT-TYPE
		SYNTAX INTEGER 
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Index into the table"
		::= { madgeSecureTrapDestEntry 1 }

	madgeSecureTrapDestType OBJECT-TYPE
		SYNTAX INTEGER	{
				not-used    (1),
				ip-address  (2),
				ipx-address (3),
				mac-address (4)
				}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"Identifies the format of the data stored in
			 madgeSecureTrapDestAddress
			 not-used     - this table entry does not contain
					valid data
			 ip-address   - this table entry contains a valid
					ip address
			 ipx-address  - this table entry contains a valid 
					ipx address
			 mac-address  - this table entry contains a valid
					mac address"
		::= { madgeSecureTrapDestEntry 2 }

	madgeSecureTrapDestAddress OBJECT-TYPE
		SYNTAX OCTET STRING
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"An address for a management station that is 
			 to receive any SNMP traps generated by this device.
			 The format of the address is determined by the
			 associated entry in the madgeSecureTrapDestType"
		::= { madgeSecureTrapDestEntry 3 }
		
	madgeSecureTrapDestIPAddress OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"If madgeSecureTrapDestType is set to ip-address,
			 this variable is equivalent to madgeSecureTrapDestAddress
			 encoded as an IP Address, rather than an Octet String"
		::= { madgeSecureTrapDestEntry 4 }

-- The Download Group
-- NOTE : This group is only available on devices that support version 1.2
--        or greater of the Madge Box MIB

        madgeDownloadIPAddress OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The IP address of the server to use for the
			 download when using TFTP-IP"
		::= { madgeDownload 1 }

        madgeDownloadIPGateway OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The IP gateway to be used to access the server.
			 If this variable is zero then use the default 
			 gateway in madgeConfigIPGateway."
		::= { madgeDownload 2 }

        madgeDownloadIPXAddress OBJECT-TYPE
		SYNTAX OCTET STRING (SIZE (12))
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The IPX address of the server to use for the
			 download when using TFTP-IPX or RPL-IPX"
		::= { madgeDownload 3 }

        madgeDownloadNodeAddress OBJECT-TYPE
		SYNTAX MacAddress
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The Node address of the server to use for the
			 download when using RPL-LLC "
		::= { madgeDownload 4 }

        madgeDownloadFileName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The filename of the microcode to download. The
			 maximum length of this string is device specific. 
			 If a string that is too long is written to this
			 variable BAD VALUE will be returned."
		::= { madgeDownload 5 }

	madgeDownloadDestination OBJECT-TYPE
		SYNTAX INTEGER 
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The destination for the download. This will 
			 contain the madgeVersionIndex for the download
			 destination."
		::= { madgeDownload 6 }

	madgeDownloadState OBJECT-TYPE
		SYNTAX INTEGER	{
				idle			(1),
				tftp-waiting-ip		(2),
				tftp-running-ip		(3),
				tftp-waiting-ipx	(4),
				tftp-running-ipx	(5),
				waiting-xmodem		(6),
				running-xmodem     	(7),
				rpl-waiting-ipx		(8),
				rpl-running-ipx		(9),
				rpl-waiting-llc		(10),
				rpl-running-llc		(11)
				}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The current state of the download"
		::= { madgeDownload 7 }

	madgeDownloadFailureCode OBJECT-TYPE
		SYNTAX INTEGER	{
				no-error	    (1),
				config-error	    (2),
				busy		    (3),
				timeout		    (4),
				cancelled	    (5),
				incompatible-file   (6),
			  	file-too-big	    (7),
				protocol-error	    (8),
				undefined-error	    (100),
				file-not-found	    (101),
				access-violation    (102),
				out-of-memory	    (103),
				illegal-operation   (104),
				unknown-transfer-id (105),
				file-already-exists (106),
				no-such-user	    (107)
				}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"While a download is in progress this will 
			always be 'no-error'.  After a download is complete 
			this indicates the success or failure of the download.
			If it is anything other than 'no-error' then 
			'madgedownloadStatusText' will contain a textual 
			description of the error.  Error codes from 100 
			upwards are errors returned from a TFTP server.  
			Errors below this are locally generated."
		::= { madgeDownload 8 }

	madgeDownloadStatusText OBJECT-TYPE
		SYNTAX DisplayString (SIZE(0..64))
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"A display string describing the status of the
			 download in progress, or the reason for failure of
			 the last download.
			 If FailureCode = no-error then StatusText may be
			 empty."
		::= { madgeDownload 9 }

	madgeDownloadSize OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"While a download is in progress this indicates the 
			number of bytes transferred so far.  After the 
			download is completed this remains at the final 
			size downloaded."
		::= { madgeDownload 10 }

-- The IP Services Group
-- NOTE : This group is only available on devices that support version 1.2
--        or greater of the Madge Box MIB

        madgeIPCurrentAddress OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The IP address that is currently being used by
			 this device. The IP address could have been 
			 obtained from madgeConfigIPAddress or by some 
			 other means indicated by madgeIPDiscoveryMethod"
		::= { madgeIP 1 }

        madgeIPCurrentGateway OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The IP gateway that is currently being used by
			 this device. The IP gateway could have been
			 obtained from madgeConfigIPGateway or by some
			 other means indicated by madgeIPDiscoveryMethod"
		::= { madgeIP 2 }

        madgeIPCurrentSubnetMask OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The IP Subnet Mask that is currently being used by
			 this device. The IP Subnet Mask could have been
			 obtained from madgeConfigIPSubnetMask or by some
			 other means indicated by madgeIPDiscoveryMethod"
		::= { madgeIP 3 }

        madgeIPDiscoveryMethod OBJECT-TYPE
		SYNTAX INTEGER	{
				not-discovered (1),
				via-config     (2),
				via-bootp      (3),
				via-rarp       (4)
				}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The source of the currently used IP address,
			 gateway and subnet mask."
		::= { madgeIP 4 }

        madgeIPBootpEnabled OBJECT-TYPE
		SYNTAX INTEGER	{
				enabled  	(1),	
				disabled 	(2),
				not-supported 	(3)
				}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"Enable / Disable the use of BootP for IP address
			 discovery"
		::= { madgeIP 5 }

        madgeIPRarpEnabled OBJECT-TYPE
		SYNTAX INTEGER	{
				enabled  	(1),	
				disabled 	(2),
				not-supported 	(3)
				}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"Enable / Disable the use of Rarp for IP address
			 discovery"
		::= { madgeIP 6 }

-- The Version Group
-- NOTE : This group is only available on devices that support version 1.2
--        or greater of the Madge Box MIB

        madgeVersionTable OBJECT-TYPE
		SYNTAX SEQUENCE OF MadgeVersionEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"A table containing version information for all
			 hardware / software components in a device."
		::= { madgeVersion 1 }

        madgeVersionEntry OBJECT-TYPE
		SYNTAX MadgeVersionEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"An entry containing version information for a
			 hardware / software component in a device."
		INDEX {madgeVersionIndex }
		::= { madgeVersionTable 1 }

        MadgeVersionEntry ::= SEQUENCE
		{
		madgeVersionIndex	INTEGER,
		madgeVersionDescription	DisplayString,
		madgeVersionLocation	DisplayString,
		madgeVersionNumber	OCTET STRING,
		madgeVersionType	INTEGER
		}

	madgeVersionIndex OBJECT-TYPE
		SYNTAX INTEGER 
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Index into the table"
		::= { madgeVersionEntry 1 }

        madgeVersionDescription OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..64))
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"A string containing a textual description for
			 the component identified by this entry."
		::= { madgeVersionEntry 2 }

        madgeVersionLocation OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"A string containing a textual description of the
			 location of the component identified by this entry.
			 eg Flash Bank A	Flash ROM
			    Boot ROM    	Boot Bank A
			    Base Hardware	Hardware Module "
		::= { madgeVersionEntry 3 }

        madgeVersionNumber OBJECT-TYPE
		SYNTAX OCTET STRING (SIZE (3))
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Version number for the component. Stored in the
			 format :-

			 first Byte - major version number
				    - minor version number
			 last Byte  - debug version number."
		::= { madgeVersionEntry 4 }

	madgeVersionType OBJECT-TYPE
		SYNTAX INTEGER	{
				flash			(1),
				boot-fixed		(2),
				boot-updateable 	(3),
				hardware-fixed		(4),
				hardware-upgradeable 	(5),
				other			(6)
				}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The type of object that this table entry contains
			 version information for."
		::= { madgeVersionEntry 5 }

        madgeVersionCount OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of entries in the version table"
		::= { madgeVersion 2 }

	END