| ringswitchBasePSFanSpeed |
.1.3.6.1.4.1.494.4.1.1 |
|
The number of revolutions per minute being reported by
the fan internal to the system power supply. If this
value is read as zero, the fan is no longer operating
|
| ringswitchBaseExtFanSpeed |
.1.3.6.1.4.1.494.4.1.2 |
|
The number of revolutions per minute being reported by
the external system fan. If this value is read as zero,
the fan is no longer operating
|
| ringswitchBaseRipSapSuppression |
.1.3.6.1.4.1.494.4.1.3 |
|
If this variable is set to enable the system will
only forward broadcast-addressed IPX RIP and SAP
Response frames to those ports that have recently
sourced such a frame. This reduces the number of
gratuitous frames sent out on LANs that only
have IPX workstations attached.
A value of disable causes no special action to be
taken for such frames.
|
| ringswitchBaseAREConversion |
.1.3.6.1.4.1.494.4.1.4 |
|
This variable controls the action taken when
forwarding All Routes Explorer frames.
enable-first: convert all ARE frames with a RIF
length of 2 to STE frames.
enable-all: convert all ARE frames to STE frames.
enable-bcast-first: convert all ARE frames with the
broadcast destination address, with
a RIF length of 2 to STE frames.
enable-bcast-all: convert all ARE frames with the
broadcast destination address to
STE frames.
disable: follow normal forwarding rules for ARE
frames.
|
| ringswitchPortEntry |
.1.3.6.1.4.1.494.4.2.1.1 |
| ringswitchSRAdminState |
.1.3.6.1.4.1.494.4.3.1 |
|
The desired state of source routing; allows
source routing to be enabled or disabled for
the whole Ringswitch
|
| ringswitchSROperState |
.1.3.6.1.4.1.494.4.3.2 |
|
The actual state of source routing.
If ringswitchSRAdminState is 'disabled' then this
state will be inactive. If ringswitchSRAdminState is
'enabled' then this state should be 'active', but if
for some reason the Ringswitch is unable to perform
source routing then this state will be 'inactive'.
|
| ringswitchLCDTotalDisplays |
.1.3.6.1.4.1.494.4.4.1 |
|
The total number of displays on the Ringswitch.
|
| ringswitchLCDCurrentDisplay |
.1.3.6.1.4.1.494.4.4.2 |
|
The number of the display that the Ringswitch is
currently showing.
|
| ringswitchLCDCurrentMsgText |
.1.3.6.1.4.1.494.4.4.3 |
|
The actual lcd message text, including a carriage
return after the first line, and a null character
after the second line.
|
| ringswitchLCDTableEntry |
.1.3.6.1.4.1.494.4.4.4.1 |
|
Arguments and message number details for each
LCD entry.
|
| ringswitchLANEntry |
.1.3.6.1.4.1.494.4.5.1.1 |
|
Name and status information associated with each
virtual LAN entry.
|
| ringswitchLANRingEntry |
.1.3.6.1.4.1.494.4.5.2.1 |
|
Name and status information associated with each
virtual LAN ring table entry.
|
| ringswitchPortNum |
.1.3.6.1.4.1.494.4.2.1.1.1 |
|
The port number of the port for which this entry
contains Ringswitch management information.
|
| ringswitchPortRingStatus |
.1.3.6.1.4.1.494.4.2.1.1.2 |
|
The status of the ring to which this port is
connected.
|
| ringswitchPortAdapterStatus |
.1.3.6.1.4.1.494.4.2.1.1.3 |
|
The status of the adapter used by this port.
|
| ringswitchPortMediaType |
.1.3.6.1.4.1.494.4.2.1.1.4 |
|
Media type of the port.
|
| ringswitchPortIfMode |
.1.3.6.1.4.1.494.4.2.1.1.5 |
|
Node or concentrator status of the port.
|
| ringswitchPortRingSpeed |
.1.3.6.1.4.1.494.4.2.1.1.6 |
|
Speed of the ring to which this port is connected.
|
| ringswitchPortTestState |
.1.3.6.1.4.1.494.4.2.1.1.7 |
|
Current state of the bridge test.
|
| ringswitchPortTestError |
.1.3.6.1.4.1.494.4.2.1.1.8 |
|
Result of the bridge test.
|
| ringswitchPortTestPhase |
.1.3.6.1.4.1.494.4.2.1.1.9 |
|
Current phase of the bridge test.
|
| ringswitchPortSummary |
.1.3.6.1.4.1.494.4.2.1.1.10 |
|
This is a three octet field which packs some of the
port attributes into a single mib entry. Each nibble
represents a different attribute of the port:
ifAdminStatus (most significant),
ringswitchPortRingStatus,
ringswitchPortAdapterStatus,
ringswitchPortMediaType,
ringswitchPortIfMode,
ringswitchPortRingSpeed,
ringswitchPortTestState,
ringswitchPortTestError (least significant)
|
| ringswitchPortAddress |
.1.3.6.1.4.1.494.4.2.1.1.11 |
|
The hard wired address of the port.
|
| ringswitchPortLAA |
.1.3.6.1.4.1.494.4.2.1.1.12 |
|
The locally administered address of the port.
|
| ringswitchPortStationType |
.1.3.6.1.4.1.494.4.2.1.1.13 |
|
Workstations-only status of the port; if this is
limited, the port only has workstations on it, and
broadcast frames received on this port will not be
transmitted on other limited ports.
|
| ringswitchPortRPSEnable |
.1.3.6.1.4.1.494.4.2.1.1.14 |
|
Enables or disables the Ring Parameter Server
function on the port. If this variable is set to
enabled, the port will enable the RPS functional
address, and respond to Request Parameters MAC
frames, supplying the port's segment number in
the response.
|
| ringswitchPortCutThruEnable |
.1.3.6.1.4.1.494.4.2.1.1.15 |
|
Enables or disables cut-through switching on the
port. In some circumstances (e.g., 4 to 16 MB
switching), cut-through will always be disabled,
irrespective of the state of this variable.
|
| ringswitchPortInOctets |
.1.3.6.1.4.1.494.4.2.1.1.16 |
|
48 bit version of the interface MIB counter
ifInOctets.
|
| ringswitchPortOutOctets |
.1.3.6.1.4.1.494.4.2.1.1.17 |
|
48 bit version of the interface MIB counter
ifOutOctets.
|
| ringswitchPortSpecInFrames |
.1.3.6.1.4.1.494.4.2.1.1.18 |
|
48 bit version of the Bridge MIB counter
srPortSpecInFrames.
|
| ringswitchPortSpecOutFrames |
.1.3.6.1.4.1.494.4.2.1.1.19 |
|
48 bit version of the Bridge MIB counter
srPortSpecOutFrames.
|
| ringswitchPortApeInFrames |
.1.3.6.1.4.1.494.4.2.1.1.20 |
|
48 bit version of the Bridge MIB counter
srPortApeInFrames.
|
| ringswitchPortApeOutFrames |
.1.3.6.1.4.1.494.4.2.1.1.21 |
|
48 bit version of the Bridge MIB counter
srPortApeOutFrames.
|
| ringswitchPortSteInFrames |
.1.3.6.1.4.1.494.4.2.1.1.22 |
|
48 bit version of the Bridge MIB counter
srPortSteInFrames.
|
| ringswitchPortSteOutFrames |
.1.3.6.1.4.1.494.4.2.1.1.23 |
|
48 bit version of the Bridge MIB counter
srPortSteOutFrames.
|
| ringswitchLCDNum |
.1.3.6.1.4.1.494.4.4.4.1.1 |
|
The lcd number of the lcd for which this entry
contains display details.
|
| ringswitchLCDMsgText |
.1.3.6.1.4.1.494.4.4.4.1.2 |
|
The actual lcd message text, including a carriage
return after the first line, and a null character
after the second line.
|
| ringswitchLANIndex |
.1.3.6.1.4.1.494.4.5.1.1.1 |
|
The virtual LAN number for which this entry
contains virtual LAN details.
|
| ringswitchLANName |
.1.3.6.1.4.1.494.4.5.1.1.2 |
|
The name that the administrator has given this
virtual LAN.
|
| ringswitchLANPermeable |
.1.3.6.1.4.1.494.4.5.1.1.3 |
|
In an 'impermeable' group, broadcast frames which
were received on a port in the group, but were not
originated in the group, are discarded. In a
'permeable' group, such frames are transmitted on
the other ports in the group.
|
| ringswitchLANStatus |
.1.3.6.1.4.1.494.4.5.1.1.4 |
|
The current status of this virtual LAN, a status of
'invalid' indicates that the virtual LAN's associated
name and ring list are meaningless until the group is
validated.
|
| ringswitchLANRingGroup |
.1.3.6.1.4.1.494.4.5.2.1.1 |
|
The virtual LAN index for which this entry
contains virtual LAN ring details.
|
| ringswitchLANRingIndex |
.1.3.6.1.4.1.494.4.5.2.1.2 |
|
The ring index for which this entry
contains virtual LAN ring details.
|
| ringswitchLANRingNum |
.1.3.6.1.4.1.494.4.5.2.1.3 |
|
The ring number contained in the virtual LAN.
|
| ringswitchLANRingStatus |
.1.3.6.1.4.1.494.4.5.2.1.4 |
|
The current status of this virtual LAN ring entry,
a status of 'invalid' indicates that the ring entry
is not in use and the associated ring number is
meaningless.
|
