Nortel-Magellan-Passport-DisdnJapanInsMIB device MIB details by Northern Telecom Ltd
Nortel-Magellan-Passport-DisdnJapanInsMIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing Nortel-Magellan-Passport-DisdnJapanInsMIB.
Vendor: | Northern Telecom Ltd |
---|---|
Mib: | Nortel-Magellan-Passport-DisdnJapanInsMIB [download] [view objects] |
Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
Nortel-Magellan-Passport-DisdnJapanInsMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB DisplayString, StorageType, RowStatus, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB NonReplicated, Link FROM Nortel-Magellan-Passport-TextualConventionsMIB dataSigChanIndex, dataSigChan FROM Nortel-Magellan-Passport-DataIsdnMIB; -- LAST-UPDATED "9808030000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- DisdnJapanIns Enterprise MIB." disdnJapanInsMIB OBJECT IDENTIFIER ::= { passportMIBs 118 } -- DataSigChan/n JapanIns -- The JapanIns component defines the operational characteristics of -- the signalling channel's connection to the external equipment. dataSigChanIns OBJECT IDENTIFIER ::= { dataSigChan 11 } dataSigChanInsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DataSigChanInsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of dataSigChanIns components." ::= { dataSigChanIns 1 } dataSigChanInsRowStatusEntry OBJECT-TYPE SYNTAX DataSigChanInsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single dataSigChanIns component." INDEX { dataSigChanIndex, dataSigChanInsIndex } ::= { dataSigChanInsRowStatusTable 1 } DataSigChanInsRowStatusEntry ::= SEQUENCE { dataSigChanInsRowStatus RowStatus, dataSigChanInsComponentName DisplayString, dataSigChanInsStorageType StorageType, dataSigChanInsIndex NonReplicated } dataSigChanInsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of dataSigChanIns components. These components can be added and deleted." ::= { dataSigChanInsRowStatusEntry 1 } dataSigChanInsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { dataSigChanInsRowStatusEntry 2 } dataSigChanInsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the dataSigChanIns tables." ::= { dataSigChanInsRowStatusEntry 4 } dataSigChanInsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the dataSigChanIns tables." ::= { dataSigChanInsRowStatusEntry 10 } dataSigChanInsL2Table OBJECT-TYPE SYNTAX SEQUENCE OF DataSigChanInsL2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group represents the provisionable Layer 2 attributes of the Q931 CCITT protocol." ::= { dataSigChanIns 11 } dataSigChanInsL2Entry OBJECT-TYPE SYNTAX DataSigChanInsL2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the dataSigChanInsL2Table." INDEX { dataSigChanIndex, dataSigChanInsIndex } ::= { dataSigChanInsL2Table 1 } DataSigChanInsL2Entry ::= SEQUENCE { dataSigChanInsT23 Unsigned32, dataSigChanInsT200 Unsigned32, dataSigChanInsN200 Unsigned32, dataSigChanInsT203 Unsigned32, dataSigChanInsN201 Unsigned32, dataSigChanInsCircuitSwitchedK Unsigned32 } dataSigChanInsT23 OBJECT-TYPE SYNTAX Unsigned32 (1..15) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the layer2 enable request timer." DEFVAL { 10 } ::= { dataSigChanInsL2Entry 1 } dataSigChanInsT200 OBJECT-TYPE SYNTAX Unsigned32 (1..20) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum time between a layer 2 frame and its acknowledgement" DEFVAL { 2 } ::= { dataSigChanInsL2Entry 2 } dataSigChanInsN200 OBJECT-TYPE SYNTAX Unsigned32 (1..8) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of re-transmissions of a layer2 frame." DEFVAL { 3 } ::= { dataSigChanInsL2Entry 3 } dataSigChanInsT203 OBJECT-TYPE SYNTAX Unsigned32 (2..40) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum time that a no layer 2 traffic situation can last. Expiry triggers a check on whether the far end is a live." DEFVAL { 10 } ::= { dataSigChanInsL2Entry 4 } dataSigChanInsN201 OBJECT-TYPE SYNTAX Unsigned32 (4..260) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of octets in an information field." DEFVAL { 260 } ::= { dataSigChanInsL2Entry 5 } dataSigChanInsCircuitSwitchedK OBJECT-TYPE SYNTAX Unsigned32 (1..632) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of frames for B channel use." DEFVAL { 7 } ::= { dataSigChanInsL2Entry 6 } dataSigChanInsProvTable OBJECT-TYPE SYNTAX SEQUENCE OF DataSigChanInsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the general options of the d-channel signalling link." ::= { dataSigChanIns 13 } dataSigChanInsProvEntry OBJECT-TYPE SYNTAX DataSigChanInsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the dataSigChanInsProvTable." INDEX { dataSigChanIndex, dataSigChanInsIndex } ::= { dataSigChanInsProvTable 1 } DataSigChanInsProvEntry ::= SEQUENCE { dataSigChanInsSide INTEGER } dataSigChanInsSide OBJECT-TYPE SYNTAX INTEGER { network(1), user(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the layer 2 HDLC interface is the network or user side of the connection." DEFVAL { user } ::= { dataSigChanInsProvEntry 1 } dataSigChanInsOperTable OBJECT-TYPE SYNTAX SEQUENCE OF DataSigChanInsOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group provides the operational attributes for the signalling protocol." ::= { dataSigChanIns 15 } dataSigChanInsOperEntry OBJECT-TYPE SYNTAX DataSigChanInsOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the dataSigChanInsOperTable." INDEX { dataSigChanIndex, dataSigChanInsIndex } ::= { dataSigChanInsOperTable 1 } DataSigChanInsOperEntry ::= SEQUENCE { dataSigChanInsActiveChannels Unsigned32, dataSigChanInsPeakActiveChannels Unsigned32, dataSigChanInsDChanStatus INTEGER } dataSigChanInsActiveChannels OBJECT-TYPE SYNTAX Unsigned32 (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of currently active channels. This includes data and voice channels." DEFVAL { 0 } ::= { dataSigChanInsOperEntry 1 } dataSigChanInsPeakActiveChannels OBJECT-TYPE SYNTAX Unsigned32 (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period." DEFVAL { 0 } ::= { dataSigChanInsOperEntry 4 } dataSigChanInsDChanStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(0), establishing(1), established(2), enabling(3), inService(4), restarting(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is enabled. If the signalling channel stays in the established state, then it is waiting for a restart from the PBX. enabling means that the resources for processing calls are being initialized. If the signalling channel stays in the enabling state then it is waiting for a restart acknowledgement from the PBX. inService means that the resources for processing calls are available. restarting means that the resources for call processing are being rei- initialized." ::= { dataSigChanInsOperEntry 7 } dataSigChanInsToolsTable OBJECT-TYPE SYNTAX SEQUENCE OF DataSigChanInsToolsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains a series of operational attributes which turn on and off several kinds of tracing." ::= { dataSigChanIns 16 } dataSigChanInsToolsEntry OBJECT-TYPE SYNTAX DataSigChanInsToolsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the dataSigChanInsToolsTable." INDEX { dataSigChanIndex, dataSigChanInsIndex } ::= { dataSigChanInsToolsTable 1 } DataSigChanInsToolsEntry ::= SEQUENCE { dataSigChanInsTracing OCTET STRING } dataSigChanInsTracing OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueue attribute in Col/debug must be greater than 0 and a Telnet NMIS session must list the debug stream in in its data streams (ex. set nmis telnet session/1 dataStreams debug). Different types of tracing can be enabled simultaneously. Note that tracing consumes additional CPU resources and will slow down call processing on a heavily loaded card. If there is message block exhaustion tracing will be suspended for a period and then automatically reenabled. An alarm is generated on tracing suspension and resumption. This mechanism protects the function processor against excessive numbers of tracing messages. Types of tracing include: protocolErrors - get details of any protocol errors which are occuring. Protocol errors are also reported in summary form as alarms. q931Summary - Summary of the Q.931 messages on the signalling link, including certain call details (calling number, called number, release codes). q931Hex - Q.931 messages displayed in hex format. Useful to determine protocol compliance in case of errors reported on local or remote ends. q931Symbolic - Q.931 messages parsed to give maximum detail. Useful for understanding content of messages flowing on the link. portHex - Messages in hex format being sent and received on the link. Description of bits: protocolErrors(0) q931Summary(1) q931Hex(2) q931Symbolic(3) portHex(4)" ::= { dataSigChanInsToolsEntry 1 } -- -- DataSigChan/n ts014 Framer -- -- The Framer component controls link layer framing for application -- components sending and receiving data on a link interface. It is also -- through Framer, that an application component is associated with a -- specific hardware link interface. -- -- The Framer component provides provisionable attributes related to -- datapath aspects of the hardware interface (such as crc and frame -- length). The Framer component also provides a provisionable -- attribute which binds the application component to a specific -- hardware component. -- -- The Framer component contains operational attributes for link -- interface datapath statistics (such as frame counts and aborts). -- dataSigChanInsFramer OBJECT IDENTIFIER ::= { dataSigChanIns 2 } dataSigChanInsFramerRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DataSigChanInsFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of dataSigChanInsFramer components." ::= { dataSigChanInsFramer 1 } dataSigChanInsFramerRowStatusEntry OBJECT-TYPE SYNTAX DataSigChanInsFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single dataSigChanInsFramer component." INDEX { dataSigChanIndex, dataSigChanInsIndex, dataSigChanInsFramerIndex } ::= { dataSigChanInsFramerRowStatusTable 1 } DataSigChanInsFramerRowStatusEntry ::= SEQUENCE { dataSigChanInsFramerRowStatus RowStatus, dataSigChanInsFramerComponentName DisplayString, dataSigChanInsFramerStorageType StorageType, dataSigChanInsFramerIndex NonReplicated } dataSigChanInsFramerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of dataSigChanInsFramer components. These components cannot be added nor deleted." ::= { dataSigChanInsFramerRowStatusEntry 1 } dataSigChanInsFramerComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { dataSigChanInsFramerRowStatusEntry 2 } dataSigChanInsFramerStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the dataSigChanInsFramer tables." ::= { dataSigChanInsFramerRowStatusEntry 4 } dataSigChanInsFramerIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the dataSigChanInsFramer tables." ::= { dataSigChanInsFramerRowStatusEntry 10 } dataSigChanInsFramerProvTable OBJECT-TYPE SYNTAX SEQUENCE OF DataSigChanInsFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups." ::= { dataSigChanInsFramer 10 } dataSigChanInsFramerProvEntry OBJECT-TYPE SYNTAX DataSigChanInsFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the dataSigChanInsFramerProvTable." INDEX { dataSigChanIndex, dataSigChanInsIndex, dataSigChanInsFramerIndex } ::= { dataSigChanInsFramerProvTable 1 } DataSigChanInsFramerProvEntry ::= SEQUENCE { dataSigChanInsFramerInterfaceName Link } dataSigChanInsFramerInterfaceName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run." ::= { dataSigChanInsFramerProvEntry 1 } dataSigChanInsFramerStateTable OBJECT-TYPE SYNTAX SEQUENCE OF DataSigChanInsFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { dataSigChanInsFramer 12 } dataSigChanInsFramerStateEntry OBJECT-TYPE SYNTAX DataSigChanInsFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the dataSigChanInsFramerStateTable." INDEX { dataSigChanIndex, dataSigChanInsIndex, dataSigChanInsFramerIndex } ::= { dataSigChanInsFramerStateTable 1 } DataSigChanInsFramerStateEntry ::= SEQUENCE { dataSigChanInsFramerAdminState INTEGER, dataSigChanInsFramerOperationalState INTEGER, dataSigChanInsFramerUsageState INTEGER } dataSigChanInsFramerAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { dataSigChanInsFramerStateEntry 1 } dataSigChanInsFramerOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { dataSigChanInsFramerStateEntry 2 } dataSigChanInsFramerUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { dataSigChanInsFramerStateEntry 3 } dataSigChanInsFramerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DataSigChanInsFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational statistics data for a Framer component." ::= { dataSigChanInsFramer 13 } dataSigChanInsFramerStatsEntry OBJECT-TYPE SYNTAX DataSigChanInsFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the dataSigChanInsFramerStatsTable." INDEX { dataSigChanIndex, dataSigChanInsIndex, dataSigChanInsFramerIndex } ::= { dataSigChanInsFramerStatsTable 1 } DataSigChanInsFramerStatsEntry ::= SEQUENCE { dataSigChanInsFramerFrmToIf Unsigned32, dataSigChanInsFramerFrmFromIf Unsigned32, dataSigChanInsFramerOctetFromIf Unsigned32, dataSigChanInsFramerAborts Unsigned32, dataSigChanInsFramerCrcErrors Unsigned32, dataSigChanInsFramerLrcErrors Unsigned32, dataSigChanInsFramerNonOctetErrors Unsigned32, dataSigChanInsFramerOverruns Unsigned32, dataSigChanInsFramerUnderruns Unsigned32, dataSigChanInsFramerLargeFrmErrors Unsigned32 } dataSigChanInsFramerFrmToIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value." DEFVAL { 0 } ::= { dataSigChanInsFramerStatsEntry 1 } dataSigChanInsFramerFrmFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value." DEFVAL { 0 } ::= { dataSigChanInsFramerStatsEntry 2 } dataSigChanInsFramerOctetFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The number of bytes received from the link interface by Framer." DEFVAL { 0 } ::= { dataSigChanInsFramerStatsEntry 3 } dataSigChanInsFramerAborts OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value." DEFVAL { 0 } ::= { dataSigChanInsFramerStatsEntry 4 } dataSigChanInsFramerCrcErrors OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value." DEFVAL { 0 } ::= { dataSigChanInsFramerStatsEntry 5 } dataSigChanInsFramerLrcErrors OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value." DEFVAL { 0 } ::= { dataSigChanInsFramerStatsEntry 6 } dataSigChanInsFramerNonOctetErrors OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value." DEFVAL { 0 } ::= { dataSigChanInsFramerStatsEntry 7 } dataSigChanInsFramerOverruns OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value." DEFVAL { 0 } ::= { dataSigChanInsFramerStatsEntry 8 } dataSigChanInsFramerUnderruns OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum value." DEFVAL { 0 } ::= { dataSigChanInsFramerStatsEntry 9 } dataSigChanInsFramerLargeFrmErrors OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames received which were too large. The frame was longer than 500 bytes. This count wraps to zero after reaching its maximum value." DEFVAL { 0 } ::= { dataSigChanInsFramerStatsEntry 10 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { dataSigChanInsFramerOctetFromIf, -- dataSigChanInsT203, -- dataSigChanInsFramerFrmToIf, -- dataSigChanInsDChanStatus, -- dataSigChanInsFramerAdminState, -- dataSigChanInsFramerLrcErrors, -- dataSigChanInsFramerOverruns, -- dataSigChanInsFramerAborts, -- dataSigChanInsFramerRowStatus, -- dataSigChanInsFramerLargeFrmErrors, -- dataSigChanInsTracing, -- dataSigChanInsFramerStorageType, -- dataSigChanInsRowStatus, -- dataSigChanInsN201, -- dataSigChanInsT23, -- dataSigChanInsFramerNonOctetErrors, -- dataSigChanInsPeakActiveChannels, -- dataSigChanInsFramerUsageState, -- dataSigChanInsStorageType, -- dataSigChanInsFramerComponentName, -- dataSigChanInsN200, -- dataSigChanInsFramerFrmFromIf, -- dataSigChanInsFramerInterfaceName, -- dataSigChanInsComponentName, -- dataSigChanInsCircuitSwitchedK, -- dataSigChanInsFramerUnderruns, -- dataSigChanInsSide, -- dataSigChanInsFramerCrcErrors, -- dataSigChanInsActiveChannels, -- dataSigChanInsFramerOperationalState, -- dataSigChanInsT200 } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." disdnJapanInsGroup OBJECT IDENTIFIER ::= { disdnJapanInsMIB 1 } disdnJapanInsGroupBE OBJECT IDENTIFIER ::= { disdnJapanInsGroup 5 } disdnJapanInsGroupBE00 OBJECT IDENTIFIER ::= { disdnJapanInsGroupBE 1 } disdnJapanInsGroupBE00A OBJECT IDENTIFIER ::= { disdnJapanInsGroupBE00 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 DisdnJapanIns." -- STATUS mandatory -- DESCRIPTION "DisdnJapanIns MIB: MIB Version BE00A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-DisdnJapanInsMIB -- INCLUDES { disdnJapanInsGroupBE00A } disdnJapanInsCapabilities OBJECT IDENTIFIER ::= { disdnJapanInsMIB 3 } disdnJapanInsCapabilitiesBE OBJECT IDENTIFIER ::= { disdnJapanInsCapabilities 5 } disdnJapanInsCapabilitiesBE00 OBJECT IDENTIFIER ::= { disdnJapanInsCapabilitiesBE 1 } disdnJapanInsCapabilitiesBE00A OBJECT IDENTIFIER ::= { disdnJapanInsCapabilitiesBE00 2 } END