Nortel-Magellan-Passport-FrameRelayDteMIB device MIB details by Northern Telecom Ltd
Nortel-Magellan-Passport-FrameRelayDteMIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing Nortel-Magellan-Passport-FrameRelayDteMIB.
Vendor: | Northern Telecom Ltd |
---|---|
Mib: | Nortel-Magellan-Passport-FrameRelayDteMIB [download] [view objects] |
Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
Nortel-Magellan-Passport-FrameRelayDteMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 components, passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB Counter32, DisplayString, StorageType, RowStatus, PassportCounter64, InterfaceIndex, Gauge32, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB DashedHexString, NonReplicated, HexString, EnterpriseDateAndTime, Link FROM Nortel-Magellan-Passport-TextualConventionsMIB; -- LAST-UPDATED "9808030000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- FrameRelayDte Enterprise MIB." frameRelayDteMIB OBJECT IDENTIFIER ::= { passportMIBs 32 } -- FrameRelayDte/n -- The FrameRelayDte component defines the general parameters for -- implementing the Frame Relay DTE interface. frDte OBJECT IDENTIFIER ::= { components 101 } frDteRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of frDte components." ::= { frDte 1 } frDteRowStatusEntry OBJECT-TYPE SYNTAX FrDteRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single frDte component." INDEX { frDteIndex } ::= { frDteRowStatusTable 1 } FrDteRowStatusEntry ::= SEQUENCE { frDteRowStatus RowStatus, frDteComponentName DisplayString, frDteStorageType StorageType, frDteIndex Integer32 } frDteRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of frDte components. These components can be added and deleted." ::= { frDteRowStatusEntry 1 } frDteComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { frDteRowStatusEntry 2 } frDteStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the frDte tables." ::= { frDteRowStatusEntry 4 } frDteIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the frDte tables." ::= { frDteRowStatusEntry 10 } frDteCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { frDte 20 } frDteCidDataEntry OBJECT-TYPE SYNTAX FrDteCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteCidDataTable." INDEX { frDteIndex } ::= { frDteCidDataTable 1 } FrDteCidDataEntry ::= SEQUENCE { frDteCustomerIdentifier Unsigned32 } frDteCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { frDteCidDataEntry 1 } frDteIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { frDte 21 } frDteIfEntryEntry OBJECT-TYPE SYNTAX FrDteIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteIfEntryTable." INDEX { frDteIndex } ::= { frDteIfEntryTable 1 } FrDteIfEntryEntry ::= SEQUENCE { frDteIfAdminStatus INTEGER, frDteIfIndex InterfaceIndex } frDteIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { frDteIfEntryEntry 1 } frDteIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { frDteIfEntryEntry 2 } frDteProvTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for the FrDte component." ::= { frDte 22 } frDteProvEntry OBJECT-TYPE SYNTAX FrDteProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteProvTable." INDEX { frDteIndex } ::= { frDteProvTable 1 } FrDteProvEntry ::= SEQUENCE { frDteAcceptUndefinedDlci INTEGER } frDteAcceptUndefinedDlci OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows previously undefined Data Link Connection Identifiers (DLCIs) to be dynamically accepted in the default remote group. If set to enabled, undefined DLCIs will be accepted, if disabled, they will not." DEFVAL { enabled } ::= { frDteProvEntry 1 } frDteStateTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { frDte 23 } frDteStateEntry OBJECT-TYPE SYNTAX FrDteStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteStateTable." INDEX { frDteIndex } ::= { frDteStateTable 1 } FrDteStateEntry ::= SEQUENCE { frDteAdminState INTEGER, frDteOperationalState INTEGER, frDteUsageState INTEGER } frDteAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { frDteStateEntry 1 } frDteOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { frDteStateEntry 2 } frDteUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { frDteStateEntry 3 } frDteOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { frDte 24 } frDteOperStatusEntry OBJECT-TYPE SYNTAX FrDteOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteOperStatusTable." INDEX { frDteIndex } ::= { frDteOperStatusTable 1 } FrDteOperStatusEntry ::= SEQUENCE { frDteSnmpOperStatus INTEGER } frDteSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { frDteOperStatusEntry 1 } frDteOperTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes for the FrDte component." ::= { frDte 25 } frDteOperEntry OBJECT-TYPE SYNTAX FrDteOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteOperTable." INDEX { frDteIndex } ::= { frDteOperTable 1 } FrDteOperEntry ::= SEQUENCE { frDteLinkOperState INTEGER } frDteLinkOperState OBJECT-TYPE SYNTAX INTEGER { active(1), down(2), polling(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute describes the operational state of the Link Control protocol. If the interface to the physical link hardware is inactive, the linkOperState is in the down state. The polling state only occurs when the Local Management Interface (LMI) is enabled and the physical link is active. The polling state indicates LMI is polling for its peer. Once communication is established the linkOperState will transition to the active state. If the procedure attribute of the Lmi component is set to none, linkOperState will transition to the active state once the physical link becomes active." DEFVAL { down } ::= { frDteOperEntry 1 } frDteErrTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteErrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the SNMP frErrEntry attributes for the FrDte component." ::= { frDte 26 } frDteErrEntry OBJECT-TYPE SYNTAX FrDteErrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteErrTable." INDEX { frDteIndex } ::= { frDteErrTable 1 } FrDteErrEntry ::= SEQUENCE { frDteErrType INTEGER, frDteErrData HexString, frDteErrTime EnterpriseDateAndTime, frDteErrDiscards Counter32, frDteErrFaults Counter32, frDteErrFaultTime EnterpriseDateAndTime } frDteErrType OBJECT-TYPE SYNTAX INTEGER { unknownError(1), receiveShort(2), receiveLong(3), illegalDlci(4), dlcmiProtoErr(5), dlcmiUnknownIe(6), dlcmiSequenceErr(7), dlcmiUnknownRpt(8), noErrorSinceReset(9) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of error that was last seen on this interface. The error types are as follows: receiveShort: This error indicates a received frame was discarded because it was less than four octets long or it was missing the Organizationally Unique Identifier (OUI) for a SNAP header. receiveLong: This error indicates a received frame was discarded because it was longer than expected. This error is currently not used on this interface. illegalDlci: This error indicates that a received frame was discarded because it's Q.922 address was not two octets in length. This error could also indicate that a frame was discarded because it was received on a DLCI reserved for LMI which had not been provisioned active. dlcmiProtoErr: This error indicates an LMI frame was received with contents formatted incorrectly. dlcmiUnknownIe: This error indicates that an LMI frame was received which contained an unsupported Information Element (IE) type dlcmiSequenceErr: This error indicates that an LMI frame was received whose Keep Alive Sequence was incorrect. dlcmiUnknownRpt: This error indicates that an LMI frame was received which contained a Report-type Information Element with an invalid type of report. noErrorSinceReset: This error type indicates that there has not been an error since the interface has been reset. unknownError: This error type contains the cumulation of receive frame errors that did not fit one of the MIB error descriptions above. These errors include those counted by the following attributes: ulpUnknownProtocol - A received frame was discarded because the Upper Level Protocol (ULP) encapsulation used was unsupported. badFc - A received frame was discarded because the frame control character was incorrect. defragSequenceErrors - A fragment was received which was discarded due to an out of sequence error detection." DEFVAL { noErrorSinceReset } ::= { frDteErrEntry 2 } frDteErrData OBJECT-TYPE SYNTAX HexString (SIZE (64)) ACCESS read-only STATUS mandatory DESCRIPTION "An octet string containing the first part of the frame in which an error was last detected." ::= { frDteErrEntry 3 } frDteErrTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "The time at which the last error was detected and recorded in errType." ::= { frDteErrEntry 4 } frDteErrDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of inbound frames dropped because of format errors or because the virtual circuit was not known. Format errors, in this case, are any errors which would prevent the system from recognizing the DLCI and placing the error in the discard category. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrEntry 6 } frDteErrFaults OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times LMI has taken down the interface. When the procedure attribute of the Lmi component is set to none, this counter will not be incremented. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrEntry 7 } frDteErrFaultTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "The last time the errFaults counter was incremented." ::= { frDteErrEntry 8 } frDteErrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteErrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains error counters for the FrDte." ::= { frDte 27 } frDteErrStatsEntry OBJECT-TYPE SYNTAX FrDteErrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteErrStatsTable." INDEX { frDteIndex } ::= { frDteErrStatsTable 1 } FrDteErrStatsEntry ::= SEQUENCE { frDteXmitDiscardPvcDown Counter32, frDteXmitDiscardLmiInactive Counter32, frDteXmitDiscardFramerDown Counter32, frDteXmitDiscardPvcInactive Counter32, frDteXmitDiscardCirExceeded Counter32, frDteRecvDiscardPvcDown Counter32, frDteRecvDiscardLmiInactive Counter32, frDteRecvDiscardPvcInactive Counter32, frDteBadFc Counter32, frDteUlpUnknownProtocol Counter32, frDteDefragSequenceErrors Counter32, frDteReceiveShort Counter32, frDteIllegalDlci Counter32, frDteDlcmiProtoErr Counter32, frDteDlcmiUnknownIe Counter32, frDteDlcmiSequenceErr Counter32, frDteDlcmiUnknownRpt Counter32 } frDteXmitDiscardPvcDown OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of transmitted frames discarded because the Dlci or a component positioned in a hierarchically fashion above it (e.g. it's remote group or the FrDte component) was administratively disabled. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 1 } frDteXmitDiscardLmiInactive OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of transmitted frames discarded because the Local Management Interface (LMI) was not yet active (i.e. LMI was still in the polling state). This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 2 } frDteXmitDiscardFramerDown OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of transmitted frames discarded because the framer component was down. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 3 } frDteXmitDiscardPvcInactive OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of transmitted frames discarded because the Local Management Interface (LMI) had inactivated or invalidated the Dlci. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 4 } frDteXmitDiscardCirExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of transmitted frames discarded because CIR was enabled on a Dlci without a HibernationQueue subcomponent and the traffic exceeded the combined Committed and Excess Burst thresholds. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 5 } frDteRecvDiscardPvcDown OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of received frames discarded because the Dlci or a component positioned in a hierarchically fashion above it (e.g. it's remote group or the FrDte component) was administratively disabled. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 6 } frDteRecvDiscardLmiInactive OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of received frames discarded because the Local Management Interface (LMI) was not yet active (i.e. LMI was still in the polling state). This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 7 } frDteRecvDiscardPvcInactive OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of received frames discarded because the Local Management Interface (LMI) had inactivated or invalidated the Dlci. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 8 } frDteBadFc OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of received frames discarded because the frame control character was incorrect. This may indicate that the other side of the link is configured for a different link level protocol. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 9 } frDteUlpUnknownProtocol OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of received frames discarded because the Upper Level Protocol (ULP) encapsulation used was unsupported. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 10 } frDteDefragSequenceErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of fragments received which were discarded due to out of sequence error detection. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 11 } frDteReceiveShort OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of received frames (including LMI frames) discarded because they were less than four octets long or they were missing the Organizationally Unique Identifier (OUI) for a SNAP header. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 12 } frDteIllegalDlci OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of received frames discarded because their Q.922 address was not two octets in length. This count also includes frames discarded because they were received on a Dlci reserved for LMI which had not been provisioned active. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 13 } frDteDlcmiProtoErr OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of received LMI frames whose contents were formatted incorrectly. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 14 } frDteDlcmiUnknownIe OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of received LMI frames which contained an unsupported Information Element (IE) type. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 15 } frDteDlcmiSequenceErr OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of received LMI frames whose Keep Alive Sequence was incorrect. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 16 } frDteDlcmiUnknownRpt OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Count of received LMI frames which contained a Report-type Information Element with an invalid type of report. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteErrStatsEntry 17 } -- -- FrDte/n Framer -- -- The Framer component controls link layer framing for application -- components sending and receiving data on a link interface. It is also -- through Framer, that an application component is associated with a -- specific hardware link interface. -- -- The Framer component provides provisional attributes related to -- datapath aspects of the hardware interface (such as crc and frame length) -- rather than interface specific attributes (such as modem leads and -- clocking) which are associated with specific hardware components (such -- as V35/n or DS1/n). The Framer component also provides a provisional -- attribute which binds the application component to a specific hardware -- component. -- -- The Framer component contains operational attributes for link interface -- datapath statistics (such as frame counts and aborts). -- frDteFramer OBJECT IDENTIFIER ::= { frDte 2 } frDteFramerRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of frDteFramer components." ::= { frDteFramer 1 } frDteFramerRowStatusEntry OBJECT-TYPE SYNTAX FrDteFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single frDteFramer component." INDEX { frDteIndex, frDteFramerIndex } ::= { frDteFramerRowStatusTable 1 } FrDteFramerRowStatusEntry ::= SEQUENCE { frDteFramerRowStatus RowStatus, frDteFramerComponentName DisplayString, frDteFramerStorageType StorageType, frDteFramerIndex NonReplicated } frDteFramerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of frDteFramer components. These components can be added and deleted." ::= { frDteFramerRowStatusEntry 1 } frDteFramerComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { frDteFramerRowStatusEntry 2 } frDteFramerStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the frDteFramer tables." ::= { frDteFramerRowStatusEntry 4 } frDteFramerIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the frDteFramer tables." ::= { frDteFramerRowStatusEntry 10 } frDteFramerProvTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisional Framer groups." ::= { frDteFramer 10 } frDteFramerProvEntry OBJECT-TYPE SYNTAX FrDteFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteFramerProvTable." INDEX { frDteIndex, frDteFramerIndex } ::= { frDteFramerProvTable 1 } FrDteFramerProvEntry ::= SEQUENCE { frDteFramerInterfaceName Link } frDteFramerInterfaceName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run." ::= { frDteFramerProvEntry 1 } frDteFramerStateTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { frDteFramer 12 } frDteFramerStateEntry OBJECT-TYPE SYNTAX FrDteFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteFramerStateTable." INDEX { frDteIndex, frDteFramerIndex } ::= { frDteFramerStateTable 1 } FrDteFramerStateEntry ::= SEQUENCE { frDteFramerAdminState INTEGER, frDteFramerOperationalState INTEGER, frDteFramerUsageState INTEGER } frDteFramerAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { frDteFramerStateEntry 1 } frDteFramerOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { frDteFramerStateEntry 2 } frDteFramerUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { frDteFramerStateEntry 3 } frDteFramerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational statistics data for a Framer component." ::= { frDteFramer 13 } frDteFramerStatsEntry OBJECT-TYPE SYNTAX FrDteFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteFramerStatsTable." INDEX { frDteIndex, frDteFramerIndex } ::= { frDteFramerStatsTable 1 } FrDteFramerStatsEntry ::= SEQUENCE { frDteFramerFrmToIf Counter32, frDteFramerFrmFromIf Counter32, frDteFramerAborts Counter32, frDteFramerCrcErrors Counter32, frDteFramerLrcErrors Counter32, frDteFramerNonOctetErrors Counter32, frDteFramerOverruns Counter32, frDteFramerUnderruns Counter32, frDteFramerLargeFrmErrors Counter32 } frDteFramerFrmToIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component." ::= { frDteFramerStatsEntry 1 } frDteFramerFrmFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames received from the link interface by Framer." ::= { frDteFramerStatsEntry 2 } frDteFramerAborts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of aborts received." ::= { frDteFramerStatsEntry 3 } frDteFramerCrcErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames with CRC errors." ::= { frDteFramerStatsEntry 4 } frDteFramerLrcErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames with LRC errors." ::= { frDteFramerStatsEntry 5 } frDteFramerNonOctetErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames that were non octet aligned." ::= { frDteFramerStatsEntry 6 } frDteFramerOverruns OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames received from the link for which overruns occurred." ::= { frDteFramerStatsEntry 7 } frDteFramerUnderruns OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames transmitted to the link for which underruns occurred." ::= { frDteFramerStatsEntry 8 } frDteFramerLargeFrmErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames received which were too large. The frame exceeded the maximumFrameLengthLimit provisioned attribute or it contained more than the 255 block hardware limit." ::= { frDteFramerStatsEntry 9 } frDteFramerUtilTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteFramerUtilEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the link utilization operational data for a Framer component." ::= { frDteFramer 14 } frDteFramerUtilEntry OBJECT-TYPE SYNTAX FrDteFramerUtilEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteFramerUtilTable." INDEX { frDteIndex, frDteFramerIndex } ::= { frDteFramerUtilTable 1 } FrDteFramerUtilEntry ::= SEQUENCE { frDteFramerNormPrioLinkUtilToIf Gauge32, frDteFramerNormPrioLinkUtilFromIf Gauge32 } frDteFramerNormPrioLinkUtilToIf OBJECT-TYPE SYNTAX Gauge32 (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the utilization of the normal priority data sent to the link as a percentage of the available bandwidth on the link. The utilization is the average for the last minute." DEFVAL { 0 } ::= { frDteFramerUtilEntry 1 } frDteFramerNormPrioLinkUtilFromIf OBJECT-TYPE SYNTAX Gauge32 (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the utilization of the normal priority data received from the link as a percentage of the available bandwidth on the link. The utilization is the average for the last minute." DEFVAL { 0 } ::= { frDteFramerUtilEntry 3 } -- FrDte/n Lmi -- This component defines parameters for implementing the Local -- Management Interface (LMI) protocol for the FrDte interface. frDteLmi OBJECT IDENTIFIER ::= { frDte 3 } frDteLmiRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteLmiRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of frDteLmi components." ::= { frDteLmi 1 } frDteLmiRowStatusEntry OBJECT-TYPE SYNTAX FrDteLmiRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single frDteLmi component." INDEX { frDteIndex, frDteLmiIndex } ::= { frDteLmiRowStatusTable 1 } FrDteLmiRowStatusEntry ::= SEQUENCE { frDteLmiRowStatus RowStatus, frDteLmiComponentName DisplayString, frDteLmiStorageType StorageType, frDteLmiIndex NonReplicated } frDteLmiRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of frDteLmi components. These components cannot be added nor deleted." ::= { frDteLmiRowStatusEntry 1 } frDteLmiComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { frDteLmiRowStatusEntry 2 } frDteLmiStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the frDteLmi tables." ::= { frDteLmiRowStatusEntry 4 } frDteLmiIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the frDteLmi tables." ::= { frDteLmiRowStatusEntry 10 } frDteLmiProvTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteLmiProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for the Lmi component." ::= { frDteLmi 10 } frDteLmiProvEntry OBJECT-TYPE SYNTAX FrDteLmiProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteLmiProvTable." INDEX { frDteIndex, frDteLmiIndex } ::= { frDteLmiProvTable 1 } FrDteLmiProvEntry ::= SEQUENCE { frDteLmiProcedures INTEGER, frDteLmiPollingInterval Unsigned32, frDteLmiFullEnquiryInterval Unsigned32, frDteLmiErrorThreshold Unsigned32, frDteLmiMonitoredEvents Unsigned32 } frDteLmiProcedures OBJECT-TYPE SYNTAX INTEGER { none(1), vendorForum(2), ansi(3), itu(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute selects the Local Management Interface (LMI) protocol to be used on the interface. This attribute is equivalent to the SNMP variable frDlcmiState. The vendorForum LMI protocol automatically implies that the DLCI used by the protocol is 1023. The ansi (T1.617 Annex D) and itu (ITU-T Recommendation Q.933 Annex A) LMI protocols use DLCI 0. If none is selected, no LMI procedures will run on the interface. Note that the ITU-T Recommendation Q.933 was previously a CCITT recommendation." DEFVAL { itu } ::= { frDteLmiProvEntry 1 } frDteLmiPollingInterval OBJECT-TYPE SYNTAX Unsigned32 (5..30) ACCESS read-write STATUS mandatory DESCRIPTION "This is the number of seconds between successive status enquiry messages. This field corresponds to the parameter T391 described in the ANSI T1.617-1991 Annex D." DEFVAL { 10 } ::= { frDteLmiProvEntry 4 } frDteLmiFullEnquiryInterval OBJECT-TYPE SYNTAX Unsigned32 (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The count of status polls before a full status enquiry message is issued. Every nth poll will request a full status. This field corresponds to the parameter N391 described in the ANSI T1.617-1991 Annex D." DEFVAL { 6 } ::= { frDteLmiProvEntry 5 } frDteLmiErrorThreshold OBJECT-TYPE SYNTAX Unsigned32 (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "The number of errors detected within the monitored events window before declaring the link non-functional. This field corresponds to the parameter N392 described in the ANSI T1.617-1991 Annex D." DEFVAL { 3 } ::= { frDteLmiProvEntry 6 } frDteLmiMonitoredEvents OBJECT-TYPE SYNTAX Unsigned32 (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "The number of status polling intervals over which the errorthreshold is counted This is used to determine if the errorThreshold is exceeded. This field corresponds to the parameter N393 described in the ANSI T1.617-1991 Annex D." DEFVAL { 4 } ::= { frDteLmiProvEntry 7 } frDteLmiOperTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteLmiOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes for the Lmi component." ::= { frDteLmi 11 } frDteLmiOperEntry OBJECT-TYPE SYNTAX FrDteLmiOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteLmiOperTable." INDEX { frDteIndex, frDteLmiIndex } ::= { frDteLmiOperTable 1 } FrDteLmiOperEntry ::= SEQUENCE { frDteLmiLmiStatus INTEGER } frDteLmiLmiStatus OBJECT-TYPE SYNTAX INTEGER { running(1), fault(2), initializing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the status of the Frame Relay interface as determined by the performance of the link management interface (LMI). If no LMI is running, lmiStatus will stay in the running state indefinitely." ::= { frDteLmiOperEntry 2 } -- FrDte/n Rg/n -- -- This component describes the links between a group of Dlcis and a -- Protocol Port. -- -- The Rg/1 instance is required. frDteRg OBJECT IDENTIFIER ::= { frDte 4 } frDteRgRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteRgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of frDteRg components." ::= { frDteRg 1 } frDteRgRowStatusEntry OBJECT-TYPE SYNTAX FrDteRgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single frDteRg component." INDEX { frDteIndex, frDteRgIndex } ::= { frDteRgRowStatusTable 1 } FrDteRgRowStatusEntry ::= SEQUENCE { frDteRgRowStatus RowStatus, frDteRgComponentName DisplayString, frDteRgStorageType StorageType, frDteRgIndex Integer32 } frDteRgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of frDteRg components. These components can be added and deleted." ::= { frDteRgRowStatusEntry 1 } frDteRgComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { frDteRgRowStatusEntry 2 } frDteRgStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the frDteRg tables." ::= { frDteRgRowStatusEntry 4 } frDteRgIndex OBJECT-TYPE SYNTAX Integer32 (1..256) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the frDteRg tables." ::= { frDteRgRowStatusEntry 10 } frDteRgIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteRgIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { frDteRg 10 } frDteRgIfEntryEntry OBJECT-TYPE SYNTAX FrDteRgIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteRgIfEntryTable." INDEX { frDteIndex, frDteRgIndex } ::= { frDteRgIfEntryTable 1 } FrDteRgIfEntryEntry ::= SEQUENCE { frDteRgIfAdminStatus INTEGER, frDteRgIfIndex InterfaceIndex } frDteRgIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { frDteRgIfEntryEntry 1 } frDteRgIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { frDteRgIfEntryEntry 2 } frDteRgProvTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteRgProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for the Remote Group component." ::= { frDteRg 11 } frDteRgProvEntry OBJECT-TYPE SYNTAX FrDteRgProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteRgProvTable." INDEX { frDteIndex, frDteRgIndex } ::= { frDteRgProvTable 1 } FrDteRgProvEntry ::= SEQUENCE { frDteRgMaxTransmissionUnit Unsigned32 } frDteRgMaxTransmissionUnit OBJECT-TYPE SYNTAX Unsigned32 (262..9190) ACCESS read-write STATUS mandatory DESCRIPTION "The Maximum Transmission Unit size of the largest datagram (including Frame Relay header) which can be sent on the interface." DEFVAL { 1604 } ::= { frDteRgProvEntry 1 } frDteRgMpTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteRgMpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the base provisioning data for the Media Application component." ::= { frDteRg 12 } frDteRgMpEntry OBJECT-TYPE SYNTAX FrDteRgMpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteRgMpTable." INDEX { frDteIndex, frDteRgIndex } ::= { frDteRgMpTable 1 } FrDteRgMpEntry ::= SEQUENCE { frDteRgLinkToProtocolPort Link } frDteRgLinkToProtocolPort OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a protocol port component name. The attribute associates the application with a protocol port." ::= { frDteRgMpEntry 1 } frDteRgStateTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteRgStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { frDteRg 13 } frDteRgStateEntry OBJECT-TYPE SYNTAX FrDteRgStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteRgStateTable." INDEX { frDteIndex, frDteRgIndex } ::= { frDteRgStateTable 1 } FrDteRgStateEntry ::= SEQUENCE { frDteRgAdminState INTEGER, frDteRgOperationalState INTEGER, frDteRgUsageState INTEGER } frDteRgAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { frDteRgStateEntry 1 } frDteRgOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { frDteRgStateEntry 2 } frDteRgUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { frDteRgStateEntry 3 } frDteRgOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteRgOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { frDteRg 14 } frDteRgOperStatusEntry OBJECT-TYPE SYNTAX FrDteRgOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteRgOperStatusTable." INDEX { frDteIndex, frDteRgIndex } ::= { frDteRgOperStatusTable 1 } FrDteRgOperStatusEntry ::= SEQUENCE { frDteRgSnmpOperStatus INTEGER } frDteRgSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { frDteRgOperStatusEntry 1 } frDteRgLtDlciTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteRgLtDlciEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute associates a Rg component with zero or more StDlci components. The Rg and StDlci components must be under the same FrDte component." ::= { frDteRg 219 } frDteRgLtDlciEntry OBJECT-TYPE SYNTAX FrDteRgLtDlciEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteRgLtDlciTable." INDEX { frDteIndex, frDteRgIndex, frDteRgLtDlciValue } ::= { frDteRgLtDlciTable 1 } FrDteRgLtDlciEntry ::= SEQUENCE { frDteRgLtDlciValue Link, frDteRgLtDlciRowStatus RowStatus } frDteRgLtDlciValue OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the frDteRgLtDlciTable." ::= { frDteRgLtDlciEntry 1 } frDteRgLtDlciRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the frDteRgLtDlciTable." ::= { frDteRgLtDlciEntry 2 } -- -- FrDte/n Rg/n Bridged Frame Routing -- -- The BridgedFrameRouting component defines the parameters for -- implementing the Bridged Frame Routing port. frDteRgBfr OBJECT IDENTIFIER ::= { frDteRg 15 } frDteRgBfrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteRgBfrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of frDteRgBfr components." ::= { frDteRgBfr 1 } frDteRgBfrRowStatusEntry OBJECT-TYPE SYNTAX FrDteRgBfrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single frDteRgBfr component." INDEX { frDteIndex, frDteRgIndex, frDteRgBfrIndex } ::= { frDteRgBfrRowStatusTable 1 } FrDteRgBfrRowStatusEntry ::= SEQUENCE { frDteRgBfrRowStatus RowStatus, frDteRgBfrComponentName DisplayString, frDteRgBfrStorageType StorageType, frDteRgBfrIndex NonReplicated } frDteRgBfrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of frDteRgBfr components. These components can be added and deleted." ::= { frDteRgBfrRowStatusEntry 1 } frDteRgBfrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { frDteRgBfrRowStatusEntry 2 } frDteRgBfrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the frDteRgBfr tables." ::= { frDteRgBfrRowStatusEntry 4 } frDteRgBfrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the frDteRgBfr tables." ::= { frDteRgBfrRowStatusEntry 10 } frDteRgBfrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteRgBfrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioning attributes for the Bfr component." ::= { frDteRgBfr 10 } frDteRgBfrProvEntry OBJECT-TYPE SYNTAX FrDteRgBfrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteRgBfrProvTable." INDEX { frDteIndex, frDteRgIndex, frDteRgBfrIndex } ::= { frDteRgBfrProvTable 1 } FrDteRgBfrProvEntry ::= SEQUENCE { frDteRgBfrMacType INTEGER, frDteRgBfrBfrIndex INTEGER } frDteRgBfrMacType OBJECT-TYPE SYNTAX INTEGER { fddi(0), enet(1), tokenRing(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the MAC address type of the Bfr component. The value must be chosen based on the media of the traffic source. For traffic originated from FDDI, use fddi; for ethernet, use enet; for token ring, use tokenRing" DEFVAL { enet } ::= { frDteRgBfrProvEntry 1 } frDteRgBfrBfrIndex OBJECT-TYPE SYNTAX INTEGER (0..511) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the value which is used to derive a unique MAC address for the Bfr. The bfrIndex must be unique across all Bfrs on the same Lp." ::= { frDteRgBfrProvEntry 2 } frDteRgBfrOprTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteRgBfrOprEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes for the Bfr component.." ::= { frDteRgBfr 11 } frDteRgBfrOprEntry OBJECT-TYPE SYNTAX FrDteRgBfrOprEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteRgBfrOprTable." INDEX { frDteIndex, frDteRgIndex, frDteRgBfrIndex } ::= { frDteRgBfrOprTable 1 } FrDteRgBfrOprEntry ::= SEQUENCE { frDteRgBfrMacAddr DashedHexString } frDteRgBfrMacAddr OBJECT-TYPE SYNTAX DashedHexString (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the unique MAC address of the Bfr component. This value is derived by the value of the attribute bfrIndex. The value is displayed as cannonical format." ::= { frDteRgBfrOprEntry 1 } -- FrDte/n DynDlciDefs -- This component defines the default values that will be used when a Dlci -- of creationType dynamic is created. frDteDynDlciDefs OBJECT IDENTIFIER ::= { frDte 5 } frDteDynDlciDefsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteDynDlciDefsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of frDteDynDlciDefs components." ::= { frDteDynDlciDefs 1 } frDteDynDlciDefsRowStatusEntry OBJECT-TYPE SYNTAX FrDteDynDlciDefsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single frDteDynDlciDefs component." INDEX { frDteIndex, frDteDynDlciDefsIndex } ::= { frDteDynDlciDefsRowStatusTable 1 } FrDteDynDlciDefsRowStatusEntry ::= SEQUENCE { frDteDynDlciDefsRowStatus RowStatus, frDteDynDlciDefsComponentName DisplayString, frDteDynDlciDefsStorageType StorageType, frDteDynDlciDefsIndex NonReplicated } frDteDynDlciDefsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of frDteDynDlciDefs components. These components cannot be added nor deleted." ::= { frDteDynDlciDefsRowStatusEntry 1 } frDteDynDlciDefsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { frDteDynDlciDefsRowStatusEntry 2 } frDteDynDlciDefsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the frDteDynDlciDefs tables." ::= { frDteDynDlciDefsRowStatusEntry 4 } frDteDynDlciDefsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the frDteDynDlciDefs tables." ::= { frDteDynDlciDefsRowStatusEntry 10 } frDteDynDlciDefsProvTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteDynDlciDefsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for a virtual circuit. These attributes represent the default settings for the resulting Dlci components and can be operationally changed using the corresponding attributes under the Dlci component." ::= { frDteDynDlciDefs 10 } frDteDynDlciDefsProvEntry OBJECT-TYPE SYNTAX FrDteDynDlciDefsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteDynDlciDefsProvTable." INDEX { frDteIndex, frDteDynDlciDefsIndex } ::= { frDteDynDlciDefsProvTable 1 } FrDteDynDlciDefsProvEntry ::= SEQUENCE { frDteDynDlciDefsStdRowStatus INTEGER, frDteDynDlciDefsRateEnforcement INTEGER, frDteDynDlciDefsCommittedInformationRate Unsigned32, frDteDynDlciDefsCommittedBurst Unsigned32, frDteDynDlciDefsExcessBurst Unsigned32, frDteDynDlciDefsExcessBurstAction INTEGER, frDteDynDlciDefsIpCos Unsigned32 } frDteDynDlciDefsStdRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to manage the status of a StDlci component. Set to active to enable the StDlci component. Set to notInService to disable the StDlci component. Set to createAndGo (SNMP only) to create a new StDlci component. Set to destroy (SNMP only) to delete an existing StDlci component." DEFVAL { active } ::= { frDteDynDlciDefsProvEntry 1 } frDteDynDlciDefsRateEnforcement OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the CIR attributes committedInformationRate, committedBurst, and excessBurst are used to define rate enforcement on this user DLCI. If rateEnforcement is enabled, and the combined Committed and Excess burst thresholds are exceeded, the frame in violation will be discarded immediately if a HibernationQueue subcomponent is not provisioned under the StDlci component. If a HibernationQueue is provisioned, the frame will be placed on the HibernationQueue at time of violation and transmission will be attempted later after the point at which the burst thresholds will no longer be exceeded. Setting all the CIR attributes to zero has the same affect as setting this attribute to disabled." DEFVAL { disabled } ::= { frDteDynDlciDefsProvEntry 2 } frDteDynDlciDefsCommittedInformationRate OBJECT-TYPE SYNTAX Unsigned32 (0..48000000) ACCESS read-write STATUS mandatory DESCRIPTION "The average number of bits to be transferred per second over the DLCI to the DCE. When this attribute is set to zero, the link speed will be used instead." DEFVAL { 64000 } ::= { frDteDynDlciDefsProvEntry 3 } frDteDynDlciDefsCommittedBurst OBJECT-TYPE SYNTAX Unsigned32 (0..2048000) ACCESS read-write STATUS mandatory DESCRIPTION "The committed burst size (in bits) to which the DLCI wants to subscribe." DEFVAL { 64000 } ::= { frDteDynDlciDefsProvEntry 4 } frDteDynDlciDefsExcessBurst OBJECT-TYPE SYNTAX Unsigned32 (0..2048000) ACCESS read-write STATUS mandatory DESCRIPTION "The excess burst size (in bits) to which the DLCI wants to subscribe." DEFVAL { 0 } ::= { frDteDynDlciDefsProvEntry 5 } frDteDynDlciDefsExcessBurstAction OBJECT-TYPE SYNTAX INTEGER { none(1), setDeBit(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the action taken when the committedBurst size has been exceeded on the DLCI but the excessBurst size has not. If the attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay header will be turned on. If the attribute is set to none, no action will be taken." DEFVAL { none } ::= { frDteDynDlciDefsProvEntry 6 } frDteDynDlciDefsIpCos OBJECT-TYPE SYNTAX Unsigned32 (0..3) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the initial Class of Service (CoS) given to each packet received on the on the virtual circuit identified by the dlci. The CoS value n is used to select Vr/<string> QosP/n. which determines the QualityofService-Profile to be used when the packet is forwarded. The intial CoS given to a packet by the assignedQoS attribute may be overriden when the cosPolicyAssignment attribute is defined on the IpPort or Ip components. When a packet is to be transmitted on a frDte protocol port where multiple virtual circuits are available for the packet's next hop, the packet is forwarded using the dlci where the ipCos value matches the CoS of the packet. When the packets's CoS does not match the ipCos value of any of the available virtual circuits, the packet will be forwarded using next lowest CoS; failing this, the packet will be forwarded using the next highest CoS." DEFVAL { 0 } ::= { frDteDynDlciDefsProvEntry 7 } -- FrDte/n StDlci/n -- This component is used to provision a static virtual circuit on the Frame -- Relay DTE interface. For each StDlci provisioned, there will be a -- matching Dlci component. Dlci components of creationType dynamic -- will be converted to static without disruption of service when a StDlci -- component is provisioned with the same instance number. frDteStDlci OBJECT IDENTIFIER ::= { frDte 6 } frDteStDlciRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteStDlciRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of frDteStDlci components." ::= { frDteStDlci 1 } frDteStDlciRowStatusEntry OBJECT-TYPE SYNTAX FrDteStDlciRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single frDteStDlci component." INDEX { frDteIndex, frDteStDlciIndex } ::= { frDteStDlciRowStatusTable 1 } FrDteStDlciRowStatusEntry ::= SEQUENCE { frDteStDlciRowStatus RowStatus, frDteStDlciComponentName DisplayString, frDteStDlciStorageType StorageType, frDteStDlciIndex Integer32 } frDteStDlciRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of frDteStDlci components. These components can be added and deleted." ::= { frDteStDlciRowStatusEntry 1 } frDteStDlciComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { frDteStDlciRowStatusEntry 2 } frDteStDlciStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the frDteStDlci tables." ::= { frDteStDlciRowStatusEntry 4 } frDteStDlciIndex OBJECT-TYPE SYNTAX Integer32 (16..1007) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the frDteStDlci tables." ::= { frDteStDlciRowStatusEntry 10 } frDteStDlciProvTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteStDlciProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for a virtual circuit. These attributes represent the default settings for the resulting Dlci components and can be operationally changed using the corresponding attributes under the Dlci component." ::= { frDteStDlci 10 } frDteStDlciProvEntry OBJECT-TYPE SYNTAX FrDteStDlciProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteStDlciProvTable." INDEX { frDteIndex, frDteStDlciIndex } ::= { frDteStDlciProvTable 1 } FrDteStDlciProvEntry ::= SEQUENCE { frDteStDlciStdRowStatus INTEGER, frDteStDlciRateEnforcement INTEGER, frDteStDlciCommittedInformationRate Unsigned32, frDteStDlciCommittedBurst Unsigned32, frDteStDlciExcessBurst Unsigned32, frDteStDlciExcessBurstAction INTEGER, frDteStDlciIpCos Unsigned32 } frDteStDlciStdRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to manage the status of a StDlci component. Set to active to enable the StDlci component. Set to notInService to disable the StDlci component. Set to createAndGo (SNMP only) to create a new StDlci component. Set to destroy (SNMP only) to delete an existing StDlci component." DEFVAL { active } ::= { frDteStDlciProvEntry 1 } frDteStDlciRateEnforcement OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the CIR attributes committedInformationRate, committedBurst, and excessBurst are used to define rate enforcement on this user DLCI. If rateEnforcement is enabled, and the combined Committed and Excess burst thresholds are exceeded, the frame in violation will be discarded immediately if a HibernationQueue subcomponent is not provisioned under the StDlci component. If a HibernationQueue is provisioned, the frame will be placed on the HibernationQueue at time of violation and transmission will be attempted later after the point at which the burst thresholds will no longer be exceeded. Setting all the CIR attributes to zero has the same affect as setting this attribute to disabled." DEFVAL { disabled } ::= { frDteStDlciProvEntry 2 } frDteStDlciCommittedInformationRate OBJECT-TYPE SYNTAX Unsigned32 (0..48000000) ACCESS read-write STATUS mandatory DESCRIPTION "The average number of bits to be transferred per second over the DLCI to the DCE. When this attribute is set to zero, the link speed will be used instead." DEFVAL { 64000 } ::= { frDteStDlciProvEntry 3 } frDteStDlciCommittedBurst OBJECT-TYPE SYNTAX Unsigned32 (0..2048000) ACCESS read-write STATUS mandatory DESCRIPTION "The committed burst size (in bits) to which the DLCI wants to subscribe." DEFVAL { 64000 } ::= { frDteStDlciProvEntry 4 } frDteStDlciExcessBurst OBJECT-TYPE SYNTAX Unsigned32 (0..2048000) ACCESS read-write STATUS mandatory DESCRIPTION "The excess burst size (in bits) to which the DLCI wants to subscribe." DEFVAL { 0 } ::= { frDteStDlciProvEntry 5 } frDteStDlciExcessBurstAction OBJECT-TYPE SYNTAX INTEGER { none(1), setDeBit(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the action taken when the committedBurst size has been exceeded on the DLCI but the excessBurst size has not. If the attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay header will be turned on. If the attribute is set to none, no action will be taken." DEFVAL { none } ::= { frDteStDlciProvEntry 6 } frDteStDlciIpCos OBJECT-TYPE SYNTAX Unsigned32 (0..3) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the initial Class of Service (CoS) given to each packet received on the on the virtual circuit identified by the dlci. The CoS value n is used to select Vr/<string> QosP/n. which determines the QualityofService-Profile to be used when the packet is forwarded. The intial CoS given to a packet by the assignedQoS attribute may be overriden when the cosPolicyAssignment attribute is defined on the IpPort or Ip components. When a packet is to be transmitted on a frDte protocol port where multiple virtual circuits are available for the packet's next hop, the packet is forwarded using the dlci where the ipCos value matches the CoS of the packet. When the packets's CoS does not match the ipCos value of any of the available virtual circuits, the packet will be forwarded using next lowest CoS; failing this, the packet will be forwarded using the next highest CoS." DEFVAL { 0 } ::= { frDteStDlciProvEntry 7 } frDteStDlciRgLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteStDlciRgLinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group provides the link between a Dlci and a remoteGroup." ::= { frDteStDlci 11 } frDteStDlciRgLinkEntry OBJECT-TYPE SYNTAX FrDteStDlciRgLinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteStDlciRgLinkTable." INDEX { frDteIndex, frDteStDlciIndex } ::= { frDteStDlciRgLinkTable 1 } FrDteStDlciRgLinkEntry ::= SEQUENCE { frDteStDlciLinkToRemoteGroup Link } frDteStDlciLinkToRemoteGroup OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute associates a StDlci component with a Rg component. Provisioned StDlci components must be linked to a Rg component which is under the same FrDte component." ::= { frDteStDlciRgLinkEntry 1 } -- FrDte/n StDlci/n Hq -- This component provides a Hibernation Queue capability for a Dlci -- component which has been provisioned with CIR enforcement enabled. -- The HibernationQueue provides priority placement of frames on the -- queue, Time To Live (TTL) discarding of frames from the queue, and -- queue statistics. frDteStDlciHq OBJECT IDENTIFIER ::= { frDteStDlci 2 } frDteStDlciHqRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteStDlciHqRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of frDteStDlciHq components." ::= { frDteStDlciHq 1 } frDteStDlciHqRowStatusEntry OBJECT-TYPE SYNTAX FrDteStDlciHqRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single frDteStDlciHq component." INDEX { frDteIndex, frDteStDlciIndex, frDteStDlciHqIndex } ::= { frDteStDlciHqRowStatusTable 1 } FrDteStDlciHqRowStatusEntry ::= SEQUENCE { frDteStDlciHqRowStatus RowStatus, frDteStDlciHqComponentName DisplayString, frDteStDlciHqStorageType StorageType, frDteStDlciHqIndex NonReplicated } frDteStDlciHqRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of frDteStDlciHq components. These components can be added and deleted." ::= { frDteStDlciHqRowStatusEntry 1 } frDteStDlciHqComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { frDteStDlciHqRowStatusEntry 2 } frDteStDlciHqStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the frDteStDlciHq tables." ::= { frDteStDlciHqRowStatusEntry 4 } frDteStDlciHqIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the frDteStDlciHq tables." ::= { frDteStDlciHqRowStatusEntry 10 } frDteStDlciHqProvTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteStDlciHqProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the Link Emission Queue provisioned attributes." ::= { frDteStDlciHq 10 } frDteStDlciHqProvEntry OBJECT-TYPE SYNTAX FrDteStDlciHqProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteStDlciHqProvTable." INDEX { frDteIndex, frDteStDlciIndex, frDteStDlciHqIndex } ::= { frDteStDlciHqProvTable 1 } FrDteStDlciHqProvEntry ::= SEQUENCE { frDteStDlciHqMaxPackets Unsigned32, frDteStDlciHqMaxMsecData Unsigned32, frDteStDlciHqMaxPercentMulticast Unsigned32, frDteStDlciHqTimeToLive Unsigned32 } frDteStDlciHqMaxPackets OBJECT-TYPE SYNTAX Unsigned32 (0..2048) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of packets allowed in the Leq before being discarded. If this attribute is set to zero then the maximum number of packets is calculated from the transmit data rate. This calculated value is placed in queuePktThreshold." DEFVAL { 0 } ::= { frDteStDlciHqProvEntry 1 } frDteStDlciHqMaxMsecData OBJECT-TYPE SYNTAX Unsigned32 (100..60000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of 'Milliseconds worth of data' allowed in the Leq before packets are discarded. The queueByteThreshold will be calculated from this attribute, based on the transmit data rate." DEFVAL { 10000 } ::= { frDteStDlciHqProvEntry 2 } frDteStDlciHqMaxPercentMulticast OBJECT-TYPE SYNTAX Unsigned32 (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum percentage of multicast packets allowed in the Leq, based on queuePktThreshold, before being discarded. The calculated value will be placed in queueMulticastThreshold." DEFVAL { 50 } ::= { frDteStDlciHqProvEntry 3 } frDteStDlciHqTimeToLive OBJECT-TYPE SYNTAX Unsigned32 (100..60000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the 'Milliseconds Time To Live' of packets in the Leq. If the timeToLive of a packet expires, it will be discarded." DEFVAL { 10000 } ::= { frDteStDlciHqProvEntry 4 } frDteStDlciHqStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteStDlciHqStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains HibernationQueue general statistics." ::= { frDteStDlciHq 11 } frDteStDlciHqStatsEntry OBJECT-TYPE SYNTAX FrDteStDlciHqStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteStDlciHqStatsTable." INDEX { frDteIndex, frDteStDlciIndex, frDteStDlciHqIndex } ::= { frDteStDlciHqStatsTable 1 } FrDteStDlciHqStatsEntry ::= SEQUENCE { frDteStDlciHqTimedOutPkt Counter32, frDteStDlciHqQueuePurgeDiscards Counter32 } frDteStDlciHqTimedOutPkt OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets that have been discarded due to exceeding the timeToLive. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteStDlciHqStatsEntry 1 } frDteStDlciHqQueuePurgeDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets discarded by a queue purge which occurs when the Dlci goes down. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteStDlciHqStatsEntry 2 } frDteStDlciHqTStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteStDlciHqTStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains Link Emission Queue total statistics." ::= { frDteStDlciHq 12 } frDteStDlciHqTStatsEntry OBJECT-TYPE SYNTAX FrDteStDlciHqTStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteStDlciHqTStatsTable." INDEX { frDteIndex, frDteStDlciIndex, frDteStDlciHqIndex } ::= { frDteStDlciHqTStatsTable 1 } FrDteStDlciHqTStatsEntry ::= SEQUENCE { frDteStDlciHqTotalPktHandled Counter32, frDteStDlciHqTotalPktForwarded Counter32, frDteStDlciHqTotalPktQueued Counter32, frDteStDlciHqTotalMulticastPkt Counter32, frDteStDlciHqTotalPktDiscards Counter32 } frDteStDlciHqTotalPktHandled OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets handled by the Leq. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteStDlciHqTStatsEntry 1 } frDteStDlciHqTotalPktForwarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets forwarded by the Leq. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteStDlciHqTStatsEntry 2 } frDteStDlciHqTotalPktQueued OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets that required queuing by the Leq due to transmit congestion. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteStDlciHqTStatsEntry 3 } frDteStDlciHqTotalMulticastPkt OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of multicast packets handled by this instance of FrDte. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteStDlciHqTStatsEntry 4 } frDteStDlciHqTotalPktDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets that were discarded for this instance of FrDte. This is the sum of timedOutPkt, forcedPktDiscards, queuePurgeDiscards, pktThresholdExceeded, byteThresholdExceeded, mulThresholdExceeded and memThresholdExceeded. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteStDlciHqTStatsEntry 5 } frDteStDlciHqCStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteStDlciHqCStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains Link Emission Queue current statistics." ::= { frDteStDlciHq 13 } frDteStDlciHqCStatsEntry OBJECT-TYPE SYNTAX FrDteStDlciHqCStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteStDlciHqCStatsTable." INDEX { frDteIndex, frDteStDlciIndex, frDteStDlciHqIndex } ::= { frDteStDlciHqCStatsTable 1 } FrDteStDlciHqCStatsEntry ::= SEQUENCE { frDteStDlciHqCurrentPktQueued Gauge32, frDteStDlciHqCurrentBytesQueued Gauge32, frDteStDlciHqCurrentMulticastQueued Gauge32 } frDteStDlciHqCurrentPktQueued OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the current number of packets queued." DEFVAL { 0 } ::= { frDteStDlciHqCStatsEntry 1 } frDteStDlciHqCurrentBytesQueued OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the current number of bytes queued." DEFVAL { 0 } ::= { frDteStDlciHqCStatsEntry 2 } frDteStDlciHqCurrentMulticastQueued OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the current number of multicast packets in the queue." DEFVAL { 0 } ::= { frDteStDlciHqCStatsEntry 3 } frDteStDlciHqThrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteStDlciHqThrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains Link Emission Queue threshold statistics." ::= { frDteStDlciHq 14 } frDteStDlciHqThrStatsEntry OBJECT-TYPE SYNTAX FrDteStDlciHqThrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteStDlciHqThrStatsTable." INDEX { frDteIndex, frDteStDlciIndex, frDteStDlciHqIndex } ::= { frDteStDlciHqThrStatsTable 1 } FrDteStDlciHqThrStatsEntry ::= SEQUENCE { frDteStDlciHqQueuePktThreshold Unsigned32, frDteStDlciHqPktThresholdExceeded Counter32, frDteStDlciHqQueueByteThreshold Unsigned32, frDteStDlciHqByteThresholdExceeded Counter32, frDteStDlciHqQueueMulticastThreshold Unsigned32, frDteStDlciHqMulThresholdExceeded Counter32, frDteStDlciHqMemThresholdExceeded Counter32 } frDteStDlciHqQueuePktThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the maximum number of packets that can be contained in the queue before being discarded. If maxPackets was set to 0 then this attribute will contain the value that has been calculated based on the transmit data rate. If maxPackets was set to one or more than this attribute will contain that number." DEFVAL { 0 } ::= { frDteStDlciHqThrStatsEntry 1 } frDteStDlciHqPktThresholdExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets discarded due to the queuePktThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteStDlciHqThrStatsEntry 2 } frDteStDlciHqQueueByteThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the maximum number of bytes allowed in the queue based on maxMsecData and the transmit data rate." DEFVAL { 0 } ::= { frDteStDlciHqThrStatsEntry 3 } frDteStDlciHqByteThresholdExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets discarded due to the queueByteThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteStDlciHqThrStatsEntry 4 } frDteStDlciHqQueueMulticastThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of multicast packets allowed in the queue based on maxPercentMulticast and maxPackets." DEFVAL { 0 } ::= { frDteStDlciHqThrStatsEntry 5 } frDteStDlciHqMulThresholdExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets discarded due to the queueMulticastThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteStDlciHqThrStatsEntry 6 } frDteStDlciHqMemThresholdExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets discarded due to exceeding the memory usage threshold for Leq. The memory usage threshold is determined by the Leq software, guaranteeing that the Leq does not consume all of the memory. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteStDlciHqThrStatsEntry 7 } -- FrDte/n Leq -- This component provides a means of statistics gathering and packet -- discard. frDteLeq OBJECT IDENTIFIER ::= { frDte 7 } frDteLeqRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteLeqRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of frDteLeq components." ::= { frDteLeq 1 } frDteLeqRowStatusEntry OBJECT-TYPE SYNTAX FrDteLeqRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single frDteLeq component." INDEX { frDteIndex, frDteLeqIndex } ::= { frDteLeqRowStatusTable 1 } FrDteLeqRowStatusEntry ::= SEQUENCE { frDteLeqRowStatus RowStatus, frDteLeqComponentName DisplayString, frDteLeqStorageType StorageType, frDteLeqIndex NonReplicated } frDteLeqRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of frDteLeq components. These components can be added and deleted." ::= { frDteLeqRowStatusEntry 1 } frDteLeqComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { frDteLeqRowStatusEntry 2 } frDteLeqStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the frDteLeq tables." ::= { frDteLeqRowStatusEntry 4 } frDteLeqIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the frDteLeq tables." ::= { frDteLeqRowStatusEntry 10 } frDteLeqProvTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteLeqProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the Link Emission Queue provisioned attributes." ::= { frDteLeq 10 } frDteLeqProvEntry OBJECT-TYPE SYNTAX FrDteLeqProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteLeqProvTable." INDEX { frDteIndex, frDteLeqIndex } ::= { frDteLeqProvTable 1 } FrDteLeqProvEntry ::= SEQUENCE { frDteLeqMaxPackets Unsigned32, frDteLeqMaxMsecData Unsigned32, frDteLeqMaxPercentMulticast Unsigned32, frDteLeqTimeToLive Unsigned32 } frDteLeqMaxPackets OBJECT-TYPE SYNTAX Unsigned32 (0..2048) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of packets allowed in the Leq before being discarded. If this attribute is set to zero then the maximum number of packets is calculated from the transmit data rate. This calculated value is placed in queuePktThreshold." DEFVAL { 0 } ::= { frDteLeqProvEntry 1 } frDteLeqMaxMsecData OBJECT-TYPE SYNTAX Unsigned32 (100..60000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of 'Milliseconds worth of data' allowed in the Leq before packets are discarded. The queueByteThreshold will be calculated from this attribute, based on the transmit data rate." DEFVAL { 10000 } ::= { frDteLeqProvEntry 2 } frDteLeqMaxPercentMulticast OBJECT-TYPE SYNTAX Unsigned32 (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum percentage of multicast packets allowed in the Leq, based on queuePktThreshold, before being discarded. The calculated value will be placed in queueMulticastThreshold." DEFVAL { 50 } ::= { frDteLeqProvEntry 3 } frDteLeqTimeToLive OBJECT-TYPE SYNTAX Unsigned32 (100..60000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the 'Milliseconds Time To Live' of packets in the Leq. If the timeToLive of a packet expires, it will be discarded." DEFVAL { 10000 } ::= { frDteLeqProvEntry 4 } frDteLeqStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteLeqStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains Link Emission Queue general statistics." ::= { frDteLeq 11 } frDteLeqStatsEntry OBJECT-TYPE SYNTAX FrDteLeqStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteLeqStatsTable." INDEX { frDteIndex, frDteLeqIndex } ::= { frDteLeqStatsTable 1 } FrDteLeqStatsEntry ::= SEQUENCE { frDteLeqTimedOutPkt Counter32, frDteLeqHardwareForcedPkt Counter32, frDteLeqForcedPktDiscards Counter32, frDteLeqQueuePurgeDiscards Counter32 } frDteLeqTimedOutPkt OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets that have been discarded due to exceeding the timeToLive. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteLeqStatsEntry 1 } frDteLeqHardwareForcedPkt OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of hardware forced packets on this instance of FrDte. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteLeqStatsEntry 2 } frDteLeqForcedPktDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of hardware forced packets that had to be discarded due to link failure. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteLeqStatsEntry 3 } frDteLeqQueuePurgeDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets discarded by a queue purge (i.e. a discarding of all packets on the queue). This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteLeqStatsEntry 4 } frDteLeqTStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteLeqTStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains Link Emission Queue total statistics." ::= { frDteLeq 12 } frDteLeqTStatsEntry OBJECT-TYPE SYNTAX FrDteLeqTStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteLeqTStatsTable." INDEX { frDteIndex, frDteLeqIndex } ::= { frDteLeqTStatsTable 1 } FrDteLeqTStatsEntry ::= SEQUENCE { frDteLeqTotalPktHandled Counter32, frDteLeqTotalPktForwarded Counter32, frDteLeqTotalPktQueued Counter32, frDteLeqTotalMulticastPkt Counter32, frDteLeqTotalPktDiscards Counter32 } frDteLeqTotalPktHandled OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets handled by the Leq. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteLeqTStatsEntry 1 } frDteLeqTotalPktForwarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets forwarded by the Leq. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteLeqTStatsEntry 2 } frDteLeqTotalPktQueued OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets that required queuing by the Leq due to transmit congestion. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteLeqTStatsEntry 3 } frDteLeqTotalMulticastPkt OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of multicast packets handled by this instance of FrDte. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteLeqTStatsEntry 4 } frDteLeqTotalPktDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets that were discarded for this instance of FrDte. This is the sum of timedOutPkt, forcedPktDiscards, queuePurgeDiscards, pktThresholdExceeded, byteThresholdExceeded, mulThresholdExceeded and memThresholdExceeded. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteLeqTStatsEntry 5 } frDteLeqCStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteLeqCStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains Link Emission Queue current statistics." ::= { frDteLeq 13 } frDteLeqCStatsEntry OBJECT-TYPE SYNTAX FrDteLeqCStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteLeqCStatsTable." INDEX { frDteIndex, frDteLeqIndex } ::= { frDteLeqCStatsTable 1 } FrDteLeqCStatsEntry ::= SEQUENCE { frDteLeqCurrentPktQueued Gauge32, frDteLeqCurrentBytesQueued Gauge32, frDteLeqCurrentMulticastQueued Gauge32 } frDteLeqCurrentPktQueued OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the current number of packets queued." DEFVAL { 0 } ::= { frDteLeqCStatsEntry 1 } frDteLeqCurrentBytesQueued OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the current number of bytes queued." DEFVAL { 0 } ::= { frDteLeqCStatsEntry 2 } frDteLeqCurrentMulticastQueued OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the current number of multicast packets in the queue." DEFVAL { 0 } ::= { frDteLeqCStatsEntry 3 } frDteLeqThrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteLeqThrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains Link Emission Queue threshold statistics." ::= { frDteLeq 14 } frDteLeqThrStatsEntry OBJECT-TYPE SYNTAX FrDteLeqThrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteLeqThrStatsTable." INDEX { frDteIndex, frDteLeqIndex } ::= { frDteLeqThrStatsTable 1 } FrDteLeqThrStatsEntry ::= SEQUENCE { frDteLeqQueuePktThreshold Unsigned32, frDteLeqPktThresholdExceeded Counter32, frDteLeqQueueByteThreshold Unsigned32, frDteLeqByteThresholdExceeded Counter32, frDteLeqQueueMulticastThreshold Unsigned32, frDteLeqMulThresholdExceeded Counter32, frDteLeqMemThresholdExceeded Counter32 } frDteLeqQueuePktThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the maximum number of packets that can be contained in the queue before being discarded. If maxPackets was set to 0 then this attribute will contain the value that has been calculated based on the transmit data rate. If maxPackets was set to one or more than this attribute will contain that number." DEFVAL { 0 } ::= { frDteLeqThrStatsEntry 1 } frDteLeqPktThresholdExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets discarded due to the queuePktThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteLeqThrStatsEntry 2 } frDteLeqQueueByteThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the maximum number of bytes allowed in the queue based on maxMsecData and the transmit data rate." DEFVAL { 0 } ::= { frDteLeqThrStatsEntry 3 } frDteLeqByteThresholdExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets discarded due to the queueByteThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteLeqThrStatsEntry 4 } frDteLeqQueueMulticastThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of multicast packets allowed in the queue based on maxPercentMulticast and maxPackets." DEFVAL { 0 } ::= { frDteLeqThrStatsEntry 5 } frDteLeqMulThresholdExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets discarded due to the queueMulticastThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteLeqThrStatsEntry 6 } frDteLeqMemThresholdExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets discarded due to exceeding the memory usage threshold for Leq. The memory usage threshold is determined by the Leq software, guaranteeing that the Leq does not consume all of the memory. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteLeqThrStatsEntry 7 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- FrDte/n Dlci/n -- This component provides access to both static and dynamic virtual -- circuit instances. frDteDlci OBJECT IDENTIFIER ::= { frDte 8 } frDteDlciRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteDlciRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of frDteDlci components." ::= { frDteDlci 1 } frDteDlciRowStatusEntry OBJECT-TYPE SYNTAX FrDteDlciRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single frDteDlci component." INDEX { frDteIndex, frDteDlciIndex } ::= { frDteDlciRowStatusTable 1 } FrDteDlciRowStatusEntry ::= SEQUENCE { frDteDlciRowStatus RowStatus, frDteDlciComponentName DisplayString, frDteDlciStorageType StorageType, frDteDlciIndex Integer32 } frDteDlciRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of frDteDlci components. These components cannot be added nor deleted." ::= { frDteDlciRowStatusEntry 1 } frDteDlciComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { frDteDlciRowStatusEntry 2 } frDteDlciStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the frDteDlci tables." ::= { frDteDlciRowStatusEntry 4 } frDteDlciIndex OBJECT-TYPE SYNTAX Integer32 (0..1023) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the frDteDlci tables." ::= { frDteDlciRowStatusEntry 10 } frDteDlciStateTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteDlciStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { frDteDlci 10 } frDteDlciStateEntry OBJECT-TYPE SYNTAX FrDteDlciStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteDlciStateTable." INDEX { frDteIndex, frDteDlciIndex } ::= { frDteDlciStateTable 1 } FrDteDlciStateEntry ::= SEQUENCE { frDteDlciAdminState INTEGER, frDteDlciOperationalState INTEGER, frDteDlciUsageState INTEGER } frDteDlciAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { frDteDlciStateEntry 1 } frDteDlciOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { frDteDlciStateEntry 2 } frDteDlciUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { frDteDlciStateEntry 3 } frDteDlciOperTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteDlciOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes for the Dlci component." ::= { frDteDlci 11 } frDteDlciOperEntry OBJECT-TYPE SYNTAX FrDteDlciOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteDlciOperTable." INDEX { frDteIndex, frDteDlciIndex } ::= { frDteDlciOperTable 1 } FrDteDlciOperEntry ::= SEQUENCE { frDteDlciDlciState INTEGER, frDteDlciLastTimeChange EnterpriseDateAndTime, frDteDlciSentFrames Counter32, frDteDlciSentOctets Counter32, frDteDlciReceivedFrames Counter32, frDteDlciReceivedOctets Counter32, frDteDlciReceivedFECNs Counter32, frDteDlciReceivedBECNs Counter32, frDteDlciDiscardedFrames Counter32, frDteDlciCreationType INTEGER, frDteDlciCreationTime EnterpriseDateAndTime, frDteDlciRateEnforcement INTEGER, frDteDlciCommittedInformationRate Gauge32, frDteDlciCommittedBurst Unsigned32, frDteDlciExcessBurst Unsigned32, frDteDlciExcessBurstAction INTEGER } frDteDlciDlciState OBJECT-TYPE SYNTAX INTEGER { invalid(1), active(2), inactive(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute reflects the current operational circuit state of the Dlci. The state active indicates that the circuit is up and inactive that the circuit is down. The state invalid means the circuit has been deleted by the DCE (via Lmi)." DEFVAL { inactive } ::= { frDteDlciOperEntry 4 } frDteDlciLastTimeChange OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "The last time dlciState changed state." ::= { frDteDlciOperEntry 5 } frDteDlciSentFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames transmitted across the interface. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteDlciOperEntry 7 } frDteDlciSentOctets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets sent from this virtual circuit since it was created. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteDlciOperEntry 8 } frDteDlciReceivedFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames received across the interface. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteDlciOperEntry 9 } frDteDlciReceivedOctets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets sent from this virtual circuit since it was created. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteDlciOperEntry 10 } frDteDlciReceivedFECNs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames with the FECN bit set received from the network. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteDlciOperEntry 11 } frDteDlciReceivedBECNs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames with the BECN bit set received from the network. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteDlciOperEntry 12 } frDteDlciDiscardedFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound frames dropped because of format errors, or because the VC was inactive. This counter will wrap around to 0 when it exceeds its maximum count." ::= { frDteDlciOperEntry 13 } frDteDlciCreationType OBJECT-TYPE SYNTAX INTEGER { static(1), dynamic(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates whether the virtual circuit was manually created (static), or dynamically created (dynamic) via the data link control management interface." ::= { frDteDlciOperEntry 14 } frDteDlciCreationTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "The time when the circuit was created, whether by the Data Link Connection Management Interface or by an SNMP set request." ::= { frDteDlciOperEntry 15 } frDteDlciRateEnforcement OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the CIR attributes committedInformationRate, committedBurst, and excessBurst are used to define rate enforcement on this user DLCI. If rateEnforcement is enabled, and the combined Committed and Excess burst thresholds are exceeded, the frame in violation will be discarded immediately if a HibernationQueue subcomponent is not provisioned under the StDlci component (static entries only). If a HibernationQueue is provisioned, the frame will be placed on the HibernationQueue at time of violation and transmission will be attempted later after the point at which the burst thresholds will no longer be exceeded. Setting all the CIR attributes to zero has the same affect as setting this attribute to disabled. Setting this attribute will operationally override the corresponding provisional value on static entries." DEFVAL { disabled } ::= { frDteDlciOperEntry 17 } frDteDlciCommittedInformationRate OBJECT-TYPE SYNTAX Gauge32 (0..48000000) ACCESS read-write STATUS mandatory DESCRIPTION "The average number of bits to be transferred per second over the DLCI to the DCE. When this attribute is set to zero, the link speed will be used instead. Setting this attribute will operationally override the corresponding provisional value on static entries." DEFVAL { 64000 } ::= { frDteDlciOperEntry 18 } frDteDlciCommittedBurst OBJECT-TYPE SYNTAX Unsigned32 (0..2048000) ACCESS read-write STATUS mandatory DESCRIPTION "The committed burst size (in bits) to which the DLCI wants to subscribe. Setting this attribute will operationally override the corresponding provisional value on static entries." DEFVAL { 64000 } ::= { frDteDlciOperEntry 19 } frDteDlciExcessBurst OBJECT-TYPE SYNTAX Unsigned32 (0..2048000) ACCESS read-write STATUS mandatory DESCRIPTION "The excess burst size (in bits) to which the DLCI wants to subscribe. Setting this attribute will operationally override the corresponding provisional value on static entries." DEFVAL { 0 } ::= { frDteDlciOperEntry 20 } frDteDlciExcessBurstAction OBJECT-TYPE SYNTAX INTEGER { none(1), setDeBit(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the action taken when the committedBurst size has been exceeded on the Dlci but the excessBurst size has not. If the attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay header will be turned on. If the attribute is set to none, no action will be taken. Setting this attribute will operationally override the corresponding provisional value on static entries." DEFVAL { none } ::= { frDteDlciOperEntry 21 } -- FrUni/n VirtualFramer -- FrDte/n VirtualFramer -- The VirtualFramer component binds two services together to -- provide data transfer between them. It is mutually exclusive from -- Framer component. frDteVFramer OBJECT IDENTIFIER ::= { frDte 9 } frDteVFramerRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteVFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of frDteVFramer components." ::= { frDteVFramer 1 } frDteVFramerRowStatusEntry OBJECT-TYPE SYNTAX FrDteVFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single frDteVFramer component." INDEX { frDteIndex, frDteVFramerIndex } ::= { frDteVFramerRowStatusTable 1 } FrDteVFramerRowStatusEntry ::= SEQUENCE { frDteVFramerRowStatus RowStatus, frDteVFramerComponentName DisplayString, frDteVFramerStorageType StorageType, frDteVFramerIndex NonReplicated } frDteVFramerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of frDteVFramer components. These components can be added and deleted." ::= { frDteVFramerRowStatusEntry 1 } frDteVFramerComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { frDteVFramerRowStatusEntry 2 } frDteVFramerStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the frDteVFramer tables." ::= { frDteVFramerRowStatusEntry 4 } frDteVFramerIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the frDteVFramer tables." ::= { frDteVFramerRowStatusEntry 10 } frDteVFramerProvTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteVFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains provisionable attributes for the VirtualFramer component." ::= { frDteVFramer 10 } frDteVFramerProvEntry OBJECT-TYPE SYNTAX FrDteVFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteVFramerProvTable." INDEX { frDteIndex, frDteVFramerIndex } ::= { frDteVFramerProvTable 1 } FrDteVFramerProvEntry ::= SEQUENCE { frDteVFramerOtherVirtualFramer Link, frDteVFramerLogicalProcessor Link } frDteVFramerOtherVirtualFramer OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the other VirtualFramer to which the service is linked, for example, FrUni/n VirtualFramer, FrDte/n VirtualFramer." ::= { frDteVFramerProvEntry 1 } frDteVFramerLogicalProcessor OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the logical processor on which the service component will reside." ::= { frDteVFramerProvEntry 2 } frDteVFramerStateTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteVFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { frDteVFramer 11 } frDteVFramerStateEntry OBJECT-TYPE SYNTAX FrDteVFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteVFramerStateTable." INDEX { frDteIndex, frDteVFramerIndex } ::= { frDteVFramerStateTable 1 } FrDteVFramerStateEntry ::= SEQUENCE { frDteVFramerAdminState INTEGER, frDteVFramerOperationalState INTEGER, frDteVFramerUsageState INTEGER } frDteVFramerAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { frDteVFramerStateEntry 1 } frDteVFramerOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { frDteVFramerStateEntry 2 } frDteVFramerUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { frDteVFramerStateEntry 3 } frDteVFramerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrDteVFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational statistics data for a VirtualFramer component." ::= { frDteVFramer 12 } frDteVFramerStatsEntry OBJECT-TYPE SYNTAX FrDteVFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frDteVFramerStatsTable." INDEX { frDteIndex, frDteVFramerIndex } ::= { frDteVFramerStatsTable 1 } FrDteVFramerStatsEntry ::= SEQUENCE { frDteVFramerFrmToOtherVFramer PassportCounter64, frDteVFramerFrmFromOtherVFramer PassportCounter64, frDteVFramerOctetFromOtherVFramer PassportCounter64 } frDteVFramerFrmToOtherVFramer OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames transmitted to the otherVirtualFramer." ::= { frDteVFramerStatsEntry 2 } frDteVFramerFrmFromOtherVFramer OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames received from the otherVirtualFramer." ::= { frDteVFramerStatsEntry 3 } frDteVFramerOctetFromOtherVFramer OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the octets received from the otherVirtualFramer." ::= { frDteVFramerStatsEntry 5 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { frDteDynDlciDefsRateEnforcement, -- frDteCustomerIdentifier, -- frDteStDlciHqMemThresholdExceeded, -- frDteFramerNonOctetErrors, -- frDteDlciReceivedBECNs, -- frDteFramerUsageState, -- frDteDlcmiProtoErr, -- frDteStDlciHqQueuePktThreshold, -- frDteFramerNormPrioLinkUtilFromIf, -- frDteRgBfrComponentName, -- frDteFramerLargeFrmErrors, -- frDteUsageState, -- frDteStDlciCommittedInformationRate, -- frDteLeqTotalPktQueued, -- frDteLeqMemThresholdExceeded, -- frDteStDlciStdRowStatus, -- frDteFramerInterfaceName, -- frDteDlciExcessBurstAction, -- frDteLmiStorageType, -- frDteStDlciExcessBurst, -- frDteErrData, -- frDteStDlciHqQueueByteThreshold, -- frDteStDlciComponentName, -- frDteFramerOperationalState, -- frDteErrType, -- frDteVFramerUsageState, -- frDteStDlciHqTotalPktQueued, -- frDteOperationalState, -- frDteDlciOperationalState, -- frDteDlcmiUnknownRpt, -- frDteLeqCurrentBytesQueued, -- frDteStDlciHqRowStatus, -- frDteVFramerComponentName, -- frDteStDlciHqQueuePurgeDiscards, -- frDteDlciSentOctets, -- frDteFramerLrcErrors, -- frDteLeqTotalPktHandled, -- frDteLmiRowStatus, -- frDteFramerAborts, -- frDteRgComponentName, -- frDteStDlciExcessBurstAction, -- frDteStDlciHqCurrentPktQueued, -- frDteStDlciHqTotalPktDiscards, -- frDteDlciCommittedBurst, -- frDteXmitDiscardFramerDown, -- frDteVFramerLogicalProcessor, -- frDteDynDlciDefsCommittedBurst, -- frDteStDlciHqQueueMulticastThreshold, -- frDteLeqTotalPktForwarded, -- frDteLeqCurrentPktQueued, -- frDteLeqTotalPktDiscards, -- frDteVFramerOperationalState, -- frDteLeqMaxPercentMulticast, -- frDteXmitDiscardCirExceeded, -- frDteErrDiscards, -- frDteLinkOperState, -- frDteRgBfrStorageType, -- frDteErrFaultTime, -- frDteVFramerOtherVirtualFramer, -- frDteAcceptUndefinedDlci, -- frDteStDlciHqTimeToLive, -- frDteLeqForcedPktDiscards, -- frDteStDlciHqTotalPktHandled, -- frDteDlciReceivedFrames, -- frDteFramerUnderruns, -- frDteRgBfrMacType, -- frDteStDlciStorageType, -- frDteDynDlciDefsIpCos, -- frDteDlciReceivedOctets, -- frDteStDlciCommittedBurst, -- frDteDlciCreationTime, -- frDteLeqTimeToLive, -- frDteDlciCreationType, -- frDteReceiveShort, -- frDteXmitDiscardPvcInactive, -- frDteXmitDiscardPvcDown, -- frDteDynDlciDefsExcessBurstAction, -- frDteDlcmiUnknownIe, -- frDteRgSnmpOperStatus, -- frDteRgIfIndex, -- frDteStDlciHqTotalMulticastPkt, -- frDteDlciComponentName, -- frDteRgBfrRowStatus, -- frDteDlciCommittedInformationRate, -- frDteLmiErrorThreshold, -- frDteStDlciHqCurrentMulticastQueued, -- frDteVFramerRowStatus, -- frDteVFramerStorageType, -- frDteComponentName, -- frDteDlciExcessBurst, -- frDteLmiPollingInterval, -- frDteDynDlciDefsCommittedInformationRate, -- frDteLeqTotalMulticastPkt, -- frDteRgStorageType, -- frDteLeqQueueMulticastThreshold, -- frDteStDlciRowStatus, -- frDteDynDlciDefsExcessBurst, -- frDteRgMaxTransmissionUnit, -- frDteErrTime, -- frDteDynDlciDefsComponentName, -- frDteStDlciHqPktThresholdExceeded, -- frDteDlciLastTimeChange, -- frDteFramerComponentName, -- frDteStDlciHqStorageType, -- frDteVFramerOctetFromOtherVFramer, -- frDteStDlciRateEnforcement, -- frDteLeqMaxMsecData, -- frDteStDlciHqMaxMsecData, -- frDteFramerFrmToIf, -- frDteDlciDlciState, -- frDteDlciReceivedFECNs, -- frDteRgAdminState, -- frDteLmiMonitoredEvents, -- frDteStDlciHqMaxPackets, -- frDteLmiLmiStatus, -- frDteRgBfrMacAddr, -- frDteDlcmiSequenceErr, -- frDteRgIfAdminStatus, -- frDteLeqQueuePktThreshold, -- frDteStDlciHqMaxPercentMulticast, -- frDteLeqMaxPackets, -- frDteErrFaults, -- frDteRgLtDlciRowStatus, -- frDteIllegalDlci, -- frDteLeqCurrentMulticastQueued, -- frDteRgBfrBfrIndex, -- frDteLeqPktThresholdExceeded, -- frDteRgUsageState, -- frDteStDlciHqByteThresholdExceeded, -- frDteLeqComponentName, -- frDteStDlciLinkToRemoteGroup, -- frDteRgLtDlciValue, -- frDteDlciSentFrames, -- frDteDynDlciDefsStdRowStatus, -- frDteRecvDiscardPvcDown, -- frDteStDlciHqComponentName, -- frDteLeqStorageType, -- frDteLeqByteThresholdExceeded, -- frDteDefragSequenceErrors, -- frDteLeqHardwareForcedPkt, -- frDteDlciStorageType, -- frDteSnmpOperStatus, -- frDteRgOperationalState, -- frDteBadFc, -- frDteIfIndex, -- frDteLeqQueuePurgeDiscards, -- frDteFramerNormPrioLinkUtilToIf, -- frDteLmiComponentName, -- frDteRowStatus, -- frDteDynDlciDefsStorageType, -- frDteFramerFrmFromIf, -- frDteRecvDiscardPvcInactive, -- frDteFramerStorageType, -- frDteFramerAdminState, -- frDteLmiProcedures, -- frDteStDlciHqTimedOutPkt, -- frDteRecvDiscardLmiInactive, -- frDteFramerCrcErrors, -- frDteStorageType, -- frDteLeqTimedOutPkt, -- frDteRgLinkToProtocolPort, -- frDteDlciAdminState, -- frDteLeqRowStatus, -- frDteStDlciIpCos, -- frDteStDlciHqTotalPktForwarded, -- frDteVFramerFrmToOtherVFramer, -- frDteStDlciHqMulThresholdExceeded, -- frDteDlciRowStatus, -- frDteFramerOverruns, -- frDteLmiFullEnquiryInterval, -- frDteUlpUnknownProtocol, -- frDteXmitDiscardLmiInactive, -- frDteDlciDiscardedFrames, -- frDteVFramerAdminState, -- frDteDynDlciDefsRowStatus, -- frDteAdminState, -- frDteStDlciHqCurrentBytesQueued, -- frDteLeqMulThresholdExceeded, -- frDteFramerRowStatus, -- frDteDlciRateEnforcement, -- frDteLeqQueueByteThreshold, -- frDteDlciUsageState, -- frDteIfAdminStatus, -- frDteVFramerFrmFromOtherVFramer, -- frDteRgRowStatus } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." frameRelayDteGroup OBJECT IDENTIFIER ::= { frameRelayDteMIB 1 } frameRelayDteGroupBE OBJECT IDENTIFIER ::= { frameRelayDteGroup 5 } frameRelayDteGroupBE00 OBJECT IDENTIFIER ::= { frameRelayDteGroupBE 1 } frameRelayDteGroupBE00A OBJECT IDENTIFIER ::= { frameRelayDteGroupBE00 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 FrameRelayDte." -- STATUS mandatory -- DESCRIPTION "FrameRelayDte MIB: MIB Version BE00A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-FrameRelayDteMIB -- INCLUDES { frameRelayDteGroupBE00A } -- draft-ietf-iplpdn-frmib-dte-02.txt -- (a draft for the evolution of RFC1315) -- -- SUPPORTS RFCxxxx-MIB -- INCLUDES { frDlcmiTable, frCircuitTable, frErrTable } -- frameRelayTrapControl is not supported. -- -- variations for frDlcmiTable -- -- VARIATION frDlcmiState -- SYNTAX INTEGER { -- noLmiConfigured (1), -- lmiRev1 (2), -- ansiT1-617-D (3), ANSI T1.617 Annex D -- ccitt-933-A (5) CCITT Q933 Annex A -- } -- DEFVAL { ccitt-933-A } -- DESCRIPTION "The ANSI T1.617 Annix B procedures are not supported." -- -- VARIATION frDlcmiAddress -- SYNTAX INTEGER { -- q922 (4) Final Standard -- } -- DEFVAL { q922 } -- DESCRIPTION "The Q.921, Q.922 (March 90), and Q.922 (November 90) -- address schemes are not supported." -- -- VARIATION frDlcmiAddressLen -- SYNTAX INTEGER { -- two-octets (2) -- } -- DEFVAL { two-octets } -- DESCRIPTION "Three and four octet addresses are not supported." -- -- VARIATION frDlcmiMaxSupportedVCs -- SYNTAX Integer32 (1024) -- DEFVAL { 1024 } -- DESCRIPTION "Only 1024 virtual circuits are supported per ifEntry." -- -- VARIATION frDlcmiMulticast -- SYNTAX INTEGER { -- nonBroadcast (1) -- } -- DEFVAL { nonBroadcast } -- DESCRIPTION "Broadcast virtual circuits are not supported." -- -- variations for frCircuitTable -- -- VARIATION frCircuitState -- MAX-ACCESS read-only -- DEFVAL { inactive } -- DESCRIPTION "Write access is not supported, use frCircuitRowStatus -- instead. Defaults to inactive." -- -- VARIATION frCircuitCommittedBurst -- DEFVAL { 64000 } -- DESCRIPTION "This implementation defaults to 64000 bits." -- -- VARIATION frCircuitThroughput -- DEFVAL { 64000 } -- DESCRIPTION "This implementation defaults to 64000 bits/sec." -- -- -- -- frameRelayDteCapabilities OBJECT IDENTIFIER ::= { frameRelayDteMIB 3 } frameRelayDteCapabilitiesBE OBJECT IDENTIFIER ::= { frameRelayDteCapabilities 5 } frameRelayDteCapabilitiesBE00 OBJECT IDENTIFIER ::= { frameRelayDteCapabilitiesBE 1 } frameRelayDteCapabilitiesBE00A OBJECT IDENTIFIER ::= { frameRelayDteCapabilitiesBE00 2 } END