Nortel-Magellan-Passport-IpMIB device MIB details by Northern Telecom Ltd
Nortel-Magellan-Passport-IpMIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing Nortel-Magellan-Passport-IpMIB.
| Vendor: | Northern Telecom Ltd |
|---|---|
| Mib: | Nortel-Magellan-Passport-IpMIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
Nortel-Magellan-Passport-IpMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 TimeTicks, IpAddress FROM RFC1155-SMI passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB Counter32, PhysAddress, Gauge32, RowPointer, DisplayString, StorageType, RowStatus, AreaID, InterfaceIndex, RouterID, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB AsciiString, DashedHexString, NonReplicated, HexString, EnterpriseDateAndTime, Link, AsciiStringIndex FROM Nortel-Magellan-Passport-TextualConventionsMIB vrIndex, vrPpIndex, vrPp, vr FROM Nortel-Magellan-Passport-VirtualRouterMIB; -- LAST-UPDATED "9905250000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- Ip Enterprise MIB." ipMIB OBJECT IDENTIFIER ::= { passportMIBs 27 } -- Vr<string> Pp<string> IpPort -- The IpPort component contains IP attributes specific to this port. vrPpIpPort OBJECT IDENTIFIER ::= { vrPp 5 } vrPpIpPortRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrPpIpPort components." ::= { vrPpIpPort 1 } vrPpIpPortRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpPortRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpPort component." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex } ::= { vrPpIpPortRowStatusTable 1 } VrPpIpPortRowStatusEntry ::= SEQUENCE { vrPpIpPortRowStatus RowStatus, vrPpIpPortComponentName DisplayString, vrPpIpPortStorageType StorageType, vrPpIpPortIndex NonReplicated } vrPpIpPortRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpPort components. These components can be added and deleted." ::= { vrPpIpPortRowStatusEntry 1 } vrPpIpPortComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpPortRowStatusEntry 2 } vrPpIpPortStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpPort tables." ::= { vrPpIpPortRowStatusEntry 4 } vrPpIpPortIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpPort tables." ::= { vrPpIpPortRowStatusEntry 10 } vrPpIpPortProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains provisionable attributes for IP ports." ::= { vrPpIpPort 10 } vrPpIpPortProvEntry OBJECT-TYPE SYNTAX VrPpIpPortProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortProvTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex } ::= { vrPpIpPortProvTable 1 } VrPpIpPortProvEntry ::= SEQUENCE { vrPpIpPortMaxTxUnit Unsigned32, vrPpIpPortArpStatus INTEGER, vrPpIpPortProxyArpStatus INTEGER, vrPpIpPortArpNoLearn INTEGER, vrPpIpPortSendRedirect INTEGER, vrPpIpPortMulticastStatus INTEGER, vrPpIpPortRelayAddress IpAddress, vrPpIpPortRelayBroadcast INTEGER, vrPpIpPortLinkModel INTEGER, vrPpIpPortLanModel INTEGER, vrPpIpPortEncap INTEGER, vrPpIpPortIcmpMaskReply INTEGER, vrPpIpPortDirectedBroadcast INTEGER, vrPpIpPortAssignedQos Unsigned32, vrPpIpPortAllowMcastMacDest INTEGER, vrPpIpPortCosPolicyAssignment Link, vrPpIpPortMcastDomain Unsigned32, vrPpIpPortMcastPolicyAssignment Link } vrPpIpPortMaxTxUnit OBJECT-TYPE SYNTAX Unsigned32 (0..0 | 576..18944) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the IP MTU (Maximum Transmission Unit) supported by this IpPort. The specified MTU must be within the valid range for the IpPort media type." DEFVAL { 0 } ::= { vrPpIpPortProvEntry 2 } vrPpIpPortArpStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), auto(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether ARP is enabled or disabled on this IpPort. If auto is specified, an appropriate value will be selected based on the IpPort media type." DEFVAL { auto } ::= { vrPpIpPortProvEntry 3 } vrPpIpPortProxyArpStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether Proxy ARP is enabled or disabled for this IpPort." DEFVAL { disabled } ::= { vrPpIpPortProvEntry 4 } vrPpIpPortArpNoLearn OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether or not dynamic host entries will be installed in the ARP table when ARP packets are received on this IpPort." DEFVAL { disabled } ::= { vrPpIpPortProvEntry 5 } vrPpIpPortSendRedirect OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether or not ICMP host redirects will be sent out this IpPort." DEFVAL { enabled } ::= { vrPpIpPortProvEntry 6 } vrPpIpPortMulticastStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), auto(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether or not IP multicast packets can be sent out this IpPort. If auto is specified, an appropriate value will be selected based on the IpPort media type." DEFVAL { auto } ::= { vrPpIpPortProvEntry 7 } vrPpIpPortRelayAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a relay broadcast address for this IpPort. Each packet, received on this IpPort, meeting the relay broadcast criteria will be forwarded to the specified relay broadcast address. An relay address of all zero's indicates no relay broadcast address." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrPpIpPortProvEntry 8 } vrPpIpPortRelayBroadcast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), auto(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies how packets, received on other IpPorts, meeting the relay broadcast criteria, will be forwarded out this IpPort. The three options are described as follows: enabled: packets will be forwarded out this IpPort. disabled: packets will not be forwarded out this IpPort. auto: packets will be forwarded out this IpPort only when the bridge state is forwarding." DEFVAL { disabled } ::= { vrPpIpPortProvEntry 9 } vrPpIpPortLinkModel OBJECT-TYPE SYNTAX INTEGER { localAreaNetwork(1), pointToPoint(2), loopback(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the link model to use when the media type for this IpPort is PPP (Point to Point Protocol). A value of localAreaNetwork causes IP to treat this IpPort like a LAN. A value of pointToPoint causes IP to treat this IpPort like two directly connected IP hosts. A value of loopback causes IP to treat this IpPort similar to a point-to-point, but the destination and source points are the same providing an always up interface." DEFVAL { localAreaNetwork } ::= { vrPpIpPortProvEntry 10 } vrPpIpPortLanModel OBJECT-TYPE SYNTAX INTEGER { localAreaNetwork(1), nonBroadcastMultipleAccess(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the lan model to use for this IpPort." DEFVAL { localAreaNetwork } ::= { vrPpIpPortProvEntry 11 } vrPpIpPortEncap OBJECT-TYPE SYNTAX INTEGER { ieee8023(1), ethernet(2), auto(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the encapsulation type to be used when sending packets out this IpPort. If auto is specified, an appropriate value is selected based on the IpPort media type. The values ieee8023 and ethernet can only be specified if the media type is ethernet. Otherwise, auto must be specified. For ethernet media type, the default encapsulation is ethernet." DEFVAL { auto } ::= { vrPpIpPortProvEntry 12 } vrPpIpPortIcmpMaskReply OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether or not replies will be generated in response to ICMP Address Mask Requests received on this IpPort." DEFVAL { enabled } ::= { vrPpIpPortProvEntry 13 } vrPpIpPortDirectedBroadcast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether or not directed broadcast to physical broadcast translation is enabled for incoming traffic on this IpPort. The IP router requirement (RFC1812) says this translation should be enabled; however, in some network environments, setting this attribute to disabled may prevent operational problem such as broadcast storms. Note that in some configuration, setting this attribute to disabled may cause Bootp to fail." DEFVAL { enabled } ::= { vrPpIpPortProvEntry 14 } vrPpIpPortAssignedQos OBJECT-TYPE SYNTAX Unsigned32 (0..3) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the initial Class of Service (CoS) given to each packet received on the IpPort. The CoS value n is used to select Vr/ <string> QosP/n. which determines the QualityofService-Profile to be used when the packet is forwarded. The intial CoS given to a packet by the assignedQoS attribute may be overriden under certain circumstances (see the description of the Vr Qosp component, the cosPolicyAssignment attribute on the IpPort and Ip components, and the ipCos attribute on any of the frameRelayDte staticDlci, frameRelayDte dynamicDlciDefaults, and atmMpe atmConnection components)." DEFVAL { 0 } ::= { vrPpIpPortProvEntry 15 } vrPpIpPortAllowMcastMacDest OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether a multicast destination MAC address is valid on this IpPort or not. Enabling it is non-standard. It can be used for applications such as transparent server backup. Multicast destination MAC address is only supported on LAN media." DEFVAL { disabled } ::= { vrPpIpPortProvEntry 16 } vrPpIpPortCosPolicyAssignment OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the CosPolicyGroup component this IpPort component is using. Assigning a particular policy group to the IpPort may override the effect of the assignedQos; this depends on the actual policies provisioned under the policy group." ::= { vrPpIpPortProvEntry 17 } vrPpIpPortMcastDomain OBJECT-TYPE SYNTAX Unsigned32 (0..3) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the multicast domain index which all traffic coming in from this IpPort use. The numerical value of this attribute selects Vr/<string> Ip Mcast Domain/n." DEFVAL { 0 } ::= { vrPpIpPortProvEntry 18 } vrPpIpPortMcastPolicyAssignment OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the policyGroup component that this IpPort component is using." ::= { vrPpIpPortProvEntry 19 } vrPpIpPortSresProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortSresProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for SourceRouteEndStation support." ::= { vrPpIpPort 11 } vrPpIpPortSresProvEntry OBJECT-TYPE SYNTAX VrPpIpPortSresProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortSresProvTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex } ::= { vrPpIpPortSresProvTable 1 } VrPpIpPortSresProvEntry ::= SEQUENCE { vrPpIpPortSourceRouteEndStationSupport INTEGER } vrPpIpPortSourceRouteEndStationSupport OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to enable or disable support for SourceRouteEndStation (Sres). If set to enable, Sres will be supported on this protocol on this ProtocolPort (Pp). If set to disable, it will not be supported. An Sres component must be provisioned under the VirtualRouter if this attribute is set to enable. If this attribute is set to enable and this Pp has its linkToMedia attribute set, it must be linked to a LanApplication (La) that has its Framer interfaceName linked to a Fddi or TokenRing component." DEFVAL { disable } ::= { vrPpIpPortSresProvEntry 1 } vrPpIpPortAdminControlTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component." ::= { vrPpIpPort 12 } vrPpIpPortAdminControlEntry OBJECT-TYPE SYNTAX VrPpIpPortAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortAdminControlTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex } ::= { vrPpIpPortAdminControlTable 1 } VrPpIpPortAdminControlEntry ::= SEQUENCE { vrPpIpPortSnmpAdminStatus INTEGER } vrPpIpPortSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrPpIpPortAdminControlEntry 1 } vrPpIpPortOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains operational attributes for an IpPort." ::= { vrPpIpPort 13 } vrPpIpPortOperEntry OBJECT-TYPE SYNTAX VrPpIpPortOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortOperTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex } ::= { vrPpIpPortOperTable 1 } VrPpIpPortOperEntry ::= SEQUENCE { vrPpIpPortMediaType INTEGER, vrPpIpPortOperMtu Unsigned32, vrPpIpPortOperArpStatus INTEGER, vrPpIpPortOperMulticastStatus INTEGER, vrPpIpPortOperEncap INTEGER, vrPpIpPortOperCosPolicyAssignment RowPointer } vrPpIpPortMediaType OBJECT-TYPE SYNTAX INTEGER { ethernet(1), fddi(2), tokenRing(3), ppp(4), vcpEther(5), vcpToken(6), vns(7), x25(8), frameRelay(9), clusterBridge(10), smds(11), invalid(12), atmMpeVcEncap(13), atmMpeLlcEncap(14), lecEther(15), lecToken(16), tunnel(17), virtual(18) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the media type of this IpPort." DEFVAL { invalid } ::= { vrPpIpPortOperEntry 1 } vrPpIpPortOperMtu OBJECT-TYPE SYNTAX Unsigned32 (0..0 | 576..18944) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current operational IP MTU for this IpPort. Note that this value may be different than the provisioned maxTxUnit." DEFVAL { 0 } ::= { vrPpIpPortOperEntry 2 } vrPpIpPortOperArpStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current operational ARP status. If the provisioned arpStatus is set to auto, then the IP application automatically determines the operArpStatus based on the IpPort media type." DEFVAL { disabled } ::= { vrPpIpPortOperEntry 3 } vrPpIpPortOperMulticastStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current operational Multicast status. If the provisioned multicastStatus is set to auto, then the IP application automatically determines the operMulticastStatus based on the IpPort media type." DEFVAL { disabled } ::= { vrPpIpPortOperEntry 4 } vrPpIpPortOperEncap OBJECT-TYPE SYNTAX INTEGER { ieee8023(1), ethernet(2), notApplicable(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current operational encapsulation type. If the provisioned encap is set to auto, then the IP application automatically determines the operEncap based on the IpPort media type." DEFVAL { notApplicable } ::= { vrPpIpPortOperEntry 5 } vrPpIpPortOperCosPolicyAssignment OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the CosPolicyGroup component this IpPort component is using." ::= { vrPpIpPortOperEntry 433 } vrPpIpPortRelayBcOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortRelayBcOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains operational attributes for an IpPort's RelayBc counters." ::= { vrPpIpPort 14 } vrPpIpPortRelayBcOperEntry OBJECT-TYPE SYNTAX VrPpIpPortRelayBcOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortRelayBcOperTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex } ::= { vrPpIpPortRelayBcOperTable 1 } VrPpIpPortRelayBcOperEntry ::= SEQUENCE { vrPpIpPortRelayAddressCount Counter32, vrPpIpPortRelayBcCount Counter32 } vrPpIpPortRelayAddressCount OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of frames received on this IpPort which were forwarded to the provisioned relayAddress for this port. This counter wraps to zero when it reaches it's maximum." ::= { vrPpIpPortRelayBcOperEntry 1 } vrPpIpPortRelayBcCount OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of frames received on this port which were forwarded to the broadcastAddress on other IpPorts. This counter is incremented once for every frame received on this port regardless of how many other ports it was sent on. This counter wraps to zero when it reaches it's maximum." ::= { vrPpIpPortRelayBcOperEntry 2 } vrPpIpPortStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrPpIpPort 15 } vrPpIpPortStateEntry OBJECT-TYPE SYNTAX VrPpIpPortStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortStateTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex } ::= { vrPpIpPortStateTable 1 } VrPpIpPortStateEntry ::= SEQUENCE { vrPpIpPortAdminState INTEGER, vrPpIpPortOperationalState INTEGER, vrPpIpPortUsageState INTEGER } vrPpIpPortAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrPpIpPortStateEntry 1 } vrPpIpPortOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrPpIpPortStateEntry 2 } vrPpIpPortUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrPpIpPortStateEntry 3 } vrPpIpPortOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { vrPpIpPort 16 } vrPpIpPortOperStatusEntry OBJECT-TYPE SYNTAX VrPpIpPortOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortOperStatusTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex } ::= { vrPpIpPortOperStatusTable 1 } VrPpIpPortOperStatusEntry ::= SEQUENCE { vrPpIpPortSnmpOperStatus INTEGER } vrPpIpPortSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrPpIpPortOperStatusEntry 1 } -- The IpLogicalIf component defines a single IpPort address on a logical -- IP network. In general, IpPort's can have multiple IpLogicalIf's. -- However, if the media type is PPP (Point to Point Protocol), then only -- one IpLogicalIf is allowed for that IpPort. vrPpIpPortLogicalIf OBJECT IDENTIFIER ::= { vrPpIpPort 2 } vrPpIpPortLogicalIfRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrPpIpPortLogicalIf components." ::= { vrPpIpPortLogicalIf 1 } vrPpIpPortLogicalIfRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpPortLogicalIf component." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex } ::= { vrPpIpPortLogicalIfRowStatusTable 1 } VrPpIpPortLogicalIfRowStatusEntry ::= SEQUENCE { vrPpIpPortLogicalIfRowStatus RowStatus, vrPpIpPortLogicalIfComponentName DisplayString, vrPpIpPortLogicalIfStorageType StorageType, vrPpIpPortLogicalIfAddressIndex IpAddress } vrPpIpPortLogicalIfRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIf components. These components can be added and deleted." ::= { vrPpIpPortLogicalIfRowStatusEntry 1 } vrPpIpPortLogicalIfComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpPortLogicalIfRowStatusEntry 2 } vrPpIpPortLogicalIfStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpPortLogicalIf tables." ::= { vrPpIpPortLogicalIfRowStatusEntry 4 } vrPpIpPortLogicalIfAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpPortLogicalIf tables." ::= { vrPpIpPortLogicalIfRowStatusEntry 10 } vrPpIpPortLogicalIfProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains attributes required to define an IpLogicalIf." ::= { vrPpIpPortLogicalIf 10 } vrPpIpPortLogicalIfProvEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortLogicalIfProvTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex } ::= { vrPpIpPortLogicalIfProvTable 1 } VrPpIpPortLogicalIfProvEntry ::= SEQUENCE { vrPpIpPortLogicalIfNetMask IpAddress, vrPpIpPortLogicalIfBroadcastAddress IpAddress, vrPpIpPortLogicalIfLinkDestinationAddress IpAddress, vrPpIpPortLogicalIfLinkToPimSmCandidateRp Link, vrPpIpPortLogicalIfLinkToPimSmCandidateBsr Link } vrPpIpPortLogicalIfNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the subnet mask for this IpLogicalIf. This attribute must be specified because the IP application will not automatically provide a default value." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrPpIpPortLogicalIfProvEntry 1 } vrPpIpPortLogicalIfBroadcastAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the broadcast address for this IpLogicalIf. This attribute is ignored if the IpPort mediaType is ppp (Point to Point Protocol). If the value is 0.0.0.0, the actual broadcast address will be derived from the IP address of this LogicalIf and the netmask attribute." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrPpIpPortLogicalIfProvEntry 2 } vrPpIpPortLogicalIfLinkDestinationAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the address for the link destination for this IpLogicalIf. This attribute is only required if the IpPort media type is PPP (Point to Point Protocol)." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrPpIpPortLogicalIfProvEntry 3 } vrPpIpPortLogicalIfLinkToPimSmCandidateRp OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a link to the CandidateRendezvousPoint component which uses this logicalIf as it's RendezvousPoint (Rp)." ::= { vrPpIpPortLogicalIfProvEntry 4 } vrPpIpPortLogicalIfLinkToPimSmCandidateBsr OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a link to the CandidateBootstrapRouter component which uses this logicalIf as it's BootstrapRouter Interface." ::= { vrPpIpPortLogicalIfProvEntry 5 } vrPpIpPortLogicalIfLinkToMulStaticGpTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfLinkToMulStaticGpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute specifies a link to the component InwStaticRouteEntry which uses this logicalIf as it's OutInterface." ::= { vrPpIpPortLogicalIf 706 } vrPpIpPortLogicalIfLinkToMulStaticGpEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfLinkToMulStaticGpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortLogicalIfLinkToMulStaticGpTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfLinkToMulStaticGpValue } ::= { vrPpIpPortLogicalIfLinkToMulStaticGpTable 1 } VrPpIpPortLogicalIfLinkToMulStaticGpEntry ::= SEQUENCE { vrPpIpPortLogicalIfLinkToMulStaticGpValue Link, vrPpIpPortLogicalIfLinkToMulStaticGpRowStatus RowStatus } vrPpIpPortLogicalIfLinkToMulStaticGpValue OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the vrPpIpPortLogicalIfLinkToMulStaticGpTable." ::= { vrPpIpPortLogicalIfLinkToMulStaticGpEntry 1 } vrPpIpPortLogicalIfLinkToMulStaticGpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the vrPpIpPortLogicalIfLinkToMulStaticGpTable." ::= { vrPpIpPortLogicalIfLinkToMulStaticGpEntry 2 } -- Vr/<string> Pp/<string> IpPort logicalIf/<Ip Address> ospfIf -- An OspfIf component can be created under each logicalIf to run OSPF -- protocol. vrPpIpPortLogicalIfOspfIf OBJECT IDENTIFIER ::= { vrPpIpPortLogicalIf 2 } vrPpIpPortLogicalIfOspfIfRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfOspfIfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrPpIpPortLogicalIfOspfIf components." ::= { vrPpIpPortLogicalIfOspfIf 1 } vrPpIpPortLogicalIfOspfIfRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfOspfIfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpPortLogicalIfOspfIf component." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfOspfIfIndex } ::= { vrPpIpPortLogicalIfOspfIfRowStatusTable 1 } VrPpIpPortLogicalIfOspfIfRowStatusEntry ::= SEQUENCE { vrPpIpPortLogicalIfOspfIfRowStatus RowStatus, vrPpIpPortLogicalIfOspfIfComponentName DisplayString, vrPpIpPortLogicalIfOspfIfStorageType StorageType, vrPpIpPortLogicalIfOspfIfIndex NonReplicated } vrPpIpPortLogicalIfOspfIfRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIfOspfIf components. These components can be added and deleted." ::= { vrPpIpPortLogicalIfOspfIfRowStatusEntry 1 } vrPpIpPortLogicalIfOspfIfComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpPortLogicalIfOspfIfRowStatusEntry 2 } vrPpIpPortLogicalIfOspfIfStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpPortLogicalIfOspfIf tables." ::= { vrPpIpPortLogicalIfOspfIfRowStatusEntry 4 } vrPpIpPortLogicalIfOspfIfIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpPortLogicalIfOspfIf tables." ::= { vrPpIpPortLogicalIfOspfIfRowStatusEntry 10 } vrPpIpPortLogicalIfOspfIfProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfOspfIfProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group of attributes identifies a provisionable set of attributes." ::= { vrPpIpPortLogicalIfOspfIf 10 } vrPpIpPortLogicalIfOspfIfProvEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfOspfIfProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortLogicalIfOspfIfProvTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfOspfIfIndex } ::= { vrPpIpPortLogicalIfOspfIfProvTable 1 } VrPpIpPortLogicalIfOspfIfProvEntry ::= SEQUENCE { vrPpIpPortLogicalIfOspfIfAreaId AreaID, vrPpIpPortLogicalIfOspfIfIfType INTEGER, vrPpIpPortLogicalIfOspfIfSnmpAdminStatus INTEGER, vrPpIpPortLogicalIfOspfIfRtrPriority Unsigned32, vrPpIpPortLogicalIfOspfIfTransitDelay Unsigned32, vrPpIpPortLogicalIfOspfIfRetransInterval Unsigned32, vrPpIpPortLogicalIfOspfIfHelloInterval Unsigned32, vrPpIpPortLogicalIfOspfIfRtrDeadInterval Unsigned32, vrPpIpPortLogicalIfOspfIfPollInterval Unsigned32, vrPpIpPortLogicalIfOspfIfAuthKey HexString, vrPpIpPortLogicalIfOspfIfMulticastForwarding INTEGER } vrPpIpPortLogicalIfOspfIfAreaId OBJECT-TYPE SYNTAX AreaID ACCESS read-write STATUS mandatory DESCRIPTION "The area Id this Ospf interface belongs to." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrPpIpPortLogicalIfOspfIfProvEntry 1 } vrPpIpPortLogicalIfOspfIfIfType OBJECT-TYPE SYNTAX INTEGER { broadcast(1), nbma(2), pointToPoint(3), loopback(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the type of this Ospf interface. This interface type does not necessarily correlate with the type of the interface set on the logicalIf entry under IpPort." ::= { vrPpIpPortLogicalIfOspfIfProvEntry 2 } vrPpIpPortLogicalIfOspfIfSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The administrative status of this Ospf interface." DEFVAL { up } ::= { vrPpIpPortLogicalIfOspfIfProvEntry 3 } vrPpIpPortLogicalIfOspfIfRtrPriority OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular protocol port. In the event of a tie in this value, routers will use their routerId as a tie breaker." DEFVAL { 1 } ::= { vrPpIpPortLogicalIfOspfIfProvEntry 4 } vrPpIpPortLogicalIfOspfIfTransitDelay OBJECT-TYPE SYNTAX Unsigned32 (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The estimated number of seconds it takes to transmit a link-state update packet over this interface." DEFVAL { 1 } ::= { vrPpIpPortLogicalIfOspfIfProvEntry 5 } vrPpIpPortLogicalIfOspfIfRetransInterval OBJECT-TYPE SYNTAX Unsigned32 (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds between link-state advertisements retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets." DEFVAL { 5 } ::= { vrPpIpPortLogicalIfOspfIfProvEntry 6 } vrPpIpPortLogicalIfOspfIfHelloInterval OBJECT-TYPE SYNTAX Unsigned32 (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network." DEFVAL { 10 } ::= { vrPpIpPortLogicalIfOspfIfProvEntry 7 } vrPpIpPortLogicalIfOspfIfRtrDeadInterval OBJECT-TYPE SYNTAX Unsigned32 (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds that a router's hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the helloIntereval. This value must be the same for all routers attached to a common network." DEFVAL { 40 } ::= { vrPpIpPortLogicalIfOspfIfProvEntry 8 } vrPpIpPortLogicalIfOspfIfPollInterval OBJECT-TYPE SYNTAX Unsigned32 (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The largest time interval, in seconds, between the hello packets sent to an inactive non-broadcast multi-access neighbor." DEFVAL { 120 } ::= { vrPpIpPortLogicalIfOspfIfProvEntry 9 } vrPpIpPortLogicalIfOspfIfAuthKey OBJECT-TYPE SYNTAX HexString (SIZE (1..8)) ACCESS write-only STATUS mandatory DESCRIPTION "The Authentication Key. If the value of the attribute authType of an AreaEntry is simplePassword, and the authKey length is shorter than 8 octets, then the value of authKey will be left adjusted zero-filled to 8 octets." DEFVAL { '0000000000000000'H } -- "0000000000000000" ::= { vrPpIpPortLogicalIfOspfIfProvEntry 10 } vrPpIpPortLogicalIfOspfIfMulticastForwarding OBJECT-TYPE SYNTAX INTEGER { blocked(1) } ACCESS read-write STATUS mandatory DESCRIPTION "The way multicasts should be forwarded on this interface; non forwarded, forwarded as data-link multicasts, or forwarded as data-link unicasts. Data-link multicasting is not meaningful on point-to-point and NBMA(No Broadcast Multi Access) interfaces, and setting this attribute to blocked effectively disables all multicast forwarding." DEFVAL { blocked } ::= { vrPpIpPortLogicalIfOspfIfProvEntry 12 } vrPpIpPortLogicalIfOspfIfOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfOspfIfOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group of attributes identifies operational state that this interface is performing." ::= { vrPpIpPortLogicalIfOspfIf 11 } vrPpIpPortLogicalIfOspfIfOperEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfOspfIfOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortLogicalIfOspfIfOperTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfOspfIfIndex } ::= { vrPpIpPortLogicalIfOspfIfOperTable 1 } VrPpIpPortLogicalIfOspfIfOperEntry ::= SEQUENCE { vrPpIpPortLogicalIfOspfIfState INTEGER, vrPpIpPortLogicalIfOspfIfDesignatedRouter IpAddress, vrPpIpPortLogicalIfOspfIfBackupDesignatedRouter IpAddress, vrPpIpPortLogicalIfOspfIfEvents Counter32 } vrPpIpPortLogicalIfOspfIfState OBJECT-TYPE SYNTAX INTEGER { down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the OSPF interface." DEFVAL { designatedRouter } ::= { vrPpIpPortLogicalIfOspfIfOperEntry 1 } vrPpIpPortLogicalIfOspfIfDesignatedRouter OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Ip address of the designated router." ::= { vrPpIpPortLogicalIfOspfIfOperEntry 2 } vrPpIpPortLogicalIfOspfIfBackupDesignatedRouter OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Ip address of the backup designated router" ::= { vrPpIpPortLogicalIfOspfIfOperEntry 3 } vrPpIpPortLogicalIfOspfIfEvents OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this OSPF interface has changed its state or an error has occurred." ::= { vrPpIpPortLogicalIfOspfIfOperEntry 4 } vrPpIpPortLogicalIfOspfIfMetricTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfOspfIfMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational metric attribute of this interface." ::= { vrPpIpPortLogicalIfOspfIf 12 } vrPpIpPortLogicalIfOspfIfMetricEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfOspfIfMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortLogicalIfOspfIfMetricTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfOspfIfIndex } ::= { vrPpIpPortLogicalIfOspfIfMetricTable 1 } VrPpIpPortLogicalIfOspfIfMetricEntry ::= SEQUENCE { vrPpIpPortLogicalIfOspfIfMetric Unsigned32 } vrPpIpPortLogicalIfOspfIfMetric OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the metric being used by this OspfIf. The metric is derived in one of two ways: 1. If there is a TypeOfService component provisioned under this OspfIf component, then the value of the metric attribute is copied from the provisionable attribute tosMetric. 2. Otherwise, the metric is computed based on the interface speed. If the interface speed is greater than 100 Mbit/s, then the metric is 1. If the interface speed is less than 100 Mbit/s, then the metric is 100 Mbit/s divided by the interface speed. If the interface speed is unknown, then it is treated as 1.54 Mbit/s during the calculation. The value of interface speed is available by displaying the ifSpeed attribute of the corresponding IfTableEntry component." ::= { vrPpIpPortLogicalIfOspfIfMetricEntry 1 } -- Vr/<string> Pp/<string> IpPort logicalIf/<Ip Address> ospfIf -- OspfIfTypeOfService/<Decimal> -- This component describes the metrics to be advertised for a specified -- interface at various types-of-service. vrPpIpPortLogicalIfOspfIfTOS OBJECT IDENTIFIER ::= { vrPpIpPortLogicalIfOspfIf 2 } vrPpIpPortLogicalIfOspfIfTOSRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfOspfIfTOSRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrPpIpPortLogicalIfOspfIfTOS components." ::= { vrPpIpPortLogicalIfOspfIfTOS 1 } vrPpIpPortLogicalIfOspfIfTOSRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfOspfIfTOSRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpPortLogicalIfOspfIfTOS component." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfOspfIfIndex, vrPpIpPortLogicalIfOspfIfTOSMetricTosIndex } ::= { vrPpIpPortLogicalIfOspfIfTOSRowStatusTable 1 } VrPpIpPortLogicalIfOspfIfTOSRowStatusEntry ::= SEQUENCE { vrPpIpPortLogicalIfOspfIfTOSRowStatus RowStatus, vrPpIpPortLogicalIfOspfIfTOSComponentName DisplayString, vrPpIpPortLogicalIfOspfIfTOSStorageType StorageType, vrPpIpPortLogicalIfOspfIfTOSMetricTosIndex Integer32 } vrPpIpPortLogicalIfOspfIfTOSRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIfOspfIfTOS components. These components can be added and deleted." ::= { vrPpIpPortLogicalIfOspfIfTOSRowStatusEntry 1 } vrPpIpPortLogicalIfOspfIfTOSComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpPortLogicalIfOspfIfTOSRowStatusEntry 2 } vrPpIpPortLogicalIfOspfIfTOSStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpPortLogicalIfOspfIfTOS tables." ::= { vrPpIpPortLogicalIfOspfIfTOSRowStatusEntry 4 } vrPpIpPortLogicalIfOspfIfTOSMetricTosIndex OBJECT-TYPE SYNTAX Integer32 (0..0) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpPortLogicalIfOspfIfTOS tables." ::= { vrPpIpPortLogicalIfOspfIfTOSRowStatusEntry 10 } vrPpIpPortLogicalIfOspfIfTOSProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfOspfIfTOSProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Identifies a provisionable set of attributes." ::= { vrPpIpPortLogicalIfOspfIfTOS 10 } vrPpIpPortLogicalIfOspfIfTOSProvEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfOspfIfTOSProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortLogicalIfOspfIfTOSProvTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfOspfIfIndex, vrPpIpPortLogicalIfOspfIfTOSMetricTosIndex } ::= { vrPpIpPortLogicalIfOspfIfTOSProvTable 1 } VrPpIpPortLogicalIfOspfIfTOSProvEntry ::= SEQUENCE { vrPpIpPortLogicalIfOspfIfTOSTosMetric Unsigned32 } vrPpIpPortLogicalIfOspfIfTOSTosMetric OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The metric using this typeOfService on this interface." ::= { vrPpIpPortLogicalIfOspfIfTOSProvEntry 1 } -- Vr/<string> Pp/<string> IpPort logicalIf/<Ip Address> ospfIf -- OspfIfNeighbor/<Ip Address> -- This component specifies the neighbors on a multi-access non-broadcast -- media. This can also be viewed as the provisioned entries of Ospf -- NeighborTable. vrPpIpPortLogicalIfOspfIfNbr OBJECT IDENTIFIER ::= { vrPpIpPortLogicalIfOspfIf 3 } vrPpIpPortLogicalIfOspfIfNbrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfOspfIfNbrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrPpIpPortLogicalIfOspfIfNbr components." ::= { vrPpIpPortLogicalIfOspfIfNbr 1 } vrPpIpPortLogicalIfOspfIfNbrRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfOspfIfNbrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpPortLogicalIfOspfIfNbr component." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfOspfIfIndex, vrPpIpPortLogicalIfOspfIfNbrAddressIndex } ::= { vrPpIpPortLogicalIfOspfIfNbrRowStatusTable 1 } VrPpIpPortLogicalIfOspfIfNbrRowStatusEntry ::= SEQUENCE { vrPpIpPortLogicalIfOspfIfNbrRowStatus RowStatus, vrPpIpPortLogicalIfOspfIfNbrComponentName DisplayString, vrPpIpPortLogicalIfOspfIfNbrStorageType StorageType, vrPpIpPortLogicalIfOspfIfNbrAddressIndex IpAddress } vrPpIpPortLogicalIfOspfIfNbrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIfOspfIfNbr components. These components can be added and deleted." ::= { vrPpIpPortLogicalIfOspfIfNbrRowStatusEntry 1 } vrPpIpPortLogicalIfOspfIfNbrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpPortLogicalIfOspfIfNbrRowStatusEntry 2 } vrPpIpPortLogicalIfOspfIfNbrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpPortLogicalIfOspfIfNbr tables." ::= { vrPpIpPortLogicalIfOspfIfNbrRowStatusEntry 4 } vrPpIpPortLogicalIfOspfIfNbrAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpPortLogicalIfOspfIfNbr tables." ::= { vrPpIpPortLogicalIfOspfIfNbrRowStatusEntry 10 } vrPpIpPortLogicalIfOspfIfNbrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfOspfIfNbrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Identifies a group of Provisionable attributes." ::= { vrPpIpPortLogicalIfOspfIfNbr 10 } vrPpIpPortLogicalIfOspfIfNbrProvEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfOspfIfNbrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortLogicalIfOspfIfNbrProvTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfOspfIfIndex, vrPpIpPortLogicalIfOspfIfNbrAddressIndex } ::= { vrPpIpPortLogicalIfOspfIfNbrProvTable 1 } VrPpIpPortLogicalIfOspfIfNbrProvEntry ::= SEQUENCE { vrPpIpPortLogicalIfOspfIfNbrPriority Unsigned32 } vrPpIpPortLogicalIfOspfIfNbrPriority OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network. The higher the number, the better are the chances of being a designated router." DEFVAL { 1 } ::= { vrPpIpPortLogicalIfOspfIfNbrProvEntry 1 } vrPpIpPortLogicalIfOspfIfNbrOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfOspfIfNbrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Contains the Operational set of attributes for the Neighbor." ::= { vrPpIpPortLogicalIfOspfIfNbr 11 } vrPpIpPortLogicalIfOspfIfNbrOperEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfOspfIfNbrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortLogicalIfOspfIfNbrOperTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfOspfIfIndex, vrPpIpPortLogicalIfOspfIfNbrAddressIndex } ::= { vrPpIpPortLogicalIfOspfIfNbrOperTable 1 } VrPpIpPortLogicalIfOspfIfNbrOperEntry ::= SEQUENCE { vrPpIpPortLogicalIfOspfIfNbrRtrId RouterID, vrPpIpPortLogicalIfOspfIfNbrOptions Unsigned32, vrPpIpPortLogicalIfOspfIfNbrState INTEGER, vrPpIpPortLogicalIfOspfIfNbrEvents Counter32, vrPpIpPortLogicalIfOspfIfNbrLsRetransQlen Gauge32, vrPpIpPortLogicalIfOspfIfNbrExchangeStatus INTEGER, vrPpIpPortLogicalIfOspfIfNbrPermanance INTEGER } vrPpIpPortLogicalIfOspfIfNbrRtrId OBJECT-TYPE SYNTAX RouterID ACCESS read-only STATUS mandatory DESCRIPTION "An Ip Address uniquely identifying the neighboring router in the Autonomous System." ::= { vrPpIpPortLogicalIfOspfIfNbrOperEntry 1 } vrPpIpPortLogicalIfOspfIfNbrOptions OBJECT-TYPE SYNTAX Unsigned32 (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "A bit mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information, if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; i.e., that it implements OSPF Multicast Routing." ::= { vrPpIpPortLogicalIfOspfIfNbrOperEntry 2 } vrPpIpPortLogicalIfOspfIfNbrState OBJECT-TYPE SYNTAX INTEGER { down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the relationship with this neighbor." ::= { vrPpIpPortLogicalIfOspfIfNbrOperEntry 3 } vrPpIpPortLogicalIfOspfIfNbrEvents OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this neighbor relationship has changed state, or an error has occurred." ::= { vrPpIpPortLogicalIfOspfIfNbrOperEntry 4 } vrPpIpPortLogicalIfOspfIfNbrLsRetransQlen OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The current length of the Retransmission queue." ::= { vrPpIpPortLogicalIfOspfIfNbrOperEntry 5 } vrPpIpPortLogicalIfOspfIfNbrExchangeStatus OBJECT-TYPE SYNTAX INTEGER { master(1), slave(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the exchange status for a neighbor Entry." ::= { vrPpIpPortLogicalIfOspfIfNbrOperEntry 6 } vrPpIpPortLogicalIfOspfIfNbrPermanance OBJECT-TYPE SYNTAX INTEGER { permanent(1), dynamic(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays how the neighbor became an entry." DEFVAL { permanent } ::= { vrPpIpPortLogicalIfOspfIfNbrOperEntry 9 } -- Vr/<X> Pp/<X> IpPort LogicalIf/<Ip Address> RipInterface -- This component is used to configure a LogicalIf to run RIP protocol. vrPpIpPortLogicalIfRipIf OBJECT IDENTIFIER ::= { vrPpIpPortLogicalIf 3 } vrPpIpPortLogicalIfRipIfRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfRipIfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrPpIpPortLogicalIfRipIf components." ::= { vrPpIpPortLogicalIfRipIf 1 } vrPpIpPortLogicalIfRipIfRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfRipIfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpPortLogicalIfRipIf component." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfRipIfIndex } ::= { vrPpIpPortLogicalIfRipIfRowStatusTable 1 } VrPpIpPortLogicalIfRipIfRowStatusEntry ::= SEQUENCE { vrPpIpPortLogicalIfRipIfRowStatus RowStatus, vrPpIpPortLogicalIfRipIfComponentName DisplayString, vrPpIpPortLogicalIfRipIfStorageType StorageType, vrPpIpPortLogicalIfRipIfIndex NonReplicated } vrPpIpPortLogicalIfRipIfRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIfRipIf components. These components can be added and deleted." ::= { vrPpIpPortLogicalIfRipIfRowStatusEntry 1 } vrPpIpPortLogicalIfRipIfComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpPortLogicalIfRipIfRowStatusEntry 2 } vrPpIpPortLogicalIfRipIfStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpPortLogicalIfRipIf tables." ::= { vrPpIpPortLogicalIfRipIfRowStatusEntry 4 } vrPpIpPortLogicalIfRipIfIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpPortLogicalIfRipIf tables." ::= { vrPpIpPortLogicalIfRipIfRowStatusEntry 10 } vrPpIpPortLogicalIfRipIfProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfRipIfProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes of the RipIf component." ::= { vrPpIpPortLogicalIfRipIf 10 } vrPpIpPortLogicalIfRipIfProvEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfRipIfProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortLogicalIfRipIfProvTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfRipIfIndex } ::= { vrPpIpPortLogicalIfRipIfProvTable 1 } VrPpIpPortLogicalIfRipIfProvEntry ::= SEQUENCE { vrPpIpPortLogicalIfRipIfSnmpAdminStatus INTEGER, vrPpIpPortLogicalIfRipIfMetric Unsigned32, vrPpIpPortLogicalIfRipIfSilentFlag INTEGER, vrPpIpPortLogicalIfRipIfPoisonReverseFlag INTEGER, vrPpIpPortLogicalIfRipIfFlashUpdateFlag INTEGER, vrPpIpPortLogicalIfRipIfNetworkRouteStatus INTEGER, vrPpIpPortLogicalIfRipIfDefaultRouteMetric Unsigned32, vrPpIpPortLogicalIfRipIfAcceptDefault INTEGER, vrPpIpPortLogicalIfRipIfIfConfSend INTEGER, vrPpIpPortLogicalIfRipIfIfConfReceive INTEGER } vrPpIpPortLogicalIfRipIfSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the administrative status of this RipInterface. Setting this value to disabled will have the effect of rendering it inactive." DEFVAL { up } ::= { vrPpIpPortLogicalIfRipIfProvEntry 1 } vrPpIpPortLogicalIfRipIfMetric OBJECT-TYPE SYNTAX Unsigned32 (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the RIP metric for this logical interface." DEFVAL { 1 } ::= { vrPpIpPortLogicalIfRipIfProvEntry 2 } vrPpIpPortLogicalIfRipIfSilentFlag OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS obsolete DESCRIPTION "If the value of this attribute is set to true, the protocol will only listen to RIP updates, If set to false, then Rip will listen and send RIP updates.This attribute has been migrated to ifConfSend." DEFVAL { false } ::= { vrPpIpPortLogicalIfRipIfProvEntry 3 } vrPpIpPortLogicalIfRipIfPoisonReverseFlag OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If the value of this attribute is set to true, then poison reverse algorithm is used when sending out the updates otherwise use split horizon only." DEFVAL { false } ::= { vrPpIpPortLogicalIfRipIfProvEntry 4 } vrPpIpPortLogicalIfRipIfFlashUpdateFlag OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute when set to true will send updates when updates are received; otherwise RIP will wait till the next update period." DEFVAL { true } ::= { vrPpIpPortLogicalIfRipIfProvEntry 5 } vrPpIpPortLogicalIfRipIfNetworkRouteStatus OBJECT-TYPE SYNTAX INTEGER { naturalNetWithOutDefaultRoute(1), naturalNetWithDefaultRoute(2), defaultRouteOnly(3), subnetsOnly(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute determines what type of network routes will be sent and whether a default route will be generated for this RipInterface. Generated default routes will not go into the routing table, but are sent in the updates going out on the interface. The possible values for this attribute are: naturalNetWithOutDefaultRoute - This value will cause normal RIP network routes to be put in the update. This means that the address of logicalIf pertaining to this RipInterface knowledge is taken into account in determining if the subnetted network or the natural network is sent for any route going into this update. naturalNetWithDefaultRoute - Selecting this value will cause a default route to be generated with the value of the metric selected for the attribute defaultRouteMetric. defaultRouteOnly - Selection of this value causes the default route to be generated with the value of the metric selected for the attribute defaultRouteMetric. NOTE: No other routes will go in the update. subnetsOnly - selection of this value will cause only subnet information to be put in the update. No default routes will be generated or passed on. Only subnetted routes that are part of the same subnetted network that this logicalInterface is on will be put in the update. NOTE: this also effects receiving of updates on this interface. Only subnetted routes that are part of the same subnetted network that this logicalInterface is on will be accepted on a received RIP update on this RipInterface." DEFVAL { naturalNetWithOutDefaultRoute } ::= { vrPpIpPortLogicalIfRipIfProvEntry 6 } vrPpIpPortLogicalIfRipIfDefaultRouteMetric OBJECT-TYPE SYNTAX Unsigned32 (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the metric value for the default route. This value is only used if the attribute networkRouteStatus is configured with a value of either naturalNetWithDefaultRoute or defaultRouteOnly" DEFVAL { 1 } ::= { vrPpIpPortLogicalIfRipIfProvEntry 7 } vrPpIpPortLogicalIfRipIfAcceptDefault OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this attribute is set to true, then accept the default route from this interface." DEFVAL { true } ::= { vrPpIpPortLogicalIfRipIfProvEntry 8 } vrPpIpPortLogicalIfRipIfIfConfSend OBJECT-TYPE SYNTAX INTEGER { doNotSend(1), ripVersion1(2), rip1Compatible(3), ripVersion2(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies what the router sends on this RipIf. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates according to RFC 1058. ripVersion2 implies multicasting RIP-2 updates." DEFVAL { rip1Compatible } ::= { vrPpIpPortLogicalIfRipIfProvEntry 12 } vrPpIpPortLogicalIfRipIfIfConfReceive OBJECT-TYPE SYNTAX INTEGER { rip1(1), rip2(2), rip1OrRip2(3), doNotReceive(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies which version of RIP updates are to be accepted on this RipIf. Note that rip2 and rip1OrRip2 implies reception of multicast packets." DEFVAL { rip1OrRip2 } ::= { vrPpIpPortLogicalIfRipIfProvEntry 13 } vrPpIpPortLogicalIfRipIfStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfRipIfStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains operational attributes of the RipIf component. These attributes are statistical data corresponding to the RIP-2 standard MIB (rfc 1724) rip2Status table." ::= { vrPpIpPortLogicalIfRipIf 11 } vrPpIpPortLogicalIfRipIfStatEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfRipIfStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortLogicalIfRipIfStatTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfRipIfIndex } ::= { vrPpIpPortLogicalIfRipIfStatTable 1 } VrPpIpPortLogicalIfRipIfStatEntry ::= SEQUENCE { vrPpIpPortLogicalIfRipIfIfBadPacketRcv Unsigned32, vrPpIpPortLogicalIfRipIfIfBadRouteRcv Unsigned32, vrPpIpPortLogicalIfRipIfIfTriggeredUpdates Unsigned32 } vrPpIpPortLogicalIfRipIfIfBadPacketRcv OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of RIP response packets recieved by the RIP process which were subsequently discarded for any reason." DEFVAL { 0 } ::= { vrPpIpPortLogicalIfRipIfStatEntry 1 } vrPpIpPortLogicalIfRipIfIfBadRouteRcv OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts how many routes, in valid RIP packets, were ignored for any reason." DEFVAL { 0 } ::= { vrPpIpPortLogicalIfRipIfStatEntry 2 } vrPpIpPortLogicalIfRipIfIfTriggeredUpdates OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of triggered updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information." DEFVAL { 0 } ::= { vrPpIpPortLogicalIfRipIfStatEntry 3 } -- Vr/<string> Pp/<string> IpPort logicalIf/<Ip Address> RipIf -- Neighbor/<Ip address> -- This component is used to configure the Ip Address of the non broadcast -- multi access (NBMA) neighbor. vrPpIpPortLogicalIfRipIfNbr OBJECT IDENTIFIER ::= { vrPpIpPortLogicalIfRipIf 2 } vrPpIpPortLogicalIfRipIfNbrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfRipIfNbrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrPpIpPortLogicalIfRipIfNbr components." ::= { vrPpIpPortLogicalIfRipIfNbr 1 } vrPpIpPortLogicalIfRipIfNbrRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfRipIfNbrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpPortLogicalIfRipIfNbr component." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfRipIfIndex, vrPpIpPortLogicalIfRipIfNbrIndex } ::= { vrPpIpPortLogicalIfRipIfNbrRowStatusTable 1 } VrPpIpPortLogicalIfRipIfNbrRowStatusEntry ::= SEQUENCE { vrPpIpPortLogicalIfRipIfNbrRowStatus RowStatus, vrPpIpPortLogicalIfRipIfNbrComponentName DisplayString, vrPpIpPortLogicalIfRipIfNbrStorageType StorageType, vrPpIpPortLogicalIfRipIfNbrIndex IpAddress } vrPpIpPortLogicalIfRipIfNbrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIfRipIfNbr components. These components can be added and deleted." ::= { vrPpIpPortLogicalIfRipIfNbrRowStatusEntry 1 } vrPpIpPortLogicalIfRipIfNbrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpPortLogicalIfRipIfNbrRowStatusEntry 2 } vrPpIpPortLogicalIfRipIfNbrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpPortLogicalIfRipIfNbr tables." ::= { vrPpIpPortLogicalIfRipIfNbrRowStatusEntry 4 } vrPpIpPortLogicalIfRipIfNbrIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpPortLogicalIfRipIfNbr tables." ::= { vrPpIpPortLogicalIfRipIfNbrRowStatusEntry 10 } -- Vr/<string> Pp/<string> IpPort logicalIf/<Ip Address> IgmpIf -- This component is used to configure a logicalIf to run the IGMP -- protocol. vrPpIpPortLogicalIfIgmpIf OBJECT IDENTIFIER ::= { vrPpIpPortLogicalIf 5 } vrPpIpPortLogicalIfIgmpIfRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfIgmpIfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrPpIpPortLogicalIfIgmpIf components." ::= { vrPpIpPortLogicalIfIgmpIf 1 } vrPpIpPortLogicalIfIgmpIfRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfIgmpIfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpPortLogicalIfIgmpIf component." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfIgmpIfIndex } ::= { vrPpIpPortLogicalIfIgmpIfRowStatusTable 1 } VrPpIpPortLogicalIfIgmpIfRowStatusEntry ::= SEQUENCE { vrPpIpPortLogicalIfIgmpIfRowStatus RowStatus, vrPpIpPortLogicalIfIgmpIfComponentName DisplayString, vrPpIpPortLogicalIfIgmpIfStorageType StorageType, vrPpIpPortLogicalIfIgmpIfIndex NonReplicated } vrPpIpPortLogicalIfIgmpIfRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIfIgmpIf components. These components can be added and deleted." ::= { vrPpIpPortLogicalIfIgmpIfRowStatusEntry 1 } vrPpIpPortLogicalIfIgmpIfComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpPortLogicalIfIgmpIfRowStatusEntry 2 } vrPpIpPortLogicalIfIgmpIfStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpPortLogicalIfIgmpIf tables." ::= { vrPpIpPortLogicalIfIgmpIfRowStatusEntry 4 } vrPpIpPortLogicalIfIgmpIfIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpPortLogicalIfIgmpIf tables." ::= { vrPpIpPortLogicalIfIgmpIfRowStatusEntry 10 } vrPpIpPortLogicalIfIgmpIfProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfIgmpIfProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the InwIpIgmpIf component." ::= { vrPpIpPortLogicalIfIgmpIf 10 } vrPpIpPortLogicalIfIgmpIfProvEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfIgmpIfProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortLogicalIfIgmpIfProvTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfIgmpIfIndex } ::= { vrPpIpPortLogicalIfIgmpIfProvTable 1 } VrPpIpPortLogicalIfIgmpIfProvEntry ::= SEQUENCE { vrPpIpPortLogicalIfIgmpIfVersion INTEGER, vrPpIpPortLogicalIfIgmpIfQueryInterval Unsigned32, vrPpIpPortLogicalIfIgmpIfQueryMaxRespTime Unsigned32 } vrPpIpPortLogicalIfIgmpIfVersion OBJECT-TYPE SYNTAX INTEGER { v2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the IGMP protocol version running on this interface. v2 is the only supported version at this time." DEFVAL { v2 } ::= { vrPpIpPortLogicalIfIgmpIfProvEntry 1 } vrPpIpPortLogicalIfIgmpIfQueryInterval OBJECT-TYPE SYNTAX Unsigned32 (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the frequency at which IGMP Host-Query packets are transmitted on this interface." DEFVAL { 125 } ::= { vrPpIpPortLogicalIfIgmpIfProvEntry 2 } vrPpIpPortLogicalIfIgmpIfQueryMaxRespTime OBJECT-TYPE SYNTAX Unsigned32 (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum query response time advertised in IGMPv2 queries on this interface. The number of seconds represented by the queryMaxRespTime must be less than the Query Interval." DEFVAL { 10 } ::= { vrPpIpPortLogicalIfIgmpIfProvEntry 3 } vrPpIpPortLogicalIfIgmpIfOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfIgmpIfOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of InwIpIgmpIf component." ::= { vrPpIpPortLogicalIfIgmpIf 11 } vrPpIpPortLogicalIfIgmpIfOperEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfIgmpIfOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortLogicalIfIgmpIfOperTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfIgmpIfIndex } ::= { vrPpIpPortLogicalIfIgmpIfOperTable 1 } VrPpIpPortLogicalIfIgmpIfOperEntry ::= SEQUENCE { vrPpIpPortLogicalIfIgmpIfQuerier IpAddress, vrPpIpPortLogicalIfIgmpIfWrongVersionQuery Counter32, vrPpIpPortLogicalIfIgmpIfJoins Counter32, vrPpIpPortLogicalIfIgmpIfGroups Gauge32, vrPpIpPortLogicalIfIgmpIfQuerierExpiryTime Unsigned32 } vrPpIpPortLogicalIfIgmpIfQuerier OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the address of the IGMP Querier on the IP subnet to which this interface is attached." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrPpIpPortLogicalIfIgmpIfOperEntry 2 } vrPpIpPortLogicalIfIgmpIfWrongVersionQuery OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of queries received whose IGMP version does not match that configured for this interface. IGMP requires that all routers on a LAN be configured to run the same version of IGMP." ::= { vrPpIpPortLogicalIfIgmpIfOperEntry 3 } vrPpIpPortLogicalIfIgmpIfJoins OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of times a group membership has been added on this interface." ::= { vrPpIpPortLogicalIfIgmpIfOperEntry 4 } vrPpIpPortLogicalIfIgmpIfGroups OBJECT-TYPE SYNTAX Gauge32 (0..4292967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current number of entries for this interface in the cache table." DEFVAL { 0 } ::= { vrPpIpPortLogicalIfIgmpIfOperEntry 5 } vrPpIpPortLogicalIfIgmpIfQuerierExpiryTime OBJECT-TYPE SYNTAX Unsigned32 (0..3600) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the amount of time remaining before the other querier present timer expires. If the local system is the querier, the value of this object is zero." DEFVAL { 0 } ::= { vrPpIpPortLogicalIfIgmpIfOperEntry 6 } -- This component is used to configure a logicalIf to run PIM-SM -- protocol. vrPpIpPortLogicalIfPimSmIf OBJECT IDENTIFIER ::= { vrPpIpPortLogicalIf 6 } vrPpIpPortLogicalIfPimSmIfRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfPimSmIfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrPpIpPortLogicalIfPimSmIf components." ::= { vrPpIpPortLogicalIfPimSmIf 1 } vrPpIpPortLogicalIfPimSmIfRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfPimSmIfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpPortLogicalIfPimSmIf component." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfPimSmIfIndex } ::= { vrPpIpPortLogicalIfPimSmIfRowStatusTable 1 } VrPpIpPortLogicalIfPimSmIfRowStatusEntry ::= SEQUENCE { vrPpIpPortLogicalIfPimSmIfRowStatus RowStatus, vrPpIpPortLogicalIfPimSmIfComponentName DisplayString, vrPpIpPortLogicalIfPimSmIfStorageType StorageType, vrPpIpPortLogicalIfPimSmIfIndex NonReplicated } vrPpIpPortLogicalIfPimSmIfRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIfPimSmIf components. These components can be added and deleted." ::= { vrPpIpPortLogicalIfPimSmIfRowStatusEntry 1 } vrPpIpPortLogicalIfPimSmIfComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpPortLogicalIfPimSmIfRowStatusEntry 2 } vrPpIpPortLogicalIfPimSmIfStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpPortLogicalIfPimSmIf tables." ::= { vrPpIpPortLogicalIfPimSmIfRowStatusEntry 4 } vrPpIpPortLogicalIfPimSmIfIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpPortLogicalIfPimSmIf tables." ::= { vrPpIpPortLogicalIfPimSmIfRowStatusEntry 10 } vrPpIpPortLogicalIfPimSmIfProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfPimSmIfProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the InwIpPimSmIf component." ::= { vrPpIpPortLogicalIfPimSmIf 10 } vrPpIpPortLogicalIfPimSmIfProvEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfPimSmIfProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortLogicalIfPimSmIfProvTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfPimSmIfIndex } ::= { vrPpIpPortLogicalIfPimSmIfProvTable 1 } VrPpIpPortLogicalIfPimSmIfProvEntry ::= SEQUENCE { vrPpIpPortLogicalIfPimSmIfHelloInterval Unsigned32 } vrPpIpPortLogicalIfPimSmIfHelloInterval OBJECT-TYPE SYNTAX Unsigned32 (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the frequency at which PIM-SM hello messages are transmitted on this interface." DEFVAL { 30 } ::= { vrPpIpPortLogicalIfPimSmIfProvEntry 1 } vrPpIpPortLogicalIfPimSmIfOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortLogicalIfPimSmIfOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes for the InwIpPimSmIf component." ::= { vrPpIpPortLogicalIfPimSmIf 11 } vrPpIpPortLogicalIfPimSmIfOperEntry OBJECT-TYPE SYNTAX VrPpIpPortLogicalIfPimSmIfOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortLogicalIfPimSmIfOperTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortLogicalIfAddressIndex, vrPpIpPortLogicalIfPimSmIfIndex } ::= { vrPpIpPortLogicalIfPimSmIfOperTable 1 } VrPpIpPortLogicalIfPimSmIfOperEntry ::= SEQUENCE { vrPpIpPortLogicalIfPimSmIfDesignatedRouter IpAddress } vrPpIpPortLogicalIfPimSmIfDesignatedRouter OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the Designated Router on this PIM-SM interface. For point-to-point interfaces(wan media), this attribute has the value 0.0.0.0." ::= { vrPpIpPortLogicalIfPimSmIfOperEntry 1 } -- This component allows the configuration of NetSentry filters for this -- IpPort. vrPpIpPortNs OBJECT IDENTIFIER ::= { vrPpIpPort 3 } vrPpIpPortNsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortNsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrPpIpPortNs components." ::= { vrPpIpPortNs 1 } vrPpIpPortNsRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpPortNsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpPortNs component." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortNsIndex } ::= { vrPpIpPortNsRowStatusTable 1 } VrPpIpPortNsRowStatusEntry ::= SEQUENCE { vrPpIpPortNsRowStatus RowStatus, vrPpIpPortNsComponentName DisplayString, vrPpIpPortNsStorageType StorageType, vrPpIpPortNsIndex NonReplicated } vrPpIpPortNsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpPortNs components. These components can be added and deleted." ::= { vrPpIpPortNsRowStatusEntry 1 } vrPpIpPortNsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpPortNsRowStatusEntry 2 } vrPpIpPortNsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpPortNs tables." ::= { vrPpIpPortNsRowStatusEntry 4 } vrPpIpPortNsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpPortNs tables." ::= { vrPpIpPortNsRowStatusEntry 10 } vrPpIpPortNsProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortNsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attributes required by NetSentry to be applied to all IP packets going through this IpPort." ::= { vrPpIpPortNs 10 } vrPpIpPortNsProvEntry OBJECT-TYPE SYNTAX VrPpIpPortNsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortNsProvTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortNsIndex } ::= { vrPpIpPortNsProvTable 1 } VrPpIpPortNsProvEntry ::= SEQUENCE { vrPpIpPortNsIncomingFilter AsciiString, vrPpIpPortNsOutgoingFilter AsciiString } vrPpIpPortNsIncomingFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "An ASCII string which provides the name of the NetSentry filter which will be applied to all IP datagrams arriving from this IpPort." DEFVAL { ''H } -- "" ::= { vrPpIpPortNsProvEntry 1 } vrPpIpPortNsOutgoingFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "An ASCII string which provides the name of NetSentry filter which will be applied to all IP datagrams sent to this IpPort." DEFVAL { ''H } -- "" ::= { vrPpIpPortNsProvEntry 2 } -- Vr/<string> Pp/<string> IpPort BootpPort -- An BootpPort component must be provisioned for each IpPort where -- BOOTP request messages will be received. Each BootpPort component -- can be provisioned with a set of relay addresses. Each BOOTP request -- message received on this port will be sent to the provisioned set of relay -- addresses. vrPpIpPortBootpP OBJECT IDENTIFIER ::= { vrPpIpPort 4 } vrPpIpPortBootpPRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortBootpPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrPpIpPortBootpP components." ::= { vrPpIpPortBootpP 1 } vrPpIpPortBootpPRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpPortBootpPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpPortBootpP component." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortBootpPIndex } ::= { vrPpIpPortBootpPRowStatusTable 1 } VrPpIpPortBootpPRowStatusEntry ::= SEQUENCE { vrPpIpPortBootpPRowStatus RowStatus, vrPpIpPortBootpPComponentName DisplayString, vrPpIpPortBootpPStorageType StorageType, vrPpIpPortBootpPIndex NonReplicated } vrPpIpPortBootpPRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpPortBootpP components. These components can be added and deleted." ::= { vrPpIpPortBootpPRowStatusEntry 1 } vrPpIpPortBootpPComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpPortBootpPRowStatusEntry 2 } vrPpIpPortBootpPStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpPortBootpP tables." ::= { vrPpIpPortBootpPRowStatusEntry 4 } vrPpIpPortBootpPIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpPortBootpP tables." ::= { vrPpIpPortBootpPRowStatusEntry 10 } vrPpIpPortBootpPProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortBootpPProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains provisionable attributes for the BootpPort component." ::= { vrPpIpPortBootpP 10 } vrPpIpPortBootpPProvEntry OBJECT-TYPE SYNTAX VrPpIpPortBootpPProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortBootpPProvTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortBootpPIndex } ::= { vrPpIpPortBootpPProvTable 1 } VrPpIpPortBootpPProvEntry ::= SEQUENCE { vrPpIpPortBootpPRelayForwardStatus INTEGER, vrPpIpPortBootpPBootpLogicalInterface IpAddress } vrPpIpPortBootpPRelayForwardStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), auto(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute controls how BOOTP request packets, received on another port, will be flooded out this port. If relayForwardStatus is enabled, BOOTP requests received on another port will be broadcast out this port. When relayForwardStatus is disabled, BOOTP requests will not be broadcast out this port. If auto is used, the bridge spanning tree database is used to determine if BOOTP requests should be broadcast out this port. Note that when using enabled, it is possible to create misconfigurations which will result in broadcast storms. When using this feature with multiple routers, make sure there are no broadcast forwarding loops. Using auto with bridge spanning tree is safer to use if the network is running bridge spanning tree. Note that for auto to have effect, bridge spanning tree must be running on the corresponding VirtualRouter ProtocolPort." DEFVAL { disabled } ::= { vrPpIpPortBootpPProvEntry 2 } vrPpIpPortBootpPBootpLogicalInterface OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the logical interface whose address is to be the GIADDR of this BOOTP port. If not set, the address of the first logical port is chosen." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrPpIpPortBootpPProvEntry 3 } vrPpIpPortBootpPAdminControlTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortBootpPAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component." ::= { vrPpIpPortBootpP 11 } vrPpIpPortBootpPAdminControlEntry OBJECT-TYPE SYNTAX VrPpIpPortBootpPAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortBootpPAdminControlTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortBootpPIndex } ::= { vrPpIpPortBootpPAdminControlTable 1 } VrPpIpPortBootpPAdminControlEntry ::= SEQUENCE { vrPpIpPortBootpPSnmpAdminStatus INTEGER } vrPpIpPortBootpPSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrPpIpPortBootpPAdminControlEntry 1 } vrPpIpPortBootpPOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortBootpPOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { vrPpIpPortBootpP 12 } vrPpIpPortBootpPOperStatusEntry OBJECT-TYPE SYNTAX VrPpIpPortBootpPOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortBootpPOperStatusTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortBootpPIndex } ::= { vrPpIpPortBootpPOperStatusTable 1 } VrPpIpPortBootpPOperStatusEntry ::= SEQUENCE { vrPpIpPortBootpPSnmpOperStatus INTEGER } vrPpIpPortBootpPSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrPpIpPortBootpPOperStatusEntry 1 } vrPpIpPortBootpPStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortBootpPStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrPpIpPortBootpP 13 } vrPpIpPortBootpPStateEntry OBJECT-TYPE SYNTAX VrPpIpPortBootpPStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortBootpPStateTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortBootpPIndex } ::= { vrPpIpPortBootpPStateTable 1 } VrPpIpPortBootpPStateEntry ::= SEQUENCE { vrPpIpPortBootpPAdminState INTEGER, vrPpIpPortBootpPOperationalState INTEGER, vrPpIpPortBootpPUsageState INTEGER } vrPpIpPortBootpPAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrPpIpPortBootpPStateEntry 1 } vrPpIpPortBootpPOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrPpIpPortBootpPStateEntry 2 } vrPpIpPortBootpPUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrPpIpPortBootpPStateEntry 3 } vrPpIpPortBootpPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortBootpPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains BootpPortEntry component statistics." ::= { vrPpIpPortBootpP 14 } vrPpIpPortBootpPStatsEntry OBJECT-TYPE SYNTAX VrPpIpPortBootpPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortBootpPStatsTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortBootpPIndex } ::= { vrPpIpPortBootpPStatsTable 1 } VrPpIpPortBootpPStatsEntry ::= SEQUENCE { vrPpIpPortBootpPInRequests Counter32, vrPpIpPortBootpPInReplies Counter32, vrPpIpPortBootpPOutRequests Counter32, vrPpIpPortBootpPOutReplies Counter32, vrPpIpPortBootpPInRequestErrors Counter32, vrPpIpPortBootpPInReplyErrors Counter32 } vrPpIpPortBootpPInRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of BOOTP Request messages received on this port." ::= { vrPpIpPortBootpPStatsEntry 1 } vrPpIpPortBootpPInReplies OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of BOOTP Reply messages received on this port." ::= { vrPpIpPortBootpPStatsEntry 2 } vrPpIpPortBootpPOutRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts total the number of BOOTP Request messages broadcast out on this port." ::= { vrPpIpPortBootpPStatsEntry 3 } vrPpIpPortBootpPOutReplies OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of BOOTP Reply messages sent out on this port." ::= { vrPpIpPortBootpPStatsEntry 4 } vrPpIpPortBootpPInRequestErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of BOOTP Request messages received on this port but not forwarded due to an error. An error occurs if the BOOTP hop limit has been exceeded." ::= { vrPpIpPortBootpPStatsEntry 5 } vrPpIpPortBootpPInReplyErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of BOOTP Reply messages received on this port but not forwarded due to an error. An error occurs if the giaddr field in the BOOTP reply does not match an IP address assigned to this VirtualRouter, or if the output IpPort for the BOOTP reply is not provisioned for BOOTP." ::= { vrPpIpPortBootpPStatsEntry 6 } vrPpIpPortBootpPAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpPortBootpPAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute identifies a list of relay addresses. When a BOOTP request message is received on this port, the request will be forwarded to the IP addresses provisioned in relayAddress. Note that BOOTP requests are also broadcast out all other BootpPort's according to the relayForwardStatus of the outgoing port." ::= { vrPpIpPortBootpP 290 } vrPpIpPortBootpPAddrEntry OBJECT-TYPE SYNTAX VrPpIpPortBootpPAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpPortBootpPAddrTable." INDEX { vrIndex, vrPpIndex, vrPpIpPortIndex, vrPpIpPortBootpPIndex, vrPpIpPortBootpPAddrValue } ::= { vrPpIpPortBootpPAddrTable 1 } VrPpIpPortBootpPAddrEntry ::= SEQUENCE { vrPpIpPortBootpPAddrValue IpAddress, vrPpIpPortBootpPAddrRowStatus RowStatus } vrPpIpPortBootpPAddrValue OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the vrPpIpPortBootpPAddrTable." ::= { vrPpIpPortBootpPAddrEntry 1 } vrPpIpPortBootpPAddrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the vrPpIpPortBootpPAddrTable." ::= { vrPpIpPortBootpPAddrEntry 2 } -- Vr/<string> Ip -- This component represents the instance of IP protocol running on this -- virtual router. vrIp OBJECT IDENTIFIER ::= { vr 6 } vrIpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIp components." ::= { vrIp 1 } vrIpRowStatusEntry OBJECT-TYPE SYNTAX VrIpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIp component." INDEX { vrIndex, vrIpIndex } ::= { vrIpRowStatusTable 1 } VrIpRowStatusEntry ::= SEQUENCE { vrIpRowStatus RowStatus, vrIpComponentName DisplayString, vrIpStorageType StorageType, vrIpIndex NonReplicated } vrIpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIp components. These components can be added and deleted." ::= { vrIpRowStatusEntry 1 } vrIpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpRowStatusEntry 2 } vrIpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIp tables." ::= { vrIpRowStatusEntry 4 } vrIpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIp tables." ::= { vrIpRowStatusEntry 10 } vrIpProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains global attributes for IP." ::= { vrIp 100 } vrIpProvEntry OBJECT-TYPE SYNTAX VrIpProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpProvTable." INDEX { vrIndex, vrIpIndex } ::= { vrIpProvTable 1 } VrIpProvEntry ::= SEQUENCE { vrIpForwarding INTEGER, vrIpDefaultTtl Unsigned32, vrIpCosPolicyAssignment Link } vrIpForwarding OBJECT-TYPE SYNTAX INTEGER { gateway(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates whether or not this VR is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this VR" DEFVAL { gateway } ::= { vrIpProvEntry 2 } vrIpDefaultTtl OBJECT-TYPE SYNTAX Unsigned32 (255..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a Time- To-Live value is not supplied by the transport layer protocol. The value of this attribute deviates from the MIB requirement that it will always have a value of 255." DEFVAL { 255 } ::= { vrIpProvEntry 3 } vrIpCosPolicyAssignment OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default cosPolicyGroup component that is associated with the IpPort of every protocol port on the vrirtual router. An individual IpPort can override this default using its own cosPolicyAssignment attribute. If this attribute is empty, CoS policy groups are assigned to only those IP ports where the cosPolicyAssignment attribute under the IpPort component is non-empty." ::= { vrIpProvEntry 4 } vrIpStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the GROUP holding the struct which contains statistical attributes for IP." ::= { vrIp 101 } vrIpStatsEntry OBJECT-TYPE SYNTAX VrIpStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpStatsTable." INDEX { vrIndex, vrIpIndex } ::= { vrIpStatsTable 1 } VrIpStatsEntry ::= SEQUENCE { vrIpInReceives Counter32, vrIpInHdrErrors Counter32, vrIpInAddrErrors Counter32, vrIpForwDatagrams Counter32, vrIpInUnknownProtos Counter32, vrIpInDiscards Counter32, vrIpInDelivers Counter32, vrIpOutRequests Counter32, vrIpOutDiscards Counter32, vrIpOutNoRoutes Counter32, vrIpReasmTimeOut Unsigned32, vrIpReasmReqds Counter32, vrIpReasmOks Counter32, vrIpReasmFails Counter32, vrIpFragOks Counter32, vrIpFragFails Counter32, vrIpFragCreates Counter32, vrIpRoutingDiscards Counter32 } vrIpInReceives OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of input datagrams received from the interfaces, including those received in error . inReceives wraps to zero if reaches its maximum defined value." ::= { vrIpStatsEntry 1 } vrIpInHdrErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc. inHdrErrors wraps to zero if reaches its maximum defined value." ::= { vrIpStatsEntry 2 } vrIpInAddrErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams discarded due to errors such as invalid address, unsupported address class. inAddrErrors wraps to zero if reaches its maximum defined value." ::= { vrIpStatsEntry 3 } vrIpForwDatagrams OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams for which this router was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. forwDatagrams wraps to zero if reaches it's maximum defined value." ::= { vrIpStatsEntry 4 } vrIpInUnknownProtos OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol inUnknownProtos wraps to zero if reaches its maximum defined value." ::= { vrIpStatsEntry 5 } vrIpInDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams for which no problems were encountered to prevent their continued processing, but which were discarded due to the lack of buffers. This does not include any datagram discarded while awaiting for re-assembly. inDiscards wraps to zero if reaches its maximum defined value." ::= { vrIpStatsEntry 6 } vrIpInDelivers OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams successfully delivered to IP user- protocols (including ICMP). inDelivers wraps to zero if reaches its maximum defined value." ::= { vrIpStatsEntry 7 } vrIpOutRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. This sum does not include datagrams counted in ForwDatagrams. outRequests wraps to zero if reaches its maximum defined value." ::= { vrIpStatsEntry 8 } vrIpOutDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound datagrams that were discarded due to the lack of buffers. This sum also includes datagrams counted in forwDatagrams if any such packets met the discard criterion. outDiscards wraps to zero if reaches its maximum defined value." ::= { vrIpStatsEntry 9 } vrIpOutNoRoutes OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound datagrams discarded because no route could be found to transmit them to their destination. This counter includes any datagrams counted in forwDatagrams. outNoRoutes wraps to zero if reaches its maximum defined value." ::= { vrIpStatsEntry 10 } vrIpReasmTimeOut OBJECT-TYPE SYNTAX Unsigned32 (0..5) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of seconds, which received fragments are held while they are awaiting reassembly at this gateway." DEFVAL { 5 } ::= { vrIpStatsEntry 11 } vrIpReasmReqds OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of the IP fragments received by this gateway which needed to be reassembled. reasmReqds wraps to zero if reaches its maximum defined value." ::= { vrIpStatsEntry 12 } vrIpReasmOks OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP fragments successfully reassembled by this gateway. reasmOks wraps to zero if reaches its maximum defined value." ::= { vrIpStatsEntry 13 } vrIpReasmFails OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this gateway is unabled to assemble IP-fragments for whatever reasons. reasmFails wraps to zero if reaches its maximum defined value." ::= { vrIpStatsEntry 14 } vrIpFragOks OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams that have been successfully fragmented by this gateway. fragOks wraps to zero if reaches its maximum defined value." ::= { vrIpStatsEntry 15 } vrIpFragFails OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP-fragments that have been discarded because they needed to be fragmented but could not be. For example, their Don't Fragment flag was set. fragFails wraps to zero if reaches its maximum defined value." ::= { vrIpStatsEntry 16 } vrIpFragCreates OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This number of IP fragments that have been generated as a result of fragmentation by this gateway. fragCreates wraps to zero if reaches its maximum defined value." ::= { vrIpStatsEntry 17 } vrIpRoutingDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free -up buffer space for other routing entries. In this implementation, this number is always zero because IP never deletes a valid routing entry." ::= { vrIpStatsEntry 18 } vrIpAdminControlTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component." ::= { vrIp 102 } vrIpAdminControlEntry OBJECT-TYPE SYNTAX VrIpAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpAdminControlTable." INDEX { vrIndex, vrIpIndex } ::= { vrIpAdminControlTable 1 } VrIpAdminControlEntry ::= SEQUENCE { vrIpSnmpAdminStatus INTEGER } vrIpSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpAdminControlEntry 1 } vrIpStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrIp 104 } vrIpStateEntry OBJECT-TYPE SYNTAX VrIpStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpStateTable." INDEX { vrIndex, vrIpIndex } ::= { vrIpStateTable 1 } VrIpStateEntry ::= SEQUENCE { vrIpAdminState INTEGER, vrIpOperationalState INTEGER, vrIpUsageState INTEGER } vrIpAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrIpStateEntry 1 } vrIpOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrIpStateEntry 2 } vrIpUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrIpStateEntry 3 } vrIpOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { vrIp 107 } vrIpOperStatusEntry OBJECT-TYPE SYNTAX VrIpOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOperStatusTable." INDEX { vrIndex, vrIpIndex } ::= { vrIpOperStatusTable 1 } VrIpOperStatusEntry ::= SEQUENCE { vrIpSnmpOperStatus INTEGER } vrIpSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpOperStatusEntry 1 } vrIpCtsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpCtsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of entries that can exist in the IP local cache table on each LP. This attribute provides a way to control the resources allocated to the IP cache tables. The default cache table size is 3000 for an FP and 100 for a CP, is used if this attribute is not specified explicitly. The attribute value must be multiple of 100." ::= { vrIp 394 } vrIpCtsEntry OBJECT-TYPE SYNTAX VrIpCtsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpCtsTable." INDEX { vrIndex, vrIpIndex, vrIpCtsIndex } ::= { vrIpCtsTable 1 } VrIpCtsEntry ::= SEQUENCE { vrIpCtsIndex Integer32, vrIpCtsValue Unsigned32 } vrIpCtsIndex OBJECT-TYPE SYNTAX Integer32 (0..15) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the vrIpCtsTable specific index for the vrIpCtsTable." ::= { vrIpCtsEntry 1 } vrIpCtsValue OBJECT-TYPE SYNTAX Unsigned32 (100..8000) ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents an individual value for the vrIpCtsTable." ::= { vrIpCtsEntry 2 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/<string> Ip ForwardTable/<Ip Address>,<Ip -- Address>,<Decimal>,<IP Address> -- This component contains the information to forward data.This table -- holds the best route information sent from Routing table. vrIpFwd OBJECT IDENTIFIER ::= { vrIp 3 } vrIpFwdRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpFwdRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpFwd components." ::= { vrIpFwd 1 } vrIpFwdRowStatusEntry OBJECT-TYPE SYNTAX VrIpFwdRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpFwd component." INDEX { vrIndex, vrIpIndex, vrIpFwdDestAddressIndex, vrIpFwdDestMaskIndex, vrIpFwdTypeOfServiceIndex, vrIpFwdGatewayIndex } ::= { vrIpFwdRowStatusTable 1 } VrIpFwdRowStatusEntry ::= SEQUENCE { vrIpFwdRowStatus RowStatus, vrIpFwdComponentName DisplayString, vrIpFwdStorageType StorageType, vrIpFwdDestAddressIndex IpAddress, vrIpFwdDestMaskIndex IpAddress, vrIpFwdTypeOfServiceIndex Integer32, vrIpFwdGatewayIndex IpAddress } vrIpFwdRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpFwd components. These components cannot be added nor deleted." ::= { vrIpFwdRowStatusEntry 1 } vrIpFwdComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpFwdRowStatusEntry 2 } vrIpFwdStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpFwd tables." ::= { vrIpFwdRowStatusEntry 4 } vrIpFwdDestAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpFwd tables." ::= { vrIpFwdRowStatusEntry 10 } vrIpFwdDestMaskIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpFwd tables." ::= { vrIpFwdRowStatusEntry 11 } vrIpFwdTypeOfServiceIndex OBJECT-TYPE SYNTAX Integer32 (0..31) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpFwd tables." ::= { vrIpFwdRowStatusEntry 12 } vrIpFwdGatewayIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpFwd tables." ::= { vrIpFwdRowStatusEntry 13 } vrIpFwdOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpFwdOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Identifies a group of operational attributes associated with each entry in the Forward Table." ::= { vrIpFwd 10 } vrIpFwdOperEntry OBJECT-TYPE SYNTAX VrIpFwdOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpFwdOperTable." INDEX { vrIndex, vrIpIndex, vrIpFwdDestAddressIndex, vrIpFwdDestMaskIndex, vrIpFwdTypeOfServiceIndex, vrIpFwdGatewayIndex } ::= { vrIpFwdOperTable 1 } VrIpFwdOperEntry ::= SEQUENCE { vrIpFwdIfIndex InterfaceIndex, vrIpFwdType INTEGER, vrIpFwdProtocol INTEGER, vrIpFwdAge Gauge32, vrIpFwdProtocolPortName RowPointer, vrIpFwdNextHopAs Unsigned32, vrIpFwdMetric INTEGER } vrIpFwdIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the SNMP index associated with the protocol port represented by the attribute protocolPortName, which identifies the local interface through which the next hop of this route should be reached." ::= { vrIpFwdOperEntry 1 } vrIpFwdType OBJECT-TYPE SYNTAX INTEGER { notDefined(1), invalid(2), localInterface(3), remoteDestination(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the type of the route," ::= { vrIpFwdOperEntry 2 } vrIpFwdProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), isIs(9), esIs(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14), idpr(15) } ACCESS read-only STATUS mandatory DESCRIPTION "This Attribute identifies the routing mechanism by which this route was learned." ::= { vrIpFwdOperEntry 3 } vrIpFwdAge OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the number of seconds since this route was last updated or otherwise determined to be correct." ::= { vrIpFwdOperEntry 4 } vrIpFwdProtocolPortName OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the name of the protocol port by which the next hop of this route should be reached." ::= { vrIpFwdOperEntry 5 } vrIpFwdNextHopAs OBJECT-TYPE SYNTAX Unsigned32 (0..429467295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the Autonomous System number of the Next Hop. If unknown or not relevant to the protocol indicated by the attribute protocol, the value should be zero." ::= { vrIpFwdOperEntry 7 } vrIpFwdMetric OBJECT-TYPE SYNTAX INTEGER (-1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified by the value of the attribute protocol. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { vrIpFwdOperEntry 8 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/<string> Ip RouteDataBaseEntry/ -- <destAddress>,<destMask>,<protocol> -- This component is used to display the information in the Ip routing -- database. destAddress and destMask indicates the address and mask of -- the route in the RoutingDatabase. protocol indicates the protocol this -- entry is learned from. gateway indicates the nextHop address for remote -- routes. The value of gateway for the localInterface routes will be the -- same value as the destAddress. vrIpRdb OBJECT IDENTIFIER ::= { vrIp 4 } vrIpRdbRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRdbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpRdb components." ::= { vrIpRdb 1 } vrIpRdbRowStatusEntry OBJECT-TYPE SYNTAX VrIpRdbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpRdb component." INDEX { vrIndex, vrIpIndex, vrIpRdbDestAddressIndex, vrIpRdbDestMaskIndex, vrIpRdbProtocolIndex, vrIpRdbGatewayIndex } ::= { vrIpRdbRowStatusTable 1 } VrIpRdbRowStatusEntry ::= SEQUENCE { vrIpRdbRowStatus RowStatus, vrIpRdbComponentName DisplayString, vrIpRdbStorageType StorageType, vrIpRdbDestAddressIndex IpAddress, vrIpRdbDestMaskIndex IpAddress, vrIpRdbProtocolIndex INTEGER, vrIpRdbGatewayIndex IpAddress } vrIpRdbRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpRdb components. These components cannot be added nor deleted." ::= { vrIpRdbRowStatusEntry 1 } vrIpRdbComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpRdbRowStatusEntry 2 } vrIpRdbStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpRdb tables." ::= { vrIpRdbRowStatusEntry 4 } vrIpRdbDestAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpRdb tables." ::= { vrIpRdbRowStatusEntry 10 } vrIpRdbDestMaskIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpRdb tables." ::= { vrIpRdbRowStatusEntry 11 } vrIpRdbProtocolIndex OBJECT-TYPE SYNTAX INTEGER { bogus(1), local(2), remote(3), special(4), ospf(5), ospfExternal(6), ospfType3Discard(7), ospfType7Discard(8), rip(9), ripDiscard(10), egp(11), bgpExternal(12), bgpInternal(13), bgpAggrDiscard(14), redistrib(15) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpRdb tables." ::= { vrIpRdbRowStatusEntry 12 } vrIpRdbGatewayIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpRdb tables." ::= { vrIpRdbRowStatusEntry 13 } vrIpRdbOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRdbOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Identifies a group of operational attributes associated with each entry in the routing database." ::= { vrIpRdb 10 } vrIpRdbOperEntry OBJECT-TYPE SYNTAX VrIpRdbOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpRdbOperTable." INDEX { vrIndex, vrIpIndex, vrIpRdbDestAddressIndex, vrIpRdbDestMaskIndex, vrIpRdbProtocolIndex, vrIpRdbGatewayIndex } ::= { vrIpRdbOperTable 1 } VrIpRdbOperEntry ::= SEQUENCE { vrIpRdbMetric INTEGER, vrIpRdbPreference Unsigned32, vrIpRdbAge Gauge32 } vrIpRdbMetric OBJECT-TYPE SYNTAX INTEGER (-1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified by the value of the index to this entry protocol. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { vrIpRdbOperEntry 1 } vrIpRdbPreference OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the the preference value of this particular entry. The value of this attribute affects the way the routeEntries in this database are selected for installing it in the forwardingTable. The lower the preference value of this entry, the higher are the chances that this entry will be selected to install in the ForwardTable." ::= { vrIpRdbOperEntry 2 } vrIpRdbAge OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the number of seconds since this route was last updated or otherwise determined to be correct." ::= { vrIpRdbOperEntry 3 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/<string> Ip InterfaceEntry/<IpAddr> -- -- This component contains information about all the provisioned logicalIf -- entries under all ipPort components. vrIpIf OBJECT IDENTIFIER ::= { vrIp 5 } vrIpIfRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpIfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpIf components." ::= { vrIpIf 1 } vrIpIfRowStatusEntry OBJECT-TYPE SYNTAX VrIpIfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpIf component." INDEX { vrIndex, vrIpIndex, vrIpIfInterfaceAddressIndex } ::= { vrIpIfRowStatusTable 1 } VrIpIfRowStatusEntry ::= SEQUENCE { vrIpIfRowStatus RowStatus, vrIpIfComponentName DisplayString, vrIpIfStorageType StorageType, vrIpIfInterfaceAddressIndex IpAddress } vrIpIfRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpIf components. These components cannot be added nor deleted." ::= { vrIpIfRowStatusEntry 1 } vrIpIfComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpIfRowStatusEntry 2 } vrIpIfStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpIf tables." ::= { vrIpIfRowStatusEntry 4 } vrIpIfInterfaceAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpIf tables." ::= { vrIpIfRowStatusEntry 10 } vrIpIfOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpIfOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Identifies a group of operational attributes associated with each entry in the Ip interface table." ::= { vrIpIf 10 } vrIpIfOperEntry OBJECT-TYPE SYNTAX VrIpIfOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpIfOperTable." INDEX { vrIndex, vrIpIndex, vrIpIfInterfaceAddressIndex } ::= { vrIpIfOperTable 1 } VrIpIfOperEntry ::= SEQUENCE { vrIpIfInterfaceMask IpAddress, vrIpIfStatus INTEGER, vrIpIfPPName AsciiString, vrIpIfMediaType INTEGER, vrIpIfHardwareAddress DashedHexString, vrIpIfMtu Unsigned32, vrIpIfBroadcastAddress IpAddress, vrIpIfNcHardwareAddress DashedHexString } vrIpIfInterfaceMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the mask for this interface entry." ::= { vrIpIfOperEntry 1 } vrIpIfStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), disabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the status of the provisioned Ip logicalInterface entry. A value of disabled is used when the parent components Vr, Ip or ipPort is in a disabled state. A value of up is used when the interface is in an operational state. A state of down is used if the media associated with this interface is not ready or disabled." ::= { vrIpIfOperEntry 2 } vrIpIfPPName OBJECT-TYPE SYNTAX AsciiString (SIZE (1..23)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the name of the protocol port this logicalIfEntry belongs to." ::= { vrIpIfOperEntry 3 } vrIpIfMediaType OBJECT-TYPE SYNTAX INTEGER { none(1), tokenRing(2), ethernet(3), fddi(4), x25(5), frameRelay(6), ppp(7), clusterBridge(8), virtualLink(9), vcpEther(10), vcpToken(11), vns(12), smds(13), atmMpeVcEncap(14), atmMpeLlcEncap(15), lecEther(16), lecToken(17), tunnel(18), virtual(19) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the media type of interface. When the interface is down, a value of none indicates the media stays down from the beginning. When the interface is down, a value of some valid media type indicates the media is brought down after it was up. Otherwise, when the interface is up or disabled, this attribute should reflect the proper media type of the interface." ::= { vrIpIfOperEntry 4 } vrIpIfHardwareAddress OBJECT-TYPE SYNTAX DashedHexString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the hardware address of the media in canonical form if applicable. The non-canonical version of this address is indicated in ncHardwareAddress." ::= { vrIpIfOperEntry 5 } vrIpIfMtu OBJECT-TYPE SYNTAX Unsigned32 (0..0 | 576..18944) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the maximum transmission unit applicable for this logicalInterface. A value of 0 is used for the interfaces where all the necessary information is not available to compute the mtu applicable for this interface." ::= { vrIpIfOperEntry 6 } vrIpIfBroadcastAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the destination IP address to be used by any application which needs to broadcast on this interface. The value is determined by the corresponding LogicalIf component's broadcastAddress attribute." ::= { vrIpIfOperEntry 7 } vrIpIfNcHardwareAddress OBJECT-TYPE SYNTAX DashedHexString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the non-canonical version of hardwareAddress. This attribute is not displayed for interfaces on non-LAN media." ::= { vrIpIfOperEntry 8 } -- Vr/<string> Ip Egp -- This is used to run the Exterior Gateway Protocol for IP. vrIpEgp OBJECT IDENTIFIER ::= { vrIp 6 } vrIpEgpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpEgp components." ::= { vrIpEgp 1 } vrIpEgpRowStatusEntry OBJECT-TYPE SYNTAX VrIpEgpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpEgp component." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex } ::= { vrIpEgpRowStatusTable 1 } VrIpEgpRowStatusEntry ::= SEQUENCE { vrIpEgpRowStatus RowStatus, vrIpEgpComponentName DisplayString, vrIpEgpStorageType StorageType, vrIpEgpIndex NonReplicated } vrIpEgpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpEgp components. These components can be added and deleted." ::= { vrIpEgpRowStatusEntry 1 } vrIpEgpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpEgpRowStatusEntry 2 } vrIpEgpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpEgp tables." ::= { vrIpEgpRowStatusEntry 4 } vrIpEgpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpEgp tables." ::= { vrIpEgpRowStatusEntry 10 } vrIpEgpProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the EGP component" ::= { vrIpEgp 10 } vrIpEgpProvEntry OBJECT-TYPE SYNTAX VrIpEgpProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpEgpProvTable." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex } ::= { vrIpEgpProvTable 1 } VrIpEgpProvEntry ::= SEQUENCE { vrIpEgpAsId Unsigned32, vrIpEgpDefaultHelloInterval Unsigned32, vrIpEgpDefaultPollInterval Unsigned32, vrIpEgpMaxNatNets Unsigned32, vrIpEgpMaxBufferSize Unsigned32 } vrIpEgpAsId OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The autonomous system identifier for this EGP entity. The value of this asId can not be equal to the value of EgpNeighborEntry asId." ::= { vrIpEgpProvEntry 2 } vrIpEgpDefaultHelloInterval OBJECT-TYPE SYNTAX Unsigned32 (30..900) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to configure the default hello interval for each neighbor. This attribute's value is used by the application for each EgpNeighbor whose helloInterval has not been set." DEFVAL { 30 } ::= { vrIpEgpProvEntry 3 } vrIpEgpDefaultPollInterval OBJECT-TYPE SYNTAX Unsigned32 (120..3600) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to configure the default polling interval for the EGP Neighbor. This attribute's value is used by the application for each EgpNeighbor whose pollInterval has not been set." DEFVAL { 120 } ::= { vrIpEgpProvEntry 4 } vrIpEgpMaxNatNets OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to configure the maximum number of external natural networks this virtual router will be advertising via EGP." DEFVAL { 500 } ::= { vrIpEgpProvEntry 5 } vrIpEgpMaxBufferSize OBJECT-TYPE SYNTAX Unsigned32 (2..16) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum buffer size (in 1024 byte memory blocks) to be used for an EGP update to be sent." DEFVAL { 4 } ::= { vrIpEgpProvEntry 6 } vrIpEgpStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These set of attributes identifies the statistics for the EGP component." ::= { vrIpEgp 11 } vrIpEgpStatsEntry OBJECT-TYPE SYNTAX VrIpEgpStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpEgpStatsTable." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex } ::= { vrIpEgpStatsTable 1 } VrIpEgpStatsEntry ::= SEQUENCE { vrIpEgpInMsgs Counter32, vrIpEgpInErrorMsgs Counter32, vrIpEgpOutErrorMsgs Counter32, vrIpEgpInErrors Counter32, vrIpEgpOutMsgs Counter32, vrIpEgpOutErrors Counter32 } vrIpEgpInMsgs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the number of EGP messages received without error. This counter will wraparound once the value reaches the maximum value." ::= { vrIpEgpStatsEntry 1 } vrIpEgpInErrorMsgs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the sum of EGP error messages from all the neighbors. This counter will wraparound once the value reaches the maximum value." ::= { vrIpEgpStatsEntry 2 } vrIpEgpOutErrorMsgs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the sum of Egp error messages sent to all the neighbors. This counter will wraparound once the value reaches the maximum value." ::= { vrIpEgpStatsEntry 3 } vrIpEgpInErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the number of EGP messages that proved to be in error. This counter will wraparound once the value reaches the maximum value." ::= { vrIpEgpStatsEntry 4 } vrIpEgpOutMsgs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of locally generated EGP messages. This counter will wraparound once the value reaches the maximum value." ::= { vrIpEgpStatsEntry 5 } vrIpEgpOutErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of EGP messages that were locally generated but were not sent out due to resource limitations within an EGP entity.This counter will wraparound once the value reaches the maximum value." ::= { vrIpEgpStatsEntry 6 } vrIpEgpStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrIpEgp 12 } vrIpEgpStateEntry OBJECT-TYPE SYNTAX VrIpEgpStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpEgpStateTable." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex } ::= { vrIpEgpStateTable 1 } VrIpEgpStateEntry ::= SEQUENCE { vrIpEgpAdminState INTEGER, vrIpEgpOperationalState INTEGER, vrIpEgpUsageState INTEGER } vrIpEgpAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrIpEgpStateEntry 1 } vrIpEgpOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrIpEgpStateEntry 2 } vrIpEgpUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrIpEgpStateEntry 3 } vrIpEgpAdminControlTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component." ::= { vrIpEgp 13 } vrIpEgpAdminControlEntry OBJECT-TYPE SYNTAX VrIpEgpAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpEgpAdminControlTable." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex } ::= { vrIpEgpAdminControlTable 1 } VrIpEgpAdminControlEntry ::= SEQUENCE { vrIpEgpSnmpAdminStatus INTEGER } vrIpEgpSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpEgpAdminControlEntry 1 } vrIpEgpOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { vrIpEgp 16 } vrIpEgpOperStatusEntry OBJECT-TYPE SYNTAX VrIpEgpOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpEgpOperStatusTable." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex } ::= { vrIpEgpOperStatusTable 1 } VrIpEgpOperStatusEntry ::= SEQUENCE { vrIpEgpSnmpOperStatus INTEGER } vrIpEgpSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpEgpOperStatusEntry 1 } -- Vr/<string> Ip Egp NeighborEntry/<Ip Address> -- This component identifies the properties of each EGP neighbor. -- The index value of this entry should belong to one of the subnets -- provisioned as logicalIfEntry under one of the IpPort. vrIpEgpNbr OBJECT IDENTIFIER ::= { vrIpEgp 2 } vrIpEgpNbrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpNbrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpEgpNbr components." ::= { vrIpEgpNbr 1 } vrIpEgpNbrRowStatusEntry OBJECT-TYPE SYNTAX VrIpEgpNbrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpEgpNbr component." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex, vrIpEgpNbrNeighborAddressIndex } ::= { vrIpEgpNbrRowStatusTable 1 } VrIpEgpNbrRowStatusEntry ::= SEQUENCE { vrIpEgpNbrRowStatus RowStatus, vrIpEgpNbrComponentName DisplayString, vrIpEgpNbrStorageType StorageType, vrIpEgpNbrNeighborAddressIndex IpAddress } vrIpEgpNbrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpEgpNbr components. These components can be added and deleted." ::= { vrIpEgpNbrRowStatusEntry 1 } vrIpEgpNbrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpEgpNbrRowStatusEntry 2 } vrIpEgpNbrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpEgpNbr tables." ::= { vrIpEgpNbrRowStatusEntry 4 } vrIpEgpNbrNeighborAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpEgpNbr tables." ::= { vrIpEgpNbrRowStatusEntry 10 } vrIpEgpNbrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpNbrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group of attributes identify the provisionable attributes for this EGP neighbor." ::= { vrIpEgpNbr 10 } vrIpEgpNbrProvEntry OBJECT-TYPE SYNTAX VrIpEgpNbrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpEgpNbrProvTable." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex, vrIpEgpNbrNeighborAddressIndex } ::= { vrIpEgpNbrProvTable 1 } VrIpEgpNbrProvEntry ::= SEQUENCE { vrIpEgpNbrAsId Unsigned32, vrIpEgpNbrMode INTEGER, vrIpEgpNbrGenerateDefaultRoute INTEGER, vrIpEgpNbrDefaultRouteMetric Unsigned32, vrIpEgpNbrDefaultMetric Unsigned32, vrIpEgpNbrHelloInterval Unsigned32, vrIpEgpNbrPollInterval Unsigned32 } vrIpEgpNbrAsId OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The autonomous system identifier of this EGP peer. The value of this neighbor's asId should not be equal to the asId value of Egp entity" ::= { vrIpEgpNbrProvEntry 1 } vrIpEgpNbrMode OBJECT-TYPE SYNTAX INTEGER { active(1), passive(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute will indicate whether this neighbor is being configured as an active or passive neighbor." DEFVAL { active } ::= { vrIpEgpNbrProvEntry 2 } vrIpEgpNbrGenerateDefaultRoute OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute distinguishes whether or not the default route should be generated. This route is put in the EGP update along with the normal EGP update routes when updates are sent to this EGP neighbor" DEFVAL { no } ::= { vrIpEgpNbrProvEntry 3 } vrIpEgpNbrDefaultRouteMetric OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the Metric to be used for propagating the 'Default Route'. The value of defaultRouteMetric is used only in the case where the value of the attribute generateDefaultRoute is set to yes." DEFVAL { 128 } ::= { vrIpEgpNbrProvEntry 4 } vrIpEgpNbrDefaultMetric OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the default metric value for routes that are exported to this EgpNeighbor. This value is used when exporting routes to this neighbor and no Export policy applies a different metric." DEFVAL { 128 } ::= { vrIpEgpNbrProvEntry 5 } vrIpEgpNbrHelloInterval OBJECT-TYPE SYNTAX Unsigned32 (30..120) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the interval in seconds, between EGP hello command retransmissions. This is the P1 timer in the RFC904. This value may change in operation due to negotiations." DEFVAL { 30 } ::= { vrIpEgpNbrProvEntry 6 } vrIpEgpNbrPollInterval OBJECT-TYPE SYNTAX Unsigned32 (120..480) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the interval in seconds, between EGP poll command retransmissions. This is the P2 timer in the RFC904. This value may change in operation due to negotiations." DEFVAL { 120 } ::= { vrIpEgpNbrProvEntry 7 } vrIpEgpNbrOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpNbrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group of attributes identifies the operational set of attributes for the NeighborEntry component." ::= { vrIpEgpNbr 11 } vrIpEgpNbrOperEntry OBJECT-TYPE SYNTAX VrIpEgpNbrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpEgpNbrOperTable." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex, vrIpEgpNbrNeighborAddressIndex } ::= { vrIpEgpNbrOperTable 1 } VrIpEgpNbrOperEntry ::= SEQUENCE { vrIpEgpNbrState INTEGER, vrIpEgpNbrInMsgs Counter32, vrIpEgpNbrInErrors Counter32, vrIpEgpNbrOutMsgs Counter32, vrIpEgpNbrOutErrors Counter32, vrIpEgpNbrInErrorMsgs Counter32, vrIpEgpNbrOutErrorMsgs Counter32, vrIpEgpNbrStateUps Counter32, vrIpEgpNbrStateDowns Counter32, vrIpEgpNbrEventTrigger INTEGER } vrIpEgpNbrState OBJECT-TYPE SYNTAX INTEGER { idle(1), acquisition(2), down(3), up(4), cease(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute describes the state of the local system with respect to this entry's EGP Neighbor." ::= { vrIpEgpNbrOperEntry 1 } vrIpEgpNbrInMsgs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of EGP messages received without error from the EGP peer. This counter will wraparound once the value reaches the maximum value." ::= { vrIpEgpNbrOperEntry 2 } vrIpEgpNbrInErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of messages received from this EGP peer that proved to be in error. This counter will wraparound once the value reaches the maximum value." ::= { vrIpEgpNbrOperEntry 3 } vrIpEgpNbrOutMsgs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of locally generated EGP messages for this EGP peer. This counter will wraparound once the value reaches the maximum value." ::= { vrIpEgpNbrOperEntry 4 } vrIpEgpNbrOutErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.This counter will wraparound once the value reaches the maximum value." ::= { vrIpEgpNbrOperEntry 5 } vrIpEgpNbrInErrorMsgs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of EGP-defined error messages received from this EGP peer.This counter will wraparound once the value reaches the maximum value." ::= { vrIpEgpNbrOperEntry 6 } vrIpEgpNbrOutErrorMsgs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of EGP-defined error messages sent to this EGP peer.This counter will wraparound once the value reaches the maximum value." ::= { vrIpEgpNbrOperEntry 7 } vrIpEgpNbrStateUps OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of EGP state transitions to the UP state with this EGP peer. This counter will wraparound once the value reaches the maximum value." ::= { vrIpEgpNbrOperEntry 8 } vrIpEgpNbrStateDowns OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of EGP state transitions from the UP state to any other state with this EGP peer. This counter will wraparound once the value reaches the maximum value." ::= { vrIpEgpNbrOperEntry 9 } vrIpEgpNbrEventTrigger OBJECT-TYPE SYNTAX INTEGER { start(1), stop(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is used to control the state of the Neighbor. It is not allowed to change. This attribute from SNMP perspective deviates from MIB that it is made READONLY." DEFVAL { start } ::= { vrIpEgpNbrOperEntry 10 } -- Vr/<string> Ip Egp Import/n -- This component controls the functionality of route leaking. In other -- words, this component will determine what routes are used by EGP. vrIpEgpImport OBJECT IDENTIFIER ::= { vrIpEgp 3 } vrIpEgpImportRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpImportRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpEgpImport components." ::= { vrIpEgpImport 1 } vrIpEgpImportRowStatusEntry OBJECT-TYPE SYNTAX VrIpEgpImportRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpEgpImport component." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex, vrIpEgpImportIndex } ::= { vrIpEgpImportRowStatusTable 1 } VrIpEgpImportRowStatusEntry ::= SEQUENCE { vrIpEgpImportRowStatus RowStatus, vrIpEgpImportComponentName DisplayString, vrIpEgpImportStorageType StorageType, vrIpEgpImportIndex Integer32 } vrIpEgpImportRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpEgpImport components. These components can be added and deleted." ::= { vrIpEgpImportRowStatusEntry 1 } vrIpEgpImportComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpEgpImportRowStatusEntry 2 } vrIpEgpImportStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpEgpImport tables." ::= { vrIpEgpImportRowStatusEntry 4 } vrIpEgpImportIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpEgpImport tables." ::= { vrIpEgpImportRowStatusEntry 10 } vrIpEgpImportProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpImportProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These set of attributes describe the provisionable attributes for the import component." ::= { vrIpEgpImport 10 } vrIpEgpImportProvEntry OBJECT-TYPE SYNTAX VrIpEgpImportProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpEgpImportProvTable." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex, vrIpEgpImportIndex } ::= { vrIpEgpImportProvTable 1 } VrIpEgpImportProvEntry ::= SEQUENCE { vrIpEgpImportUsageFlag INTEGER, vrIpEgpImportImportMetric Unsigned32, vrIpEgpImportNbrAsId Unsigned32 } vrIpEgpImportUsageFlag OBJECT-TYPE SYNTAX INTEGER { use(1), ignore(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This flag will determine whether or not EGP will use or ignore information in updates received. If the attribute nbrAsId is not specified or any of the NetworkList components are not added, then this attribute when set to ignore will ignore all incoming information." DEFVAL { use } ::= { vrIpEgpImportProvEntry 1 } vrIpEgpImportImportMetric OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to set the metric value to be included in the routing table for any routes sent because this particular import instance was it's 'best match' policy. However this attribute is not a selection key. It should not use or ignore a particular metric value. If the value for this attribute is not specified, then the metric value received in an Egp update will be used. Note: When setting this value, caution should be taken to set the metric value in all relevant Import components to make sure that all matching policies for a given route have the same metric set. This will insure that there are no situations where a specific metric was desired, but doesn't get used in the update because the 'best match' policy for that situation did not set the metric parameter. If the attribute usageFlag for this import policy is set to ignore, then the importMetric value will be ignored by the application. The importMetric value is not used to select which routes to use or ignore but is used to set the metric value for the routes being imported. A value of zero indicates that the metric received in the update will be used." DEFVAL { 0 } ::= { vrIpEgpImportProvEntry 2 } vrIpEgpImportNbrAsId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The autonomous system Id this import policy will apply to. Note: The Valid value of an asId is from 1 to 65,535. This attribute's value when set to 0 will be ignored." ::= { vrIpEgpImportProvEntry 3 } -- Vr/<string> Ip Egp Import/<Decimal> NetworkList/<Decimal> -- This is an optional subcomponent of Import and identifies a set of -- networks that this import policy will apply to. vrIpEgpImportNet OBJECT IDENTIFIER ::= { vrIpEgpImport 2 } vrIpEgpImportNetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpImportNetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpEgpImportNet components." ::= { vrIpEgpImportNet 1 } vrIpEgpImportNetRowStatusEntry OBJECT-TYPE SYNTAX VrIpEgpImportNetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpEgpImportNet component." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex, vrIpEgpImportIndex, vrIpEgpImportNetIndex } ::= { vrIpEgpImportNetRowStatusTable 1 } VrIpEgpImportNetRowStatusEntry ::= SEQUENCE { vrIpEgpImportNetRowStatus RowStatus, vrIpEgpImportNetComponentName DisplayString, vrIpEgpImportNetStorageType StorageType, vrIpEgpImportNetIndex Integer32 } vrIpEgpImportNetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpEgpImportNet components. These components can be added and deleted." ::= { vrIpEgpImportNetRowStatusEntry 1 } vrIpEgpImportNetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpEgpImportNetRowStatusEntry 2 } vrIpEgpImportNetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpEgpImportNet tables." ::= { vrIpEgpImportNetRowStatusEntry 4 } vrIpEgpImportNetIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpEgpImportNet tables." ::= { vrIpEgpImportNetRowStatusEntry 10 } vrIpEgpImportNetProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpImportNetProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group identifies attributes for the NetworkList component for which the import policy will be applied to" ::= { vrIpEgpImportNet 10 } vrIpEgpImportNetProvEntry OBJECT-TYPE SYNTAX VrIpEgpImportNetProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpEgpImportNetProvTable." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex, vrIpEgpImportIndex, vrIpEgpImportNetIndex } ::= { vrIpEgpImportNetProvTable 1 } VrIpEgpImportNetProvEntry ::= SEQUENCE { vrIpEgpImportNetIpAddress IpAddress } vrIpEgpImportNetIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the IP address that needs to be matched against in this network list for the Import policy to be applied to." ::= { vrIpEgpImportNetProvEntry 1 } -- Vr/<string> Ip Egp Export/n -- Each instance of this component specifies an EGP export policy. An -- EGP export policy is used to decide if a route in the IP forwarding table -- should be blocked or advertised as EGP routes onto one or all attached -- EGP autonomous systems of the virtual router. -- Passport IP EGP by default advertises all local routes to all attached -- EGP autonomous systems using the metric 128. vrIpEgpExport OBJECT IDENTIFIER ::= { vrIpEgp 4 } vrIpEgpExportRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpExportRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpEgpExport components." ::= { vrIpEgpExport 1 } vrIpEgpExportRowStatusEntry OBJECT-TYPE SYNTAX VrIpEgpExportRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpEgpExport component." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex, vrIpEgpExportIndex } ::= { vrIpEgpExportRowStatusTable 1 } VrIpEgpExportRowStatusEntry ::= SEQUENCE { vrIpEgpExportRowStatus RowStatus, vrIpEgpExportComponentName DisplayString, vrIpEgpExportStorageType StorageType, vrIpEgpExportIndex Integer32 } vrIpEgpExportRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpEgpExport components. These components can be added and deleted." ::= { vrIpEgpExportRowStatusEntry 1 } vrIpEgpExportComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpEgpExportRowStatusEntry 2 } vrIpEgpExportStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpEgpExport tables." ::= { vrIpEgpExportRowStatusEntry 4 } vrIpEgpExportIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpEgpExport tables." ::= { vrIpEgpExportRowStatusEntry 10 } vrIpEgpExportProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpExportProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains all the provisioned attributes for the Export component." ::= { vrIpEgpExport 10 } vrIpEgpExportProvEntry OBJECT-TYPE SYNTAX VrIpEgpExportProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpEgpExportProvTable." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex, vrIpEgpExportIndex } ::= { vrIpEgpExportProvTable 1 } VrIpEgpExportProvEntry ::= SEQUENCE { vrIpEgpExportAdvertiseStatus INTEGER, vrIpEgpExportExportMetric Unsigned32, vrIpEgpExportProtocol INTEGER, vrIpEgpExportRipInterface IpAddress, vrIpEgpExportRipNeighbor IpAddress, vrIpEgpExportInEgpAsId Unsigned32, vrIpEgpExportOspfTag Unsigned32, vrIpEgpExportOutAutonomousSystem Unsigned32 } vrIpEgpExportAdvertiseStatus OBJECT-TYPE SYNTAX INTEGER { send(1), block(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies if the routes that match this export policy are advertised (send) or not advertised (block)." DEFVAL { send } ::= { vrIpEgpExportProvEntry 1 } vrIpEgpExportExportMetric OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the metric to be used on the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of exportMetric is ignored. The exportMetric value is not used to select which routes to block or send, but rather the metric value advertised for the routes. A value of 0 indicates that the metric associated with the route in the forwarding table is used." DEFVAL { 0 } ::= { vrIpEgpExportProvEntry 2 } vrIpEgpExportProtocol OBJECT-TYPE SYNTAX INTEGER { all(1), egp(2), rip(3), ospfInternal(4), ospfExternal(5), staticLocal(6), staticRemote(7) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the routes to which this export policy applies based on the routing protocol of how the routes are learned. If it is set to all, this export policy applies to all routes in the forwarding table." DEFVAL { all } ::= { vrIpEgpExportProvEntry 3 } vrIpEgpExportRipInterface OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP interface from which the routes are learned. This attribute can only be non zero when the protocol is set to rip. The value of 0.0.0.0 implies any RIP interface on the same virtual router; otherwise the value of this attribute must match the interface address of a LogicalIf that has a RipIf on the same virtual router." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrIpEgpExportProvEntry 4 } vrIpEgpExportRipNeighbor OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP neighbor of which the routes are learned from. This attribute can only be non zero when the protocol is set to rip. The value of 0.0.0.0 implies any RIP neighbor." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrIpEgpExportProvEntry 5 } vrIpEgpExportInEgpAsId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the EGP learned routes to which this export policy applies, based on the EGP autonomous system identifier of which the routes are learned from. This attribute can only be non zero when protocol is set to egp. The value of 0 implies any EGP autonomous system; otherwise the value of this attribute must match the asId of an EGP neighbor on the same virtual router." DEFVAL { 0 } ::= { vrIpEgpExportProvEntry 6 } vrIpEgpExportOspfTag OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the OSPF learned external routes to which this export policy applies, based on the learned OSPF tag of the routes. This attribute can only be set to a non default value when protocol is set to ospfExternal. The value of 4294967295 implies any tag." DEFVAL { 4294967295 } ::= { vrIpEgpExportProvEntry 7 } vrIpEgpExportOutAutonomousSystem OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the EGP autonomous system to which routes are exported to as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of outAutonomousSystem is ignored. The outAutonomousSystem value is not used to select which routes to block or send but where to export the routes. A value of 0 indicates that the routes are exported to all EGP autonomous systems of which the virtual router is a neighbor. Otherwise, the value of this attribute must match the asId of an EGP neighbor on the same virtual router." DEFVAL { 0 } ::= { vrIpEgpExportProvEntry 8 } -- Vr/<string> Ip Egp Export/<Decimal> NetworkList/<Decimal> -- This component identifies a set of attributes when matched determines -- the export policy applied. vrIpEgpExportNet OBJECT IDENTIFIER ::= { vrIpEgpExport 2 } vrIpEgpExportNetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpExportNetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpEgpExportNet components." ::= { vrIpEgpExportNet 1 } vrIpEgpExportNetRowStatusEntry OBJECT-TYPE SYNTAX VrIpEgpExportNetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpEgpExportNet component." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex, vrIpEgpExportIndex, vrIpEgpExportNetIndex } ::= { vrIpEgpExportNetRowStatusTable 1 } VrIpEgpExportNetRowStatusEntry ::= SEQUENCE { vrIpEgpExportNetRowStatus RowStatus, vrIpEgpExportNetComponentName DisplayString, vrIpEgpExportNetStorageType StorageType, vrIpEgpExportNetIndex Integer32 } vrIpEgpExportNetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpEgpExportNet components. These components can be added and deleted." ::= { vrIpEgpExportNetRowStatusEntry 1 } vrIpEgpExportNetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpEgpExportNetRowStatusEntry 2 } vrIpEgpExportNetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpEgpExportNet tables." ::= { vrIpEgpExportNetRowStatusEntry 4 } vrIpEgpExportNetIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpEgpExportNet tables." ::= { vrIpEgpExportNetRowStatusEntry 10 } vrIpEgpExportNetProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpEgpExportNetProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group identifies the set of provisionable attributes for the ExportNetworkList component." ::= { vrIpEgpExportNet 10 } vrIpEgpExportNetProvEntry OBJECT-TYPE SYNTAX VrIpEgpExportNetProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpEgpExportNetProvTable." INDEX { vrIndex, vrIpIndex, vrIpEgpIndex, vrIpEgpExportIndex, vrIpEgpExportNetIndex } ::= { vrIpEgpExportNetProvTable 1 } VrIpEgpExportNetProvEntry ::= SEQUENCE { vrIpEgpExportNetIpAddress IpAddress } vrIpEgpExportNetIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the 32 bit IP address to match against." ::= { vrIpEgpExportNetProvEntry 1 } -- This component is configured to control the Open Shortest Path First IP -- routing protocol. vrIpOspf OBJECT IDENTIFIER ::= { vrIp 7 } vrIpOspfRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpOspf components." ::= { vrIpOspf 1 } vrIpOspfRowStatusEntry OBJECT-TYPE SYNTAX VrIpOspfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpOspf component." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex } ::= { vrIpOspfRowStatusTable 1 } VrIpOspfRowStatusEntry ::= SEQUENCE { vrIpOspfRowStatus RowStatus, vrIpOspfComponentName DisplayString, vrIpOspfStorageType StorageType, vrIpOspfIndex NonReplicated } vrIpOspfRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpOspf components. These components can be added and deleted." ::= { vrIpOspfRowStatusEntry 1 } vrIpOspfComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpOspfRowStatusEntry 2 } vrIpOspfStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpOspf tables." ::= { vrIpOspfRowStatusEntry 4 } vrIpOspfIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpOspf tables." ::= { vrIpOspfRowStatusEntry 10 } vrIpOspfProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group of attributes are used to configure the OSPF component." ::= { vrIpOspf 100 } vrIpOspfProvEntry OBJECT-TYPE SYNTAX VrIpOspfProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfProvTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex } ::= { vrIpOspfProvTable 1 } VrIpOspfProvEntry ::= SEQUENCE { vrIpOspfRouterId RouterID, vrIpOspfSnmpAdminStatus INTEGER, vrIpOspfAsBdrRtrStatus INTEGER, vrIpOspfTosSupport INTEGER, vrIpOspfExtLsdbLimit INTEGER, vrIpOspfMulticastForward Unsigned32, vrIpOspfMigrateRip INTEGER, vrIpOspfGenerateDefaultRouteMetric INTEGER } vrIpOspfRouterId OBJECT-TYPE SYNTAX RouterID ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is an Ip Address that uniquely identifies the router in the autonomous system." ::= { vrIpOspfProvEntry 1 } vrIpOspfSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The administrative status of the OSPF Component in this Virtual Router." DEFVAL { up } ::= { vrIpOspfProvEntry 2 } vrIpOspfAsBdrRtrStatus OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is a flag to note whether this router is an autonomous system border router. If this router is configured to export any routes learned from other than OSPF-internal protocol, this attribute should be configured as autonomous system border router." DEFVAL { false } ::= { vrIpOspfProvEntry 3 } vrIpOspfTosSupport OBJECT-TYPE SYNTAX INTEGER { false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The router's support for type-of-service routing. Only one value will be allowed. This is a deviation from supporting the MIB." DEFVAL { false } ::= { vrIpOspfProvEntry 4 } vrIpOspfExtLsdbLimit OBJECT-TYPE SYNTAX INTEGER (-1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of external link-state entries that can be stored in the link-state database. If the value is -1, then there is no limit, that is the maximum number of external OSPF routes that this autonomous system border router will originate. It will begin to flush LSA(Link State Advertisement)s, if an ASBR might receive bursts of external routes (for example, a regional network), then the parameter should be configured to a reasonable level. If there are less than two thousand routes and large bursts are unlikely, then the default should be adequate. This parameter will not affect the number of external OSPF routes a router will store in it's database." DEFVAL { -1 } ::= { vrIpOspfProvEntry 5 } vrIpOspfMulticastForward OBJECT-TYPE SYNTAX Unsigned32 (0..0) ACCESS read-write STATUS mandatory DESCRIPTION "A bit mask indicating the limits on Network Layer Multicast(class D) forwarding. It is represented as a sum of the following: if intra-Area forwarding is permitted, 1; else 0 if inter-Area forwarding is permitted 2; else 0 if inter-AS forwarding is permitted, 4; else 0 Only the value of 0 is being supported and this is a MIB deviation." DEFVAL { 0 } ::= { vrIpOspfProvEntry 6 } vrIpOspfMigrateRip OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This Attribute sets the preference level of OSPF-internal routes to be less preferred than RIP. This Parameter should only be used when starting migration of network from RIP to OSPF. When ready to cutover to OSPF, set this attribute disabled and run under normal preferences. All OSPF routers in the Autonomous System should be running with migraterip enabled or with migraterip disabled to prevent routing loops. It is important that the changeover period from RIP to OSPF be performed quickly on all OSPF routers so that no routing loops are formed. These routing loops could be caused by conflicts in the internal RIP and OSPF databases." DEFVAL { disabled } ::= { vrIpOspfProvEntry 7 } vrIpOspfGenerateDefaultRouteMetric OBJECT-TYPE SYNTAX INTEGER (-1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "If this router is configured as an autonomous system border router, then this attribute causes the default route to be generated with a metric value equal to generateDefaultRouteMetric value. This route is put in the OSPF update along with the normal update routes when updates are sent to the neighbors. No default route will be generated if the value is 0." DEFVAL { 0 } ::= { vrIpOspfProvEntry 8 } vrIpOspfOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These group of attributes identifies the operational attributes for this OSPF Component." ::= { vrIpOspf 101 } vrIpOspfOperEntry OBJECT-TYPE SYNTAX VrIpOspfOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfOperTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex } ::= { vrIpOspfOperTable 1 } VrIpOspfOperEntry ::= SEQUENCE { vrIpOspfVersionNumber Unsigned32, vrIpOspfAreaBdrRtrStatus INTEGER, vrIpOspfExternLsaCount Gauge32, vrIpOspfExternLsaChecksumSum Unsigned32, vrIpOspfOriginateNewLsas Counter32, vrIpOspfRxNewLsas Counter32 } vrIpOspfVersionNumber OBJECT-TYPE SYNTAX Unsigned32 (2..2) ACCESS read-only STATUS mandatory DESCRIPTION "The Current Version number of the OSPF Protocol. (2)." DEFVAL { 2 } ::= { vrIpOspfOperEntry 1 } vrIpOspfAreaBdrRtrStatus OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is used to specify whether this router is configured as an area border router." ::= { vrIpOspfOperEntry 2 } vrIpOspfExternLsaCount OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The number of external (LS type 5) link-state advertisements in the link- state database." DEFVAL { 0 } ::= { vrIpOspfOperEntry 3 } vrIpOspfExternLsaChecksumSum OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The 32-bit unsigned sum of the LS checksums of the external link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers." ::= { vrIpOspfOperEntry 4 } vrIpOspfOriginateNewLsas OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA." ::= { vrIpOspfOperEntry 5 } vrIpOspfRxNewLsas OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of link-state advertisements received determined to be new instantiations. This number does not include newer instantiations of self- originated link-state advertisements." ::= { vrIpOspfOperEntry 6 } vrIpOspfStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrIpOspf 102 } vrIpOspfStateEntry OBJECT-TYPE SYNTAX VrIpOspfStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfStateTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex } ::= { vrIpOspfStateTable 1 } VrIpOspfStateEntry ::= SEQUENCE { vrIpOspfAdminState INTEGER, vrIpOspfOperationalState INTEGER, vrIpOspfUsageState INTEGER } vrIpOspfAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrIpOspfStateEntry 1 } vrIpOspfOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrIpOspfStateEntry 2 } vrIpOspfUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrIpOspfStateEntry 3 } vrIpOspfOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { vrIpOspf 105 } vrIpOspfOperStatusEntry OBJECT-TYPE SYNTAX VrIpOspfOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfOperStatusTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex } ::= { vrIpOspfOperStatusTable 1 } VrIpOspfOperStatusEntry ::= SEQUENCE { vrIpOspfSnmpOperStatus INTEGER } vrIpOspfSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpOspfOperStatusEntry 1 } -- Vr/<string> Ip Ospf AreaEntry/<Ip Address> -- This component contains the information about various areas that the -- router is connected to. vrIpOspfArea OBJECT IDENTIFIER ::= { vrIpOspf 2 } vrIpOspfAreaRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfAreaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpOspfArea components." ::= { vrIpOspfArea 1 } vrIpOspfAreaRowStatusEntry OBJECT-TYPE SYNTAX VrIpOspfAreaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpOspfArea component." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfAreaAreaIdIndex } ::= { vrIpOspfAreaRowStatusTable 1 } VrIpOspfAreaRowStatusEntry ::= SEQUENCE { vrIpOspfAreaRowStatus RowStatus, vrIpOspfAreaComponentName DisplayString, vrIpOspfAreaStorageType StorageType, vrIpOspfAreaAreaIdIndex IpAddress } vrIpOspfAreaRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpOspfArea components. These components can be added and deleted." ::= { vrIpOspfAreaRowStatusEntry 1 } vrIpOspfAreaComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpOspfAreaRowStatusEntry 2 } vrIpOspfAreaStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpOspfArea tables." ::= { vrIpOspfAreaRowStatusEntry 4 } vrIpOspfAreaAreaIdIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpOspfArea tables." ::= { vrIpOspfAreaRowStatusEntry 10 } vrIpOspfAreaProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfAreaProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group describes the set of provisionable attributes for the AreaEntry Component." ::= { vrIpOspfArea 10 } vrIpOspfAreaProvEntry OBJECT-TYPE SYNTAX VrIpOspfAreaProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfAreaProvTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfAreaAreaIdIndex } ::= { vrIpOspfAreaProvTable 1 } VrIpOspfAreaProvEntry ::= SEQUENCE { vrIpOspfAreaAuthType INTEGER, vrIpOspfAreaImportAsExtern INTEGER, vrIpOspfAreaAreaSummary INTEGER } vrIpOspfAreaAuthType OBJECT-TYPE SYNTAX INTEGER { none(0), simplePassword(1) } ACCESS read-write STATUS mandatory DESCRIPTION "The authentication type specified for this area." DEFVAL { none } ::= { vrIpOspfAreaProvEntry 1 } vrIpOspfAreaImportAsExtern OBJECT-TYPE SYNTAX INTEGER { importExternal(1), importNoExternal(2), importNssa(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The area's support for importing AS external link-state advertisements. For backbone area (that is, areaId 0.0.0.0), this attribute must be set to importExternal." DEFVAL { importExternal } ::= { vrIpOspfAreaProvEntry 2 } vrIpOspfAreaAreaSummary OBJECT-TYPE SYNTAX INTEGER { noAreaSummary(1), sendAreaSummary(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable controls the import of summary LSAs into stub areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub areas. It will rely entirely on its default route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs." DEFVAL { noAreaSummary } ::= { vrIpOspfAreaProvEntry 3 } vrIpOspfAreaOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfAreaOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group of attributes describes the Operational set of attributes for the AreaEntry component." ::= { vrIpOspfArea 11 } vrIpOspfAreaOperEntry OBJECT-TYPE SYNTAX VrIpOspfAreaOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfAreaOperTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfAreaAreaIdIndex } ::= { vrIpOspfAreaOperTable 1 } VrIpOspfAreaOperEntry ::= SEQUENCE { vrIpOspfAreaSpfRuns Counter32, vrIpOspfAreaAreaBdrRtrCount Gauge32, vrIpOspfAreaAsBdrRtrCount Gauge32, vrIpOspfAreaLsaCount Gauge32, vrIpOspfAreaAreaLsaCksumSum Unsigned32 } vrIpOspfAreaSpfRuns OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that the intra-area route table has been calculated using this area's link-state database since the protocol became operational." ::= { vrIpOspfAreaOperEntry 1 } vrIpOspfAreaAreaBdrRtrCount OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The total number of area border routers reachable within this area. This is initially zero, and is calculated in each Shortest Path First Pass." ::= { vrIpOspfAreaOperEntry 2 } vrIpOspfAreaAsBdrRtrCount OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each Shortest Path First Pass." ::= { vrIpOspfAreaOperEntry 3 } vrIpOspfAreaLsaCount OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's." ::= { vrIpOspfAreaOperEntry 4 } vrIpOspfAreaAreaLsaCksumSum OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The 32-bit unsigned sum of the link-state advertisement's LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers." ::= { vrIpOspfAreaOperEntry 5 } -- Vr/<string> Ip Ospf StubAreaEntry/<Ip Address>,<Decimal> -- This component describes metrics that a default area border router will -- advertise into a stub area. vrIpOspfStub OBJECT IDENTIFIER ::= { vrIpOspf 3 } vrIpOspfStubRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfStubRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpOspfStub components." ::= { vrIpOspfStub 1 } vrIpOspfStubRowStatusEntry OBJECT-TYPE SYNTAX VrIpOspfStubRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpOspfStub component." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfStubAreaIdIndex, vrIpOspfStubTosIndex } ::= { vrIpOspfStubRowStatusTable 1 } VrIpOspfStubRowStatusEntry ::= SEQUENCE { vrIpOspfStubRowStatus RowStatus, vrIpOspfStubComponentName DisplayString, vrIpOspfStubStorageType StorageType, vrIpOspfStubAreaIdIndex IpAddress, vrIpOspfStubTosIndex Integer32 } vrIpOspfStubRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpOspfStub components. These components can be added and deleted." ::= { vrIpOspfStubRowStatusEntry 1 } vrIpOspfStubComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpOspfStubRowStatusEntry 2 } vrIpOspfStubStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpOspfStub tables." ::= { vrIpOspfStubRowStatusEntry 4 } vrIpOspfStubAreaIdIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfStub tables." ::= { vrIpOspfStubRowStatusEntry 10 } vrIpOspfStubTosIndex OBJECT-TYPE SYNTAX Integer32 (0..0) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfStub tables." ::= { vrIpOspfStubRowStatusEntry 11 } vrIpOspfStubProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfStubProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These set of attributes explain the provisionable group for the StubAreaEntry." ::= { vrIpOspfStub 10 } vrIpOspfStubProvEntry OBJECT-TYPE SYNTAX VrIpOspfStubProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfStubProvTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfStubAreaIdIndex, vrIpOspfStubTosIndex } ::= { vrIpOspfStubProvTable 1 } VrIpOspfStubProvEntry ::= SEQUENCE { vrIpOspfStubMetric Unsigned32, vrIpOspfStubMetricType INTEGER, vrIpOspfStubAdvertiseDefault INTEGER } vrIpOspfStubMetric OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "The metric value applied at the indicated type of service." DEFVAL { 1 } ::= { vrIpOspfStubProvEntry 1 } vrIpOspfStubMetricType OBJECT-TYPE SYNTAX INTEGER { ospfMetric(1), comparableCost(2), nonComparable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This type of the metric advertised as a default route." DEFVAL { ospfMetric } ::= { vrIpOspfStubProvEntry 2 } vrIpOspfStubAdvertiseDefault OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute determines whether or not the default routing information will be advertised, depending on other criterion. Setting this value to no can prevent advertising default routing information. If the value of the attribute is set to yes, then the value of the attribute importAsExtern for that particular AreaEntry should be set to importNssa." DEFVAL { yes } ::= { vrIpOspfStubProvEntry 3 } -- Vr/<string> Ip Ospf AreaRangeEntry/<Ip Address>,<enum>, -- <Ip Address>,<Ip Address> -- This table entry replaces the Area Summary table from RFC1253 and is -- used as an extension for CIDR support. vrIpOspfAggregate OBJECT IDENTIFIER ::= { vrIpOspf 5 } vrIpOspfAggregateRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfAggregateRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpOspfAggregate components." ::= { vrIpOspfAggregate 1 } vrIpOspfAggregateRowStatusEntry OBJECT-TYPE SYNTAX VrIpOspfAggregateRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpOspfAggregate component." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfAggregateAreaIdIndex, vrIpOspfAggregateLsdbTypeIndex, vrIpOspfAggregateAggregateNetIndex, vrIpOspfAggregateAggregateMaskIndex } ::= { vrIpOspfAggregateRowStatusTable 1 } VrIpOspfAggregateRowStatusEntry ::= SEQUENCE { vrIpOspfAggregateRowStatus RowStatus, vrIpOspfAggregateComponentName DisplayString, vrIpOspfAggregateStorageType StorageType, vrIpOspfAggregateAreaIdIndex IpAddress, vrIpOspfAggregateLsdbTypeIndex INTEGER, vrIpOspfAggregateAggregateNetIndex IpAddress, vrIpOspfAggregateAggregateMaskIndex IpAddress } vrIpOspfAggregateRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpOspfAggregate components. These components can be added and deleted." ::= { vrIpOspfAggregateRowStatusEntry 1 } vrIpOspfAggregateComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpOspfAggregateRowStatusEntry 2 } vrIpOspfAggregateStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpOspfAggregate tables." ::= { vrIpOspfAggregateRowStatusEntry 4 } vrIpOspfAggregateAreaIdIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfAggregate tables." ::= { vrIpOspfAggregateRowStatusEntry 10 } vrIpOspfAggregateLsdbTypeIndex OBJECT-TYPE SYNTAX INTEGER { summaryLink(3), nssaExternalLink(7) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfAggregate tables." ::= { vrIpOspfAggregateRowStatusEntry 11 } vrIpOspfAggregateAggregateNetIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfAggregate tables." ::= { vrIpOspfAggregateRowStatusEntry 12 } vrIpOspfAggregateAggregateMaskIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfAggregate tables." ::= { vrIpOspfAggregateRowStatusEntry 13 } vrIpOspfAggregateProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfAggregateProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Identifies a group of provisionable attributes." ::= { vrIpOspfAggregate 10 } vrIpOspfAggregateProvEntry OBJECT-TYPE SYNTAX VrIpOspfAggregateProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfAggregateProvTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfAggregateAreaIdIndex, vrIpOspfAggregateLsdbTypeIndex, vrIpOspfAggregateAggregateNetIndex, vrIpOspfAggregateAggregateMaskIndex } ::= { vrIpOspfAggregateProvTable 1 } VrIpOspfAggregateProvEntry ::= SEQUENCE { vrIpOspfAggregateEffect INTEGER } vrIpOspfAggregateEffect OBJECT-TYPE SYNTAX INTEGER { advertiseMatching(1), doNotAdvertiseMatching(2), invalid(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute determines whether or not the routing information will be advertised, depending on other criterion. Setting this value to doNotAdvertiseMatching can prevent advertising routing information for the address and mask values specified as the indices for this entry." DEFVAL { advertiseMatching } ::= { vrIpOspfAggregateProvEntry 1 } -- Vr/<string> Ip Ospf HostEntry/<Ip Address>,<Decimal> -- This component indicates what hosts are directly attached to the router, -- and what metrics and types of service should be advertised for them. -- This component is an optional subcomponent of Ospf. vrIpOspfHost OBJECT IDENTIFIER ::= { vrIpOspf 6 } vrIpOspfHostRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfHostRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpOspfHost components." ::= { vrIpOspfHost 1 } vrIpOspfHostRowStatusEntry OBJECT-TYPE SYNTAX VrIpOspfHostRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpOspfHost component." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfHostAddressIndex, vrIpOspfHostTosIndex } ::= { vrIpOspfHostRowStatusTable 1 } VrIpOspfHostRowStatusEntry ::= SEQUENCE { vrIpOspfHostRowStatus RowStatus, vrIpOspfHostComponentName DisplayString, vrIpOspfHostStorageType StorageType, vrIpOspfHostAddressIndex IpAddress, vrIpOspfHostTosIndex Integer32 } vrIpOspfHostRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpOspfHost components. These components can be added and deleted." ::= { vrIpOspfHostRowStatusEntry 1 } vrIpOspfHostComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpOspfHostRowStatusEntry 2 } vrIpOspfHostStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpOspfHost tables." ::= { vrIpOspfHostRowStatusEntry 4 } vrIpOspfHostAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfHost tables." ::= { vrIpOspfHostRowStatusEntry 10 } vrIpOspfHostTosIndex OBJECT-TYPE SYNTAX Integer32 (0..0) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfHost tables." ::= { vrIpOspfHostRowStatusEntry 11 } vrIpOspfHostProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfHostProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Provisionable set of attributes for the Host entry." ::= { vrIpOspfHost 10 } vrIpOspfHostProvEntry OBJECT-TYPE SYNTAX VrIpOspfHostProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfHostProvTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfHostAddressIndex, vrIpOspfHostTosIndex } ::= { vrIpOspfHostProvTable 1 } VrIpOspfHostProvEntry ::= SEQUENCE { vrIpOspfHostAreaId AreaID, vrIpOspfHostMetric Unsigned32 } vrIpOspfHostAreaId OBJECT-TYPE SYNTAX AreaID ACCESS read-write STATUS mandatory DESCRIPTION "This is an Ip address for the Host Entry that indicates the area it belongs to." ::= { vrIpOspfHostProvEntry 1 } vrIpOspfHostMetric OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The metric to be advertised." DEFVAL { 1 } ::= { vrIpOspfHostProvEntry 2 } -- Vr/<string> Ip Ospf VirtIfEntry/<Ip Address>,<Ip Address> -- This component describes all the virtual links configured for this OSPF -- Router. vrIpOspfVirtIf OBJECT IDENTIFIER ::= { vrIpOspf 7 } vrIpOspfVirtIfRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfVirtIfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpOspfVirtIf components." ::= { vrIpOspfVirtIf 1 } vrIpOspfVirtIfRowStatusEntry OBJECT-TYPE SYNTAX VrIpOspfVirtIfRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpOspfVirtIf component." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfVirtIfAreaIdIndex, vrIpOspfVirtIfNbrRouterIdIndex } ::= { vrIpOspfVirtIfRowStatusTable 1 } VrIpOspfVirtIfRowStatusEntry ::= SEQUENCE { vrIpOspfVirtIfRowStatus RowStatus, vrIpOspfVirtIfComponentName DisplayString, vrIpOspfVirtIfStorageType StorageType, vrIpOspfVirtIfAreaIdIndex IpAddress, vrIpOspfVirtIfNbrRouterIdIndex IpAddress } vrIpOspfVirtIfRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpOspfVirtIf components. These components can be added and deleted." ::= { vrIpOspfVirtIfRowStatusEntry 1 } vrIpOspfVirtIfComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpOspfVirtIfRowStatusEntry 2 } vrIpOspfVirtIfStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpOspfVirtIf tables." ::= { vrIpOspfVirtIfRowStatusEntry 4 } vrIpOspfVirtIfAreaIdIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfVirtIf tables." ::= { vrIpOspfVirtIfRowStatusEntry 10 } vrIpOspfVirtIfNbrRouterIdIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfVirtIf tables." ::= { vrIpOspfVirtIfRowStatusEntry 11 } vrIpOspfVirtIfProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfVirtIfProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group of attributes provide provisioning data for the VirtIfEntry." ::= { vrIpOspfVirtIf 10 } vrIpOspfVirtIfProvEntry OBJECT-TYPE SYNTAX VrIpOspfVirtIfProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfVirtIfProvTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfVirtIfAreaIdIndex, vrIpOspfVirtIfNbrRouterIdIndex } ::= { vrIpOspfVirtIfProvTable 1 } VrIpOspfVirtIfProvEntry ::= SEQUENCE { vrIpOspfVirtIfTransitDelay Unsigned32, vrIpOspfVirtIfRetransInterval Unsigned32, vrIpOspfVirtIfHelloInterval Unsigned32, vrIpOspfVirtIfRtrDeadInterval Unsigned32, vrIpOspfVirtIfAuthKey HexString } vrIpOspfVirtIfTransitDelay OBJECT-TYPE SYNTAX Unsigned32 (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The estimated number of seconds it takes to transmit a link-state update packet over this interface." DEFVAL { 1 } ::= { vrIpOspfVirtIfProvEntry 1 } vrIpOspfVirtIfRetransInterval OBJECT-TYPE SYNTAX Unsigned32 (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value would be well over the expected round-trip time." DEFVAL { 5 } ::= { vrIpOspfVirtIfProvEntry 2 } vrIpOspfVirtIfHelloInterval OBJECT-TYPE SYNTAX Unsigned32 (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor." DEFVAL { 10 } ::= { vrIpOspfVirtIfProvEntry 3 } vrIpOspfVirtIfRtrDeadInterval OBJECT-TYPE SYNTAX Unsigned32 (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor." DEFVAL { 60 } ::= { vrIpOspfVirtIfProvEntry 4 } vrIpOspfVirtIfAuthKey OBJECT-TYPE SYNTAX HexString (SIZE (1..8)) ACCESS write-only STATUS mandatory DESCRIPTION "If authentication type is simple password, the password for this virtual circuit. If the value of the attribute is not set, then this attribute is ignored by the application. If the value of this attribute is set, then the value of the attribute authType under this particular Area should be set to simplePassword, otherwise the application will ignore this authentication key." DEFVAL { '0000000000000000'H } -- "0000000000000000" ::= { vrIpOspfVirtIfProvEntry 5 } vrIpOspfVirtIfOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfVirtIfOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Represents a group of operational attributes for the VirtIfEntry component." ::= { vrIpOspfVirtIf 11 } vrIpOspfVirtIfOperEntry OBJECT-TYPE SYNTAX VrIpOspfVirtIfOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfVirtIfOperTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfVirtIfAreaIdIndex, vrIpOspfVirtIfNbrRouterIdIndex } ::= { vrIpOspfVirtIfOperTable 1 } VrIpOspfVirtIfOperEntry ::= SEQUENCE { vrIpOspfVirtIfState INTEGER, vrIpOspfVirtIfEvents Counter32 } vrIpOspfVirtIfState OBJECT-TYPE SYNTAX INTEGER { down(1), pointToPoint(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the OSPF virtual interface." ::= { vrIpOspfVirtIfOperEntry 1 } vrIpOspfVirtIfEvents OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of state changes or error events on the virtual link." ::= { vrIpOspfVirtIfOperEntry 2 } -- Vr/<string> Ip Ospf Export/n -- Each instance of this component specifies an OSPF export policy. An -- OSPF export policy is used to decide if a route in the IP forwarding -- table should be blocked or advertised as OSPF external routes onto -- attached OSPF areas of the virtual router. -- Passport IP OSPF by default advertises all OSPF external routes based -- on the metric and tag in the IP forwarding table. vrIpOspfExport OBJECT IDENTIFIER ::= { vrIpOspf 8 } vrIpOspfExportRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfExportRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpOspfExport components." ::= { vrIpOspfExport 1 } vrIpOspfExportRowStatusEntry OBJECT-TYPE SYNTAX VrIpOspfExportRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpOspfExport component." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfExportIndex } ::= { vrIpOspfExportRowStatusTable 1 } VrIpOspfExportRowStatusEntry ::= SEQUENCE { vrIpOspfExportRowStatus RowStatus, vrIpOspfExportComponentName DisplayString, vrIpOspfExportStorageType StorageType, vrIpOspfExportIndex Integer32 } vrIpOspfExportRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpOspfExport components. These components can be added and deleted." ::= { vrIpOspfExportRowStatusEntry 1 } vrIpOspfExportComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpOspfExportRowStatusEntry 2 } vrIpOspfExportStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpOspfExport tables." ::= { vrIpOspfExportRowStatusEntry 4 } vrIpOspfExportIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpOspfExport tables." ::= { vrIpOspfExportRowStatusEntry 10 } vrIpOspfExportProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfExportProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This Group contains all the Provisioned attributes for the Export Component." ::= { vrIpOspfExport 10 } vrIpOspfExportProvEntry OBJECT-TYPE SYNTAX VrIpOspfExportProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfExportProvTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfExportIndex } ::= { vrIpOspfExportProvTable 1 } VrIpOspfExportProvEntry ::= SEQUENCE { vrIpOspfExportAdvertiseStatus INTEGER, vrIpOspfExportMetric INTEGER, vrIpOspfExportProtocol INTEGER, vrIpOspfExportRipInterface IpAddress, vrIpOspfExportRipNeighbor IpAddress, vrIpOspfExportEgpAsId Unsigned32, vrIpOspfExportTag Unsigned32, vrIpOspfExportExtLsaMetricType INTEGER, vrIpOspfExportBgpAsId Unsigned32, vrIpOspfExportBgpPeerIp IpAddress } vrIpOspfExportAdvertiseStatus OBJECT-TYPE SYNTAX INTEGER { send(1), block(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies if the routes that match this export policy are advertised (send) or not advertised (block)." DEFVAL { send } ::= { vrIpOspfExportProvEntry 1 } vrIpOspfExportMetric OBJECT-TYPE SYNTAX INTEGER (-1..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the metric to be used on the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of metric is ignored. The metric value is not used to select which routes to block or send, but rather the metric value advertised for the routes. A value of -1 indicates that the metric associated with the route in the forwarding table is used." DEFVAL { -1 } ::= { vrIpOspfExportProvEntry 2 } vrIpOspfExportProtocol OBJECT-TYPE SYNTAX INTEGER { all(1), egp(2), rip(3), staticLocal(6), staticRemote(7), bgpExternal(9) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the routes to which this export policy applies based on the routing protocol of how the routes are learned. If it is set to all, this export policy applies to all routes in the forwarding table." DEFVAL { all } ::= { vrIpOspfExportProvEntry 3 } vrIpOspfExportRipInterface OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP interface from which the routes are learned. This attribute can only be non zero when the protocol is set to rip. The value of 0.0.0.0 implies any RIP interface on the same virtual router; otherwise the value of this attribute must match the interface address of a LogicalIf that has a RipIf on the same virtual router." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrIpOspfExportProvEntry 4 } vrIpOspfExportRipNeighbor OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP neighbor of which the routes are learned from. This attribute can only be non zero when the protocol is set to rip. The value of 0.0.0.0 implies any RIP neighbor." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrIpOspfExportProvEntry 5 } vrIpOspfExportEgpAsId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the EGP learned routes to which this export policy applies, based on the EGP autonomous system identifier of which the routes are learned from. This attribute can only be non zero when protocol is set to egp. The value of 0 implies any EGP autonomous system; otherwise the value of this attribute must match the asId of an EGP neighbor on the same virtual router." DEFVAL { 0 } ::= { vrIpOspfExportProvEntry 6 } vrIpOspfExportTag OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the OSPF tag to be used on the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of tag is ignored. The tag value is not used to select which routes to block or send, but rather the tag value advertised for the routes. A value of 4294967295 indicates that the tag associated with the route in the forwarding table is used." DEFVAL { 4294967295 } ::= { vrIpOspfExportProvEntry 7 } vrIpOspfExportExtLsaMetricType OBJECT-TYPE SYNTAX INTEGER { useProtocolDefault(0), type1(1), type2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the metric type in the OSPF external link state advertisement of the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of extLsaMetricType is ignored. The extLsaMetricType value is not used to select which routes to block or send, but rather the metric value advertised for the routes. The value useProtocolDefault indicates the metric type is automatically chosen based on the routing protocol which the route was learned from." DEFVAL { useProtocolDefault } ::= { vrIpOspfExportProvEntry 8 } vrIpOspfExportBgpAsId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This key attribute specifies the bgp AS from which a bgp route is learned from. This key is used only if the protocol is bgpExternal. bgpAsId of value 0 mathces all ASs." DEFVAL { 0 } ::= { vrIpOspfExportProvEntry 9 } vrIpOspfExportBgpPeerIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This key attribute specifies the bgp peer where the routes were learned from. bgpPeerIp of 0 matches all bgp peers. This attribute is used as a key when protocol is set to bgpInternal or bgpExternal." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrIpOspfExportProvEntry 10 } -- This component identifies a set of attributes when matched determines -- the export policy applied. vrIpOspfExportNetList OBJECT IDENTIFIER ::= { vrIpOspfExport 2 } vrIpOspfExportNetListRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfExportNetListRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpOspfExportNetList components." ::= { vrIpOspfExportNetList 1 } vrIpOspfExportNetListRowStatusEntry OBJECT-TYPE SYNTAX VrIpOspfExportNetListRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpOspfExportNetList component." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfExportIndex, vrIpOspfExportNetListIndex } ::= { vrIpOspfExportNetListRowStatusTable 1 } VrIpOspfExportNetListRowStatusEntry ::= SEQUENCE { vrIpOspfExportNetListRowStatus RowStatus, vrIpOspfExportNetListComponentName DisplayString, vrIpOspfExportNetListStorageType StorageType, vrIpOspfExportNetListIndex Integer32 } vrIpOspfExportNetListRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpOspfExportNetList components. These components can be added and deleted." ::= { vrIpOspfExportNetListRowStatusEntry 1 } vrIpOspfExportNetListComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpOspfExportNetListRowStatusEntry 2 } vrIpOspfExportNetListStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpOspfExportNetList tables." ::= { vrIpOspfExportNetListRowStatusEntry 4 } vrIpOspfExportNetListIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpOspfExportNetList tables." ::= { vrIpOspfExportNetListRowStatusEntry 10 } vrIpOspfExportNetListProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfExportNetListProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group identifies the set of provisionable attributes for the ExportNetworkList component." ::= { vrIpOspfExportNetList 10 } vrIpOspfExportNetListProvEntry OBJECT-TYPE SYNTAX VrIpOspfExportNetListProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfExportNetListProvTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfExportIndex, vrIpOspfExportNetListIndex } ::= { vrIpOspfExportNetListProvTable 1 } VrIpOspfExportNetListProvEntry ::= SEQUENCE { vrIpOspfExportNetListIpAddress IpAddress, vrIpOspfExportNetListIpMask IpAddress } vrIpOspfExportNetListIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the 32 bit IP address to match against." ::= { vrIpOspfExportNetListProvEntry 1 } vrIpOspfExportNetListIpMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the IP Mask to be used with the IP Address to match against." ::= { vrIpOspfExportNetListProvEntry 2 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/<string> Ip Ospf VirtNbrEntry/<Ip Address>,<Ip Address> -- This component describes all of OSPF's Virtual Neighbors. vrIpOspfVirtNbr OBJECT IDENTIFIER ::= { vrIpOspf 9 } vrIpOspfVirtNbrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfVirtNbrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpOspfVirtNbr components." ::= { vrIpOspfVirtNbr 1 } vrIpOspfVirtNbrRowStatusEntry OBJECT-TYPE SYNTAX VrIpOspfVirtNbrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpOspfVirtNbr component." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfVirtNbrAreaIdIndex, vrIpOspfVirtNbrNbrRouterIdIndex } ::= { vrIpOspfVirtNbrRowStatusTable 1 } VrIpOspfVirtNbrRowStatusEntry ::= SEQUENCE { vrIpOspfVirtNbrRowStatus RowStatus, vrIpOspfVirtNbrComponentName DisplayString, vrIpOspfVirtNbrStorageType StorageType, vrIpOspfVirtNbrAreaIdIndex IpAddress, vrIpOspfVirtNbrNbrRouterIdIndex IpAddress } vrIpOspfVirtNbrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpOspfVirtNbr components. These components cannot be added nor deleted." ::= { vrIpOspfVirtNbrRowStatusEntry 1 } vrIpOspfVirtNbrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpOspfVirtNbrRowStatusEntry 2 } vrIpOspfVirtNbrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpOspfVirtNbr tables." ::= { vrIpOspfVirtNbrRowStatusEntry 4 } vrIpOspfVirtNbrAreaIdIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfVirtNbr tables." ::= { vrIpOspfVirtNbrRowStatusEntry 10 } vrIpOspfVirtNbrNbrRouterIdIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfVirtNbr tables." ::= { vrIpOspfVirtNbrRowStatusEntry 11 } vrIpOspfVirtNbrOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfVirtNbrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group identifies a set of operational attributes." ::= { vrIpOspfVirtNbr 10 } vrIpOspfVirtNbrOperEntry OBJECT-TYPE SYNTAX VrIpOspfVirtNbrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfVirtNbrOperTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfVirtNbrAreaIdIndex, vrIpOspfVirtNbrNbrRouterIdIndex } ::= { vrIpOspfVirtNbrOperTable 1 } VrIpOspfVirtNbrOperEntry ::= SEQUENCE { vrIpOspfVirtNbrNbrIpAddress IpAddress, vrIpOspfVirtNbrOptions Unsigned32, vrIpOspfVirtNbrState INTEGER, vrIpOspfVirtNbrEvents Counter32, vrIpOspfVirtNbrLsRetransQlen Gauge32, vrIpOspfVirtNbrExchangeStatus INTEGER } vrIpOspfVirtNbrNbrIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the Ip address this interface this virtual neighbor is using." ::= { vrIpOspfVirtNbrOperEntry 1 } vrIpOspfVirtNbrOptions OBJECT-TYPE SYNTAX Unsigned32 (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "A bit mask corresponding to the neighbor's options field. Bit 1, if set indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; i.e., that it implements OSPF Multicast Routing." ::= { vrIpOspfVirtNbrOperEntry 2 } vrIpOspfVirtNbrState OBJECT-TYPE SYNTAX INTEGER { down(1), attempt(2), init(3), twoWay(4), exchange(5), exchangeStatrt(6), loading(7), full(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the virtual neighbor relationship." ::= { vrIpOspfVirtNbrOperEntry 3 } vrIpOspfVirtNbrEvents OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this virtual link has changed its state, or an error has occurred." ::= { vrIpOspfVirtNbrOperEntry 4 } vrIpOspfVirtNbrLsRetransQlen OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The current length of the Retransmission queue." ::= { vrIpOspfVirtNbrOperEntry 5 } vrIpOspfVirtNbrExchangeStatus OBJECT-TYPE SYNTAX INTEGER { master(1), slave(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the exchange status of the entry in this table." ::= { vrIpOspfVirtNbrOperEntry 6 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/<string> Ip Ospf NbrEntry/<Ip Address>,<Decimal> -- This component is a dynamic subcomponent of OSPF that describes all -- the OSPF Neighbors. vrIpOspfNbr OBJECT IDENTIFIER ::= { vrIpOspf 10 } vrIpOspfNbrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfNbrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpOspfNbr components." ::= { vrIpOspfNbr 1 } vrIpOspfNbrRowStatusEntry OBJECT-TYPE SYNTAX VrIpOspfNbrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpOspfNbr component." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfNbrAddressIndex, vrIpOspfNbrAddressLessIndex } ::= { vrIpOspfNbrRowStatusTable 1 } VrIpOspfNbrRowStatusEntry ::= SEQUENCE { vrIpOspfNbrRowStatus RowStatus, vrIpOspfNbrComponentName DisplayString, vrIpOspfNbrStorageType StorageType, vrIpOspfNbrAddressIndex IpAddress, vrIpOspfNbrAddressLessIndex Integer32 } vrIpOspfNbrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpOspfNbr components. These components cannot be added nor deleted." ::= { vrIpOspfNbrRowStatusEntry 1 } vrIpOspfNbrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpOspfNbrRowStatusEntry 2 } vrIpOspfNbrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpOspfNbr tables." ::= { vrIpOspfNbrRowStatusEntry 4 } vrIpOspfNbrAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfNbr tables." ::= { vrIpOspfNbrRowStatusEntry 10 } vrIpOspfNbrAddressLessIndex OBJECT-TYPE SYNTAX Integer32 (0) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfNbr tables." ::= { vrIpOspfNbrRowStatusEntry 11 } vrIpOspfNbrOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfNbrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group identifies the operational set of attributes for the NeighborEntry." ::= { vrIpOspfNbr 10 } vrIpOspfNbrOperEntry OBJECT-TYPE SYNTAX VrIpOspfNbrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfNbrOperTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfNbrAddressIndex, vrIpOspfNbrAddressLessIndex } ::= { vrIpOspfNbrOperTable 1 } VrIpOspfNbrOperEntry ::= SEQUENCE { vrIpOspfNbrRtrId IpAddress, vrIpOspfNbrOptions Unsigned32, vrIpOspfNbrPriority Unsigned32, vrIpOspfNbrState INTEGER, vrIpOspfNbrEvents Counter32, vrIpOspfNbrLsRetransQlen Gauge32, vrIpOspfNbrNbmaNbrStatus INTEGER, vrIpOspfNbrExchangeStatus INTEGER, vrIpOspfNbrPermanence INTEGER } vrIpOspfNbrRtrId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "An Ip Address that uniquely identifies the neighboring router in the autonomous system." ::= { vrIpOspfNbrOperEntry 1 } vrIpOspfNbrOptions OBJECT-TYPE SYNTAX Unsigned32 (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "A bit mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information, if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; i.e., that it implements OSPF Multicast Routing." ::= { vrIpOspfNbrOperEntry 2 } vrIpOspfNbrPriority OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network." ::= { vrIpOspfNbrOperEntry 3 } vrIpOspfNbrState OBJECT-TYPE SYNTAX INTEGER { down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the relationship with this neighbor." ::= { vrIpOspfNbrOperEntry 4 } vrIpOspfNbrEvents OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this neighbor relationship has changed state, or an error has occurred." ::= { vrIpOspfNbrOperEntry 5 } vrIpOspfNbrLsRetransQlen OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The current length of the Retransmission queue." ::= { vrIpOspfNbrOperEntry 6 } vrIpOspfNbrNbmaNbrStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute describes the status of the entry." ::= { vrIpOspfNbrOperEntry 7 } vrIpOspfNbrExchangeStatus OBJECT-TYPE SYNTAX INTEGER { master(1), slave(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the exchange status for a neighbor entry." ::= { vrIpOspfNbrOperEntry 8 } vrIpOspfNbrPermanence OBJECT-TYPE SYNTAX INTEGER { dynamic(1), permanent(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays how the neighbor became an entry." DEFVAL { dynamic } ::= { vrIpOspfNbrOperEntry 11 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/<string> Ip Ospf LsdbEntry/<Ip Address>,<Decimal>, -- <Ip Address>, <Ip Address> -- This dynamic component contains the Link State Advertiements (LSA) -- from all areas the device is connected to. vrIpOspfLsdb OBJECT IDENTIFIER ::= { vrIpOspf 11 } vrIpOspfLsdbRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfLsdbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpOspfLsdb components." ::= { vrIpOspfLsdb 1 } vrIpOspfLsdbRowStatusEntry OBJECT-TYPE SYNTAX VrIpOspfLsdbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpOspfLsdb component." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfLsdbAreaIdIndex, vrIpOspfLsdbLsdbTypeIndex, vrIpOspfLsdbLsIdIndex, vrIpOspfLsdbRouterIdIndex } ::= { vrIpOspfLsdbRowStatusTable 1 } VrIpOspfLsdbRowStatusEntry ::= SEQUENCE { vrIpOspfLsdbRowStatus RowStatus, vrIpOspfLsdbComponentName DisplayString, vrIpOspfLsdbStorageType StorageType, vrIpOspfLsdbAreaIdIndex IpAddress, vrIpOspfLsdbLsdbTypeIndex Integer32, vrIpOspfLsdbLsIdIndex IpAddress, vrIpOspfLsdbRouterIdIndex IpAddress } vrIpOspfLsdbRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpOspfLsdb components. These components cannot be added nor deleted." ::= { vrIpOspfLsdbRowStatusEntry 1 } vrIpOspfLsdbComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpOspfLsdbRowStatusEntry 2 } vrIpOspfLsdbStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpOspfLsdb tables." ::= { vrIpOspfLsdbRowStatusEntry 4 } vrIpOspfLsdbAreaIdIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfLsdb tables." ::= { vrIpOspfLsdbRowStatusEntry 10 } vrIpOspfLsdbLsdbTypeIndex OBJECT-TYPE SYNTAX Integer32 (1..7) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfLsdb tables." ::= { vrIpOspfLsdbRowStatusEntry 11 } vrIpOspfLsdbLsIdIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfLsdb tables." ::= { vrIpOspfLsdbRowStatusEntry 12 } vrIpOspfLsdbRouterIdIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfLsdb tables." ::= { vrIpOspfLsdbRowStatusEntry 13 } vrIpOspfLsdbOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfLsdbOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group describes the Operational set of attributes for the LsdbEntry." ::= { vrIpOspfLsdb 10 } vrIpOspfLsdbOperEntry OBJECT-TYPE SYNTAX VrIpOspfLsdbOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfLsdbOperTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfLsdbAreaIdIndex, vrIpOspfLsdbLsdbTypeIndex, vrIpOspfLsdbLsIdIndex, vrIpOspfLsdbRouterIdIndex } ::= { vrIpOspfLsdbOperTable 1 } VrIpOspfLsdbOperEntry ::= SEQUENCE { vrIpOspfLsdbSequence Unsigned32, vrIpOspfLsdbAge Gauge32, vrIpOspfLsdbChecksum Unsigned32, vrIpOspfLsdbAdvertisement HexString } vrIpOspfLsdbSequence OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "A signed 32-bit integer, used to detect old and duplicate LSAs. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement." ::= { vrIpOspfLsdbOperEntry 1 } vrIpOspfLsdbAge OBJECT-TYPE SYNTAX Gauge32 (0..3600) ACCESS read-only STATUS mandatory DESCRIPTION "The age of the Link State Advertisement in seconds." ::= { vrIpOspfLsdbOperEntry 2 } vrIpOspfLsdbChecksum OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The checksum of the complete contents of the advertisement, excepting the age field. The checksum used is the Fletcher checksum." ::= { vrIpOspfLsdbOperEntry 3 } vrIpOspfLsdbAdvertisement OBJECT-TYPE SYNTAX HexString (SIZE (1..1024)) ACCESS read-only STATUS mandatory DESCRIPTION "The entire LSA including its header." ::= { vrIpOspfLsdbOperEntry 4 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/<string> Ip Ospf ExtLsdbEntry/<Decimal>, <Ip Address>, -- <Ip Address> -- This dynamic component contains the Link State Advertiements(LSA) -- from other Autonomous systems. It is identical in format to the Lsdb. -- The purpose is to allow all external LSAs to be displayed together rather -- than distributed over the different non-stub areas. vrIpOspfExtLsdb OBJECT IDENTIFIER ::= { vrIpOspf 12 } vrIpOspfExtLsdbRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfExtLsdbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpOspfExtLsdb components." ::= { vrIpOspfExtLsdb 1 } vrIpOspfExtLsdbRowStatusEntry OBJECT-TYPE SYNTAX VrIpOspfExtLsdbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpOspfExtLsdb component." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfExtLsdbLsdbTypeIndex, vrIpOspfExtLsdbLsIdIndex, vrIpOspfExtLsdbRouterIdIndex } ::= { vrIpOspfExtLsdbRowStatusTable 1 } VrIpOspfExtLsdbRowStatusEntry ::= SEQUENCE { vrIpOspfExtLsdbRowStatus RowStatus, vrIpOspfExtLsdbComponentName DisplayString, vrIpOspfExtLsdbStorageType StorageType, vrIpOspfExtLsdbLsdbTypeIndex Integer32, vrIpOspfExtLsdbLsIdIndex IpAddress, vrIpOspfExtLsdbRouterIdIndex IpAddress } vrIpOspfExtLsdbRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpOspfExtLsdb components. These components cannot be added nor deleted." ::= { vrIpOspfExtLsdbRowStatusEntry 1 } vrIpOspfExtLsdbComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpOspfExtLsdbRowStatusEntry 2 } vrIpOspfExtLsdbStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpOspfExtLsdb tables." ::= { vrIpOspfExtLsdbRowStatusEntry 4 } vrIpOspfExtLsdbLsdbTypeIndex OBJECT-TYPE SYNTAX Integer32 (1..7) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfExtLsdb tables." ::= { vrIpOspfExtLsdbRowStatusEntry 10 } vrIpOspfExtLsdbLsIdIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfExtLsdb tables." ::= { vrIpOspfExtLsdbRowStatusEntry 11 } vrIpOspfExtLsdbRouterIdIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpOspfExtLsdb tables." ::= { vrIpOspfExtLsdbRowStatusEntry 12 } vrIpOspfExtLsdbOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpOspfExtLsdbOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group describes the operational set of attributes for the ExtLsdbEntry." ::= { vrIpOspfExtLsdb 10 } vrIpOspfExtLsdbOperEntry OBJECT-TYPE SYNTAX VrIpOspfExtLsdbOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpOspfExtLsdbOperTable." INDEX { vrIndex, vrIpIndex, vrIpOspfIndex, vrIpOspfExtLsdbLsdbTypeIndex, vrIpOspfExtLsdbLsIdIndex, vrIpOspfExtLsdbRouterIdIndex } ::= { vrIpOspfExtLsdbOperTable 1 } VrIpOspfExtLsdbOperEntry ::= SEQUENCE { vrIpOspfExtLsdbSequence Unsigned32, vrIpOspfExtLsdbAge Gauge32, vrIpOspfExtLsdbChecksum Unsigned32, vrIpOspfExtLsdbAdvertisement HexString } vrIpOspfExtLsdbSequence OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "A signed 32-bit integer, used to detect old and duplicate LSAs. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement." ::= { vrIpOspfExtLsdbOperEntry 1 } vrIpOspfExtLsdbAge OBJECT-TYPE SYNTAX Gauge32 (0..3600) ACCESS read-only STATUS mandatory DESCRIPTION "The age of the Link State Advertisement in seconds." ::= { vrIpOspfExtLsdbOperEntry 2 } vrIpOspfExtLsdbChecksum OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The checksum of the complete contents of the advertisement, excepting the age field. The checksum used is the Fletcher checksum." ::= { vrIpOspfExtLsdbOperEntry 3 } vrIpOspfExtLsdbAdvertisement OBJECT-TYPE SYNTAX HexString (SIZE (1..36)) ACCESS read-only STATUS mandatory DESCRIPTION "The entire LSA including its header." ::= { vrIpOspfExtLsdbOperEntry 4 } -- Vr/<string> Ip Rip -- This component represents the Routing Information Protocol for the IP. -- There should be at least one RipInterface provisioned below a LogicalIf -- under an IpPort. vrIpRip OBJECT IDENTIFIER ::= { vrIp 8 } vrIpRipRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRipRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpRip components." ::= { vrIpRip 1 } vrIpRipRowStatusEntry OBJECT-TYPE SYNTAX VrIpRipRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpRip component." INDEX { vrIndex, vrIpIndex, vrIpRipIndex } ::= { vrIpRipRowStatusTable 1 } VrIpRipRowStatusEntry ::= SEQUENCE { vrIpRipRowStatus RowStatus, vrIpRipComponentName DisplayString, vrIpRipStorageType StorageType, vrIpRipIndex NonReplicated } vrIpRipRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpRip components. These components can be added and deleted." ::= { vrIpRipRowStatusEntry 1 } vrIpRipComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpRipRowStatusEntry 2 } vrIpRipStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpRip tables." ::= { vrIpRipRowStatusEntry 4 } vrIpRipIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpRip tables." ::= { vrIpRipRowStatusEntry 10 } vrIpRipProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRipProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the RIP component" ::= { vrIpRip 10 } vrIpRipProvEntry OBJECT-TYPE SYNTAX VrIpRipProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpRipProvTable." INDEX { vrIndex, vrIpIndex, vrIpRipIndex } ::= { vrIpRipProvTable 1 } VrIpRipProvEntry ::= SEQUENCE { vrIpRipMigrateRip INTEGER, vrIpRipRfc1058MetricUsage INTEGER, vrIpRipGenerateDiscardRoute INTEGER, vrIpRipRipUpdate INTEGER, vrIpRipRipTimeout INTEGER, vrIpRipGarbageCollectTimer INTEGER } vrIpRipMigrateRip OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute sets the preference level of OSPF-internal routes to be less preferred than RIP. Note: This parameter should only be used when starting migration of network from RIP to OSPF. When ready to cutover to OSPF, set this attribute value to disabled and run under normal preferences. All OSPF routers in the Autonomous System should be running with migrateRip enabled or with migrateRip disabled to prevent routing loops. It is important that the changeover period from RIP to OSPF be performed quickly on all OSPF routers so that no routing loops are formed. These routing loops could be caused by conflicts in the internal RIP and OSPF databases." DEFVAL { disabled } ::= { vrIpRipProvEntry 2 } vrIpRipRfc1058MetricUsage OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute determines the metric usage for this RIP instance. This flag is used to determine the way metrics are incremented. RFC1058 way : Sending Update: This is to use the metric for the route from the routing table as the advertised metric to be sent for that route. Nothing is ever added to this value from the sending side. The only special case handling is that if the route being advertised is the network route of a directly connectednetwork, the metric in the routing table will be zero. Then the RipIf interface metric for the interface being advertised is used as the advertise metric. If the interface being advertised is not a Rip interface, then metric value of 1 is used. Receiving Update: Add receiving interface's RIP metric to the metric for the route in the received advertisement and install the result in the receiver's routing table as the metric for that route. Older way: Sending Updates: Add the out going interfaces rip metric to the metric for a route in the routing table to form the metric to be advertised for that route. Receiving Updates: The metric received in the advertisement for a route is put directly in the routing table as the metric for that route. Note: It is recommended that, all the routers in this autonomous system should be following the rfc1058 metric system. Setting this flag to disabled will have the effect of running the RIP with old metric incrementing system." DEFVAL { enabled } ::= { vrIpRipProvEntry 3 } vrIpRipGenerateDiscardRoute OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute when set to yes will add network disacrd routes to the routing and forwarding table for the subnetted interfaces that are running RIP." DEFVAL { yes } ::= { vrIpRipProvEntry 4 } vrIpRipRipUpdate OBJECT-TYPE SYNTAX INTEGER (15..500) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute sets the interval for sending updates bewteen RIP neighbours. Set this attribute with a value less than that of the timeout and garbage collect timers. The ripUpdate timer starts when a route comes up and when updates are received." DEFVAL { 30 } ::= { vrIpRipProvEntry 5 } vrIpRipRipTimeout OBJECT-TYPE SYNTAX INTEGER (15..500) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute sets the RIP timeout interval. If this timer expires, the route is no longer valid. The ripTimeout timer starts when a route comes up and when updates are received." DEFVAL { 180 } ::= { vrIpRipProvEntry 6 } vrIpRipGarbageCollectTimer OBJECT-TYPE SYNTAX INTEGER (15..500) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute sets the interval between a route's timeout expiring and the deletion of that route's information from the routing table. The garbage collect timer starts when the ripTimeout period expires." DEFVAL { 120 } ::= { vrIpRipProvEntry 7 } vrIpRipStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRipStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrIpRip 11 } vrIpRipStateEntry OBJECT-TYPE SYNTAX VrIpRipStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpRipStateTable." INDEX { vrIndex, vrIpIndex, vrIpRipIndex } ::= { vrIpRipStateTable 1 } VrIpRipStateEntry ::= SEQUENCE { vrIpRipAdminState INTEGER, vrIpRipOperationalState INTEGER, vrIpRipUsageState INTEGER } vrIpRipAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrIpRipStateEntry 1 } vrIpRipOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrIpRipStateEntry 2 } vrIpRipUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrIpRipStateEntry 3 } vrIpRipAdminControlTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRipAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component." ::= { vrIpRip 12 } vrIpRipAdminControlEntry OBJECT-TYPE SYNTAX VrIpRipAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpRipAdminControlTable." INDEX { vrIndex, vrIpIndex, vrIpRipIndex } ::= { vrIpRipAdminControlTable 1 } VrIpRipAdminControlEntry ::= SEQUENCE { vrIpRipSnmpAdminStatus INTEGER } vrIpRipSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpRipAdminControlEntry 1 } vrIpRipOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRipOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { vrIpRip 15 } vrIpRipOperStatusEntry OBJECT-TYPE SYNTAX VrIpRipOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpRipOperStatusTable." INDEX { vrIndex, vrIpIndex, vrIpRipIndex } ::= { vrIpRipOperStatusTable 1 } VrIpRipOperStatusEntry ::= SEQUENCE { vrIpRipSnmpOperStatus INTEGER } vrIpRipSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpRipOperStatusEntry 1 } vrIpRipOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRipOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines a set of operational attributes belonging to the RIP component. It corresponds to the rip2Globals table in the RIP-2 standard MIB." ::= { vrIpRip 16 } vrIpRipOperEntry OBJECT-TYPE SYNTAX VrIpRipOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpRipOperTable." INDEX { vrIndex, vrIpIndex, vrIpRipIndex } ::= { vrIpRipOperTable 1 } VrIpRipOperEntry ::= SEQUENCE { vrIpRipRouteChangesMade Counter32, vrIpRipQueryResponses Counter32 } vrIpRipRouteChangesMade OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the route changes made to the IP Route Database by Rip. This does not include the refresh of the route's age." ::= { vrIpRipOperEntry 1 } vrIpRipQueryResponses OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the responses sent to RIP queries from other systems." ::= { vrIpRipOperEntry 2 } -- Vr/<string> Ip Rip Import/<Decimal> -- This component controls the functionality of Route Leaking. In other -- words, this component will determine what routes are used by RIP. vrIpRipImport OBJECT IDENTIFIER ::= { vrIpRip 2 } vrIpRipImportRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRipImportRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpRipImport components." ::= { vrIpRipImport 1 } vrIpRipImportRowStatusEntry OBJECT-TYPE SYNTAX VrIpRipImportRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpRipImport component." INDEX { vrIndex, vrIpIndex, vrIpRipIndex, vrIpRipImportIndex } ::= { vrIpRipImportRowStatusTable 1 } VrIpRipImportRowStatusEntry ::= SEQUENCE { vrIpRipImportRowStatus RowStatus, vrIpRipImportComponentName DisplayString, vrIpRipImportStorageType StorageType, vrIpRipImportIndex Integer32 } vrIpRipImportRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpRipImport components. These components can be added and deleted." ::= { vrIpRipImportRowStatusEntry 1 } vrIpRipImportComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpRipImportRowStatusEntry 2 } vrIpRipImportStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpRipImport tables." ::= { vrIpRipImportRowStatusEntry 4 } vrIpRipImportIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpRipImport tables." ::= { vrIpRipImportRowStatusEntry 10 } vrIpRipImportProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRipImportProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the group of provisionable attributes for the XXXX Import Subcomponent." ::= { vrIpRipImport 10 } vrIpRipImportProvEntry OBJECT-TYPE SYNTAX VrIpRipImportProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpRipImportProvTable." INDEX { vrIndex, vrIpIndex, vrIpRipIndex, vrIpRipImportIndex } ::= { vrIpRipImportProvTable 1 } VrIpRipImportProvEntry ::= SEQUENCE { vrIpRipImportUsageFlag INTEGER, vrIpRipImportImportMetric Unsigned32, vrIpRipImportNeighbor IpAddress, vrIpRipImportInterface IpAddress } vrIpRipImportUsageFlag OBJECT-TYPE SYNTAX INTEGER { use(1), ignore(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This flag when set to ignore indicates the routes that are not used and if set to use, indicates the routes which are used." DEFVAL { use } ::= { vrIpRipImportProvEntry 1 } vrIpRipImportImportMetric OBJECT-TYPE SYNTAX Unsigned32 (0..16) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to override the default import metric for the RIP protocol. This value is not used to select which routes to use or ignore, rather it is the metric to be used in the routing table for the routes imported for this import policy. A value of zero indicates that the metric received in the update will be used." DEFVAL { 0 } ::= { vrIpRipImportProvEntry 2 } vrIpRipImportNeighbor OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the IP Address of the neighbor this policy will apply to." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrIpRipImportProvEntry 3 } vrIpRipImportInterface OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the RIP interface to which this import policy applies. The value of 0.0.0.0 implies any RIP interface on the virtual router; otherwise the value of this attribute must match the interface address of a LogicalIf that has a RipIf on the same virtual router." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrIpRipImportProvEntry 4 } -- Vr/<string> Ip Rip Import/<Decimal> NetworkList/<Decimal> -- This component identifies a set of networks that this Import policy will -- apply to. vrIpRipImportNet OBJECT IDENTIFIER ::= { vrIpRipImport 2 } vrIpRipImportNetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRipImportNetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpRipImportNet components." ::= { vrIpRipImportNet 1 } vrIpRipImportNetRowStatusEntry OBJECT-TYPE SYNTAX VrIpRipImportNetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpRipImportNet component." INDEX { vrIndex, vrIpIndex, vrIpRipIndex, vrIpRipImportIndex, vrIpRipImportNetIndex } ::= { vrIpRipImportNetRowStatusTable 1 } VrIpRipImportNetRowStatusEntry ::= SEQUENCE { vrIpRipImportNetRowStatus RowStatus, vrIpRipImportNetComponentName DisplayString, vrIpRipImportNetStorageType StorageType, vrIpRipImportNetIndex Integer32 } vrIpRipImportNetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpRipImportNet components. These components can be added and deleted." ::= { vrIpRipImportNetRowStatusEntry 1 } vrIpRipImportNetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpRipImportNetRowStatusEntry 2 } vrIpRipImportNetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpRipImportNet tables." ::= { vrIpRipImportNetRowStatusEntry 4 } vrIpRipImportNetIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpRipImportNet tables." ::= { vrIpRipImportNetRowStatusEntry 10 } vrIpRipImportNetProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRipImportNetProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains attributes for the XXXX NetworkList component for the Import Policy to be applied to" ::= { vrIpRipImportNet 10 } vrIpRipImportNetProvEntry OBJECT-TYPE SYNTAX VrIpRipImportNetProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpRipImportNetProvTable." INDEX { vrIndex, vrIpIndex, vrIpRipIndex, vrIpRipImportIndex, vrIpRipImportNetIndex } ::= { vrIpRipImportNetProvTable 1 } VrIpRipImportNetProvEntry ::= SEQUENCE { vrIpRipImportNetIpAddress IpAddress, vrIpRipImportNetIpMask IpAddress } vrIpRipImportNetIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the IP address that needs to be matched against in this network list for the Import Policy to be applied to." ::= { vrIpRipImportNetProvEntry 1 } vrIpRipImportNetIpMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the IP mask for the attribute ipAddress." ::= { vrIpRipImportNetProvEntry 2 } -- Vr/<string> Ip Rip Export/<Decimal> -- Each instance of this component specifies a RIP export policy. A RIP -- export policy is used to decide if a route in the IP forwarding table -- should be blocked or advertised as a RIP route on one or all RIP -- interfaces of the virtual router. -- Passport IP RIP by default advertises all local routes and all RIP learned -- routes to all RIP interfaces based on the metric in the IP forwarding -- table. vrIpRipExport OBJECT IDENTIFIER ::= { vrIpRip 3 } vrIpRipExportRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRipExportRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpRipExport components." ::= { vrIpRipExport 1 } vrIpRipExportRowStatusEntry OBJECT-TYPE SYNTAX VrIpRipExportRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpRipExport component." INDEX { vrIndex, vrIpIndex, vrIpRipIndex, vrIpRipExportIndex } ::= { vrIpRipExportRowStatusTable 1 } VrIpRipExportRowStatusEntry ::= SEQUENCE { vrIpRipExportRowStatus RowStatus, vrIpRipExportComponentName DisplayString, vrIpRipExportStorageType StorageType, vrIpRipExportIndex Integer32 } vrIpRipExportRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpRipExport components. These components can be added and deleted." ::= { vrIpRipExportRowStatusEntry 1 } vrIpRipExportComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpRipExportRowStatusEntry 2 } vrIpRipExportStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpRipExport tables." ::= { vrIpRipExportRowStatusEntry 4 } vrIpRipExportIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpRipExport tables." ::= { vrIpRipExportRowStatusEntry 10 } vrIpRipExportProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRipExportProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains all the provisioned attributes for the Export component." ::= { vrIpRipExport 10 } vrIpRipExportProvEntry OBJECT-TYPE SYNTAX VrIpRipExportProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpRipExportProvTable." INDEX { vrIndex, vrIpIndex, vrIpRipIndex, vrIpRipExportIndex } ::= { vrIpRipExportProvTable 1 } VrIpRipExportProvEntry ::= SEQUENCE { vrIpRipExportAdvertiseStatus INTEGER, vrIpRipExportExportMetric Unsigned32, vrIpRipExportProtocol INTEGER, vrIpRipExportRipInterface IpAddress, vrIpRipExportEgpAsId Unsigned32, vrIpRipExportOspfTag Unsigned32, vrIpRipExportOutInterface IpAddress, vrIpRipExportBgpAsId Unsigned32 } vrIpRipExportAdvertiseStatus OBJECT-TYPE SYNTAX INTEGER { send(1), block(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies if the routes that match this export policy are advertised (send) or not advertised (block)." DEFVAL { send } ::= { vrIpRipExportProvEntry 1 } vrIpRipExportExportMetric OBJECT-TYPE SYNTAX Unsigned32 (0..16) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the metric to be used on the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of exportMetric is ignored. The exportMetric value is not used to select which routes to block or send, but rather the metric value advertised for the routes. A value of 0 indicates that the metric associated with the route in the forwarding table is used." DEFVAL { 0 } ::= { vrIpRipExportProvEntry 2 } vrIpRipExportProtocol OBJECT-TYPE SYNTAX INTEGER { all(1), egp(2), rip(3), ospfInternal(4), ospfExternal(5), staticLocal(6), staticRemote(7), bgpInternal(8), bgpExternal(9) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the routes to which this export policy applies based on the routing protocol of how the routes are learned. If it is set to all, this export policy applies to all routes in the forwarding table." DEFVAL { all } ::= { vrIpRipExportProvEntry 3 } vrIpRipExportRipInterface OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP interface from which the routes are learned. This attribute can only be non zero when the protocol is set to rip. The value of 0.0.0.0 implies any RIP interface on the same virtual router; otherwise the value of this attribute must match the interface address of a LogicalIf that has a RipIf on the same virtual router. DESCRIPTION" DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrIpRipExportProvEntry 4 } vrIpRipExportEgpAsId OBJECT-TYPE SYNTAX Unsigned32 (0..65536) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the EGP learned routes to which this export policy applies, based on the EGP autonomous system identifier of which the routes are learned from. This attribute can only be non zero when protocol is set to egp. The value of 0 implies any EGP autonomous system; otherwise the value of this attribute must match the asId of an EGP neighbor on the same virtual router." DEFVAL { 0 } ::= { vrIpRipExportProvEntry 5 } vrIpRipExportOspfTag OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the OSPF learned external routes to which this export policy applies, based on the learned OSPF tag of the routes. This attribute can only be set to a non default value when protocol is set to ospfExternal. The default value of 4294967295 implies any tag." DEFVAL { 4294967295 } ::= { vrIpRipExportProvEntry 6 } vrIpRipExportOutInterface OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the RIP interface on the virtual router which routes are exported onto as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of outInterface is ignored. The outInterface value is not used to select which routes to block or send, but rather where to export the routes. A value of 0.0.0.0 indicates that the routes are exported to all RIP interfaces on the virtual router. Otherwise, the value of this attribute must match the interface address of a LogicalIf that has a RipIf on the same virtual router." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrIpRipExportProvEntry 7 } vrIpRipExportBgpAsId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This key attribute specifies the BGP AS from which the routes are learned. This key will be used only when the protocol is set to bgpExternal. bgpAsId of 0 matches all BGP ASs." DEFVAL { 0 } ::= { vrIpRipExportProvEntry 8 } -- Vr/<string> Ip Rip Export/<Decimal> NetworkList/<Decimal> -- This component identifies a set of attributes when matched determines -- the export policy applied. vrIpRipExportNet OBJECT IDENTIFIER ::= { vrIpRipExport 2 } vrIpRipExportNetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRipExportNetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpRipExportNet components." ::= { vrIpRipExportNet 1 } vrIpRipExportNetRowStatusEntry OBJECT-TYPE SYNTAX VrIpRipExportNetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpRipExportNet component." INDEX { vrIndex, vrIpIndex, vrIpRipIndex, vrIpRipExportIndex, vrIpRipExportNetIndex } ::= { vrIpRipExportNetRowStatusTable 1 } VrIpRipExportNetRowStatusEntry ::= SEQUENCE { vrIpRipExportNetRowStatus RowStatus, vrIpRipExportNetComponentName DisplayString, vrIpRipExportNetStorageType StorageType, vrIpRipExportNetIndex Integer32 } vrIpRipExportNetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpRipExportNet components. These components can be added and deleted." ::= { vrIpRipExportNetRowStatusEntry 1 } vrIpRipExportNetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpRipExportNetRowStatusEntry 2 } vrIpRipExportNetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpRipExportNet tables." ::= { vrIpRipExportNetRowStatusEntry 4 } vrIpRipExportNetIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpRipExportNet tables." ::= { vrIpRipExportNetRowStatusEntry 10 } vrIpRipExportNetProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRipExportNetProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group identifies the set of Provisionable attributes for the ExportNetworkList component." ::= { vrIpRipExportNet 10 } vrIpRipExportNetProvEntry OBJECT-TYPE SYNTAX VrIpRipExportNetProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpRipExportNetProvTable." INDEX { vrIndex, vrIpIndex, vrIpRipIndex, vrIpRipExportIndex, vrIpRipExportNetIndex } ::= { vrIpRipExportNetProvTable 1 } VrIpRipExportNetProvEntry ::= SEQUENCE { vrIpRipExportNetIpAddress IpAddress, vrIpRipExportNetIpMask IpAddress } vrIpRipExportNetIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the 32 bit IP address to match against." ::= { vrIpRipExportNetProvEntry 1 } vrIpRipExportNetIpMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the IP Mask to be used with the IP Address to match against." ::= { vrIpRipExportNetProvEntry 2 } -- Vr/<string> Ip Static -- The Static component is used to configure addition, deletion and -- modification of static routing information. vrIpStatic OBJECT IDENTIFIER ::= { vrIp 9 } vrIpStaticRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpStaticRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpStatic components." ::= { vrIpStatic 1 } vrIpStaticRowStatusEntry OBJECT-TYPE SYNTAX VrIpStaticRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpStatic component." INDEX { vrIndex, vrIpIndex, vrIpStaticIndex } ::= { vrIpStaticRowStatusTable 1 } VrIpStaticRowStatusEntry ::= SEQUENCE { vrIpStaticRowStatus RowStatus, vrIpStaticComponentName DisplayString, vrIpStaticStorageType StorageType, vrIpStaticIndex NonReplicated } vrIpStaticRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpStatic components. These components can be added and deleted." ::= { vrIpStaticRowStatusEntry 1 } vrIpStaticComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpStaticRowStatusEntry 2 } vrIpStaticStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpStatic tables." ::= { vrIpStaticRowStatusEntry 4 } vrIpStaticIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpStatic tables." ::= { vrIpStaticRowStatusEntry 10 } vrIpStaticStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpStaticStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrIpStatic 10 } vrIpStaticStateEntry OBJECT-TYPE SYNTAX VrIpStaticStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpStaticStateTable." INDEX { vrIndex, vrIpIndex, vrIpStaticIndex } ::= { vrIpStaticStateTable 1 } VrIpStaticStateEntry ::= SEQUENCE { vrIpStaticAdminState INTEGER, vrIpStaticOperationalState INTEGER, vrIpStaticUsageState INTEGER } vrIpStaticAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrIpStaticStateEntry 1 } vrIpStaticOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrIpStaticStateEntry 2 } vrIpStaticUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrIpStaticStateEntry 3 } -- Vr/<string> Ip Static RouteEntry/<Ip Address>, <Ip Address>, -- <Decimal> -- This component describes the IP static routes. -- -- For a RouteEntry to be valid, there should be at least one NextHop -- provisioned. Up to three NextHops can be provisioned for each instance -- of a RouteEntry. -- -- The value of index destMask should be contiguous. -- -- Only the value zero is supported. Zero will be substituted for any value -- that is entered. vrIpStaticRoute OBJECT IDENTIFIER ::= { vrIpStatic 2 } vrIpStaticRouteRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpStaticRouteRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpStaticRoute components." ::= { vrIpStaticRoute 1 } vrIpStaticRouteRowStatusEntry OBJECT-TYPE SYNTAX VrIpStaticRouteRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpStaticRoute component." INDEX { vrIndex, vrIpIndex, vrIpStaticIndex, vrIpStaticRouteDestAddressIndex, vrIpStaticRouteDestMaskIndex, vrIpStaticRouteTypeOfServiceIndex } ::= { vrIpStaticRouteRowStatusTable 1 } VrIpStaticRouteRowStatusEntry ::= SEQUENCE { vrIpStaticRouteRowStatus RowStatus, vrIpStaticRouteComponentName DisplayString, vrIpStaticRouteStorageType StorageType, vrIpStaticRouteDestAddressIndex IpAddress, vrIpStaticRouteDestMaskIndex IpAddress, vrIpStaticRouteTypeOfServiceIndex Integer32 } vrIpStaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpStaticRoute components. These components can be added and deleted." ::= { vrIpStaticRouteRowStatusEntry 1 } vrIpStaticRouteComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpStaticRouteRowStatusEntry 2 } vrIpStaticRouteStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpStaticRoute tables." ::= { vrIpStaticRouteRowStatusEntry 4 } vrIpStaticRouteDestAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpStaticRoute tables." ::= { vrIpStaticRouteRowStatusEntry 10 } vrIpStaticRouteDestMaskIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpStaticRoute tables." ::= { vrIpStaticRouteRowStatusEntry 11 } vrIpStaticRouteTypeOfServiceIndex OBJECT-TYPE SYNTAX Integer32 (0..0) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpStaticRoute tables." ::= { vrIpStaticRouteRowStatusEntry 12 } vrIpStaticRouteProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpStaticRouteProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains a provisionable set of attributes for the static route entry component." ::= { vrIpStaticRoute 10 } vrIpStaticRouteProvEntry OBJECT-TYPE SYNTAX VrIpStaticRouteProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpStaticRouteProvTable." INDEX { vrIndex, vrIpIndex, vrIpStaticIndex, vrIpStaticRouteDestAddressIndex, vrIpStaticRouteDestMaskIndex, vrIpStaticRouteTypeOfServiceIndex } ::= { vrIpStaticRouteProvTable 1 } VrIpStaticRouteProvEntry ::= SEQUENCE { vrIpStaticRoutePreferredOver INTEGER } vrIpStaticRoutePreferredOver OBJECT-TYPE SYNTAX INTEGER { intOspf(5), extOspf(72) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the preference of the static route in comparison with the OSPF route. intOspf means that the static route is chosen over the OSPF internal route, while extOspf means that the OSPF internal route is chosen over the static route. The default static route preference is set to extOspf ." DEFVAL { extOspf } ::= { vrIpStaticRouteProvEntry 12 } -- Vr/<string> Ip Static Route/<Ip Address>,<Ip Address>,<Decimal> -- NextHop/<Ip Address> -- This component provides the destination Ip address of the NextHop -- (some times referred to as the Gateway). -- -- For a RouteEntry to be valid, there should be at least one NextHop -- provisioned. Up to three NextHops can be provisioned for each instance -- of a RouteEntry. -- -- Each provisioned NextHop address should belong to a valid subnet. -- A valid subnet for this IP entity can be provisioned as a logicalIf Entry -- under an IpPort. vrIpStaticRouteNh OBJECT IDENTIFIER ::= { vrIpStaticRoute 2 } vrIpStaticRouteNhRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpStaticRouteNhRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpStaticRouteNh components." ::= { vrIpStaticRouteNh 1 } vrIpStaticRouteNhRowStatusEntry OBJECT-TYPE SYNTAX VrIpStaticRouteNhRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpStaticRouteNh component." INDEX { vrIndex, vrIpIndex, vrIpStaticIndex, vrIpStaticRouteDestAddressIndex, vrIpStaticRouteDestMaskIndex, vrIpStaticRouteTypeOfServiceIndex, vrIpStaticRouteNhIndex } ::= { vrIpStaticRouteNhRowStatusTable 1 } VrIpStaticRouteNhRowStatusEntry ::= SEQUENCE { vrIpStaticRouteNhRowStatus RowStatus, vrIpStaticRouteNhComponentName DisplayString, vrIpStaticRouteNhStorageType StorageType, vrIpStaticRouteNhIndex IpAddress } vrIpStaticRouteNhRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpStaticRouteNh components. These components can be added and deleted." ::= { vrIpStaticRouteNhRowStatusEntry 1 } vrIpStaticRouteNhComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpStaticRouteNhRowStatusEntry 2 } vrIpStaticRouteNhStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpStaticRouteNh tables." ::= { vrIpStaticRouteNhRowStatusEntry 4 } vrIpStaticRouteNhIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpStaticRouteNh tables." ::= { vrIpStaticRouteNhRowStatusEntry 10 } vrIpStaticRouteNhProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpStaticRouteNhProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains a provisionable set of attributes for the Static RouteEntry NextHop component." ::= { vrIpStaticRouteNh 10 } vrIpStaticRouteNhProvEntry OBJECT-TYPE SYNTAX VrIpStaticRouteNhProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpStaticRouteNhProvTable." INDEX { vrIndex, vrIpIndex, vrIpStaticIndex, vrIpStaticRouteDestAddressIndex, vrIpStaticRouteDestMaskIndex, vrIpStaticRouteTypeOfServiceIndex, vrIpStaticRouteNhIndex } ::= { vrIpStaticRouteNhProvTable 1 } VrIpStaticRouteNhProvEntry ::= SEQUENCE { vrIpStaticRouteNhMetric INTEGER } vrIpStaticRouteNhMetric OBJECT-TYPE SYNTAX INTEGER (-1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the primary routing metric for this NextHop." DEFVAL { 1 } ::= { vrIpStaticRouteNhProvEntry 1 } -- Vr/<string> Ip Static DiscardRouteEntry/<Ip Address>,<Ip Address> -- This table identifies invalid martian networks. Forwarding of packets to -- the network address indicated by this entry will be discarded. vrIpStaticDiscard OBJECT IDENTIFIER ::= { vrIpStatic 3 } vrIpStaticDiscardRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpStaticDiscardRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpStaticDiscard components." ::= { vrIpStaticDiscard 1 } vrIpStaticDiscardRowStatusEntry OBJECT-TYPE SYNTAX VrIpStaticDiscardRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpStaticDiscard component." INDEX { vrIndex, vrIpIndex, vrIpStaticIndex, vrIpStaticDiscardDestAddressIndex, vrIpStaticDiscardDestMaskIndex } ::= { vrIpStaticDiscardRowStatusTable 1 } VrIpStaticDiscardRowStatusEntry ::= SEQUENCE { vrIpStaticDiscardRowStatus RowStatus, vrIpStaticDiscardComponentName DisplayString, vrIpStaticDiscardStorageType StorageType, vrIpStaticDiscardDestAddressIndex IpAddress, vrIpStaticDiscardDestMaskIndex IpAddress } vrIpStaticDiscardRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpStaticDiscard components. These components can be added and deleted." ::= { vrIpStaticDiscardRowStatusEntry 1 } vrIpStaticDiscardComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpStaticDiscardRowStatusEntry 2 } vrIpStaticDiscardStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpStaticDiscard tables." ::= { vrIpStaticDiscardRowStatusEntry 4 } vrIpStaticDiscardDestAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpStaticDiscard tables." ::= { vrIpStaticDiscardRowStatusEntry 10 } vrIpStaticDiscardDestMaskIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpStaticDiscard tables." ::= { vrIpStaticDiscardRowStatusEntry 11 } -- Vr/<string Ip NetSentry -- NetSentry defines a set of filters which are compiled by the -- NetSentry process to be applied to all IP packets. IP packets can -- be filtered based on IP address and netmask combinations. vrIpNs OBJECT IDENTIFIER ::= { vrIp 10 } vrIpNsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpNsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpNs components." ::= { vrIpNs 1 } vrIpNsRowStatusEntry OBJECT-TYPE SYNTAX VrIpNsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpNs component." INDEX { vrIndex, vrIpIndex, vrIpNsIndex } ::= { vrIpNsRowStatusTable 1 } VrIpNsRowStatusEntry ::= SEQUENCE { vrIpNsRowStatus RowStatus, vrIpNsComponentName DisplayString, vrIpNsStorageType StorageType, vrIpNsIndex NonReplicated } vrIpNsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpNs components. These components can be added and deleted." ::= { vrIpNsRowStatusEntry 1 } vrIpNsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpNsRowStatusEntry 2 } vrIpNsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpNs tables." ::= { vrIpNsRowStatusEntry 4 } vrIpNsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpNs tables." ::= { vrIpNsRowStatusEntry 10 } vrIpNsProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpNsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains provisionable attributes for the NetSentry component." ::= { vrIpNs 10 } vrIpNsProvEntry OBJECT-TYPE SYNTAX VrIpNsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpNsProvTable." INDEX { vrIndex, vrIpIndex, vrIpNsIndex } ::= { vrIpNsProvTable 1 } VrIpNsProvEntry ::= SEQUENCE { vrIpNsFirstFilter AsciiString, vrIpNsLocalInFilter AsciiString, vrIpNsLocalOutFilter AsciiString, vrIpNsLastFilter AsciiString } vrIpNsFirstFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The firstFilter is the first filter point which affects all IP packets before they have been examined in any way for their origin and destination. The most common use of a firstFilter point is to collect statistis for all packets arriving at the route on any interface, before any subsequent filter processing changes their direction or disposition." ::= { vrIpNsProvEntry 1 } vrIpNsLocalInFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The localInFilter is the second filter point which uses by network administrator to perform a common action on all IP packets that physically arrive over a specific logical interface, regardless of the packet's stated source or destination. Typical uses for a localInFilter include verifying that known Ethernet media source addresses match known IP addresses, or confirming that the IP packet source addresses of received IP packet fall within a narrow range." ::= { vrIpNsProvEntry 2 } vrIpNsLocalOutFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The localOutFilter is the third filter point which applies to any IP packet that will be transmitted from the router to the medium associated with the interface, regardless of its source, destination, or what type of decision was made to cause the datagram to be transmitted on this interface. localOutFilter generally used to ensure that certain paterns of traffic do not enter the network or reach a second IP router on that network. For example, localOutFilter can be used as the exclusion of all IP packets above a certain security classification, or collecting statistics on the amount of IP fragments performed on an outgoing interface." ::= { vrIpNsProvEntry 3 } vrIpNsLastFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "lastFilter is the fourth and last filter point to be excecuted after all other routing and filtering decisions have been made on the IP packet, and transmission of the information is imminent. lastFilter is generally used to collect statistics on traffic after all previous control and routing decisions have been made." ::= { vrIpNsProvEntry 4 } -- Vr/<string> Ip NetSentry ApplyEntry/<Decimal> -- This component contains a list of NetSentry filters that can be applied to -- IP packets and information pertaining to each application of such -- NetSentry filters. vrIpNsApply OBJECT IDENTIFIER ::= { vrIpNs 2 } vrIpNsApplyRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpNsApplyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpNsApply components." ::= { vrIpNsApply 1 } vrIpNsApplyRowStatusEntry OBJECT-TYPE SYNTAX VrIpNsApplyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpNsApply component." INDEX { vrIndex, vrIpIndex, vrIpNsIndex, vrIpNsApplyIndex } ::= { vrIpNsApplyRowStatusTable 1 } VrIpNsApplyRowStatusEntry ::= SEQUENCE { vrIpNsApplyRowStatus RowStatus, vrIpNsApplyComponentName DisplayString, vrIpNsApplyStorageType StorageType, vrIpNsApplyIndex Integer32 } vrIpNsApplyRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpNsApply components. These components can be added and deleted." ::= { vrIpNsApplyRowStatusEntry 1 } vrIpNsApplyComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpNsApplyRowStatusEntry 2 } vrIpNsApplyStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpNsApply tables." ::= { vrIpNsApplyRowStatusEntry 4 } vrIpNsApplyIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpNsApply tables." ::= { vrIpNsApplyRowStatusEntry 10 } vrIpNsApplyProvisionedTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpNsApplyProvisionedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The instance of provisioned information relating to a filter application to IP packet." ::= { vrIpNsApply 10 } vrIpNsApplyProvisionedEntry OBJECT-TYPE SYNTAX VrIpNsApplyProvisionedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpNsApplyProvisionedTable." INDEX { vrIndex, vrIpIndex, vrIpNsIndex, vrIpNsApplyIndex } ::= { vrIpNsApplyProvisionedTable 1 } VrIpNsApplyProvisionedEntry ::= SEQUENCE { vrIpNsApplyFilter AsciiString, vrIpNsApplyIpAddress1 IpAddress, vrIpNsApplyIpMask1 IpAddress, vrIpNsApplyIpAddress2 IpAddress, vrIpNsApplyIpMask2 IpAddress, vrIpNsApplyDirection INTEGER } vrIpNsApplyFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the filter to be applied to packet matching the conditions in this entry." ::= { vrIpNsApplyProvisionedEntry 1 } vrIpNsApplyIpAddress1 OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The first IP address used to compare." ::= { vrIpNsApplyProvisionedEntry 2 } vrIpNsApplyIpMask1 OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The first netmask associated with ipAddress1 used to compare." ::= { vrIpNsApplyProvisionedEntry 3 } vrIpNsApplyIpAddress2 OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This second IP address used to compare." ::= { vrIpNsApplyProvisionedEntry 4 } vrIpNsApplyIpMask2 OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This second netmask associated with ipAddress2 used to compare." ::= { vrIpNsApplyProvisionedEntry 5 } vrIpNsApplyDirection OBJECT-TYPE SYNTAX INTEGER { to(1), from(2), tofrom(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the direction a packet must be moving between the first and second apply list entries in order for the entries to match. First 'to' second, first 'from' second, or first 'tofrom' second (either direction)." DEFVAL { tofrom } ::= { vrIpNsApplyProvisionedEntry 6 } -- Vr/<string> Ip Arp -- The component specifies the Address Resolution Protocol. vrIpArp OBJECT IDENTIFIER ::= { vrIp 11 } vrIpArpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpArpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpArp components." ::= { vrIpArp 1 } vrIpArpRowStatusEntry OBJECT-TYPE SYNTAX VrIpArpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpArp component." INDEX { vrIndex, vrIpIndex, vrIpArpIndex } ::= { vrIpArpRowStatusTable 1 } VrIpArpRowStatusEntry ::= SEQUENCE { vrIpArpRowStatus RowStatus, vrIpArpComponentName DisplayString, vrIpArpStorageType StorageType, vrIpArpIndex NonReplicated } vrIpArpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpArp components. These components cannot be added nor deleted." ::= { vrIpArpRowStatusEntry 1 } vrIpArpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpArpRowStatusEntry 2 } vrIpArpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpArp tables." ::= { vrIpArpRowStatusEntry 4 } vrIpArpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpArp tables." ::= { vrIpArpRowStatusEntry 10 } vrIpArpProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpArpProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ARP refresh feature allows the router to periodically verify ARP table entries. Whenever the router updates an ARP entry, or creates a new entry, a timeout value is assigned to the entry. When the timeout for an entry expires, the router will send a unicast ARP request to the currently-known physical address. If an ARP response comes back, the entry will be assigned a new timeout. If, however, the host has gone away or been assigned a new physical address, the host will not respond to the unicast ARP, and the entry will be removed from the ARP table. The new physical address will be discovered through the normal ARP mechanism when the next communication is attempted to the host." ::= { vrIpArp 10 } vrIpArpProvEntry OBJECT-TYPE SYNTAX VrIpArpProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpArpProvTable." INDEX { vrIndex, vrIpIndex, vrIpArpIndex } ::= { vrIpArpProvTable 1 } VrIpArpProvEntry ::= SEQUENCE { vrIpArpAutoRefresh INTEGER, vrIpArpAutoRefreshTimeout Unsigned32 } vrIpArpAutoRefresh OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to enable or disable the ARP refresh feature." DEFVAL { disabled } ::= { vrIpArpProvEntry 1 } vrIpArpAutoRefreshTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..1440) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the timeout value, in minutes, which is assigned to updated ARP entries, or newly created ARP entries. The range for the timeout is 1 minute to 1440 minutes (24 hours)." DEFVAL { 5 } ::= { vrIpArpProvEntry 2 } -- Vr/<string> Ip Arp HostEntry/<Ip Address> -- This component defines a static host entry in the Arp table. -- Each static host entry is assigned Class of Service (CoS) 0 when the -- associated media type is one where CoS can be specifed on a per virtual -- circuit basis (eg. frameRelayDte or atmMpe). For other media types, the -- CoS value notApplicable (not VC dependant) is assigned. vrIpArpHost OBJECT IDENTIFIER ::= { vrIpArp 2 } vrIpArpHostRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpArpHostRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpArpHost components." ::= { vrIpArpHost 1 } vrIpArpHostRowStatusEntry OBJECT-TYPE SYNTAX VrIpArpHostRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpArpHost component." INDEX { vrIndex, vrIpIndex, vrIpArpIndex, vrIpArpHostHostAddressIndex } ::= { vrIpArpHostRowStatusTable 1 } VrIpArpHostRowStatusEntry ::= SEQUENCE { vrIpArpHostRowStatus RowStatus, vrIpArpHostComponentName DisplayString, vrIpArpHostStorageType StorageType, vrIpArpHostHostAddressIndex IpAddress } vrIpArpHostRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpArpHost components. These components can be added and deleted." ::= { vrIpArpHostRowStatusEntry 1 } vrIpArpHostComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpArpHostRowStatusEntry 2 } vrIpArpHostStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpArpHost tables." ::= { vrIpArpHostRowStatusEntry 4 } vrIpArpHostHostAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpArpHost tables." ::= { vrIpArpHostRowStatusEntry 10 } vrIpArpHostProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpArpHostProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes of the HostEntry component." ::= { vrIpArpHost 10 } vrIpArpHostProvEntry OBJECT-TYPE SYNTAX VrIpArpHostProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpArpHostProvTable." INDEX { vrIndex, vrIpIndex, vrIpArpIndex, vrIpArpHostHostAddressIndex } ::= { vrIpArpHostProvTable 1 } VrIpArpHostProvEntry ::= SEQUENCE { vrIpArpHostPhysAddress PhysAddress, vrIpArpHostMaxTxUnit Unsigned32, vrIpArpHostPermanentVirtualCircuitNumber Unsigned32, vrIpArpHostEncap INTEGER } vrIpArpHostPhysAddress OBJECT-TYPE SYNTAX PhysAddress (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the physical address of the host being defined. The value for this attribute should only be specified for media types supporting physical addresses (eg. ethernet, fddi, tokenRing etc.)" DEFVAL { '000000000000'H } ::= { vrIpArpHostProvEntry 1 } vrIpArpHostMaxTxUnit OBJECT-TYPE SYNTAX Unsigned32 (0..0 | 576..18944) ACCESS read-write STATUS mandatory DESCRIPTION "Specify the maximum transmit unit (MTU) size that can be accepted by the host. If this value is not specified, the value for the media interface is used. The specified MTU must be less than or equal to the interface's MTU size." DEFVAL { 0 } ::= { vrIpArpHostProvEntry 2 } vrIpArpHostPermanentVirtualCircuitNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "Specify a permanent virtual circuit number to the remote host on X.25 or frame relay media. The value for this attribute can only be specified for X.25 or frame relay media." DEFVAL { 0 } ::= { vrIpArpHostProvEntry 3 } vrIpArpHostEncap OBJECT-TYPE SYNTAX INTEGER { ieee8023(1), ethernet(2), auto(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Specify the encapsulation type for the host. The value for this attribute should only be specified for the hosts on the ethernet media. If a value of auto is specified, the application based on the media will determine the proper applicable encapsulation type." DEFVAL { auto } ::= { vrIpArpHostProvEntry 4 } vrIpArpHostOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpArpHostOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the HostEntry component." ::= { vrIpArpHost 11 } vrIpArpHostOperEntry OBJECT-TYPE SYNTAX VrIpArpHostOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpArpHostOperTable." INDEX { vrIndex, vrIpIndex, vrIpArpIndex, vrIpArpHostHostAddressIndex } ::= { vrIpArpHostOperTable 1 } VrIpArpHostOperEntry ::= SEQUENCE { vrIpArpHostOperMaxTxUnit Unsigned32, vrIpArpHostOperEncap INTEGER } vrIpArpHostOperMaxTxUnit OBJECT-TYPE SYNTAX Unsigned32 (0..0 | 576..18944) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the operational value of the maximum transmission unit." ::= { vrIpArpHostOperEntry 4 } vrIpArpHostOperEncap OBJECT-TYPE SYNTAX INTEGER { ieee8023(1), ethernet(2), notApplicable(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the operational encapsulation type. if the value of the attribute encap is set to auto, then the application will determine the encapsulation type based on the media being used and assigns the appropriate value." ::= { vrIpArpHostOperEntry 5 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/<string> Ip Arp DynHostEntry/<Ip Address> -- This component is a table that contains all Arp host entries (both static -- and dynamic)..Each IP ARP entry in the table is uniquely defined by its -- IP address and Class of Service (CoS) index. -- -- When the associated media type is one where the CoS can be specifed -- on a per virtual circuit basis (eg. frameRelayDte or atmMpe) the CoS -- index of the arp entry may be 0, 1, 2, or 3; otherwise, the CoS index is -- na (not VC dependent). -- -- An IP packet that has been assigned a particular CoS will be forwarded -- using the arp entry where the IP address matches the packet's -- destination IP address and where the CoS index matches the packet's -- CoS. When there are arp entries that match the packet's destination IP -- address, but not the packet's CoS, the packet will be forwarded using the -- arp entry that has the next lowest CoS index; failing this, the packet will -- be forwarded using the arp entry that has the next highest CoS index. vrIpArpDynHost OBJECT IDENTIFIER ::= { vrIpArp 3 } vrIpArpDynHostRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpArpDynHostRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpArpDynHost components." ::= { vrIpArpDynHost 1 } vrIpArpDynHostRowStatusEntry OBJECT-TYPE SYNTAX VrIpArpDynHostRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpArpDynHost component." INDEX { vrIndex, vrIpIndex, vrIpArpIndex, vrIpArpDynHostHostAddressIndex, vrIpArpDynHostCosIndex } ::= { vrIpArpDynHostRowStatusTable 1 } VrIpArpDynHostRowStatusEntry ::= SEQUENCE { vrIpArpDynHostRowStatus RowStatus, vrIpArpDynHostComponentName DisplayString, vrIpArpDynHostStorageType StorageType, vrIpArpDynHostHostAddressIndex IpAddress, vrIpArpDynHostCosIndex INTEGER } vrIpArpDynHostRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpArpDynHost components. These components cannot be added nor deleted." ::= { vrIpArpDynHostRowStatusEntry 1 } vrIpArpDynHostComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpArpDynHostRowStatusEntry 2 } vrIpArpDynHostStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpArpDynHost tables." ::= { vrIpArpDynHostRowStatusEntry 4 } vrIpArpDynHostHostAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpArpDynHost tables." ::= { vrIpArpDynHostRowStatusEntry 10 } vrIpArpDynHostCosIndex OBJECT-TYPE SYNTAX INTEGER { n0(0), n1(1), n2(2), n3(3), notApplicable(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpArpDynHost tables." ::= { vrIpArpDynHostRowStatusEntry 11 } vrIpArpDynHostOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpArpDynHostOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of the DynHostEntry component." ::= { vrIpArpDynHost 10 } vrIpArpDynHostOperEntry OBJECT-TYPE SYNTAX VrIpArpDynHostOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpArpDynHostOperTable." INDEX { vrIndex, vrIpIndex, vrIpArpIndex, vrIpArpDynHostHostAddressIndex, vrIpArpDynHostCosIndex } ::= { vrIpArpDynHostOperTable 1 } VrIpArpDynHostOperEntry ::= SEQUENCE { vrIpArpDynHostPhysAddress PhysAddress, vrIpArpDynHostMaxTxUnit Unsigned32, vrIpArpDynHostEncapsulationType INTEGER, vrIpArpDynHostPermanentVirtualCircuitNumber Unsigned32, vrIpArpDynHostIfIndex InterfaceIndex, vrIpArpDynHostType INTEGER, vrIpArpDynHostNcPhysAddress PhysAddress } vrIpArpDynHostPhysAddress OBJECT-TYPE SYNTAX PhysAddress (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the physical address of the host in canonical form." ::= { vrIpArpDynHostOperEntry 1 } vrIpArpDynHostMaxTxUnit OBJECT-TYPE SYNTAX Unsigned32 (0..0 | 576..18944) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum MTU size that can be accepted by the host." DEFVAL { 0 } ::= { vrIpArpDynHostOperEntry 3 } vrIpArpDynHostEncapsulationType OBJECT-TYPE SYNTAX INTEGER { ieee8023(1), ethernet(2), notApplicable(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the encapsulation type of the host." ::= { vrIpArpDynHostOperEntry 4 } vrIpArpDynHostPermanentVirtualCircuitNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4095) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the permanent virtual circuit number to the remote host." ::= { vrIpArpDynHostOperEntry 5 } vrIpArpDynHostIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the ifIndex of the protocol port that is associated with this entry." DEFVAL { 1 } ::= { vrIpArpDynHostOperEntry 6 } vrIpArpDynHostType OBJECT-TYPE SYNTAX INTEGER { pending(1), invalid(2), dynamic(3), static(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates how this entry was learned." ::= { vrIpArpDynHostOperEntry 7 } vrIpArpDynHostNcPhysAddress OBJECT-TYPE SYNTAX PhysAddress (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the physical address of the host in non-canonical form. This attribute is not displayed for hosts on non-LAN media." ::= { vrIpArpDynHostOperEntry 8 } -- Vr/<string> Ip Icmp -- The Icmp component controls all ICMP related attributes available to -- this router. vrIpIcmp OBJECT IDENTIFIER ::= { vrIp 12 } vrIpIcmpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpIcmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpIcmp components." ::= { vrIpIcmp 1 } vrIpIcmpRowStatusEntry OBJECT-TYPE SYNTAX VrIpIcmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpIcmp component." INDEX { vrIndex, vrIpIndex, vrIpIcmpIndex } ::= { vrIpIcmpRowStatusTable 1 } VrIpIcmpRowStatusEntry ::= SEQUENCE { vrIpIcmpRowStatus RowStatus, vrIpIcmpComponentName DisplayString, vrIpIcmpStorageType StorageType, vrIpIcmpIndex NonReplicated } vrIpIcmpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpIcmp components. These components cannot be added nor deleted." ::= { vrIpIcmpRowStatusEntry 1 } vrIpIcmpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpIcmpRowStatusEntry 2 } vrIpIcmpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpIcmp tables." ::= { vrIpIcmpRowStatusEntry 4 } vrIpIcmpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpIcmp tables." ::= { vrIpIcmpRowStatusEntry 10 } vrIpIcmpProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpIcmpProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group holds provisioned attributes for ICMP." ::= { vrIpIcmp 10 } vrIpIcmpProvEntry OBJECT-TYPE SYNTAX VrIpIcmpProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpIcmpProvTable." INDEX { vrIndex, vrIpIndex, vrIpIcmpIndex } ::= { vrIpIcmpProvTable 1 } VrIpIcmpProvEntry ::= SEQUENCE { vrIpIcmpSendRedirect INTEGER, vrIpIcmpSendHostUnreachable INTEGER } vrIpIcmpSendRedirect OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute specifies whether an ICMP redirect will be sent. If enabled, the router may send an ICMP redirect if a an Ip packet is being routed out the same logicalInterface as it was received on. The router will only send host ICMP redirects. If disabled, the router will never send a ICMP redirect." DEFVAL { enabled } ::= { vrIpIcmpProvEntry 1 } vrIpIcmpSendHostUnreachable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute specifies whether host unreachable will be sent or not." DEFVAL { disabled } ::= { vrIpIcmpProvEntry 2 } vrIpIcmpStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpIcmpStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group holds statistics for ICMP." ::= { vrIpIcmp 11 } vrIpIcmpStatsEntry OBJECT-TYPE SYNTAX VrIpIcmpStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpIcmpStatsTable." INDEX { vrIndex, vrIpIndex, vrIpIcmpIndex } ::= { vrIpIcmpStatsTable 1 } VrIpIcmpStatsEntry ::= SEQUENCE { vrIpIcmpInMsgs Counter32, vrIpIcmpInErrors Counter32, vrIpIcmpInDestUnreachs Counter32, vrIpIcmpInTimeExcds Counter32, vrIpIcmpInParmProbs Counter32, vrIpIcmpInSrcQuenchs Counter32, vrIpIcmpInRedirects Counter32, vrIpIcmpInEchos Counter32, vrIpIcmpInEchoReps Counter32, vrIpIcmpInTimestamps Counter32, vrIpIcmpInTimestampReps Counter32, vrIpIcmpInAddrMasks Counter32, vrIpIcmpInAddrMaskReps Counter32, vrIpIcmpOutMsgs Counter32, vrIpIcmpOutErrors Counter32, vrIpIcmpOutDestUnreachs Counter32, vrIpIcmpOutTimeExcds Counter32, vrIpIcmpOutParmProbs Counter32, vrIpIcmpOutSrcQuenchs Counter32, vrIpIcmpOutRedirects Counter32, vrIpIcmpOutEchos Counter32, vrIpIcmpOutEchoReps Counter32, vrIpIcmpOutTimestamps Counter32, vrIpIcmpOutTimestampReps Counter32, vrIpIcmpOutAddrMasks Counter32, vrIpIcmpOutAddrMaskReps Counter32, vrIpIcmpInRtrAdvs Counter32, vrIpIcmpInRtrSolicits Counter32, vrIpIcmpOutRtrAdvs Counter32, vrIpIcmpOutRtrSolicits Counter32 } vrIpIcmpInMsgs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP messages received by this gateway. This number includes inErrors. inMsgs wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 1 } vrIpIcmpInErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP messages received by this gateway but determined as having ICMP specific errors such as bad ICMP checksums or bad length. inErrors wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 2 } vrIpIcmpInDestUnreachs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP destination unreachable messages received by this gateway. inDestUnreachs wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 3 } vrIpIcmpInTimeExcds OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP time exceeded messages received by this gateway. inTimeExcds wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 4 } vrIpIcmpInParmProbs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP parameter problem messages received by this gateway. inParmProbs wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 5 } vrIpIcmpInSrcQuenchs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP source quench messages received by this gateway. inSrcQuenchs wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 6 } vrIpIcmpInRedirects OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP redirect messages received by this gateway. inRedirects wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 7 } vrIpIcmpInEchos OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP echo request messages received by this gateway. inEchos wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 8 } vrIpIcmpInEchoReps OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP echo reply messages received by this gateway. inEchoReps wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 9 } vrIpIcmpInTimestamps OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP timestamp request messages received by this gateway. inTimeStamps wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 10 } vrIpIcmpInTimestampReps OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP timestamp reply messages received by this gateway. inTimeStampReps wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 11 } vrIpIcmpInAddrMasks OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP address mask request messages received by this gateway. inAddrMasks wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 12 } vrIpIcmpInAddrMaskReps OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP address mask reply messages received by this gateway. inAddrMaskReps wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 13 } vrIpIcmpOutMsgs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP messages which this gateway attempted to send. This number includes outErrors. outMsgs wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 14 } vrIpIcmpOutErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP messages which this gateway did not send due to problems discovered within ICMP such as a lack of buffers. outErrors does not included errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. outErrors wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 15 } vrIpIcmpOutDestUnreachs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP destination unreachable messages sent by this gateway. outDestUnreachs wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 16 } vrIpIcmpOutTimeExcds OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP time exceeded messages sent by this gateway. outTimeExcds wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 17 } vrIpIcmpOutParmProbs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP parameter problem messages sent by this gateway. outParmProbs wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 18 } vrIpIcmpOutSrcQuenchs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP source quench messages sent by this gateway. ourSrcQuench wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 19 } vrIpIcmpOutRedirects OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP redirect messages sent by this gateway. outRedirects wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 20 } vrIpIcmpOutEchos OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP echo request messages sent by this gateway. outEchos wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 21 } vrIpIcmpOutEchoReps OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP echo reply messages sent by this gateway. outEchoReps wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 22 } vrIpIcmpOutTimestamps OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP timestamp request messages sent by this gateway. outTimeStamps wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 23 } vrIpIcmpOutTimestampReps OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP timestamp reply messages sent by this gateway. outTimeStampReps wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 24 } vrIpIcmpOutAddrMasks OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP address mask request messages sent by this gateway. outAddrMasks wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 25 } vrIpIcmpOutAddrMaskReps OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP address mask reply message sent by this gateway. outAddrMaskReps wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 26 } vrIpIcmpInRtrAdvs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP router advertisement messages received by this gateway. inRtrAdvs wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 27 } vrIpIcmpInRtrSolicits OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP router solicitation messages received by this gateway. inRtrSolicits wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 28 } vrIpIcmpOutRtrAdvs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP router advertisement messages sent by this gateway. outRtrAdvs wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 29 } vrIpIcmpOutRtrSolicits OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of ICMP router solicitation messages sent by this gateway. outRtrSolicits wraps to zero if it reaches its maximum defined value." ::= { vrIpIcmpStatsEntry 30 } -- Vr/<string> Ip RelayBC -- The InwRelayBroadcast component controls the dissemination of IP -- broadcast packets received as Link-Layer broadcast. vrIpRelayBC OBJECT IDENTIFIER ::= { vrIp 13 } vrIpRelayBCRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRelayBCRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpRelayBC components." ::= { vrIpRelayBC 1 } vrIpRelayBCRowStatusEntry OBJECT-TYPE SYNTAX VrIpRelayBCRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpRelayBC component." INDEX { vrIndex, vrIpIndex, vrIpRelayBCIndex } ::= { vrIpRelayBCRowStatusTable 1 } VrIpRelayBCRowStatusEntry ::= SEQUENCE { vrIpRelayBCRowStatus RowStatus, vrIpRelayBCComponentName DisplayString, vrIpRelayBCStorageType StorageType, vrIpRelayBCIndex NonReplicated } vrIpRelayBCRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpRelayBC components. These components cannot be added nor deleted." ::= { vrIpRelayBCRowStatusEntry 1 } vrIpRelayBCComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpRelayBCRowStatusEntry 2 } vrIpRelayBCStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpRelayBC tables." ::= { vrIpRelayBCRowStatusEntry 4 } vrIpRelayBCIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpRelayBC tables." ::= { vrIpRelayBCRowStatusEntry 10 } vrIpRelayBCProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRelayBCProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains global configuration attributes for the Relay Broadcast component." ::= { vrIpRelayBC 10 } vrIpRelayBCProvEntry OBJECT-TYPE SYNTAX VrIpRelayBCProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpRelayBCProvTable." INDEX { vrIndex, vrIpIndex, vrIpRelayBCIndex } ::= { vrIpRelayBCProvTable 1 } VrIpRelayBCProvEntry ::= SEQUENCE { vrIpRelayBCRelayStatus INTEGER, vrIpRelayBCRelayNdStatus INTEGER } vrIpRelayBCRelayStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether or not IP will forward IP broadcast packets that were received as Link-Layer broadcasts." DEFVAL { disabled } ::= { vrIpRelayBCProvEntry 1 } vrIpRelayBCRelayNdStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether or not IP will forward broadcast packets whose protocol is Sun ND." DEFVAL { disabled } ::= { vrIpRelayBCProvEntry 2 } vrIpRelayBCOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRelayBCOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains RelayBroadcast component statistics." ::= { vrIpRelayBC 11 } vrIpRelayBCOperEntry OBJECT-TYPE SYNTAX VrIpRelayBCOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpRelayBCOperTable." INDEX { vrIndex, vrIpIndex, vrIpRelayBCIndex } ::= { vrIpRelayBCOperTable 1 } VrIpRelayBCOperEntry ::= SEQUENCE { vrIpRelayBCRelayNdCount Counter32 } vrIpRelayBCRelayNdCount OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of Sun ND packets received by this router which were forwarded. relayNdCount wraps to zero if reached its maximum." ::= { vrIpRelayBCOperEntry 1 } -- Vr/<string> Ip RelayBC PortEntry/<Decimal> -- This component is a table of destination UDP port numbers. In order for -- a packet to be forwarded by Relay Broadcast, the packet's destination -- UDP port number must be listed in this table. vrIpRelayBCPort OBJECT IDENTIFIER ::= { vrIpRelayBC 2 } vrIpRelayBCPortRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRelayBCPortRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpRelayBCPort components." ::= { vrIpRelayBCPort 1 } vrIpRelayBCPortRowStatusEntry OBJECT-TYPE SYNTAX VrIpRelayBCPortRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpRelayBCPort component." INDEX { vrIndex, vrIpIndex, vrIpRelayBCIndex, vrIpRelayBCPortPortNumIndex } ::= { vrIpRelayBCPortRowStatusTable 1 } VrIpRelayBCPortRowStatusEntry ::= SEQUENCE { vrIpRelayBCPortRowStatus RowStatus, vrIpRelayBCPortComponentName DisplayString, vrIpRelayBCPortStorageType StorageType, vrIpRelayBCPortPortNumIndex Integer32 } vrIpRelayBCPortRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpRelayBCPort components. These components can be added and deleted." ::= { vrIpRelayBCPortRowStatusEntry 1 } vrIpRelayBCPortComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpRelayBCPortRowStatusEntry 2 } vrIpRelayBCPortStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpRelayBCPort tables." ::= { vrIpRelayBCPortRowStatusEntry 4 } vrIpRelayBCPortPortNumIndex OBJECT-TYPE SYNTAX Integer32 (0..268435455) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpRelayBCPort tables." ::= { vrIpRelayBCPortRowStatusEntry 10 } vrIpRelayBCPortOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpRelayBCPortOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains statistics related to InwPortEntry." ::= { vrIpRelayBCPort 10 } vrIpRelayBCPortOperEntry OBJECT-TYPE SYNTAX VrIpRelayBCPortOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpRelayBCPortOperTable." INDEX { vrIndex, vrIpIndex, vrIpRelayBCIndex, vrIpRelayBCPortPortNumIndex } ::= { vrIpRelayBCPortOperTable 1 } VrIpRelayBCPortOperEntry ::= SEQUENCE { vrIpRelayBCPortRelayBcUdpCount Counter32 } vrIpRelayBCPortRelayBcUdpCount OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of forwarded packets with this destination UDP port number. relayBcUdpCount wraps to zero if reached its maximum." ::= { vrIpRelayBCPortOperEntry 1 } -- Vr/<string> Ip Udp -- Udp component controls all UDP related attributes supported by this -- router. vrIpUdp OBJECT IDENTIFIER ::= { vrIp 14 } vrIpUdpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpUdpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpUdp components." ::= { vrIpUdp 1 } vrIpUdpRowStatusEntry OBJECT-TYPE SYNTAX VrIpUdpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpUdp component." INDEX { vrIndex, vrIpIndex, vrIpUdpIndex } ::= { vrIpUdpRowStatusTable 1 } VrIpUdpRowStatusEntry ::= SEQUENCE { vrIpUdpRowStatus RowStatus, vrIpUdpComponentName DisplayString, vrIpUdpStorageType StorageType, vrIpUdpIndex NonReplicated } vrIpUdpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpUdp components. These components cannot be added nor deleted." ::= { vrIpUdpRowStatusEntry 1 } vrIpUdpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpUdpRowStatusEntry 2 } vrIpUdpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpUdp tables." ::= { vrIpUdpRowStatusEntry 4 } vrIpUdpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpUdp tables." ::= { vrIpUdpRowStatusEntry 10 } vrIpUdpStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpUdpStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group holds statictics for UDP." ::= { vrIpUdp 10 } vrIpUdpStatsEntry OBJECT-TYPE SYNTAX VrIpUdpStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpUdpStatsTable." INDEX { vrIndex, vrIpIndex, vrIpUdpIndex } ::= { vrIpUdpStatsTable 1 } VrIpUdpStatsEntry ::= SEQUENCE { vrIpUdpInDatagrams Counter32, vrIpUdpNoPorts Counter32, vrIpUdpInErrors Counter32, vrIpUdpOutDatagrams Counter32 } vrIpUdpInDatagrams OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of UDP datagrams delivered to UDP users. inDatagrams wraps to zero if reaches its maximum defined value." ::= { vrIpUdpStatsEntry 1 } vrIpUdpNoPorts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of UDP datagrams received for which there was no application at the destination port. noPorts wraps to zero if reaches its maximum defined value." ::= { vrIpUdpStatsEntry 2 } vrIpUdpInErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. inErrors wraps to zero if reaches its maximum defined value." ::= { vrIpUdpStatsEntry 3 } vrIpUdpOutDatagrams OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of UDP datagrams sent from this gateway. outDatagrams wraps to zero if reaches its maximum defined value." ::= { vrIpUdpStatsEntry 4 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- The table contains UDP listener information. vrIpUdpListenEntry OBJECT IDENTIFIER ::= { vrIpUdp 2 } vrIpUdpListenEntryRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpUdpListenEntryRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpUdpListenEntry components." ::= { vrIpUdpListenEntry 1 } vrIpUdpListenEntryRowStatusEntry OBJECT-TYPE SYNTAX VrIpUdpListenEntryRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpUdpListenEntry component." INDEX { vrIndex, vrIpIndex, vrIpUdpIndex, vrIpUdpListenEntryLocalAddressIndex, vrIpUdpListenEntryLocalPortIndex } ::= { vrIpUdpListenEntryRowStatusTable 1 } VrIpUdpListenEntryRowStatusEntry ::= SEQUENCE { vrIpUdpListenEntryRowStatus RowStatus, vrIpUdpListenEntryComponentName DisplayString, vrIpUdpListenEntryStorageType StorageType, vrIpUdpListenEntryLocalAddressIndex IpAddress, vrIpUdpListenEntryLocalPortIndex Integer32 } vrIpUdpListenEntryRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpUdpListenEntry components. These components cannot be added nor deleted." ::= { vrIpUdpListenEntryRowStatusEntry 1 } vrIpUdpListenEntryComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpUdpListenEntryRowStatusEntry 2 } vrIpUdpListenEntryStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpUdpListenEntry tables." ::= { vrIpUdpListenEntryRowStatusEntry 4 } vrIpUdpListenEntryLocalAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpUdpListenEntry tables." ::= { vrIpUdpListenEntryRowStatusEntry 10 } vrIpUdpListenEntryLocalPortIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpUdpListenEntry tables." ::= { vrIpUdpListenEntryRowStatusEntry 11 } -- The Tcp component contains all attributes related to TCP. vrIpTcp OBJECT IDENTIFIER ::= { vrIp 15 } vrIpTcpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpTcpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpTcp components." ::= { vrIpTcp 1 } vrIpTcpRowStatusEntry OBJECT-TYPE SYNTAX VrIpTcpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpTcp component." INDEX { vrIndex, vrIpIndex, vrIpTcpIndex } ::= { vrIpTcpRowStatusTable 1 } VrIpTcpRowStatusEntry ::= SEQUENCE { vrIpTcpRowStatus RowStatus, vrIpTcpComponentName DisplayString, vrIpTcpStorageType StorageType, vrIpTcpIndex NonReplicated } vrIpTcpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpTcp components. These components cannot be added nor deleted." ::= { vrIpTcpRowStatusEntry 1 } vrIpTcpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpTcpRowStatusEntry 2 } vrIpTcpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpTcp tables." ::= { vrIpTcpRowStatusEntry 4 } vrIpTcpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpTcp tables." ::= { vrIpTcpRowStatusEntry 10 } vrIpTcpStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpTcpStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains statistics for TCP." ::= { vrIpTcp 10 } vrIpTcpStatsEntry OBJECT-TYPE SYNTAX VrIpTcpStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpTcpStatsTable." INDEX { vrIndex, vrIpIndex, vrIpTcpIndex } ::= { vrIpTcpStatsTable 1 } VrIpTcpStatsEntry ::= SEQUENCE { vrIpTcpRToAlgorithm INTEGER, vrIpTcpRToMin Unsigned32, vrIpTcpRToMax Unsigned32, vrIpTcpMaxConn INTEGER, vrIpTcpActiveOpens Counter32, vrIpTcpPassiveOpens Counter32, vrIpTcpAttemptFails Counter32, vrIpTcpEstabResets Counter32, vrIpTcpCurrEstab Gauge32, vrIpTcpInSegs Counter32, vrIpTcpOutSegs Counter32, vrIpTcpRetransSegs Counter32, vrIpTcpInErrs Counter32, vrIpTcpOutRsts Counter32 } vrIpTcpRToAlgorithm OBJECT-TYPE SYNTAX INTEGER { other(1), constant(2), rsre(3), vanJacobson(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicate which algorithm was used to calculate the timeout value used for retransmitting unackowledged octet." ::= { vrIpTcpStatsEntry 1 } vrIpTcpRToMin OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Indicate the minimum value, measured in milliseconds, allowed for retransmission timeout." DEFVAL { 0 } ::= { vrIpTcpStatsEntry 2 } vrIpTcpRToMax OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the maximun value, measured in milliseconds, allowed for retransmission timeout." ::= { vrIpTcpStatsEntry 3 } vrIpTcpMaxConn OBJECT-TYPE SYNTAX INTEGER (-1) ACCESS read-only STATUS mandatory DESCRIPTION "Limit on number of connections the TCP can support. The value is always -1 which indicates that the number of connections supported is dynamic (limited by memory in the system)." DEFVAL { -1 } ::= { vrIpTcpStatsEntry 4 } vrIpTcpActiveOpens OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times TCP connections have made a direct transition to the synSent state from the closed state." ::= { vrIpTcpStatsEntry 5 } vrIpTcpPassiveOpens OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times TCP connections have made a direct transition to the synRcvd state from the listen state." ::= { vrIpTcpStatsEntry 6 } vrIpTcpAttemptFails OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times TCP connections have made a direct transition to the closed state from either the synSent state or the synRcvd state, plus the number of times TCP connections have made a direct transition to the listen state from the synRcvd state." ::= { vrIpTcpStatsEntry 7 } vrIpTcpEstabResets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times TCP connections have made a direct transition to the closed state from either the established state or the closedWait state." ::= { vrIpTcpStatsEntry 8 } vrIpTcpCurrEstab OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The number of TCP connections for which the current state is either established or closedWait." ::= { vrIpTcpStatsEntry 9 } vrIpTcpInSegs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of segments received, including those received in error. This count includes segments received on currently established connections." ::= { vrIpTcpStatsEntry 10 } vrIpTcpOutSegs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of segments sent, including those on current connections but excluding those containing only retransmitted octets." ::= { vrIpTcpStatsEntry 11 } vrIpTcpRetransSegs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of segments retransmitted that is, the number of TCP segments transmitted containing one or more previously transmitted octets." ::= { vrIpTcpStatsEntry 12 } vrIpTcpInErrs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Total number of segments received in error, for example bad TCP checksum." ::= { vrIpTcpStatsEntry 13 } vrIpTcpOutRsts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of TCP segments sent containing the RST flag." ::= { vrIpTcpStatsEntry 14 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- The component defines an entry in the TCP connection table. Each entry -- corresponds to TCP end-point identified by 4-tuples, LocalAddress, -- LocalPort, RemoteAddress, and RemotePort. vrIpTcpTcpEntry OBJECT IDENTIFIER ::= { vrIpTcp 2 } vrIpTcpTcpEntryRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpTcpTcpEntryRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpTcpTcpEntry components." ::= { vrIpTcpTcpEntry 1 } vrIpTcpTcpEntryRowStatusEntry OBJECT-TYPE SYNTAX VrIpTcpTcpEntryRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpTcpTcpEntry component." INDEX { vrIndex, vrIpIndex, vrIpTcpIndex, vrIpTcpTcpEntryLocalAddressIndex, vrIpTcpTcpEntryLocalPortIndex, vrIpTcpTcpEntryRemoteAddressIndex, vrIpTcpTcpEntryRemotePortIndex } ::= { vrIpTcpTcpEntryRowStatusTable 1 } VrIpTcpTcpEntryRowStatusEntry ::= SEQUENCE { vrIpTcpTcpEntryRowStatus RowStatus, vrIpTcpTcpEntryComponentName DisplayString, vrIpTcpTcpEntryStorageType StorageType, vrIpTcpTcpEntryLocalAddressIndex IpAddress, vrIpTcpTcpEntryLocalPortIndex Integer32, vrIpTcpTcpEntryRemoteAddressIndex IpAddress, vrIpTcpTcpEntryRemotePortIndex Integer32 } vrIpTcpTcpEntryRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpTcpTcpEntry components. These components cannot be added nor deleted." ::= { vrIpTcpTcpEntryRowStatusEntry 1 } vrIpTcpTcpEntryComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpTcpTcpEntryRowStatusEntry 2 } vrIpTcpTcpEntryStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpTcpTcpEntry tables." ::= { vrIpTcpTcpEntryRowStatusEntry 4 } vrIpTcpTcpEntryLocalAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpTcpTcpEntry tables." ::= { vrIpTcpTcpEntryRowStatusEntry 10 } vrIpTcpTcpEntryLocalPortIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpTcpTcpEntry tables." ::= { vrIpTcpTcpEntryRowStatusEntry 11 } vrIpTcpTcpEntryRemoteAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpTcpTcpEntry tables." ::= { vrIpTcpTcpEntryRowStatusEntry 12 } vrIpTcpTcpEntryRemotePortIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpTcpTcpEntry tables." ::= { vrIpTcpTcpEntryRowStatusEntry 13 } vrIpTcpTcpEntryOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpTcpTcpEntryOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains columnar entries for each end-point on the TCP." ::= { vrIpTcpTcpEntry 10 } vrIpTcpTcpEntryOperEntry OBJECT-TYPE SYNTAX VrIpTcpTcpEntryOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpTcpTcpEntryOperTable." INDEX { vrIndex, vrIpIndex, vrIpTcpIndex, vrIpTcpTcpEntryLocalAddressIndex, vrIpTcpTcpEntryLocalPortIndex, vrIpTcpTcpEntryRemoteAddressIndex, vrIpTcpTcpEntryRemotePortIndex } ::= { vrIpTcpTcpEntryOperTable 1 } VrIpTcpTcpEntryOperEntry ::= SEQUENCE { vrIpTcpTcpEntryState INTEGER } vrIpTcpTcpEntryState OBJECT-TYPE SYNTAX INTEGER { closed(1), listen(2), synSent(3), synReceived(4), established(5), closeWait(6), finWait1(7), closing(8), lastAck(9), finWait2(10), timeWait(11), delete(12) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute reflects the current state of this Tcp connection." ::= { vrIpTcpTcpEntryOperEntry 1 } -- Vr/<string> Ip BootpRelayAgent -- The BootpRelayAgent component contains all the necessary attributes -- and components to provision a BOOTP relay agent. The BOOTP relay -- agent functionality conforms to that described in RFCs 951 and 1542. -- -- The purpose of the BOOTP relay agent is to forward BOOTP request -- packets from a client to a server, and also to deliver server BOOTP -- replies back to the client. When a BOOTP request is received on a port, -- the request will be sent to a provisioned list of IP addresses for that port. -- In addition, the request will be broadcast out all other BOOTP ports -- which allow it. vrIpBootp OBJECT IDENTIFIER ::= { vrIp 16 } vrIpBootpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpBootpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpBootp components." ::= { vrIpBootp 1 } vrIpBootpRowStatusEntry OBJECT-TYPE SYNTAX VrIpBootpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpBootp component." INDEX { vrIndex, vrIpIndex, vrIpBootpIndex } ::= { vrIpBootpRowStatusTable 1 } VrIpBootpRowStatusEntry ::= SEQUENCE { vrIpBootpRowStatus RowStatus, vrIpBootpComponentName DisplayString, vrIpBootpStorageType StorageType, vrIpBootpIndex NonReplicated } vrIpBootpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpBootp components. These components can be added and deleted." ::= { vrIpBootpRowStatusEntry 1 } vrIpBootpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpBootpRowStatusEntry 2 } vrIpBootpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpBootp tables." ::= { vrIpBootpRowStatusEntry 4 } vrIpBootpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpBootp tables." ::= { vrIpBootpRowStatusEntry 10 } vrIpBootpAdminControlTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpBootpAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component." ::= { vrIpBootp 10 } vrIpBootpAdminControlEntry OBJECT-TYPE SYNTAX VrIpBootpAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpBootpAdminControlTable." INDEX { vrIndex, vrIpIndex, vrIpBootpIndex } ::= { vrIpBootpAdminControlTable 1 } VrIpBootpAdminControlEntry ::= SEQUENCE { vrIpBootpSnmpAdminStatus INTEGER } vrIpBootpSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpBootpAdminControlEntry 1 } vrIpBootpProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpBootpProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains provisionable attributes for the BootpRelayAgent component." ::= { vrIpBootp 11 } vrIpBootpProvEntry OBJECT-TYPE SYNTAX VrIpBootpProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpBootpProvTable." INDEX { vrIndex, vrIpIndex, vrIpBootpIndex } ::= { vrIpBootpProvTable 1 } VrIpBootpProvEntry ::= SEQUENCE { vrIpBootpHopDiscardThreshold Unsigned32 } vrIpBootpHopDiscardThreshold OBJECT-TYPE SYNTAX Unsigned32 (2..16) ACCESS read-write STATUS mandatory DESCRIPTION "BOOTP packets contain a 'hops' field which is used to limit the number of relay agents that can process the packet (each relay agent increments the 'hops' field by one). This attribute is used by the relay agent to determine when to discard a BOOTP packet. If the 'hops' field exceeds the hopDiscardThreshold the BOOTP packet will be discarded." DEFVAL { 4 } ::= { vrIpBootpProvEntry 1 } vrIpBootpStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpBootpStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrIpBootp 12 } vrIpBootpStateEntry OBJECT-TYPE SYNTAX VrIpBootpStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpBootpStateTable." INDEX { vrIndex, vrIpIndex, vrIpBootpIndex } ::= { vrIpBootpStateTable 1 } VrIpBootpStateEntry ::= SEQUENCE { vrIpBootpAdminState INTEGER, vrIpBootpOperationalState INTEGER, vrIpBootpUsageState INTEGER } vrIpBootpAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrIpBootpStateEntry 1 } vrIpBootpOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrIpBootpStateEntry 2 } vrIpBootpUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrIpBootpStateEntry 3 } vrIpBootpOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpBootpOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { vrIpBootp 13 } vrIpBootpOperStatusEntry OBJECT-TYPE SYNTAX VrIpBootpOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpBootpOperStatusTable." INDEX { vrIndex, vrIpIndex, vrIpBootpIndex } ::= { vrIpBootpOperStatusTable 1 } VrIpBootpOperStatusEntry ::= SEQUENCE { vrIpBootpSnmpOperStatus INTEGER } vrIpBootpSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpBootpOperStatusEntry 1 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/<string> Ip BootpRelayAgent BootpPortEntry/<string> -- The BootpPortEntry component contains information about the -- provisioned BootpPort's under IpPort components. This component is -- indexed by a string which represents a VirtualRouter ProtocolPort -- component name. vrIpBootpPpE OBJECT IDENTIFIER ::= { vrIpBootp 2 } vrIpBootpPpERowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpBootpPpERowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpBootpPpE components." ::= { vrIpBootpPpE 1 } vrIpBootpPpERowStatusEntry OBJECT-TYPE SYNTAX VrIpBootpPpERowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpBootpPpE component." INDEX { vrIndex, vrIpIndex, vrIpBootpIndex, vrIpBootpPpEIndex } ::= { vrIpBootpPpERowStatusTable 1 } VrIpBootpPpERowStatusEntry ::= SEQUENCE { vrIpBootpPpERowStatus RowStatus, vrIpBootpPpEComponentName DisplayString, vrIpBootpPpEStorageType StorageType, vrIpBootpPpEIndex AsciiStringIndex } vrIpBootpPpERowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpBootpPpE components. These components cannot be added nor deleted." ::= { vrIpBootpPpERowStatusEntry 1 } vrIpBootpPpEComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpBootpPpERowStatusEntry 2 } vrIpBootpPpEStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpBootpPpE tables." ::= { vrIpBootpPpERowStatusEntry 4 } vrIpBootpPpEIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..20)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpBootpPpE tables." ::= { vrIpBootpPpERowStatusEntry 10 } vrIpBootpPpEOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpBootpPpEOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains BootpPortEntry component operational data." ::= { vrIpBootpPpE 10 } vrIpBootpPpEOperEntry OBJECT-TYPE SYNTAX VrIpBootpPpEOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpBootpPpEOperTable." INDEX { vrIndex, vrIpIndex, vrIpBootpIndex, vrIpBootpPpEIndex } ::= { vrIpBootpPpEOperTable 1 } VrIpBootpPpEOperEntry ::= SEQUENCE { vrIpBootpPpEStatus INTEGER } vrIpBootpPpEStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), disabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the status of the provisioned BootpPortEntry component. A value of disabled is used when the parent components, Vr, Ip, IpPort, or BootpRelayAgent is in a disabled state. A value of up is used when the BootpPortEntry is in an operational state. A state of down is used if the media associated with the BootpPortEntry is not ready or disabled." ::= { vrIpBootpPpEOperEntry 1 } vrIpBootpPpEStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpBootpPpEStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains BootpPortEntry component statistics." ::= { vrIpBootpPpE 11 } vrIpBootpPpEStatsEntry OBJECT-TYPE SYNTAX VrIpBootpPpEStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpBootpPpEStatsTable." INDEX { vrIndex, vrIpIndex, vrIpBootpIndex, vrIpBootpPpEIndex } ::= { vrIpBootpPpEStatsTable 1 } VrIpBootpPpEStatsEntry ::= SEQUENCE { vrIpBootpPpEInRequests Counter32, vrIpBootpPpEInReplies Counter32, vrIpBootpPpEOutRequests Counter32, vrIpBootpPpEOutReplies Counter32, vrIpBootpPpEInRequestErrors Counter32, vrIpBootpPpEInReplyErrors Counter32 } vrIpBootpPpEInRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of BOOTP Request messages received on this port." ::= { vrIpBootpPpEStatsEntry 1 } vrIpBootpPpEInReplies OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of BOOTP Reply messages received on this port." ::= { vrIpBootpPpEStatsEntry 2 } vrIpBootpPpEOutRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts total the number of BOOTP Request messages broadcast out on this port." ::= { vrIpBootpPpEStatsEntry 3 } vrIpBootpPpEOutReplies OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of BOOTP Reply messages sent out on this port." ::= { vrIpBootpPpEStatsEntry 4 } vrIpBootpPpEInRequestErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of BOOTP Request messages received on this port but not forwarded due to an error. An error occurs if the BOOTP hop limit has been exceeded." ::= { vrIpBootpPpEStatsEntry 5 } vrIpBootpPpEInReplyErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of BOOTP Reply messages received on this port but not forwarded due to an error. An error occurs if the giaddr field in the BOOTP reply does not match an IP address assigned to this VirtualRouter, or if the output IpPort for the BOOTP reply is not provisioned for BOOTP." ::= { vrIpBootpPpEStatsEntry 6 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/<string> Ip Cache/n -- This component represents the IP cache table on LP n. vrIpCache OBJECT IDENTIFIER ::= { vrIp 17 } vrIpCacheRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpCacheRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpCache components." ::= { vrIpCache 1 } vrIpCacheRowStatusEntry OBJECT-TYPE SYNTAX VrIpCacheRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpCache component." INDEX { vrIndex, vrIpIndex, vrIpCacheIndex } ::= { vrIpCacheRowStatusTable 1 } VrIpCacheRowStatusEntry ::= SEQUENCE { vrIpCacheRowStatus RowStatus, vrIpCacheComponentName DisplayString, vrIpCacheStorageType StorageType, vrIpCacheIndex Integer32 } vrIpCacheRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpCache components. These components cannot be added nor deleted." ::= { vrIpCacheRowStatusEntry 1 } vrIpCacheComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpCacheRowStatusEntry 2 } vrIpCacheStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpCache tables." ::= { vrIpCacheRowStatusEntry 4 } vrIpCacheIndex OBJECT-TYPE SYNTAX Integer32 (0..15) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpCache tables." ::= { vrIpCacheRowStatusEntry 10 } vrIpCacheStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpCacheStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrIpCache 10 } vrIpCacheStateEntry OBJECT-TYPE SYNTAX VrIpCacheStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpCacheStateTable." INDEX { vrIndex, vrIpIndex, vrIpCacheIndex } ::= { vrIpCacheStateTable 1 } VrIpCacheStateEntry ::= SEQUENCE { vrIpCacheAdminState INTEGER, vrIpCacheOperationalState INTEGER, vrIpCacheUsageState INTEGER } vrIpCacheAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrIpCacheStateEntry 1 } vrIpCacheOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrIpCacheStateEntry 2 } vrIpCacheUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrIpCacheStateEntry 3 } vrIpCacheOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpCacheOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group houses all the operational attributes of an Ip cache table." ::= { vrIpCache 11 } vrIpCacheOperEntry OBJECT-TYPE SYNTAX VrIpCacheOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpCacheOperTable." INDEX { vrIndex, vrIpIndex, vrIpCacheIndex } ::= { vrIpCacheOperTable 1 } VrIpCacheOperEntry ::= SEQUENCE { vrIpCacheEntriesFree Unsigned32, vrIpCacheTotalLookups Unsigned32, vrIpCacheLookupMisses Counter32, vrIpCacheCacheTableMaxEntries Unsigned32 } vrIpCacheEntriesFree OBJECT-TYPE SYNTAX Unsigned32 (0..8000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is indicative of the number of free Ip cache table entries. A consistently high value for this attribute indicates that there is a resource surplus of the memory requirements for cache table. This surplus could be utilized elsewhere if needed by adjusting the cacheTableMaxEntries under the Ip component." ::= { vrIpCacheOperEntry 3 } vrIpCacheTotalLookups OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the total number of local cache lookups. It wraps around to 0 when it reaches the maximum value of 4294967295." ::= { vrIpCacheOperEntry 4 } vrIpCacheLookupMisses OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the total number of local cache lookup misses. It wraps around to 0 when it reaches the maximum value of 4294967295." ::= { vrIpCacheOperEntry 5 } vrIpCacheCacheTableMaxEntries OBJECT-TYPE SYNTAX Unsigned32 (0..8000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current maximum number of entries that can exist in the IP local cache table on each LP." ::= { vrIpCacheOperEntry 395 } -- Vr/<string> Ip Tunnel -- The Tunnel component is used to add, delete and modify tunnel end -- points. vrIpTunnel OBJECT IDENTIFIER ::= { vrIp 18 } vrIpTunnelRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpTunnelRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpTunnel components." ::= { vrIpTunnel 1 } vrIpTunnelRowStatusEntry OBJECT-TYPE SYNTAX VrIpTunnelRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpTunnel component." INDEX { vrIndex, vrIpIndex, vrIpTunnelIndex } ::= { vrIpTunnelRowStatusTable 1 } VrIpTunnelRowStatusEntry ::= SEQUENCE { vrIpTunnelRowStatus RowStatus, vrIpTunnelComponentName DisplayString, vrIpTunnelStorageType StorageType, vrIpTunnelIndex NonReplicated } vrIpTunnelRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpTunnel components. These components can be added and deleted." ::= { vrIpTunnelRowStatusEntry 1 } vrIpTunnelComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpTunnelRowStatusEntry 2 } vrIpTunnelStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpTunnel tables." ::= { vrIpTunnelRowStatusEntry 4 } vrIpTunnelIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpTunnel tables." ::= { vrIpTunnelRowStatusEntry 10 } vrIpTunnelStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpTunnelStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrIpTunnel 10 } vrIpTunnelStateEntry OBJECT-TYPE SYNTAX VrIpTunnelStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpTunnelStateTable." INDEX { vrIndex, vrIpIndex, vrIpTunnelIndex } ::= { vrIpTunnelStateTable 1 } VrIpTunnelStateEntry ::= SEQUENCE { vrIpTunnelAdminState INTEGER, vrIpTunnelOperationalState INTEGER, vrIpTunnelUsageState INTEGER } vrIpTunnelAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrIpTunnelStateEntry 1 } vrIpTunnelOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrIpTunnelStateEntry 2 } vrIpTunnelUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrIpTunnelStateEntry 3 } -- Vr/<string> Ip Tunnel StaticEndPoint/n -- IP tunnel allows two geographically separated networks to be -- connected over a shared IP network (e.g. the Internet), either -- because the networks at the end points are using private IP address -- or they are not running IP as the network protocol. -- -- This component represents a static IP Tunnel End Point. It is static -- in the sense that both the tunnel source and destination IP addresses -- are static configured. For proper operation of the tunnel, the exact -- source and destination IP addresses (in reverse order) must be used -- to provision the Tunnel End Point on the far end router. -- -- Two types of IP tunnel encapsulation are supported: IP in IP as -- specified in RFC 2003 and Generic Routing Encapsulation as -- specified in RFC 1701. -- vrIpTunnelSep OBJECT IDENTIFIER ::= { vrIpTunnel 2 } vrIpTunnelSepRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpTunnelSepRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpTunnelSep components." ::= { vrIpTunnelSep 1 } vrIpTunnelSepRowStatusEntry OBJECT-TYPE SYNTAX VrIpTunnelSepRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpTunnelSep component." INDEX { vrIndex, vrIpIndex, vrIpTunnelIndex, vrIpTunnelSepIndex } ::= { vrIpTunnelSepRowStatusTable 1 } VrIpTunnelSepRowStatusEntry ::= SEQUENCE { vrIpTunnelSepRowStatus RowStatus, vrIpTunnelSepComponentName DisplayString, vrIpTunnelSepStorageType StorageType, vrIpTunnelSepIndex Integer32 } vrIpTunnelSepRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpTunnelSep components. These components can be added and deleted." ::= { vrIpTunnelSepRowStatusEntry 1 } vrIpTunnelSepComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpTunnelSepRowStatusEntry 2 } vrIpTunnelSepStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpTunnelSep tables." ::= { vrIpTunnelSepRowStatusEntry 4 } vrIpTunnelSepIndex OBJECT-TYPE SYNTAX Integer32 (0..63) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpTunnelSep tables." ::= { vrIpTunnelSepRowStatusEntry 10 } vrIpTunnelSepIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpTunnelSepIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { vrIpTunnelSep 10 } vrIpTunnelSepIfEntryEntry OBJECT-TYPE SYNTAX VrIpTunnelSepIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpTunnelSepIfEntryTable." INDEX { vrIndex, vrIpIndex, vrIpTunnelIndex, vrIpTunnelSepIndex } ::= { vrIpTunnelSepIfEntryTable 1 } VrIpTunnelSepIfEntryEntry ::= SEQUENCE { vrIpTunnelSepIfAdminStatus INTEGER, vrIpTunnelSepIfIndex InterfaceIndex } vrIpTunnelSepIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpTunnelSepIfEntryEntry 1 } vrIpTunnelSepIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { vrIpTunnelSepIfEntryEntry 2 } vrIpTunnelSepMpTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpTunnelSepMpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the base provisioning data for the media base component." ::= { vrIpTunnelSep 11 } vrIpTunnelSepMpEntry OBJECT-TYPE SYNTAX VrIpTunnelSepMpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpTunnelSepMpTable." INDEX { vrIndex, vrIpIndex, vrIpTunnelIndex, vrIpTunnelSepIndex } ::= { vrIpTunnelSepMpTable 1 } VrIpTunnelSepMpEntry ::= SEQUENCE { vrIpTunnelSepLinkToProtocolPort Link } vrIpTunnelSepLinkToProtocolPort OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the ProtocolPort to which this interface is linked to. The protocol port is the logical interface to the network. The protocol port component describes the logical characteristics of this interface." ::= { vrIpTunnelSepMpEntry 1 } vrIpTunnelSepProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpTunnelSepProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the StaticEndPoint component." ::= { vrIpTunnelSep 12 } vrIpTunnelSepProvEntry OBJECT-TYPE SYNTAX VrIpTunnelSepProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpTunnelSepProvTable." INDEX { vrIndex, vrIpIndex, vrIpTunnelIndex, vrIpTunnelSepIndex } ::= { vrIpTunnelSepProvTable 1 } VrIpTunnelSepProvEntry ::= SEQUENCE { vrIpTunnelSepEncapType INTEGER, vrIpTunnelSepSourceAddress IpAddress, vrIpTunnelSepDestinationAddress IpAddress } vrIpTunnelSepEncapType OBJECT-TYPE SYNTAX INTEGER { ipInIp(0), greIp(1) } ACCESS read-write STATUS mandatory DESCRIPTION "There are two types of encapsulation techniques for IP tunnel, IP in IP (RFC 2003) and GRE over IP (RFC 1701). This attributes specifies the encapsulation type of the IP tunnel. It defaults to ipInIp. ipInIp: As defined in RFC 2003, it can be used to encapsulated IP and IP payload only. If IP is the only type of payload to be encapsulated by the tunnel, this type of encapsulation is recommended as it requires less processing and uses less bandwidth. greIp: As defined in RFC 1701, it can be used to encapsulate IP or IPX payload. To encapsulate IPX payload, this encapsulation type must be used." DEFVAL { ipInIp } ::= { vrIpTunnelSepProvEntry 1 } vrIpTunnelSepSourceAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the IP address of the local end of the tunnel. The source address must be an address in the shared domain, and it must equal to an interface address on its own Virtual Router (under Vr/<string> Pp/<string> IpPort LogicalIf/<IpAddress>). However, it must not be the interface address of the linked protocol port's IpPort." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrIpTunnelSepProvEntry 2 } vrIpTunnelSepDestinationAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the IP address of the far end of the tunnel. It must not match any of the IP interface addresses on this Virtual Router." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrIpTunnelSepProvEntry 3 } vrIpTunnelSepOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpTunnelSepOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational status attributes of the StaticEndPoint component." ::= { vrIpTunnelSep 14 } vrIpTunnelSepOperEntry OBJECT-TYPE SYNTAX VrIpTunnelSepOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpTunnelSepOperTable." INDEX { vrIndex, vrIpIndex, vrIpTunnelIndex, vrIpTunnelSepIndex } ::= { vrIpTunnelSepOperTable 1 } VrIpTunnelSepOperEntry ::= SEQUENCE { vrIpTunnelSepPathMtu Unsigned32 } vrIpTunnelSepPathMtu OBJECT-TYPE SYNTAX Unsigned32 (0..0 | 576..18944) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the latest learned Path MTU of the tunnel. MTU is the maximum transmission unit of an arbitrary internet path. When a large amount of IP datagrams are to be transmitted, it is usually preferable that the datagrams be of the largest size that does not require fragmentation anywhere along the path from the source to the destination. This datagram size is referred to as the Path MTU (PMTU), and it is equal to the minimum of the MTUs of each hop in the path." DEFVAL { 0 } ::= { vrIpTunnelSepOperEntry 1 } -- Vr/<string> Ip Multicast -- This component provides support for IP Multicast. vrIpMcast OBJECT IDENTIFIER ::= { vrIp 26 } vrIpMcastRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpMcast components." ::= { vrIpMcast 1 } vrIpMcastRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcast component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex } ::= { vrIpMcastRowStatusTable 1 } VrIpMcastRowStatusEntry ::= SEQUENCE { vrIpMcastRowStatus RowStatus, vrIpMcastComponentName DisplayString, vrIpMcastStorageType StorageType, vrIpMcastIndex NonReplicated } vrIpMcastRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcast components. These components can be added and deleted." ::= { vrIpMcastRowStatusEntry 1 } vrIpMcastComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastRowStatusEntry 2 } vrIpMcastStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcast tables." ::= { vrIpMcastRowStatusEntry 4 } vrIpMcastIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpMcast tables." ::= { vrIpMcastRowStatusEntry 10 } vrIpMcastAdminControlTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component." ::= { vrIpMcast 100 } vrIpMcastAdminControlEntry OBJECT-TYPE SYNTAX VrIpMcastAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastAdminControlTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex } ::= { vrIpMcastAdminControlTable 1 } VrIpMcastAdminControlEntry ::= SEQUENCE { vrIpMcastSnmpAdminStatus INTEGER } vrIpMcastSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpMcastAdminControlEntry 1 } vrIpMcastStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrIpMcast 103 } vrIpMcastStateEntry OBJECT-TYPE SYNTAX VrIpMcastStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastStateTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex } ::= { vrIpMcastStateTable 1 } VrIpMcastStateEntry ::= SEQUENCE { vrIpMcastAdminState INTEGER, vrIpMcastOperationalState INTEGER, vrIpMcastUsageState INTEGER } vrIpMcastAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrIpMcastStateEntry 1 } vrIpMcastOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrIpMcastStateEntry 2 } vrIpMcastUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrIpMcastStateEntry 3 } vrIpMcastOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { vrIpMcast 104 } vrIpMcastOperStatusEntry OBJECT-TYPE SYNTAX VrIpMcastOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastOperStatusTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex } ::= { vrIpMcastOperStatusTable 1 } VrIpMcastOperStatusEntry ::= SEQUENCE { vrIpMcastSnmpOperStatus INTEGER } vrIpMcastSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpMcastOperStatusEntry 1 } vrIpMcastCtsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastCtsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of entries supported in the IP Multicast cache table on each LP. The default is 100 for a CP and 200 for an FP. The value must be multiple of 100." ::= { vrIpMcast 701 } vrIpMcastCtsEntry OBJECT-TYPE SYNTAX VrIpMcastCtsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastCtsTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastCtsIndex } ::= { vrIpMcastCtsTable 1 } VrIpMcastCtsEntry ::= SEQUENCE { vrIpMcastCtsIndex Integer32, vrIpMcastCtsValue Unsigned32 } vrIpMcastCtsIndex OBJECT-TYPE SYNTAX Integer32 (0..15) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the vrIpMcastCtsTable specific index for the vrIpMcastCtsTable." ::= { vrIpMcastCtsEntry 1 } vrIpMcastCtsValue OBJECT-TYPE SYNTAX Unsigned32 (100..500) ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents an individual value for the vrIpMcastCtsTable." ::= { vrIpMcastCtsEntry 2 } -- Vr/<string> Ip Mcast Igmp -- This component provides support for the IGMP protocol. vrIpMcastIgmp OBJECT IDENTIFIER ::= { vrIpMcast 2 } vrIpMcastIgmpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastIgmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpMcastIgmp components." ::= { vrIpMcastIgmp 1 } vrIpMcastIgmpRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastIgmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastIgmp component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastIgmpIndex } ::= { vrIpMcastIgmpRowStatusTable 1 } VrIpMcastIgmpRowStatusEntry ::= SEQUENCE { vrIpMcastIgmpRowStatus RowStatus, vrIpMcastIgmpComponentName DisplayString, vrIpMcastIgmpStorageType StorageType, vrIpMcastIgmpIndex NonReplicated } vrIpMcastIgmpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastIgmp components. These components can be added and deleted." ::= { vrIpMcastIgmpRowStatusEntry 1 } vrIpMcastIgmpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastIgmpRowStatusEntry 2 } vrIpMcastIgmpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastIgmp tables." ::= { vrIpMcastIgmpRowStatusEntry 4 } vrIpMcastIgmpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpMcastIgmp tables." ::= { vrIpMcastIgmpRowStatusEntry 10 } vrIpMcastIgmpAdminControlTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastIgmpAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component." ::= { vrIpMcastIgmp 10 } vrIpMcastIgmpAdminControlEntry OBJECT-TYPE SYNTAX VrIpMcastIgmpAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastIgmpAdminControlTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastIgmpIndex } ::= { vrIpMcastIgmpAdminControlTable 1 } VrIpMcastIgmpAdminControlEntry ::= SEQUENCE { vrIpMcastIgmpSnmpAdminStatus INTEGER } vrIpMcastIgmpSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpMcastIgmpAdminControlEntry 1 } vrIpMcastIgmpStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastIgmpStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrIpMcastIgmp 12 } vrIpMcastIgmpStateEntry OBJECT-TYPE SYNTAX VrIpMcastIgmpStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastIgmpStateTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastIgmpIndex } ::= { vrIpMcastIgmpStateTable 1 } VrIpMcastIgmpStateEntry ::= SEQUENCE { vrIpMcastIgmpAdminState INTEGER, vrIpMcastIgmpOperationalState INTEGER, vrIpMcastIgmpUsageState INTEGER } vrIpMcastIgmpAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrIpMcastIgmpStateEntry 1 } vrIpMcastIgmpOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrIpMcastIgmpStateEntry 2 } vrIpMcastIgmpUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrIpMcastIgmpStateEntry 3 } vrIpMcastIgmpOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastIgmpOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { vrIpMcastIgmp 13 } vrIpMcastIgmpOperStatusEntry OBJECT-TYPE SYNTAX VrIpMcastIgmpOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastIgmpOperStatusTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastIgmpIndex } ::= { vrIpMcastIgmpOperStatusTable 1 } VrIpMcastIgmpOperStatusEntry ::= SEQUENCE { vrIpMcastIgmpSnmpOperStatus INTEGER } vrIpMcastIgmpSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpMcastIgmpOperStatusEntry 1 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/<string> Ip Mcast Igmp CacheEntry <ipAddress>, -- <domain>, <ppString> -- This component represents an entry in the IGMP cache table. vrIpMcastIgmpGc OBJECT IDENTIFIER ::= { vrIpMcastIgmp 2 } vrIpMcastIgmpGcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastIgmpGcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpMcastIgmpGc components." ::= { vrIpMcastIgmpGc 1 } vrIpMcastIgmpGcRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastIgmpGcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastIgmpGc component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastIgmpIndex, vrIpMcastIgmpGcGAddrIndex, vrIpMcastIgmpGcDomainIndex, vrIpMcastIgmpGcProtocolportStringIndex } ::= { vrIpMcastIgmpGcRowStatusTable 1 } VrIpMcastIgmpGcRowStatusEntry ::= SEQUENCE { vrIpMcastIgmpGcRowStatus RowStatus, vrIpMcastIgmpGcComponentName DisplayString, vrIpMcastIgmpGcStorageType StorageType, vrIpMcastIgmpGcGAddrIndex IpAddress, vrIpMcastIgmpGcDomainIndex Integer32, vrIpMcastIgmpGcProtocolportStringIndex AsciiStringIndex } vrIpMcastIgmpGcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastIgmpGc components. These components cannot be added nor deleted." ::= { vrIpMcastIgmpGcRowStatusEntry 1 } vrIpMcastIgmpGcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastIgmpGcRowStatusEntry 2 } vrIpMcastIgmpGcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastIgmpGc tables." ::= { vrIpMcastIgmpGcRowStatusEntry 4 } vrIpMcastIgmpGcGAddrIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastIgmpGc tables." ::= { vrIpMcastIgmpGcRowStatusEntry 10 } vrIpMcastIgmpGcDomainIndex OBJECT-TYPE SYNTAX Integer32 (0..3) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastIgmpGc tables." ::= { vrIpMcastIgmpGcRowStatusEntry 11 } vrIpMcastIgmpGcProtocolportStringIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..20)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastIgmpGc tables." ::= { vrIpMcastIgmpGcRowStatusEntry 12 } vrIpMcastIgmpGcOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastIgmpGcOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of the CacheEntry component." ::= { vrIpMcastIgmpGc 11 } vrIpMcastIgmpGcOperEntry OBJECT-TYPE SYNTAX VrIpMcastIgmpGcOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastIgmpGcOperTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastIgmpIndex, vrIpMcastIgmpGcGAddrIndex, vrIpMcastIgmpGcDomainIndex, vrIpMcastIgmpGcProtocolportStringIndex } ::= { vrIpMcastIgmpGcOperTable 1 } VrIpMcastIgmpGcOperEntry ::= SEQUENCE { vrIpMcastIgmpGcUpTime EnterpriseDateAndTime, vrIpMcastIgmpGcExpiryTime EnterpriseDateAndTime, vrIpMcastIgmpGcLastReporter IpAddress, vrIpMcastIgmpGcVersion1HostTimer Unsigned32 } vrIpMcastIgmpGcUpTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the time elapsed since this entry was created." ::= { vrIpMcastIgmpGcOperEntry 1 } vrIpMcastIgmpGcExpiryTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 8)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the minimum amount of time reamining before this entry will be aged out." ::= { vrIpMcastIgmpGcOperEntry 2 } vrIpMcastIgmpGcLastReporter OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the IP address of the source of the last membership report received for this IP Multicast group address on this interface. If no membership report has been received, this attribute has the value 0.0.0.0." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrIpMcastIgmpGcOperEntry 3 } vrIpMcastIgmpGcVersion1HostTimer OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the time remaining until the local router will assume that there are no longer any IGMPv1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is reset to the group membership timer." DEFVAL { 0 } ::= { vrIpMcastIgmpGcOperEntry 4 } -- Vr/<string> Ip Mcast Static -- This component provides support for multicast static routes. vrIpMcastStatic OBJECT IDENTIFIER ::= { vrIpMcast 3 } vrIpMcastStaticRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastStaticRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpMcastStatic components." ::= { vrIpMcastStatic 1 } vrIpMcastStaticRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastStaticRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastStatic component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastStaticIndex } ::= { vrIpMcastStaticRowStatusTable 1 } VrIpMcastStaticRowStatusEntry ::= SEQUENCE { vrIpMcastStaticRowStatus RowStatus, vrIpMcastStaticComponentName DisplayString, vrIpMcastStaticStorageType StorageType, vrIpMcastStaticIndex NonReplicated } vrIpMcastStaticRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastStatic components. These components can be added and deleted." ::= { vrIpMcastStaticRowStatusEntry 1 } vrIpMcastStaticComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastStaticRowStatusEntry 2 } vrIpMcastStaticStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastStatic tables." ::= { vrIpMcastStaticRowStatusEntry 4 } vrIpMcastStaticIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpMcastStatic tables." ::= { vrIpMcastStaticRowStatusEntry 10 } vrIpMcastStaticStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastStaticStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrIpMcastStatic 10 } vrIpMcastStaticStateEntry OBJECT-TYPE SYNTAX VrIpMcastStaticStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastStaticStateTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastStaticIndex } ::= { vrIpMcastStaticStateTable 1 } VrIpMcastStaticStateEntry ::= SEQUENCE { vrIpMcastStaticAdminState INTEGER, vrIpMcastStaticOperationalState INTEGER, vrIpMcastStaticUsageState INTEGER } vrIpMcastStaticAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrIpMcastStaticStateEntry 1 } vrIpMcastStaticOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrIpMcastStaticStateEntry 2 } vrIpMcastStaticUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrIpMcastStaticStateEntry 3 } -- Vr/<string> Ip Mcast Static RouteEntry/<Ip Address>,<domain> -- This component represents a multicast static route entry. For a -- RouteEntry to be valid, there should be at least one OutInterface -- provisioned. vrIpMcastStaticRoute OBJECT IDENTIFIER ::= { vrIpMcastStatic 2 } vrIpMcastStaticRouteRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastStaticRouteRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpMcastStaticRoute components." ::= { vrIpMcastStaticRoute 1 } vrIpMcastStaticRouteRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastStaticRouteRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastStaticRoute component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastStaticIndex, vrIpMcastStaticRouteGAddrIndex, vrIpMcastStaticRouteDomainIndex } ::= { vrIpMcastStaticRouteRowStatusTable 1 } VrIpMcastStaticRouteRowStatusEntry ::= SEQUENCE { vrIpMcastStaticRouteRowStatus RowStatus, vrIpMcastStaticRouteComponentName DisplayString, vrIpMcastStaticRouteStorageType StorageType, vrIpMcastStaticRouteGAddrIndex IpAddress, vrIpMcastStaticRouteDomainIndex Integer32 } vrIpMcastStaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastStaticRoute components. These components can be added and deleted." ::= { vrIpMcastStaticRouteRowStatusEntry 1 } vrIpMcastStaticRouteComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastStaticRouteRowStatusEntry 2 } vrIpMcastStaticRouteStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastStaticRoute tables." ::= { vrIpMcastStaticRouteRowStatusEntry 4 } vrIpMcastStaticRouteGAddrIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastStaticRoute tables." ::= { vrIpMcastStaticRouteRowStatusEntry 10 } vrIpMcastStaticRouteDomainIndex OBJECT-TYPE SYNTAX Integer32 (0..3) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastStaticRoute tables." ::= { vrIpMcastStaticRouteRowStatusEntry 11 } vrIpMcastStaticRouteOifsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastStaticRouteOifsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute specifies a list of links to logicalInterfaces representing the outgoing interfaces for this multicast static route entry." ::= { vrIpMcastStaticRoute 705 } vrIpMcastStaticRouteOifsEntry OBJECT-TYPE SYNTAX VrIpMcastStaticRouteOifsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastStaticRouteOifsTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastStaticIndex, vrIpMcastStaticRouteGAddrIndex, vrIpMcastStaticRouteDomainIndex, vrIpMcastStaticRouteOifsValue } ::= { vrIpMcastStaticRouteOifsTable 1 } VrIpMcastStaticRouteOifsEntry ::= SEQUENCE { vrIpMcastStaticRouteOifsValue Link, vrIpMcastStaticRouteOifsRowStatus RowStatus } vrIpMcastStaticRouteOifsValue OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the vrIpMcastStaticRouteOifsTable." ::= { vrIpMcastStaticRouteOifsEntry 1 } vrIpMcastStaticRouteOifsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the vrIpMcastStaticRouteOifsTable." ::= { vrIpMcastStaticRouteOifsEntry 2 } -- Vr/<string> Ip Mcast PolicyGroup/<string> -- This component represents a multicast group join policy, which -- may be applied to one or more IpPorts. vrIpMcastPg OBJECT IDENTIFIER ::= { vrIpMcast 4 } vrIpMcastPgRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpMcastPg components." ::= { vrIpMcastPg 1 } vrIpMcastPgRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastPgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastPg component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPgIndex } ::= { vrIpMcastPgRowStatusTable 1 } VrIpMcastPgRowStatusEntry ::= SEQUENCE { vrIpMcastPgRowStatus RowStatus, vrIpMcastPgComponentName DisplayString, vrIpMcastPgStorageType StorageType, vrIpMcastPgIndex AsciiStringIndex } vrIpMcastPgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastPg components. These components can be added and deleted." ::= { vrIpMcastPgRowStatusEntry 1 } vrIpMcastPgComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastPgRowStatusEntry 2 } vrIpMcastPgStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastPg tables." ::= { vrIpMcastPgRowStatusEntry 4 } vrIpMcastPgIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..20)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpMcastPg tables." ::= { vrIpMcastPgRowStatusEntry 10 } vrIpMcastPgProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPgProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the PolicyGroup component." ::= { vrIpMcastPg 10 } vrIpMcastPgProvEntry OBJECT-TYPE SYNTAX VrIpMcastPgProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastPgProvTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPgIndex } ::= { vrIpMcastPgProvTable 1 } VrIpMcastPgProvEntry ::= SEQUENCE { vrIpMcastPgAction INTEGER } vrIpMcastPgAction OBJECT-TYPE SYNTAX INTEGER { deny(1), allow(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the action to be taken if a join request is received for any of the multicast group addresses configured as part of this policy. The default action is to deny the join request." DEFVAL { deny } ::= { vrIpMcastPgProvEntry 1 } vrIpMcastPgLinkToPolicyUserTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPgLinkToPolicyUserEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute specifies a list of IpPorts on which this policy group is applied." ::= { vrIpMcastPg 704 } vrIpMcastPgLinkToPolicyUserEntry OBJECT-TYPE SYNTAX VrIpMcastPgLinkToPolicyUserEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastPgLinkToPolicyUserTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPgIndex, vrIpMcastPgLinkToPolicyUserValue } ::= { vrIpMcastPgLinkToPolicyUserTable 1 } VrIpMcastPgLinkToPolicyUserEntry ::= SEQUENCE { vrIpMcastPgLinkToPolicyUserValue Link, vrIpMcastPgLinkToPolicyUserRowStatus RowStatus } vrIpMcastPgLinkToPolicyUserValue OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the vrIpMcastPgLinkToPolicyUserTable." ::= { vrIpMcastPgLinkToPolicyUserEntry 1 } vrIpMcastPgLinkToPolicyUserRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the vrIpMcastPgLinkToPolicyUserTable." ::= { vrIpMcastPgLinkToPolicyUserEntry 2 } -- Vr/<string> Ip Mcast Pg/<string> Group/<IpAddress>, -- <IpAddress> -- This component specifies a range of multicast addresses for which -- the policy group applies. The range is specified as an IP address and -- mask combination. vrIpMcastPgGrp OBJECT IDENTIFIER ::= { vrIpMcastPg 2 } vrIpMcastPgGrpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPgGrpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpMcastPgGrp components." ::= { vrIpMcastPgGrp 1 } vrIpMcastPgGrpRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastPgGrpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastPgGrp component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPgIndex, vrIpMcastPgGrpGAddrIndex, vrIpMcastPgGrpGMaskIndex } ::= { vrIpMcastPgGrpRowStatusTable 1 } VrIpMcastPgGrpRowStatusEntry ::= SEQUENCE { vrIpMcastPgGrpRowStatus RowStatus, vrIpMcastPgGrpComponentName DisplayString, vrIpMcastPgGrpStorageType StorageType, vrIpMcastPgGrpGAddrIndex IpAddress, vrIpMcastPgGrpGMaskIndex IpAddress } vrIpMcastPgGrpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastPgGrp components. These components can be added and deleted." ::= { vrIpMcastPgGrpRowStatusEntry 1 } vrIpMcastPgGrpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastPgGrpRowStatusEntry 2 } vrIpMcastPgGrpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastPgGrp tables." ::= { vrIpMcastPgGrpRowStatusEntry 4 } vrIpMcastPgGrpGAddrIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastPgGrp tables." ::= { vrIpMcastPgGrpRowStatusEntry 10 } vrIpMcastPgGrpGMaskIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastPgGrp tables." ::= { vrIpMcastPgGrpRowStatusEntry 11 } -- This component represents a multicast domain. All routers -- participating in the domain use the same multicast protocol for all -- the intefaces in the domain. vrIpMcastDomain OBJECT IDENTIFIER ::= { vrIpMcast 5 } vrIpMcastDomainRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastDomainRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpMcastDomain components." ::= { vrIpMcastDomain 1 } vrIpMcastDomainRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastDomainRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastDomain component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastDomainIndex } ::= { vrIpMcastDomainRowStatusTable 1 } VrIpMcastDomainRowStatusEntry ::= SEQUENCE { vrIpMcastDomainRowStatus RowStatus, vrIpMcastDomainComponentName DisplayString, vrIpMcastDomainStorageType StorageType, vrIpMcastDomainIndex Integer32 } vrIpMcastDomainRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastDomain components. These components can be added and deleted." ::= { vrIpMcastDomainRowStatusEntry 1 } vrIpMcastDomainComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastDomainRowStatusEntry 2 } vrIpMcastDomainStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastDomain tables." ::= { vrIpMcastDomainRowStatusEntry 4 } vrIpMcastDomainIndex OBJECT-TYPE SYNTAX Integer32 (0..3) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpMcastDomain tables." ::= { vrIpMcastDomainRowStatusEntry 10 } vrIpMcastDomainOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastDomainOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes for the Domain component." ::= { vrIpMcastDomain 11 } vrIpMcastDomainOperEntry OBJECT-TYPE SYNTAX VrIpMcastDomainOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastDomainOperTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastDomainIndex } ::= { vrIpMcastDomainOperTable 1 } VrIpMcastDomainOperEntry ::= SEQUENCE { vrIpMcastDomainProtocolActive INTEGER } vrIpMcastDomainProtocolActive OBJECT-TYPE SYNTAX INTEGER { none(0), pimSm(1), pimDm(2), local(3), dvmrp(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the multicast protocol active in this domain." DEFVAL { none } ::= { vrIpMcastDomainOperEntry 1 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/<string> Ip Mcast ForwardTable/<Ip -- Address>,<Decimal>,<IpAddress><IpAddress> -- This component represents an IP multicast forwarding entry. vrIpMcastFwd OBJECT IDENTIFIER ::= { vrIpMcast 6 } vrIpMcastFwdRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastFwdRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpMcastFwd components." ::= { vrIpMcastFwd 1 } vrIpMcastFwdRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastFwdRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastFwd component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastFwdGAddrIndex, vrIpMcastFwdDomainIndex, vrIpMcastFwdSrcAddrIndex, vrIpMcastFwdSrcMaskIndex } ::= { vrIpMcastFwdRowStatusTable 1 } VrIpMcastFwdRowStatusEntry ::= SEQUENCE { vrIpMcastFwdRowStatus RowStatus, vrIpMcastFwdComponentName DisplayString, vrIpMcastFwdStorageType StorageType, vrIpMcastFwdGAddrIndex IpAddress, vrIpMcastFwdDomainIndex Integer32, vrIpMcastFwdSrcAddrIndex IpAddress, vrIpMcastFwdSrcMaskIndex IpAddress } vrIpMcastFwdRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastFwd components. These components cannot be added nor deleted." ::= { vrIpMcastFwdRowStatusEntry 1 } vrIpMcastFwdComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastFwdRowStatusEntry 2 } vrIpMcastFwdStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastFwd tables." ::= { vrIpMcastFwdRowStatusEntry 4 } vrIpMcastFwdGAddrIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastFwd tables." ::= { vrIpMcastFwdRowStatusEntry 10 } vrIpMcastFwdDomainIndex OBJECT-TYPE SYNTAX Integer32 (0..3) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastFwd tables." ::= { vrIpMcastFwdRowStatusEntry 11 } vrIpMcastFwdSrcAddrIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastFwd tables." ::= { vrIpMcastFwdRowStatusEntry 12 } vrIpMcastFwdSrcMaskIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastFwd tables." ::= { vrIpMcastFwdRowStatusEntry 13 } vrIpMcastFwdOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastFwdOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes associated with a multicast forwarding entry." ::= { vrIpMcastFwd 10 } vrIpMcastFwdOperEntry OBJECT-TYPE SYNTAX VrIpMcastFwdOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastFwdOperTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastFwdGAddrIndex, vrIpMcastFwdDomainIndex, vrIpMcastFwdSrcAddrIndex, vrIpMcastFwdSrcMaskIndex } ::= { vrIpMcastFwdOperTable 1 } VrIpMcastFwdOperEntry ::= SEQUENCE { vrIpMcastFwdAge Unsigned32, vrIpMcastFwdInProtocolPortName RowPointer, vrIpMcastFwdProtocol INTEGER, vrIpMcastFwdReversePathForwardingNeighbor IpAddress, vrIpMcastFwdFlags AsciiString } vrIpMcastFwdAge OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of seconds since this route was last updated." ::= { vrIpMcastFwdOperEntry 2 } vrIpMcastFwdInProtocolPortName OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the name of the (incoming) protocol port from which the route was learned." ::= { vrIpMcastFwdOperEntry 3 } vrIpMcastFwdProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), netmgmt(3), dvmrp(4), mospf(5), pimSparseDense(6), cbt(7), pimSparse(8), pimDense(9), igmponly(10) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the multicast routing protocol via which this multicast forwarding entry was learned." ::= { vrIpMcastFwdOperEntry 4 } vrIpMcastFwdReversePathForwardingNeighbor OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the address of the upstream neighbor (RPF neighbor) from which IP datagrams from these sources to this multicast address are received, or 0.0.0.0 if the upstream is unknown (e.g., in CBT)." ::= { vrIpMcastFwdOperEntry 5 } vrIpMcastFwdFlags OBJECT-TYPE SYNTAX AsciiString (SIZE (3..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates information concerning the forwarding entry. In particular, the flag information indicates wildcard, SPT, RPT, and Reg entries." ::= { vrIpMcastFwdOperEntry 703 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/<string> Ip Mcast Fwd/ -- <IpAddress>,<Decimal>,<IpAddress><IpAddress> OutInterface/ -- <IpAddress>,<Decimal> -- This component represents an out interface for a multicast -- forwarding entry. vrIpMcastFwdOif OBJECT IDENTIFIER ::= { vrIpMcastFwd 2 } vrIpMcastFwdOifRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastFwdOifRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpMcastFwdOif components." ::= { vrIpMcastFwdOif 1 } vrIpMcastFwdOifRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastFwdOifRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastFwdOif component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastFwdGAddrIndex, vrIpMcastFwdDomainIndex, vrIpMcastFwdSrcAddrIndex, vrIpMcastFwdSrcMaskIndex, vrIpMcastFwdOifOutIfAddressIndex, vrIpMcastFwdOifConnectionIndex } ::= { vrIpMcastFwdOifRowStatusTable 1 } VrIpMcastFwdOifRowStatusEntry ::= SEQUENCE { vrIpMcastFwdOifRowStatus RowStatus, vrIpMcastFwdOifComponentName DisplayString, vrIpMcastFwdOifStorageType StorageType, vrIpMcastFwdOifOutIfAddressIndex IpAddress, vrIpMcastFwdOifConnectionIndex Integer32 } vrIpMcastFwdOifRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastFwdOif components. These components cannot be added nor deleted." ::= { vrIpMcastFwdOifRowStatusEntry 1 } vrIpMcastFwdOifComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastFwdOifRowStatusEntry 2 } vrIpMcastFwdOifStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastFwdOif tables." ::= { vrIpMcastFwdOifRowStatusEntry 4 } vrIpMcastFwdOifOutIfAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastFwdOif tables." ::= { vrIpMcastFwdOifRowStatusEntry 10 } vrIpMcastFwdOifConnectionIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastFwdOif tables." ::= { vrIpMcastFwdOifRowStatusEntry 11 } vrIpMcastFwdOifOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastFwdOifOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes for the InwIpOutInterface component." ::= { vrIpMcastFwdOif 10 } vrIpMcastFwdOifOperEntry OBJECT-TYPE SYNTAX VrIpMcastFwdOifOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastFwdOifOperTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastFwdGAddrIndex, vrIpMcastFwdDomainIndex, vrIpMcastFwdSrcAddrIndex, vrIpMcastFwdSrcMaskIndex, vrIpMcastFwdOifOutIfAddressIndex, vrIpMcastFwdOifConnectionIndex } ::= { vrIpMcastFwdOifOperTable 1 } VrIpMcastFwdOifOperEntry ::= SEQUENCE { vrIpMcastFwdOifIfIndex InterfaceIndex, vrIpMcastFwdOifProtocol INTEGER, vrIpMcastFwdOifAge Unsigned32, vrIpMcastFwdOifOutProtocolPortName RowPointer } vrIpMcastFwdOifIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the ifIndex value of this outgoing interface entry." ::= { vrIpMcastFwdOifOperEntry 2 } vrIpMcastFwdOifProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), netmgmt(3), dvmrp(4), mospf(5), pimSparseDense(6), cbt(7), pimSparse(8), pimDense(9), igmponly(10) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the multicast routing protocol via which this multicast forwarding outinterface entry was learned." ::= { vrIpMcastFwdOifOperEntry 3 } vrIpMcastFwdOifAge OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of seconds since this route was last updated" ::= { vrIpMcastFwdOifOperEntry 4 } vrIpMcastFwdOifOutProtocolPortName OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the name of the protocol port by which the next hop of this route should be reached." ::= { vrIpMcastFwdOifOperEntry 702 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/<string> Ip Mcast CacheStats/n -- This component represents the IP MCAST cache table on an LP. vrIpMcastCacheStats OBJECT IDENTIFIER ::= { vrIpMcast 8 } vrIpMcastCacheStatsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastCacheStatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpMcastCacheStats components." ::= { vrIpMcastCacheStats 1 } vrIpMcastCacheStatsRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastCacheStatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastCacheStats component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastCacheStatsIndex } ::= { vrIpMcastCacheStatsRowStatusTable 1 } VrIpMcastCacheStatsRowStatusEntry ::= SEQUENCE { vrIpMcastCacheStatsRowStatus RowStatus, vrIpMcastCacheStatsComponentName DisplayString, vrIpMcastCacheStatsStorageType StorageType, vrIpMcastCacheStatsIndex Integer32 } vrIpMcastCacheStatsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastCacheStats components. These components cannot be added nor deleted." ::= { vrIpMcastCacheStatsRowStatusEntry 1 } vrIpMcastCacheStatsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastCacheStatsRowStatusEntry 2 } vrIpMcastCacheStatsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastCacheStats tables." ::= { vrIpMcastCacheStatsRowStatusEntry 4 } vrIpMcastCacheStatsIndex OBJECT-TYPE SYNTAX Integer32 (0..15) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpMcastCacheStats tables." ::= { vrIpMcastCacheStatsRowStatusEntry 10 } vrIpMcastCacheStatsStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastCacheStatsStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrIpMcastCacheStats 10 } vrIpMcastCacheStatsStateEntry OBJECT-TYPE SYNTAX VrIpMcastCacheStatsStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastCacheStatsStateTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastCacheStatsIndex } ::= { vrIpMcastCacheStatsStateTable 1 } VrIpMcastCacheStatsStateEntry ::= SEQUENCE { vrIpMcastCacheStatsAdminState INTEGER, vrIpMcastCacheStatsOperationalState INTEGER, vrIpMcastCacheStatsUsageState INTEGER } vrIpMcastCacheStatsAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrIpMcastCacheStatsStateEntry 1 } vrIpMcastCacheStatsOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrIpMcastCacheStatsStateEntry 2 } vrIpMcastCacheStatsUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrIpMcastCacheStatsStateEntry 3 } vrIpMcastCacheStatsOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastCacheStatsOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group houses all the operational attributes of an Ip cache table." ::= { vrIpMcastCacheStats 11 } vrIpMcastCacheStatsOperEntry OBJECT-TYPE SYNTAX VrIpMcastCacheStatsOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastCacheStatsOperTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastCacheStatsIndex } ::= { vrIpMcastCacheStatsOperTable 1 } VrIpMcastCacheStatsOperEntry ::= SEQUENCE { vrIpMcastCacheStatsEntriesFree Unsigned32, vrIpMcastCacheStatsTotalLookups Unsigned32, vrIpMcastCacheStatsLookupMisses Counter32, vrIpMcastCacheStatsCacheTableMaxEntries Unsigned32 } vrIpMcastCacheStatsEntriesFree OBJECT-TYPE SYNTAX Unsigned32 (0..8000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is indicative of the number of free Ip cache table entries. A consistently high value for this attribute indicates that there is a resource surplus of the memory requirements for cache table. This surplus could be utilized elsewhere if needed by adjusting the cacheTableMaxEntries under the Ip component." ::= { vrIpMcastCacheStatsOperEntry 3 } vrIpMcastCacheStatsTotalLookups OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the total number of local cache lookups. It wraps around to 0 when it reaches the maximum value of 4294967295." ::= { vrIpMcastCacheStatsOperEntry 4 } vrIpMcastCacheStatsLookupMisses OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the total number of local cache lookup misses. It wraps around to 0 when it reaches the maximum value of 4294967295." ::= { vrIpMcastCacheStatsOperEntry 5 } vrIpMcastCacheStatsCacheTableMaxEntries OBJECT-TYPE SYNTAX Unsigned32 (0..8000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current maximum number of entries that can exist in the IP local cache table on each LP." ::= { vrIpMcastCacheStatsOperEntry 395 } -- Vr/<string> Ip Mcast PimSm -- The Protocol Independent Multicast Sparse Mode (PimSm) -- component represents a multicast protocol which can be used for -- efficiently routing multicast traffic to multicast groups that may -- span wide-area internets. The pimSm is referred as protocol -- independent multicast because it it not dependent on any particular -- unicast routing protocol and it is designed to support groups which -- are sparsely located. vrIpMcastPimSm OBJECT IDENTIFIER ::= { vrIpMcast 9 } vrIpMcastPimSmRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimSmRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpMcastPimSm components." ::= { vrIpMcastPimSm 1 } vrIpMcastPimSmRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastPimSmRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastPimSm component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimSmIndex } ::= { vrIpMcastPimSmRowStatusTable 1 } VrIpMcastPimSmRowStatusEntry ::= SEQUENCE { vrIpMcastPimSmRowStatus RowStatus, vrIpMcastPimSmComponentName DisplayString, vrIpMcastPimSmStorageType StorageType, vrIpMcastPimSmIndex NonReplicated } vrIpMcastPimSmRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastPimSm components. These components can be added and deleted." ::= { vrIpMcastPimSmRowStatusEntry 1 } vrIpMcastPimSmComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastPimSmRowStatusEntry 2 } vrIpMcastPimSmStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastPimSm tables." ::= { vrIpMcastPimSmRowStatusEntry 4 } vrIpMcastPimSmIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpMcastPimSm tables." ::= { vrIpMcastPimSmRowStatusEntry 10 } vrIpMcastPimSmAdminControlTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimSmAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component." ::= { vrIpMcastPimSm 10 } vrIpMcastPimSmAdminControlEntry OBJECT-TYPE SYNTAX VrIpMcastPimSmAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastPimSmAdminControlTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimSmIndex } ::= { vrIpMcastPimSmAdminControlTable 1 } VrIpMcastPimSmAdminControlEntry ::= SEQUENCE { vrIpMcastPimSmSnmpAdminStatus INTEGER } vrIpMcastPimSmSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpMcastPimSmAdminControlEntry 1 } vrIpMcastPimSmStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimSmStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrIpMcastPimSm 13 } vrIpMcastPimSmStateEntry OBJECT-TYPE SYNTAX VrIpMcastPimSmStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastPimSmStateTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimSmIndex } ::= { vrIpMcastPimSmStateTable 1 } VrIpMcastPimSmStateEntry ::= SEQUENCE { vrIpMcastPimSmAdminState INTEGER, vrIpMcastPimSmOperationalState INTEGER, vrIpMcastPimSmUsageState INTEGER } vrIpMcastPimSmAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrIpMcastPimSmStateEntry 1 } vrIpMcastPimSmOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrIpMcastPimSmStateEntry 2 } vrIpMcastPimSmUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrIpMcastPimSmStateEntry 3 } vrIpMcastPimSmOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimSmOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { vrIpMcastPimSm 14 } vrIpMcastPimSmOperStatusEntry OBJECT-TYPE SYNTAX VrIpMcastPimSmOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastPimSmOperStatusTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimSmIndex } ::= { vrIpMcastPimSmOperStatusTable 1 } VrIpMcastPimSmOperStatusEntry ::= SEQUENCE { vrIpMcastPimSmSnmpOperStatus INTEGER } vrIpMcastPimSmSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpMcastPimSmOperStatusEntry 1 } -- Vr/<string> Ip Mcast PimSm domain/n -- The Domain component represents a logical link to the Domain -- component under Mcast component. Information relevant to a -- domain are included under the PimSm Domain component. vrIpMcastPimSmDomain OBJECT IDENTIFIER ::= { vrIpMcastPimSm 2 } vrIpMcastPimSmDomainRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimSmDomainRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpMcastPimSmDomain components." ::= { vrIpMcastPimSmDomain 1 } vrIpMcastPimSmDomainRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastPimSmDomainRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastPimSmDomain component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimSmIndex, vrIpMcastPimSmDomainIndex } ::= { vrIpMcastPimSmDomainRowStatusTable 1 } VrIpMcastPimSmDomainRowStatusEntry ::= SEQUENCE { vrIpMcastPimSmDomainRowStatus RowStatus, vrIpMcastPimSmDomainComponentName DisplayString, vrIpMcastPimSmDomainStorageType StorageType, vrIpMcastPimSmDomainIndex Integer32 } vrIpMcastPimSmDomainRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastPimSmDomain components. These components can be added and deleted." ::= { vrIpMcastPimSmDomainRowStatusEntry 1 } vrIpMcastPimSmDomainComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastPimSmDomainRowStatusEntry 2 } vrIpMcastPimSmDomainStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastPimSmDomain tables." ::= { vrIpMcastPimSmDomainRowStatusEntry 4 } vrIpMcastPimSmDomainIndex OBJECT-TYPE SYNTAX Integer32 (0..3) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpMcastPimSmDomain tables." ::= { vrIpMcastPimSmDomainRowStatusEntry 10 } vrIpMcastPimSmDomainProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimSmDomainProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes of the Domain component under the PimSm component." ::= { vrIpMcastPimSmDomain 10 } vrIpMcastPimSmDomainProvEntry OBJECT-TYPE SYNTAX VrIpMcastPimSmDomainProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastPimSmDomainProvTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimSmIndex, vrIpMcastPimSmDomainIndex } ::= { vrIpMcastPimSmDomainProvTable 1 } VrIpMcastPimSmDomainProvEntry ::= SEQUENCE { vrIpMcastPimSmDomainJoinPruneInterval Unsigned32, vrIpMcastPimSmDomainSptJoinThreshold Unsigned32 } vrIpMcastPimSmDomainJoinPruneInterval OBJECT-TYPE SYNTAX Unsigned32 (5..4292967295) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the frequency at which PIM Join/Prune messages are transmitted on this PIM interface." DEFVAL { 60 } ::= { vrIpMcastPimSmDomainProvEntry 1 } vrIpMcastPimSmDomainSptJoinThreshold OBJECT-TYPE SYNTAX Unsigned32 (0 | 1) ACCESS read-write STATUS mandatory DESCRIPTION "The attribute specifies the threshold at which the last-hop router joins the shortest-path tree. If 0 is selected then the router immediately joins the shortest path tree upon receipt of the first data packet. If infinity is selected then the router never joins the shortest path tree. VALUES ( 1 = infinity )" DEFVAL { 1 } ::= { vrIpMcastPimSmDomainProvEntry 2 } vrIpMcastPimSmDomainOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimSmDomainOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the Domain component under the PimSm component." ::= { vrIpMcastPimSmDomain 11 } vrIpMcastPimSmDomainOperEntry OBJECT-TYPE SYNTAX VrIpMcastPimSmDomainOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastPimSmDomainOperTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimSmIndex, vrIpMcastPimSmDomainIndex } ::= { vrIpMcastPimSmDomainOperTable 1 } VrIpMcastPimSmDomainOperEntry ::= SEQUENCE { vrIpMcastPimSmDomainBsrAddress IpAddress, vrIpMcastPimSmDomainBsrExpiryTimer TimeTicks } vrIpMcastPimSmDomainBsrAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the IP address of the bootstrap router (BSR) for this PIM domain." ::= { vrIpMcastPimSmDomainOperEntry 1 } vrIpMcastPimSmDomainBsrExpiryTimer OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the minimum time remaining before the bootstrap router in this domain will be declared down." ::= { vrIpMcastPimSmDomainOperEntry 2 } vrIpMcastPimSmDomainStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimSmDomainStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the statistics attributes of the Domain component under the PimSm component." ::= { vrIpMcastPimSmDomain 12 } vrIpMcastPimSmDomainStatsEntry OBJECT-TYPE SYNTAX VrIpMcastPimSmDomainStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastPimSmDomainStatsTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimSmIndex, vrIpMcastPimSmDomainIndex } ::= { vrIpMcastPimSmDomainStatsTable 1 } VrIpMcastPimSmDomainStatsEntry ::= SEQUENCE { vrIpMcastPimSmDomainTxBsrMsg Counter32, vrIpMcastPimSmDomainRxBsrMsg Counter32, vrIpMcastPimSmDomainTxCRpAdvMsg Counter32, vrIpMcastPimSmDomainRxCRpAdvMsg Counter32, vrIpMcastPimSmDomainTxHelloMsg Counter32, vrIpMcastPimSmDomainRxHelloMsg Counter32, vrIpMcastPimSmDomainTxRegisterMsg Counter32, vrIpMcastPimSmDomainRxRegisterMsg Counter32, vrIpMcastPimSmDomainTxRegisterStopMsg Counter32, vrIpMcastPimSmDomainRxRegisterStopMsg Counter32, vrIpMcastPimSmDomainTxAssertMsg Counter32, vrIpMcastPimSmDomainRxAssertMsg Counter32, vrIpMcastPimSmDomainTxJPMsg Counter32, vrIpMcastPimSmDomainRxJPMsg Counter32, vrIpMcastPimSmDomainDiscardBsrMsg Counter32, vrIpMcastPimSmDomainDiscardCRpAdvMsg Counter32, vrIpMcastPimSmDomainDiscardHelloMsg Counter32, vrIpMcastPimSmDomainDiscardRegisterMsg Counter32, vrIpMcastPimSmDomainDiscardRegisterStopMsg Counter32, vrIpMcastPimSmDomainDiscardAssertMsg Counter32, vrIpMcastPimSmDomainDiscardJPMsg Counter32 } vrIpMcastPimSmDomainTxBsrMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Bootstrap Message transmitted by the bootstrap router (BSR) for this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 1 } vrIpMcastPimSmDomainRxBsrMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Bootstrap Message received by this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 2 } vrIpMcastPimSmDomainTxCRpAdvMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Candidate-RP advertisement Message transmitted by the configured CRp for this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 3 } vrIpMcastPimSmDomainRxCRpAdvMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Candidate-RP advertisement Message received by the bootstrap router (BSR) for this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 4 } vrIpMcastPimSmDomainTxHelloMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Hello Message transmitted from PimIf belonging to this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 5 } vrIpMcastPimSmDomainRxHelloMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Hello Message received from pimif belonging to this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 6 } vrIpMcastPimSmDomainTxRegisterMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Register Message transmitted by the Designated Router (DR) for this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 7 } vrIpMcastPimSmDomainRxRegisterMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Register Message received by the RP for this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 8 } vrIpMcastPimSmDomainTxRegisterStopMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the RegisterStop Message transmitted by the RP for this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 9 } vrIpMcastPimSmDomainRxRegisterStopMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the RegisterStop Message received by the Designated router (DR) for this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 10 } vrIpMcastPimSmDomainTxAssertMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the assert Message transmitted from this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 11 } vrIpMcastPimSmDomainRxAssertMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Assert Message received by this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 12 } vrIpMcastPimSmDomainTxJPMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the JP Message transmitted for this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 13 } vrIpMcastPimSmDomainRxJPMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the JP Message received by this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 14 } vrIpMcastPimSmDomainDiscardBsrMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Bootstrap Message discarded by this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 17 } vrIpMcastPimSmDomainDiscardCRpAdvMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Candidate-RP advertisement Message discarded by the bootstrap router (BSR) for this pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 18 } vrIpMcastPimSmDomainDiscardHelloMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Hello Message discarded if it is not destined for us. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 19 } vrIpMcastPimSmDomainDiscardRegisterMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Register Message discarded if we are not RP for this Pim domain. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 20 } vrIpMcastPimSmDomainDiscardRegisterStopMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the RegisterStop Message discarded. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 21 } vrIpMcastPimSmDomainDiscardAssertMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Assert Message discarded if we are not expecting it. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 22 } vrIpMcastPimSmDomainDiscardJPMsg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the JP Message discarded by this pim domain if it is not destined for us. This counter wraps to zero when the maximum value is exceeded." ::= { vrIpMcastPimSmDomainStatsEntry 23 } -- This component specifies that this router should advertise itself as a -- Candidiate RP (CRP). vrIpMcastPimSmDomainCRp OBJECT IDENTIFIER ::= { vrIpMcastPimSmDomain 2 } vrIpMcastPimSmDomainCRpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimSmDomainCRpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpMcastPimSmDomainCRp components." ::= { vrIpMcastPimSmDomainCRp 1 } vrIpMcastPimSmDomainCRpRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastPimSmDomainCRpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastPimSmDomainCRp component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimSmIndex, vrIpMcastPimSmDomainIndex, vrIpMcastPimSmDomainCRpIndex } ::= { vrIpMcastPimSmDomainCRpRowStatusTable 1 } VrIpMcastPimSmDomainCRpRowStatusEntry ::= SEQUENCE { vrIpMcastPimSmDomainCRpRowStatus RowStatus, vrIpMcastPimSmDomainCRpComponentName DisplayString, vrIpMcastPimSmDomainCRpStorageType StorageType, vrIpMcastPimSmDomainCRpIndex NonReplicated } vrIpMcastPimSmDomainCRpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastPimSmDomainCRp components. These components can be added and deleted." ::= { vrIpMcastPimSmDomainCRpRowStatusEntry 1 } vrIpMcastPimSmDomainCRpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastPimSmDomainCRpRowStatusEntry 2 } vrIpMcastPimSmDomainCRpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastPimSmDomainCRp tables." ::= { vrIpMcastPimSmDomainCRpRowStatusEntry 4 } vrIpMcastPimSmDomainCRpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpMcastPimSmDomainCRp tables." ::= { vrIpMcastPimSmDomainCRpRowStatusEntry 10 } vrIpMcastPimSmDomainCRpProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimSmDomainCRpProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group specifies all the attributes for component CandidateRendezvousPoint." ::= { vrIpMcastPimSmDomainCRp 10 } vrIpMcastPimSmDomainCRpProvEntry OBJECT-TYPE SYNTAX VrIpMcastPimSmDomainCRpProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastPimSmDomainCRpProvTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimSmIndex, vrIpMcastPimSmDomainIndex, vrIpMcastPimSmDomainCRpIndex } ::= { vrIpMcastPimSmDomainCRpProvTable 1 } VrIpMcastPimSmDomainCRpProvEntry ::= SEQUENCE { vrIpMcastPimSmDomainCRpCandidateRpAddress Link, vrIpMcastPimSmDomainCRpCandidateRpPreference INTEGER } vrIpMcastPimSmDomainCRpCandidateRpAddress OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a link to a logical interface component which specifies an IP address to be used as the local identifier in CRP advertisement messages." ::= { vrIpMcastPimSmDomainCRpProvEntry 1 } vrIpMcastPimSmDomainCRpCandidateRpPreference OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the preference value to be used in CRP advertisement messages. Lower values indicate higher preference." DEFVAL { 0 } ::= { vrIpMcastPimSmDomainCRpProvEntry 2 } -- This component specifies an IP multicast group address and mask -- which when combined identifies a group prefix for which the local -- router will advertise itself as a Candidate-RP. vrIpMcastPimSmDomainCRpGrp OBJECT IDENTIFIER ::= { vrIpMcastPimSmDomainCRp 2 } vrIpMcastPimSmDomainCRpGrpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimSmDomainCRpGrpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpMcastPimSmDomainCRpGrp components." ::= { vrIpMcastPimSmDomainCRpGrp 1 } vrIpMcastPimSmDomainCRpGrpRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastPimSmDomainCRpGrpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastPimSmDomainCRpGrp component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimSmIndex, vrIpMcastPimSmDomainIndex, vrIpMcastPimSmDomainCRpIndex, vrIpMcastPimSmDomainCRpGrpGrpAddressIndex, vrIpMcastPimSmDomainCRpGrpGrpMaskIndex } ::= { vrIpMcastPimSmDomainCRpGrpRowStatusTable 1 } VrIpMcastPimSmDomainCRpGrpRowStatusEntry ::= SEQUENCE { vrIpMcastPimSmDomainCRpGrpRowStatus RowStatus, vrIpMcastPimSmDomainCRpGrpComponentName DisplayString, vrIpMcastPimSmDomainCRpGrpStorageType StorageType, vrIpMcastPimSmDomainCRpGrpGrpAddressIndex IpAddress, vrIpMcastPimSmDomainCRpGrpGrpMaskIndex IpAddress } vrIpMcastPimSmDomainCRpGrpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastPimSmDomainCRpGrp components. These components can be added and deleted." ::= { vrIpMcastPimSmDomainCRpGrpRowStatusEntry 1 } vrIpMcastPimSmDomainCRpGrpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastPimSmDomainCRpGrpRowStatusEntry 2 } vrIpMcastPimSmDomainCRpGrpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastPimSmDomainCRpGrp tables." ::= { vrIpMcastPimSmDomainCRpGrpRowStatusEntry 4 } vrIpMcastPimSmDomainCRpGrpGrpAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastPimSmDomainCRpGrp tables." ::= { vrIpMcastPimSmDomainCRpGrpRowStatusEntry 10 } vrIpMcastPimSmDomainCRpGrpGrpMaskIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastPimSmDomainCRpGrp tables." ::= { vrIpMcastPimSmDomainCRpGrpRowStatusEntry 11 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- This component indicates the IP address of a router which -- advertises itself as a Candidate-RP. vrIpMcastPimSmDomainRpSet OBJECT IDENTIFIER ::= { vrIpMcastPimSmDomain 3 } vrIpMcastPimSmDomainRpSetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimSmDomainRpSetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpMcastPimSmDomainRpSet components." ::= { vrIpMcastPimSmDomainRpSet 1 } vrIpMcastPimSmDomainRpSetRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastPimSmDomainRpSetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastPimSmDomainRpSet component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimSmIndex, vrIpMcastPimSmDomainIndex, vrIpMcastPimSmDomainRpSetGrpAddressIndex, vrIpMcastPimSmDomainRpSetGrpMaskIndex, vrIpMcastPimSmDomainRpSetRpAddressIndex } ::= { vrIpMcastPimSmDomainRpSetRowStatusTable 1 } VrIpMcastPimSmDomainRpSetRowStatusEntry ::= SEQUENCE { vrIpMcastPimSmDomainRpSetRowStatus RowStatus, vrIpMcastPimSmDomainRpSetComponentName DisplayString, vrIpMcastPimSmDomainRpSetStorageType StorageType, vrIpMcastPimSmDomainRpSetGrpAddressIndex IpAddress, vrIpMcastPimSmDomainRpSetGrpMaskIndex IpAddress, vrIpMcastPimSmDomainRpSetRpAddressIndex IpAddress } vrIpMcastPimSmDomainRpSetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastPimSmDomainRpSet components. These components cannot be added nor deleted." ::= { vrIpMcastPimSmDomainRpSetRowStatusEntry 1 } vrIpMcastPimSmDomainRpSetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastPimSmDomainRpSetRowStatusEntry 2 } vrIpMcastPimSmDomainRpSetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastPimSmDomainRpSet tables." ::= { vrIpMcastPimSmDomainRpSetRowStatusEntry 4 } vrIpMcastPimSmDomainRpSetGrpAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastPimSmDomainRpSet tables." ::= { vrIpMcastPimSmDomainRpSetRowStatusEntry 10 } vrIpMcastPimSmDomainRpSetGrpMaskIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastPimSmDomainRpSet tables." ::= { vrIpMcastPimSmDomainRpSetRowStatusEntry 11 } vrIpMcastPimSmDomainRpSetRpAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastPimSmDomainRpSet tables." ::= { vrIpMcastPimSmDomainRpSetRowStatusEntry 12 } vrIpMcastPimSmDomainRpSetOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimSmDomainRpSetOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes for a candidate RP." ::= { vrIpMcastPimSmDomainRpSet 11 } vrIpMcastPimSmDomainRpSetOperEntry OBJECT-TYPE SYNTAX VrIpMcastPimSmDomainRpSetOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastPimSmDomainRpSetOperTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimSmIndex, vrIpMcastPimSmDomainIndex, vrIpMcastPimSmDomainRpSetGrpAddressIndex, vrIpMcastPimSmDomainRpSetGrpMaskIndex, vrIpMcastPimSmDomainRpSetRpAddressIndex } ::= { vrIpMcastPimSmDomainRpSetOperTable 1 } VrIpMcastPimSmDomainRpSetOperEntry ::= SEQUENCE { vrIpMcastPimSmDomainRpSetRpSetHoldTime Unsigned32, vrIpMcastPimSmDomainRpSetRpSetExpiryTime TimeTicks, vrIpMcastPimSmDomainRpSetRpSetPriority INTEGER } vrIpMcastPimSmDomainRpSetRpSetHoldTime OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0." ::= { vrIpMcastPimSmDomainRpSetOperEntry 1 } vrIpMcastPimSmDomainRpSetRpSetExpiryTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0." ::= { vrIpMcastPimSmDomainRpSetOperEntry 2 } vrIpMcastPimSmDomainRpSetRpSetPriority OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the priority advertised by BSR for this CRP. If the local router is the BSR, this value specifies the priority advertised by CRP." ::= { vrIpMcastPimSmDomainRpSetOperEntry 3 } -- This component specifies that this router should advertise iteself as -- a candidate bootstrap router (CBSR). vrIpMcastPimSmDomainCBsr OBJECT IDENTIFIER ::= { vrIpMcastPimSmDomain 4 } vrIpMcastPimSmDomainCBsrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimSmDomainCBsrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpMcastPimSmDomainCBsr components." ::= { vrIpMcastPimSmDomainCBsr 1 } vrIpMcastPimSmDomainCBsrRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastPimSmDomainCBsrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastPimSmDomainCBsr component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimSmIndex, vrIpMcastPimSmDomainIndex, vrIpMcastPimSmDomainCBsrIndex } ::= { vrIpMcastPimSmDomainCBsrRowStatusTable 1 } VrIpMcastPimSmDomainCBsrRowStatusEntry ::= SEQUENCE { vrIpMcastPimSmDomainCBsrRowStatus RowStatus, vrIpMcastPimSmDomainCBsrComponentName DisplayString, vrIpMcastPimSmDomainCBsrStorageType StorageType, vrIpMcastPimSmDomainCBsrIndex NonReplicated } vrIpMcastPimSmDomainCBsrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastPimSmDomainCBsr components. These components can be added and deleted." ::= { vrIpMcastPimSmDomainCBsrRowStatusEntry 1 } vrIpMcastPimSmDomainCBsrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastPimSmDomainCBsrRowStatusEntry 2 } vrIpMcastPimSmDomainCBsrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastPimSmDomainCBsr tables." ::= { vrIpMcastPimSmDomainCBsrRowStatusEntry 4 } vrIpMcastPimSmDomainCBsrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpMcastPimSmDomainCBsr tables." ::= { vrIpMcastPimSmDomainCBsrRowStatusEntry 10 } vrIpMcastPimSmDomainCBsrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimSmDomainCBsrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains all the provisionable attributes for component CandidateBootstrapRouter." ::= { vrIpMcastPimSmDomainCBsr 10 } vrIpMcastPimSmDomainCBsrProvEntry OBJECT-TYPE SYNTAX VrIpMcastPimSmDomainCBsrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastPimSmDomainCBsrProvTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimSmIndex, vrIpMcastPimSmDomainIndex, vrIpMcastPimSmDomainCBsrIndex } ::= { vrIpMcastPimSmDomainCBsrProvTable 1 } VrIpMcastPimSmDomainCBsrProvEntry ::= SEQUENCE { vrIpMcastPimSmDomainCBsrCandidateBsrAddress Link, vrIpMcastPimSmDomainCBsrCandidateBsrPreference INTEGER } vrIpMcastPimSmDomainCBsrCandidateBsrAddress OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a link to a logical interface component which specifies an IP address to use as the local system identifier in bootstrap messages." ::= { vrIpMcastPimSmDomainCBsrProvEntry 1 } vrIpMcastPimSmDomainCBsrCandidateBsrPreference OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the preference value used in bootstrap messages. Higher values indicate higher priority." DEFVAL { 0 } ::= { vrIpMcastPimSmDomainCBsrProvEntry 2 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/<string. Ip Mcast NeighborEntry/<Ip Address>, <Decimal> -- This component represent a neighbouring PIM-enabled router. vrIpMcastPimNbr OBJECT IDENTIFIER ::= { vrIpMcast 10 } vrIpMcastPimNbrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimNbrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpMcastPimNbr components." ::= { vrIpMcastPimNbr 1 } vrIpMcastPimNbrRowStatusEntry OBJECT-TYPE SYNTAX VrIpMcastPimNbrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpMcastPimNbr component." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimNbrNbrAddressIndex, vrIpMcastPimNbrDomainIndex } ::= { vrIpMcastPimNbrRowStatusTable 1 } VrIpMcastPimNbrRowStatusEntry ::= SEQUENCE { vrIpMcastPimNbrRowStatus RowStatus, vrIpMcastPimNbrComponentName DisplayString, vrIpMcastPimNbrStorageType StorageType, vrIpMcastPimNbrNbrAddressIndex IpAddress, vrIpMcastPimNbrDomainIndex Integer32 } vrIpMcastPimNbrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpMcastPimNbr components. These components cannot be added nor deleted." ::= { vrIpMcastPimNbrRowStatusEntry 1 } vrIpMcastPimNbrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpMcastPimNbrRowStatusEntry 2 } vrIpMcastPimNbrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpMcastPimNbr tables." ::= { vrIpMcastPimNbrRowStatusEntry 4 } vrIpMcastPimNbrNbrAddressIndex OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastPimNbr tables." ::= { vrIpMcastPimNbrRowStatusEntry 10 } vrIpMcastPimNbrDomainIndex OBJECT-TYPE SYNTAX Integer32 (0..3) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpMcastPimNbr tables." ::= { vrIpMcastPimNbrRowStatusEntry 11 } vrIpMcastPimNbrOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpMcastPimNbrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of the PimNeighborEntry componnent." ::= { vrIpMcastPimNbr 10 } vrIpMcastPimNbrOperEntry OBJECT-TYPE SYNTAX VrIpMcastPimNbrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpMcastPimNbrOperTable." INDEX { vrIndex, vrIpIndex, vrIpMcastIndex, vrIpMcastPimNbrNbrAddressIndex, vrIpMcastPimNbrDomainIndex } ::= { vrIpMcastPimNbrOperTable 1 } VrIpMcastPimNbrOperEntry ::= SEQUENCE { vrIpMcastPimNbrIfIndex InterfaceIndex, vrIpMcastPimNbrUpTime TimeTicks, vrIpMcastPimNbrExpiryTimer TimeTicks } vrIpMcastPimNbrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the value of ifIndex for the interface used to reach this PIM neighbor." ::= { vrIpMcastPimNbrOperEntry 1 } vrIpMcastPimNbrUpTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the time since this PIM neighbor became a neighbor of this local router." ::= { vrIpMcastPimNbrOperEntry 2 } vrIpMcastPimNbrExpiryTimer OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the minimum time remaining before this PIM neighbor will be aged out." ::= { vrIpMcastPimNbrOperEntry 3 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { vrIpRipGenerateDiscardRoute, -- vrIpStaticRowStatus, -- vrIpRipImportNetRowStatus, -- vrIpBootpAdminState, -- vrIpOspfExportRipNeighbor, -- vrIpFwdStorageType, -- vrIpRipImportStorageType, -- vrIpOutRequests, -- vrIpCacheAdminState, -- vrIpStaticRouteNhMetric, -- vrIpStaticDiscardComponentName, -- vrIpArpHostEncap, -- vrIpBootpPpERowStatus, -- vrPpIpPortLogicalIfLinkToPimSmCandidateBsr, -- vrIpCacheCacheTableMaxEntries, -- vrIpMcastPimSmDomainTxHelloMsg, -- vrIpNsApplyStorageType, -- vrPpIpPortLogicalIfIgmpIfVersion, -- vrIpEgpInErrorMsgs, -- vrIpEgpNbrDefaultRouteMetric, -- vrPpIpPortLogicalIfOspfIfTOSTosMetric, -- vrPpIpPortLogicalIfOspfIfRtrPriority, -- vrIpEgpNbrOutErrorMsgs, -- vrPpIpPortLogicalIfLinkToPimSmCandidateRp, -- vrPpIpPortLogicalIfOspfIfNbrOptions, -- vrIpOspfExtLsdbAdvertisement, -- vrIpMcastSnmpAdminStatus, -- vrIpForwarding, -- vrIpNsApplyIpAddress2, -- vrPpIpPortOperArpStatus, -- vrIpMcastPgLinkToPolicyUserValue, -- vrPpIpPortBootpPAddrValue, -- vrIpMcastPimSmDomainRxAssertMsg, -- vrPpIpPortLogicalIfRipIfIfTriggeredUpdates, -- vrIpBootpPpEInReplies, -- vrIpArpDynHostNcPhysAddress, -- vrIpMcastIgmpUsageState, -- vrIpRipExportNetIpMask, -- vrIpCacheComponentName, -- vrIpRipSnmpOperStatus, -- vrIpTunnelStorageType, -- vrIpBootpStorageType, -- vrPpIpPortArpNoLearn, -- vrPpIpPortDirectedBroadcast, -- vrIpMcastIgmpGcStorageType, -- vrIpOspfTosSupport, -- vrIpIfPPName, -- vrIpOspfRxNewLsas, -- vrIpCosPolicyAssignment, -- vrPpIpPortCosPolicyAssignment, -- vrIpArpHostStorageType, -- vrIpUdpInErrors, -- vrIpFragCreates, -- vrIpOspfComponentName, -- vrPpIpPortRelayAddressCount, -- vrIpMcastCacheStatsStorageType, -- vrIpOspfExportRipInterface, -- vrIpMcastPimSmDomainCRpCandidateRpAddress, -- vrIpNsApplyDirection, -- vrIpFwdProtocolPortName, -- vrIpOspfStubRowStatus, -- vrIpMcastFwdInProtocolPortName, -- vrIpOspfStubStorageType, -- vrIpOspfExternLsaCount, -- vrIpIcmpInAddrMaskReps, -- vrIpUdpListenEntryRowStatus, -- vrIpMcastPimSmDomainRxCRpAdvMsg, -- vrIpMcastPimSmDomainCRpGrpComponentName, -- vrIpTcpPassiveOpens, -- vrPpIpPortLogicalIfOspfIfRetransInterval, -- vrIpArpHostComponentName, -- vrPpIpPortLogicalIfLinkToMulStaticGpRowStatus, -- vrPpIpPortProxyArpStatus, -- vrIpEgpStorageType, -- vrIpMcastPimSmDomainRpSetComponentName, -- vrIpRipRipTimeout, -- vrPpIpPortLogicalIfRipIfIfBadPacketRcv, -- vrIpRipRowStatus, -- vrIpArpDynHostPermanentVirtualCircuitNumber, -- vrIpRipSnmpAdminStatus, -- vrIpIcmpOutMsgs, -- vrPpIpPortLogicalIfRipIfStorageType, -- vrIpOspfStubAdvertiseDefault, -- vrPpIpPortLogicalIfOspfIfDesignatedRouter, -- vrPpIpPortLogicalIfOspfIfTOSStorageType, -- vrIpMcastStaticRouteStorageType, -- vrIpEgpNbrInErrors, -- vrIpMcastCacheStatsCacheTableMaxEntries, -- vrIpBootpOperationalState, -- vrPpIpPortLogicalIfStorageType, -- vrIpMcastDomainProtocolActive, -- vrIpOspfVirtIfRetransInterval, -- vrIpBootpPpEOutReplies, -- vrIpMcastFwdReversePathForwardingNeighbor, -- vrIpRipExportProtocol, -- vrIpCacheRowStatus, -- vrIpOspfExportComponentName, -- vrPpIpPortNsOutgoingFilter, -- vrPpIpPortLogicalIfOspfIfNbrRtrId, -- vrPpIpPortLogicalIfNetMask, -- vrIpRipImportNetIpAddress, -- vrPpIpPortLanModel, -- vrIpNsApplyIpMask2, -- vrIpIcmpInRtrAdvs, -- vrIpUdpRowStatus, -- vrIpRipOperationalState, -- vrIpInAddrErrors, -- vrIpIfNcHardwareAddress, -- vrIpMcastFwdOifIfIndex, -- vrIpFwdMetric, -- vrPpIpPortLogicalIfBroadcastAddress, -- vrIpInReceives, -- vrIpEgpExportOspfTag, -- vrPpIpPortLogicalIfRipIfNetworkRouteStatus, -- vrIpOspfNbrPriority, -- vrIpEgpExportNetRowStatus, -- vrIpIcmpInTimeExcds, -- vrIpMcastStaticRowStatus, -- vrIpOspfGenerateDefaultRouteMetric, -- vrIpEgpExportStorageType, -- vrPpIpPortLogicalIfOspfIfMetric, -- vrIpRipExportRowStatus, -- vrIpTcpOutRsts, -- vrPpIpPortLogicalIfIgmpIfQuerierExpiryTime, -- vrIpMcastPimSmDomainTxRegisterStopMsg, -- vrIpOspfExtLsdbComponentName, -- vrPpIpPortLogicalIfIgmpIfRowStatus, -- vrPpIpPortLogicalIfOspfIfNbrComponentName, -- vrIpOspfVirtIfRtrDeadInterval, -- vrIpOspfVirtNbrStorageType, -- vrIpIcmpInRedirects, -- vrIpOspfStubComponentName, -- vrIpRdbStorageType, -- vrIpMcastPimNbrStorageType, -- vrIpTunnelSepSourceAddress, -- vrIpArpDynHostMaxTxUnit, -- vrIpTcpRowStatus, -- vrIpOspfAreaStorageType, -- vrPpIpPortBootpPComponentName, -- vrIpRipImportNetIpMask, -- vrIpStorageType, -- vrPpIpPortStorageType, -- vrIpMcastDomainStorageType, -- vrIpMcastPimSmDomainComponentName, -- vrIpEgpNbrRowStatus, -- vrPpIpPortMulticastStatus, -- vrIpMcastStaticOperationalState, -- vrIpRipExportRipInterface, -- vrIpOspfUsageState, -- vrIpCacheOperationalState, -- vrIpStaticRouteNhComponentName, -- vrPpIpPortNsStorageType, -- vrIpTunnelSepStorageType, -- vrPpIpPortLogicalIfRipIfNbrRowStatus, -- vrIpOspfNbrStorageType, -- vrIpMcastPimSmSnmpOperStatus, -- vrIpCacheTotalLookups, -- vrIpAdminState, -- vrPpIpPortAdminState, -- vrIpMcastPimSmDomainCBsrCandidateBsrPreference, -- vrPpIpPortLogicalIfOspfIfNbrState, -- vrIpIfComponentName, -- vrIpOspfHostRowStatus, -- vrPpIpPortBootpPSnmpOperStatus, -- vrIpNsComponentName, -- vrIpFwdNextHopAs, -- vrIpMcastPgGrpStorageType, -- vrPpIpPortRelayBcCount, -- vrIpMcastPimSmDomainTxAssertMsg, -- vrIpTunnelSepLinkToProtocolPort, -- vrIpEgpOutErrorMsgs, -- vrIpEgpDefaultPollInterval, -- vrIpMcastAdminState, -- vrIpIcmpOutAddrMaskReps, -- vrIpOspfMigrateRip, -- vrIpTcpAttemptFails, -- vrIpOspfExportTag, -- vrPpIpPortLogicalIfPimSmIfStorageType, -- vrIpReasmReqds, -- vrIpRdbAge, -- vrIpMcastPimSmDomainCRpComponentName, -- vrIpOspfLsdbRowStatus, -- vrIpUdpNoPorts, -- vrIpNsApplyRowStatus, -- vrIpFwdIfIndex, -- vrIpOspfExtLsdbLimit, -- vrIpOspfHostComponentName, -- vrIpIcmpOutTimeExcds, -- vrIpBootpPpEInRequests, -- vrIpArpAutoRefresh, -- vrPpIpPortLogicalIfRipIfRowStatus, -- vrIpIcmpOutErrors, -- vrIpMcastPimSmRowStatus, -- vrIpArpRowStatus, -- vrIpMcastPimSmSnmpAdminStatus, -- vrIpBootpRowStatus, -- vrIpFwdProtocol, -- vrIpCacheLookupMisses, -- vrIpReasmFails, -- vrIpTunnelUsageState, -- vrIpMcastStorageType, -- vrPpIpPortSourceRouteEndStationSupport, -- vrIpOspfVirtNbrComponentName, -- vrPpIpPortLogicalIfOspfIfHelloInterval, -- vrIpTcpInErrs, -- vrIpRipExportNetComponentName, -- vrIpInHdrErrors, -- vrIpNsApplyIpMask1, -- vrIpMcastPimSmDomainRpSetRpSetExpiryTime, -- vrIpEgpComponentName, -- vrIpTunnelSepComponentName, -- vrIpTcpInSegs, -- vrIpEgpExportRipNeighbor, -- vrIpEgpImportNetRowStatus, -- vrIpEgpExportNetIpAddress, -- vrIpEgpImportStorageType, -- vrIpEgpDefaultHelloInterval, -- vrIpFwdRowStatus, -- vrIpRipImportRowStatus, -- vrIpOspfAggregateEffect, -- vrIpMcastCacheStatsUsageState, -- vrIpIcmpInEchos, -- vrPpIpPortLogicalIfRipIfIfConfReceive, -- vrPpIpPortLogicalIfLinkDestinationAddress, -- vrIpRipExportEgpAsId, -- vrPpIpPortBootpPUsageState, -- vrIpEgpNbrStateUps, -- vrIpMcastIgmpComponentName, -- vrIpIcmpOutTimestamps, -- vrIpTcpActiveOpens, -- vrIpFragOks, -- vrIpOspfExtLsdbChecksum, -- vrIpOspfVirtNbrExchangeStatus, -- vrIpArpHostPhysAddress, -- vrIpEgpInErrors, -- vrIpMcastFwdRowStatus, -- vrIpStaticRoutePreferredOver, -- vrIpInDiscards, -- vrPpIpPortOperCosPolicyAssignment, -- vrIpStaticRouteStorageType, -- vrIpEgpNbrOutErrors, -- vrIpMcastFwdOifProtocol, -- vrIpMcastDomainRowStatus, -- vrIpOspfExportExtLsaMetricType, -- vrIpRelayBCComponentName, -- vrIpRelayBCPortRelayBcUdpCount, -- vrIpForwDatagrams, -- vrIpOspfVirtNbrEvents, -- vrIpStaticDiscardStorageType, -- vrIpInDelivers, -- vrIpEgpNbrMode, -- vrIpOspfStubMetric, -- vrIpEgpInMsgs, -- vrIpMcastFwdFlags, -- vrIpOspfNbrExchangeStatus, -- vrPpIpPortMcastPolicyAssignment, -- vrPpIpPortLogicalIfRipIfIfBadRouteRcv, -- vrIpEgpNbrOutMsgs, -- vrIpMcastPimSmDomainJoinPruneInterval, -- vrIpMcastPimSmDomainDiscardAssertMsg, -- vrIpMcastPimSmDomainRpSetRpSetHoldTime, -- vrIpMcastCacheStatsComponentName, -- vrIpArpHostRowStatus, -- vrIpOspfVirtIfAuthKey, -- vrIpRipExportBgpAsId, -- vrIpCacheUsageState, -- vrIpMcastIgmpGcVersion1HostTimer, -- vrPpIpPortLogicalIfOspfIfComponentName, -- vrIpOspfNbrEvents, -- vrIpNsLastFilter, -- vrPpIpPortBootpPInReplyErrors, -- vrPpIpPortLogicalIfRipIfAcceptDefault, -- vrPpIpPortRelayAddress, -- vrIpOspfVirtNbrLsRetransQlen, -- vrIpMcastCacheStatsAdminState, -- vrIpFwdComponentName, -- vrIpMcastPimSmDomainRxJPMsg, -- vrIpIcmpOutRedirects, -- vrIpCacheEntriesFree, -- vrIpIcmpInAddrMasks, -- vrIpMcastIgmpGcExpiryTime, -- vrIpArpDynHostEncapsulationType, -- vrIpMcastPimSmDomainDiscardCRpAdvMsg, -- vrIpRelayBCRelayNdCount, -- vrIpEgpRowStatus, -- vrIpEgpSnmpAdminStatus, -- vrPpIpPortEncap, -- vrIpOspfAggregateStorageType, -- vrIpOspfVirtIfComponentName, -- vrIpOspfAreaAuthType, -- vrIpOspfStorageType, -- vrPpIpPortLogicalIfRipIfSnmpAdminStatus, -- vrIpMcastPimSmDomainTxRegisterMsg, -- vrIpOspfAreaAsBdrRtrCount, -- vrIpOspfVirtNbrNbrIpAddress, -- vrPpIpPortLogicalIfOspfIfTOSRowStatus, -- vrIpNsApplyFilter, -- vrPpIpPortLogicalIfOspfIfPollInterval, -- vrPpIpPortLogicalIfOspfIfState, -- vrIpStaticComponentName, -- vrIpRipImportNetComponentName, -- vrIpArpDynHostComponentName, -- vrPpIpPortLogicalIfRowStatus, -- vrIpEgpExportProtocol, -- vrIpEgpNbrAsId, -- vrIpMcastPimSmDomainCRpGrpStorageType, -- vrIpMcastPimSmDomainBsrExpiryTimer, -- vrIpUdpInDatagrams, -- vrIpRipExportExportMetric, -- vrIpSnmpOperStatus, -- vrIpEgpImportNetIpAddress, -- vrIpOspfAdminState, -- vrIpEgpOperationalState, -- vrIpMcastFwdOifRowStatus, -- vrIpRipExportAdvertiseStatus, -- vrIpMcastPimSmDomainCBsrCandidateBsrAddress, -- vrPpIpPortBootpPRelayForwardStatus, -- vrIpMcastStaticComponentName, -- vrIpMcastPimSmDomainRowStatus, -- vrIpOspfVirtIfState, -- vrIpMcastPimSmDomainTxBsrMsg, -- vrIpTcpTcpEntryRowStatus, -- vrIpTcpTcpEntryStorageType, -- vrPpIpPortOperMulticastStatus, -- vrPpIpPortLogicalIfOspfIfNbrPriority, -- vrIpMcastPimSmDomainCRpCandidateRpPreference, -- vrIpEgpExportAdvertiseStatus, -- vrPpIpPortUsageState, -- vrIpRelayBCRelayNdStatus, -- vrIpOspfNbrPermanence, -- vrPpIpPortAllowMcastMacDest, -- vrIpOspfExportStorageType, -- vrPpIpPortBootpPInRequestErrors, -- vrIpOspfVirtNbrRowStatus, -- vrIpOspfAreaBdrRtrStatus, -- vrIpRdbRowStatus, -- vrIpMcastStaticAdminState, -- vrIpRelayBCPortComponentName, -- vrIpRelayBCRelayStatus, -- vrIpOspfAreaRowStatus, -- vrIpBootpHopDiscardThreshold, -- vrIpRowStatus, -- vrPpIpPortRowStatus, -- vrIpIcmpOutEchos, -- vrIpSnmpAdminStatus, -- vrPpIpPortSnmpAdminStatus, -- vrIpEgpExportRipInterface, -- vrIpTunnelAdminState, -- vrIpOspfAreaAreaSummary, -- vrPpIpPortArpStatus, -- vrPpIpPortNsRowStatus, -- vrIpTunnelOperationalState, -- vrIpBootpPpEOutRequests, -- vrIpTcpOutSegs, -- vrIpOspfNbrRowStatus, -- vrIpOspfAggregateComponentName, -- vrIpOspfExtLsdbStorageType, -- vrIpArpComponentName, -- vrPpIpPortLogicalIfOspfIfNbrStorageType, -- vrIpMcastRowStatus, -- vrIpUdpListenEntryComponentName, -- vrIpOspfMulticastForward, -- vrIpOspfHostStorageType, -- vrIpTcpRetransSegs, -- vrIpEgpNbrHelloInterval, -- vrPpIpPortSendRedirect, -- vrIpMcastPimSmAdminState, -- vrIpMcastPimSmOperationalState, -- vrPpIpPortOperEncap, -- vrIpOperationalState, -- vrPpIpPortOperationalState, -- vrIpBootpPpEInRequestErrors, -- vrIpIcmpOutRtrAdvs, -- vrIpOspfLsdbAdvertisement, -- vrIpMcastComponentName, -- vrPpIpPortLogicalIfIgmpIfGroups, -- vrIpEgpOutErrors, -- vrPpIpPortBootpPStorageType, -- vrIpMcastPimSmDomainRxBsrMsg, -- vrPpIpPortLogicalIfPimSmIfRowStatus, -- vrIpOutDiscards, -- vrIpTcpRToAlgorithm, -- vrIpArpStorageType, -- vrIpTunnelComponentName, -- vrIpRipImportImportMetric, -- vrPpIpPortBootpPAdminState, -- vrIpMcastPimSmUsageState, -- vrIpMcastOperationalState, -- vrIpOspfHostAreaId, -- vrIpIfStorageType, -- vrIpMcastPgLinkToPolicyUserRowStatus, -- vrPpIpPortBootpPAddrRowStatus, -- vrIpMcastFwdStorageType, -- vrIpRipExportComponentName, -- vrIpIcmpComponentName, -- vrIpStaticRouteNhStorageType, -- vrIpEgpOutMsgs, -- vrIpArpHostMaxTxUnit, -- vrIpIcmpInRtrSolicits, -- vrIpUdpComponentName, -- vrIpMcastPimNbrExpiryTimer, -- vrPpIpPortMediaType, -- vrPpIpPortLogicalIfOspfIfAuthKey, -- vrIpMcastStaticUsageState, -- vrIpOspfExtLsdbAge, -- vrPpIpPortLogicalIfOspfIfTransitDelay, -- vrIpDefaultTtl, -- vrIpEgpExportNetComponentName, -- vrPpIpPortLogicalIfIgmpIfQueryMaxRespTime, -- vrIpUdpOutDatagrams, -- vrIpIfBroadcastAddress, -- vrIpMcastPimSmDomainCRpStorageType, -- vrIpMcastPimSmDomainCBsrRowStatus, -- vrPpIpPortLogicalIfOspfIfRtrDeadInterval, -- vrIpMcastPimSmDomainSptJoinThreshold, -- vrIpNsRowStatus, -- vrIpMcastUsageState, -- vrPpIpPortLogicalIfIgmpIfComponentName, -- vrPpIpPortBootpPBootpLogicalInterface, -- vrPpIpPortLogicalIfIgmpIfJoins, -- vrIpEgpImportRowStatus, -- vrIpTunnelSepRowStatus, -- vrIpEgpExportExportMetric, -- vrIpMcastPimSmDomainDiscardRegisterStopMsg, -- vrIpOspfVersionNumber, -- vrIpMcastPimSmDomainCBsrStorageType, -- vrIpMcastIgmpGcLastReporter, -- vrIpIcmpOutAddrMasks, -- vrPpIpPortNsIncomingFilter, -- vrIpMcastStaticRouteOifsValue, -- vrIpStaticUsageState, -- vrPpIpPortLogicalIfRipIfFlashUpdateFlag, -- vrIpOspfExportNetListRowStatus, -- vrIpOspfNbrNbmaNbrStatus, -- vrIpRipExportOutInterface, -- vrPpIpPortLogicalIfRipIfMetric, -- vrIpEgpNbrComponentName, -- vrIpOutNoRoutes, -- vrIpMcastPimSmDomainCRpGrpRowStatus, -- vrPpIpPortLogicalIfRipIfDefaultRouteMetric, -- vrPpIpPortAssignedQos, -- vrIpRipExportNetStorageType, -- vrIpEgpImportNbrAsId, -- vrPpIpPortLogicalIfRipIfNbrComponentName, -- vrPpIpPortLinkModel, -- vrIpBootpPpEInReplyErrors, -- vrIpArpDynHostType, -- vrIpStaticRouteRowStatus, -- vrIpEgpAsId, -- vrIpMcastStaticStorageType, -- vrIpMcastDomainComponentName, -- vrIpOspfVirtIfTransitDelay, -- vrPpIpPortSnmpOperStatus, -- vrPpIpPortLogicalIfLinkToMulStaticGpValue, -- vrIpFwdAge, -- vrIpTunnelRowStatus, -- vrIpNsApplyIpAddress1, -- vrIpStaticDiscardRowStatus, -- vrIpRipComponentName, -- vrIpBootpPpEStatus, -- vrIpMcastPimSmDomainDiscardJPMsg, -- vrIpArpDynHostStorageType, -- vrIpRipUsageState, -- vrPpIpPortIcmpMaskReply, -- vrIpMcastStaticRouteRowStatus, -- vrIpOspfSnmpOperStatus, -- vrIpEgpNbrPollInterval, -- vrPpIpPortLogicalIfOspfIfNbrExchangeStatus, -- vrIpIcmpInTimestampReps, -- vrIpTunnelSepPathMtu, -- vrIpOspfAreaSpfRuns, -- vrIpCtsValue, -- vrIpIfInterfaceMask, -- vrIpOspfLsdbComponentName, -- vrIpMcastPimSmDomainRxRegisterStopMsg, -- vrIpNsApplyComponentName, -- vrIpArpHostOperEncap, -- vrIpIcmpInEchoReps, -- vrIpMcastIgmpAdminState, -- vrPpIpPortLogicalIfIgmpIfWrongVersionQuery, -- vrIpRelayBCStorageType, -- vrIpTcpRToMax, -- vrIpEgpNbrState, -- vrPpIpPortLogicalIfOspfIfNbrEvents, -- vrIpMcastPimSmComponentName, -- vrIpEgpMaxBufferSize, -- vrIpRdbMetric, -- vrIpMcastPgGrpComponentName, -- vrPpIpPortLogicalIfOspfIfMulticastForwarding, -- vrIpMcastPimSmDomainRxHelloMsg, -- vrIpStaticRouteComponentName, -- vrPpIpPortLogicalIfPimSmIfDesignatedRouter, -- vrIpEgpNbrInMsgs, -- vrIpTcpTcpEntryState, -- vrIpNsLocalOutFilter, -- vrIpOspfLsdbSequence, -- vrIpOspfAggregateRowStatus, -- vrIpIcmpStorageType, -- vrIpReasmOks, -- vrIpOspfExportBgpAsId, -- vrIpOspfRowStatus, -- vrIpOspfSnmpAdminStatus, -- vrPpIpPortLogicalIfOspfIfStorageType, -- vrIpEgpImportNetComponentName, -- vrIpRipImportInterface, -- vrIpEgpMaxNatNets, -- vrPpIpPortLogicalIfOspfIfNbrLsRetransQlen, -- vrIpMcastPgRowStatus, -- vrIpEgpExportOutAutonomousSystem, -- vrIpRipImportComponentName, -- vrIpOspfExportNetListStorageType, -- vrPpIpPortBootpPInReplies, -- vrIpOspfLsdbAge, -- vrIpMcastFwdAge, -- vrIpBootpUsageState, -- vrIpOspfExportProtocol, -- vrIpOspfVirtIfEvents, -- vrIpIcmpOutSrcQuenchs, -- vrIpBootpPpEComponentName, -- vrIpEgpSnmpOperStatus, -- vrIpRipMigrateRip, -- vrIpMcastPimSmDomainDiscardBsrMsg, -- vrIpOspfVirtIfStorageType, -- vrPpIpPortLogicalIfIgmpIfQuerier, -- vrIpMcastFwdComponentName, -- vrIpOspfOriginateNewLsas, -- vrPpIpPortLogicalIfOspfIfAreaId, -- vrIpRelayBCPortRowStatus, -- vrIpOspfRouterId, -- vrIpOspfVirtNbrOptions, -- vrIpBootpSnmpOperStatus, -- vrIpRipImportUsageFlag, -- vrIpStaticStorageType, -- vrIpRipImportNetStorageType, -- vrIpArpHostPermanentVirtualCircuitNumber, -- vrIpTunnelSepEncapType, -- vrIpIcmpInSrcQuenchs, -- vrIpTcpComponentName, -- vrPpIpPortOperMtu, -- vrIpOspfExportRowStatus, -- vrIpBootpPpEStorageType, -- vrIpOspfExportAdvertiseStatus, -- vrIpRipRouteChangesMade, -- vrIpEgpNbrEventTrigger, -- vrIpMcastPgGrpRowStatus, -- vrIpMcastIgmpGcComponentName, -- vrIpStaticAdminState, -- vrIpArpDynHostRowStatus, -- vrIpOspfNbrOptions, -- vrIpMcastIgmpStorageType, -- vrIpRelayBCPortStorageType, -- vrPpIpPortRelayBroadcast, -- vrIpMcastPimSmDomainRpSetRowStatus, -- vrIpTunnelSepIfIndex, -- vrIpMcastCtsValue, -- vrIpOspfExportNetListIpMask, -- vrIpTunnelSepDestinationAddress, -- vrPpIpPortBootpPInRequests, -- vrIpMcastFwdOifOutProtocolPortName, -- vrIpOspfAreaImportAsExtern, -- vrIpMcastPimSmDomainDiscardHelloMsg, -- vrIpMcastPimSmDomainDiscardRegisterMsg, -- vrIpOspfExtLsdbRowStatus, -- vrPpIpPortLogicalIfOspfIfNbrRowStatus, -- vrIpMcastPimSmDomainRpSetStorageType, -- vrIpMcastPimSmDomainBsrAddress, -- vrIpMcastPimSmDomainRxRegisterMsg, -- vrIpEgpExportInEgpAsId, -- vrIpMcastCacheStatsRowStatus, -- vrIpOspfAreaLsaCount, -- vrIpOspfLsdbChecksum, -- vrPpIpPortBootpPRowStatus, -- vrIpIcmpOutEchoReps, -- vrPpIpPortBootpPSnmpAdminStatus, -- vrIpArpHostOperMaxTxUnit, -- vrIpUdpListenEntryStorageType, -- vrPpIpPortLogicalIfRipIfComponentName, -- vrIpEgpNbrDefaultMetric, -- vrIpOspfExternLsaChecksumSum, -- vrIpMcastPimNbrUpTime, -- vrPpIpPortLogicalIfOspfIfTOSComponentName, -- vrIpIcmpOutTimestampReps, -- vrPpIpPortLogicalIfComponentName, -- vrIpIfStatus, -- vrIpMcastPimSmDomainStorageType, -- vrPpIpPortLogicalIfOspfIfNbrPermanance, -- vrIpMcastPimNbrComponentName, -- vrIpEgpImportUsageFlag, -- vrIpIfRowStatus, -- vrIpNsLocalInFilter, -- vrIpMcastPimSmDomainTxJPMsg, -- vrIpMcastCacheStatsOperationalState, -- vrIpEgpExportRowStatus, -- vrIpStaticRouteNhRowStatus, -- vrIpInUnknownProtos, -- vrPpIpPortBootpPOperationalState, -- vrPpIpPortLogicalIfPimSmIfHelloInterval, -- vrIpRipStorageType, -- vrIpMcastCacheStatsTotalLookups, -- vrIpRipExportNetIpAddress, -- vrIpStaticOperationalState, -- vrIpIfMtu, -- vrIpIcmpOutDestUnreachs, -- vrIpTcpTcpEntryComponentName, -- vrIpEgpNbrInErrorMsgs, -- vrIpIfHardwareAddress, -- vrIpEgpExportComponentName, -- vrIpMcastPgStorageType, -- vrPpIpPortLogicalIfIgmpIfQueryInterval, -- vrPpIpPortLogicalIfOspfIfEvents, -- vrIpRipAdminState, -- vrIpReasmTimeOut, -- vrIpTcpEstabResets, -- vrIpOspfExportNetListIpAddress, -- vrIpMcastIgmpSnmpOperStatus, -- vrIpMcastIgmpGcUpTime, -- vrIpRdbComponentName, -- vrIpIcmpInParmProbs, -- vrIpRipGarbageCollectTimer, -- vrIpUdpStorageType, -- vrIpOspfAreaComponentName, -- vrIpComponentName, -- vrPpIpPortComponentName, -- vrPpIpPortLogicalIfRipIfIfConfSend, -- vrIpIcmpOutRtrSolicits, -- vrIpRipRfc1058MetricUsage, -- vrIpOspfNbrRtrId, -- vrIpOspfExportEgpAsId, -- vrIpEgpExportNetStorageType, -- vrIpRipExportOspfTag, -- vrIpMcastIgmpRowStatus, -- vrIpCacheStorageType, -- vrIpRipExportNetRowStatus, -- vrIpRoutingDiscards, -- vrPpIpPortNsComponentName, -- vrIpRipExportStorageType, -- vrIpMcastCacheStatsLookupMisses, -- vrIpOspfNbrComponentName, -- vrIpTunnelSepIfAdminStatus, -- vrIpOspfExportBgpPeerIp, -- vrIpEgpNbrGenerateDefaultRoute, -- vrPpIpPortLogicalIfIgmpIfStorageType, -- vrIpNsFirstFilter, -- vrIpIfMediaType, -- vrIpTcpMaxConn, -- vrIpOspfVirtNbrState, -- vrPpIpPortBootpPOutReplies, -- vrIpIcmpOutParmProbs, -- vrIpFragFails, -- vrIpTcpStorageType, -- vrIpFwdType, -- vrIpMcastPgComponentName, -- vrIpEgpUsageState, -- vrIpArpDynHostPhysAddress, -- vrIpOspfNbrLsRetransQlen, -- vrIpArpAutoRefreshTimeout, -- vrIpEgpNbrStorageType, -- vrIpIcmpInMsgs, -- vrIpMcastPimSmDomainCRpRowStatus, -- vrIpIcmpInTimestamps, -- vrIpMcastFwdOifStorageType, -- vrIpBootpComponentName, -- vrPpIpPortLogicalIfPimSmIfComponentName, -- vrPpIpPortLogicalIfRipIfNbrStorageType, -- vrPpIpPortLogicalIfOspfIfIfType, -- vrIpMcastFwdOifComponentName, -- vrIpOspfNbrState, -- vrIpOspfAsBdrRtrStatus, -- vrIpMcastPimNbrRowStatus, -- vrIpMcastIgmpSnmpAdminStatus, -- vrIpNsStorageType, -- vrIpRipImportNeighbor, -- vrIpEgpAdminState, -- vrIpOspfExportMetric, -- vrIpOspfAreaAreaBdrRtrCount, -- vrPpIpPortMaxTxUnit, -- vrIpMcastFwdProtocol, -- vrIpMcastPimSmDomainCBsrComponentName, -- vrPpIpPortMcastDomain, -- vrIpMcastSnmpOperStatus, -- vrIpBootpSnmpAdminStatus, -- vrIpMcastIgmpOperationalState, -- vrIpIcmpInDestUnreachs, -- vrIpMcastStaticRouteComponentName, -- vrIpArpDynHostIfIndex, -- vrIpTcpCurrEstab, -- vrIpRdbPreference, -- vrIpOspfAreaAreaLsaCksumSum, -- vrIpEgpImportImportMetric, -- vrIpIcmpRowStatus, -- vrIpOspfLsdbStorageType, -- vrIpRipRipUpdate, -- vrIpRipQueryResponses, -- vrPpIpPortBootpPOutRequests, -- vrPpIpPortLogicalIfOspfIfRowStatus, -- vrPpIpPortLogicalIfRipIfPoisonReverseFlag, -- vrIpMcastStaticRouteOifsRowStatus, -- vrPpIpPortLogicalIfOspfIfSnmpAdminStatus, -- vrIpEgpImportComponentName, -- vrIpIcmpInErrors, -- vrIpMcastPimSmStorageType, -- vrIpOspfHostMetric, -- vrIpMcastFwdOifAge, -- vrIpMcastPimNbrIfIndex, -- vrIpOspfExtLsdbSequence, -- vrIpOspfExportNetListComponentName, -- vrIpUsageState, -- vrIpEgpNbrStateDowns, -- vrIpTcpRToMin, -- vrPpIpPortLogicalIfOspfIfBackupDesignatedRouter, -- vrIpRelayBCRowStatus, -- vrIpMcastPimSmDomainRpSetRpSetPriority, -- vrIpOspfVirtIfRowStatus, -- vrIpMcastPgAction, -- vrIpMcastCacheStatsEntriesFree, -- vrIpOspfStubMetricType, -- vrIpOspfOperationalState, -- vrIpOspfVirtIfHelloInterval, -- vrIpMcastPimSmDomainTxCRpAdvMsg, -- vrIpEgpImportNetStorageType, -- vrIpMcastIgmpGcRowStatus } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." ipGroup OBJECT IDENTIFIER ::= { ipMIB 1 } ipGroupBE OBJECT IDENTIFIER ::= { ipGroup 5 } ipGroupBE01 OBJECT IDENTIFIER ::= { ipGroupBE 2 } ipGroupBE01A OBJECT IDENTIFIER ::= { ipGroupBE01 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 Ip." -- STATUS mandatory -- DESCRIPTION "Ip MIB: MIB Version BE01A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-IpMIB -- INCLUDES { ipGroupBE01A } -- rfc1213 (MIB II) -- -- SUPPORTS RFC1213-MIB -- INCLUDES { at, ip, icmp, udp, egp } -- tcp group not supported -- -- variations for at group -- -- VARIATION atIfIndex -- ACCESS read-only -- DESCRIPTION "SET not allowed, because it is an index" -- -- VARIATION atNetAddress -- ACCESS read-only -- DESCRIPTION "SET not allowed, because it is an index" -- -- -- variations for the ip group -- -- VARIATION ipForwarding -- WRITE-SYNTAX INTEGER { forwarding(1) } -- DESCRIPTION "Only valid value is forwarding(1)" -- -- VARIATION ipRouteDest -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipRouteIfIndex -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipRouteMetric1 -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipRouteMetric2 -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipRouteMetric3 -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipRouteMetric4 -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipRouteNextHop -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipRouteType -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipRouteAge -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipRouteMask -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipRouteMetric5 -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- -- variations for the egp group -- -- VARIATION egpNeighEventTrigger -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- -- rfc1354 (IP Forwarding Table) -- -- SUPPORTS RFC1354-MIB -- INCLUDES { ipForward } -- -- VARIATION ipForwardMask -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipForwardIfIndex -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipForwardType -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipForwardInfo -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipForwardNextHopAS -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipForwardMetric1 -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipForwardMetric2 -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipForwardMetric3 -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipForwardMetric4 -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- VARIATION ipForwardMetric5 -- ACCESS read-only -- DESCRIPTION "SET not allowed" -- -- -- rfc1253 (OSPF Version 2 MIB) -- -- SUPPORTS RFC1253-MIB -- INCLUDES { ospfAreaRangeTable } -- -- VARIATION ospfAreaRangeAreaID -- ACCESS read-only -- DESCRIPTION "Table will be obsoleted. Read access provided" -- -- VARIATION ospfAreaRangeNet -- ACCESS read-only -- DESCRIPTION "Table will be obsoleted. Read access provided" -- -- VARIATION ospfAreaRangeMask -- ACCESS read-only -- DESCRIPTION "Table will be obsoleted. Read access provided" -- -- VARIATION ospfAreaRangeStatus -- ACCESS read-only -- DESCRIPTION "Table will be obsoleted. Read access provided" -- -- -- -- draft-ietf-ospf-mib-04.txt (OSPF version 2 MIB) -- (A draft for evolution of RFC1253) -- -- SUPPORTS OSPF-MIB -- -- INCLUDES { ospfGeneralGroup -- ospfAreaTable -- ospfStubAreaTable -- ospfLsdbTable -- ospfAreaRangeTable -- ospfHostTable -- ospfIfTable -- ospfIfMetricTable -- ospfVirtIfTable -- ospfNbrTable -- ospfVirtNbrTable -- ospfExtLsdbTable -- ospfAreaAggregateTable } -- -- variations for ospfGeneralGroup group -- -- VARIATION ospfTOSSupport -- WRITE-SYNTAX TruthValue { false(1) } -- DESCRIPTION "Value limited to false(1)" -- -- VARIATION ospfMulticastExtensions -- WRITE-SYNTAX INTEGER (0) -- DESCRIPTION "Value limited to 0" -- -- Variations for ospfAreaTable group -- -- VARIATION ospfAuthType -- WRITE-SYNTAX INTEGER { none (0), simplePassword (1) } -- DESCRIPTION "Value limited to none (0) and simplePassword (1)" -- -- Variations for the ospfIfTable -- -- VARIATION ospfIfMulticastForwarding -- WRITE-SYNTAX INTEGER { blocked (1) } -- DESCRIPTION "Value limited to blocked (1)" -- -- VARIATION ospfIfType -- WRITE-SYNTAX INTEGER { broadcast (1), nbma (2), pointToPoint (3) } -- DESCRIPTION "Value limited to broadcast (1), nbma (2) and -- pointToPoint (3)" -- -- rfc1724 (RIP Version2 MIB) -- -- SUPPORTS RFC1724-MIB -- INCLUDES { rip2Globals, rip2IfStatTable, rip2IfConfTable } -- rip2PeerTable not supported -- -- variations for the rip2IfStatTable -- -- VARIATION rip2IfStatStatus -- ACCESS read-only -- DESCRIPTION "Set not allowed" -- -- variations for the rip2IfConfTable -- -- VARIATION rip2IfConfDomain -- ACCESS read-only -- DESCRIPTION "Set not allowed" -- -- VARIATION rip2IfConfAuthType -- ACCESS read-only -- DESCRIPTION "Set not allowed" -- -- VARIATION rip2IfConfAuthKey -- ACCESS read-only -- DESCRIPTION "Set not allowed" -- -- VARIATION rip2IfConfSend -- ACCESS read-only -- DESCRIPTION "Set not allowed" -- -- VARIATION rip2IfConfRecveive -- ACCESS read-only -- DESCRIPTION "Set not allowed" -- -- VARIATION rip2IfConfDefaultMetric -- ACCESS read-only -- DESCRIPTION "Set not allowed" -- -- VARIATION rip2IfConfStatus -- ACCESS read-only -- DESCRIPTION "Set not allowed" -- -- VARIATION rip2IfConfSrcAddress -- ACCESS read-only -- DESCRIPTION "Set not allowed" ipCapabilities OBJECT IDENTIFIER ::= { ipMIB 3 } ipCapabilitiesBE OBJECT IDENTIFIER ::= { ipCapabilities 5 } ipCapabilitiesBE01 OBJECT IDENTIFIER ::= { ipCapabilitiesBE 2 } ipCapabilitiesBE01A OBJECT IDENTIFIER ::= { ipCapabilitiesBE01 2 } END