Nortel-Magellan-Passport-IpiVcMIB device MIB details by Northern Telecom Ltd
Nortel-Magellan-Passport-IpiVcMIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing Nortel-Magellan-Passport-IpiVcMIB.
| Vendor: | Northern Telecom Ltd |
|---|---|
| Mib: | Nortel-Magellan-Passport-IpiVcMIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
Nortel-Magellan-Passport-IpiVcMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 IpAddress FROM RFC1155-SMI components, passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB Counter32, DisplayString, StorageType, RowStatus, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB Hex, NonReplicated, EnterpriseDateAndTime, DigitString FROM Nortel-Magellan-Passport-TextualConventionsMIB; -- LAST-UPDATED "9903220000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- IpiVc Enterprise MIB." ipiVcMIB OBJECT IDENTIFIER ::= { passportMIBs 53 } -- -- IpiVc -- -- The IP interface over VC allows access to the module for external -- network management. ipivc OBJECT IDENTIFIER ::= { components 51 } ipivcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of ipivc components." ::= { ipivc 1 } ipivcRowStatusEntry OBJECT-TYPE SYNTAX IpivcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single ipivc component." INDEX { ipivcIndex } ::= { ipivcRowStatusTable 1 } IpivcRowStatusEntry ::= SEQUENCE { ipivcRowStatus RowStatus, ipivcComponentName DisplayString, ipivcStorageType StorageType, ipivcIndex NonReplicated } ipivcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of ipivc components. These components can be added and deleted." ::= { ipivcRowStatusEntry 1 } ipivcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { ipivcRowStatusEntry 2 } ipivcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the ipivc tables." ::= { ipivcRowStatusEntry 4 } ipivcIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the ipivc tables." ::= { ipivcRowStatusEntry 10 } ipivcProvTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the IpiVc component." ::= { ipivc 10 } ipivcProvEntry OBJECT-TYPE SYNTAX IpivcProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ipivcProvTable." INDEX { ipivcIndex } ::= { ipivcProvTable 1 } IpivcProvEntry ::= SEQUENCE { ipivcIpAddress IpAddress, ipivcMaximumNumberOfLcn Unsigned32 } ipivcIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This IP Address represents the IP address of the IP interface." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { ipivcProvEntry 1 } ipivcMaximumNumberOfLcn OBJECT-TYPE SYNTAX Unsigned32 (24) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the maximum number of LCNs that can be setup to the IP Interface over Vc. It defines the maximum number of calls that the external network management systems can setup to IpiVc simultaneously." DEFVAL { 24 } ::= { ipivcProvEntry 2 } -- IpiVc Dna -- This is the description of the generic Vc Dna Component. It -- includes the superset of all attributes which may apply to a VC. -- Particular applications will typically offer only a subset of these -- attributes by providing a definition of their own Dna subcomponent. ipivcDna OBJECT IDENTIFIER ::= { ipivc 2 } ipivcDnaRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcDnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of ipivcDna components." ::= { ipivcDna 1 } ipivcDnaRowStatusEntry OBJECT-TYPE SYNTAX IpivcDnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single ipivcDna component." INDEX { ipivcIndex, ipivcDnaIndex } ::= { ipivcDnaRowStatusTable 1 } IpivcDnaRowStatusEntry ::= SEQUENCE { ipivcDnaRowStatus RowStatus, ipivcDnaComponentName DisplayString, ipivcDnaStorageType StorageType, ipivcDnaIndex NonReplicated } ipivcDnaRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of ipivcDna components. These components cannot be added nor deleted." ::= { ipivcDnaRowStatusEntry 1 } ipivcDnaComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { ipivcDnaRowStatusEntry 2 } ipivcDnaStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the ipivcDna tables." ::= { ipivcDnaRowStatusEntry 4 } ipivcDnaIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the ipivcDna tables." ::= { ipivcDnaRowStatusEntry 10 } ipivcDnaAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcDnaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DnaAddress group contains attributes common to all Dna's. Every Dna used in the network is defined with this group 0f 2 attributes. String of address digits is complemented by type of address and Npi. These attributes are used to interpret format of the address digits." ::= { ipivcDna 10 } ipivcDnaAddressEntry OBJECT-TYPE SYNTAX IpivcDnaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ipivcDnaAddressTable." INDEX { ipivcIndex, ipivcDnaIndex } ::= { ipivcDnaAddressTable 1 } IpivcDnaAddressEntry ::= SEQUENCE { ipivcDnaNumberingPlanIndicator INTEGER, ipivcDnaDataNetworkAddress DigitString } ipivcDnaNumberingPlanIndicator OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the Numbering Plan Indicator (NPI) of the Dna that is entered. Address may belong to X.121 or E.164 plans. X.121 is used in packet svitched data networks." DEFVAL { x121 } ::= { ipivcDnaAddressEntry 1 } ipivcDnaDataNetworkAddress OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-write STATUS mandatory DESCRIPTION "Dna attribute contains digits which form unique identifier of the customer. It is the equivalent of the telephone number in the telephone network. MaximumLenOfDna is 15digits." ::= { ipivcDnaAddressEntry 2 } ipivcDnaOutgoingOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcDnaOutgoingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DnaOutOptionsProv group defines call options of a Dna for calls which are made out of the interface represented by Dna. All these options are not used for calls arriving to the interface represented by Dna." ::= { ipivcDna 11 } ipivcDnaOutgoingOptionsEntry OBJECT-TYPE SYNTAX IpivcDnaOutgoingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ipivcDnaOutgoingOptionsTable." INDEX { ipivcIndex, ipivcDnaIndex } ::= { ipivcDnaOutgoingOptionsTable 1 } IpivcDnaOutgoingOptionsEntry ::= SEQUENCE { ipivcDnaOutCalls INTEGER, ipivcDnaOutDefaultPathSensitivity INTEGER, ipivcDnaOutPathSensitivityOverRide INTEGER, ipivcDnaDefaultTransferPriority INTEGER, ipivcDnaTransferPriorityOverRide INTEGER } ipivcDnaOutCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of allowed indicates that outgoing calls (from the DTE to the network) can be made using this particular DNA. If set to a value of disallowed, then outgoing calls cannot be made using this DNA - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Outgoing Calls Barred' feature for DNAs in that outgoing calls are barred if this attribute is set to a value of disallowed. Either outCalls, or incCalls (or both) must be set to a value of allowed for this DNA to be useable." DEFVAL { disallowed } ::= { ipivcDnaOutgoingOptionsEntry 1 } ipivcDnaOutDefaultPathSensitivity OBJECT-TYPE SYNTAX INTEGER { throughput(0), delay(1) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute specifies the default class of path sensitivity to network for all outgoing calls using this particular Dna. The chosen default class of path sensitivity applies to all outgoing calls established using this Dna. This attribute, if set to a value of throughput, indicates that the default class is throughput sensitive. If set to a value of delay, then the default class is delay sensitive. The default of outDefaultPathSensitivity is throughput." DEFVAL { throughput } ::= { ipivcDnaOutgoingOptionsEntry 11 } ipivcDnaOutPathSensitivityOverRide OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS obsolete DESCRIPTION "If this attribute is set to in the call request, the called end will use the calling end provisioning data on path sensitivity to override its own provisioning data. The default of outPathSensitivityOverRide is no." DEFVAL { no } ::= { ipivcDnaOutgoingOptionsEntry 12 } ipivcDnaDefaultTransferPriority OBJECT-TYPE SYNTAX INTEGER { normal(0), high(9) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default transfer priority to network for all outgoing calls using this particular Dna. It is overRidden by the transferPriority provisioned in the DLCI Direct Call sub- component. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput. The default of defaultTransferPriority is normal." DEFVAL { normal } ::= { ipivcDnaOutgoingOptionsEntry 18 } ipivcDnaTransferPriorityOverRide OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "When this attribute is set to yes, the called end will use the calling end provisioning data on transfer priority to override its own provisioning data. If it is set no, the called end will use its own provisioning data on transfer priority. For more information about transfer priority, please refer to the previous attribute defaultTransferPriority. The default of transferPriorityOverRide is no." DEFVAL { no } ::= { ipivcDnaOutgoingOptionsEntry 19 } ipivcDnaIncomingOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcDnaIncomingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DnaIncOptions defines set of options for incoming calls. These options are used for calls arriving to the interface represented by Dna. For calls originated from the interfasce, IncomingOptions attributes are not used." ::= { ipivcDna 12 } ipivcDnaIncomingOptionsEntry OBJECT-TYPE SYNTAX IpivcDnaIncomingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ipivcDnaIncomingOptionsTable." INDEX { ipivcIndex, ipivcDnaIndex } ::= { ipivcDnaIncomingOptionsTable 1 } IpivcDnaIncomingOptionsEntry ::= SEQUENCE { ipivcDnaIncCalls INTEGER, ipivcDnaIncHighPriorityReverseCharge INTEGER, ipivcDnaIncNormalPriorityReverseCharge INTEGER, ipivcDnaIncIntlNormalCharge INTEGER, ipivcDnaIncIntlReverseCharge INTEGER, ipivcDnaIncFastSelect INTEGER, ipivcDnaIncSameService INTEGER, ipivcDnaIncChargeTransfer INTEGER, ipivcDnaIncAccess INTEGER } ipivcDnaIncCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of allowed indicates that incoming calls (from the network to the DTE) can be made to this DNA. If set to a value of disallowed, then incoming calls cannot be made to this DNA - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Incoming Calls Barred' feature for DNAs in that incoming calls are barred if this attribute is set to a value of disallowed. Either outCalls, or incCalls (or both) must be set to a value of allowed for this DNA to be useable." DEFVAL { allowed } ::= { ipivcDnaIncomingOptionsEntry 1 } ipivcDnaIncHighPriorityReverseCharge OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of allowed indicates that incoming high priority, reverse charged calls (from the network to the DTE) can be made to this DNA. If set to a value of disallowed, then such calls cannot be made to this DNA - such calls will be cleared by the local DCE. This attribute, together with the incNormalPriorityReverseChargeCalls attribute corresponds to the CCITT 'Reverse Charging Acceptance' feature for DNAs in that reverse charged calls are accepted if both attributes are set to a value of allowed. This attribute is ignored if the corresponding attribute, incCalls is set to a value of disallowed." DEFVAL { allowed } ::= { ipivcDnaIncomingOptionsEntry 2 } ipivcDnaIncNormalPriorityReverseCharge OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of allowed indicates that incoming normal priority, reverse charged calls (from the network to the DTE) can be made to this DNA. If set to a value of disallowed, then such calls cannot be made to this DNA - such calls will be cleared by the local DCE. This attribute, together with the incHighPriorityReverseChargeCalls attribute corresponds to the CCITT 'Reverse Charging Acceptance' feature for DNAs in that reverse charged calls are accepted if both attributes are set to a value of allowed. This attribute is ignored if the corresponding attribute, incCalls is set to a value of disallowed." DEFVAL { allowed } ::= { ipivcDnaIncomingOptionsEntry 3 } ipivcDnaIncIntlNormalCharge OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of allowed indicates that incoming international normal charged calls (from the network to the DTE) can be made to this DNA. If set to a value of disallowed, then such calls cannot be made to this DNA - such calls will be cleared by the local DCE. This attribute also currently controls access to/from the E.164 numbering plan, and if set to a value of allowed, then cross- numbering plan calls (also normal charged) are allowed. This attribute is ignored if the corresponding attribute, incCalls is set to a value of disallowed." DEFVAL { allowed } ::= { ipivcDnaIncomingOptionsEntry 4 } ipivcDnaIncIntlReverseCharge OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of allowed indicates that incoming international reverse charged calls (from the network to the DTE) can be made to this DNA. If set to a value of disallowed, then such calls cannot be made to this DNA - such calls will be cleared by the local DCE. This attribute also currently controls access to/from the E.164 numbering plan, and if set to a value of allowed, then cross- numbering plan calls (also normal charged) are allowed. This attribute is ignored if the corresponding attribute, incCalls is set to a value of disallowed." DEFVAL { allowed } ::= { ipivcDnaIncomingOptionsEntry 5 } ipivcDnaIncFastSelect OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies whether fast select calls may be received. This attribute, if set to a value of allowed indicates that incoming fast select calls (from the network to the DTE) can be made to this DNA. If set to a value of disallowed, then such calls cannot be made to this DNA - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Fast Select Acceptance' feature for DNAs in that incoming fast select calls are accepted if this attribute is set to a value of allowed. This attribute is ignored if the corresponding attribute, incCalls is set to a value of disallowed." DEFVAL { disallowed } ::= { ipivcDnaIncomingOptionsEntry 6 } ipivcDnaIncSameService OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of allowed indicates that incoming calls from the same service type (eg: X.25, ITI, SNA) (from the network to the DTE) can be made to this DNA. If set to a value of disallowed, then such calls cannot be made to this DNA - such calls will be cleared by the local DCE. This attribute is ignored if the corresponding attribute, incCalls is set to a value of disallowed." DEFVAL { allowed } ::= { ipivcDnaIncomingOptionsEntry 7 } ipivcDnaIncChargeTransfer OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of yes indicates that the charges for incoming normal charged calls from a DTE with the same NIC (calls from the network to the DTE) will be transferred to the called DTE. If set to a value of no, then charges will not be transferred. This attribute is ignored if the corresponding attribute, incCalls is set to a value of disallowed." DEFVAL { no } ::= { ipivcDnaIncomingOptionsEntry 8 } ipivcDnaIncAccess OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is an extension of the Closed User Group (CUG) facility, as follows: This attribute, if set to a value of allowed indicates that incoming calls (from the network to the DTE) from the open (non-CUG) part of the network are permitted. It also permits incoming calls from DTEs that have Outgoing Access capabilities. If set to a value of disallowed, then such calls cannot be made to this DNA - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Closed User Group with Incoming Access' feature for DNAs in that incoming access is granted if this attribute is set to a value of allowed." DEFVAL { disallowed } ::= { ipivcDnaIncomingOptionsEntry 9 } ipivcDnaCallOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcDnaCallOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DnaCallOptions group defines additional options for calls not related directly to direction of a call." ::= { ipivcDna 13 } ipivcDnaCallOptionsEntry OBJECT-TYPE SYNTAX IpivcDnaCallOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ipivcDnaCallOptionsTable." INDEX { ipivcIndex, ipivcDnaIndex } ::= { ipivcDnaCallOptionsTable 1 } IpivcDnaCallOptionsEntry ::= SEQUENCE { ipivcDnaServiceCategory INTEGER, ipivcDnaPacketSizes OCTET STRING, ipivcDnaDefaultRecvFrmNetworkPacketSize INTEGER, ipivcDnaDefaultSendToNetworkPacketSize INTEGER, ipivcDnaDefaultRecvFrmNetworkThruputClass Unsigned32, ipivcDnaDefaultSendToNetworkThruputClass Unsigned32, ipivcDnaDefaultRecvFrmNetworkWindowSize Unsigned32, ipivcDnaDefaultSendToNetworkWindowSize Unsigned32, ipivcDnaPacketSizeNegotiation INTEGER, ipivcDnaAccountClass Unsigned32, ipivcDnaServiceExchange Unsigned32, ipivcDnaCugFormat INTEGER, ipivcDnaCug0AsNonCugCall INTEGER, ipivcDnaFastSelectCallsOnly INTEGER } ipivcDnaServiceCategory OBJECT-TYPE SYNTAX INTEGER { gsp(0), x25(1), enhancedIti(2), ncs(3), mlti(4), sm(5), ici(6), dsp3270(7), iam(8), mlhi(9), term3270(10), iti(11), bsi(13), hostIti(14), x75(15), hdsp3270(16), api3201(20), sdlc(21), snaMultiHost(22), redirectionServ(23), trSnaTpad(24), offnetNui(25), gasServer(26), vapServer(28), vapAgent(29), frameRelay(30), ipiVc(31) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is computed based on the type of service within which this DNA is configured. It is placed into the Service Category attributes in the accounting record by both ends of the VC." DEFVAL { ipiVc } ::= { ipivcDnaCallOptionsEntry 1 } ipivcDnaPacketSizes OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the allowable packet sizes supported for calls setup using this DNA. To set a given packet size to be allowed on the DNA, the packet size is entered, and the corresponding bit in the structure is set to a value of 1. To set a given packet size to be disallowed on the DNA, the packet size is entered preceeded with the '~' character, and the corresponding bit in the structure is set to a value of 0. CCITT recommends that packet size 128 always be supported. Description of bits: n16(0) n32(1) n64(2) n128(3) n256(4) n512(5) n1024(6) n2048(7) n4096(8)" DEFVAL { '0100'H } ::= { ipivcDnaCallOptionsEntry 2 } ipivcDnaDefaultRecvFrmNetworkPacketSize OBJECT-TYPE SYNTAX INTEGER { n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the default local receive packet size from network to DTE for all calls using this particular DNA." DEFVAL { n2048 } ::= { ipivcDnaCallOptionsEntry 3 } ipivcDnaDefaultSendToNetworkPacketSize OBJECT-TYPE SYNTAX INTEGER { n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the default local send packet size from DTE to network for all calls using this particular DNA." DEFVAL { n2048 } ::= { ipivcDnaCallOptionsEntry 4 } ipivcDnaDefaultRecvFrmNetworkThruputClass OBJECT-TYPE SYNTAX Unsigned32 (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the default receive throughput class for all calls using this particular DNA." DEFVAL { 10 } ::= { ipivcDnaCallOptionsEntry 5 } ipivcDnaDefaultSendToNetworkThruputClass OBJECT-TYPE SYNTAX Unsigned32 (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the default send throughput class for all calls using this particular DNA." DEFVAL { 10 } ::= { ipivcDnaCallOptionsEntry 6 } ipivcDnaDefaultRecvFrmNetworkWindowSize OBJECT-TYPE SYNTAX Unsigned32 (1..7) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the default number of data packets that can be received by the DTE from the DCE before more packets can be received. This view is oriented with respect to the DTE." DEFVAL { 2 } ::= { ipivcDnaCallOptionsEntry 7 } ipivcDnaDefaultSendToNetworkWindowSize OBJECT-TYPE SYNTAX Unsigned32 (1..7) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of data packets that can be transmitted from the DTE to the DCE and must be acknowledged before more packets can be transmitted." DEFVAL { 2 } ::= { ipivcDnaCallOptionsEntry 8 } ipivcDnaPacketSizeNegotiation OBJECT-TYPE SYNTAX INTEGER { endToEnd(0), local(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of local indicates that packet sizes can be negotiated locally at the interface irrespective of the remote interface. If set to a value of endtoEnd, then local negotiation is not permitted and packet sizes are negotiated between 2 ends of Vc." DEFVAL { local } ::= { ipivcDnaCallOptionsEntry 9 } ipivcDnaAccountClass OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the accounting class which is reserved for network operations usage. Its value is returned in the accounting record in the local and remote service type attributes. Use of this attribute is decided by network operator. This attribute is returned by the local VC in the accounting record for all calls setup using this particular DNA." DEFVAL { 0 } ::= { ipivcDnaCallOptionsEntry 10 } ipivcDnaServiceExchange OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is an arbitrary number, Data Service Exchange, as entered by the network operator and reported in accounting record. It is converted into an internal 8-bit integer value for use in the accounting record as well as in various X.25 and X.75 Tariff utilities." DEFVAL { 0 } ::= { ipivcDnaCallOptionsEntry 12 } ipivcDnaCugFormat OBJECT-TYPE SYNTAX INTEGER { basic(0), extended(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies which cug format is used when DTE signals CUG indices, basic or extended. This attribute, if set to a value of extended indicates that the DTE signals and receives CUG indices in extended CUG format. If set to a value of basic, then the DTE signals and receives CUG indices in the basic CUG format." DEFVAL { basic } ::= { ipivcDnaCallOptionsEntry 13 } ipivcDnaCug0AsNonCugCall OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of allowed indicates that when a CUG index of 0 is signalled in a call request packet, the call is treated as a non-CUG call. If this attribute is set to a value of disallowed, then a CUG index of 0 is treated as an index, and an attempt is made to find the particular CUG corresponding with the DNA." DEFVAL { disallowed } ::= { ipivcDnaCallOptionsEntry 14 } ipivcDnaFastSelectCallsOnly OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of yes, indicates that the service is permitted restricted fast select calls only in both the incoming and the outgoing directions using this DNA. If set to a value of no, then non fast select calls are permitted as well." DEFVAL { no } ::= { ipivcDnaCallOptionsEntry 17 } -- IpiVc Dna Cug -- ClosedUserGroup options defines options associated with national -- or international Cug Identifier. Other Dna's in the network can have -- Cug's defined which groups these Dna's by Cug InterlockCode. If -- Dna's are defined with Cugs, calls from Dna's which do not have -- the same interlockCode defined are refused. Attributes incAccess -- and outAccess can override this rule. ipivcDnaCug OBJECT IDENTIFIER ::= { ipivcDna 2 } ipivcDnaCugRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcDnaCugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of ipivcDnaCug components." ::= { ipivcDnaCug 1 } ipivcDnaCugRowStatusEntry OBJECT-TYPE SYNTAX IpivcDnaCugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single ipivcDnaCug component." INDEX { ipivcIndex, ipivcDnaIndex, ipivcDnaCugIndex } ::= { ipivcDnaCugRowStatusTable 1 } IpivcDnaCugRowStatusEntry ::= SEQUENCE { ipivcDnaCugRowStatus RowStatus, ipivcDnaCugComponentName DisplayString, ipivcDnaCugStorageType StorageType, ipivcDnaCugIndex NonReplicated } ipivcDnaCugRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of ipivcDnaCug components. These components cannot be added nor deleted." ::= { ipivcDnaCugRowStatusEntry 1 } ipivcDnaCugComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { ipivcDnaCugRowStatusEntry 2 } ipivcDnaCugStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the ipivcDnaCug tables." ::= { ipivcDnaCugRowStatusEntry 4 } ipivcDnaCugIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the ipivcDnaCug tables." ::= { ipivcDnaCugRowStatusEntry 10 } ipivcDnaCugCugOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcDnaCugCugOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines options for Dna closed user group. Attributes in this group define options associated with interlockCode. Dna's with the same Cug (interlockCode) can make calls within this group. Various combinations which permit or prevent calls in the same Cug group are defined here." ::= { ipivcDnaCug 10 } ipivcDnaCugCugOptionsEntry OBJECT-TYPE SYNTAX IpivcDnaCugCugOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ipivcDnaCugCugOptionsTable." INDEX { ipivcIndex, ipivcDnaIndex, ipivcDnaCugIndex } ::= { ipivcDnaCugCugOptionsTable 1 } IpivcDnaCugCugOptionsEntry ::= SEQUENCE { ipivcDnaCugType INTEGER, ipivcDnaCugDnic DigitString, ipivcDnaCugInterlockCode Unsigned32, ipivcDnaCugOutCalls INTEGER, ipivcDnaCugIncCalls INTEGER, ipivcDnaCugPrivileged INTEGER } ipivcDnaCugType OBJECT-TYPE SYNTAX INTEGER { national(0), international(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the CUG type - the CUG is either a national CUG, or an international CUG. International closed user groups are usually established between DTEs for which there is an X.75 Gateway between; whereas national closed user groups are usually established between DTEs for which there is no X.75 Gateway between. (National CUGs cannot normally traverse an X.75 Gateway). If this attribute is set to national, then the CUG is a national CUG, in which case, the DNIC should be left at its default value of BCD.0000 since it is not part of a national CUG. If this attribute is set to international, then the CUG is an international CUG, in which case, the DNIC should be set appropriately as part of the CUG interlock code." DEFVAL { national } ::= { ipivcDnaCugCugOptionsEntry 1 } ipivcDnaCugDnic OBJECT-TYPE SYNTAX DigitString (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the DNIC (Data Network ID Code) of the Cug by which packet networks are identified if the Cug is an International Cug - it is specified as 4 BCD digits. This attribute is not applicable if the Cug is a National Cug, as specified by the Cug TYPE attribute. There are usually 1 or 2 DNICs assigned per country, for public networks. The U.S. is an exception where each BOC has a DNIC. Also, a group of private networks can have its own DNIC. DNIC value is not an arbitrary number. It is assigned by international aggreement and controlled by CCITT." DEFVAL { '30303030'H } -- "0000" ::= { ipivcDnaCugCugOptionsEntry 2 } ipivcDnaCugInterlockCode OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Cug Identifier of a national or international Cug call. It is an arbitrary number and it also can be called Cug in some descriptions. Interfaces (Dna's) defined with this number can make calls to Dna's with the same interlockCode." DEFVAL { 0 } ::= { ipivcDnaCugCugOptionsEntry 3 } ipivcDnaCugOutCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of allowed indicates that outgoing calls (from the DTE into the network) can be made using this particular CUG. If set to a value of disallowed, then outgoing calls cannot be made using this CUG - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Outgoing Calls Barred' feature for CUGs in that outgoing calls are barred if this attribute is set to a value of disallowed." DEFVAL { disallowed } ::= { ipivcDnaCugCugOptionsEntry 5 } ipivcDnaCugIncCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of allowed indicates that incoming calls (from the network to the DTE) can be made using this particular CUG. If set to a value of disallowed, then incoming calls cannot be made using this CUG - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Incoming Calls Barred' feature for CUGs in that incoming calls are barred if this attribute is set to a value of disallowed." DEFVAL { allowed } ::= { ipivcDnaCugCugOptionsEntry 6 } ipivcDnaCugPrivileged OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute, if set to a value of yes indicates that this CUG is a privileged CUG. In DPN, at least one side of a call setup within a CUG must have the CUG as a privileged CUG. If set to a value of no, then the CUG is not privileged. If both the local DTE and the remote DTE subscribe to the CUG, but it is not privileged, then the call will be cleared. This attribute is typically used for a host DTE which must accept calls from many other DTEs in which case the other DTEs cannot call one another, but can call the host. In this example, the host would have the privileged CUG, and the other DTEs would belong to the same CUG, but it would not be privileged." DEFVAL { yes } ::= { ipivcDnaCugCugOptionsEntry 7 } -- -- IpiVc DefaultRoute -- -- This component contains information for setting up a default route -- on the IpiVc service.The default route feature permits establishment -- of a TCP/IP connection to the Software Distribution (SDS). -- ipivcDr OBJECT IDENTIFIER ::= { ipivc 3 } ipivcDrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcDrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of ipivcDr components." ::= { ipivcDr 1 } ipivcDrRowStatusEntry OBJECT-TYPE SYNTAX IpivcDrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single ipivcDr component." INDEX { ipivcIndex, ipivcDrIndex } ::= { ipivcDrRowStatusTable 1 } IpivcDrRowStatusEntry ::= SEQUENCE { ipivcDrRowStatus RowStatus, ipivcDrComponentName DisplayString, ipivcDrStorageType StorageType, ipivcDrIndex NonReplicated } ipivcDrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of ipivcDr components. These components can be added and deleted." ::= { ipivcDrRowStatusEntry 1 } ipivcDrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { ipivcDrRowStatusEntry 2 } ipivcDrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the ipivcDr tables." ::= { ipivcDrRowStatusEntry 4 } ipivcDrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the ipivcDr tables." ::= { ipivcDrRowStatusEntry 10 } ipivcDrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcDrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for setting up a default route on the IpiVc service." ::= { ipivcDr 10 } ipivcDrProvEntry OBJECT-TYPE SYNTAX IpivcDrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ipivcDrProvTable." INDEX { ipivcIndex, ipivcDrIndex } ::= { ipivcDrProvTable 1 } IpivcDrProvEntry ::= SEQUENCE { ipivcDrCallingIpAddress IpAddress, ipivcDrCallingNumberingPlanIndicator INTEGER, ipivcDrCallingDataNetworkAddress DigitString } ipivcDrCallingIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The field specifies the IP Address of the remote end, which issues the X.25 call." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { ipivcDrProvEntry 1 } ipivcDrCallingNumberingPlanIndicator OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This field specifies the numbering plan of the address." DEFVAL { x121 } ::= { ipivcDrProvEntry 2 } ipivcDrCallingDataNetworkAddress OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-write STATUS mandatory DESCRIPTION "This field specifies the address (in Binary Coded Decimal BCD format) assigned to the remote end." ::= { ipivcDrProvEntry 3 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- -- IpiVc Lcn/<n> -- -- The Logical Channel Number responsible for the logical connection -- with the VC. There can be up to 24 instances of Lcn on the IpiVc -- component. ipivcLcn OBJECT IDENTIFIER ::= { ipivc 4 } ipivcLcnRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcLcnRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of ipivcLcn components." ::= { ipivcLcn 1 } ipivcLcnRowStatusEntry OBJECT-TYPE SYNTAX IpivcLcnRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single ipivcLcn component." INDEX { ipivcIndex, ipivcLcnIndex } ::= { ipivcLcnRowStatusTable 1 } IpivcLcnRowStatusEntry ::= SEQUENCE { ipivcLcnRowStatus RowStatus, ipivcLcnComponentName DisplayString, ipivcLcnStorageType StorageType, ipivcLcnIndex Integer32 } ipivcLcnRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of ipivcLcn components. These components cannot be added nor deleted." ::= { ipivcLcnRowStatusEntry 1 } ipivcLcnComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { ipivcLcnRowStatusEntry 2 } ipivcLcnStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the ipivcLcn tables." ::= { ipivcLcnRowStatusEntry 4 } ipivcLcnIndex OBJECT-TYPE SYNTAX Integer32 (16..39) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the ipivcLcn tables." ::= { ipivcLcnRowStatusEntry 10 } ipivcLcnStateTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcLcnStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide." ::= { ipivcLcn 10 } ipivcLcnStateEntry OBJECT-TYPE SYNTAX IpivcLcnStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ipivcLcnStateTable." INDEX { ipivcIndex, ipivcLcnIndex } ::= { ipivcLcnStateTable 1 } IpivcLcnStateEntry ::= SEQUENCE { ipivcLcnAdminState INTEGER, ipivcLcnOperationalState INTEGER, ipivcLcnUsageState INTEGER, ipivcLcnAvailabilityStatus OCTET STRING, ipivcLcnProceduralStatus OCTET STRING, ipivcLcnControlStatus OCTET STRING, ipivcLcnAlarmStatus OCTET STRING, ipivcLcnStandbyStatus INTEGER, ipivcLcnUnknownStatus INTEGER } ipivcLcnAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component." DEFVAL { unlocked } ::= { ipivcLcnStateEntry 1 } ipivcLcnOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component." DEFVAL { disabled } ::= { ipivcLcnStateEntry 2 } ipivcLcnUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component." DEFVAL { idle } ::= { ipivcLcnStateEntry 3 } ipivcLcnAvailabilityStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)" ::= { ipivcLcnStateEntry 4 } ipivcLcnProceduralStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)" ::= { ipivcLcnStateEntry 5 } ipivcLcnControlStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)" ::= { ipivcLcnStateEntry 6 } ipivcLcnAlarmStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)" ::= { ipivcLcnStateEntry 7 } ipivcLcnStandbyStatus OBJECT-TYPE SYNTAX INTEGER { hotStandby(0), coldStandby(1), providingService(2), notSet(15) } ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource." DEFVAL { notSet } ::= { ipivcLcnStateEntry 8 } ipivcLcnUnknownStatus OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure." DEFVAL { false } ::= { ipivcLcnStateEntry 9 } ipivcLcnOperTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcLcnOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains status of the internal IP network interface." ::= { ipivcLcn 11 } ipivcLcnOperEntry OBJECT-TYPE SYNTAX IpivcLcnOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ipivcLcnOperTable." INDEX { ipivcIndex, ipivcLcnIndex } ::= { ipivcLcnOperTable 1 } IpivcLcnOperEntry ::= SEQUENCE { ipivcLcnIpInterfaceDevice INTEGER, ipivcLcnDestinationIpAddress IpAddress, ipivcLcnPacketsSent Counter32, ipivcLcnPacketsReceived Counter32, ipivcLcnDiscardTxPackets Counter32, ipivcLcnDiscardRcvPackets Counter32 } ipivcLcnIpInterfaceDevice OBJECT-TYPE SYNTAX INTEGER { inactive(0), active(1) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the internal IP network interface is inactive until an IP packet is exchanged between a Network Management Station and the internal IP network interface (via the LCN). At this point, the status changes to active." DEFVAL { inactive } ::= { ipivcLcnOperEntry 1 } ipivcLcnDestinationIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the IP address of the remote network device connected to this interface. The destinationIpAddress default is 0.0.0.0, until the first data packet is received from the remote end." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { ipivcLcnOperEntry 2 } ipivcLcnPacketsSent OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of IP packets sent from this interface." ::= { ipivcLcnOperEntry 3 } ipivcLcnPacketsReceived OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of IP packets received from the remote network device." ::= { ipivcLcnOperEntry 4 } ipivcLcnDiscardTxPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of IP packets destined to the remote end which were discarded by the interface." ::= { ipivcLcnOperEntry 5 } ipivcLcnDiscardRcvPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts number of IP packets received from the remote end which were discarded by this interface." ::= { ipivcLcnOperEntry 6 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- ... Vc() -- This component defines display of general Vc dynamic attributes ipivcLcnVc OBJECT IDENTIFIER ::= { ipivcLcn 2 } ipivcLcnVcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcLcnVcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of ipivcLcnVc components." ::= { ipivcLcnVc 1 } ipivcLcnVcRowStatusEntry OBJECT-TYPE SYNTAX IpivcLcnVcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single ipivcLcnVc component." INDEX { ipivcIndex, ipivcLcnIndex, ipivcLcnVcIndex } ::= { ipivcLcnVcRowStatusTable 1 } IpivcLcnVcRowStatusEntry ::= SEQUENCE { ipivcLcnVcRowStatus RowStatus, ipivcLcnVcComponentName DisplayString, ipivcLcnVcStorageType StorageType, ipivcLcnVcIndex NonReplicated } ipivcLcnVcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of ipivcLcnVc components. These components cannot be added nor deleted." ::= { ipivcLcnVcRowStatusEntry 1 } ipivcLcnVcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { ipivcLcnVcRowStatusEntry 2 } ipivcLcnVcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the ipivcLcnVc tables." ::= { ipivcLcnVcRowStatusEntry 4 } ipivcLcnVcIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the ipivcLcnVc tables." ::= { ipivcLcnVcRowStatusEntry 10 } ipivcLcnVcCadTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcLcnVcCadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents operational call data related to General Vc. It can be displayed only for General Vc which is created by application." ::= { ipivcLcnVc 10 } ipivcLcnVcCadEntry OBJECT-TYPE SYNTAX IpivcLcnVcCadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ipivcLcnVcCadTable." INDEX { ipivcIndex, ipivcLcnIndex, ipivcLcnVcIndex } ::= { ipivcLcnVcCadTable 1 } IpivcLcnVcCadEntry ::= SEQUENCE { ipivcLcnVcType INTEGER, ipivcLcnVcState INTEGER, ipivcLcnVcPreviousState INTEGER, ipivcLcnVcDiagnosticCode Unsigned32, ipivcLcnVcPreviousDiagnosticCode Unsigned32, ipivcLcnVcCalledNpi INTEGER, ipivcLcnVcCalledDna DigitString, ipivcLcnVcCalledLcn Unsigned32, ipivcLcnVcCallingNpi INTEGER, ipivcLcnVcCallingDna DigitString, ipivcLcnVcCallingLcn Unsigned32, ipivcLcnVcAccountingEnabled INTEGER, ipivcLcnVcFastSelectCall INTEGER, ipivcLcnVcLocalRxPktSize INTEGER, ipivcLcnVcLocalTxPktSize INTEGER, ipivcLcnVcLocalTxWindowSize Unsigned32, ipivcLcnVcLocalRxWindowSize Unsigned32, ipivcLcnVcPathReliability INTEGER, ipivcLcnVcAccountingEnd INTEGER, ipivcLcnVcPriority INTEGER, ipivcLcnVcSegmentSize Unsigned32, ipivcLcnVcSubnetTxPktSize INTEGER, ipivcLcnVcSubnetTxWindowSize Unsigned32, ipivcLcnVcSubnetRxPktSize INTEGER, ipivcLcnVcSubnetRxWindowSize Unsigned32, ipivcLcnVcMaxSubnetPktSize Unsigned32, ipivcLcnVcTransferPriorityToNetwork INTEGER, ipivcLcnVcTransferPriorityFromNetwork INTEGER } ipivcLcnVcType OBJECT-TYPE SYNTAX INTEGER { svc(0), pvc(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the type of call, pvc or svc. type is provided at provisioning time." ::= { ipivcLcnVcCadEntry 1 } ipivcLcnVcState OBJECT-TYPE SYNTAX INTEGER { creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4." ::= { ipivcLcnVcCadEntry 2 } ipivcLcnVcPreviousState OBJECT-TYPE SYNTAX INTEGER { creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing." ::= { ipivcLcnVcCadEntry 3 } ipivcLcnVcDiagnosticCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the internal substate of call control. It is used to further refine state of call processing." ::= { ipivcLcnVcCadEntry 4 } ipivcLcnVcPreviousDiagnosticCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the internal substate of call control. It is used to further refine state of call processing." ::= { ipivcLcnVcCadEntry 5 } ipivcLcnVcCalledNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Numbering Plan Indicator (NPI) of the called end." ::= { ipivcLcnVcCadEntry 6 } ipivcLcnVcCalledDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection." ::= { ipivcLcnVcCadEntry 7 } ipivcLcnVcCalledLcn OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information." ::= { ipivcLcnVcCadEntry 8 } ipivcLcnVcCallingNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Numbering Plan Indicator (NPI) of the calling end." ::= { ipivcLcnVcCadEntry 9 } ipivcLcnVcCallingDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Data Network Address (Dna) of the calling end." ::= { ipivcLcnVcCadEntry 10 } ipivcLcnVcCallingLcn OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Logical Channel Number of the calling end." ::= { ipivcLcnVcCadEntry 11 } ipivcLcnVcAccountingEnabled OBJECT-TYPE SYNTAX INTEGER { yes(0), no(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options." ::= { ipivcLcnVcCadEntry 12 } ipivcLcnVcFastSelectCall OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays that this is a fast select call." ::= { ipivcLcnVcCadEntry 13 } ipivcLcnVcLocalRxPktSize OBJECT-TYPE SYNTAX INTEGER { unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the locally negotiated size of send packets." ::= { ipivcLcnVcCadEntry 14 } ipivcLcnVcLocalTxPktSize OBJECT-TYPE SYNTAX INTEGER { unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the locally negotiated size of send packets." ::= { ipivcLcnVcCadEntry 15 } ipivcLcnVcLocalTxWindowSize OBJECT-TYPE SYNTAX Unsigned32 (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the send window size provided on incoming call packets or the default when a call request packet does not explicitly provide the window size." ::= { ipivcLcnVcCadEntry 16 } ipivcLcnVcLocalRxWindowSize OBJECT-TYPE SYNTAX Unsigned32 (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the receive window size provided on incoming call packets or the default when a call request does not explicitly provide the window sizes." ::= { ipivcLcnVcCadEntry 17 } ipivcLcnVcPathReliability OBJECT-TYPE SYNTAX INTEGER { high(0), normal(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the path reliability." ::= { ipivcLcnVcCadEntry 19 } ipivcLcnVcAccountingEnd OBJECT-TYPE SYNTAX INTEGER { callingEnd(0), calledEnd(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record." ::= { ipivcLcnVcCadEntry 20 } ipivcLcnVcPriority OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether the call is a normal or a high priority call." ::= { ipivcLcnVcCadEntry 21 } ipivcLcnVcSegmentSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received." ::= { ipivcLcnVcCadEntry 22 } ipivcLcnVcSubnetTxPktSize OBJECT-TYPE SYNTAX INTEGER { unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the locally negotiated size of the data packets on this Vc." ::= { ipivcLcnVcCadEntry 23 } ipivcLcnVcSubnetTxWindowSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the current send window size of Vc." ::= { ipivcLcnVcCadEntry 24 } ipivcLcnVcSubnetRxPktSize OBJECT-TYPE SYNTAX INTEGER { unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the locally negotiated size of receive packets." ::= { ipivcLcnVcCadEntry 25 } ipivcLcnVcSubnetRxWindowSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the receive window size provided on incoming call packets and to the default when a call request does not explicitly provide the window sizes." ::= { ipivcLcnVcCadEntry 26 } ipivcLcnVcMaxSubnetPktSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the maximum packet size allowed on Vc." ::= { ipivcLcnVcCadEntry 27 } ipivcLcnVcTransferPriorityToNetwork OBJECT-TYPE SYNTAX INTEGER { normal(0), high(9) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the priority in which data is transferred to the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput." ::= { ipivcLcnVcCadEntry 28 } ipivcLcnVcTransferPriorityFromNetwork OBJECT-TYPE SYNTAX INTEGER { normal(0), high(9) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the priority in which data is transferred from the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, and the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, and the routing metric is set to throughput." ::= { ipivcLcnVcCadEntry 29 } ipivcLcnVcIntdTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcLcnVcIntdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued." ::= { ipivcLcnVc 11 } ipivcLcnVcIntdEntry OBJECT-TYPE SYNTAX IpivcLcnVcIntdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ipivcLcnVcIntdTable." INDEX { ipivcIndex, ipivcLcnIndex, ipivcLcnVcIndex } ::= { ipivcLcnVcIntdTable 1 } IpivcLcnVcIntdEntry ::= SEQUENCE { ipivcLcnVcCallReferenceNumber Hex, ipivcLcnVcElapsedTimeTillNow Unsigned32, ipivcLcnVcSegmentsRx Unsigned32, ipivcLcnVcSegmentsSent Unsigned32, ipivcLcnVcStartTime EnterpriseDateAndTime } ipivcLcnVcCallReferenceNumber OBJECT-TYPE SYNTAX Hex (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call." ::= { ipivcLcnVcIntdEntry 1 } ipivcLcnVcElapsedTimeTillNow OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started." ::= { ipivcLcnVcIntdEntry 2 } ipivcLcnVcSegmentsRx OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state." ::= { ipivcLcnVcIntdEntry 3 } ipivcLcnVcSegmentsSent OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet." ::= { ipivcLcnVcIntdEntry 4 } ipivcLcnVcStartTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes." ::= { ipivcLcnVcIntdEntry 5 } ipivcLcnVcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IpivcLcnVcStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** ... Statistics(Stats) This group defines general attributes collected by general Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods." ::= { ipivcLcnVc 12 } ipivcLcnVcStatsEntry OBJECT-TYPE SYNTAX IpivcLcnVcStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ipivcLcnVcStatsTable." INDEX { ipivcIndex, ipivcLcnIndex, ipivcLcnVcIndex } ::= { ipivcLcnVcStatsTable 1 } IpivcLcnVcStatsEntry ::= SEQUENCE { ipivcLcnVcAckStackingTimeouts Unsigned32, ipivcLcnVcOutOfRangeFrmFromSubnet Unsigned32, ipivcLcnVcDuplicatesFromSubnet Unsigned32, ipivcLcnVcFrmRetryTimeouts Unsigned32, ipivcLcnVcPeakRetryQueueSize Unsigned32, ipivcLcnVcPeakOoSeqQueueSize Unsigned32, ipivcLcnVcPeakOoSeqFrmForwarded Unsigned32, ipivcLcnVcPeakStackedAcksRx Unsigned32, ipivcLcnVcSubnetRecoveries Unsigned32, ipivcLcnVcWindowClosuresToSubnet Unsigned32, ipivcLcnVcWindowClosuresFromSubnet Unsigned32, ipivcLcnVcWrTriggers Unsigned32 } ipivcLcnVcAckStackingTimeouts OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of ack stacking timer expiries. It is used as an indicator of the acknowledgment behavior across the subnet when ack stacking is in effect. If it expires often, usually this means end users will experience longer delay. The ack stacking timer specifies how long the Vc will wait before finally sending the subnet acknowledgment. if this attribute is set to a value of 0, then the Vc will automatically return acknowledgment packets without delay. If this attribute is set to a value other than zero, then the Vc will wait for this amount of time in an attempt to piggyback the acknowledgment packet on another credit or data packet. If the Vc cannot piggyback the acknowledgment packet within this time, then the packet is returned without piggybacking." ::= { ipivcLcnVcStatsEntry 1 } ipivcLcnVcOutOfRangeFrmFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of subnet frames discarded due to the sequence number being out of range. Two Categories apply for the General Vc 1) lost Acks (previous Range) 2) unexpected Packets (next Range) Vc internally maintains its own sequence number of packet order and sequencing. Due to packet retransmission, Vc may receive duplicate packets that have the same Vc internal sequence number. Only 1 copy is accepted by the Vc and other copies of the same packets are detected through this count. This attribute can be used to record the frequency of packet retransmission due to Vc and other part of the subnet." ::= { ipivcLcnVcStatsEntry 2 } ipivcLcnVcDuplicatesFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of subnet packets discarded due to duplication. It is used to detect software error fault or duplication caused by retransmitting." ::= { ipivcLcnVcStatsEntry 3 } ipivcLcnVcFrmRetryTimeouts OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames which have retransmission time-out. If packets from Vc into the subnet are discarded by the subnet, the source Vc will not receive any acknowledgment. The retransmission timer then expires and packets will be retransmitted again. Note that the Vc idle probe may be retransmitted and is included in this count. This statistics does not show the distribution of how many times packets are retransmitted (e.g. first retransmission results in successful packet forwarding)." ::= { ipivcLcnVcStatsEntry 4 } ipivcLcnVcPeakRetryQueueSize OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak size of the retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest body of unacknowledged packets." ::= { ipivcLcnVcStatsEntry 5 } ipivcLcnVcPeakOoSeqQueueSize OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak size of the out of sequence queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets." ::= { ipivcLcnVcStatsEntry 6 } ipivcLcnVcPeakOoSeqFrmForwarded OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak size of the sequence packet queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets, which by the receipt of an expected packet have been transformed to expected packets. The number of times this peak is reached is not recorded as it is traffic dependent." ::= { ipivcLcnVcStatsEntry 7 } ipivcLcnVcPeakStackedAcksRx OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak size of wait acks. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest collective acknowledgment." ::= { ipivcLcnVcStatsEntry 8 } ipivcLcnVcSubnetRecoveries OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of successful Vc recovery attempts. This attribute is used as an indicator of how many times the Vc path is broken but can be recovered. This attribute is useful to record the number of network path failures." ::= { ipivcLcnVcStatsEntry 9 } ipivcLcnVcWindowClosuresToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of window closures to subnet. A packet may have been sent into the subnet but its acknowledgment from the remote Vc has not yet been received. This is a 8 bit sequence number.This number is useful in detecting whether the Vc is sending any packet into the subnet." ::= { ipivcLcnVcStatsEntry 10 } ipivcLcnVcWindowClosuresFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of window closures from subnet. This attribute is useful in detecting whether the Vc is receiving any packet from the subnet." ::= { ipivcLcnVcStatsEntry 11 } ipivcLcnVcWrTriggers OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of times the Vc stays within the W-R region. The W-R region is a value used to determined the timing of credit transmission. Should the current window size be beneath this value, the credits will be transmitted immediately. Otherwise, they will be transmitted later with actual data. The wrTriggers statistic is therefore used to analyze the flow control and credit mechanism." ::= { ipivcLcnVcStatsEntry 12 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { ipivcDrComponentName, -- ipivcLcnStorageType, -- ipivcDnaPacketSizes, -- ipivcIpAddress, -- ipivcLcnVcDuplicatesFromSubnet, -- ipivcLcnVcStartTime, -- ipivcLcnControlStatus, -- ipivcLcnAdminState, -- ipivcLcnVcDiagnosticCode, -- ipivcDnaDefaultRecvFrmNetworkWindowSize, -- ipivcStorageType, -- ipivcDnaDefaultRecvFrmNetworkPacketSize, -- ipivcComponentName, -- ipivcLcnRowStatus, -- ipivcLcnVcLocalRxWindowSize, -- ipivcLcnVcCallingLcn, -- ipivcLcnVcWindowClosuresToSubnet, -- ipivcLcnVcOutOfRangeFrmFromSubnet, -- ipivcLcnDiscardRcvPackets, -- ipivcDnaCugStorageType, -- ipivcLcnVcCalledDna, -- ipivcLcnUsageState, -- ipivcLcnVcType, -- ipivcDnaCugPrivileged, -- ipivcLcnVcAccountingEnabled, -- ipivcLcnVcSegmentsSent, -- ipivcDnaCugIncCalls, -- ipivcDnaCugOutCalls, -- ipivcDnaCugDnic, -- ipivcDnaIncIntlReverseCharge, -- ipivcLcnVcPreviousState, -- ipivcMaximumNumberOfLcn, -- ipivcLcnVcSubnetRecoveries, -- ipivcDrRowStatus, -- ipivcDnaNumberingPlanIndicator, -- ipivcDrStorageType, -- ipivcDnaDataNetworkAddress, -- ipivcLcnIpInterfaceDevice, -- ipivcLcnOperationalState, -- ipivcDnaDefaultSendToNetworkThruputClass, -- ipivcDnaIncHighPriorityReverseCharge, -- ipivcLcnVcSegmentSize, -- ipivcDnaCugRowStatus, -- ipivcLcnPacketsSent, -- ipivcDnaPacketSizeNegotiation, -- ipivcLcnVcCalledLcn, -- ipivcLcnDiscardTxPackets, -- ipivcLcnVcComponentName, -- ipivcLcnPacketsReceived, -- ipivcLcnVcFastSelectCall, -- ipivcLcnVcPeakOoSeqQueueSize, -- ipivcLcnVcWindowClosuresFromSubnet, -- ipivcDnaCug0AsNonCugCall, -- ipivcDnaFastSelectCallsOnly, -- ipivcDnaIncIntlNormalCharge, -- ipivcLcnAvailabilityStatus, -- ipivcLcnVcSubnetTxWindowSize, -- ipivcDnaIncNormalPriorityReverseCharge, -- ipivcDnaDefaultSendToNetworkWindowSize, -- ipivcLcnAlarmStatus, -- ipivcLcnVcAckStackingTimeouts, -- ipivcLcnVcPriority, -- ipivcLcnVcPathReliability, -- ipivcDnaDefaultSendToNetworkPacketSize, -- ipivcDnaComponentName, -- ipivcDnaAccountClass, -- ipivcDrCallingNumberingPlanIndicator, -- ipivcLcnVcCallReferenceNumber, -- ipivcLcnVcLocalTxWindowSize, -- ipivcLcnVcState, -- ipivcRowStatus, -- ipivcDnaOutCalls, -- ipivcLcnVcSubnetRxWindowSize, -- ipivcLcnVcPeakStackedAcksRx, -- ipivcLcnVcStorageType, -- ipivcLcnProceduralStatus, -- ipivcDnaStorageType, -- ipivcDrCallingDataNetworkAddress, -- ipivcDnaDefaultTransferPriority, -- ipivcLcnVcAccountingEnd, -- ipivcLcnVcSubnetTxPktSize, -- ipivcLcnVcCalledNpi, -- ipivcLcnVcElapsedTimeTillNow, -- ipivcLcnComponentName, -- ipivcDnaCugFormat, -- ipivcLcnVcTransferPriorityToNetwork, -- ipivcDnaCugType, -- ipivcLcnDestinationIpAddress, -- ipivcLcnVcRowStatus, -- ipivcDnaIncCalls, -- ipivcDnaIncFastSelect, -- ipivcDnaIncAccess, -- ipivcLcnVcLocalTxPktSize, -- ipivcLcnVcPreviousDiagnosticCode, -- ipivcLcnVcCallingNpi, -- ipivcLcnVcSubnetRxPktSize, -- ipivcLcnVcWrTriggers, -- ipivcDrCallingIpAddress, -- ipivcDnaRowStatus, -- ipivcLcnVcCallingDna, -- ipivcLcnVcPeakRetryQueueSize, -- ipivcDnaIncChargeTransfer, -- ipivcLcnVcPeakOoSeqFrmForwarded, -- ipivcLcnVcSegmentsRx, -- ipivcLcnVcFrmRetryTimeouts, -- ipivcDnaTransferPriorityOverRide, -- ipivcDnaCugComponentName, -- ipivcDnaIncSameService, -- ipivcDnaDefaultRecvFrmNetworkThruputClass, -- ipivcDnaCugInterlockCode, -- ipivcLcnVcLocalRxPktSize, -- ipivcDnaServiceExchange, -- ipivcDnaServiceCategory, -- ipivcLcnUnknownStatus, -- ipivcLcnStandbyStatus, -- ipivcLcnVcTransferPriorityFromNetwork, -- ipivcLcnVcMaxSubnetPktSize } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." ipiVcGroup OBJECT IDENTIFIER ::= { ipiVcMIB 1 } ipiVcGroupBE OBJECT IDENTIFIER ::= { ipiVcGroup 5 } ipiVcGroupBE01 OBJECT IDENTIFIER ::= { ipiVcGroupBE 2 } ipiVcGroupBE01A OBJECT IDENTIFIER ::= { ipiVcGroupBE01 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 IpiVc." -- STATUS mandatory -- DESCRIPTION "IpiVc MIB: MIB Version BE01A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-IpiVcMIB -- INCLUDES { ipiVcGroupBE01A } ipiVcCapabilities OBJECT IDENTIFIER ::= { ipiVcMIB 3 } ipiVcCapabilitiesBE OBJECT IDENTIFIER ::= { ipiVcCapabilities 5 } ipiVcCapabilitiesBE01 OBJECT IDENTIFIER ::= { ipiVcCapabilitiesBE 2 } ipiVcCapabilitiesBE01A OBJECT IDENTIFIER ::= { ipiVcCapabilitiesBE01 2 } END