| trkUnAckedIndex |
.1.3.6.1.4.1.562.2.4.1.60.2.1.1.10 |
|
This variable represents the index for the trkUnAcked tables.
|
| trkUnAckedRowStatus |
.1.3.6.1.4.1.562.2.4.1.60.2.1.1.1 |
|
This variable is used as the basis for SNMP naming of
trkUnAcked components.
These components can be added and deleted.
|
| trkUnAckedComponentName |
.1.3.6.1.4.1.562.2.4.1.60.2.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| trkUnAckedStorageType |
.1.3.6.1.4.1.562.2.4.1.60.2.1.1.4 |
|
This variable represents the storage type value for the
trkUnAcked tables.
|
| trkUnAckedMaximumErroredInterval |
.1.3.6.1.4.1.562.2.4.1.60.2.10.1.1 |
|
This attribute specifies the interval time over which the error
threshold (as specified by receiveErrorSensitivity) must be
continuously exceeded before the Unacknowledged, Utp, or
FrAccess component can be degraded. Once the error interval count
exceeds the provisioned value, the Unacknowledged, Utp, or
FrAccess component issues an alarm indicating that link quality has
degraded, and it disables its parent component. The exception to
this is a value of zero, the default, which indicates that the
mechanism is completely disabled.
|
| trkUnAckedReceiveErrorSensitivity |
.1.3.6.1.4.1.562.2.4.1.60.2.10.1.2 |
|
This attribute is the allowable error rate beyond which the
Unacknowledged, Utp, or FrAccess component can be degraded if it
persists for a duration longer than the maximumErrorInterval. The
threshold is expressed as a percentage of number of errored frames
in the last interval per number of frames received in the last interval.
The exception to this is a value of zero, which indicates that the
mechanism is completely disabled. The configurable values are:
0 = the mechanism is completely disabled
1 = 1/(2**1)
2 = 1/(2**2)
3 = 1/(2**3)
:
10 = 1/(2**10)
|
| trkUnAckedAdminState |
.1.3.6.1.4.1.562.2.4.1.60.2.11.1.1 |
|
This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.
|
| trkUnAckedOperationalState |
.1.3.6.1.4.1.562.2.4.1.60.2.11.1.2 |
|
This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.
|
| trkUnAckedUsageState |
.1.3.6.1.4.1.562.2.4.1.60.2.11.1.3 |
|
This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.
|
| trkUnAckedAvailabilityStatus |
.1.3.6.1.4.1.562.2.4.1.60.2.11.1.4 |
|
If supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)
|
| trkUnAckedProceduralStatus |
.1.3.6.1.4.1.562.2.4.1.60.2.11.1.5 |
|
If supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)
|
| trkUnAckedControlStatus |
.1.3.6.1.4.1.562.2.4.1.60.2.11.1.6 |
|
If supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)
|
| trkUnAckedAlarmStatus |
.1.3.6.1.4.1.562.2.4.1.60.2.11.1.7 |
|
If supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)
|
| trkUnAckedStandbyStatus |
.1.3.6.1.4.1.562.2.4.1.60.2.11.1.8 |
|
If supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.
|
| trkUnAckedUnknownStatus |
.1.3.6.1.4.1.562.2.4.1.60.2.11.1.9 |
|
This attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.
|
| trkUnAckedFramerIndex |
.1.3.6.1.4.1.562.2.4.1.60.2.2.1.1.10 |
|
This variable represents the index for the trkUnAckedFramer tables.
|
| trkUnAckedFramerRowStatus |
.1.3.6.1.4.1.562.2.4.1.60.2.2.1.1.1 |
|
This variable is used as the basis for SNMP naming of
trkUnAckedFramer components.
These components cannot be added nor deleted.
|
| trkUnAckedFramerComponentName |
.1.3.6.1.4.1.562.2.4.1.60.2.2.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| trkUnAckedFramerStorageType |
.1.3.6.1.4.1.562.2.4.1.60.2.2.1.1.4 |
|
This variable represents the storage type value for the
trkUnAckedFramer tables.
|
| trkUnAckedFramerInterfaceName |
.1.3.6.1.4.1.562.2.4.1.60.2.2.10.1.1 |
|
This attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run.
|
| trkUnAckedFramerFramingType |
.1.3.6.1.4.1.562.2.4.1.60.2.2.11.1.1 |
|
This attribute specifies the type of framing protocol that will be
used for frames transmitted to the link interface and received from
the link interface. If the value of this attribute is set to the default
interrupting, then a Proprietary hdlc protocol is used which allows
for voice cells to interrupt transmission of data frames, transmit the
voice cell, and then continue transmitting the data frame. If the
value of this attribute is set to hdlc, then the standard hdlc procotol
is used for the sequential transmission of individual frames.
|
| trkUnAckedFramerDataInversion |
.1.3.6.1.4.1.562.2.4.1.60.2.2.11.1.2 |
|
This attribute determines whether data bits are to be inverted (1 to 0
and 0 to 1) before transmission of frames to the interface. If the
value of this attribute is On, the incoming data bits will also be
inverted when frames are received from the link before being
processed.
This option is typically used in hdlc framing mode when inversion
is used to guarantee 1's density.
Note that aborts (in hdlc and interrupting modes) are corrupted
when data is inverted.
|
| trkUnAckedFramerFrameCrcType |
.1.3.6.1.4.1.562.2.4.1.60.2.2.11.1.3 |
|
This attribute defines the type of CRC used.
The CRC value calculated is appended to the end of the frames
transmitted to the link. The CRC value is removed from the end of
frames received from the link and checked for correctness.
NoCrc means that CRC is not used.
|
| trkUnAckedFramerFlagsBetweenFrames |
.1.3.6.1.4.1.562.2.4.1.60.2.2.11.1.4 |
|
This attribute defines the number of flags that are inserted between
frames sent to the link interface.
|
| trkUnAckedFramerAdminState |
.1.3.6.1.4.1.562.2.4.1.60.2.2.12.1.1 |
|
This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
|
| trkUnAckedFramerOperationalState |
.1.3.6.1.4.1.562.2.4.1.60.2.2.12.1.2 |
|
This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
|
| trkUnAckedFramerUsageState |
.1.3.6.1.4.1.562.2.4.1.60.2.2.12.1.3 |
|
This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
|
| trkUnAckedFramerFrmFromIf |
.1.3.6.1.4.1.562.2.4.1.60.2.2.13.1.2 |
|
The number of frames received from the link interface by Framer.
|
| trkUnAckedFramerOctetFromIf |
.1.3.6.1.4.1.562.2.4.1.60.2.2.13.1.3 |
|
The number of bytes received from the link interface by Framer.
|
| trkUnAckedFramerAborts |
.1.3.6.1.4.1.562.2.4.1.60.2.2.13.1.4 |
|
This attribute is the total number of aborts received.
|
| trkUnAckedFramerCrcErrors |
.1.3.6.1.4.1.562.2.4.1.60.2.2.13.1.5 |
|
This attribute is the total number of frames with with CRC errors.
|
| trkUnAckedFramerLrcErrors |
.1.3.6.1.4.1.562.2.4.1.60.2.2.13.1.6 |
|
This attribute is the total number of frames with LRC errors.
|
| trkUnAckedFramerNonOctetErrors |
.1.3.6.1.4.1.562.2.4.1.60.2.2.13.1.7 |
|
This attribute is the total number of frames that were non octet
aligned.
|
| trkUnAckedFramerOverruns |
.1.3.6.1.4.1.562.2.4.1.60.2.2.13.1.8 |
|
This attribute is the total number of frames received from the link
for which overruns occurred.
|
| trkUnAckedFramerUnderruns |
.1.3.6.1.4.1.562.2.4.1.60.2.2.13.1.9 |
|
This attribute is the total number of frames transmitted to the link
for which underruns occurred.
|
| trkUnAckedFramerLargeFrmErrors |
.1.3.6.1.4.1.562.2.4.1.60.2.2.13.1.10 |
|
This attribute is the total number of frames received which were too
large. The frame execeeded the maximumFrameLengthLimit
provisioned attribute or it contained more than the 255 block
hardware limit.
|
| trkUnAckedFramerFrmModeErrors |
.1.3.6.1.4.1.562.2.4.1.60.2.2.13.1.11 |
|
This attribute is the total number of frames detected with framing
mode errors. A framingModeError is flagged when frames are
inconsistent with the specified framingType, that is when
interrupting frames are used while running in hdlc mode.
|
| trkUnAckedFramerOutOfSequenceFrm |
.1.3.6.1.4.1.562.2.4.1.60.2.2.13.1.12 |
|
This attribute is the total number of out of sequence frames in
interrupting mode that have been received from the link.
|
| trkUnAckedFramerRepeatedFrm |
.1.3.6.1.4.1.562.2.4.1.60.2.2.13.1.13 |
|
This attribute is the total number of repeated frames (frames with
the same sequence number) in interrupting mode that have been
received from the link.
|
| trkUnAckedFramerNormPrioLinkUtilToIf |
.1.3.6.1.4.1.562.2.4.1.60.2.2.14.1.1 |
|
This attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) sent to the link as a percentage of the
available bandwidth on the link. Note that this includes traffic with
Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2
and 3. The utilization is the average for the last minute.
|
| trkUnAckedFramerHighPrioLinkUtilToIf |
.1.3.6.1.4.1.562.2.4.1.60.2.2.14.1.2 |
|
This attribute is the utilization of the interrupting priority data traffic
sent to the link as a percentage of the available bandwidth on the
link. Note that this includes traffic with a Transfer Priority (TP) of
11 and/or Emission Priority of 1. The utilization is the average for
the last minute.
|
| trkUnAckedFramerNormPrioLinkUtilFromIf |
.1.3.6.1.4.1.562.2.4.1.60.2.2.14.1.3 |
|
This attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) received from the link as a percentage
of the available bandwidth on the link. Note that this includes traffic
with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority
of 2 and 3. The utilization is the average for the last minute.
|
| trkUnAckedFramerHighPrioLinkUtilFromIf |
.1.3.6.1.4.1.562.2.4.1.60.2.2.14.1.4 |
|
This attribute is the utilization of the interrupting priority data
(interrupting traffic) received from the link as a percentage of the
available bandwidth on the link. Note that this includes traffic with
a Transfer Priority (TP) of 11 and/or Emission Priority of 1. The
utilization is the average for the last minute.
|
| trkUnAckedFramerMinorLinkUtilAlarmThreshold |
.1.3.6.1.4.1.562.2.4.1.60.2.2.15.1.1 |
|
This attribute provides the threshold value which defines when a
minor alarm would be issued, denoting a sustained total average
link utilization. The total average link utilization is calculated based
on the number of received bytes. The Set alarm is issued after 3
minutes of utilization greater than the given threshold. The
corresponding Clear alarm is issued after a subsequent 3 minutes of
utilization less than or equal to the given threshold.
The value 100% is used to disable an individual threshold. For
values other than 100%, a semantic check ensures that the minor
alarm threshold is less than the other thresholds.
|
| trkUnAckedFramerMajorLinkUtilAlarmThreshold |
.1.3.6.1.4.1.562.2.4.1.60.2.2.15.1.2 |
|
This attribute provides the threshold value which defines when a
major alarm would be issued, denoting a sustained total average
link utilization. The total average link utilization is calculated based
on the number of received bytes. The Set alarm is issued after 3
minutes of utilization greater than the given threshold. The
corresponding Clear alarm is issued after a subsequent 3 minutes of
utilization less than or equal to the given threshold.
The value 100% is used to disable an individual threshold. For
values other than 100%, a semantic check ensures that the major
alarm threshold is greater than the minor threshold and less than the
critical threshold.
|
| trkUnAckedFramerCriticalLinkUtilAlarmThreshold |
.1.3.6.1.4.1.562.2.4.1.60.2.2.15.1.3 |
|
This attribute provides the threshold value which defines when a
critical alarm would be issued, denoting a sustained total average
link utilization. The total average link utilization is calculated based
on the number of received bytes. The Set alarm is issued after 3
minutes of utilization greater than the given threshold. The
corresponding Clear alarm is issued after a subsequent 3 minutes of
utilization less than or equal to the given threshold.
The value 100% is used to disable an individual threshold. For
values other than 100%, a semantic check ensures that the critical
alarm threshold is greater than the other thresholds.
|
| trkUnAckedFramerLinkUtilAlarmStatus |
.1.3.6.1.4.1.562.2.4.1.60.2.2.15.1.4 |
|
This attribute provides control of the generation of link utilization
alarms. If the value is disabled, none of the alarms are generated
(this is equivalent to setting all of the thresholds to 100%). If the
value is enabled, the individual thresholds are handled.
|
