APPLETALK-MIB device MIB details by RFC

APPLETALK-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing APPLETALK-MIB.

Vendor:	RFC
Mib:	APPLETALK-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- WinAgents MIB Extraction Wizard
-- Extracted from rfc1742.txt 16.03.2005 20:20:21

APPLETALK-MIB DEFINITIONS ::= BEGIN

IMPORTS
    Counter, IpAddress, TimeTicks
        FROM RFC1155-SMI
    DisplayString, mib-2
        FROM RFC1213-MIB
    OBJECT-TYPE
        FROM RFC-1212;

--  This MIB module uses the extended OBJECT-TYPE macro as
--  defined in RFC-1212.

--  The following reference is used in this MIB:
--  [Inside AppleTalk]
--  This refers to Gursharan S. Sidhu, Richard F. Andrews, and
--  Alan B. Oppenheimer, Inside AppleTalk, Second Edition,
--  Addison Wesley, (1990).



--  AppleTalk MIB

    appletalk    OBJECT IDENTIFIER ::= { mib-2 13 }


        ATNetworkNumber ::=         -- 2 octets of net number
                                    -- in network byte order
                OCTET STRING (SIZE (2))

        DdpNodeAddress ::=          -- 2 octets of net number
                                    -- in network byte order,
                                    -- 1 octet of node number
                OCTET STRING (SIZE (3))

        DdpSocketAddress ::=        -- 2 octets of net number
                                    -- in network byte order,
                                    -- 1 octet of node number,

                                    -- 1 octet of socket number
                                    -- (0..255)
                OCTET STRING (SIZE (4))

        ATName ::=              -- 0 to 32 octets of AppleTalk
                                    -- ASCII [Inside AppleTalk]
                OCTET STRING (SIZE (0..32))


    llap         OBJECT IDENTIFIER ::= { appletalk 1 }
    aarp         OBJECT IDENTIFIER ::= { appletalk 2 }
    atport       OBJECT IDENTIFIER ::= { appletalk 3 }
    ddp          OBJECT IDENTIFIER ::= { appletalk 4 }
    rtmp         OBJECT IDENTIFIER ::= { appletalk 5 }
    kip          OBJECT IDENTIFIER ::= { appletalk 6 }
    zipRouter    OBJECT IDENTIFIER ::= { appletalk 7 }
    nbp          OBJECT IDENTIFIER ::= { appletalk 8 }
    atecho       OBJECT IDENTIFIER ::= { appletalk 9 }
    atp          OBJECT IDENTIFIER ::= { appletalk 10 }
    pap          OBJECT IDENTIFIER ::= { appletalk 11 }
    asp          OBJECT IDENTIFIER ::= { appletalk 12 }
    adsp         OBJECT IDENTIFIER ::= { appletalk 13 }
    atportptop   OBJECT IDENTIFIER ::= { appletalk 14 }
    rtmpStub     OBJECT IDENTIFIER ::= { appletalk 16 }
    zipEndNode   OBJECT IDENTIFIER ::= { appletalk 17 }
    perPort  OBJECT IDENTIFIER ::= { appletalk 18 }


-- The LLAP Group
--
-- Implementation of this group is mandatory for all
-- entities that implement LLAP
--
-- Notes for the interfaces group
--
-- When implementing the Interfaces Group of MIB-II, it is
-- suggested that the following values be used for any
-- LocalTalk interfaces:
--  ifMtu: 600
--  ifSpeed: 230000
--  ifPhysAddress: the one octet node number for the
--      particular interface
--
-- Note also that LLAP control packets should not be
-- included in the Interfaces Group packet or octet
-- counters.



llapTable OBJECT-TYPE
    SYNTAX SEQUENCE OF LlapEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The list of LLAP entries."
    ::= { llap 1 }

llapEntry OBJECT-TYPE
    SYNTAX LlapEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An LLAP entry containing objects for the LocalTalk
        Link Access Protocol for a particular LocalTalk
        interface.

        As an example, an instance of the llapOutPkts object
        might be named llapOutPks.1"
    INDEX { llapIfIndex }
    ::= { llapTable 1 }

LlapEntry ::= SEQUENCE {
    llapIfIndex             INTEGER,
    llapInPkts              Counter,
    llapOutPkts             Counter,
    llapInNoHandlers        Counter,
    llapInLengthErrors      Counter,
    llapInErrors            Counter,
    llapCollisions          Counter,
    llapDefers              Counter,
    llapNoDataErrors        Counter,
    llapRandomCTSErrors     Counter,
    llapFCSErrors           Counter
}

llapIfIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The LLAP interface to which this entry pertains.
        The interface identified by a particular value of
        this index is the same interface as identified
        by the same value of ifIndex."
    ::= { llapEntry 1 }



-- this object has been deprecated because it duplicates the
-- sum of the MIB-II variables ifInUcastPkts and
-- ifInNUcastPkts

llapInPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS deprecated
    DESCRIPTION
        "The total number of good data packets received on
        this LocalTalk interface."
    ::= { llapEntry 2 }

-- this object has been deprecated because it duplicates the
-- sum of the MIB-II variables ifOutUcastPkts and
-- ifOutNUcastPkts

llapOutPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS deprecated
    DESCRIPTION
        "The total number of data packets transmitted on
        this LocalTalk interface."
    ::= { llapEntry 3 }

-- this object has been deprecated because it duplicates the
-- MIB-II variable ifInUnknownProtos

llapInNoHandlers OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS deprecated
    DESCRIPTION
        "The total number of good packets received on this
        LocalTalk interface for which there was no protocol
        handler."
    ::= { llapEntry 4 }

llapInLengthErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of packets received on this LocalTalk
        interface whose actual length did not match the length
        in the header."
    ::= { llapEntry 5 }

-- this object has been deprecated because it duplicates the
-- MIB-II variable ifInErrors

llapInErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS deprecated
    DESCRIPTION
        "The total number of packets containing errors received
        on this LocalTalk interface."
    ::= { llapEntry 6 }

llapCollisions OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of collisions assumed on this
        LocalTalk interface due to the lack of a lapCTS reply."
    ::= { llapEntry 7 }

llapDefers OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of times this LocalTalk interface
        deferred to other packets."
    ::= { llapEntry 8 }

llapNoDataErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of times this LocalTalk interface
        received a lapRTS packet and expected a data packet,
        but did not receive any data packet."
    ::= { llapEntry 9 }

llapRandomCTSErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of times this LocalTalk interface
        received a lapCTS packet that was not solicited by a
        lapRTS packet."

    ::= { llapEntry 10 }

llapFCSErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of times this LocalTalk interface
        received a packet with an FCS (Frame Check Sequence)
        error."
    ::= { llapEntry 11 }


-- The AARP Group
--
-- Implementation of this group is mandatory for all entities
-- that implement AARP

aarpTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AarpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The AppleTalk Address Translation Table contains an
        equivalence of AppleTalk Network Addresses to the link
        layer physical address."
    ::= { aarp 1 }

aarpEntry OBJECT-TYPE
    SYNTAX AarpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry contains one AppleTalk Network Address to
        physical address equivalence.

        As an example, an instance of the aarpPhysAddress
        object might be named aarpPhysAddress.1.0.80.234"
    INDEX { aarpIfIndex, aarpNetAddress }
    ::= { aarpTable 1 }

AarpEntry ::= SEQUENCE {
    aarpIfIndex     INTEGER,
    aarpPhysAddress OCTET STRING,
    aarpNetAddress  DdpNodeAddress,
    aarpStatus      INTEGER
}


aarpIfIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The interface on which this entry's equivalence is
        effective.  The interface identified by a particular
        value of this index is the same interface as
        identified by the same value of ifIndex."
    ::= { aarpEntry 1 }

aarpPhysAddress OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The media-dependent physical address."
    ::= { aarpEntry 2 }

aarpNetAddress OBJECT-TYPE
    SYNTAX DdpNodeAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The AppleTalk Network Address corresponding to the
        media-dependent physical address."
    ::= { aarpEntry 3 }

aarpStatus OBJECT-TYPE
    SYNTAX INTEGER {
        valid(1),
        invalid(2)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this AARP entry.
        Setting this object to the value invalid(2) has the
        effect of invalidating the corresponding entry in the
        aarpTable.  That is, it effectively disassociates
        the mapping identified with said entry.  It is an
        implementation-specific matter as to whether the agent
        removes an invalidated entry from the table.
        Accordingly, management stations must be prepared to
        receive from agents tabular information corresponding
        to entries not currently in use.  Proper
        interpretation of such entries requires examination
        of the relevant aarpStatus object."

    ::= { aarpEntry 4 }

aarpLookups OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times the AARP cache for this entity
        was searched."
    ::= { aarp 2 }

aarpHits OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times an entry was searched for and
        found in the AARP cache for this entity."
    ::= { aarp 3 }


-- The ATPort Group
--
-- Implementation of this group is mandatory for all entities
-- that implement AppleTalk ports
--
-- Note that to be compliant with this group, all variables
-- that have read-write access must be implemented as
-- read-write.

atportTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AtportEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of AppleTalk ports for this entity."
    ::= { atport 1 }

atportEntry OBJECT-TYPE
    SYNTAX AtportEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The description of one of the AppleTalk
        ports on this entity.

        As an example, an instance of the atportNetFrom object
        might be named atportNetFrom.2"

    INDEX { atportIndex }
    ::= { atportTable 1 }

AtportEntry ::= SEQUENCE {
    atportIndex               INTEGER,
    atportDescr               DisplayString,
    atportType                INTEGER,
    atportNetStart            ATNetworkNumber,
    atportNetEnd              ATNetworkNumber,
    atportNetAddress          DdpNodeAddress,
    atportStatus              INTEGER,
    atportNetConfig           INTEGER,
    atportZoneConfig          INTEGER,
    atportZoneDefault         ATName,
    atportIfIndex             INTEGER,
    atportNetFrom             DdpNodeAddress,
    atportZoneFrom            DdpNodeAddress,
    atportInPkts              Counter,
    atportOutPkts             Counter,
    atportHome                INTEGER,
    atportCurrentZone         ATName,
    atportConflictPhysAddr    OCTET STRING
}

atportIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A unique value for each AppleTalk port.
        Its value is between 1 and the total number of
        AppleTalk ports.  The value for each port must
        remain constant at least from the re-initialization
        of the entity's network management system to the
        next re-initialization."
    ::= { atportEntry 1 }

atportDescr OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "A text string containing information about the
        port.  This string is intended for presentation
        to a human; it must not contain anything but printable
        ASCII characters."
    ::= { atportEntry 2 }


-- Several objects throughout the MIB key off of atportType to
-- determine the format of OCTET STRING addresses of peers.
-- The address formats are as follows:
--     localtalk, ethertalk1, ethertalk2, tokentalk, iptalk,
--       fdditalk, smdstalk, arctalk, and virtual take the
--       format of DdpNodeAddress
--     serialPPP: null OCTET STRING
--     serialNonstandard: vendor specific
--     aurp: see AURP MIB to determine format
--     frameRelay: 32 bit DLCI in network byte order
--       (OCTET STRING (SIZE (4)))
--     x25: X121Address (see RFC 1382)
--     ip: IP address (OCTET STRING (SIZE (4)))
--     osi: NSAP (OCTET STRING (SIZE (3..20)))
--     decnetIV: 6 bit area, 10 bit host in network byte order
--       (OCTET STRING (SIZE (2)))
--     arap: ???
--     nonAppleTalk3Com: based on ifType
--     ipx: 32 bit network number in network byte order
--       followed by datalink address of host
--     arns: 32 bit ARNS header
--     hdlc: DdpNodeAddress or null OCTET STRING

atportType OBJECT-TYPE
    SYNTAX INTEGER {
         other(1),       -- none of the following
         localtalk(2),
         ethertalk1(3),
         ethertalk2(4),
         tokentalk(5),
         iptalk(6),
         serialPPP(7),
         serialNonstandard(8),
         virtual(9),    -- an internal interface
         fdditalk(10),
         arctalk(11),
         smdstalk(12),
         aurp(13),
         frameRelay(14),
         x25(15),
         ip(16),
         osi(17),
         decnetIV(18),
         arap(19),
         isdnInThePacketMode(20),
         nonAppleTalk3Com(21),
         ipx(22),
         arns(23),

         hdlc(24)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The type of port, distinguished by the protocol
        immediately below DDP in the protocol stack."
    ::= { atportEntry 3 }

atportNetStart OBJECT-TYPE
    SYNTAX ATNetworkNumber
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The first AppleTalk network address in the range
        configured for this port.  If this port is not a
        native AppleTalk port, this object shall have the
        value of two octets of zero."
    ::= { atportEntry 4 }

atportNetEnd OBJECT-TYPE
    SYNTAX ATNetworkNumber
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The last AppleTalk network address in the range
        configured for this port.  If the network to which
        this AppleTalk port is connected is a non-extended
        network, or if it is not a native AppleTalk port,
        the value for atportNetEnd shall be two octets of
        zero."
    ::= { atportEntry 5 }

atportNetAddress OBJECT-TYPE
    SYNTAX DdpNodeAddress
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The AppleTalk network address configured for this
        port.  In addition, this value may be used as a hint
        for an initial node number used during node-finding.
        If this port is not a native AppleTalk port, this
        object shall have the value of three octets of zero."
    ::= { atportEntry 6 }

atportStatus OBJECT-TYPE
    SYNTAX INTEGER {
         routing(1), --this port is fully configured & routing

         unconfigured(2),
         off(3),
         invalid(4),
         endNode(5), -- this port is acting as an end node
         offDueToConflict(6), -- port is off due to
                      -- configuration conflict
         other(7) -- none of the states defined above
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The configuration status of this port.

        Setting this object to the value invalid(4) has the
        effect of invalidating the corresponding entry in the
        atportTable.  That is, it effectively disassociates the
        mapping identified with said entry.  It is an
        implementation-specific matter as to whether the agent
        removes an invalidated entry from the table.
        Accordingly, management stations must be prepared to
        receive from agents tabular information corresponding
        to entries not currently in use.  Proper
        interpretation of such entries requires examination
        of the relevant atportStatus object."
    ::= { atportEntry 7 }

atportNetConfig OBJECT-TYPE
    SYNTAX INTEGER {
        conflictOrientedSeed(1),  -- use configured network
              -- range even if it conflicts with another
              -- AppleTalk device
        garnered(2), -- acquire from another AppleTalk device
        guessed(3),  -- generate a "random" network range
        unconfigured(4), -- no other value applies
        conflictAverseSeed(5),  -- use configured network
              -- range, but don't come up if it conflicts
        softSeed(6)  -- attempt to use configured network
              -- range, but use network range from another
              -- router if our configuration conflicts
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of the network information for this port.
        If this port is not a native AppleTalk port, this
        object shall have the value unconfigured(4)."
    ::= { atportEntry 8 }


atportZoneConfig OBJECT-TYPE
    SYNTAX INTEGER {
        conflictOrientedSeed(1), -- use configured zone
             -- information even if it conflicts with
             -- another AppleTalk device
        garnered(2), -- acquire from another AppleTalk device
        guessed(3),  -- generate "random" zone information
        unconfigured(4), -- no other value applies
        conflictAverseSeed(5),  -- use configured zone
              -- information, but don't come up if it
              -- conflicts
        softSeed(6)  -- attempt to use configured zone
              -- information, but use zone information
              -- from another router if our configuration
              -- conflicts
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of the zone information for this port.
        If this port is not a native AppleTalk port, this
        object shall have the value unconfigured(4)."
    ::= { atportEntry 9 }

atportZoneDefault OBJECT-TYPE
    SYNTAX ATName
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The name of the default zone for this port.  If
        this port only has one zone, that zone is
        represented here. If this port is not a native
        AppleTalk port, this object shall contain an octet
        string of zero length.

        When this value is changed in a router, the router
        must send a zipNotify packet on the associated
        network."
    ::= { atportEntry 10 }

atportIfIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The physical interface associated with this
        AppleTalk port.  The interface identified by a
        particular value of this index is the same interface

        as identified by the same value of ifIndex."
    ::= { atportEntry 11 }

atportNetFrom OBJECT-TYPE
    SYNTAX DdpNodeAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "When atportNetConfig is set to garnered(2), this
        variable contains the DDP address of an entity from
        which the AppleTalk network number was garnered.
        When atportNetConfig is set to
        conflictOrientedSeed(1), conflictAverseSeed(5),
        or softSeed(6), this variable contains the DDP
        address of an entity which confirmed or supplied our
        AppleTalk network number, for example by replying to
        a ZIP GetNetInfo request.

        If atportNetConfig is set to guessed(3) or
        unconfigured(4), or if the entity has not received
        any network number confirmation, this variable
        should be set to three octets of zero."
    ::= { atportEntry 12 }

atportZoneFrom OBJECT-TYPE
    SYNTAX DdpNodeAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "When atportZoneConfig is set to garnered(2), this
        variable contains the DDP address of an entity from
        which the AppleTalk zone list was garnered.

        When atportZoneConfig is set to
        conflictOrientedSeed(1), conflictAverseSeed(5), or
        softSeed(6), this variable contains the DDP address
        of an entity which confirmed or supplied our
        AppleTalk zone information, for example by replying
        to a ZIP GetNetInfo request or a ZIP Query.

        If atportZoneConfig is set to guessed(3) or
        unconfigured(4), or if the entity has not received
        any zone confirmation, this variable should be set
        to three octets of zero."
    ::= { atportEntry 13 }




atportInPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of packets received by this entity on
        this port."
    ::= { atportEntry 14 }

atportOutPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of packets transmitted by this entity on
        this port."
    ::= { atportEntry 15 }

atportHome OBJECT-TYPE
    SYNTAX INTEGER {
        home(1),
        notHome(2)
    }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An indication of whether or not the entity is
        homed on this port, that is to say, a port on which
        the entity could perform NBP registrations for
        services that it chooses to advertise."
    ::= { atportEntry 16 }

atportCurrentZone OBJECT-TYPE
    SYNTAX ATName
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The current zone for the port.  In general, this is
        the zone name in which services on this port will
        be registered.  If this port is not a native
        AppleTalk port, this object shall contain an octet
        string of zero length.  Note that modifications to
        this object do not affect the nbpTable."
    ::= { atportEntry 17 }

atportConflictPhysAddr OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-only

    STATUS mandatory
    DESCRIPTION
        "The link-layer address of a device which caused
        this entity to set atportStatus to
        offDueToConflict(6). If this address is not
        available, or if the entity has not set atportStatus
        to offDueToConflict, this object shall be a zero
        length OCTET STRING."
    ::= { atportEntry 18 }

-- The atportZoneTable stores information about the zones
-- associated with each port.  The default zone for each
-- port is stored in the port's atportZoneDefault variable;
-- all other zones for the port are listed in this table.
-- If a port only has one zone, it should be stored in the
-- port's atportZoneDefault variable, and this table should
-- be empty.
--
-- One of the indexes for this table is atportZoneName.
-- Even though AppleTalk zone name matches are
-- case-insensitive, this table will store zone names
-- regardless of case.  SNMP Get, GetNext and Set operations
-- are performed on these (potentially) mixed case strings
-- according to the normal SNMP rules with the following
-- caveat: in processing a SET request, the agent shall
-- perform a case-insensitive search and a case-sensitive
-- search.  If the case-insensitive search matches and the
-- case-sensitive search does not match, the "equivalent"
-- zone name exists in another entry with a different
-- capitalization and the SET request shall fail due
-- to the name being inconsistent (SNMPv1 should return a
-- genErr.) This insures that only one version of a zone
-- name will appear in each agent, at the expense of forcing
-- a management station to query using that exact name.

atportZoneTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AtportZoneEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of zone information for non-default
        zones on ports."
    ::= { atport 2 }

atportZoneEntry OBJECT-TYPE
    SYNTAX AtportZoneEntry
    ACCESS not-accessible
    STATUS mandatory

    DESCRIPTION
        "An entry of zone information for a port.

        As an example, an instance of the atportZoneStatus
        object might be named
        atportZoneStatus.2.8.84.119.105.108.105.103.104.116"
    INDEX { atportZonePort, atportZoneName }
    ::= { atportZoneTable 1 }

AtportZoneEntry ::= SEQUENCE {
    atportZonePort     INTEGER,
    atportZoneName     ATName (SIZE (1..32)),
    atportZoneStatus   INTEGER
}

atportZonePort OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An integer representing the port to which this zone
        belongs. The port identified by a particular value
        of this object is the same port as identified by the
        same value of atportIndex."
    ::= { atportZoneEntry 1 }

atportZoneName OBJECT-TYPE
    SYNTAX ATName (SIZE (1..32))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A zone name configured for the AppleTalk port
        referred to in the corresponding entry of
        atportZonePort.

        When this value is changed in a router, the router
        must send a zipNotify packet on the associated
        network."
    ::= { atportZoneEntry 2 }

atportZoneStatus OBJECT-TYPE
    SYNTAX INTEGER {
        valid(1),
        invalid(2)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION

        "The status of this zone entry.

        Setting this object to the value invalid(2) has the
        effect of invalidating the corresponding entry in
        the atportZoneTable.  That is, it effectively
        disassociates the mapping identified with said
        entry.  It is an implementation-specific matter as
        to whether the agent removes an invalidated entry
        from the table. Accordingly, management stations
        must be prepared to receive from agents tabular
        information corresponding to entries not currently
        in use.  Proper interpretation of such entries
        requires examination of the relevant
        atportZoneStatus object."
    ::= { atportZoneEntry 3 }


-- The DDP Group
--
-- Implementation of this group is mandatory for all
-- entities that implement DDP
--
-- This group consists of DDP variables that would be
-- implemented by either a router or an end node.  The
-- following variables are included:
--     ddpOutRequests
--     ddpOutShorts
--     ddpOutLongs
--     ddpInReceives
--     ddpInLocalDatagrams
--     ddpNoProtocolHandlers
--     ddpTooShortErrors
--     ddpTooLongErrors
--     ddpShortDDPErrors
--     ddpChecksumErrors
--     ddpListenerTable
--
-- Note that the variables in this group are not numbered
-- sequentially.  This was done so that it was not necessary
-- to deprecate variables from RFC 1243.

ddpOutRequests OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of DDP datagrams which were
        supplied to DDP by local DDP clients in requests for

        transmission.  Note that this counter does not
        include any datagrams counted in ddpForwRequests."
    ::= { ddp 1 }

ddpOutShorts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of short DDP datagrams which were
        transmitted from this entity."
    ::= { ddp 2 }

ddpOutLongs OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of long DDP datagrams which were
        transmitted from this entity."
    ::= { ddp 3 }

ddpInReceives OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of input datagrams received by
        DDP, including those received in error."
    ::= { ddp 4 }

ddpInLocalDatagrams OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of input DDP datagrams for which
        this
        entity was their final DDP destination."
    ::= { ddp 6 }

ddpNoProtocolHandlers OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of DDP datagrams addressed to this
        entity that were addressed to an upper layer protocol

        for which no protocol handler existed."
    ::= { ddp 7 }

ddpTooShortErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of input DDP datagrams dropped
        because the received data length was less than the
        data length specified in the DDP header or the
        received data length was less than the length of the
        expected DDP header."
    ::= { ddp 9 }

ddpTooLongErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of input DDP datagrams dropped
        because they exceeded the maximum DDP datagram
        size."
    ::= { ddp 10 }

ddpShortDDPErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of input DDP datagrams dropped
        because this entity was not their final destination
        and their type was short DDP."
    ::= { ddp 12 }

ddpChecksumErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of input DDP datagrams for which
        this DDP entity was their final destination, and
        which were dropped because of a checksum error."
    ::= { ddp 14 }

ddpListenerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DdpListenerEntry
    ACCESS not-accessible

    STATUS mandatory
    DESCRIPTION
        "The ddpListenerTable stores information for each
        DDP socket that has a listener."
    ::= { ddp 15 }

ddpListenerEntry OBJECT-TYPE
    SYNTAX DdpListenerEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This ddpListenerEntry contains information about a
        particular socket that has a socket listener.

        As an example, an instance of the ddpListenerStatus
        object might be named ddpListenerStatus.0.80.220.1"
    INDEX { ddpListenerAddress }
    ::= { ddpListenerTable 1 }

DdpListenerEntry ::= SEQUENCE {
    ddpListenerAddress         DdpSocketAddress,
    ddpListenerInPkts          Counter,
    ddpListenerStatus          INTEGER
}

ddpListenerAddress OBJECT-TYPE
    SYNTAX DdpSocketAddress
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The DDP address that this socket listener is bound
        to.  If this socket listener isn't bound to a
        particular address, for instance if it is intended
        for all interfaces, this object shall have the value
        of three octets of zero followed by one octet of
        socket number. The socket number must not equal
        zero."
    ::= { ddpListenerEntry 1 }

ddpListenerInPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of packets received for this listener."
    ::= { ddpListenerEntry 2 }



ddpListenerStatus OBJECT-TYPE
    SYNTAX INTEGER {
        valid(1),
        invalid(2)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this socket listener.
        Setting this object to the value invalid(2) has the
        effect of invalidating the corresponding entry in the
        ddpListenerTable.  That is, it effectively
        disassociates the mapping identified with said
        entry.  It is an implementation-specific matter as
        to whether the agent removes an invalidated entry
        from the table. Accordingly, management stations
        must be prepared to receive from agents tabular
        information corresponding to entries not currently
        in use.  Proper interpretation of such entries
        requires examination of the relevant
        ddpListenerStatus object."
    ::= { ddpListenerEntry 3 }


-- The DDP Router Group
--
-- Implementation of this group is required for all routers
-- which implement DDP
--
-- This group consists of DDP variables that only a router
-- would implement.  The following variables are included:
--     ddpForwRequests
--     ddpOutNoRoutes
--     ddpBroadcastErrors
--     ddpHopCountErrors
--     ddpForwardingTable
--
-- Note that the variables in this group are not numbered
-- sequentially.  This was done so that variables from
-- RFC 1243 did not need to be deprecated.

ddpForwRequests OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of input datagrams for which this entity
        was not their final DDP destination, as a result of

        which an attempt was made to find a route to forward
        them to that final destination."
    ::= { ddp 5 }

ddpOutNoRoutes OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of DDP datagrams dropped because a
        route could not be found to their final destination."
    ::= { ddp 8 }

ddpBroadcastErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of input DDP datagrams dropped
        because this entity was not their final destination
        and they were addressed to the link level broadcast."
    ::= { ddp 11 }

ddpHopCountErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of input DDP datagrams dropped
        because this entity was not their final destination
        and their hop count would exceed 15."
    ::= { ddp 13 }

-- The ddpForwardingTable is a read-only table which shows the
-- next hop that a datagram will take when being routed to a
-- specific network.  If a manager wishes to change data in
-- this table via SNMP, he must change it in the MIB for the
-- routing protocol itself (by incrementing hop counts,
-- etc), rather than in this table.  This table is derived
-- by the managed entity from the information it receives
-- from the routing protocols that it supports.
--
-- This table also shows the routing table from which the next
-- hop was derived.  When a MIB is written for an AppleTalk
-- routing protocol, it should include the definition of an
-- object identifier which will be used in the
-- ddpForwardingProto variable defined here.  (For example,
-- a value for RTMP is defined as { ddp-forw-proto-oids 1 }

-- below.)
--
-- To look for a specific net N in this table, it is suggested
-- that the management station perform a get-next query for
-- ddpForwardingNetEnd.(N-1).  This will retrieve the correct
-- row if it exists in the table.

ddpForwardingTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DdpForwardingEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table of forwarding entries for DDP.  This table
        contains a route for each AppleTalk network currently
        known to the entity."
    ::= { ddp 16 }

ddpForwardingEntry OBJECT-TYPE
    SYNTAX DdpForwardingEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A forwarding entry for a particular AppleTalk
        network.

        As an example, an instance of the ddpForwardingPort
        object might be named ddpForwardingPort.0.90"
    INDEX { ddpForwardingNetEnd }
    ::= { ddpForwardingTable 1 }

DdpForwardingEntry ::= SEQUENCE {
    ddpForwardingNetEnd         ATNetworkNumber,
    ddpForwardingNetStart       ATNetworkNumber,
    ddpForwardingNextHop        OCTET STRING,
    ddpForwardingProto          OBJECT IDENTIFIER,
    ddpForwardingModifiedTime   TimeTicks,
    ddpForwardingUseCounts      Counter,
    ddpForwardingPort           INTEGER
}

ddpForwardingNetEnd OBJECT-TYPE
    SYNTAX ATNetworkNumber
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The last network number in the network range
        matched by this forwarding entry.  This will not be
        zero even if this corresponds to a non-extended

        net."
    ::= { ddpForwardingEntry 1 }

ddpForwardingNetStart OBJECT-TYPE
    SYNTAX ATNetworkNumber
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The first network number in the network range
        matched by this forwarding entry."
    ::= { ddpForwardingEntry 2 }

ddpForwardingNextHop OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The next hop in the route to this entry's
        destination network.  The format of this address can
        be determined by examinating the atportType
        corresponding to this entry."
    ::= { ddpForwardingEntry 3 }

ddpForwardingProto OBJECT-TYPE
    SYNTAX OBJECT IDENTIFIER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The routing mechanism by which this route was
        learned."
    ::= { ddpForwardingEntry 4 }

ddpForwardingModifiedTime OBJECT-TYPE
    SYNTAX TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of sysUpTime at the time of the last
        modification to this entry.  The initial value of
        ddpForwardingModified time shall be the value of
        sysUpTime at the time the entry is created."
    ::= { ddpForwardingEntry 5 }

ddpForwardingUseCounts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION

        "The number of times this entry has been used to
        route a packet to the destination network.  Note
        that this counter is not cleared when the
        corresponding ddpForwardingNextHop variable
        changes."
   ::= { ddpForwardingEntry 6 }

ddpForwardingPort OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The AppleTalk port through which
        ddpForwardingNextHop is reached.  The interface
        identified by a particular value of this variable is
        the same interface as identified by the same value
        of atportIndex."
    ::= { ddpForwardingEntry 7 }


ddpForwProtoOids OBJECT IDENTIFIER ::= { ddp 17 }

-- The value to be assigned to ddpForwardingProto when the
-- routing protocol is RTMP.
rtmpRoutingProto OBJECT IDENTIFIER ::= { ddpForwProtoOids 1 }

-- The value to be assigned to ddpForwardingProto when the
-- routing protocol is KIP.
kipRoutingProto OBJECT IDENTIFIER ::= { ddpForwProtoOids 2 }

ddpForwardingTableOverflows OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times the entity attempted to add an
        entry to the forwarding table but failed due to
        overflow."
    ::= { ddp 18 }


-- The RTMP Group
--
-- Implementation of this group is required for all routers
-- which implement RTMP

rtmpTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RtmpEntry

    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of Routing Table Maintenance Protocol
        entries for this entity."
    ::= { rtmp 1 }

rtmpEntry OBJECT-TYPE
    SYNTAX RtmpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The route entry to a particular network range.

        As an example, an instance of the rtmpPort object
        might be named rtmpPort.0.80"
    INDEX { rtmpRangeStart }
    ::= { rtmpTable 1 }

RtmpEntry ::= SEQUENCE {
    rtmpRangeStart  ATNetworkNumber,
    rtmpRangeEnd    ATNetworkNumber,
    rtmpNextHop     OCTET STRING,
    rtmpType        INTEGER,
    rtmpPort        INTEGER,
    rtmpHops        INTEGER,
    rtmpState       INTEGER
}

rtmpRangeStart OBJECT-TYPE
    SYNTAX ATNetworkNumber
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The first DDP network address in the network range
        to which this routing entry pertains.  This is a two
        octet DDP network address in network byte order."
    ::= { rtmpEntry 1 }

rtmpRangeEnd OBJECT-TYPE
    SYNTAX ATNetworkNumber
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The last DDP network address in the network range
        to which this routing entry pertains.  This is a two
        octet DDP network address in network byte order.  If
        the network to which this routing entry pertains is

        a non-extended network, the value for rtmpRangeEnd
        shall be two octets of zero."
    ::= { rtmpEntry 2 }

rtmpNextHop OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The next internet router in the route to this
        entry's destination network.  The format of this
        address can be determined by examinating the
        atportType corresponding to this entry."
    ::= { rtmpEntry 3 }

rtmpType OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        appletalk(2),
        serialPPP(3),
        serialNonstandard(4)
    }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The type of network over which this route points."
    ::= { rtmpEntry 4 }

rtmpPort OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The AppleTalk port over which this route points.
        The interface identified by a particular value of
        this variable is the same interface as identified by
        the same value of atportIndex."
    ::= { rtmpEntry 5 }

rtmpHops OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of hops required to reach the
        destination network to which this routing entry
        pertains."
    ::= { rtmpEntry 6 }

rtmpState OBJECT-TYPE
    SYNTAX INTEGER {
        good(1),
        suspect(2),
        badZero(3),
        badOne(4),
        invalid(5)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of the information contained in this
        route entry.

        Setting this object to the value invalid(5) has the
        effect of invalidating the corresponding entry in
        the rtmpTable.  That is, it  effectively
        disassociates the mapping identified with said
        entry.  It is an implementation-specific matter as
        to whether the agent removes an invalidated entry
        from the table. Accordingly, management stations
        must be prepared to receive from agents tabular
        information corresponding to entries not currently
        in use.  Proper interpretation of such entries
        requires examination of the relevant rtmpState
        object."
    ::= { rtmpEntry 7 }

rtmpInDataPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A count of the number of good RTMP data packets
        received by this entity."
    ::= { rtmp 2 }

rtmpOutDataPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A count of the number of RTMP packets sent by this
        entity."
    ::= { rtmp 3 }

rtmpInRequestPkts OBJECT-TYPE
    SYNTAX Counter

    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A count of the number of good RTMP Request packets
        received by this entity."
    ::= { rtmp 4 }

rtmpNextIREqualChanges OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A count of the number of times RTMP changes the
        Next Internet Router in a routing entry because the
        hop count advertised in a routing tuple was equal to
        the current hop count for a particular network."
    ::= { rtmp 5 }

rtmpNextIRLessChanges OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A count of the number of times RTMP changes the
        Next Internet Router in a routing entry because the
        hop count advertised in a routing tuple was less
        than the current hop count for a particular network."
    ::= { rtmp 6 }

rtmpRouteDeletes OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A count of the number of times RTMP deletes a route
        because it was aged out of the table.  This can help
        to detect routing problems."
    ::= { rtmp 7 }

rtmpRoutingTableOverflows OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times RTMP attempted to add a route
        to the RTMP table but failed due to lack of space."
    ::= { rtmp 8 }


-- The RTMP Stub Group
--
-- Implementation of this group is mandatory for all
-- entities that implement RTMP
--
-- It is intended that this group be implemented by routers
-- and end nodes.

rtmpOutRequestPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A count of the number of RTMP Request packets sent
        by this entity."
    ::= { rtmpStub 1 }

rtmpInVersionMismatches OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A count of the number of RTMP packets received by
        this entity that were rejected due to a version
        mismatch."
    ::= { rtmpStub 2 }

rtmpInErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A count of the number of RTMP packets received by
        this entity that were rejected for an error other
        than version mismatch."
    ::= { rtmpStub 3 }


-- The KIP Group
--
-- Implementation of this group is mandatory for all
-- entities that implement KIP

kipTable OBJECT-TYPE
    SYNTAX SEQUENCE OF KipEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION

        "The table of routing information for KIP networks."
    ::= { kip 1 }

kipEntry OBJECT-TYPE
    SYNTAX KipEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in the routing table for KIP networks.

        As an example, an instance of the kipCore object
        might be named kipCore.0.80"
    INDEX { kipNetStart }
    ::= { kipTable 1 }

KipEntry ::= SEQUENCE {
    kipNetStart     ATNetworkNumber,
    kipNetEnd       ATNetworkNumber,
    kipNextHop      IpAddress,
    kipHopCount     INTEGER,
    kipBCastAddr    IpAddress,
    kipCore         INTEGER,
    kipType         INTEGER,
    kipState        INTEGER,
    kipShare        INTEGER,
    kipFrom         IpAddress
}

kipNetStart OBJECT-TYPE
    SYNTAX ATNetworkNumber
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The first AppleTalk network address in the range
        for this routing entry.  This address is a two octet
        DDP network address in network byte order."
    ::= { kipEntry 1 }

kipNetEnd OBJECT-TYPE
    SYNTAX ATNetworkNumber
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The last AppleTalk network address in the range for
        this routing entry.  This address is a two octet DDP
        network address in network byte order.  If the
        network to which this AppleTalk port is connected is
        a non-extended network, the value for kipNetEnd

        shall be two octets of zero."
    ::= { kipEntry 2 }

kipNextHop OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The IP address of the next hop in the route to this
        entry's destination network."
    ::= { kipEntry 3 }

kipHopCount OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The number of hops required to reach the destination
        network to which this entry pertains."
    ::= { kipEntry 4 }

kipBCastAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The form of the IP address used to broadcast on this
        network."
    ::= { kipEntry 5 }

kipCore OBJECT-TYPE
    SYNTAX INTEGER {
         core(1),
         notcore(2)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of kipNextHop as a core gateway."
    ::= { kipEntry 6 }

kipType OBJECT-TYPE
    SYNTAX INTEGER {
         kipRouter(1),
         net(2),
         host(3),
         other(4),
         async(5)

    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The type of the entity that this route points to."
    ::= { kipEntry 7 }

kipState OBJECT-TYPE
    SYNTAX INTEGER {
         configured(1),  -- this entry is not aged
         learned(2),
         invalid(3)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The state of this network entry.

        Setting this object to the value invalid(3) has the
        effect of invalidating the corresponding entry in the
        kipTable.  That is, it  effectively disassociates the
        mapping identified with said entry.  It is an
        implementation-specific matter as to whether the agent
        removes an invalidated entry from the table.
        Accordingly, management stations must be prepared to
        receive from agents tabular information corresponding
        to entries not currently in use.  Proper
        interpretation of such entries requires examination
        of the relevant kipState object."
    ::= { kipEntry 8 }

kipShare OBJECT-TYPE
    SYNTAX INTEGER {
         shared(1),
         private(2)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "If the information in this entry is propagated to
        other routers as part of the AA routing protocol,
        the value of this variable is equal to shared(1).
        Otherwise its value is private(2)."
    ::= { kipEntry 9 }

kipFrom OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-only

    STATUS mandatory
    DESCRIPTION
        "The IP address from which the routing entry was
        learned via the AA protocol.  If this entry was not
        created via the AA protocol, it should contain IP
        address 0.0.0.0."
    ::= { kipEntry 10 }


-- The ZIP Router Group
--
-- Implementation of this group is required for all routers
-- which implement ZIP
--
-- This group consists of ZIP variables that would be
-- implemented by a router.

zipTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ZipEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of zone information for reachable
        AppleTalk networks."
    ::= { zipRouter 1 }

zipEntry OBJECT-TYPE
    SYNTAX ZipEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry of zone information for a particular zone
        and network combination.

        As an example, an instance of the zipZoneState object
        might be named zipZoneState.0.80.4"
    INDEX { zipZoneNetStart, zipZoneIndex }
    ::= { zipTable 1 }

ZipEntry ::= SEQUENCE {
    zipZoneName     ATName,
    zipZoneIndex    INTEGER,
    zipZoneNetStart ATNetworkNumber,
    zipZoneNetEnd   ATNetworkNumber,
    zipZoneState    INTEGER,
    zipZoneFrom     OCTET STRING,
    zipZonePort     INTEGER
}

zipZoneName OBJECT-TYPE
    SYNTAX ATName
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The zone name of this entry.  This is stored in
        Mac ASCII format.  If the full zone list for the
        entry is not known, the value for zipZoneName shall
        be a zero length octet string."
    ::= { zipEntry 1 }

zipZoneIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "An integer that is unique to the zipZoneName that
        is present in this entry.  For any given zone name,
        every zipEntry that has an equal zone name will have
        the same zipZoneIndex.  When a zone name is
        discovered which is not currently in the table, it
        will be assigned an index greater than any
        previously assigned index."
    ::= { zipEntry 2 }

zipZoneNetStart OBJECT-TYPE
    SYNTAX ATNetworkNumber
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The network that starts the range for this entry.
        This address is a two octet DDP network address in
        network byte order."
    ::= { zipEntry 3 }

zipZoneNetEnd OBJECT-TYPE
    SYNTAX ATNetworkNumber
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The network that ends the range for this entry.
        This address is a two octet DDP network address in
        network byte order.  If the network to which this
        zip entry pertains is a non-extended network, the
        value for zipZoneNetEnd shall be two octets of
        zero."
    ::= { zipEntry 4 }


zipZoneState OBJECT-TYPE
    SYNTAX INTEGER {
        valid(1),
        invalid(2)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The state of this zip entry.

        Setting this object to the value invalid(2) has the
        effect of invalidating the corresponding entry in
        the zipTable.  That is, it  effectively
        disassociates the mapping identified with said
        entry.  It is an implementation-specific matter as
        to whether the agent removes an invalidated entry
        from the table. Accordingly, management stations
        must be prepared to receive from agents tabular
        information corresponding to entries not currently
        in use.  Proper interpretation of such entries
        requires examination of the relevant zipZoneState
        object."
    ::= { zipEntry 5 }

zipZoneFrom OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The address from which this zone name to network
        number mapping was learned.  The format of this
        address can be determined by examining the
        atportType corresponding to this entry.  When this
        mapping is learned from the entity itself, this
        object shall have the value of three
        octets of zero."
    ::= { zipEntry 6 }

zipZonePort OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The AppleTalk port through which this zone name to
        network number mapping was learned.  The interface
        identified by a particular value of this variable is
        the same interface as identified by the same value
        of atportIndex."

    ::= { zipEntry 7 }

zipInZipQueries OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ZIP Queries received by this entity."
    ::= { zipRouter 2 }

zipInZipReplies OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ZIP Replies received by this entity."
    ::= { zipRouter 3 }

zipInZipExtendedReplies OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ZIP Extended Replies received by this
        entity."
    ::= { zipRouter 4 }

zipZoneConflictErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times a conflict has been detected
        between this entity's zone information and another
        entity's zone information."
    ::= { zipRouter 5 }

zipInObsoletes OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ZIP Takedown or ZIP Bringup packets
        received by this entity.  Note that as the ZIP
        Takedown and ZIP Bringup packets have been
        obsoleted, the receipt of one of these packets
        indicates that a node sent it in error."
    ::= { zipRouter 6 }

-- The zipRouterNetInfoTable is used to record information
-- about zipGetNetInfo and zipGetNetInfo Reply packets that
-- were received on each port for a router.  This table
-- augments the atportTable.

zipRouterNetInfoTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ZipRouterNetInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of Net Info packets received by each port
        on this entity."
    ::= { zipRouter 7 }

zipRouterNetInfoEntry OBJECT-TYPE
    SYNTAX ZipRouterNetInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The description of the Net Info packets received on
        a particular port on this entity.  One such entry
        shall exist for each atport on this router entity.

        As an example, an instance of the zipInGetNetInfos
        object might be named zipInGetNetInfos.2"
    INDEX { atportIndex }
    ::= { zipRouterNetInfoTable 1 }

ZipRouterNetInfoEntry ::= SEQUENCE {
    zipInGetNetInfos        Counter,
    zipOutGetNetInfoReplies Counter,
    zipZoneOutInvalids      Counter,
    zipAddressInvalids      Counter
}

zipInGetNetInfos OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ZIP GetNetInfo packets received on
        this port by this entity."
    ::= { zipRouterNetInfoEntry 1 }

zipOutGetNetInfoReplies OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory

    DESCRIPTION
        "The number of ZIP GetNetInfo Reply packets sent out
        this port by this entity."
    ::= { zipRouterNetInfoEntry 2 }

zipZoneOutInvalids OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times this entity has sent a ZIP
        GetNetInfo Reply with the zone invalid bit set in
        response to a GetNetInfo Request with an invalid
        zone name."
    ::= { zipRouterNetInfoEntry 3 }

zipAddressInvalids OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times this entity had to broadcast a
        ZIP GetNetInfo Reply because the GetNetInfo Request
        had an invalid address."
    ::= { zipRouterNetInfoEntry 4 }


-- The ZIP End Node Group
--
-- Implementation of this group is mandatory for all entities
-- that implement ZIP
--
-- This group consists of ZIP variables that would be
-- implemented by either a router or an end node.

-- The zipNetInfoTable is used to record information about
-- zipGetNetInfo and zipGetNetInfo Reply packets that were
-- received on each port of an entity.  This table augments
-- the atportTable.

zipNetInfoTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ZipNetInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of Net Info packets received by each port
        on this entity."
    ::= { zipEndNode 1 }

zipNetInfoEntry OBJECT-TYPE
    SYNTAX ZipNetInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The description of the Net Info packets received on
        a particular port on this entity.  One such entry
        shall exist for each atport on this entity.

        As an example, an instance of the zipOutGetNetInfos
        object might be named zipOutGetNetInfos.2"
    INDEX { atportIndex }
    ::= { zipNetInfoTable 1 }

ZipNetInfoEntry ::= SEQUENCE {
    zipOutGetNetInfos       Counter,
    zipInGetNetInfoReplies  Counter,
    zipZoneInInvalids       Counter
}

zipOutGetNetInfos OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ZIP GetNetInfo packets sent out this
        port by this entity."
    ::= { zipNetInfoEntry 1 }

zipInGetNetInfoReplies OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ZIP GetNetInfo Reply packets received
    on this port by this entity."
    ::= { zipNetInfoEntry 2 }

zipZoneInInvalids OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times this entity has received a ZIP
        GetNetInfo Reply with the zone invalid bit set
        because the corresponding GetNetInfo Request had an
        invalid zone name."
    ::= { zipNetInfoEntry 3 }

zipInErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ZIP packets received by this entity
        that were rejected for any error."
    ::= { zipEndNode 2 }


-- The NBP Group
--
-- Implementation of this group is mandatory for all entities
-- that implement NBP

nbpTable OBJECT-TYPE
    SYNTAX SEQUENCE OF NbpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of NBP services registered on this entity."
    ::= { nbp 1 }

nbpEntry OBJECT-TYPE
    SYNTAX NbpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The description of an NBP service registered on this
        entity.

        As an example, an instance of the nbpZone object
        might be named nbpZone.2"
    INDEX { nbpIndex }
    ::= { nbpTable  1 }

NbpEntry ::= SEQUENCE {
    nbpIndex        INTEGER,
    nbpObject       ATName (SIZE (1..32)),
    nbpType         ATName (SIZE (1..32)),
    nbpZone         ATName,
    nbpState        INTEGER,
    nbpAddress      DdpSocketAddress,
    nbpEnumerator   INTEGER (0..255)
}

nbpIndex OBJECT-TYPE
    SYNTAX INTEGER

    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The index of this NBP entry.  This index is unique
        with respect to the indexes of all other NBP entries,
        and shall remain constant throughout the lifetime
        of this object."
    ::= { nbpEntry 1 }

nbpObject OBJECT-TYPE
    SYNTAX ATName (SIZE (1..32))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The name of the service described by this entity.
        When this variable is changed, the entity should
        perform an NBP registration using the new nbpObject."
    ::= { nbpEntry 2 }

nbpType OBJECT-TYPE
    SYNTAX ATName (SIZE (1..32))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The type of the service described by this entity.
        When this variable is changed, the entity should
        perform an NBP registration using the new nbpType."
    ::= { nbpEntry 3 }

nbpZone OBJECT-TYPE
    SYNTAX ATName
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The zone the service described by this entity is
        registered in.  This must be the actual zone name,
        without any wildcard characters.  When this variable
        is changed, the entity should perform an NBP
        registration using the new nbpZone."
        ::= { nbpEntry 4 }

nbpState OBJECT-TYPE
    SYNTAX INTEGER {
        valid(1),
        registering(2), -- attempting to register the service
        registrationFailed(3),
        invalid(4)
    }

    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The state of this NBP entry.
        When the registration for an entry in the nbpTable
        fails, it is an implementation-specific matter as to
        how long the entry will remain in the
        registrationFailed(3) state before moving to the
        invalid(4) state.  Note that the entry may pass
        immediately from the registrationFailed state to
        the invalid state.

        Setting this object to the value invalid(4) has the
        effect of invalidating the corresponding entry in the
        nbpTable.  That is, it  effectively disassociates the
        mapping identified with said entry.  It is an
        implementation-specific matter as to whether the agent
        removes an invalidated entry from the table.
        Accordingly, management stations must be prepared to
        receive from agents tabular information corresponding
        to entries not currently in use.  Proper
        interpretation of such entries requires examination
        of the relevant nbpState object."
    ::= { nbpEntry 5 }

nbpAddress OBJECT-TYPE
    SYNTAX DdpSocketAddress
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The DDP network, node, and socket number of this
        entity. If this is unspecified, for instance if the
        registration is on all ports of a multiport device,
        this object shall have the value of three octets of
        zero, followed by one octet of socket number."
    ::= { nbpEntry 6 }

nbpEnumerator OBJECT-TYPE
    SYNTAX INTEGER (0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The enumerator assigned to this entity."
    ::= { nbpEntry 7 }


nbpInLookUpRequests OBJECT-TYPE
    SYNTAX Counter

    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of NBP LookUp Requests received."
    ::= { nbp 2 }

nbpInLookUpReplies OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of NBP LookUp Replies received."
    ::= { nbp 3 }

nbpInBroadcastRequests OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of NBP Broadcast Requests received."
    ::= { nbp 4 }

nbpInForwardRequests OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of NBP Forward Requests received."
    ::= { nbp 5 }

nbpOutLookUpReplies OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of NBP LookUp Replies sent."
    ::= { nbp 6 }

nbpRegistrationFailures OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times this node experienced a failure
        in attempting to register an NBP entity."
    ::= { nbp 7 }



    nbpInErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of NBP packets received by this entity
        that were rejected for any error."
    ::= { nbp 8 }


-- The ATEcho Group
--
-- Implementation of this group is mandatory for all
-- entities that implement ATEcho

atechoRequests OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of AppleTalk Echo requests received."
    ::= { atecho 1 }

atechoReplies OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of AppleTalk Echo replies sent."
    ::= { atecho 2 }

atechoOutRequests OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The count of AppleTalk Echo requests sent."
    ::= { atecho 3 }

atechoInReplies OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The count of AppleTalk Echo replies received."
    ::= { atecho 4 }



-- The ATP Group
--
-- Implementation of this group is mandatory for all entities
-- that implement ATP

atpInPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ATP packets received by this entity."
    ::= { atp 1 }

atpOutPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ATP packets sent by this entity."
    ::= { atp 2 }

atpTRequestRetransmissions OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times that a timeout occurred and a
        Transaction Request packet needed to be
        retransmitted by this host."
    ::= { atp 3 }

atpTResponseRetransmissions OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times a timeout was detected and a
        Transaction Response packet needed to be
        retransmitted by this host."
    ::= { atp 4 }

atpReleaseTimerExpiredCounts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times the release timer expired, as a
        result of which a Request Control Block had to be

        deleted."
    ::= { atp 5 }

atpRetryCountExceededs OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times the retry count was exceeded,
        and an error was returned to the client of ATP."
    ::= { atp 6 }

atpListenerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AtpListenerEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The atpListenerTable stores information for each ATP
        socket that has a listener."
    ::= { atp 7 }

atpListenerEntry OBJECT-TYPE
    SYNTAX AtpListenerEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This atpListenerEntry contains information about a
        particular socket that has a socket listener.

        As an example, an instance of the atpListenerStatus
        object might be named atpListenerStatus.0.80.220.3"
    INDEX { atpListenerAddress }
    ::= { atpListenerTable 1 }

AtpListenerEntry ::= SEQUENCE {
    atpListenerAddress   DdpSocketAddress,
    atpListenerStatus    INTEGER
}

atpListenerAddress OBJECT-TYPE
    SYNTAX DdpSocketAddress
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The DDP address that this socket listener is bound
        to. If this socket listener isn't bound to a
        particular address, for instance if it is intended
        for all interfaces, this object shall have the value

        of three octets of zero followed by one octet of
        socket number."
    ::= { atpListenerEntry 1 }

atpListenerStatus OBJECT-TYPE
    SYNTAX INTEGER {
        valid(1),
        invalid(2)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this socket.

        Setting this object to the value invalid(2) has the
        effect of invalidating the corresponding entry in
        the atpListenerTable.  That is, it effectively
        disassociates the mapping identified with said
        entry.  It is an implementation-specific matter as
        to whether the agent removes an invalidated entry
        from the table. Accordingly, management stations
        must be prepared to receive from agents tabular
        information corresponding to entries not currently
        in use.  Proper interpretation of such entries
        requires examination of the relevant
        atpListenerStatus object."
    ::= { atpListenerEntry 2 }


-- The PAP group
--
-- Implementation of this group is mandatory for all entities
-- that implement PAP

papInOpenConns OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of PAP Open Connection requests received
        by this entity."
    ::= { pap 1 }

papOutOpenConns OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION

        "The number of PAP Open Connection requests sent by
        this entity."
    ::= { pap 2 }

papInDatas OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of PAP Data messages received by
        this entity."
    ::= { pap 3 }

papOutDatas OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of PAP Data messages sent by
        this entity."
    ::= { pap 4 }

papInCloseConns OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of PAP Close Connection requests
        received by this entity."
    ::= { pap 5 }

papOutCloseConns OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of PAP Close Connection requests sent by
        this entity."
    ::= { pap 6 }

papTickleTimeoutCloses OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times the PAP entity on this node
        closed a connection because it didn't receive a
        Tickle message before its timer expired."

    ::= { pap 7 }

papServerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF PapServerEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of servers on this entity that are
        accessible through the Printer Access Protocol."
    ::= { pap 8 }

papServerEntry OBJECT-TYPE
    SYNTAX PapServerEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A set of information about a particular PAP server's
        configuration and performance.

        As an example, an instance of the papServerStatus
        object might be named papServerStatus.1"
    INDEX { papServerIndex }
    ::= { papServerTable 1 }

PapServerEntry ::= SEQUENCE {
    papServerIndex                          INTEGER,
    papServerListeningSocket                DdpSocketAddress,
    papServerStatus                         DisplayString,
    papServerCompletedJobs                  Counter,
    papServerBusyJobs                       INTEGER,
    papServerFreeJobs                       INTEGER,
    papServerAuthenticationFailures         Counter,
    papServerAccountingFailures             Counter,
    papServerGeneralFailures                Counter,
    papServerState                          INTEGER,
    papServerLastStatusMsg                  DisplayString
}

papServerIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An unique value for each Printer Access Protocol
        Server."
    ::= { papServerEntry 1 }



papServerListeningSocket OBJECT-TYPE
    SYNTAX DdpSocketAddress
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The Server Listening Socket that this PAP server is
        listening on."
    ::= { papServerEntry 2 }

papServerStatus OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The status string of this server.  This is the
        message as it would appear in a PAP Status Reply
        from this server."
    ::= { papServerEntry 3 }

papServerCompletedJobs OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of jobs that have been accepted and
        successfully executed by this server."
    ::= { papServerEntry 4 }

papServerBusyJobs OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of GetNextJob calls that have accepted
        and are currently executing a job."
    ::= { papServerEntry 5 }

papServerFreeJobs OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The minimum number of GetNextJob calls that are
        currently waiting for a job."
    ::= { papServerEntry 6 }




papServerAuthenticationFailures OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times this PAP server rejected a job
        because the job was not correctly authenticated."
    ::= { papServerEntry 7 }

papServerAccountingFailures OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times this PAP server rejected a job
        because the job did not fit some accounting rule,
        such as exceeding a quota."
    ::= { papServerEntry 8 }

papServerGeneralFailures OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times this PAP server rejected a job
        for some reason other than authentication or
        accounting failures."
    ::= { papServerEntry 9 }

papServerState OBJECT-TYPE
    SYNTAX INTEGER {
        valid(1),
        invalid(2)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The state of this PAP Server entry.

        Setting this object to the value invalid(2) has the
        effect of invalidating the corresponding entry in
        the papServerTable.  That is, it  effectively
        disassociates the mapping identified with said
        entry.  It is an implementation-specific matter as
        to whether the agent removes an invalidated entry
        from the table. Accordingly, management stations
        must be prepared to receive from agents tabular
        information corresponding to entries not currently

        in use.  Proper interpretation of such entries
        requires examination of the relevant papServerState
        object."
    ::= { papServerEntry 10 }

papServerLastStatusMsg OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The last status message that was transmitted by
        this server."
    ::= { papServerEntry 11 }


-- The ASP Group
--
-- Implementation of this group is mandatory for all entities
-- that implement ASP

aspInputTransactions OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ASP requests and replies received by
        this entity.  Note that this is not necessarily the
        number of packets containing ASP transactions."
    ::= { asp 1 }

aspOutputTransactions OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ASP requests and replies sent by this
        entity.  Note that this is not necessarily the number
        of packets containing ASP transactions."
    ::= { asp 2 }

aspInOpenSessions OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ASP Open Session requests and replies
        received by this entity."
    ::= { asp 3 }

aspOutOpenSessions OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ASP Open Session requests and replies
        sent by this entity."
    ::= { asp 4 }

aspInCloseSessions OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ASP Close Session requests and replies
        received by this entity."
    ::= { asp 5 }

aspOutCloseSessions OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ASP Close Session requests and replies
        sent by this entity."
   ::= { asp 6 }

aspNoMoreSessionsErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times an error condition was returned
        because this server implementation could not support
        another session."
    ::= { asp 7 }

aspTickleTimeOutCloses OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times the ASP entity on this node
        closed a connection because it didn't receive any
        messages from the remote end before its timer
        expired."
    ::= { asp 8 }


aspConnTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AspConnEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of ASP connections on this entity."
    ::= { asp 9 }

aspConnEntry OBJECT-TYPE
    SYNTAX AspConnEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A set of information describing an ASP connection.

        As an example, an instance of the aspConnState object
        might be named
        aspConnState.0.80.220.135.0.80.239.119.12"
    INDEX { aspConnLocalAddress, aspConnRemoteAddress,
            aspConnID }
    ::= { aspConnTable 1 }

AspConnEntry ::= SEQUENCE {
    aspConnLocalAddress        DdpSocketAddress,
    aspConnRemoteAddress       DdpSocketAddress,
    aspConnID                  INTEGER (1..255),
    aspConnLastReqNum          INTEGER (1..65535),
    aspConnServerEnd           INTEGER,
    aspConnState               INTEGER
}

aspConnLocalAddress OBJECT-TYPE
    SYNTAX DdpSocketAddress
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The local address of this ASP connection."
    ::= { aspConnEntry 1 }

aspConnRemoteAddress OBJECT-TYPE
    SYNTAX DdpSocketAddress
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The remote address of this ASP connection.  If
        this entry is in the listening mode, this object
        shall have a value of four octets of zero."
    ::= { aspConnEntry 2 }

aspConnID OBJECT-TYPE
    SYNTAX INTEGER (1..255)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The remote Connection ID of this ASP connection.  If
        this entry is in the listening mode, this object
        shall have a value of zero."
    ::= { aspConnEntry 3 }

aspConnLastReqNum  OBJECT-TYPE
    SYNTAX INTEGER (1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The last request number on this ASP connection.  If
        this entry is in the listening mode, this object
        shall have a value of zero."
    ::= { aspConnEntry 4 }

aspConnServerEnd OBJECT-TYPE
    SYNTAX INTEGER {
        sss(1), -- Server Session Socket
        wss(2), -- Workstation Session Socket
        sls(3)  -- Server Listening Socket
    }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Specifies what mode the local session end is in."
    ::= { aspConnEntry 5 }

aspConnState OBJECT-TYPE
    SYNTAX INTEGER {
        open(1),
        closed(2),
        invalid(3)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The state of this ASP connection.
        Setting this object to the value invalid(3) has the
        effect of invalidating the corresponding entry in the
        aspConnTable.  That is, it  effectively disassociates
        the mapping identified with said entry.  It is an
        implementation-specific matter as to whether the agent
        removes an invalidated entry from the table.

        Accordingly, management stations must be prepared to
        receive from agents tabular information corresponding
        to entries not currently in use.  Proper
        interpretation of such entries requires examination
        of the relevant aspConnState object."
    ::= { aspConnEntry 6 }


-- The ADSP Group
--
-- Implementation of this group is mandatory for all entities
-- that implement ADSP


adspInPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ADSP packets received by this entity."
    ::= { adsp 1 }

adspOutPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ADSP packets sent by this entity."
    ::= { adsp 2 }

adspInOctets OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of data octets contained in ADSP packets
        received by this entity.  Note that this does not
        include EOM bits."
    ::= { adsp 3 }

adspOutOctets OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of data octets contained in ADSP packets
        sent by this entity.  Note that this does not include
        EOM bits."

    ::= { adsp 4 }

adspInDataPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ADSP data packets this entity has
        received."
    ::= { adsp 5 }

adspOutDataPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ADSP data packets this entity has
        sent."
    ::= { adsp 6 }

adspTimeoutErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times the ADSP on this entity detected
        an expired connection timer."
    ::= { adsp 7 }

adspTimeoutCloseErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times the ADSP on this entity closed a
        connection because of too many timeouts."
    ::= { adsp 8 }

adspConnTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AdspConnEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of ADSP connections on this entity."
    ::= { adsp 9 }

adspConnEntry OBJECT-TYPE
    SYNTAX AdspConnEntry

    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A set of information describing an ADSP connection.
        As an example, an instance of the adspConnState object
        might be named
        adspConnState.0.80.220.7.0.80.239.142.31231"
    INDEX { adspConnLocalAddress, adspConnRemoteAddress,
            adspConnLocalConnID }
    ::= { adspConnTable 1 }

AdspConnEntry ::= SEQUENCE {
    adspConnLocalAddress        DdpSocketAddress,
    adspConnLocalConnID         INTEGER (0..65535),
    adspConnRemoteAddress       DdpSocketAddress,
    adspConnRemoteConnID        INTEGER (0..65535),
    adspConnState               INTEGER
}

adspConnLocalAddress OBJECT-TYPE
    SYNTAX DdpSocketAddress
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The local DDP address of this ADSP connection."
    ::= { adspConnEntry 1 }

adspConnLocalConnID OBJECT-TYPE
    SYNTAX INTEGER (0..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The local Connection ID of this ADSP connection.  If
        this entry specifies an ADSP listener, this value
        shall be zero."
    ::= { adspConnEntry 2 }

adspConnRemoteAddress OBJECT-TYPE
    SYNTAX DdpSocketAddress
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The remote DDP address of this ADSP connection.  If
        this entry specifies an ADSP listener, this value
        shall be zero."
    ::= { adspConnEntry 3 }

adspConnRemoteConnID OBJECT-TYPE

    SYNTAX INTEGER (0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The remote Connection ID of this ADSP connection.
        If this entry specifies an ADSP listener, this value
        shall be zero."
    ::= { adspConnEntry 4 }

adspConnState OBJECT-TYPE
    SYNTAX INTEGER {
        open(1),
        localHalfOpen(2),
        remoteHalfOpen(3),
        listening(4),
        closed(5),
        invalid(6)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The state of this ADSP connection.  The state is
        open if both ends are established.  If only one end
        is established, then the state is half-open.  If
        neither end is established, then the state is
        closed.  If an ADSP server is listening on a socket
        and is not yet connected, its state is set to
        listening, and the adspConnRemoteAddress,
        adspConnRemoteSocket, adspConnRemoteConnID, and
        adspConnRemoteWindowSize are all set to zero.

        Setting this object to the value invalid(6) has the
        effect of invalidating the corresponding entry in
        the adspConnTable.  That is, it  effectively
        disassociates the mapping identified with said
        entry.  It is an implementation-specific matter as
        to whether the agent removes an invalidated entry
        from the table. Accordingly, management stations
        must be prepared to receive from agents tabular
        information corresponding to entries not currently
        in use.  Proper interpretation of such entries
        requires examination of the relevant adspConnState
        object."
    ::= { adspConnEntry 5 }





-- The ATPortPtoP Group
--
-- Implementation of this group is mandatory for all entities
-- that implement AppleTalk point-to-point links

atportPtoPTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AtportPtoPEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of AppleTalk point-to-point connections for
        this entity."
    ::= { atportptop 1 }

atportPtoPEntry OBJECT-TYPE
    SYNTAX AtportPtoPEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The description of one of the AppleTalk
        point-to-point connections on this entity.

        As an example, an instance of the
        atportPtoPRemoteAddress object might be named
        atportPtoPRemoteAddress.2"
    INDEX { atportPtoPIndex }
    ::= { atportPtoPTable 1 }

AtportPtoPEntry ::= SEQUENCE {
    atportPtoPIndex           INTEGER,
    atportPtoPProtocol        OBJECT IDENTIFIER,
    atportPtoPRemoteName      DisplayString,
    atportPtoPRemoteAddress   OCTET STRING,
    atportPtoPPortIndex       INTEGER,
    atportPtoPStatus          INTEGER
}

atportPtoPIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A unique value for each AppleTalk point-to-point
        connection.  Its value is between 1 and the total
        number of AppleTalk point-to-point connections.  The
        value for each connection must remain constant at
        least from the re-initialization of the entity's
        network management system to the next

        re-initialization."
    ::= { atportPtoPEntry 1 }

atportPtoPProtocol OBJECT-TYPE
    SYNTAX OBJECT IDENTIFIER
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The protocol type used over the point-to-point
        connection."
    ::= { atportPtoPEntry 2 }

atportPtoPRemoteName OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "A text string containing the network node name of the
        entity at the other end of the point-to-point link.
        If the name is unknown or undefined, then this
        string is zero length."
    ::= { atportPtoPEntry 3 }

atportPtoPRemoteAddress OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The network address of the entity at the other end
        of the point-to-point link in network byte order.
        The format of this address can be determined
        by examinating the atportType corresponding to this
        entry.  If the address is unknown or undefined, then
        this string is zero length."
    ::= { atportPtoPEntry 4 }

atportPtoPPortIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The AppleTalk port associated with this
        point-to-point connection.  The interface identified
        by a particular value of this index is the same
        interface as identified by the same value of
        atportIndex."
    ::= { atportPtoPEntry 5 }


atportPtoPStatus OBJECT-TYPE
    SYNTAX INTEGER {
        valid(1),
        invalid(2)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this entry in the atportPtoPTable.

        Setting this object to the value invalid(2) has the
        effect of invalidating the corresponding entry in
        the atportPtoPTable.  That is, it  effectively
        disassociates the mapping identified with said
        entry.  It is an implementation-specific matter as
        to whether the agent removes an invalidated entry
        from the table. Accordingly, management stations
        must be prepared to receive from agents tabular
        information corresponding to entries not currently
        in use.  Proper interpretation of such entries
        requires examinationr of the relevant
        atportPtoPStatus object."
    ::= { atportPtoPEntry 6 }

atportPtoPProtoOids OBJECT IDENTIFIER ::= { atportptop 2 }

-- A list of values to be used for the atportPtoPProtocol
-- variable.
-- When new protocols are defined, their oids may be defined
-- in separate MIB documents in different branches of the tree.

pToPProtoOther OBJECT IDENTIFIER ::= { atportPtoPProtoOids 1 }
pToPProtoAurp OBJECT IDENTIFIER ::= { atportPtoPProtoOids 2 }
pToPProtoCaymanUdp OBJECT IDENTIFIER ::=
            { atportPtoPProtoOids 3 }
pToPProtoAtkvmsDecnetIV OBJECT IDENTIFIER ::=
            { atportPtoPProtoOids 4 }
pToPProtoLiaisonUdp OBJECT IDENTIFIER ::=
            { atportPtoPProtoOids 5 }
pToPProtoIpx OBJECT IDENTIFIER ::= { atportPtoPProtoOids 6 }
pToPProtoShivaIp OBJECT IDENTIFIER ::=
            { atportPtoPProtoOids 7 }







-- The Per Port Counters Group
--
-- Implementation of this group is optional.

perPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF PerPortEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of per-port statistics for this entity."
    ::= { perPort 1 }

perPortEntry OBJECT-TYPE
    SYNTAX PerPortEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The statistics available for a particular port on
        this entity.

        As an example, an instance of the perPortAarpInProbes
        object might be named perPortAarpInProbes.2"
    INDEX { atportIndex }
    ::= { perPortTable  1 }

PerPortEntry ::= SEQUENCE {
    perPortAarpInProbes             Counter,
    perPortAarpOutProbes            Counter,
    perPortAarpInReqs               Counter,
    perPortAarpOutReqs              Counter,
    perPortAarpInRsps               Counter,
    perPortAarpOutRsps              Counter,
    perPortDdpInReceives            Counter,
    perPortDdpInLocalDatagrams      Counter,
    perPortDdpNoProtocolHandlers    Counter,
    perPortDdpTooShortErrors        Counter,
    perPortDdpTooLongErrors         Counter,
    perPortDdpChecksumErrors        Counter,
    perPortDdpForwRequests          Counter,
    perPortRtmpInDataPkts           Counter,
    perPortRtmpOutDataPkts          Counter,
    perPortRtmpInRequestPkts        Counter,
    perPortRtmpRouteDeletes         Counter,
    perPortZipInZipQueries          Counter,
    perPortZipInZipReplies          Counter,
    perPortZipInZipExtendedReplies  Counter,
    perPortZipZoneConflictErrors    Counter,
    perPortZipInErrors              Counter,

    perPortNbpInLookUpRequests      Counter,
    perPortNbpInLookUpReplies       Counter,
    perPortNbpInBroadcastRequests   Counter,
    perPortNbpInForwardRequests     Counter,
    perPortNbpOutLookUpReplies      Counter,
    perPortNbpRegistrationFailures  Counter,
    perPortNbpInErrors              Counter,
    perPortEchoRequests             Counter,
    perPortEchoReplies              Counter
}

perPortAarpInProbes OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of AARP Probe packets received
        by this entity on this port."
    ::= { perPortEntry 1 }

perPortAarpOutProbes OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of AARP Probe packets sent by
        this entity on this port."
    ::= { perPortEntry 2 }

perPortAarpInReqs OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of AARP Request packets received
        by this entity on this port."
    ::= { perPortEntry 3 }

perPortAarpOutReqs OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of AARP Request packets sent by
        this entity on this port."
    ::= { perPortEntry 4 }



perPortAarpInRsps OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of AARP Response packets received
        by this entity on this port."
    ::= { perPortEntry 5 }

perPortAarpOutRsps OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of AARP Response packets sent by
        this entity on this port."
    ::= { perPortEntry 6 }


perPortDdpInReceives OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of input datagrams received by DDP
        on this port, including those received in error."
    ::= { perPortEntry 7 }

perPortDdpInLocalDatagrams OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of input DDP datagrams on this
        port for which this entity was their final DDP
        destination."
    ::= { perPortEntry 8 }

perPortDdpNoProtocolHandlers OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of DDP datagrams addressed to this
        entity on this port that were addressed to an upper
        layer protocol for which no protocol handler
        existed."
    ::= { perPortEntry 9 }

perPortDdpTooShortErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of input DDP datagrams on this
        port dropped because the received data length was
        less than the data length specified in the DDP
        header or the received data length was less than the
        length of the expected DDP header."
    ::= { perPortEntry 10 }

perPortDdpTooLongErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of input DDP datagrams on this
        port dropped because they exceeded the maximum DDP
        datagram size."
    ::= { perPortEntry 11 }

perPortDdpChecksumErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of input DDP datagrams on this
        port for which this DDP entity was their final
        destination, and which were dropped because of a
        checksum error." ::= { perPortEntry 12 }

perPortDdpForwRequests OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of input datagrams on this port for
        which this entity was not their final DDP
        destination, as a result of which an attempt was
        made to find a route to forward them to that final
        destination."
    ::= { perPortEntry 13 }


perPortRtmpInDataPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only

    STATUS mandatory
    DESCRIPTION
        "A count of the number of good RTMP data packets
        received by this entity on this port."
    ::= { perPortEntry 14 }

perPortRtmpOutDataPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A count of the number of RTMP packets sent by this
        entity on this port."
    ::= { perPortEntry 15 }

perPortRtmpInRequestPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A count of the number of good RTMP Request packets
        received by this entity on this port."
    ::= { perPortEntry 16 }

perPortRtmpRouteDeletes OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A count of the number of times RTMP deletes a route
        on this port because it was aged out of the table."
    ::= { perPortEntry 17 }


perPortZipInZipQueries OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ZIP Queries received by this entity
        on this port."
    ::= { perPortEntry 18 }

perPortZipInZipReplies OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION

        "The number of ZIP Replies received by this entity
        on this port."
    ::= { perPortEntry 19 }

perPortZipInZipExtendedReplies OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ZIP Extended Replies received by this
        entity on this port."
    ::= { perPortEntry 20 }

perPortZipZoneConflictErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times a conflict has been detected on
        this port between this entity's zone information and
        another entity's zone information."
    ::= { perPortEntry 21 }

perPortZipInErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of ZIP packets received by this entity
        on this port that were rejected for any error."
    ::= { perPortEntry 22 }


perPortNbpInLookUpRequests OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of NBP LookUp Requests received on this
        port."
    ::= { perPortEntry 23 }

perPortNbpInLookUpReplies OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of NBP LookUp Replies received on this

        port."
    ::= { perPortEntry 24 }

perPortNbpInBroadcastRequests OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of NBP Broadcast Requests received on
        this port."
    ::= { perPortEntry 25 }

perPortNbpInForwardRequests OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of NBP Forward Requests received on this
        port."
    ::= { perPortEntry 26 }

perPortNbpOutLookUpReplies OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of NBP LookUp Replies sent on this port."
    ::= { perPortEntry 27 }

perPortNbpRegistrationFailures OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times this node experienced a failure
        in attempting to register an NBP entity on this
        port."
    ::= { perPortEntry 28 }

perPortNbpInErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of NBP packets received by this entity
        on this port that were rejected for any error."
    ::= { perPortEntry 29 }


perPortEchoRequests OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of AppleTalk Echo requests received on
        this port."
    ::= { perPortEntry 30 }

perPortEchoReplies OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The count of AppleTalk Echo replies received on
        this port."
    ::= { perPortEntry 31 }

END