DSA-MIB device MIB details by RFC
DSA-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing DSA-MIB.
| Vendor: | RFC |
|---|---|
| Mib: | DSA-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- WinAgents MIB Extraction Wizard -- Extracted from rfc1567.txt 16.03.2005 20:20:19 DSA-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, TimeStamp, TEXTUAL-CONVENTION FROM SNMPv2-TC mib-2 FROM RFC1213-MIB applIndex, DistinguishedName FROM NETWORK-SERVICES-MIB; dsaMIB MODULE-IDENTITY LAST-UPDATED "9311250000Z" ORGANIZATION "IETF Mail and Directory Management Working Group" CONTACT-INFO " Glenn Mansfield Postal: AIC Systems Laboratory 6-6-3, Minami Yoshinari Aoba-ku, Sendai, 989-32 JP Tel: +81 22 279 3310 Fax: +81 22 279 3640 E-Mail: glenn@aic.co.jp" DESCRIPTION " The MIB module for monitoring Directory System Agents." ::= { mib-2 29 } dsaOpsTable OBJECT-TYPE SYNTAX SEQUENCE OF DsaOpsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The table holding information related to the DSA operations." ::= {dsaMIB 1} dsaOpsEntry OBJECT-TYPE SYNTAX DsaOpsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry containing operations related statistics for a DSA." INDEX { applIndex } ::= {dsaOpsTable 1} DsaOpsEntry ::= SEQUENCE { -- Bindings dsaAnonymousBinds Counter32, dsaUnauthBinds Counter32, dsaSimpleAuthBinds Counter32, dsaStrongAuthBinds Counter32, dsaBindSecurityErrors Counter32, -- In-coming operations dsaInOps Counter32, dsaReadOps Counter32, dsaCompareOps Counter32, dsaAddEntryOps Counter32, dsaRemoveEntryOps Counter32, dsaModifyEntryOps Counter32, dsaModifyRDNOps Counter32, dsaListOps Counter32, dsaSearchOps Counter32, dsaOneLevelSearchOps Counter32, dsaWholeTreeSearchOps Counter32, -- Out going operations dsaReferrals Counter32, dsaChainings Counter32, -- Errors dsaSecurityErrors Counter32, dsaErrors Counter32 } dsaAnonymousBinds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of anonymous binds to this DSA from DUAs since application start." ::= {dsaOpsEntry 1} dsaUnauthBinds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of un-authenticated binds to this DSA since application start." ::= {dsaOpsEntry 2} dsaSimpleAuthBinds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of binds to this DSA that were authenticated using simple authentication procedures since application start." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Section 8.1.2.1.1." ::= {dsaOpsEntry 3} dsaStrongAuthBinds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of binds to this DSA that were authenticated using the strong authentication procedures since application start. This includes the binds that were authenticated using external authentication procedures." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Sections 8.1.2.1.2 & 8.1.2.1.3." ::= {dsaOpsEntry 4} dsaBindSecurityErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of bind operations that have been rejected by this DSA due to inappropriateAuthentication or invalidCredentials." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Section 12.7.2" ::= {dsaOpsEntry 5} dsaInOps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of operations forwarded to this DSA from DUAs or other DSAs since application start up." ::= {dsaOpsEntry 6} dsaReadOps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of read operations serviced by this DSA since application startup." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Section 9.1." ::= {dsaOpsEntry 7} dsaCompareOps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of compare operations serviced by this DSA since application startup." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Section 9.2." ::= {dsaOpsEntry 8} dsaAddEntryOps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of addEntry operations serviced by this DSA since application startup." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Section 11.1." ::= {dsaOpsEntry 9} dsaRemoveEntryOps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of removeEntry operations serviced by this DSA since application startup." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Section 11.2." ::= {dsaOpsEntry 10} dsaModifyEntryOps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of modifyEntry operations serviced by this DSA since application startup." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Section 11.3." ::= {dsaOpsEntry 11} dsaModifyRDNOps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of modifyRDN operations serviced by this DSA since application startup." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Section 11.4." ::= {dsaOpsEntry 12} dsaListOps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of list operations serviced by this DSA since application startup." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Section 10.1." ::= {dsaOpsEntry 13} dsaSearchOps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of search operations- baseObjectSearches, oneLevelSearches and subTreeSearches, serviced by this DSA since application startup." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Section 10.2." ::= {dsaOpsEntry 14} dsaOneLevelSearchOps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of oneLevelSearch operations serviced by this DSA since application startup." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Section 10.2.2.2." ::= {dsaOpsEntry 15} dsaWholeTreeSearchOps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of wholeTreeSearch operations serviced by this DSA since application startup." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Section 10.2.2.2." ::= {dsaOpsEntry 16} dsaReferrals OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of referrals returned by this DSA in response to requests for operations since application startup." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Section 12.6." ::= {dsaOpsEntry 17} dsaChainings OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of operations forwarded by this DSA to other DSAs since application startup." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.518, 1988: Section 14." ::= {dsaOpsEntry 18} dsaSecurityErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of operations forwarded to this DSA which did not meet the security requirements. " REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Section 12.7." ::= {dsaOpsEntry 19} dsaErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of operations that could not be serviced due to errors other than security errors, and referrals. A partially serviced operation will not be counted as an error. The errors include NameErrors, UpdateErrors, Attribute errors and ServiceErrors." REFERENCE " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988: Sections 12.4, 12.5, 12.8 & 12.9." ::= {dsaOpsEntry 20} -- Entry statistics/Cache performance dsaEntriesTable OBJECT-TYPE SYNTAX SEQUENCE OF DsaEntriesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The table holding information related to the entry statistics and cache performance of the DSAs." ::= {dsaMIB 2} dsaEntriesEntry OBJECT-TYPE SYNTAX DsaEntriesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry containing statistics pertaining to entries held by a DSA." INDEX { applIndex } ::= {dsaEntriesTable 1} DsaEntriesEntry ::= SEQUENCE { dsaMasterEntries Gauge32, dsaCopyEntries Gauge32, dsaCacheEntries Gauge32, dsaCacheHits Counter32, dsaSlaveHits Counter32 } dsaMasterEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of entries mastered in the DSA." ::= {dsaEntriesEntry 1} dsaCopyEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of entries for which systematic (slave) copies are maintained in the DSA." ::= {dsaEntriesEntry 2} dsaCacheEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of entries cached (non-systematic copies) in the DSA. This will include the entries that are cached partially. The negative cache is not counted." ::= {dsaEntriesEntry 3} dsaCacheHits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of operations that were serviced from the locally held cache since application startup." ::= {dsaEntriesEntry 4} dsaSlaveHits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of operations that were serviced from the locally held object replications [ shadow entries] since application startup." ::= {dsaEntriesEntry 5} -- The dsaIntTable contains statistical data on the peer DSAs -- with which the monitored DSAs [attempt to] interact. This -- table will provide a useful insight into the effect of -- neighbours on the DSA performance. -- The table keeps track of the last "N" DSAs with which the -- monitored DSAs has interacted [attempted to interact], -- where "N" is a locally-defined constant. dsaIntTable OBJECT-TYPE SYNTAX SEQUENCE OF DsaIntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Each row of this table contains some details related to the history of the interaction of the monitored DSAs with their respective peer DSAs." ::= { dsaMIB 3 } dsaIntEntry OBJECT-TYPE SYNTAX DsaIntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry containing interaction details of a DSA with a peer DSA." INDEX { applIndex,dsaIntIndex } ::= { dsaIntTable 1 } DsaIntEntry ::= SEQUENCE { dsaIntIndex INTEGER, dsaName DistinguishedName, dsaTimeOfCreation TimeStamp, dsaTimeOfLastAttempt TimeStamp, dsaTimeOfLastSuccess TimeStamp, dsaFailuresSinceLastSuccess Counter32, dsaFailures Counter32, dsaSuccesses Counter32 } dsaIntIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Together with applIndex it forms the unique key to identify the conceptual row which contains useful info on the (attempted) interaction between the DSA (referred to by applIndex) and a peer DSA." ::= {dsaIntEntry 1} dsaName OBJECT-TYPE SYNTAX DistinguishedName MAX-ACCESS read-only STATUS current DESCRIPTION " Distinguished Name of the peer DSA to which this entry pertains." ::= {dsaIntEntry 2} dsaTimeOfCreation OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION " The value of sysUpTime when this row was created. If the entry was created before the network management subsystem was initialized, this object will contain a value of zero." ::= {dsaIntEntry 3} dsaTimeOfLastAttempt OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION " The value of sysUpTime when the last attempt was made to contact this DSA. If the last attempt was made before the network management subsystem was initialized, this object will contain a value of zero." ::= {dsaIntEntry 4} dsaTimeOfLastSuccess OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION " The value of sysUpTime when the last attempt made to contact this DSA was successful. If there have been no successful attempts this entry will have a value of zero. If the last successful attempt was made before the network management subsystem was initialized, this object will contain a value of zero." ::= {dsaIntEntry 5} dsaFailuresSinceLastSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of failures since the last time an attempt to contact this DSA was successful. If there has been no successful attempts, this counter will contain the number of failures since this entry was created." ::= {dsaIntEntry 6} dsaFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Cumulative failures since the creation of this entry." ::= {dsaIntEntry 7} dsaSuccesses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Cumulative successes since the creation of this entry." ::= {dsaIntEntry 8} -- Conformance information dsaConformance OBJECT IDENTIFIER ::= { dsaMIB 4 } dsaGroups OBJECT IDENTIFIER ::= { dsaConformance 1 } dsaCompliances OBJECT IDENTIFIER ::= { dsaConformance 2 } -- Compliance statements dsaOpsCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMPv2 entities which implement the DSA-MIB for monitoring DSA operations." MODULE -- this module MANDATORY-GROUPS { dsaOpsGroup } ::= { dsaCompliances 1 } dsaEntryCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMPv2 entities which implement the DSA-MIB for monitoring DSA operations, entry statistics and cache performance." MODULE -- this module MANDATORY-GROUPS { dsaOpsGroup,dsaEntryGroup } ::= { dsaCompliances 2 } dsaIntCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION " The compliance statement for SNMPv2 entities which implement the DSA-MIB for monitoring DSA operations and the interaction of the DSA with peer DSAs." MODULE -- this module MANDATORY-GROUPS { dsaOpsGroup, dsaIntGroup } ::= { dsaCompliances 3 } -- Units of conformance dsaOpsGroup OBJECT-GROUP OBJECTS { dsaAnonymousBinds, dsaUnauthBinds, dsaSimpleAuthBinds, dsaStrongAuthBinds, dsaBindSecurityErrors,dsaInOps, dsaReadOps, dsaCompareOps, dsaAddEntryOps, dsaRemoveEntryOps, dsaModifyEntryOps, dsaModifyRDNOps, dsaListOps, dsaSearchOps, dsaOneLevelSearchOps, dsaWholeTreeSearchOps,dsaReferrals, dsaChainings, dsaSecurityErrors, dsaErrors} STATUS current DESCRIPTION " A collection of objects for monitoring the DSA operations." ::= { dsaGroups 1 } dsaEntryGroup OBJECT-GROUP OBJECTS {dsaMasterEntries, dsaCopyEntries, dsaCacheEntries, dsaCacheHits, dsaSlaveHits} STATUS current DESCRIPTION " A collection of objects for monitoring the DSA entry statistics and cache performance." ::= { dsaGroups 2 } dsaIntGroup OBJECT-GROUP OBJECTS { dsaName, dsaTimeOfCreation, dsaTimeOfLastAttempt, dsaTimeOfLastSuccess,dsaFailuresSinceLastSuccess,dsaFailures, dsaSuccesses} STATUS current DESCRIPTION " A collection of objects for monitoring the DSA's interaction with peer DSAs." ::= { dsaGroups 3 } END