| frsldPvcCtrlDlci |
.1.3.6.1.2.1.95.1.1.1.1 |
|
The value of this object is equal to the DLCI
value for this PVC.
|
| frsldPvcCtrlTransmitRP |
.1.3.6.1.2.1.95.1.1.1.2 |
|
The reference point this PVC uses for calculation
of transmitter related statistics. This object
together with frsldPvcCtrlReceiveRP define the
measurement domain.
|
| frsldPvcCtrlReceiveRP |
.1.3.6.1.2.1.95.1.1.1.3 |
|
The reference point this PVC uses for calculation
of receiver related statistics. This object
together with frsldPvcCtrlTransmitRP define the
measurement domain.
|
| frsldPvcCtrlStatus |
.1.3.6.1.2.1.95.1.1.1.4 |
|
The status of the current row. This object is
used to add, delete, and disable rows in this
table. When the status changes to active(1) for the
first time, a row will also be added to the data
table below. This row SHOULD not be removed until
the status is changed to deleted.
When this object is set to destroy(6), all associated
sample and data table rows will also be deleted.
When this object is changed from active(1) to any
other valid value, the defined purge behavior will
affect the data and sample tables.
The rows added to this table MUST have a valid
ifIndex and an ifType related to frame relay. Further,
the reference points referred to by frsldPvcCtrlTransmitRP
and frsldPvcCtrlReceiveRP MUST be supported (see the
frsldRPCaps object).
If at any point the row is not in the active(1) state
and the DLCI no longer exists, the state SHOULD
report notReady(3).
The data in this table SHOULD persist through power
cycles. The symantics of readiness for the rows still
applies. This means that it is possible for a row to be
reprovisioned as notReady(3) if the underlying DLCI does
not persist.
|
| frsldPvcCtrlPacketFreq |
.1.3.6.1.2.1.95.1.1.1.5 |
|
The frequency in seconds between initiation of
specialized packets used to collect delay and / or
delivery information as supported by the device.
A value of zero indicates that no packets will
be sent.
|
| frsldPvcCtrlDelayFrSize |
.1.3.6.1.2.1.95.1.1.1.6 |
|
The size of the payload in the frame used for
calculation of network delay.
|
| frsldPvcCtrlDelayType |
.1.3.6.1.2.1.95.1.1.1.7 |
|
The type of delay measurement performed.
|
| frsldPvcCtrlDelayTimeOut |
.1.3.6.1.2.1.95.1.1.1.8 |
|
A delay frame will count as a missed poll if
it is not updated in the time specified by
frsldPvcCtrlDelayTimeOut.
|
| frsldPvcCtrlPurge |
.1.3.6.1.2.1.95.1.1.1.9 |
|
This object defines the amount of time the device
will wait, after discovering that a DLCI does not exist,
the DLCI was deleted or the value of frsldPvcCtrlStatus
changes from active(1) to either notInService(2) or
notReady(3), prior to automatically purging the history
in the sample tables and resetting the data in the data
tables to all zeroes. If frsldPvcCtrlStatus is manually
set to destroy(6), this object does not apply.
|
| frsldPvcCtrlDeleteOnPurge |
.1.3.6.1.2.1.95.1.1.1.10 |
|
This object defines whether rows will
automatically be deleted from the tables
when the information is purged.
- A value of none(1) indicates that no rows
will deleted. The last known values will
be preserved.
- A value of sampleControls(2) indicates
that all associated sample control rows
will be deleted.
- A value of all(3) indicates that all
associated rows SHOULD be deleted.
|
| frsldPvcCtrlLastPurgeTime |
.1.3.6.1.2.1.95.1.1.1.11 |
|
This object returns the value of sysUpTime
at the time the information was last purged.
This value SHOULD be set to the sysUpTime
upon setting frsldPvcCtrlStatus to active(1)
for the first time. Each time a
discontinuity in the counters occurs, this
value MUST be set to the sysUpTime.
If frsldPvcCtrlStatus has never been active(1),
this object SHOULD return 0.
This object SHOULD be used as the discontinuity
timer for the counters in frsldPvcDataTable.
|
| frsldSmplCtrlIdx |
.1.3.6.1.2.1.95.1.2.1.1 |
|
The unique index for this row in the
sample control table.
|
| frsldSmplCtrlStatus |
.1.3.6.1.2.1.95.1.2.1.2 |
|
The status of the current row. This object is
used to add, delete, and disable rows in this
table. This row SHOULD NOT be removed until the
status is changed to destroy(6). When the status
changes to active(1), the collection in the sample
tables below will be activated.
The rows added to this table MUST have a valid
ifIndex, an ifType related to frame relay,
frsldPvcCtrlDlci MUST exist for the specified
ifIndex and frsldPvcCtrlStatus MUST have a
value of active(1).
The value of frsldPvcCtrlStatus MUST be active(1)
to transition this object to active(1). If
the value of frsldPvcCtrlStatus becomes anything
other than active(1) when the state of this object
is not active(1), this object SHOULD be set to
notReady(3).
The data in this table SHOULD persist through power
cycles. The symantics of readiness for the rows still
applies. This means that it is possible for a row to be
reprovisioned as notReady(3) if the underlying DLCI does
not persist.
|
| frsldSmplCtrlColPeriod |
.1.3.6.1.2.1.95.1.2.1.3 |
|
The amount of time in seconds that defines a
period of collection for the statistics.
At the end of each period, the statistics will be
sampled and a row is added to the sample table.
|
| frsldSmplCtrlBuckets |
.1.3.6.1.2.1.95.1.2.1.4 |
|
The number of discrete buckets over which the
data statistics are sampled.
When this object is created or modified, the device
SHOULD attempt to set the frsldSmplCtrlBuckets-
Granted to a value as close as is possible
depending upon the implementation and the available
resources.
|
| frsldSmplCtrlBucketsGranted |
.1.3.6.1.2.1.95.1.2.1.5 |
|
The number of discrete buckets granted. This
object will return 0 until frsldSmplCtrlStatus is
set to active(1). At that time the buckets will be
allocated depending upon implementation and
available resources.
|
| frsldPvcDataMissedPolls |
.1.3.6.1.2.1.95.1.3.1.1 |
|
The total number of polls that have been determined
to be missed. These polls are typically associated
with the calculation of delay but may also be
used for the calculation of other statistics. If an
anticipated poll is not received in a reasonable
amount of time, it should be counted as missed.
The value used to determine the reasonable amount
of time is contained in frsldPvcCtrlDelayTimeOut.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataFrDeliveredC |
.1.3.6.1.2.1.95.1.3.1.2 |
|
The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataFrDeliveredE |
.1.3.6.1.2.1.95.1.3.1.3 |
|
The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataFrOfferedC |
.1.3.6.1.2.1.95.1.3.1.4 |
|
The number of frames that were offered through
frsldPvcCtrlTransmitRP within CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataFrOfferedE |
.1.3.6.1.2.1.95.1.3.1.5 |
|
The number of frames that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataDataDeliveredC |
.1.3.6.1.2.1.95.1.3.1.6 |
|
The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataDataDeliveredE |
.1.3.6.1.2.1.95.1.3.1.7 |
|
The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataDataOfferedC |
.1.3.6.1.2.1.95.1.3.1.8 |
|
The number of octets that were offered through
frsldPvcCtrlTransmitRP within CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataDataOfferedE |
.1.3.6.1.2.1.95.1.3.1.9 |
|
The number of octets that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataHCFrDeliveredC |
.1.3.6.1.2.1.95.1.3.1.10 |
|
The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR. This object is a 64-bit version
of frsldPvcDataFrDeliveredC.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataHCFrDeliveredE |
.1.3.6.1.2.1.95.1.3.1.11 |
|
The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR. This object is a 64-bit
version of frsldPvcDataFrDeliveredE.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataHCFrOfferedC |
.1.3.6.1.2.1.95.1.3.1.12 |
|
The number of frames that were offered through
frsldPvcCtrlTransmitRP within CIR. This object is
a 64-bit version of frsldPvcDataFrOfferedC.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataHCFrOfferedE |
.1.3.6.1.2.1.95.1.3.1.13 |
|
The number of frames that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR. This
object is a 64-bit version of frsldPvcDataFrOfferedE.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataHCDataDeliveredC |
.1.3.6.1.2.1.95.1.3.1.14 |
|
The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR. This object is a 64-bit version of
frsldPvcDataDataDeliveredC.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataHCDataDeliveredE |
.1.3.6.1.2.1.95.1.3.1.15 |
|
The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR. This object is a 64-bit
version of frsldPvcDataDataDeliveredE.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataHCDataOfferedC |
.1.3.6.1.2.1.95.1.3.1.16 |
|
The number of octets that were offered through
frsldPvcCtrlTransmitRP within CIR. This object is
a 64-bit version of frsldPvcDataDataOfferedC.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataHCDataOfferedE |
.1.3.6.1.2.1.95.1.3.1.17 |
|
The number of octets that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR.
This object is a 64-bit version of
frsldPvcDataDataOfferedE.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcDataUnavailableTime |
.1.3.6.1.2.1.95.1.3.1.18 |
|
The amount of time this PVC was declared unavailable
for any reason since this row was created.
|
| frsldPvcDataUnavailables |
.1.3.6.1.2.1.95.1.3.1.19 |
|
The number of times this PVC was declared unavailable
for any reason since this row was created.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime.
|
| frsldPvcSmplIdx |
.1.3.6.1.2.1.95.1.4.1.1 |
|
The bucket index of the current sample. This
increments once for each new bucket in the
table.
|
| frsldPvcSmplDelayMin |
.1.3.6.1.2.1.95.1.4.1.2 |
|
The minimum delay reported in microseconds measured
for any information packet that arrived during this
interval.
A value of zero means that no data is available.
|
| frsldPvcSmplDelayMax |
.1.3.6.1.2.1.95.1.4.1.3 |
|
The largest delay reported in microseconds measured
for any information packet that arrived during this
interval.
A value of zero means that no data is available.
|
| frsldPvcSmplDelayAvg |
.1.3.6.1.2.1.95.1.4.1.4 |
|
The average delay reported in microseconds measured
for all delay packets that arrived during this
interval.
A value of zero means that no data is available.
|
| frsldPvcSmplMissedPolls |
.1.3.6.1.2.1.95.1.4.1.5 |
|
The total number of polls that were missed during
this interval.
|
| frsldPvcSmplFrDeliveredC |
.1.3.6.1.2.1.95.1.4.1.6 |
|
The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR during this interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCFrDeliveredC.
|
| frsldPvcSmplFrDeliveredE |
.1.3.6.1.2.1.95.1.4.1.7 |
|
The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR during this interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCFrDeliveredE.
|
| frsldPvcSmplFrOfferedC |
.1.3.6.1.2.1.95.1.4.1.8 |
|
The number of frames that were offered through
frsldPvcCtrlTransmitRP within CIR during this
interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCFrOfferedC.
|
| frsldPvcSmplFrOfferedE |
.1.3.6.1.2.1.95.1.4.1.9 |
|
The number of frames that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR
during this interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCFrOfferedE.
|
| frsldPvcSmplDataDeliveredC |
.1.3.6.1.2.1.95.1.4.1.10 |
|
The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR during this interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCDataDeliveredC.
|
| frsldPvcSmplDataDeliveredE |
.1.3.6.1.2.1.95.1.4.1.11 |
|
The number of octets that were received at
frsldPvcCtrlDeliveredRP and determined to have been
sent in excess of the CIR during this interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCDataDeliveredE.
|
| frsldPvcSmplDataOfferedC |
.1.3.6.1.2.1.95.1.4.1.12 |
|
The number of octets that were offered through
frsldPvcCtrlTransmitRP within CIR during this
interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCDataOfferredC.
|
| frsldPvcSmplDataOfferedE |
.1.3.6.1.2.1.95.1.4.1.13 |
|
The number of octets that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR
during this interval.
If it is the case that the high capacity counters
are also used, this MUST report the value of the
lower 32 bits of the CounterBasedGauge64 value of
frsldPvcSmplHCDataOfferedE.
|
| frsldPvcSmplHCFrDeliveredC |
.1.3.6.1.2.1.95.1.4.1.14 |
|
The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR during this interval. This object
is a 64-bit version of frsldPvcSmplFrDeliveredC.
|
| frsldPvcSmplHCFrDeliveredE |
.1.3.6.1.2.1.95.1.4.1.15 |
|
The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR during this interval.
This object is a 64-bit version of frsldPvcSmpl-
FrDeliveredE.
|
| frsldPvcSmplHCFrOfferedC |
.1.3.6.1.2.1.95.1.4.1.16 |
|
The number of frames that were offered through
frsldPvcCtrlTransmitRP within CIR during this
interval. This object is a 64-bit version of
frsldPvcSmplFrOfferedC.
|
| frsldPvcSmplHCFrOfferedE |
.1.3.6.1.2.1.95.1.4.1.17 |
|
The number of frames that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR
during this interval. This object is a 64-bit
version of frsldPvcSmplFrOfferedE.
|
| frsldPvcSmplHCDataDeliveredC |
.1.3.6.1.2.1.95.1.4.1.18 |
|
The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR during this interval. This value
is a 64-bit version of frsldPvcSmplDataDeliveredC.
|
| frsldPvcSmplHCDataDeliveredE |
.1.3.6.1.2.1.95.1.4.1.19 |
|
The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR during this interval. This
value is a 64-bit version of frsldPvcSmplData-
DeliveredE.
|
| frsldPvcSmplHCDataOfferedC |
.1.3.6.1.2.1.95.1.4.1.20 |
|
The number of octets that were offered through
frsldPvcCtrlTransmitRP within CIR during this
interval. This value is a 64-bit version of
frsldPvcSmplDataOfferedC.
|
| frsldPvcSmplHCDataOfferedE |
.1.3.6.1.2.1.95.1.4.1.21 |
|
The number of octets that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR
during this interval. This object is a 64-bit
version of frsldPvcSmplDataOfferedE.
|
| frsldPvcSmplUnavailableTime |
.1.3.6.1.2.1.95.1.4.1.22 |
|
The amount of time this PVC was declared
unavailable for any reason during this interval.
|
| frsldPvcSmplUnavailables |
.1.3.6.1.2.1.95.1.4.1.23 |
|
The number of times this PVC was declared
unavailable for any reason during this interval.
|
| frsldPvcSmplStartTime |
.1.3.6.1.2.1.95.1.4.1.24 |
|
The value of sysUpTime when this sample interval
started.
|
| frsldPvcSmplEndTime |
.1.3.6.1.2.1.95.1.4.1.25 |
|
The value of sysUpTime when this sample interval
ended. No data will be reported and the row will
not appear in the table until the sample has
been collected.
|
| frsldPvcReqCtrlGroup |
.1.3.6.1.2.1.95.3.1.1 |
|
A collection of required objects providing
control information applicable to a PVC which
implements Service Level Definitions.
|
| frsldPvcReqDataGroup |
.1.3.6.1.2.1.95.3.1.5 |
|
A collection of required objects providing data
collected on a PVC which implements Service
Level Definitions.
|
| frsldCapabilitiesGroup |
.1.3.6.1.2.1.95.3.1.15 |
|
A collection of required objects providing
capability information and control for this
MIB module.
|
| frsldPvcHCFrameDataGroup |
.1.3.6.1.2.1.95.3.1.7 |
|
A collection of optional objects providing high
capacity frame data collected on a PVC which
implements Service Level Definitions.
|
| frsldPvcHCOctetDataGroup |
.1.3.6.1.2.1.95.3.1.8 |
|
A collection of optional objects providing high
capacity octet data collected on a PVC which
implements Service Level Definitions.
|
| frsldPvcPacketGroup |
.1.3.6.1.2.1.95.3.1.2 |
|
A collection of optional objects providing packet
level control information applicable to a PVC which
implements Service Level Definitions.
|
| frsldPvcDelayCtrlGroup |
.1.3.6.1.2.1.95.3.1.3 |
|
A collection of optional objects providing delay
control information applicable to a PVC which
implements Service Level Definitions.
If this group is implemented, frsldPvcPacketGroup
and frsldPvcDelayDataGroup MUST also be implemented.
|
| frsldPvcSampleCtrlGroup |
.1.3.6.1.2.1.95.3.1.4 |
|
A collection of optional objects providing sample
control information applicable to a PVC which
implements Service Level Definitions.
If this group is implemented, frsldPvcReqDataGroup
and frsldPvcSampleGeneralGroup MUST also be
implemented.
|
| frsldPvcDelayDataGroup |
.1.3.6.1.2.1.95.3.1.6 |
|
A collection of optional objects providing delay
data collected on a PVC which implements Service
Level Definitions.
If this group is implemented, frsldPvcDelayCtrlGroup
MUST also be implemented.
|
| frsldPvcSampleDelayGroup |
.1.3.6.1.2.1.95.3.1.9 |
|
A collection of optional objects providing delay
sample data collected on a PVC which implements
Service Level Definitions.
If this group is implemented, frsldPvcDelayCtrlGroup
MUST also be implemented.
|
| frsldPvcSampleDataGroup |
.1.3.6.1.2.1.95.3.1.10 |
|
A collection of optional objects providing data
and frame delivery sample data collected on a PVC
which implements Service Level Definitions.
If this group is implemented, frsldPvcReqDataGroup
MUST also be implemented.
|
| frsldPvcSampleHCFrameGroup |
.1.3.6.1.2.1.95.3.1.11 |
|
A collection of optional objects providing high
capacity frame delivery sample data collected on a PVC
which implements Service Level Definitions.
If this group is implemented, frsldPvcHCFrameDataGroup
MUST also be implemented.
|
| frsldPvcSampleHCDataGroup |
.1.3.6.1.2.1.95.3.1.12 |
|
A collection of optional objects providing high
capacity data delivery sample data collected on a PVC
which implements Service Level Definitions.
If this group is implemented, frsldPvcHCOctetDataGroup
MUST also be implemented.
|
| frsldPvcSampleAvailGroup |
.1.3.6.1.2.1.95.3.1.13 |
|
A collection of optional objects providing
availability sample data collected on a PVC which
implements Service Level Definitions.
If this group is implemented, frsldPvcReqDataGroup
MUST also be implemented.
|
| frsldPvcSampleGeneralGroup |
.1.3.6.1.2.1.95.3.1.14 |
|
A collection of optional objects providing
general sample data collected on a PVC which
implements Service Level Definitions.
|
