AD | Application | AWS | Azure | Cloud | Database | Enterprise | Environmental | Event Log | File System | IoT | IT Service | Network/System | Infra | Performance | Protocol | SaaS | Security | Service Level | Storage | Linux | VMware | VoIP | Web | Wireless | SNMP

Crumbtrail

MonitorTools.com » Technical documentation » SNMP » MIB » RFC » HPR-IP-MIB » Objects

HPR-IP-MIB.mib object view, vendor RFC

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2024 can import MIB file HPR-IP-MIB and use it to monitor vendor specific OID's.

HPR-IP-MIB file content

Object view of HPR-IP-MIB:

Scalar Object
hprIpActiveLsEntry .1.3.6.1.2.1.34.6.1.5.1.1
Entry of the HPR/IP link station table.
hprIpAppnPortEntry .1.3.6.1.2.1.34.6.1.5.2.1
Entry of the HPR/IP APPN port table. Entries exist for every APPN port defined to support HPR over IP.
hprIpLsEntry .1.3.6.1.2.1.34.6.1.5.3.1
Entry of the HPR/IP link station table.
hprIpCnEntry .1.3.6.1.2.1.34.6.1.5.4.1
Entry of the HPR/IP connection network table.
Tabular Object
hprIpActiveLsLsName .1.3.6.1.2.1.34.6.1.5.1.1.1
Administratively assigned name for the link station. If this object has the same value as the appnLsName in the APPN MIB, then the two objects are referring to the same APPN link station.
hprIpActiveLsAppnTrafficType .1.3.6.1.2.1.34.6.1.5.1.1.2
APPN traffic type being sent through the link station.
hprIpActiveLsUdpPackets .1.3.6.1.2.1.34.6.1.5.1.1.3
The count of outgoing UDP packets carrying this type of APPN traffic. A discontinuity in the counter is indicated by the appnLsCounterDisconTime object in the APPN MIB.
hprIpAppnPortName .1.3.6.1.2.1.34.6.1.5.2.1.1
Administratively assigned name for this APPN port. If this object has the same value as the appnPortName in the APPN MIB, then the two objects are referring to the same APPN port.
hprIpAppnPortAppnTrafficType .1.3.6.1.2.1.34.6.1.5.2.1.2
APPN traffic type sent through the port.
hprIpAppnPortTOSPrecedence .1.3.6.1.2.1.34.6.1.5.2.1.3
A setting for the three TOS Precedence bits in the IP Type of Service field for this APPN traffic type. When this value is changed via a Set operation, the new setting for the TOS Precedence bits takes effect immediately, rather than waiting for some event such as reinitialization of the port or of the APPN node itself.
hprIpLsLsName .1.3.6.1.2.1.34.6.1.5.3.1.1
Administratively assigned name for the link station. If this object has the same value as the appnLsName in the APPN MIB, then the two objects are referring to the same APPN link station.
hprIpLsAppnTrafficType .1.3.6.1.2.1.34.6.1.5.3.1.2
APPN traffic type sent through the link station.
hprIpLsTOSPrecedence .1.3.6.1.2.1.34.6.1.5.3.1.3
A setting for the three TOS Precedence bits in the IP Type of Service field for this APPN traffic type. When this value is changed via a Set operation, the new setting for the TOS Precedence bits takes effect immediately, rather than waiting for some event such as reinitialization of the port or of the APPN node itself.
hprIpLsRowStatus .1.3.6.1.2.1.34.6.1.5.3.1.4
This object allows entries to be created and deleted in the hprIpLsTable. As soon as an entry becomes active, the mapping between APPN traffic types and TOS Precedence settings that it specifies becomes effective. The value of the other accessible object in this entry, hprIpLsTOSPrecedence, can be changed via a Set operation when this object's value is active(1). An entry in this table is deleted by setting this object to destroy(6). Deleting an entry in this table causes the link station to revert to the default TOS Precedence mapping for its port.
hprIpCnVrnName .1.3.6.1.2.1.34.6.1.5.4.1.1
SNA control point name of the virtual routing node (VRN) that identifies the connection network in the APPN topology database. If this object has the same value as the appnVrnName in the APPN MIB, then the two objects are referring to the same APPN VRN.
hprIpCnAppnTrafficType .1.3.6.1.2.1.34.6.1.5.4.1.2
APPN traffic type sent to this connection network.
hprIpCnTOSPrecedence .1.3.6.1.2.1.34.6.1.5.4.1.3
A setting for the three TOS Precedence bits in the IP Type of Service field for this APPN traffic type. This setting applies to all traffic sent to this connection network by this node, regardless of the port through which the traffic is sent. When this value is changed via a Set operation, the new setting for the TOS Precedence bits takes effect immediately, rather than waiting for some event such as reinitialization of a port or of the APPN node itself.
hprIpCnRowStatus .1.3.6.1.2.1.34.6.1.5.4.1.4
This object allows entries to be created and deleted in the hprIpCnTable. As soon as an entry becomes active, the mapping between APPN traffic types and TOS Precedence settings that it specifies becomes effective. The value of the other accessible object in this entry, hprIpCnTOSPrecedence, can be changed via a Set operation when this object's value is active(1). An entry in this table is deleted by setting this object to destroy(6). Deleting an entry in this table causes the connection network to revert to the default TOS Precedence mapping for each port through which it is accessed.
Table
hprIpActiveLsTable .1.3.6.1.2.1.34.6.1.5.1
The HPR/IP active link station table. This table provides counts of the number of UDP packets sent for each APPN traffic type.
hprIpAppnPortTable .1.3.6.1.2.1.34.6.1.5.2
The HPR/IP APPN port table. This table supports reading and setting the mapping between APPN traffic types and TOS Precedence settings for all the link stations at this APPN port. This mapping can be overridden for an individual link station or an individual connection network via, respectively, the hprIpLsTOSPrecedence and the hprIpCnTOSPrecedence objects.
hprIpLsTable .1.3.6.1.2.1.34.6.1.5.3
The HPR/IP link station table. Values for TOS Precedence at the link station level override those at the level of the containing port. If there is no entry in this table for a given link station, then that link station inherits its TOS Precedence values from its port.
hprIpCnTable .1.3.6.1.2.1.34.6.1.5.4
The HPR/IP connection network table. Values for TOS Precedence at the connection network level override those at the level of the containing port. If there is no entry in this table for a given connection network, then that connection network inherits its TOS Precedence values from its port. A node may have connections to a given connection network through multiple ports. There is no provision in the HPR-IP architecture for variations in TOS Precedence values for a single connection network based on the port through which traffic is flowing to the connection network. Thus an entry in this table overrides the port-level settings for all the ports through which the node can reach the connection network.
Object Identifier
hprIp .1.3.6.1.2.1.34.6.1.5
The MIB module for HPR over IP. This module contains two groups: - the HPR over IP Monitoring Group provides a count of the UDP packets sent by a link station for each APPN traffic type. - the HPR over IP Configuration Group provides for reading and setting the mappings between APPN traffic types and TOS Precedence settings in the IP header. These mappings are configured at the APPN port level, and are inherited by the APPN connection networks and link stations associated with an APPN port. A port-level mapping can, however, be overridden for a particular connection network or link station.
Group
hprIpMonitoringGroup .1.3.6.1.2.1.34.6.2.2.5
An object for counting outgoing HPR/IP traffic for each APPN traffic type.
hprIpConfigurationGroup .1.3.6.1.2.1.34.6.2.2.6
A collection of HPR/IP objects representing the mappings between APPN traffic types and TOS Precedence bits at the APPN port, APPN link station, and APPN connection network levels.