IP-FORWARD-MIB device MIB details by RFC
IP-FORWARD-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing IP-FORWARD-MIB.
| Vendor: | RFC |
|---|---|
| Mib: | IP-FORWARD-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- WinAgents MIB Extraction Wizard -- Extracted from rfc2096.txt 16.03.2005 20:21:45 IP-FORWARD-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, Gauge32 FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC ip FROM RFC1213-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; ipForward MODULE-IDENTITY LAST-UPDATED "9609190000Z" -- Thu Sep 26 16:34:47 PDT 1996 ORGANIZATION "IETF OSPF Working Group" CONTACT-INFO " Fred Baker Postal: Cisco Systems 519 Lado Drive Santa Barbara, California 93111 Phone: +1 805 681 0115 Email: fred@cisco.com " DESCRIPTION "The MIB module for the display of CIDR multipath IP Routes." REVISION "9609190000Z" DESCRIPTION "Revisions made by the OSPF WG." ::= { ip 24 } ipCidrRouteNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of current ipCidrRouteTable entries that are not invalid." ::= { ipForward 3 } -- IP CIDR Route Table -- The IP CIDR Route Table obsoletes and replaces the ipRoute -- Table current in MIB-I and MIB-II and the IP Forwarding Table. -- It adds knowledge of the autonomous system of the next hop, -- multiple next hops, and policy routing, and Classless -- Inter-Domain Routing. ipCidrRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's IP Routing table." REFERENCE "RFC 1213 Section 6.6, The IP Group" ::= { ipForward 4 } ipCidrRouteEntry OBJECT-TYPE SYNTAX IpCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destina- tion, under a particular policy." INDEX { ipCidrRouteDest, ipCidrRouteMask, ipCidrRouteTos, ipCidrRouteNextHop } ::= { ipCidrRouteTable 1 } IpCidrRouteEntry ::= SEQUENCE { ipCidrRouteDest IpAddress, ipCidrRouteMask IpAddress, ipCidrRouteTos Integer32, ipCidrRouteNextHop IpAddress, ipCidrRouteIfIndex Integer32, ipCidrRouteType INTEGER, ipCidrRouteProto INTEGER, ipCidrRouteAge Integer32, ipCidrRouteInfo OBJECT IDENTIFIER, ipCidrRouteNextHopAS Integer32, ipCidrRouteMetric1 Integer32, ipCidrRouteMetric2 Integer32, ipCidrRouteMetric3 Integer32, ipCidrRouteMetric4 Integer32, ipCidrRouteMetric5 Integer32, ipCidrRouteStatus RowStatus } ipCidrRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteMask object is not equal to x." ::= { ipCidrRouteEntry 1 } ipCidrRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipCidrRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipCidrRouteMask by reference to the IP Ad- dress Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteDest object is not equal to ipCidrRoute- Dest." ::= { ipCidrRouteEntry 2 } -- The following convention is included for specification -- of TOS Field contents. At this time, the Host Requirements -- and the Router Requirements documents disagree on the width -- of the TOS field. This mapping describes the Router -- Requirements mapping, and leaves room to widen the TOS field -- without impact to fielded systems. ipCidrRouteTos OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30" ::= { ipCidrRouteEntry 3 } ipCidrRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0." ::= { ipCidrRouteEntry 4 } ipCidrRouteIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex value which identifies the local interface through which the next hop of this route should be reached." DEFVAL { 0 } ::= { ipCidrRouteEntry 5 } ipCidrRouteType OBJECT-TYPE SYNTAX INTEGER { other (1), -- not specified by this MIB reject (2), -- route which discards traffic local (3), -- local interface remote (4) -- remote destination } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes which do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally. reject (2) refers to a route which, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes." ::= { ipCidrRouteEntry 6 } ipCidrRouteProto OBJECT-TYPE SYNTAX INTEGER { other (1), -- not specified local (2), -- local interface netmgmt (3), -- static route icmp (4), -- result of ICMP Redirect -- the following are all dynamic -- routing protocols egp (5), -- Exterior Gateway Protocol ggp (6), -- Gateway-Gateway Protocol hello (7), -- FuzzBall HelloSpeak rip (8), -- Berkeley RIP or RIP-II isIs (9), -- Dual IS-IS esIs (10), -- ISO 9542 ciscoIgrp (11), -- Cisco IGRP bbnSpfIgp (12), -- BBN SPF IGP ospf (13), -- Open Shortest Path First bgp (14), -- Border Gateway Protocol idpr (15), -- InterDomain Policy Routing ciscoEigrp (16) -- Cisco EIGRP } MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols." ::= { ipCidrRouteEntry 7 } ipCidrRouteAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned." DEFVAL { 0 } ::= { ipCidrRouteEntry 8 } ipCidrRouteInfo OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS current DESCRIPTION "A reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the route's ipCidrRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identif- ier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value." ::= { ipCidrRouteEntry 9 } ipCidrRouteNextHopAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant its value should be set to zero." DEFVAL { 0 } ::= { ipCidrRouteEntry 10 } ipCidrRouteMetric1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { ipCidrRouteEntry 11 } ipCidrRouteMetric2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { ipCidrRouteEntry 12 } ipCidrRouteMetric3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { ipCidrRouteEntry 13 } ipCidrRouteMetric4 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { ipCidrRouteEntry 14 } ipCidrRouteMetric5 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { ipCidrRouteEntry 15 } ipCidrRouteStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { ipCidrRouteEntry 16 } -- conformance information ipForwardConformance OBJECT IDENTIFIER ::= { ipForward 5 } ipForwardGroups OBJECT IDENTIFIER ::= { ipForwardConformance 1 } ipForwardCompliances OBJECT IDENTIFIER ::= { ipForwardConformance 2 } -- compliance statements ipForwardCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMPv2 entities which implement the ipForward MIB." MODULE -- this module MANDATORY-GROUPS { ipForwardCidrRouteGroup } ::= { ipForwardCompliances 1 } -- units of conformance ipForwardCidrRouteGroup OBJECT-GROUP OBJECTS { ipCidrRouteNumber, ipCidrRouteDest, ipCidrRouteMask, ipCidrRouteTos, ipCidrRouteNextHop, ipCidrRouteIfIndex, ipCidrRouteType, ipCidrRouteProto, ipCidrRouteAge, ipCidrRouteInfo, ipCidrRouteNextHopAS, ipCidrRouteMetric1, ipCidrRouteMetric2, ipCidrRouteMetric3, ipCidrRouteMetric4, ipCidrRouteMetric5, ipCidrRouteStatus } STATUS current DESCRIPTION "The CIDR Route Table." ::= { ipForwardGroups 3 } -- Obsoleted Definitions - Objects ipForwardNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of current ipForwardTable entries that are not invalid." ::= { ipForward 1 } -- IP Forwarding Table -- The IP Forwarding Table obsoletes and replaces the ipRoute -- Table current in MIB-I and MIB-II. It adds knowledge of -- the autonomous system of the next hop, multiple next hop -- support, and policy routing support. ipForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF IpForwardEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "This entity's IP Routing table." REFERENCE "RFC 1213 Section 6.6, The IP Group" ::= { ipForward 2 } ipForwardEntry OBJECT-TYPE SYNTAX IpForwardEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A particular route to a particular destina- tion, under a particular policy." INDEX { ipForwardDest, ipForwardProto, ipForwardPolicy, ipForwardNextHop } ::= { ipForwardTable 1 } IpForwardEntry ::= SEQUENCE { ipForwardDest IpAddress, ipForwardMask IpAddress, ipForwardPolicy Integer32, ipForwardNextHop IpAddress, ipForwardIfIndex Integer32, ipForwardType INTEGER, ipForwardProto INTEGER, ipForwardAge Integer32, ipForwardInfo OBJECT IDENTIFIER, ipForwardNextHopAS Integer32, ipForwardMetric1 Integer32, ipForwardMetric2 Integer32, ipForwardMetric3 Integer32, ipForwardMetric4 Integer32, ipForwardMetric5 Integer32 } ipForwardDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipForwardMask object is not equal to x." ::= { ipForwardEntry 1 } ipForwardMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipForwardDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipForwardMask by reference to the IP Ad- dress Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipForwardDest object is not equal to ipForward- Dest." DEFVAL { '00000000'h } -- 0.0.0.0 ::= { ipForwardEntry 2 } -- The following convention is included for specification -- of TOS Field contents. At this time, the Host Requirements -- and the Router Requirements documents disagree on the width -- of the TOS field. This mapping describes the Router -- Requirements mapping, and leaves room to widen the TOS field -- without impact to fielded systems. ipForwardPolicy OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The general set of conditions that would cause the selection of one multipath route (set of next hops for a given destination) is referred to as 'policy'. Unless the mechanism indicated by ipForwardPro- to specifies otherwise, the policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30 Protocols defining 'policy' otherwise must ei- ther define a set of values which are valid for this object or must implement an integer- instanced policy table for which this object's value acts as an index." ::= { ipForwardEntry 3 } ipForwardNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0." ::= { ipForwardEntry 4 } ipForwardIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The ifIndex value which identifies the local interface through which the next hop of this route should be reached." DEFVAL { 0 } ::= { ipForwardEntry 5 } ipForwardType OBJECT-TYPE SYNTAX INTEGER { other (1), -- not specified by this MIB invalid (2), -- logically deleted local (3), -- local interface remote (4) -- remote destination } MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipForwardTable object. That is, it effectively disassociates the destination identified with said entry from the route iden- tified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not current- ly in use. Proper interpretation of such en- tries requires examination of the relevant ip- ForwardType object." DEFVAL { invalid } ::= { ipForwardEntry 6 } ipForwardProto OBJECT-TYPE SYNTAX INTEGER { other (1), -- not specified local (2), -- local interface netmgmt (3), -- static route icmp (4), -- result of ICMP Redirect -- the following are all dynamic -- routing protocols egp (5), -- Exterior Gateway Protocol ggp (6), -- Gateway-Gateway Protocol hello (7), -- FuzzBall HelloSpeak rip (8), -- Berkeley RIP or RIP-II is-is (9), -- Dual IS-IS es-is (10), -- ISO 9542 ciscoIgrp (11), -- Cisco IGRP bbnSpfIgp (12), -- BBN SPF IGP ospf (13), -- Open Shortest Path First bgp (14), -- Border Gateway Protocol idpr (15) -- InterDomain Policy Routing } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols." ::= { ipForwardEntry 7 } ipForwardAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned." DEFVAL { 0 } ::= { ipForwardEntry 8 } ipForwardInfo OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS obsolete DESCRIPTION "A reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the route's ipForwardProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identif- ier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value." ::= { ipForwardEntry 9 } ipForwardNextHopAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The Autonomous System Number of the Next Hop. When this is unknown or not relevant to the protocol indicated by ipForwardProto, zero." DEFVAL { 0 } ::= { ipForwardEntry 10 } ipForwardMetric1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipForwardProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { ipForwardEntry 11 } ipForwardMetric2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS obsolete DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipForwardProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { ipForwardEntry 12 } ipForwardMetric3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS obsolete DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipForwardProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { ipForwardEntry 13 } ipForwardMetric4 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS obsolete DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipForwardProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { ipForwardEntry 14 } ipForwardMetric5 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS obsolete DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipForwardProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { ipForwardEntry 15 } -- Obsoleted Definitions - Groups -- compliance statements ipForwardOldCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for SNMP entities which implement the ipForward MIB." MODULE -- this module MANDATORY-GROUPS { ipForwardMultiPathGroup } ::= { ipForwardCompliances 2 } ipForwardMultiPathGroup OBJECT-GROUP OBJECTS { ipForwardNumber, ipForwardDest, ipForwardMask, ipForwardPolicy, ipForwardNextHop, ipForwardIfIndex, ipForwardType, ipForwardProto, ipForwardAge, ipForwardInfo, ipForwardNextHopAS, ipForwardMetric1, ipForwardMetric2, ipForwardMetric3, ipForwardMetric4, ipForwardMetric5 } STATUS obsolete DESCRIPTION "IP Multipath Route Table." ::= { ipForwardGroups 2 } END