MPLS-LDP-GENERIC-STD-MIB.mib object view, vendor RFC
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file MPLS-LDP-GENERIC-STD-MIB and use it to monitor vendor specific OID's.
MPLS-LDP-GENERIC-STD-MIB file content
Object view of MPLS-LDP-GENERIC-STD-MIB:
| Scalar Object |
| mplsLdpEntityGenericLREntry |
.1.3.6.1.2.1.10.166.7.1.1.1.1 |
|
A row in the LDP Entity Generic Label
Range (LR) Table. One entry in this table contains
information on a single range of labels
represented by the configured Upper and Lower
Bounds pairs. NOTE: there is NO corresponding
LDP message which relates to the information
in this table, however, this table does provide
a way for a user to 'reserve' a generic label
range.
NOTE: The ranges for a specific LDP Entity
are UNIQUE and non-overlapping.
A row will not be created unless a unique and
non-overlapping range is specified.
|
| Tabular Object |
| mplsLdpEntityGenericLRMin |
.1.3.6.1.2.1.10.166.7.1.1.1.1.1 |
|
The minimum label configured for this range.
|
| mplsLdpEntityGenericLRMax |
.1.3.6.1.2.1.10.166.7.1.1.1.1.2 |
|
The maximum label configured for this range.
|
| mplsLdpEntityGenericLabelSpace |
.1.3.6.1.2.1.10.166.7.1.1.1.1.3 |
|
This value of this object is perPlatform(1), then
this means that the label space type is
per platform.
If this object is perInterface(2), then this
means that the label space type is per Interface.
|
| mplsLdpEntityGenericIfIndexOrZero |
.1.3.6.1.2.1.10.166.7.1.1.1.1.4 |
|
This value represents either the InterfaceIndex of
the 'ifLayer' where these Generic Label would be created,
or 0 (zero). The value of zero means that the
InterfaceIndex is not known.
However, if the InterfaceIndex is known,
then it must be represented by this value.
If an InterfaceIndex becomes known, then the
network management entity (e.g., SNMP agent) responsible
for this object MUST change the value from 0 (zero) to the
value of the InterfaceIndex.
|
| mplsLdpEntityGenericLRStorageType |
.1.3.6.1.2.1.10.166.7.1.1.1.1.5 |
|
The storage type for this conceptual row.
Conceptual rows having the value 'permanent(4)'
need not allow write-access to any columnar
objects in the row.
|
| mplsLdpEntityGenericLRRowStatus |
.1.3.6.1.2.1.10.166.7.1.1.1.1.6 |
|
The status of this conceptual row. All writable
objects in this row may be modified at any time,
however, as described in detail in the section
entitled, 'Changing Values After Session
Establishment', and again described in the
DESCRIPTION clause of the mplsLdpEntityAdminStatus object,
if a session has been initiated with a Peer,
changing objects in this table will
wreak havoc with the session and interrupt traffic.
To repeat again: the recommended procedure is
to set the mplsLdpEntityAdminStatus to
down, thereby explicitly causing a
session to be torn down. Then, change objects
in this entry, then set the mplsLdpEntityAdminStatus
to enable which enables a new session to be initiated.
There must exist at least one entry in this
table for every LDP Entity that has a
generic label configured.
|
| Table |
| mplsLdpEntityGenericLRTable |
.1.3.6.1.2.1.10.166.7.1.1.1 |
|
The MPLS LDP Entity Generic Label Range (LR)
Table.
The purpose of this table is to provide a mechanism
for configurating a contiguous range of generic labels,
or a 'label range' for LDP Entities.
LDP Entities which use Generic Labels must have at least
one entry in this table. In other words, this table
'extends' the mpldLdpEntityTable for Generic Labels.
|
| Object Identifier |
| mplsLdpGenericStdMIB |
.1.3.6.1.2.1.10.166.7 |
|
Copyright (C) The Internet Society (year). The
initial version of this MIB module was published
in RFC 3815. For full legal notices see the RFC
itself or see:
http://www.ietf.org/copyrights/ianamib.html
This MIB contains managed object definitions for
configuring and monitoring the Multiprotocol Label
Switching (MPLS), Label Distribution Protocol (LDP),
utilizing ethernet as the Layer 2 media.
|
| mplsLdpGenericObjects |
.1.3.6.1.2.1.10.166.7.1 |
| mplsLdpGenericConformance |
.1.3.6.1.2.1.10.166.7.2 |
| mplsLdpEntityGenericObjects |
.1.3.6.1.2.1.10.166.7.1.1 |
| mplsLdpGenericGroups |
.1.3.6.1.2.1.10.166.7.2.1 |
| mplsLdpGenericCompliances |
.1.3.6.1.2.1.10.166.7.2.2 |
| Group |
| mplsLdpGenericGroup |
.1.3.6.1.2.1.10.166.7.2.1.1 |
|
Objects that apply to all MPLS LDP implementations
using Generic Labels as the Layer 2.
|
