You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > RFC > PPP-BRIDGE-NCP-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

PPP-BRIDGE-NCP-MIB by vendor RFC

PPP-BRIDGE-NCP-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing PPP-BRIDGE-NCP-MIB.


Vendor: RFC
Mib: PPP-BRIDGE-NCP-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- WinAgents MIB Extraction Wizard
-- Extracted from rfc1474.txt 16.03.2005 20:20:18

PPP-BRIDGE-NCP-MIB DEFINITIONS ::= BEGIN

IMPORTS
     Counter
          FROM RFC1155-SMI
     ifIndex
          FROM RFC1213-MIB
     OBJECT-TYPE
          FROM RFC-1212
     ppp
          FROM PPP-LCP-MIB;

     pppBridge OBJECT IDENTIFIER ::= { ppp 4 }

--
-- The PPP Bridge NCP Group.
-- Implementation of this group is mandatory for all
-- PPP implementations that support MAC Bridging  over
-- PPP (RFC1220).
--

-- The following object reflect the values of the option
-- parameters used in the PPP Link Control Protocol
--   pppBridgeLocalToRemoteTinygramCompression
--   pppBridgeRemoteToLocalTinygramCompression
--   pppBridgeLocalToRemoteLanId
--   pppBridgeRemoteToLocalLanId
--
-- These values are not available until after the PPP Option

-- negotiation has completed, which is indicated by the link
-- reaching the open state (i.e. pppBridgeOperStatus is set to
-- opened).
--
-- Therefore, when pppBridgeOperStatus is not opened
-- the contents of these objects is undefined. The value
-- returned when accessing the objects is an implementation
-- dependent issue.


pppBridgeTable   OBJECT-TYPE
     SYNTAX    SEQUENCE OF PppBridgeEntry
     ACCESS    not-accessible
     STATUS    mandatory
     DESCRIPTION
               "Table containing the parameters and statistics
               for the local PPP entity that are related to
               the operation of Bridging over the PPP."
     ::= { pppBridge 1 }


pppBridgeEntry   OBJECT-TYPE
     SYNTAX    PppBridgeEntry
     ACCESS    not-accessible
     STATUS    mandatory
     DESCRIPTION
               "Bridging information for a particular PPP
               link."
     INDEX     { ifIndex }
     ::= { pppBridgeTable 1 }


PppBridgeEntry ::= SEQUENCE {
     pppBridgeOperStatus
          INTEGER,
     pppBridgeLocalToRemoteTinygramCompression
          INTEGER,
     pppBridgeRemoteToLocalTinygramCompression
          INTEGER,
     pppBridgeLocalToRemoteLanId
          INTEGER,
     pppBridgeRemoteToLocalLanId
          INTEGER
}

pppBridgeOperStatus   OBJECT-TYPE
     SYNTAX    INTEGER {opened(1), not-opened(2)}
     ACCESS    read-only

     STATUS    mandatory
     DESCRIPTION
               "The operational status of the Bridge network
               protocol. If the value of this object is up
               then the finite state machine for the Bridge
               network protocol has reached the Opened state."
     ::= { pppBridgeEntry 1 }


pppBridgeLocalToRemoteTinygramCompression   OBJECT-TYPE
     SYNTAX    INTEGER { false(1), true(2) }
     ACCESS    read-only
     STATUS    mandatory
     DESCRIPTION
               "Indicates whether the local node will perform
               Tinygram Compression when sending packets to
               the remote entity. If false then the local
               entity will not perform Tinygram Compression.
               If true then the local entity will perform
               Tinygram Compression. The value of this object
               is meaningful only when the link has reached
               the open state (pppBridgeOperStatus is
               opened)."
     REFERENCE
               "Section 6.7, Tinygram Compression Option, of
               RFC1220"
     ::= { pppBridgeEntry 2 }


pppBridgeRemoteToLocalTinygramCompression   OBJECT-TYPE
     SYNTAX    INTEGER { false(1), true(2) }
     ACCESS    read-only
     STATUS    mandatory
     DESCRIPTION
               "If false(1) then the remote entity is not
               expected to perform Tinygram Compression. If
               true then the remote entity is expected to
               perform Tinygram Compression. The value of this
               object is meaningful only when the link has
               reached the open state (pppBridgeOperStatus is
               opened)."
     REFERENCE
               "Section 6.7, Tinygram Compression Option, of
               RFC1220"
     ::= { pppBridgeEntry 3 }




pppBridgeLocalToRemoteLanId   OBJECT-TYPE
     SYNTAX    INTEGER { false(1), true(2) }
     ACCESS    read-only
     STATUS    mandatory
     DESCRIPTION
               "Indicates whether the local node will include
               the LAN Identification field in transmitted
               packets or not. If false(1) then the local node
               will not transmit this field, true(2) means
               that the field will be transmitted. The value
               of this object is meaningful only when the link
               has reached the open state (pppBridgeOperStatus
               is opened)."
     REFERENCE
               "Section 6.8, LAN Identification Option, of
               RFC1220"
     ::= { pppBridgeEntry 4 }


pppBridgeRemoteToLocalLanId   OBJECT-TYPE
     SYNTAX    INTEGER { false(1), true(2) }
     ACCESS    read-only
     STATUS    mandatory
     DESCRIPTION
               "Indicates whether the remote node has
               indicated that it will include the LAN
               Identification field in transmitted packets or
               not. If false(1) then the field will not be
               transmitted, if true(2) then the field will be
               transmitted. The value of this object is
               meaningful only when the link has reached the
               open state (pppBridgeOperStatus is opened)."
     REFERENCE
               "Section 6.8, LAN Identification Option, of
               RFC1220"
     ::= { pppBridgeEntry 5 }


--
-- The PPP Bridge Configuration table
--

pppBridgeConfigTable   OBJECT-TYPE
     SYNTAX    SEQUENCE OF PppBridgeConfigEntry
     ACCESS    not-accessible
     STATUS    mandatory
     DESCRIPTION
               "Table containing the parameters and statistics

               for the local PPP entity that are related to
               the operation of Bridging over the PPP."
     ::= { pppBridge 2 }


pppBridgeConfigEntry   OBJECT-TYPE
     SYNTAX    PppBridgeConfigEntry
     ACCESS    not-accessible
     STATUS    mandatory
     DESCRIPTION
               "Bridging Configuration information for a
               particular PPP link."
     INDEX     { ifIndex }
     ::= { pppBridgeConfigTable 1 }


PppBridgeConfigEntry ::= SEQUENCE {
     pppBridgeConfigAdminStatus
          INTEGER,
     pppBridgeConfigTinygram
          INTEGER,
     pppBridgeConfigRingId
          INTEGER,
     pppBridgeConfigLineId
          INTEGER,
     pppBridgeConfigLanId
          INTEGER
}


pppBridgeConfigAdminStatus   OBJECT-TYPE
     SYNTAX    INTEGER { open(1), close(2) }
     ACCESS    read-write
     STATUS    mandatory
     DESCRIPTION
               "The immediate desired status of the Bridging
               network protocol. Setting this object to open
               will inject an administrative open event into
               the Bridging network protocol's finite state
               machine. Setting this object to close will
               inject an administrative close event into the
               Bridging network protocol's finite state
               machine."
     ::= { pppBridgeConfigEntry 1 }


pppBridgeConfigTinygram   OBJECT-TYPE
     SYNTAX    INTEGER { false(1), true(2) }

     ACCESS    read-write
     STATUS    mandatory
     DESCRIPTION
               "If false then the local BNCP entity will not
               initiate the Tinygram Compression Option
               Negotiation. If true then the local BNCP entity
               will initiate negotiation of this option."
     REFERENCE
               "Section 6.7, Tinygram Compression Option, of
               RFC1220"
     DEFVAL    { true }
     ::= { pppBridgeConfigEntry 2 }


pppBridgeConfigRingId   OBJECT-TYPE
     SYNTAX    INTEGER { false(1), true(2) }
     ACCESS    read-write
     STATUS    mandatory
     DESCRIPTION
               "If false then the local PPP Entity will not
               initiate a Remote Ring Identification Option
               negotiation. If true then the local PPP entity
               will intiate this negotiation. This MIB object
               is relevant only if the interface is for 802.5
               Token Ring bridging."
     REFERENCE
               "Section 6.4, IEEE 802.5 Remote Ring
               Identification Option, of RFC1220"
     DEFVAL    { false }
     ::= { pppBridgeConfigEntry 3 }


pppBridgeConfigLineId   OBJECT-TYPE
     SYNTAX    INTEGER { false(1), true(2) }
     ACCESS    read-write
     STATUS    mandatory
     DESCRIPTION
               "If false then the local PPP Entity is not to
               initiate a Line Identification Option
               negotiation. If true then the local PPP entity
               will intiate this negotiation. This MIB object
               is relevant only if the interface is for 802.5
               Token Ring bridging."
     REFERENCE
               "Section 6.5, IEEE 802.5 Line Identification
               Option, of RFC1220"
     DEFVAL    { false }
     ::= { pppBridgeConfigEntry 4 }

pppBridgeConfigLanId   OBJECT-TYPE
     SYNTAX    INTEGER { false(1), true(2) }
     ACCESS    read-write
     STATUS    mandatory
     DESCRIPTION
               "If false then the local BNCP entity will not
               initiate the LAN Identification Option
               Negotiation. If true then the local BNCP entity
               will initiate negotiation of this option."
     REFERENCE
               "Section 6.8, LAN Identification Option, of
               RFC1220"
     DEFVAL    { false }
     ::= { pppBridgeConfigEntry 5 }


--
-- The PPP Bridge Media Status Table
--

pppBridgeMediaTable   OBJECT-TYPE
     SYNTAX    SEQUENCE OF PppBridgeMediaEntry
     ACCESS    not-accessible
     STATUS    mandatory
     DESCRIPTION
               "Table identifying which MAC media types are
               enabled for the Bridging NCPs."
     ::= { pppBridge 3 }


pppBridgeMediaEntry   OBJECT-TYPE
     SYNTAX    PppBridgeMediaEntry
     ACCESS    not-accessible
     STATUS    mandatory
     DESCRIPTION
               "Status of a specific MAC Type for a specific
               PPP Link."
     INDEX     { ifIndex, pppBridgeMediaMacType }
     ::= { pppBridgeMediaTable 1 }


PppBridgeMediaEntry ::= SEQUENCE {
     pppBridgeMediaMacType
          INTEGER,
     pppBridgeMediaLocalStatus
          INTEGER,
     pppBridgeMediaRemoteStatus
          INTEGER

}

pppBridgeMediaMacType   OBJECT-TYPE
     SYNTAX    INTEGER(0..2147483647)
     ACCESS    read-only
     STATUS    mandatory
     DESCRIPTION
               "The MAC type for which this entry in the
               pppBridgeMediaTable is providing status
               information. Valid values for this object are
               defined in Section 6.6 MAC Type Support
               Selection of RFC1220 (Bridging Point-to-Point
               Protocol)."
     REFERENCE
               "Section 6.6, MAC Type Support Selection, of
               RFC1212."
     ::= { pppBridgeMediaEntry 1 }


pppBridgeMediaLocalStatus   OBJECT-TYPE
     SYNTAX    INTEGER { accept(1), dont-accept(2) }
     ACCESS    read-only
     STATUS    mandatory
     DESCRIPTION
               "Indicates whether the local PPP Bridging
               Entity will accept packets of the protocol type
               identified in pppBridgeMediaMacType on the PPP
               link identified by ifIndex or not. If this
               object is accept then any packets of the
               indicated MAC type will be received and
               properly processed. If this object is dont-
               accept then received packets of the indicated
               MAC type will not be properly processed."
     REFERENCE
               "Section 6.6, MAC Type Support Selection, of
               RFC1212."
     ::= { pppBridgeMediaEntry 2 }


pppBridgeMediaRemoteStatus   OBJECT-TYPE
     SYNTAX    INTEGER { accept(1), dont-accept(2) }
     ACCESS    read-only
     STATUS    mandatory
     DESCRIPTION
               "Indicates whether the local PPP Bridging
               Entity believes that the remote PPP Bridging
               Entity will accept packets of the protocol type
               identified in pppBridgeMediaMacType on the PPP

               link identified by ifIndex or not."
     REFERENCE
               "Section 6.6, MAC Type Support Selection, of
               RFC1212."
     ::= { pppBridgeMediaEntry 3 }


--
-- The PPP Bridge Media Configuration Table
--

pppBridgeMediaConfigTable   OBJECT-TYPE
     SYNTAX    SEQUENCE OF PppBridgeMediaConfigEntry
     ACCESS    not-accessible
     STATUS    mandatory
     DESCRIPTION
               "Table identifying which MAC media types are
               enabled for the Bridging NCPs."
     ::= { pppBridge 4 }


pppBridgeMediaConfigEntry   OBJECT-TYPE
     SYNTAX    PppBridgeMediaConfigEntry
     ACCESS    not-accessible
     STATUS    mandatory
     DESCRIPTION
               "Status of a specific MAC Type for a specific
               PPP Link."
     INDEX     { ifIndex, pppBridgeMediaConfigMacType }
     ::= { pppBridgeMediaConfigTable 1 }


PppBridgeMediaConfigEntry ::= SEQUENCE {
     pppBridgeMediaConfigMacType
          INTEGER,
     pppBridgeMediaConfigLocalStatus
          INTEGER
}


pppBridgeMediaConfigMacType   OBJECT-TYPE
     SYNTAX    INTEGER(0..2147483647)
     ACCESS    read-write
     STATUS    mandatory
     DESCRIPTION
               "The MAC type for which this entry in the
               pppBridgeMediaConfigTable is providing status
               information. Valid values for this object are

               defined in Section 6.6 MAC Type Support
               Selection of RFC1220 (Bridging Point-to-Point
               Protocol)."
     REFERENCE
               "Section 6.6, MAC Type Support Selection, of
               RFC1212."
     ::= { pppBridgeMediaConfigEntry 1 }


pppBridgeMediaConfigLocalStatus   OBJECT-TYPE
     SYNTAX    INTEGER { accept(1), dont-accept(2) }
     ACCESS    read-write
     STATUS    mandatory
     DESCRIPTION
               "Indicates whether the local PPP Bridging
               Entity should accept packets of the protocol
               type identified in pppBridgeMediaConfigMacType
               on the PPP link identified by ifIndex or not.
               Setting this object to the value dont-accept
               has the affect of invalidating the
               corresponding entry in the
               pppBridgeMediaConfigTable object. It is an
               implementation-specific matter as to whether
               the agent removes an invalidated entry from the
               table. Accordingly, management stations must be
               prepared to receive tabular information from
               agents that corresponds to entries not
               currently in use. Changing this object will
               have effect when the link is next restarted."
     REFERENCE
               "Section 6.6, MAC Type Support Selection, of
               RFC1212."
     ::= { pppBridgeMediaConfigEntry 2 }


END