pppLinkStatusPhysicalIndex |
.1.3.6.1.2.1.10.23.1.1.1.1.1 |
The value of ifIndex that identifies the
lower-level interface over which this PPP Link
is operating. This interface would usually be
an HDLC or RS-232 type of interface. If there
is no lower-layer interface element, or there
is no ifEntry for the element, or the element
can not be identified, then the value of this
object is 0. For example, suppose that PPP is
operating over a serial port. This would use
two entries in the ifTable. The PPP could be
running over `interface' number 123 and the
serial port could be running over `interface'
number 987. Therefore, ifSpecific.123 would
contain the OBJECT IDENTIFIER ppp
pppLinkStatusPhysicalIndex.123 would contain
987, and ifSpecific.987 would contain the
OBJECT IDENTIFIER for the serial-port's media-
specific MIB.
|
pppLinkStatusBadAddresses |
.1.3.6.1.2.1.10.23.1.1.1.1.2 |
The number of packets received with an
incorrect Address Field. This counter is a
component of the ifInErrors variable that is
associated with the interface that represents
this PPP Link.
|
pppLinkStatusBadControls |
.1.3.6.1.2.1.10.23.1.1.1.1.3 |
The number of packets received on this link
with an incorrect Control Field. This counter
is a component of the ifInErrors variable that
is associated with the interface that
represents this PPP Link.
|
pppLinkStatusPacketTooLongs |
.1.3.6.1.2.1.10.23.1.1.1.1.4 |
The number of received packets that have been
discarded because their length exceeded the
MRU. This counter is a component of the
ifInErrors variable that is associated with the
interface that represents this PPP Link. NOTE,
packets which are longer than the MRU but which
are successfully received and processed are NOT
included in this count.
|
pppLinkStatusBadFCSs |
.1.3.6.1.2.1.10.23.1.1.1.1.5 |
The number of received packets that have been
discarded due to having an incorrect FCS. This
counter is a component of the ifInErrors
variable that is associated with the interface
that represents this PPP Link.
|
pppLinkStatusLocalMRU |
.1.3.6.1.2.1.10.23.1.1.1.1.6 |
The current value of the MRU for the local PPP
Entity. This value is the MRU that the remote
entity is using when sending packets to the
local PPP entity. The value of this object is
meaningful only when the link has reached the
open state (ifOperStatus is up).
|
pppLinkStatusRemoteMRU |
.1.3.6.1.2.1.10.23.1.1.1.1.7 |
The current value of the MRU for the remote
PPP Entity. This value is the MRU that the
local entity is using when sending packets to
the remote PPP entity. The value of this object
is meaningful only when the link has reached
the open state (ifOperStatus is up).
|
pppLinkStatusLocalToPeerACCMap |
.1.3.6.1.2.1.10.23.1.1.1.1.8 |
The current value of the ACC Map used for
sending packets from the local PPP entity to
the remote PPP entity. The value of this object
is meaningful only when the link has reached
the open state (ifOperStatus is up).
|
pppLinkStatusPeerToLocalACCMap |
.1.3.6.1.2.1.10.23.1.1.1.1.9 |
The ACC Map used by the remote PPP entity when
transmitting packets to the local PPP entity.
The value of this object is meaningful only
when the link has reached the open state
(ifOperStatus is up).
|
pppLinkStatusLocalToRemoteProtocolCompression |
.1.3.6.1.2.1.10.23.1.1.1.1.10 |
Indicates whether the local PPP entity will
use Protocol Compression when transmitting
packets to the remote PPP entity. The value of
this object is meaningful only when the link
has reached the open state (ifOperStatus is
up).
|
pppLinkStatusRemoteToLocalProtocolCompression |
.1.3.6.1.2.1.10.23.1.1.1.1.11 |
Indicates whether the remote PPP entity will
use Protocol Compression when transmitting
packets to the local PPP entity. The value of
this object is meaningful only when the link
has reached the open state (ifOperStatus is
up).
|
pppLinkStatusLocalToRemoteACCompression |
.1.3.6.1.2.1.10.23.1.1.1.1.12 |
Indicates whether the local PPP entity will
use Address and Control Compression when
transmitting packets to the remote PPP entity.
The value of this object is meaningful only
when the link has reached the open state
(ifOperStatus is up).
|
pppLinkStatusRemoteToLocalACCompression |
.1.3.6.1.2.1.10.23.1.1.1.1.13 |
Indicates whether the remote PPP entity will
use Address and Control Compression when
transmitting packets to the local PPP entity.
The value of this object is meaningful only
when the link has reached the open state
(ifOperStatus is up).
|
pppLinkStatusTransmitFcsSize |
.1.3.6.1.2.1.10.23.1.1.1.1.14 |
The size of the Frame Check Sequence (FCS) in
bits that the local node will generate when
sending packets to the remote node. The value
of this object is meaningful only when the link
has reached the open state (ifOperStatus is
up).
|
pppLinkStatusReceiveFcsSize |
.1.3.6.1.2.1.10.23.1.1.1.1.15 |
The size of the Frame Check Sequence (FCS) in
bits that the remote node will generate when
sending packets to the local node. The value of
this object is meaningful only when the link
has reached the open state (ifOperStatus is
up).
|
pppLinkConfigInitialMRU |
.1.3.6.1.2.1.10.23.1.1.2.1.1 |
The initial Maximum Receive Unit (MRU) that
the local PPP entity will advertise to the
remote entity. If the value of this variable is
0 then the local PPP entity will not advertise
any MRU to the remote entity and the default
MRU will be assumed. Changing this object will
have effect when the link is next restarted.
|
pppLinkConfigReceiveACCMap |
.1.3.6.1.2.1.10.23.1.1.2.1.2 |
The Asynchronous-Control-Character-Map (ACC)
that the local PPP entity requires for use on
its receive side. In effect, this is the ACC
Map that is required in order to ensure that
the local modem will successfully receive all
characters. The actual ACC map used on the
receive side of the link will be a combination
of the local node's pppLinkConfigReceiveACCMap
and the remote node's
pppLinkConfigTransmitACCMap. Changing this
object will have effect when the link is next
restarted.
|
pppLinkConfigTransmitACCMap |
.1.3.6.1.2.1.10.23.1.1.2.1.3 |
The Asynchronous-Control-Character-Map (ACC)
that the local PPP entity requires for use on
its transmit side. In effect, this is the ACC
Map that is required in order to ensure that
all characters can be successfully transmitted
through the local modem. The actual ACC map
used on the transmit side of the link will be a
combination of the local node's
pppLinkConfigTransmitACCMap and the remote
node's pppLinkConfigReceiveACCMap. Changing
this object will have effect when the link is
next restarted.
|
pppLinkConfigMagicNumber |
.1.3.6.1.2.1.10.23.1.1.2.1.4 |
If true(2) then the local node will attempt to
perform Magic Number negotiation with the
remote node. If false(1) then this negotiation
is not performed. In any event, the local node
will comply with any magic number negotiations
attempted by the remote node, per the PPP
specification. Changing this object will have
effect when the link is next restarted.
|
pppLinkConfigFcsSize |
.1.3.6.1.2.1.10.23.1.1.2.1.5 |
The size of the FCS, in bits, the local node
will attempt to negotiate for use with the
remote node. Regardless of the value of this
object, the local node will comply with any FCS
size negotiations initiated by the remote node,
per the PPP specification. Changing this object
will have effect when the link is next
restarted.
|
pppLqrQuality |
.1.3.6.1.2.1.10.23.1.2.1.1.1 |
The current quality of the link as declared by
the local PPP entity's Link-Quality Management
modules. No effort is made to define good or
bad, nor the policy used to determine it. The
not-determined value indicates that the entity
does not actually evaluate the link's quality.
This value is used to disambiguate the
`determined to be good' case from the `no
determination made and presumed to be good'
case.
|
pppLqrInGoodOctets |
.1.3.6.1.2.1.10.23.1.2.1.1.2 |
The LQR InGoodOctets counter for this link.
|
pppLqrLocalPeriod |
.1.3.6.1.2.1.10.23.1.2.1.1.3 |
The LQR reporting period, in hundredths of a
second that is in effect for the local PPP
entity.
|
pppLqrRemotePeriod |
.1.3.6.1.2.1.10.23.1.2.1.1.4 |
The LQR reporting period, in hundredths of a
second, that is in effect for the remote PPP
entity.
|
pppLqrOutLQRs |
.1.3.6.1.2.1.10.23.1.2.1.1.5 |
The value of the OutLQRs counter on the local
node for the link identified by ifIndex.
|
pppLqrInLQRs |
.1.3.6.1.2.1.10.23.1.2.1.1.6 |
The value of the InLQRs counter on the local
node for the link identified by ifIndex.
|
pppLqrConfigPeriod |
.1.3.6.1.2.1.10.23.1.2.2.1.1 |
The LQR Reporting Period that the local PPP
entity will attempt to negotiate with the
remote entity, in units of hundredths of a
second. Changing this object will have effect
when the link is next restarted.
|
pppLqrConfigStatus |
.1.3.6.1.2.1.10.23.1.2.2.1.2 |
If enabled(2) then the local node will attempt
to perform LQR negotiation with the remote
node. If disabled(1) then this negotiation is
not performed. In any event, the local node
will comply with any magic number negotiations
attempted by the remote node, per the PPP
specification. Changing this object will have
effect when the link is next restarted.
Setting this object to the value disabled(1)
has the effect of invalidating the
corresponding entry in the pppLqrConfigTable
object. It is an implementation-specific matter
as to whether the agent removes an invalidated
entry from the table. Accordingly, management
stations must be prepared to receive tabular
information from agents that corresponds to
entries not currently in use.
|
pppLqrExtnsLastReceivedLqrPacket |
.1.3.6.1.2.1.10.23.1.2.3.1.1 |
This object contains the most recently
received LQR packet. The format of the packet
is as described in the LQM Protocol
specificiation. All fields of the packet,
including the `save' fields, are stored in this
object.
The LQR packet is stored in network byte order.
The LAP-B and PPP headers are not stored in
this object; the first four octets of this
variable contain the Magic-Number field, the
second four octets contain the LastOutLQRs
field and so on. The last four octets of this
object contain the SaveInOctets field of the
LQR packet.
|