RFC1318-MIB.mib object view, vendor RFC
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file RFC1318-MIB and use it to monitor vendor specific OID's.
RFC1318-MIB file content
Object view of RFC1318-MIB:
| Scalar Object |
| paraNumber |
.1.3.6.1.2.1.10.34.1 |
|
The number of ports (regardless of their current
state) in the Parallel-printer-like port table.
|
| paraPortEntry |
.1.3.6.1.2.1.10.34.2.1 |
|
Status and parameter values for a port.
|
| paraInSigEntry |
.1.3.6.1.2.1.10.34.3.1 |
|
Input control signal status for a hardware port.
|
| paraOutSigEntry |
.1.3.6.1.2.1.10.34.4.1 |
|
Output control signal status for a hardware port.
|
| Tabular Object |
| paraPortIndex |
.1.3.6.1.2.1.10.34.2.1.1 |
|
A unique value for each port. Its value ranges
between 1 and the value of paraNumber. By
convention and if possible, hardware port numbers
map directly to external connectors. The value for
each port must remain constant at least from one
re-initialization of the network management agent to
the next.
|
| paraPortType |
.1.3.6.1.2.1.10.34.2.1.2 |
|
The port's hardware type.
|
| paraPortInSigNumber |
.1.3.6.1.2.1.10.34.2.1.3 |
|
The number of input signals for the port in the
input signal table (paraPortInSigTable). The table
contains entries only for those signals the software
can detect.
|
| paraPortOutSigNumber |
.1.3.6.1.2.1.10.34.2.1.4 |
|
The number of output signals for the port in the
output signal table (paraPortOutSigTable). The
table contains entries only for those signals the
software can assert.
|
| paraInSigPortIndex |
.1.3.6.1.2.1.10.34.3.1.1 |
|
The value of paraPortIndex for the port to which
this entry belongs.
|
| paraInSigName |
.1.3.6.1.2.1.10.34.3.1.2 |
|
Identification of a hardware signal.
|
| paraInSigState |
.1.3.6.1.2.1.10.34.3.1.3 |
|
The current signal state.
|
| paraInSigChanges |
.1.3.6.1.2.1.10.34.3.1.4 |
|
The number of times the signal has changed from
'on' to 'off' or from 'off' to 'on'.
|
| paraOutSigPortIndex |
.1.3.6.1.2.1.10.34.4.1.1 |
|
The value of paraPortIndex for the port to which
this entry belongs.
|
| paraOutSigName |
.1.3.6.1.2.1.10.34.4.1.2 |
|
Identification of a hardware signal.
|
| paraOutSigState |
.1.3.6.1.2.1.10.34.4.1.3 |
|
The current signal state.
|
| paraOutSigChanges |
.1.3.6.1.2.1.10.34.4.1.4 |
|
The number of times the signal has changed from
'on' to 'off' or from 'off' to 'on'.
|
| Table |
| paraPortTable |
.1.3.6.1.2.1.10.34.2 |
|
A list of port entries. The number of entries is
given by the value of paraNumber.
|
| paraInSigTable |
.1.3.6.1.2.1.10.34.3 |
|
A list of port input control signal entries.
|
| paraOutSigTable |
.1.3.6.1.2.1.10.34.4 |
|
A list of port output control signal entries.
|
| Object Identifier |
| para |
.1.3.6.1.2.1.10.34 |
